Tender For Construction Of Government Degree College,Mattan
Tender Value
12.79 Crore
Estimated cost
Bid Submission
09 Aug 2025
0 days left
EMD
25.59 Lakhs
Bank guarantee accepted
Document Fee
11000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
pahalgam → Jammu And Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Construction Of Government Degree College,Mattan
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 25-Jul-2025 | corrigendum T | Technical Bid | 05-Aug-2025 |
| 2 | 06-Aug-2025 | corrigendum to Technical bid | Technical Bid | 09-Aug-2025 |
| 3 | 04-Aug-2025 | Extension 1st | Date | 09-Aug-2025 |
BOQ
| Sl. No. | Item Description |
| 1 | CIVIL PART |
| 2 | Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres:All kinds of Soils |
| 3 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m. |
| 4 | Providing,Laying, spreading and compacting stone soling of specified sizesin uniform thickness, hand picking, rollingwatering and compactingIncluding all carriagesat an average lead of 10 kms and lifts upto the site of work complete job |
| 5 | Providing and laying in position specified grade of cement concrete excluding the cost of centering and, shuttering , All work up to plinth level 1:4:8 (1cement: 4 coarse sand : 8 graded stone aggregate (40mm nominal size) |
| 6 | Supply and filling of RBMconforming to specifications, carriage of material by tippers to work site, for all leads & lifts, spreading in uniform layers of specified thickness not exceeding more than 200mm and compacting to achieve the desired density, complete as per specifications and directions of Engineer-in-Charge. |
| 7 | Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand :6 graded stone aggregate 20 mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth and curing complete |
| 8 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and Reinforcement. All works upto plinth level 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 9 | Providing and laying in position machine batched and machine mixed design mix M-25 grade cementconcrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-incharge. Note: - Cement in this item is @ 330 kg/ cum. Excess or less cement used as per design mix is content considered payable or recoverable separately.All works upto plinth level |
| 10 | Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-incharge. Note: - Cement in this item is @ 330 kg/ cum. Excess or less cement used as per design mix is content considered payable or recoverable separately.All works above plinth level |
| 11 | Centering and shuttering including strutting, propping etc. and removal of form work for:Foundations, footings, bases of columns etc. for mass concrete |
| 12 | Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc |
| 13 | Suspended floors, roofs, landings, balconies and access platforms |
| 14 | Edges of slabs and breaks in floors and walls Under 20 cm wide |
| 15 | Lintel, beams, plinth beams, girders, bressumers and cantilevers. |
| 16 | Columns, pillars, piers, abutments, posts and struts |
| 17 | Stairs (excluding landings) except spiral staircases |
| 18 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete |
| 19 | Providing and Fixing factory made UPVC door/window frame, made of UPVC extruded sections , of size 65 mm x 55 mm with wall thickness 2.0 mm ( ± 0.2 mm) , corners of the door frame to be mitred cut and jointed with plastic brackets and stainless steel screws, reinforcing hinge side vertical of the frames with PVC profile of Size 28 mm x 30 mm having wall thickness 2 mm (±0.2 mm), including providing & fixing 3 nos of 125 mm long stainless steel hinges to the frame, fixing the frame with jamb with required number & size of anchor dash fasteners, all complete as per manufacturer’s specification and direction of Engineer-in-charge. |
| 20 | 35 mm thick factory made Solid panel PVC Door shutter, made out of single piece extruded solid PVC profiles, 5 mm (± 0.2 mm) thick, having styles & rails (except lock rail) of size 95 mm x 35 mm x 5 mm, out of which 75 mm shall be flat and 20 mm shall be tapered (on both side), having one side thickness of 15 mm integrally extruded on the hinge side of the profile for better screw holding power, including reinforcing with MS tube of size 40 mm X 20 mm x 1 mm, joints of styles & rails to be mitered cut & joint with the help of PVC solvent cement, self driven self tapping screws & M.S. rectangular pipes bracket of size 190 mm X 100 mm of cross section size 35 mm x 17 mm x 1 mm at each corner. Single piece extruded 5 mm thick solid PVC Lock rail of size 115 x 35x 35 mm, out of which 95 mm to be flat and 20 mm to be tapered at both ends, having 15 mm solid core in middle of rail section integrally extruded, fixing the styles & rails with the help of solvent and self driven self tapping screws of 125 mm x 11 mm, including providing 5 mm Single piece solid PVC extruded sheet inserted in the door as panel, all complete as per manufacturer’s specification and direction of Engineer-in-charge. Decorative finish (wood grained finish) |
