REPAIR/MANT OF JOINERY, PLASTERING, BRICK WORK ROOFING, PLUMBING, SANITARY, INTERNAL WIRING INCLUDING FITTINGS & FIXTURE AND CERTAIN B&R/E&M WORKS FOR TITHWAL, BARKI, CARIAPPA, CHUSHUL, KOHIMA AND JAYANTI COY AT AEC TRG COLLEGE & CENTRE PACHMARHI; 1 M&L Preparation of plastered old decorated wall surfaces and applying one coat of white washing complete all as specified and directed. 2 M&L Preparation of plastered old decorated wall surfaces and applying two coat of white washing complete all as specified and directed. 3 M&L Preparation of plastered old decorated ceiling surfaces and applying one coat of white washing complete all as specified and directed. 4 M&L Preparation of plastered old decorated ceiling surfaces including brooming down, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying two coat of white washing complete all as specified and directed. 5 M&L Preparation of plastered old decorated wall surfacesand applying one coat of distemper oil emulsion white or coloured complete all as specified and directed. 6 M&L Preparation of distempered or painted wall surfaceand applying two coat of distemper oil emulsion white or coloured complete all as specified and directed. 7 M&L Preparation of plastered old decorated wall surfaces and applying 1mm thick cement base puttyon plastered surfaces including preparation of surfaces and applyingtwo coats of distemper oil emulsion complete all as specified and directed complete all as specified and directed. 8 M&L Preparation of plastered old decorated wall surfaces including brooming down, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of colour wash complete all as specified and directed. 9 M&L Preparation of plastered old decorated wall surfaces including brooming down, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying two coat of colour wash complete all as specified and directed. 10 M&L for preparation of old cement basedsurfaces of walls and applying one coat of cement based paint complete all as specified and directed. 11 M&L for preparation of old cement basedsurfaces of walls and applying two coat of cement based paint complete all as specified and directed. 12 M&L Preparation of old surfaces wooden of any description not other described over 10 cm width or grith and applying one coat of synthetic enamel paint complete all as specified and directed. 13 M&L Preparation of old surfaces wooden of any description not other described over 10 cm width or grith and applying two coat of synthetic enamel paint complete all as specified and directed. 14 M&L for preparation of old painted steel surfaces of any description over 10 cm width and grith and applying one coat of synthetic enamel paint complete all as specified and directed. 15 M&L for preparation of old painted steel surfaces of any description over 10 cm width and grith and applying two coat of synthetic enamel paint complete all as specified and directed. 16 Taking down cement plaster on brick/ stone wall etc including racking out joints hacking for key, scrubbing down with water as described. 17 Material & labour for 10 mm thick rendering in CM 1:6on fair faces of brick work or concrete surfaces, surfacesfinished even and smooth without using extra cement complete all as specified and directed. 18 Material & labour for 10 mm thick rendering on other than fair faces of brick work or concrete surfaces,inCM(1:4)mixed with water proofing compoundsurface finished even and smooth without using extra cement complete all as specified and directed. 19 Supply only integral water proofing compound. 20 M&L Preparation of plastered new wall surfaces and applying 1mm thick cement base putty on plastered surfaces including preparation of surfaces and applyingtwo coats of distemper oil emulsion complete all as specified and directed complete all as specified and directed. 21 Material & labour Preparation of plastered new wall surfaces and applying 1mm thick cement base puttyon plastered surfaces including preparation of surfaces and applying two coats of cement base paintcomplete all as specified & directed. 22 Taking down chowkhats or frames with shutters ( without taking off shutters from the frames) of Area exc 1.5 sqm each complete all as specified and directed. 23 Taking down chowkhats or frames with shutters ( without taking off shutters from the frames) of Area exc 1.5 sqm but not exc 4 sqm each complete all as specified and directed. 24 Taking down shutters of any description, of Area not exc 1.0 sqm eachcomplete all as specified and directed. 