Tender For Construction Of Steel Cage For Psa Plant Ahed Mch Block In Knh Shimla. (Sh - Eart Work, Cc Work, Welded Mesh Work Etc.)., Shimla-Himachal Pradesh

Construction Of Steel Cage For Psa Plant Ahed Mch Block In Knh Shimla. (Sh - Eart Work, Cc Work, Welded Mesh Work Etc.). Construction Of Steel Cage For Psa Plant Ahed Mch Block In Knh Shimla. (Sh - Eart Work, Cc Work, Welded Mesh Work Etc.). , Excavation Work By Mechanical Means (Hydraulic Excavator)/ Manual Means In Foundation Trenches Or Drains (Not Exceeding 1.5M In Width Or 10 Sqm On Plan), Including Dressing Of Sides And Ramming Of Bottoms, Lift Upto 1.5 M, Including Getting Out The Excavated Soil And Disposal Of Surplus Excavated Soils As Directed, Within A Lead Of 50 M. Ordinary Rock Including Carriage Of Materials Within All Leads And Lifts. , Providing And Laying In Position Cement Concrete Of Specified Grade Excluding The Cost Of Centering And Shuttering - All Work Up To Plinth Level 1:2:4 (1 Cement : 2 Coarse Sand) : 4 Graded Stone Aggregate 20Mm Nominal Size) Complete Within Carriage Of Material In All Leads And Lifts. , Steel Work Welded In Built Up Sections/ Framed Work, Including Cutting, Hoisting, Fixing In Position And Applying A Priming Coat Of Approved Steel Primer Using Structural Steel Etc. As Required In Gratings, Frames, Guard Bar, Ladder, Railings, Brackets, Gates And Similar Works Complete Including Carriage Of Materials Within All Leads And Lifts. , Providing And Fixing M.S. Welded Mesh 25Mm X 25Mm X 3Mm Thick As Per Approved Design Complete By Welding With Electrical Plant Complete Including Applying Priming Coat Of Red Lead Paint As Per Hp.Pwd. Specification 1990 Volume-1 And Including Carriage Of Materials Upto All Leads And Lifts By Mechanical Means And Manual Labour And As Directed By The Engineer In Charge , Providing And Fixing Precoated Galvanised Iron Profile Sheets (Size, Shape And Pitch Of Corrugation As Approved By Engineer-In-Charge) 0.50 Mm (+ 0.05 %) Total Coated Thickness With Zinc Coating 120 Grams Per Sqm As Per Is: 277, In 240 Mpa Steel Grade, 5-7 Microns Epoxy Primer On Both Side Of The Sheet And Polyester Top Coat 15-18 Microns. Sheet Should Have Protective Guard Film Of 25 Microns Minimum To Avoid Scratches During Transportation And Should Be Supplied In Single Length Upto 12 Metre Or As Desired By Engineer-In-Charge. The Sheet Shall Be Fixed Using Self Drilling /Self Tapping Screws Of Size (5.5X 55 Mm) With Epdm Seal, Complete Upto Any Pitch In Horizontal/ Vertical Or Curved Surfaces, Excluding The Cost Of Purlins, Rafters And Trusses And Including Cutting To Size And Shape Wherever Required. , Providing And Fixing Precoated Galvanised Steel Sheet Roofing Accessories 0.60 Mm (+ 0.05 %) Total Coated Thickness, Zinc Coating 120 Grams Per Sqm As Per Is: 277, In 240 Mpa Steel Grade, 5-7 Microns Epoxy Primer On Both Side Of The Sheet And Polyester Top Coat 1518 Microns Using Self Drilling/ Self Tapping Screws Complete : Ridges Plain (500 - 600Mm) , Providing And Fixing Precoated Galvanised Steel Sheet Roofing Accessories 0.50 Mm (+0.05 %) Total Coated Thickness, Zinc Coating 120 Grams Per Sqm As Per Is: 277, In 240 Mpa Steel Grade, 5-7 Microns Epoxy Primer On Both Side Of The Sheet And Polyester Top Coat 15-18 Microns Using Self Drilling/ Self Tapping Screws Complete Including Carriage Of Material In All Leads And Lifts.(I) Flashings/ Aprons.( Upto 600 Mm)

INR 350 /-

INR 4.97 Lakhs /-