| 21 | Providing and fixing factory made uPVC white colour casement/casement cum fixed glazed windows comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, stainless steel (SS 304 grade) friction hinges, zinc alloy (white powder coated) casement handles, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware\"s and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealant shall be paid separately) Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerancein dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.Casement cum fixed panel window having both end single casement panel, middle fixed panels and at top completely fixed ventilator with S.S friction hinges (350 x 19 x 1.9) made of (big series) frame 67 x 60 mm , sash 67 x 80 mm &mullion 67 x 80 mm all having wall thickness of 2.3 ± 0.2 mm and single glazing bead/double glazing bead of appropriate dimension. |
| 22 | Providing and fixing factory made uPVC white colour fixed glazed windows/ventilators comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads ofappropriate dimension, EPDM gasket, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware\"s and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealant shall be paid separately).Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.Fixed window / ventilator made of (small series) frame 47 x 50 mm & mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. |
| 23 | Kota stone slab flooring 25 mm thick over 20mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing, polishing and curing complete with base of cement mortar 1:4 (1 cement : 4 coarse sand) : |
| 24 | Kota stone slab 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm ( average) thick cement mortar 1:3 (1 cement:3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing, polishing and curing complete. |
| 25 | Extra for pre finished nosing in treads of steps of kota stone/ sand stone slab. |
| 26 | Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete.25mm thick with 12.5 mm nominal size stone aggregate |
| 27 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete Size of tile 600x600 mm |
| 28 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 29 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in : Cement mortar 1:6 ( 1 cement : 6 coarse sand) |
| 30 | Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level |
| 31 | Half brick masonry with common burnt clay (non-modular) bricks of class designation Cement mortar 1:4 ( 1 cement : 4 coarse sand) |
| 32 | Extra for half Brick masonry in superstructure above plinth level upto floor V level. |
| 33 | 12mm Cement plaster on the rough side of single or half brick wall of mix:1 : 6 ( 1 cement : 6 coarse sand) |
| 34 | 6 mm cement plaster to ceiling of mix 1 : 3 (1 cement : 3 fine sand) |
| 35 | Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat ofapproved steel primer all complete. |
| 36 | Providing corrugated G. S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.0.50 mm thick with zinc coating not less than 275 gram/m2 |
| 37 | Providing ridges or hips of width 60cm overall width plain G.S. sheets fixed with polymer coated J. or L hooks, bolts and nuts 8mm dia G.I. limpet and bitumen washers complete |
| 38 | Providing valleys of 90cm wide overall in plain G.S. sheets fixed with polymer coated J. or L. hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete.1.00 mm thick with zinc coating not less than 275 gram/m2 |
| 39 | Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete1 mm thick |
| 40 | Finishing walls with water proofing cement paint of required shade on New work (two or more coats applied @ 3.84 kg/10sqm) |
| 41 | Finishing walls with acrylic smooth exterior paint of required shade on New work (Two or more coats applied @ 1.67 liter/10sqm over and including priming coat of exterior primer applied @ 2.20kg/10sqm) |
| 42 | Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface. |
| 43 | Distempering with 1st quality acrylic distemper, having VOC (Volatile Organic Compound) content less than 50 grams/ liter, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. |
