|
| 1 | Supply and fixing ofaluminium anodised door with frame and shutter, and glazing 5.0 mm thick plain glass and 12 mm thick prelaminated particle board exerior grade in bottom panel, rubber gasket, aluminium glazing clips, mortice lock, aluminium stopper cleat, iron mongary including taking down unserviceable existing door etc complete all as specified and directed. section of aluminium door shall be of following sizes: - Top;- 85x44.5x1.20 mm thick fixed with rawal plugwidth;- 85x44.5x1.20 mm thickBottom;- 100x44.5x1.20 mm thickStyle;- 85x44.5x1.20 mm thickGlazing beading;- 0.70 mm thickAluminium handle \"D\" type ;- 150mmAluminium tower bold 9.9 mm dia shoot 200 mm longMortice lock stainless steel - 100 mm 4 lever Aluminium stopper cleataluminium hinges 100 mm long Note;- (i) Making good of wall surface with matching to existing surface shall be included in the quoted rate for item complete all as specified ad directed.(ii) PCC shall be measured and paid seperately.(iii) Work will be carried out upto 5th storey.Make: (i) Anodised aluminum section : Jindal / Hindalko/ Indalco. (ii) Particle board: Green ply/Kit ply/ Century ply (iii) Glass: Saint gobain / Modi guard / Tata |
| 2 | Supply and fixing ofaluminium anodised partition with frame, (fixed type) shutter,and glazing 4.8 mm thick plain glass, and 12mm thick prelaminated particle board interior grade in bottom panell, glass fixed with rubber gasket with aluminium glazing clips & snap beading including taking down unserviceable existing partion etc complete all as specified and directed of following sizes;-Frame of vertical/horizontal section;- 44.5x44.5x1.22 mm thickBottuom section;-100x44.5x1.22 mm thickMake: (i) Anodised aluminum section : Jindal / Hindalko/ Indalco.(ii) Particle board: Green ply/Kit ply/ Century ply(iii) Glass: Saint gobain / Modi guard / Tata . (iv) Work will be carried out up to 5th storey |
| 3 | Taking down chowkhats or frames with shutter n. exc 1.5 sqm each without taking off shutter from the frame complete all as specified and directed |
| 4 | Taking down Chowkats with shutter of any description exceeding 1.50 Sqm but not exceeding 4.00 Sqm each (Without taking off shutters from the frame) complete all as specified and directed |
| 5 | Taking down shutter of any description,not exc. 1 Sqmeach complete all as specified and directed |
| 6 | Taking down shutter of any description,exc. 1 Sqmbut n. exe 2 sqm each complete all as specified and directed |
| 7 | Supply and fixing ofpressed steel frames of size 125x60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., framed filled in cement concrete1:2:4, type B-0 using 12.5 mm stone aggregate complete all as specified and as directed. |
| 8 | Supply and fixing of factory made 100% solid wood plastic composite (WPC) door frame of size 75 mm x 50 mm x 50 mm made from wood plastic composite (single extruded process) material with density 780 Kilogram/Cubic Metre from ISO certified company door should be water proof termite proof fire retardant and having good screw holding capacity all as specification and drawing complete all as specified and directed |
| 9 | Supply and fixing of30 mm thick moulded WPC factory made 100% solid door (confoRunning Metreing as per IS-4020) made from 100% lead free single extruded with 2, 4 or 6 raised panel design on the front side with 10 mm deep mould on single side with wood grain texture and back side palin with density not less than 600 Kilogram/Cubic Metre.Manufactured by an ISO : 9001-2015 certified company. The door should be water proof, termite proof, fireretardant and having screw holding capacity complete all as specified and directed. |
| 10 | Supply and fixing of 30 mm thick, factory made flush shutters, BWR solid core construction, with block board core and plywood face, pannels, commercial type on both sides including provision of suitable blocks for taking mortice locks, latches or other fittings complete all as specified and directed. |
| 11 | Supply and fixing of 35mm thick IIndclass hard wood(Golden Teak)plain fancy, framedpanelled shutter machine made with panels of timber flat on both sides feather edged supplied and fitted to chowkats complete all as specified and directed. |
| 12 | Supply and fixing of35 mm thick second class hardwood glazed and Skelton factory made door shutters, open rebated and prepared to receive glass/gauze etc divided into squares with plain, chamfered or rounded mitered and rebated sash bars, edges of framing plain, chamfered, fitting with cut and rebated beads for securing glass/ gauge complete all as specified in SSR Pt I-2009 section 8 clause 8.24 (a) complete all as specified and directed. |
| 13 | Taking down and re-fixing the existing shutter in same opening after & including necessary easing/repair etc. exc. 1 Sqm but n. exc. 2 Sqm each complete all as specified and directed. |
| 14 | Taking down Aluminium window shutter size n.exc 1 Sqm including opening up of the corner junctions and replacement of defective members (matching with existing material) alongwith necessary cleats, butt hinges and refixing in the same opening to make the window functional complete all as specified and directed. |