25 Taking down shutters of any description, Area exc 1.0 sqm but not exc 2.0 sqm eachcomplete all as specified 26 S&F second class hard wood (Sal) plain, solid, straight chowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and as directed. 27 S&F Anodised Powder Coated aluminium door shutters,aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, ruber neoprene packing,handles 2 Nos in each door, hinges,anodised aluminum snap beading screws etc. complete all as specified. 28 S&F Powder coated aluminium(minimum thickness of powder coating 50 micron) work for doors,windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Zsections and other sections of approved make conforming to IS:733 and IS:1285, fixing with dash fasteners of required dia and size,including necessary filling up the gaps at junctions, i.e. at top,bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle,Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge. 29 S&F 35mm thick factory made plain framed, panelled door shutters (two panel) of IInd class hard wood rail and styles with lock rail and panel of 9 mm BWP commercial ply. The size of rail and style as per IS-1003 (Part-I), kiln seasoned and chemically pressure treated complete all as specified. 30 Supply and fix 30 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as spfd and directed 31 Supply & fix 30mm thick 2nd class Plain, framed,panelled shutters(any number of panels), with panels of timber flat on bothsides (featheredged),or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats complete all as specified and as directed. 32 S&F 35mm thick second class hard wood glazed and skeltron door shutter open rebated and prepared to receive glass or gauge etc divided into square with plain chamfered or rounded, mitred and rebated sash bars any number complete all as specified and as directed. Note :- Size of member of shutters as specified in SSR Part-I (2009) section 8 clause 8.20 (a). 33 S&F 30mm thick second class hard wood glazed and skeltron window shutter open rebated and prepared to receive glass or gauge etc divided into square with plain chamfered or rounded, mitred and rebated sash bars any number complete all as specified and as directed. Note :- Size of member of shutters as specified in SSR Part-I (2009) section 8 clause 8.20 (b). 34 S&F solid PVC door frame actory made of size 50mm x 47 mm made out of 5 mm plain colour PVC sheet, reinforced with M.S. Square tube, suppling & fixing in same opening complete as all as specified and directed. 35 S&F factory made solid panel PVC door shutter 30mm thick (Style) consisting of frame made out of MS tubes for top, bottom and side rails, MS frame shall be covered with heat molded plain colour PVC “C” channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail lock rail & bottom rail on either side and as gap insert for top rail and bottom rail paneling of plain colour PVC sheet to be fixed in the MS frame welded /sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement and fixing in the frame at site complete all as specified and directed. 36 S&F 100 mm long Extruded aluminium alloy handles fabricated type anodised of following size complete all as directed and specified. 37 S&F anodised aluminium sliding door bolt with hasp, staple ( bolt type ) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections of 250mm longsize complete all as specified and directed. 38 S&F 150 mm longanodised aluminium barrel tower bolts of extruded section of following size complete all as directed and specified. 39 S&F butt hinge100 mm long, medium weight, cold rolled and fixed of following size complete all as specified and directed. 40 Supply & fix as in repairs 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete (helical door spring) MS stove enameled balck all as specified and directed. 41 M & L repair to Pillar/Column (cross sectional area =15 square cm)by providing PCC(1:2:4) Type B-0 and finished with CM(1:3) after taking down of damaged portion of RCC work by using required formworkandproviding same finish as existing surface complete all as specified and directed. (Height of work to be considered upto 3.00m from FFL of Ground Floor.) (Note : Wherever reinforcement is required to be provided will be paid separately under relevant item and contractor have to inform the department one day in advance afterbinding of reinforcement for measurement otherwise no payment will be considered on this account). 