|
| 1 | M&L for preparation of old distempered surfaces of wallsincludingwashing, rubbing down and stopping of nailholes and applying onecoat of oil bound distemper (oil emulsion) on walls complete all as specified and directed. |
| 2 | Complete removal of existing treatment of walls plastered or unplastered, washing, rubbin down and stopping of painted surfaces etc. and applying two coats of white wash on wallall as specified and as directed |
| 3 | M&L for preparation of old distempered surfaces of wallsincludingwashing, rubbing down and stopping of nailholes and applying two coats of oil emulsion distemper on walls complete all as specified |
| 4 | M & L for Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces. complete all as per specified and directed. |
| 5 | M & L for preparation ofold surfaces ofexterior wall by washing rubbing downand and applying two coat of cement based paintetc complete all as per specified and directed. |
| 6 | M&L for preparation of oldwooden surfaces of anydescription, not otherwise described, exceeding 10cm inwidth or girth and applying one coat of synthetic enamelpaint on wooden surfaces, complete all as specified and directed. |
| 7 | M&L for preparation of old steel and iron surfaces of any description exceeding 10 cm in width or girth and applying one coat of synthetic enamel paint on steel surfacescomplete all as specified and directed. |
| 8 | M&L for preparation of old steel surfaces of any description, not exc 10 cm width or girth, not otherwise described and applying one coat of synthetic enamel paint. |
| 9 | Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. |
| 10 | M&L 15 mm thick cementplaster on externalsurfaces on brick or concrete surfaces in CM 1:6 complete all as specified and directed. |
| 11 | S&F in repair 15mm bib taps, fancy type chromium platedwith crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed. |
| 12 | S&F in repairs 15 mm bore Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed. |
| 13 | S&F in repair 20mm bore stop valve cast copper alloy with handle screwed both ends for GI out let/inlet pipe or for union including threading to existing pipes on both ends complete all as specified and directed. |
| 14 | S&F in repair 15mm angle cock with flange cast copper alloy, chorminium plated, fancy type, screwed both ends for iron pipe or for union complete all as specified and directed. |
| 15 | S&F in repair 15mm dia stop cock fancy type cast copper alloy chromium plated, concealed type with long shankwith crutch or butterfly handle screwed down high pressure, screwed both ends for iron pipe complete all as specified & directed. |
| 16 | S&F in repair PVC overhead water tanks covers for 500 to 2000 ltrcapacity (as per sample) complete all as specified and directed |
| 17 | S&F in repair 20 mm bore PTMT ball valve, high pressure with epoxy coated aluminium rodand high density plastic ballscrewed for iron pipe and fixed in position complete all as specified . |
| 18 | S & Fin repairs 110 mm dia, PVC (SWR) single socketed rain water pipe in any length with rubber ring joints fixed to walls complete all as specified and directed |
| 19 | S&F 110mm borePVC (SWR) junction single, (single T) equal or unequal any radius complete all as specified and directed |
| 20 | S & F in repairs 110 mm dia, PVC bend complete all as specified and directed. |
| 21 | Taking upor down 15/16mm dia CPVC/KITEC/GI Tubing and connection including, cleaning for refixing or removal to storecomplete all as specified and directed. |
| 22 | Taking upor down 20mm diaCPVC/KITEC/GI Tubing and connection including, cleaning for refixing or removal to storecomplete all as specified and directed. |
| 23 | S&F 15mm bore mild steel galvanized tubing medium grade with all fittingsetc fixed to wallsand making good the distubed surface to match previous structure withcomplete all as specified and directed. |
| 24 | S&F 20mm bore mild steel galvanized tubing medium grade with all fittings such as nipple, union, socket, elbow, bends, etc fixed to walls iand making good the distubed surface to match previous structure withcomplete all as specified and directed. |
| 25 | S&F in repairvitreous Chinasquatting pan Orissa pattern, size 580 x 440mm white, with integral foot rest including provision of lime concrete bedding and connection to trap and to flushing pipe, anti syphonage pipe etc and making good to floorscomplete all as specified and directed |
| 26 | S&F in repairs vitreous china wash down water closet pan padestel pattern white including connection pipe to union of flushing cistern, inlet and overflow pipes,connecting only to flushing cistern anti-syphonage pipe with PVC flush pipe of 32mm diawith mild steel chromoum plated hinging and \"P\" or \"S\" trap device complete all as specified and directed |
| 27 | S&F in repairs stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aparture 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed |
| 28 | Hacking out old brioken glass any thickness any quality or description from wooden frame or stone concrete or bricks surrondingcomplete all as specified. |
| 29 | M&L for 3 mm thick, acrylic transparant sheet and glazing with oil putty or with wooden beads in squarescomplete all as specified and directed. |
| 30 | S&Fin replacement Rotational moulded polythylene 1000 capacity waterstorage tank(Cylindrical vertical with closed top) hoisted and fixed in position including PVC float valve 20 mm bore, high pressure with polythene ball & float& dismantling of old water tank complete all as specified and directed |
| 31 | S&F in Replacement Rotational moulded polythylene 500 capacity waterstorage tank(Cylindrical vertical with closed top) hoisted and fixed in position including PVC float valve 20 mm bore, high pressure with polythene ball & float& complete all as specified and directed |