| 15 | Taking down Aluminium door shutter size exc 1 Sqm including opening up of the corner junctions and replacement of defective members (matching with existing material) alongwith necessary cleats, butt hinges and refixing in the same opening to make thedoor functional complete all a specified and directed. |
| 16 | Supply and fixing ofmild steel framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 including necessary welding, drilling hole complete all as specified and directed. |
| 17 | Supply and fixing ofPre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including dismantling of old sheets of any description complete all as specified and directed. |
| 18 | Supply and fixing ofmild steel plain black sheet 0.5 mm in wall cladding steel gates and similar work cut to size, holes, punched .including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joint and includingdismantling of old sheets of any descriptioncomplete all as specified and directed. |
| 19 | Dismantling of timber scantlings 40 Sqcm and over in section in any position and in any situation. (unframed work) complete all as specified and directed. |
| 20 | Supply and fixing ofsteel work in tubular trusses/purlin including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 gradeSt.-240complete all as specified and directed |
| 21 | Material and labourfor preparation of old untreated steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed |
| 22 | Material and labourfor preparation of new untreated steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primercomplete all as specified and directed |
| 23 | Supply and fixing of100 mm size stainless steel butt hinges 204 grade, and fixed with stainless steel screws, complete all as specified and directed. |
| 24 | Supply and fixing of 200 mm long, solid in one piece stainless steel 204 grade, barrel tower bolts of extruded section 10mm dia shoot complete all as specified and directed |
| 25 | Supply and fixing of 150 mm long, solid in one piece stainless steel 204 grade,barrel tower bolts of extruded section complete all as specified and directed. |
| 26 | Supply and fixing of 100 mm size solid in one piece stainless steelhandles, in 304 grade and fixed in stainless steel screws complete all as specified and directed |
| 27 | Supply and fixing of stainless steel sliding door bolts 204 grade, with bright bolt not less than 16mm dia with and incl a minimum of 6 bolts and nuts,and fixed 250mm long complete all as specified and directed. |
| 28 | Supply and fixing of floor door stopper of alluminium alloy body and tongue anodised, with hard drawn steel spring, fixed in floor, overall length of cover plate 140mm. complete all as specified and directed. |
| 29 | Supply and fixing in repair 300 mm mild steel, ordinary rat tail rod pattern spring welded to steel/fixed to wooden door frame including roller and roller plate complete all as specified and directed. |
| 30 | Material and labourfor preparation of old untreated wooden surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 31 | Material and labourfor preparation of new untreated wooden surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 32 | Dismantling of old aluminium anodised partition with frame, (fixed type) with aluminum glazing clip, snap beading and refixing the same in other locations complete all as specified and directed |
| 33 | Hacking out old broken glass (any thickness), size qualityor description from wooden frames glazed with putty or fixed with beads, complete all as specified and directed |
| 34 | Supply and fixing of 12mm thick toughened glass in any size or shape for in door, window etc.including hacking out all as specified and directed. |
| 35 | Supply and fixing in repairs600mm size solid in one piece stainless steel handles, all in 304 grade and fixed in glass doors as directed complete all as specified and directed |
| 36 | Supply and fixing in repairs pivot hinges for glass door/window complete all as specified and directed. |
| 37 | Supply and fixing of 5 mm thick sheet glass, ordinary quality and glazing with oil putty in squareexc 0.50sqm each pane, complete all as specified and directed |
| 38 | Supply and fixing of 4 mm thick transparent acrylic sheet,fixed with silicon sealent in square/rectangularin doors, windows etc complete all as specified and directed |
| 39 | Supply and fixing of glazing of 5.00 mm thick plain /frosted glass as in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket and aluminium snap beading etc. complete all as specified and directed. |
| 40 | Supply and fixing in repair of steel locking handle for window shutterswith screwsetc complete all as specified and directed. |
| 41 | Supply and fixing in repair of double action floor spring of approved brand and manufacture confirming Metreing to IS: 6315 hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and making good to floor to match with existing floor complete all as specified and directed. |