42 Dismantling of Plain or corrugated steel sheeting,any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed. 43 S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified, sealed with integrated EPDM rebber washer for water tight fixing and side laps to be stiched using Alluminium pop rivets fixed on top of roof complete all as specified and directed. 44 M&L Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa asinridges,hips,valleygutter, drip fixed with self tapping screws (girth as fixed) complete all as specified & directed. 45 Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing etc., and making good, cutting exc 10 cm but not exc 20 cm girth all asspecified and directed. 46 Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. 47 S&F Framed work such as grills,gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed. 48 Dismantling timber scantling 40 sqcm and over in section, in any position complete all as specified and as directed. 49 S&F for MS framed works as intrusses, purline, rafters, column square/rectangular, round or angle section, fixed with and including iron cleats or other connected plates flate iron wind ties etc incl bending of MS section as requried omplete all as specified and as directed.Fe-410 gd 250 complete all as specified and as directed. 50 Dismantling wall and ceiling board or insulation boards/ slabs/ blankets, any thickness, including cover fillets complete all as specified and directed. 51 M&L for suspended false ceilling comprising of 6mm thick non asbestos fibre cement bulding boards fixed or laid/inserted to GI frame work with screws over Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/ intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre. Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified. 52 Demolition of unreinforcement cement Concrete of any description and in any position etc not otherwise specifically provided forcomplete all as specified and as directed. 53 M&L for 75 mm thick Cement concrete 1:4:8 type D2 (using 40mm graded stone aggregate) as in sub base to floors finished even complete all as specified and directed. 54 Material & labour for 40 mm thick PCC 1:2:4 type B-1 (using 20mm graded stone agg.) as in floors finished even and smooth using extra cement all as specified and directed. 55 M&L Concrete bed to drain pipes 150mm, including packing under, and haunching against the sides of pipes after they are laid and tested; in PCC(1:4:8) Type D-2. complete all as specified and directed. 56 M&L Slat-glazed stoneware drain pipes 150 mm dia laid in trenches and jointed complete all as specified and directed. 57 M&L PCC(1:3:6) type C1 as in benching to man hole complete all as specified and directed. 58 M&L for PCC (1:3:6) type C-1, using 40mm graded stone aggregate as in surface channel and drain including saucer drain and toe wall etc complete all as specified and directed. 59 Extra for forming fair finished drain or channel 30cm inner girth in cement concrete using extra cement including finishing the top of benching even and smooth using extra cementcomplete all as specified and directed. 60 Demolition of unreinforcement cement Concrete of any description and in any position etc not otherwise specifically provided forcomplete all as specified and as directed. 61 M&L for precast reinforced cement concrete (nominal mix) type B1 (1:2:4) using (20mm graded stone aggregate) in cover slab for manholes and setting in cement mortar 1:4 complete all as specified and directed. 62 Supply & fix mild steel TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and directed. 63 Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed. 64 M&L for 25 mm thick PCC (Cement concrete) 1:2:4 type B0 using 12.5 mm graded stone aggregate for floor finishes complete all as specified & directed. 65 M&L Light shade Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM 1:4 complete all as specified and directed. 66 M&L for joint free non skid ceramic white/light shade tiles 7 to 8 mm thick(in square/rectangular shape ) area of each tile exc 0.11 sqm and not exceeding 0.18 sqm in floors etc set & jointed in neat cement slurry and pointed white or coloured cement to match complete laid with and including over 15mm thick screed bed in CM (1:4) complete all as specified and as directed. 67 M&L white/light shade glazed ceramic tiles in vertical surface 300x 450x 6-7mm thick set and jointed in neat cement slurry and pointed in site or color cement to match including rendering 10mm thick in cement mortar 1:3 complete all as specified and as directed. 