|
| 1 | CHAPTER - VII MISCELLANEOUS ITEMS Dewatering by pumpsincluding all leads, lifts and making all arrangements of disposal.where continuous flow of water from a source other than natural orground water is encountered in case of emergency maintenanceworks related to leakage. breakage and making wet connections.[Note ;- In case of any other situation demanding such emergencydewatering. use of this item is to be approved by the SuperintendingEngineer/Tender Accepting Authority. This item shall be executed onthe specific direction duly supported by proper clarification of theE.I.C. who will be satisfied in absolute discretion that such work hasnot been necessitated due to any natural source of water or any faultof the Contractor] |
| 2 | BUILDING WORKS (E) ROOFING, SHEET WALLING&WATERPROOF TREATMENT . A. ROOFING & SHEETWALLING14. Supplying, fitting & fixing Zn-Al alloy (55% Al & 45% Zn) coatingof 150 grams per sq. metre (followed by colour coated on both side)steel sheet work having minimum yield strength of 550 Mpa oftrapizoidal profile of approved make(excluding the supporting frame work) fitted and fixed with 55 mm &25 mm self tapping screw, EPDM Washer 16 mm dia & 3 mm th.washer etc. complete with 150 mm end lap and one corrugationminimum side lap. (Payment to be made on area of finished work). (i) In Roof:- a) With 0.5 mm thick sheet |
| 3 | SANTRAS. |
| 4 | CHEQUERED PLATE 10MM THICK MAKE : SAIL/TATA/JINDAL,B) ABOVE 4MM THICKNESS |
| 5 | BUILDING WORKS (F) STRUCTURAL STEEL WORKS, GRILLS,GATES ETC. A. ORIGINAL WORKS 3. Cutting to requisite length orshape departmental R.S. joists,channels, angles, tees, plates etc.(Payment to be made on area of cut surface) |
| 6 | BUILDING WORKS (F) STRUCTURAL STEEL WORKS, GRILLS,GATES ETC. B. REPAIRING 2. Welding in M.S. structural work withgas or electric: (b) Continuous weld. |
| 7 | BUILDING WORKS (F) STRUCTURAL STEEL WORKS, GRILLS,GATES ETC. B. REPAIRING 2. Welding in M.S. structural work withgas or electric: (a) Tack weld |
| 8 | SUPPLY & DELIVERY OF UNIVERSAL JOINT OF SHAFT DIA.25MM TO 35MM. |
| 9 | FITTING FIXING OF THE EXTENSION SHAFT WITH PROPERALINGMENT ON VALVE PLATFORM |
| 10 | (VI) STRUCTURAL STEEL (MS) ANGLES, JOIST, CHANNELS,FLATS ETC. (E 250 CONFORMS TO IS: 2062&808) (A) UPTO200MM SIZE. |
| 11 | CHAPTER - VIII SUPPLYING OF MATERIALS E. E. R. W. MSBLACK PIPE 8.15 Sypply of E.R.W.M.S. (Electrical Resistant WeldedM.S.) black pipe of ISI Mark as per relevent IS Specification ( heavyquality ) having wall thickness not less than 5 mm. [N.B.: The rates forsupply of TATA Make pipe will be arrived at by adding 20% of thecorresponding rates ] Diameter in mm (Internal) |
| 12 | CHAPTER - VII MISCELLANEOUS ITEMS Coating of \"Epoxy\" Resinof thickness not less than 160 micron with alowviscosity,crystallization-resistant epoxy resin base with a reactivediluents combined with high build epoxy amine adducts as per BS5493 standard and a polyamide or amido polyamine or any othersuitable hardener. It shall react with epoxy resin at normal ambienttemperature, suitable for solvent-free coatings as per recommendedproportion for use on metal,concrete and wood surface to protectfrom corrosion as well as damagefrom chemical reaction after makingthe surface free from dust, oil and moisture etc. all complete as perinstruction and to the satisfaction of ElC. [This item will be operatedon prior permission from the concerned SE/Dy Chief Engineer] |
| 13 | CHAPTER - VIII SUPPLYING OF MATERIALS E. E. R. W. MSBLACK PIPE 8.15 Sypply of E.R.W.M.S. (Electrical Resistant WeldedM.S.) black pipe of ISI Mark as per relevent IS Specification ( heavyquality ) having wall thickness not less than 5 mm. [N.B.: The rates forsupply of TATA Make pipe will be arrived at by adding 20% of thecorresponding rates ] Diameter in mm (Internal)100 |
| 14 | Sub Total |
| 15 | GST 18% |
| 16 | L.W.Cess @1% |
