Replacement Of Sewage Pump Sets And Other Allied E/M Work At Azad Bhawan Sps In Jagpura Constituency Ac-41. , Supply Of Horizontal, Non Clog Sewage Pump, Solid Handing Pump Having Discharge 378 M3/Hr. Head 15 Mtr. 1475 Rpm. With Ci Impeller, 410 Shaft & Ss Sleeve, Ci Body, (For Set No. 1 & 4). Make Of Pump:-Kirloskar/M&P/Jyoti/Any Djb Approved Make , Supply Of Ms Pipe Of Size 150 Mm Dia Make- Tata/Jindal , Supply Of Ms Bend Of Size 150 Mm Dia. , Supply Of Ms Flange Of Size 150 Mm Dia.(12Mm Thickness) , Supply Of Cidf 150 Mm Sluice Valve, Non Rising Spindle. Make:- Kirloskar/Ivc , Supply Of Cidf Swing Type Non Return Valve Pn 1.0, Size150 Mmmake:- Kirloskar/Ivc , Supply Of Nut Bolt With Washer , Supply Of High Pressure Rubber Packing , Complete 16 No. Tyre Type Coupling , Supply And Fixing Of New Ms Base Frames As Per Pumps Motor Requirement Size 125X65x6mm Channel Approx. 80Kg Weight. , Making To Suitablesize M.S Clamp As Per Requirement Duly Fabricated Out Of 12.5 Mm Thickness X 100Mm Wide With Nut Bolts For Supporting Of Horizontal Suction Pipeand Other Supporting Required. , Fabrication/Fixing Of New Jailand Old Dismantling Of Ugr Stp New Jail With M.S. Beam Size 300Mm X 150Mm X 15 Mtr. Length X 12Mm Dai. (Approx Weight 380 Kg), M.S. Channel Size 100Mm X 50Mm X 12 Mtr Lenght X 6Mm Dia. (Approx Weight 440 Kg), M.S. Angel Size 50Mm X 50Mm X 50 Mtr. X 6Mm Dai (Approx Weight 220 Kg) And M.S. Square Bar Size 12Mm X 12Mm X 600 Mtr. Lenth (Approx Weight 450 Kg)Total Approx Weight 1500 Kg. , Fabrication/ Fixing Of Lifting Arrangement With The Help Of M.S. Beam Size 300Mm X 140Mm X 15 Mtr. Length (10Mm Thickness ) & M.S.C. Channel Of Size 150Mm X 75Mm X 16 Mtr. Length (10Mm Thickness ) And Ms Plate Of Size (300Mm X 300Mm X 25Mm Thickness ) With Proper Support As Per Site Requirement. With 2 Ton Gear Trolley And 2 Ton Chain Pulley Block X 9 Mtr Lift. , Removing Of Electric Connection, Dismantling Of Pumps, Motor, Valve, Tyre Coupling, Suction And Delivery Pipes Etc By Cutting Of Nut Bolt And Lifting The Same At Suitable Place And Re-Installation, Erecting, Testing, And Commissioning Of The Above Said Equipments/ Accessories With Necessary Required Items For Completion Of Work I.E. Flange, Msbend, Nrv, Sluice Valve , Pipe, Base Frame, Tyre Coupling Etc, Loading, Unloading, Cartage, Lifting The Same And Taking Out At Floor Level, Making Good All Damages Caused During Installation And Restoring The Same To Their Original Finish As Required, Adequate Safety Provision, Barricading, Warning Signal And Other Safety Measures While Executing The Work Or Wherever Necessary So As To Avoid Accident. The Components Of The Installation Shall Be Of Such Design So As To Satisfactory Function Under All Conditions.