| 32 | Taking down chowkats or frames including shutter (without taking off shutters from the frame) area n exc. 1.5 Sqm each incl iron mongry complete all as specified and directed |
| 33 | ~Ditto~ all as per item No.32 above but exc 1.50 Sqm n.exc 4 Sqm each complete all as specified and directed |
| 34 | Taking down shutters of any description exc 1 sqm and n exc 2 sqm each incl iron mongry complete all as specified and directed. |
| 35 | Taking down shutters of any description exc 1 sqm and n exc 2 sqm each including rescuring or eaising and adjusting and refixing in same opening after repair complete all as specified and directed. |
| 36 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge),minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof,water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge complete all as specified and directed. |
| 37 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/Chowkhat of size 50 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms)fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof,water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge |
| 38 | S&F 35mm thick 2nd class HW, glazed and skelton shutters open rebated and prepared to receive glass / gauge (without sash bar) edges of forming plain chamfered orrounded fitted with cut and mitred bead for securing glass / gauge etc size of shutter as per SSR part-1 section 8 clause 8.24(a). complete all as specified and directed. |
| 39 | S&F Factory made solid panel PVC door shutter 30mm (style) consisting of framemade out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded wood grain printed PVC sheet used 5mm thick x 15mm wide PVC sheet beading used inside stiles and rails and decorative PVC beading of 10mm x 10mm (90o) used instead of exposed portion of PVC sheet beading panelling of wood grain printed PVC sheets to be fitted in the MS frame welded sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement, supling & fixing in the frame at the site as per specification and drawing shown in SSR Pt-I complete all as specified and directed. |
| 40 | S&F for Providing and fixing factory made uPVC white colour fixed window made of extruded profiles with wall thickness of 2.3mm(+-0.2mm). Window profile with hollow section with multi chamber. Frame (60mm x58mm). T profile (Onevertical length in between two shutters) (60mm x 74mm). Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc. making arrangement for fixing of hardware, EPDM gasket.1.2 +–0.2mm thick, galvanized steel Frame (28mm x21.5mm), T profile (27mm x 17 mrn) to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners- 5mm thick glazing with selected quality glass (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories Net opening will be measured for payment purpose.)(a) Area of each window not exceeding2.00 sqm each complete all as specified and directed. |
| 41 | S&F Solid PVC door frame of size 50mm x 47mm made out of 5mm wood grain printed PVC sheet reinforced with MS square tube and edges will be painted to match with printed sheet fixing in opending as per specification and drawing etc complete all as specified and directed. |
| 42 | S&FMS butt hinges100mm long medium weight, cold rolled complete all as specified and directed. |
| 43 | S&F 150 mm long extruded alu alloy handles, fabricated type, anodised complete all as specified and directed. |
| 44 | S&F 300mm aluminium alloy, anodised, sliding door bolt with hasp, staple bolt type and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed. |
| 45 | S&F 150mm long Aluminium,anodized barrel tower bolts of extruded section and fixed complete all as specified and directed. |
| 46 | S&F 200mm longAluminium,anodized barrel tower bolts of extruded section and fixed complete all as specified and directed. |
| 47 | M&L Preparation of new wooden surfaces over 10cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 48 | Demolition of brick work or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed. |
| 49 | M&L Brick work using old bricks with sub class \"B\" bricks straightor curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed. |
| 50 | M & L for Cement concrete type B1, 1:2:4(using 20 mm graded aggregate) as in DPC/Coping/pedding /PCC floor etcand similar works including necessary form work complete all as specified. |
| 51 | M & L for Cement concrete type D-21:4:8(using 40 mm graded aggregate) as in foundation filling and mass concrete complete all as specified and directed. |
| 52 | M & L for Cement concrete 75 mm thick type C-21:3:6(using 40 mm graded aggregate) as in Plinth protection / Pavingfinished even and smooth with out using extra cement complete all as specified and directed. |
| 53 | Demolition of concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed. |
| 54 | S&F in repar 3.2/3.3 mm thick linoleum sheet coloured laid dry in floor includinf stretching, cutting and fittings ealed down with approved an adhesivecomplete all as specified and directed. |
| 55 | Dimantling of asbestos cement corrugated or semi corrugates asbostos sheets in roofingcomplete all as specified and directed. |
| 56 | Dimantling of timber scantling 40 sq cm and over in section in any position framed works complete all as specified and directed. |
| 57 | S&F for roof trusses (framed)trussed purlin, crane gantries,rails, and fastening and heavy brackets framing beam,tee,angle,chennal,or flat section , including tubular section etc complete all as specified and directed. |
| 58 | S&FFramed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed. |
| 59 | M&L Pre-painted galvatume aluminium zinc coating GI based corrugatged steel sheet 0.5mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 60 | M&L Pre-painted galvatume aluminium zinc coating GI based plainsteel sheet 0.5mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 61 | Schedule of credit of Amount Rs.71,045.00 to be deducted during AOC. |
