Tender For Black Spot Work At The Intersection Falling Under Road Safety Work On Atheha To Jariyari Road (Odr) - Construction Of Embankment With Approved Material Obtained From Borrow Pits With All Lifts And Leads, Transporting To Site, Spreading, Grading, pratapgarh-Uttar Pradesh

Tender For Black Spot Work At The Intersection Falling Under Road Safety Work On Atheha To Jariyari Road (Odr) - Construction of embankment with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacting to meet requirement of table 300-2. as per MoRTH clause 3.16 & 305(including royalty etc complete) 2 Earthwork inexcavation of foundation of structures as per drawing and technical specification. Inlduing setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom, backfilling the excavation earth to the extent required and utilising the remaining earth locally for road work. 3 Providing and applying tack coat with bitumen VG-10 grade using pressure distributor at the rate of 0.25 kg per sqm on the prepared bituminous surfaces cleaned with mechanical broom. (For Speed table) For DBM & BC 4 Construction of granular sub-base by providing close graded material spreading in uniform layers with motor grader on prepared surface mixing by mix in place method with front end loader at omc and compacting with vibratory power roller to achieve the desired density, complete as per clause 401 5 Providing,laying, spreading and compacting graded stone aggregate to wet mix mcacdam specified including premixing the material with water at OMC in mechanical mix plant carriage of mixed material by tipper to site, laying in uniform layers with paver in sub-base/base course on well prepared surface and compacting with vibratory roller to achieve the desired density. Plant mix method 6 Providing and laying dence graded bituminous macadam withhigher capacity batch type HMP using crushed aggregates of specified grading premixed with bituminous binder@ 4.5% by weight of total mix and filler, transported to site, laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolled to achieve the desired compaction as per morth specification clause 507 complete in all respects. 7 Providing and laying bituminous concrete withhigher capacity hot mix plant using crushed aggregates of specified grading, premixed with bituminous binder @ 5.4per centof mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 507 complete in all respects 8 Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 mad of high intensity grade sheeting vide clause 801.3, fixed cover aluminium shting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x75 mm x6 mm firmly fixed to th ground by means of properly dsignd foundation with M-15 grade cment conc. 45 cm x 45 cm x 60 cm, 60 cm below ground lvel as per approved drawingSPEED LIMIT SIGN BOARD ON ABADI PORTION (Size- 60 cm circular) 9 Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 mad of high intensity grade sheeting vide clause 801.3, fixed cover aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x75 mm x6 mm firmly fixed to th ground by means of properly dsignd foundation with M-15 grade cment conc. 45 cm x 45 cm x 60 cm, 60 cm below ground lvel as per approved drawing STOP SIGN BOARD ON MINOR ROAD NEAR MAJOR ROAD A HEAD (Size-90cm hight Octagonal) 10 Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 mad of high intensity grade sheeting vide clause 801.3, fixed cover aluminium shiting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x75 mm x6 mm firmly fixed to th ground by means of properly dsignd foundation with M-15 grade cment conc. 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing (DOUBLE CHEVRON ) 11 Providing and fixing of retro-reflectorised cProviding and laying of hot applied thermoplastic compound 15 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes. (Repeted Bar) 12 Providing and laying of hot applied thermoplastic compund 2.5 mm thick including reflectrosing glass beads @ 250 gms per sqm area. Thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC: 35 the finished surface to be level. Uniform and free streks and holes and zebra crossing at Abadi, road junction, school etc. 13 Supply of Fixing of liner delinator system panel made of micro prismitics rectro reflective sheeted sheeting type XI duly laminated on thick aluminium fall to a unique corrugated shap to proided rectro reflection cross wide range of obseravations and external angles each LDS panel shuld be of nominal length of 33 inch shall be and each ridge shall be approximately 0.34 inch high Ench LDS Pannel finly fix and concrete . brick work with 16 Nos. Fastner /Screw. 14 Supply of Fixing of liner delinator system panel made of micro prismitics rectro reflective sheeted sheeting type XI duly laminated on thick aluminium fall to a unique corrugated shap to proided rectro reflection cross wide range of obseravations and external angles each LDS panel shuld be of nominal length of 33 inch shall be and each ridge shall be approximately 0.34 inch high Ench LDS Pannel finly fix and concrete . brick work with 16 Nos. Fastner /Screw.

INR 944 /-

INR 9 Lakhs /-