| 42 | Supply and fixing of welding in repair length exc 2.5 cm but n. exc 5 cm & metal to be welded n.exc 6 mm thick complete all as specified and directed. |
| 43 | Supply and fixingin repair of aluminium (extruded section) door closer hydraulically regulated, designation No.1 universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 Kilogram and fixed with stainless steel screw complete all as specified and directed. |
| 44 | Supply and fixing in repair of 20mm dia stainlesssteel 202 Gde drapery rod withincl brackets, decorative finials at both endscomplete all as specified and directed. |
| 45 | Supply, fixing, laying & testing 15 mm dia (Nominal bore) galvanised iron water tubing \"medium grade\" with and including all GI fittings such asunions, reducer sockets, socket reducing bends, elbows, tee, checknuts, caps, plugs etc. fixed complete to walls and ceilings or laid in floors including taking upor down old tubing complete all as specified and directed. |
| 46 | Supply, fixing, laying & testing 20 mm dia (Nominal bore) galvanised iron water tubing \"medium grade\" with and including all GI fittings such asunions, reducer sockets, socket reducing bends, elbows, tee, checknuts, caps, plugs etc. fixed complete to walls and ceilings or laid in floors including taking upor down old tubing complete all as specified and directed. |
| 47 | Material and labour for PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in benching to drain, holdfast, padding to roof/chhajja, coping, bed block etc. and the like edge slightly rounded or chamfered including necessary use and waste of foRunning Metre work and demolition of existing old cement concrete (un-reinforced) not exc 15 cm thick inground floor and paving below or above ground level complete all as specified and directed. |
| 48 | Material and labour for cement concrete 1:3:6 type C-2 (using 40mm graded aggregate) 75 mm thick as in plinth protection / path surface finished even and smooth without using extra cement including demolition existing PCC, complete all as specified and directed |
| 49 | Material and labour for PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in foundation filling, mass concrete, sub base or leveling course of floor etc. including demolition of existing old cement concrete (un-reinforced) not exc 15 cm thick inground floor and paving below or above ground level complete all as specified and directed. |
| 50 | Material and labour for prepolished chequered cement concrete coloured tiles 30cmx30cmx22-25mm thick, setjointed and pointed in neat cement slurry @ 3.00Kg/Sqm with grey cement and pigment over and including 15mm thick screed bedding layer (1:6) complete all as specified and including dismantling of old tiles complete all as specified and directed |
| 51 | Material and labour for non skidceramic coloured tiles (300x 300mm) x 7 to 8mm thick as in floor set and jointed in neat cement slurry @ 3.00Kg/Sqm and pointed in white or coloured cement to match the surface of tile over and including screed bed or bedding layers of mortar 15 mm thick for laying floor finishes in CM 1:6and including dismantling of old tiles complete all as specified and directed |
| 52 | Material and labour for glazed ceramic tiles coloured of size 450x 300 x 7 to 8mm, as on vertical surfaces such as skirting, dados etc set and jointed in neat cement slurry @ 3.00 Kg/Sqm and pointed in white cement to match over and including 15 mm thick rendering in CM 1:4 for receivingtiles as in backing and including dismantling of old tilescomplete all as specified and directed |
| 53 | Material and labour for non-skid / mat finish designed coloured joint free parkingceramic tiles of size not less than 400 mm x 400 mm x 8-9 mm thick in floor, set and jointed in neat cement slurry @ 3.00 Kg/Sqm and pointed in coloured cement to match over and including 15 mm thick screed in cement mortar 1:6 and including dismantling of old tiles complete all as specified and directed |
| 54 | Material and labourfor double chargevitrified ceramictiles light shade polished (square / rectangular)of 10mm thick, area of each tile n.exc 0.36 sqm as in floor etc. set and jointed in neat cement slurry @ 3.00 Kg/Sqm and pointed in white or coloured cement to match the surface of tile over and including screed bed or bedding layers of mortar 15 mm thick for laying floor finishes in CM 1:6 and including dismantling of old tiles complete all as specified and directed |
| 55 | Demolitionof stone slabs and tiles of any description or thickness in floors, aprons etc, complete all as specified and directed. |
| 56 | Material and labourfor 20 - 25 mm thick machine cut Kota stone slab as in flooring over and including 15 mm thick screed bed in CM 1:6, laid and jointed with grey cement slurry @ 3.00 Kg/Sqm mixed with pigment to match the shade of the slab including necessary grinding, rubbing, rounding to exposed edges and polishing in granite finish complete all as specified and directed. |