68 M&L for joint freeNon - skid white/light shade Ceramic tiles 7 to 8 mm thick (in square/rectangular shape )area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM 1:4 complete all as specified and directed. 69 Demolition of brickwork or stone boulder masonry, built in cement mortar or cement lime mortar including all quoins,arches, pillars,etc. but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed. 70 M&L for brick work with modular size full bricksubclass ‘B’ bricks, straight or curved on plan exc 6m mean radius, built in CM (1:6) complete all as specified and directed. 71 Material & labour Brickwork with sub- class ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls, built in, built in CM 1:4 complete all as specified and directed. 72 Dismantling water storage tank exc 500 ltr but n ecx 1000 ltr and removing to store complete all as specified and as directed. 73 Dismantling water storage tank exc 250 ltr but n ecx 500 ltr and removing to storecomplete all as specified and as directed. 74 M&L in repair of 500 ltr three layer rotational moulded polye-thylenewaterstoragetanks (cylindrical vertical withclosedtop)hoisted and fixed in position all asspecified in SSR Part I 75 M&L in repair of 1000 ltr three layer rotational moulded polye-thylenewaterstoragetanks (cylindrical verticalwithclosedtop)hoisted and fixed in position all asspecified in SSR Part I 76 S&F20 mmBall valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe and fixed. .(Minimum weight20mm-210 gms fixed in repairs. 77 S&F in repair 20mm dia Gun -metal,globe or gate valves,with iron wheel head ,screwed both ends for iron pipe and fixed complete all as specified and directed. . 78 Taking up or down 15mm bore steel water tubing (GI Pipe) and connections complete all as specified and as directed . 79 Taking up or down 20mm bore steel water tubing (GI Pipe) and connections complete all as specified and as directed. 80 S&F tubes 15mm bore medium grade galvansied with all fittings, fixed to walls and ceilings or laid in floors completeall as specified and directed. 81 S&F tubes 20mm bore medium grade galvansied with all fittings, fixed to walls and ceilings or laid in floors complete. 82 Hacking out old broken glass (any thickness, exc 1.5 sqm, quality or description) from wooden frames includingpunching or drilling out old glazing pins/spring clips complete all as specified and as directed. 83 S&F 3 mm thick sheet glass, ordinary quality and glazing with oil putty /wooden beads in square n. exc 0.5 sqm in each pane complete all as specified and as directed. 84 S&F in repair Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed. 85 Supply & fix in repair pillar tapscast copper alloy with capstan heads, chromium plated, screwed down, high pressure with or without lettered “hot” or “cold” with long screwed shanks and fly nut screwed for iron pipe of 15mm bore,complete all as specified & directed. 86 Supply & fixin repairbib taps cast copper alloychromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe of 15mm bore, complete all as specified & directed. 87 S&F in repair 15 mm bore bib tap of standard PTMT (min wt 90 gm), any colour, high pressure, screwed for iron pipe and fixed complete all as specified and directed . 88 S&F in repair 15 mm bore stop valve PTMT (min wt 90 gm), any colour, high pressure, screwed for iron pipe and fixed complete all as specified and directed . 89 Supply & fixin repair stop valve, 15 mm dia, cast copper alloy, chromium plated, screwed down, high pressure screwed both ends for iron pipes or for unions and fixed in pipe complete all as specified & directed. 90 S&F in repair 15mm bore Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixedcomplete all as specified and directed. 91 S&F in repair PVC valveless, symphonic action type low level flushing cistern white with inlet ball valve, float and handle including brackets, 10 ltr capacity complete with flush pipe(Long bend) 32mm dia of make as approvrd by GE complete all as specified & directed. 92 Supply & fix in PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified & directed. 93 S&F in repair Brass chromium plated shower rose 125mm size Complete all as specified and directed. 94 S&F as in repair Vitreous China wash basin, white, flat back, size 550 x 400 mm, including fixing acessories like galvanised brackets, etc complete all as specified and directed. 95 S&F as in repairvitreous china squatting pan of “Orissa” pattern of size 580 mmx 440mm white with integral foot rest (excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe, anti syphonage pipe etc and making good to floor complete all as specified and as directed. 