Urgent Repair And Replacement Of Fittings And Fixtures Incl. Allied Electrical installation Work At Barasat Stadium, Barasat, North 24 Parganas.- 1 SUB-HEAD-1-- SUPPLY & FIXING OF LIGHT & FAN FITTINGSSupply & Fixing of Single LED Fitting (18 watt, 230 V AC, 50 Hz, 5700K CDL, THD< 10%, built in 2.5 KV SPD) with all accessories and 1 nos. LED Tube, as directed by EIC,Luminious efficacy > 105 & <120 Lumen/watt.The LED luminaves & accessories shall have BEE certification and fixing the same in existing fitting with necessary arrangments as per direction of E.I.C.[ NS ] [Make - PHILLIPS/ CROMPTON/Wipro ] 2 Supply and fixing of 240V, 36 Watt, Recessed Mounted (2 X 2)Square LED Light with glare free uniform illumination, CCT (5000-6500) and Luminious efficiency ≥ 105 lm/w or better, and fixing with each (2X2) 36 Watt, Square LED fittings (Recessed Mounted) incl. fixing on the false celling end by necy. arrangements with screw, nuts, fastener etc. as required as per the direction of E.I.C. [NS] [ Make : Philips/Crompton/Wipro] 3 Supply & Fixing of 9 W LED lamp [ min. Luminious efficiency ≥ 105 lm/w or better] (CG/Philips/Wipro) on existing batten holder [NS] 4 Supply & Fixing of 10W-12W LED Recessed Mounted down light fittings(False Ceiling Light Fittings)with glare free uniform illumination, CCT (5000-6500) and Luminious efficiency ≥ 105 lm/w or better incl. lamp and all other necessary accessories (Make-Philips / crompton/wipro). 5 Supply & Fixing of 5-6W LED Recessed Mounted down light fittings (False Ceiling Light Fittings)with glare free uniform illumination, CCT (5000-6500) and incl. lamp and all other necessary accessories. (Make-philips/crompton). 6 Supply & delivery of 230V, 50Hz, 400mm sweep heavy duty Metal body Wall Mount Bracket Fan (Cabin Fan) & with complete accessories. (Make-Crompton / EPC / Orient ) 7 Fixing only cabin fan on wall/ceiling by S&F rag bolts, nuts & washers (6 mm dia x 62 mm long) or as reqd. incl. S&F 24/0.20 PVC insulated flexible copper wire 0.5 mt. length [C-4/29] 8 SUB HEAD- 2--COMPOUND LIGHT Supply & Delivery ofFlood light luminaire (IP 66) with peanut lens and high poer LED to ensure uniform distribution and higher spacing between poles, 10 KV SPD, THD<10%, PF> 0.95, BIS approved silicon filled potted driver,CCT (5000-6500), minimum LPW : 110 lumen/watt and minimum system output 7700 lumen suitable for use with 230 Volt, 50 Hz.(Make-Crompton / Philips /Wipro) 9 Supply & Delivery ofFlood light luminaire (IP 66) with peanut lens and high poer LED to ensure uniform distribution and higher spacing between poles, 10 KV SPD, THD<10%, PF> 0.95, BIS approved silicon filled potted driver,CCT (5000-6500) minimum LPW : 110 lumen/watt and minimum system output 11000 lumen suitable for use with 230 Volt, 50 Hz. (Make-Crompton / Philips / Wipro) 10 Fixing only Floodlight Fitting with suitable tie clamps and MS plate for mounting on Pole/Tower/Base of concrete structure or similar structure. [C-3/ 20(a)] 11 Supply & Delivery of Street light luminaire (IP 66) with peanut lens and high poer LED to ensure uniform distribution and higher spacing between poles, 10 KV SPD, THD<10%, PF> 0.95, BIS approved silicon filled potted driver,CCT (5000-6500), minimum LPW : 110 lumen/watt and minimum system output 9900 lumen suitable for use with 230 Volt, 50 Hz. ( Make-Phillips /Crompton / Havells / Wipro) 12 Supply & Delivery of Street light luminaire (IP 66) with peanut lens and high poer LED to ensure uniform distribution and higher spacing between poles, 10 KV SPD, THD<10%, PF> 0.95, BIS approved silicon filled potted driver,CCT (5000-6500), minimum LPW : 110 lumen/watt and minimum system output 7700 lumen suitable for use with 230 Volt, 50 Hz. ( Make-Phillips / Crompton / Havells / Wipro) 13 Supply & Delivery of Street light luminaire (IP 66) with peanut lens and high poer LED to ensure uniform distribution and higher spacing between poles, 10 KV SPD, THD<10%, PF> 0.95, BIS approved silicon filled potted driver,CCT (5000-6500), minimum LPW : 110 lumen/watt and minimum system output 3850 lumen suitable for use with 230 Volt, 50 Hz. ( Make-Phillips / Crompton / Havells / Wipro) 14 Fixing only LED Street light type fittings incl. making holes/providing clamping arrangement & necy. GI reducer as required on the existing arm brackets of9 mtr. Height of pole Structure or 1.5mtr. Height existing arm bracket. [ NS ] 15 Fixing only outdoor / street light type fluorescent light fitting or MV light fitting complete with all accessories to be