| 57 | Material and labour for sand filling under floors or in foundations including watering and consolidation complete all as specified and directed. |
| 58 | Material and labourfor 60 mm thick pre polished rubber moulded coloured machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658- 2006 M-35 Grade with grey cementwithpigment including demolition of old floor complete all as specified and directed |
| 59 | Material and labourfor Cutting/grinding and polishing of exterior kota sotne/ terrazzo flooring/granite, etc complete all as specified and directed. |
| 60 | Material and labour18-20 mm thick granite ( of any type) (table rubbed and polished ) in steps, jambs, pillars, window-cills, cooking plateform, and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed. |
| 61 | Material and labour for brick work with sub class ‘B’ bricks old size straight or curved on plan exc. 6 mtr mean radius built in CM(1:6) andincluding demolition of old brickwork complete all as specified and directed. |
| 62 | Material and labour for rendom rubble stone masonary work straight or curved on plan exc. 6 mtr mean radius built in CM(1:6) andincluding demolition of old stone/brickwork complete all as specified and directed. |
| 63 | Material and labour for brick work with sub class ’B’ bricks old size straight or curved on plan to any radius in half brick thick walls built in cement mortar (1:4) andincluding demolition of old brickwork complete all as specified and directed. |
| 64 | Material and labour for rendering 15mm thick in cement mortar 1:4 brick/concrete surfaces of wall, finished even and fair without using extra cement complete all as specified and directed. |
| 65 | Material and labour for rendering 15 mm thick cement plaster in CM 1:6 on brick & concrete surfaces and finished evenand smooth without using extra cement complete all as specified and directed. |
| 66 | Material and labour for raised pointing in CM 1:4 to random rubble masonry, uncoursed or brought upto courses complete all as specified and directed. |
| 67 | Taking down cement plaster of any description and in any position including raking out joints, hacking for key, scrubbing down with water etc of any thickness complete all as specified and directed. |
| 68 | Material and labour for preparation of new plastered wall surfaces and applying two coats of cement base paintover a coat of primer complete all as specified and directed. |
| 69 | Material and labourfortwo coats of oil bound distemperon newly plastered surfaces of wall over a coat of primer including preparation of surfaces complete all as specified and directed. |
| 70 | Material and labour for preparation of old plastered wall surfaces and applying one coat of cement base paintcomplete all as specified and directed. |
| 71 | Material and labourfortwo coats of oil bound distemperon old plastered surfaces of ceiling including preparation of surfaces complete all as specified and directed. |
| 72 | Material and labourfor preparation of wall and applyingwall care putty 1 to 1.5 mm thick to make the surface smooth as specified and directed |
| 73 | Supply and fixing of in repair galvanised mild steel wire cloth. 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples including wooden beading complete all as specified and as directed. |
| 74 | Supply and fixing of4 mm thick \"E\" board (classic)of size 600x600 mm false ceiling including & fixing of frame work made of special section MSsheetglavanised with zine coating , cellular nitro painting & consisting of angle cleats of size 25 mm wide, 1.60 mm thick with flange fixing to the ceiling with dash fastener 12.5 mmx40 mm long or with 4 mm dia GI wire or fixed with nails or bolts in GI channel 45x14x0.90 mm runner at 600 mm c/c including fixing of Eboard with ceiling section & perimeter of angle 25x25x0.50 mm thickincluding taking down the existing ceilling, complete all as specified and directed. |
| 75 | Supply and fixing ofhollow profilePVC Wall panneling consisting of 5mm thickPVC sheet inclusive of solventand fixing to walls on PVC frame including all fillets as per specifications and drawing including taking down the existing Wall penallingetc complete all as specified and directed. |
| 76 | Material and labour for cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc and cutting chases for concealed water tubing or concealed conduit wiring, etc and making good existing surface, cutting not exc 10 cm girth in brick walls etc complete all as specified and directed. |
| 77 | Supply and fixing of rotational moulded polyethylene(triple layer white) water storage tanks 500 Ltr capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including dismantling of old water tank and remove from site complete all as specified and directed. |
| 78 | Supply and fixing of rotational moulded polyethylene (triple layer white) water storage tanks 1000 Ltr capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including dismantling of old water tank and remove from site complete all as specified and directed. |