96 S&F as in repair vitreous china wash downwater closet pan (pedestal pattern), white (flushing cistern and flush pipe) fixed with ‘P’ or ‘S’ trap, including making good the disturbed surfaces and to match with existing surface complete all as specified and directed. 97 S&F as in repair Cast iron P or S trap, ISI marked, suitable for 100 mm bore CI spun pipes complete all as specified. 98 S&F as in repair white plastic seat cover for W.C.(E.T.) white including M.S. CP or aluminium hinging device complete all as specified and directed. 99 S&F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified & directed. 100 Supply and fixing PVC waste pipes of 40/32mm bore suitable for wash hand basins/sinks/Urinal complete all as specified & directed. 101 Supply & fixing steel C.P. grating 100/125 mm dia as reqd at site complete all as directed by Engineer-in-Charge. 102 S&F for 125/110 mm bore PVC (SWR) gully trapsetting and jointing with solventcementcomplete all as specified & directed. 103 Supply and fixin repairPVC bends 110mm bore, any radius complete all as specified & directed. 104 S&F in repair PVC (SWR) bends any radius of 75mm bore , any radius complete all as specified & directed. 105 S&F in repairs PVC(SWR) junction single , (Single T), equal or unequalof 75mm bore complete all as specified & directed. 106 S&F in repair PVC (SWR), junction single, (Single T) equal or unequal 110 mm bore complete all as specified and directed. 107 S&Fin repair PVC (SWR) pipes 75 mm bore single socketed, in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed. 108 S&F in repairPVC (SWR) pipes 110 mm bore single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed. 109 S & F 100 mm bore stack clamps out of 50 mm x 5 mm flat iron and 16 mm dia round iron stays including bolts and nuts and securing ends of stays to wall or roof.complete all as specified & directed. 110 Supply & fix in repair 75mm dia outletPVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed. 111 S&F 600mmx450mm fancy type bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified & directed. 112 M & L for cutting of bushes small trees ( Peepal small plants etc) trunks shrubs of any dia and girth from roof projection, chajjas, wall junction parapet etc at any height by necessary demoliton of brick work etc if requried and making good distrubed surfaces to match with existing finihes with and incl material and labour in CM 1:4 mixed with WPC /PCC 1:3:6 type B0 (12.5 mm graded stone aggregate) / Brick work in CM 1:4 as required at site and complete all as specified and as directed. 113 M&L for taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking creditand makinggood the disturbed surfaces of walls, floors, etc.all as specified and directed at site. 114 M&L One light point controlled by one switch.for point re-wiring with 1100 volts grade PVC insulated FR-LSH multistranded copper conductor cable 1.5 sqmm (Phase - Red, Neutral - Black and earth continuity conductor 1.5 sqmm Green) drawn into and including PVC casing-caping not less than 32x12 mm ISI marked ivory colour with all fittings / fixing accessories and sunken galvanized pressed steel terminal boxes of thickness not less than 1.2 mm covered with 3 mm thick phenoliclaminated white sheet cover for mounting switches, sockets, fan regulators complete all as specified and directed. 115 As per iten No 114 but One fan point controlled by one switch. 116 As per iten No 114 but One socket outlet 6 amp controlled by one switch on the same board with other switches. 117 As per iten No 114 but One socket outlet 6 amp controlled by one switch on indepdendent board. 118 As per iten No 114 but One bell point controlled by one bell push. 119 As per iten No 114 but One light point controlled by two, two way switches. 120 M&L for point re-wiring with 1100 volts grade PVC insulated FR-LSH multistranded copper conductor cable 2.5 sqmm (Phase - Red, Neutral - Black) and earth continuity conductor 2.5 sqmm Green) drawn into and including PVC casing-caping not less than 25x12 mm ISI marked ivory colour with all conduit fittings / fixing accessories and sunken galvanized pressed steel terminal box of thickness not less than 1.2 mm covered with 3 mm thick phenolic laminated white sheet cover complete for one 16 amp socket outlet controlled by one switch on independent board complete all as specified and directed. 121 S&F Angle holder, insulated polycabonate body with back plate complete all as specified and directed. 