Housing Urban and Rular Development Government Departments Closing in 0 days TDR #50157393

Construction Of School Building Ms Thasgam Sankoo Under Dp

Issued by Government Departments · sankoo, Jammu And Kashmir
Tender Value
2.57 Crore
Estimated cost
Bid Submission
30 Jul 2025
0 days left
EMD
5.14 Lakhs
Bank guarantee accepted
Document Fee
2571
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
sankoo → Jammu And Kashmir
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Construction of School Building MS Thasgam Sankoo Under DP

BOQ

Name of Work:-Construction of School Building MS Thasgam Sankoo Under DP
Sl. No. Item Description
1Earth work in excavation by mechanical means (Hydraulic excavator) in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.
2All kinds of soil @60%
3Soft Rock @30%
4Hard rock (BP) @10%
5Disposal of excavated earth by MT 3 km Avarge
6Disposal of excavated Rockby MT 3 km Avarge
7Layingof stone Patching excluding cost of stone (on horizontal) including carriage all complete job.
8Providing and laying in position cement concrete of specifiedgrade excludingthe cost ofcentering and shuttering – All work upto plinth level1:4:8( 1 cement: 4 coarse sand: 8 gradedstoneaggregate 20mm nominal size).
9Providing and laying in position specified grade of reinforced cement concrete,excluding the cost of centering, shuttering, finishing and reinforcement - All workup to plinth level :5.1.21:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3graded stone aggregate 20 mm nominal size derived from natural sources)
10Reinforced cement concrete work in walls (any thickness), including attachedpilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers,abutments, posts and struts etc. above plinth level up to floor five level,excluding cost of centering, shuttering, finishing and reinforcement :1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mmnominal size)
11Reinforced cement concrete work in beams, suspended floors, roofs havingslope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain windowsills, staircases and spiral stair cases above plinth level up to floor five level,excluding the cost of centering, shuttering, finishing and reinforcement, with1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mmnominal size).
12Reinforcement for RCC work including straightening, bending, and cutting, placing in position and binding all complete .Hot rolled deformed bars. (Thermo-Mechanically treated bars.)
13Providing and laying in position specified grade of cement concrete excluding the cost of centering and, shuttering , All work up to plinth level 1:3:6(1cement: 3coarse sand : 6 graded stone aggregate (40mm nominal size)
14Random Rubble masonry with and stone from qyarry in foundation and plinth including levelling up with cement concrete 1:6:12 (1 Cement: 6 coarse sand: 12 graded stone aggregate 20mm nominal size) upto plinth level with cement mortar 1:6 (1 Cement: 6 coarse sand) incld. carriage complete
15Centering and shuttering including strutting, propping etc. and removal of form for:
16Foundations, footings, bases of columns etc. for mass concrete.
17Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc
18Lintel, beams, plinth beams, girders, bressumers and cantilevers.
19Columns, pillars, piers, abutments, posts and struts
20Suspended floors, roofs, landings, balconies and access platforms.
21Edges of slabs and breaks in floors and walls Under 20 cm wide
22Providing & fixing upto floor five level precast cement concrete solid blocks including hoisting and setting in position with cement motor 1:3(cement: 3 course sand) cost of required centering shuttering and finishing smooth with 6mm thick cement plaster 1:3(1cement:3 finesand) on exposed surface complete 1:3:6(1cement:3 coarse sand :6 graded stone agg, 20mm nominal size
23Providing wood work in frames of doors, windows, clerestory windows and otherframes, wrought framed and fixed in position with hold fast lugs or with dashfasteners of required dia & length (hold fast lugs or dash fastener shall be paidfor separately).2nd Class Kail Wood
24Providing and fixing panelled or panelled and glazed shutters for doors, windowsand clerestory windows fixing with butt hinges of required size with necessaryscrews, excluding panelling which will be paid for separately, all complete as perdirection of Engineer-in-charge. (Note:- Butt hinges and necessary screws shall bepaid separately)Second class kail wood9.5.5.1 35 mm thick shutters