| 79 | Supply and fixing in repair PVC connection 15 mm dia 450 mm long with brass fly nut at both ends complete all as specified and directed. |
| 80 | Supply and fixing in repair vitreous china squatting pan “ORISSA PATERN” of size 580 mm x 440 mm, white, with integral foot rest (excluding flushing cistern and flush pipe) including single trap spun casted 60 cm long fix ineposy mortar connection to trap and to flushing pipe, anti syphonage pipe etc and making good to floor, complete all as specified and directed. |
| 81 | Supply and fixing in reapair 75 mmPVCfloor trap with grating including jointing to waste pipe fixed in cement concrete type B1 1:2:4 (using 20 mm graded stone aggregate) complete all as specified and directed |
| 82 | Supply and fixing in repair 10 litre capacity PVC low level flushing cistern ‘ white’ with inlet, float valve including bracket with 32 mm dia PVC pipe 600 mm long complete all as specified and directed. |
| 83 | Supply and fixing in repair Wash basin, vitreous China (Flat back) of size 550x400mm including fixing and pinning in ends of bracketsincluding brass waste coupling of requisite size and waste pipe complete all as specified and directed. |
| 84 | Supply and fixing in repair pillar taps, brass, with capston heads, fancytype chromium plated, screwed down high pressurewith long screwed shanks and flynuts screwed for 15mm bore iron pipe and fixed complete all as specified and directed. |
| 85 | Supply and fixing in repair 15mm bore Bib taps long body, cast copper alloy fancy type chromium plated with hand elbow operated handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed. |
| 86 | Supply and fixing in repair stainless steel grating100 mmdia, complete all as specified and directed. |
| 87 | Material and labour cleaning of water storage tank 500/1000 Ltr capacity mechanically using pressure pump with disinfectant chemical including cleaning & removing all scale & dirt etc from existing tanks, mouths of circulating pipes and outer surface of any description & washing down in themanner for the following capacitycomplete all as specified and directed. |
| 88 | Supply and fixing in repair 20 mm dia ball brass valve high pressure with polythene float and fly nut complete screwed for iron pipe or brass ferrule and fixed complete all as specified and directed. |
| 89 | Supply and fixing in repair vitreous China wash down (EWC) water closet pan(pedestal pattern), white (excluding flushing cistern and flush pipe) but including seat and cover white for pedestal pattern complete all as specfied and directed. |
| 90 | Supply and fixing in repair Vitreous china wash down water closet pan (pedestal pattern) (cascade) single piece, white including dual wash flushing cistern, Plastic water closet seat, white, closed pattern with flat bottom, and cover etc complete all as specified and directed. |
| 91 | Supply and fixing in repair vitreous china wash hand basin white, oval type counter top of size 550mmx400mm fixed on and including cast iron cantilever bracket, 32mm dia brass waste coupling and 32 mm dia PVC waste pipe, waste fitting etc. complete all as specified and directed. |
| 92 | Supply and fixing in repair half stall china urinals (wall type) complete including plugs, bedding urinal to plugs with and incl 60 mm long screws, pointing around urinal back in cementand waste pipe etc complete all as specified and directed. |
| 93 | Supply and fixing in repair of 32 mm dia waste fittings, brass chromium plated for Glazedware sink, WHB, etc with long screwed shanks and flynuts, flange embedded in red lead cement and other end fixed complete all as specified and directed. |
| 94 | Supply and fixing in repair bib taps long body, brass, fancy type, chromium plated with crutch or butterfly handles, screwed down, screwed for 15 mm bore complete all as specified and directed. |
| 95 | Supply and fixing in repair 15 mm dia CP brass centre hole basin mixer with accessories in wash basin for mixing hot and cold water, screwed down for 15 mm dia bore GI Pipe complete all as specified and directed. |
| 96 | Supply and fixing in repair 15 mm dia CP brass Wall mixer with provision of over head shower complete with 115 mm long bend pipe, connecting legs & wall flange complete all as specified and directed. |
| 97 | Supply and fixing in repair CP brass angle cock 15 mm bore complete all as specified and directed. |
| 98 | Supply and fixing in repair of plastic Water Closet seat,white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed. |
| 99 | Supply and fixing in repair PVC waste pipe flexible type 32 mm dia with coupler complete all as specified and directed . |
| 100 | Supply and fixing in repair PVC wastepipe for urinal flexible typewith 50 mm dia coupler complete all as specified and directed . |
| 101 | Supply and fixing in repair 75 mm bore UPVC (SWR) pipe 4 Kilogramf/cm2 single socketed in any length with rubber ring, fixed on wall complete all as specified. |