fixed /projected from the wall of the building incl. making holes/providing clamping arrangement & necy. GI reducer as required. S&F 40 mm GI pipe (ISI-Medium) quality 1.5 mts. average length having suitable bend S&F necy. length of 1.5 sqmm PVC insulated single core stranded annealed copper wire (Make approved by EIC) and making connections as required and mending good damages to wall incl. painting etc. [PWD Schedule 2017, Page no. C-03, Item no. 18] 16 SUB-HEAD- 3--POLYTHENE PIPE, WIRES AND RIGID CONDUITSupplying and Drawing 1.1 KV single core stranded FR PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) of the following sizes in the prelaid polythene pipe and by the prelaid GI fish wire and making necy. connection as required3 x 22/0.3 (1.5 sqmm) [E-9/1/a] 17 2 x 56/0.3 (4 sqmm)[E-9/1/g] 18 2 x 84/0.3 (6 sqmm) [E-9/1/j] 19 Finishing of the PVC insulated wire ends by socketting with pin/ring type copper sockets and insulated tapes etc., including supplying sockets, tapes. 20 4 sqmm [F-5/9/ii] 21 6 sqmm [F-5/9/iii] 22 Supplying and fixing PVC Rigid Conduit FR [Precision Make] on wall, ceiling with saddles and other accessories as required and mending good damages to building works20 mm size [E-16/7a] 23 SUB-HEAD 4--MISCELLANEOUSS&F Brass Neutral & Earth Bar in Existing 6 Way HTPN DB with necy. Connection after removing the existing one. [NS] 24 Supplying and Fixing GI water proof looping cable box having hinged GI Top Cover having 4 mm thick with rubber gasket lining, railway type mechanical locking arrangement, earthing terminal with lug etc. of the following sizes as indicated below,Comprising of one 250 V, 15 A Kit-Kat fuse unit, one NL on porcelain insulator etc. and housing the same on pole above 2mtr. from ground level by necessary pole clamping arrangement and dismantling the damaged looping cable box etc. where necy. incl. painting. 200 x 150 x 100mm [I-2/16(a)] 25 Supplying & fixing medium gauge GI Pipe ( ISI-Medium) Protection with necessary fittings and jointing metarials as required25 mm dia [F-6/11/a] 26 Taken down the existing fans from its original position and refixing the same after overhauling and repairing.[NS] 27 Re-winding the ceiling/wall mounted/exhaust fan with super enameled copper wire of appropriate gauge with minilex paper, mica sheet, cotton tape etc. and changing the loop wire including overhauling, baking, heat varnishing and testing and Fixing the same as per direction of E.I.C.230V, AC 9 Exhaust fan.[NS] 28 Supply & fixing of bush bearing (Make- As per direction of E.I.C) in place of unserviceable bearing [NS] 29 Supply & fixing of 2.5 mfd Oil-filled Condenser (Make- Tibcon) in place of burnt/defective one. [NS] 30 Taking down 240 V, 2000 W, 15 litter preinstalled geyser from its positionfor checking, cleaning and repairing of faulty parts and again fixing the same at the same place after complition of above mentioned job. [NS] 31 Supply and fixing of 2000 W Geyser Heating Coil (make- Venus) [NS] 32 Supply and fixing of 10 Thermostat Coil for geyser.( make-Venus) [NS] 33 SUB-HEAD 6--EARTHINGEarthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level as below:By ISI-Medium GI pipe (G1/2/a/ii) 34 Excavation of soil for installation of Earth Electrode and filling & ramming for Soft Soil.[1(b)/G-1] 35 Connecting the equipments to earth busbar including S & F GI (Hot Dip) wire of size as below on wall/floor with staples buried/cutting inside wall/floor as required and making connection to equipments with bolts, nuts, washers, cable lugs etc. as required and mending good damagesNo. 4 SWG [G-2/5a/i] 36 No. 8 SWG [G-2/5a/iii] 37 Supplying & fixing earth busbar of galvanized (Hot Dip) MS flat 25 mm x 6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with GI bolts, nuts, washers, spacing insulators etc. as required [PWD Schedule 2017, Page no. G-02, Item no. 4a] 38 Connecting the equipments body to earth electrode including S&F 20mm x 3mm galvanised (Hot Dip) MS flat on wall/floor with GI saddles as required and connection to equipments incl. drilling holes, with bolts, nuts, washers etc [G-3/5(c)] 39 Extra for providing masonery enclosure on the top of the earth electrode of overall size 86.36 cm x 86.36 cm x 46 cm deep (below ground level) complete with cemented brick work(1:6) of 25 cm width duly plastered with cement morter (inside) Cl hinged inspection cover of size 36.56 cm x 35.56 cm with locking arrangement, GI reducer including drilling of 46 nos. 12 mm dia holes on the GI pipe. [3(a)/G-2]