25Providing and fixing panelling or panelling and glazing in panelled or panelled andglazed shutters for doors, windows and clerestory windows (Area of opening forpanel inserts excluding portion inside grooves or rebates to be measured).Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick :9.7.2.2 Second class Kail wood
26Supplying and fixing in position glass pane 4mm thick incld. Cost of wooden beading complete.
27Structural steel work riveted, bolted or welded in built up sections, trusses andframed work, including cutting hoisting ,fixing in position all carriage complete.
28Providing and fixing precoated galvanized iron profile sheets (size, shapeand pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05 %) total coated thickness with zinc coating 120 grams per sqm as perIS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or asdesired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal,omplete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost ofpurlins, rafters and trusses and including cutting to size and shape wherever required.
2915mm thick Cement Plaster 1:4 mix(1cement: 4 Course Sand)
30Providing and applying white cement based putty of specified thickness,of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 2mm thick
31Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer
32Finishing walls with textured exterior paint of required shade :New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and includingpriming coat of exterior primer applied @ 2.20kg/10 sqm
33Applying priming coat:13.50.1With ready mixed pink or Grey primer of approved brand and manufacture onwood work (hard and soft wood)
34Painting with synthetic enamel paint of approved brand and manufacture ofrequired colour to give an even shade :13.62.1Two or more coats on new work over an under coat of suitable shade withordinary paint of approved brand and manufacture
35Supplying and fixing 12mm thick ply wood ceiling Incld. Budloo wood Joist (2.5\"x1.5\") Frame work Making Opening for window /ventelaator Priming and Painting complete.
36Providing wood work in frames of false ceiling, partitions etc. sawn and fixed inposition with necessary stainless steel screws etc.9.3.3 Budloo/Fir wood
37Supply and laying 100mm thickmud pushka roofing nammed earth mixed with bhusa over and incld. Polythene sheet for water proofing ,
38Supplying and fixing ore finished wooden wall panelling incld. Wooden joist base frame work of 1.5\"x2\"Buldoo woodand wooden cornice as required .
39Providing and fixing thermal insulation with specified wool and density conforming to IS: 8183, 50 mm thick, wrapped in 200G Virgin Polythene bags fixed to walls with screws, rawl plugs and washers and held in position by criss-crossing GI wire etc. complete as per directions of Engineer-in-charge.With resin bonded rock wool with density 48 kg/cum
40Providing and fixing Notipine ply 6mm thick with wooden Joist frame work of (1.5x2 Inch) Kadi wood joist)
41Providing and laying vitrified floor tiles in different sizes(thickness to be specified by the manufacturer) with waterabsorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thickcement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc.complete Size of tile 600x600 mm
42Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades exceptburgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarsesand) and jointing with grey cement slurry @ 3.3 kg per Sqm,including pointing in white cement mixed with pigment ofmatching shade complete
43Providing and fixing Doors windows fixture of approved Brand and quality
44L-Drop
45Handle For Door
46Handle For windows
47T-Bolt 150mm
48T-Bolt100mm
49Providing and fixing water closet squatting pan (Indian type W.C. pan ) with100mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cisternwith manually controlled device (handle lever) conforming to IS : 7231, with allfittings and fixtures complete including cutting and making good the walls andfloors wherever required :17.1.1White Vitreous china Orissa pattern W.C. pan of size 580x440mm with integraltype foot rests
50Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required :White Vitreous China Wash basin size 630x450 mm with a pairof 15 mm C.P. brass pillar taps.