| 102 | Supply and fixing in repair 110 mm bore UPVC (SWR) pipe 4 Kilogramf/cm2 single socketed in any length with rubber ring, fixed on wall complete all as specified. |
| 103 | Supply and fixing in repair UPVC (SWR) bend, 75 mm bore\" complete all as specified and directed. |
| 104 | Supply and fixing in repair UPVC (SWR) junction single, (Single T) equal or unequal, 75 mm bore with oval access door complete all as specified and directed. |
| 105 | Supply and fixing in repair UPVC (SWR) bend, 110 mm bore\" complete all as specified and directed. |
| 106 | Supply and fixing in repair UPVC (SWR) junction single, (Single T) equal or unequal, 110 mm bore with oval access door complete all as specified and directed. |
| 107 | Supply and laying in repair of 20 mm dia CPVC pipes SDR 11 and plain CPVC SDR 11 fittings on walls /ceiling or laying in floors complete all as specified and directed. |
| 108 | Supply and laying in repair of 25 mm dia CPVC pipes SDR 11 and plain CPVC SDR 11 fittings on walls /ceiling or laying in floors complete all as specified and directed. |
| 109 | Supply and laying in repair of 32 mm dia CPVC pipes SDR 11 and plain CPVC SDR 11 fittings on walls /ceiling or laying in floors complete all as specified and directed. |
| 110 | Material and labour for cutting around the pipe 75/100mm bore waste pipe/soil pipe including taking out plant roots up to any depth in brick masonary and rejointing in pipe joint in eppoxy mortar (Asian/Berger) and making good to existing surface all as directed by Engr-in-charge. (After the jointing pipe one week to be open for checking of leaking including scaffolding) complete all as specified and directed. |
| 111 | Material and labour for stainless steel (Grade 304) railing/ corner gaurd made of hollow tubes,channels, plates, sheets etc., including welding, grinding,buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement including dismantling of oldu/s S/S items complete all as specified and directed |
| 112 | Supply and fixing in repair of solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers complete all as specified and directed. |
| 113 | Material and labour for one coat of oil bound distemper in any tint on wallsincluding preparation of old decorated surfaces of walls (plastered) by brooming down with corewire brushing, scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and finally clean with sand paper complete all as specified and directed. |
| 114 | Material and labour for two coats of oil bound distemper in any tint on wallsincluding preparation of old decorated surfaces of walls (plastered) by brooming down with corewire brushing, scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and finally clean with sand paper complete all as specified and directed. |
| 115 | Material and labour for preparation of old painted surfaces of wood & wood based material of any description over 10 cm width or girth and applying one coat of Synthetic enamel Paint complete all as specified and directed. |
| 116 | Material and labour for preparation of old steel surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as speciied and directed. |
| 117 | Supply and fixing in repair12 mm thick prelaminated particle board exerior grade in bottom panel, including rubber gasket, aluminium glazing clipscomplete all as specified and directed. |
| 118 | Supply and fixing in repair heavy duty thread type PVC water tank cover with fixing frame fixed on PVC tank with 4 Nos of screws for 500/1000 ilts tank complete all as specified and directed. |
| 119 | Supply and fixing in repair CP health faucet with 1.20 mtr metallic expandable tube & hook complete all as specified and directed. |
| 120 | Supply and fixing in repairs PVC (SWR) pipes class-I single socketed in any length with rubber ring joints fixed to wall bore pipe 160 mm including suitable sockets fixed with suitable clamp complete all as specified and directed. |
| 121 | Supply and fixing in repairs PVC (SWR) bend of dia 160 mm complete all as specified and directed. |
| 122 | Excavation in trenches, n exc 1.5 mtr wide and n exc 1.5 mtr in depth for foundation etc. or for shafts, wells, cesspits, manholes, pier holes etc. n exc 10 Sqm on plan and n exc 1.5 mtr in depth and getting out in any type of soil complete all as specified and directed. |
| 123 | Returning filling in soil including spreadingleveling watering and well ramming in layers not exc 25 Cm complete all as specified and directed. |
| 124 | Removing excavated material (Soils) n.exc 50 m and depositing where directed at a level n exc 1.5 mtr above the starting point complete all as specified and directed. |
| 125 | Supply and fixing in repair of mirror cabinet of size 446x505x125 mm, decorative type PVC frame, fixed with PVC rawal plug with CP brackets screw fixed, complete all as specified and directed. |
| 126 | NOTE:- Amount of credit ofRs. 87895.00 for retrieved materials is mentioned in Schedule of Credit Page No 28 & 29 of tender documents in pdf form which will be deducted offline while acceptance of tender. |