122 S&F switch piano flush button single pole one way 6 ampcomplete all as specified and directed. . 123 S&F switch piano flush button single pole one way 16 amp complete all as specified and directed. . 124 S&F switch flush type, 6 amp, single pole, two way complete all as specified and directed. 125 S&F bell push, flush type, 6 amp 240 volts complete all as specified and directed. 126 S&F call bell, AC, 240 volts, single pole complete all as specified and directed. 127 S&F socket outlet2 in 1, 3 pin 6 & 16 amp flush type complete all as specified and directed. 128 S&F socket outlet 2 in 1, 2 & 3 pin, 6 amp, flush type complete all as specified and directed. 129 S&F ceiling rose 3 plates polycarbonate body complete all as specified and directed. 130 S&F hum freeelectronic step fan regulator 120 - 280 volts of 100 watt capacity (socket type) including connecting upcomplete all as specified and directed. 131 M&Lfor2x4 sqmm + 1x4 sqmm earth wire submain wiring alongwith earth continuity conductor with PVC insulated FR-SH multistranded copper conductor cable (Phase - Red, Neutral - Black, Earth - Green)drawing into into including PVC casing-caping not less than 25x12 mm ISI marked ofnominal sizes complete all as specified and directed. 132 As per item No 131 but 2x6 sqmm + 1x6 sqmm earth wire. 133 S&F LED Smart bright batten (1150mm) made of PC housing integrated LED driver with a PC glossy difusser duly prewired connection having a nominal system lumen output of 2000 lumens at a minimum system efficacy of 105 lumens per watt and total power consumption not less than 20 watt including driver. It has a rated system life time of 40000 burning hours at L70 and should have a color temperature of 6500K, CRI>80, THD < 10% and PF > 0.95complete. complete all as specified and directed. 134 S&F LED Smart bright batten (600mm) made of Aluminium housing integrated LED driver with a PC glossy difusser duly prewired connection having a nominal system lumen output of 2000 lumens at a minimum system efficacy of 105 lumens per watt and total power consumption not less than 9 watt including driver. It has a rated system life time of 40000 burning hours at L70 and should have a color temperature of 6500K, CRI>80, THD < 10% and PF > 0.95complete complete all as specified and directed. 135 S&F energy efficient recessed mounted LED luminaire 36 Watt suitable for 2x2 grid ceiling with flat diffuser and lumen output of 3300 lumens having constant current electronic driver duly connected with 0.5 sqmm white colour PVC insulated & sheathed three core flexible multi stranded copper conductor cable in renewal of any type luminaire as required. complete all as specified and directed. 136 S& F decorative wall mounting brushed nickel finish fixture with opal glass diffuser suitable with 2x9 Watt LED lamp base of B22 complete all as directed. 137 S&F in renewal 20 amp, single pole and neutral, socket outlet, with 2 pole and earth, metal enclosed plug top in power coated CRCA steel sheet enclosure recess mounted with chained cover for the socket outlet with and including one number single pole C series MCB 16/20 amp as required. 138 S&F SPN DB (Double Door), 240 volts, 4 ways MCB distribution board powder coated, CRCA steel sheet constructed as per IS : 8623, degree of protection IP 54 - IK 09 with metal door, recess mounted, having insulated 100 amp tinned copper bus bar, neutral busbar, earth bar, din bar, detachable gland plate, interconnection, earthing connection, blanking plates in unused spaces as required complete all as specified and directed. 139 As per item No 138 but SPN DB (Double Door), 240 volts, 8 ways.complete all as specified and directed. 140 As per item No 138 but TPN, (Double door) 415 volts, 4 ways . complete all as specified and directed. 141 S&F Single pole 6 to 32 amp MCBs ofC series having breaking capacity 10 KA, ISI marked including required wiring connections with copper lugs of suitable size provided in MCB DBs complete all as specified and directed. 142 As per item No 141 but for Doublepole 10 to 32 amp complete all as specified and directed. 143 As per item No 141 but for Four pole 40 to 100 amp complete all as specified and directed. 144 Taking down MCB distribution boards with incoming and outgoing controls any make, any capacity after disconnecting complete. 145 Taking down carefully aluminium or copper submain wiring with PVC casing caping / PVC surface conduit and making good disturbed surfaces complete.