51P/F PPR pipes complete with PPR fittings and clamps, including cutting and making good the walls , Tee Union , Elbow Bend ,Sockets etc. as directed by incharge engineer.
5225 mm with heat tressed wire insulation
5332 mm with heat tressed wire insulation
54Providing and fixing 4 layers Sentex including insulation with heat pipe complete job.
55Providing and Fixing PVC pipe 100 mm dia includingp-Trap, collor, elbow, tee etc. with insulation
56Providing and Fixing PVC pipe 75 mm dia includingF-Trap, collor, elbow, tee etc. with insulation
57Providing and fixing Bathroom items (Jagwar, Sera,) or equalent compony
58Wash basin mixture long
59Gyser 25 ltr
60C.P Bib cock
61Angle cock/ stop cock
62C.P Connection
63C.P Grating
64Providing and fixing Bathroom Mirror, Soap case, Towel road, Heinging, Toilet paper rod, corner glass shelf etc as per requirement and directed by incharge ingineer.
65Providing and laying machine cut, mirror polished Marble stone flooring, inrequired design (Simple geometrical, abstract etc.) and in patterns incombination with Italian marble stones of different colours, shades and finishedsurface texture etc., in linear portions of the building, all complete as per thearchitectural drawings, with 18 mm thick stone slab laid over 20 mm (average)thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed withwhite cement slurry @ 4.4 kg/sqm, including pointing with white cement slurryadmixed with pigment to match the marble shade, including rubbing, curing andpolishing etc. all complete as specified and as directed by the Engineer-in-Charge.18 mm thick Italian Marble stone slab, Perlato, Rosso verona, Fire Red or DarkEmperadore etc.
66Providing and laying Marble skirting for flooring incld.(average)thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed withwhite cement slurry @ 4.4 kg/sqm, including pointing with white cement slurryadmixed with pigment to match the marble shade, including rubbing, curing andpolishing etc. all complete as specified and as directed by the Engineer-in-Charge.18 mm thick Italian Marble stone slab, Perlato, Rosso verona, Fire Red or DarkEmperadore etc.
67Providing and fixing traditionally carved wood work (Shingstak) over doors andwindows including all accessories as per the direction of the Engineer in-charge,complete with;32.6.1 2nd class kail wood
68Supply and installation ofelectrical Underfloor heating mats for floor heating systemsnon-corrosive, flexible heating elements including cables, pre formed cable matsincluding smart thermostatand digital electrical control panel all complete (STIEBEL ELTRON / DANFOSSOr any other approved brand
69Providing and Fixing PVC Flase ceiling with Metal Frame workas per direction ofSite Engineer.
70Providing and Fixing modular almirah upto 9\" to 12\" deep including fixing of all fitting like hings, handles, L-drop, Magnitic,Fevecoletc all complete with requred 19mm ,12mm thick playwood, beading ,sumica etc as per direction of site ingineer.
71Providing and fixing Laboratory Tablewith Equipment storage , Laboratory sink , on the Top table 18mm Marble as per direction of site Engineer In Charage
72Provinding and fixing PVc conduit25mm diain slab incld. Tee, metal junction ,boxes ,bend etc complete
73Carriage of stone for an avg lead of 10Km by Mt
74Carriage of Sand /bajri by MT 20Km average

AI Tender Summary

OUR REF NO 50157393
AUTHORITY Government Departments
TENDER VALUE 2.57 Crore
LAST DATE 30-07-2025
Authority
Authority Name Public Works Department
Work Description Construction of School Building MS Thasgam Sankoo Under DP
Basic Detail
Tender No E-tender No13 of 2025-26 RnB Division Sankoo Dated12/07/2025
Bidding Type Tender
Location
City sankoo
State Jammu And Kashmir
Key Dates
Publish Date 14 Jul 2025
Submission Date 30 Jul 2025
Open Date 31 Jul 2025
Finance
Tender Value 2.57 Crore
Tender Fee 2571
EMD 5.14 Lakhs
Exemption Not Available
Document List
64534553-1972-490d-b3fb-52eecd58069f.html
BOQ_41280.xls
SBD13.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Jul 14, 2025
11:30 IST

Tender Published

Tender notice published.

Completed
Jul 30, 2025
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Completed
Jul 31, 2025

Bid Opening Date

Technical bids will be opened and evaluated.

Completed

Tender Documents

Download All (ZIP) ↓
html

64534553-1972-490d-b3fb-52eecd58069f.html

xls

BOQ_41280.xls

pdf

SBD13.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender

TenderDetail
Loading tenders