| 44 | Providing & laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C., kitchen & the like consisting of: (i) Ist course of applying cement slurry @ 4.4 kg/sqm mixed with water proofing compound conforming to IS 2645 in recommended proportions including rounding off junction of vertical and horizontal surface. (ii) IInd course of 20 mm cement plaster 1:3 (1 cement: 3 coarse sand) mixed with water proofing compound in recommended proportion including rounding off junction of vertical and horizontal surface.(iii) IIIrd course of applying blown or residual bitumen applied hot at 1.7 kg. Per sqm of area.(iv) IVth course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheet should be 100 mm wide and pasted to each other with bitumen @ 1.7 kg/sqm). |
| 45 | Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer.M.S. tube complete job as per directions of engineer incharge |
| 46 | MECHNICAL CARRAIGECEMNET 1OKM |
| 47 | SAND10KM |
| 48 | AGGREGATES 40MM AND ABOVE10KM |
| 49 | AGGREGATESBELOW 40MM 20KM |
| 50 | BRICKS10KM |
| 51 | SANITARY COMPONENT |
| 52 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 liter low level white P.V.C. flushing cistern, including flush pipe with manually controlled device (handle lever), conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:W.C. pan with ISI marked white solid plastic seat and lid. |
| 53 | Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I. clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required: One urinal basin with 5 literwhite P.V.C automatic flushing cistern. |
| 54 | Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required :White Vitreous China Wash basin size 630x450 mm with a pairof 15 mm C.P. brass pillar taps. |
| 55 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. |
| 56 | Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour:600 mm long towel rail with total length of 645 mm, 78 mm wide and effective height of 88 mm, weighing not less than 190 gms. |
| 57 | Providing and fixing toilet paper holderC.P. brass |
| 58 | Providing and fixing health faucet with concealed fitting arrangement of approved quality and make. |
| 59 | Providing & Fixing CP brass Short body bib cock including, necessary flange, cutting and making good he walls / floors wherever required complete. |
| 60 | Providing & Fixing CP brass long body bib cock including, necessary flange, cutting and making good he walls / floors wherever required complete. |
| 61 | Providing & Fixing CP brass coat hooks (double) of approved make. Including providing & fixing C.P brass screws, washers, rawal plug etc. |
| 62 | Providing and fixing 15 mm nominal bore of standard back type C.P. brass close hole basin mixer pillar tap of approved quality and make, weighing not less than 1.970 kg. |
| 63 | Providing and fixing CP Brass Single lever telephonic wall mixer of quality & make as approved by Engineer in charge.(a) 15 mm nominal dia |
| 64 | Providing & Fixing Wall Mounted C.P. Brass Sink Mixer single hole tap with swinging costed spout of required size including cuttinig and making good the wall wherever required. |
| 65 | Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931 |
| 66 | Providing and fixing PTMT soap dish holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements,weighing not less than 106gms. |
| 67 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank |
| 68 | Providing and fixing PTMT grating of approved quality and colour150 mm nominal size square 100 mm diameter of the inner hinged round grating. |
| 69 | Providing and fixing Floor Traps including all fittings required complete job 100m dia |
| 70 | Providing and fixing Floor Traps including all fittings required complete job 75 mm dia |
| 71 | Providing, Fixing, Testing & Commissioning uPVC SWR pipes (Type-B) for soil, waste,and vent conforming to IS 13592 along with all required fittings liketees, bends, cowls, crosses with or without access doors jointed with approved solvent cement fixed to walls and ceilings including angle supports with clamps complete including cutting holes in R.C.C/brick work (slab/beam/wall)and making good the floors, beams and walls with cement mortar where required complete of outer diameter.(Soil/ Waste pipe)50 mm dia. |
| 72 | 75 mm dia. |
| 73 | 110 mm dia. |
| 74 | 160 mm dia. |
| 75 | Providing and laying cement concrete 1:2:4mix (1 cement :2 coarse sand :4 graded stone aggregate, 20 mm down gauge) 75 mm in bed and all around CI/SWR soil & waste pipes under floor, including shuttering etc. complete as required in all respects.110 mm dia |
| 76 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer)pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge.Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc.PN-16 pipe , 16mm OD(SDR-7.4) |
| 77 | PN-16 pipe , 20mm OD(SDR-7.4) |
| 78 | PN-16 pipe , 25mm OD(SDR-7.4) |
| 79 | PN-16 pipe , 32mm OD(SDR-7.4) |
| 80 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer)pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge. External work including trenching, refilling etc.PN-16 pipe, 40mm OD (SDR-7.4) |
| 81 | PN-10 pipe , 50mm OD (SDR-11) |
| 82 | PN-10 pipe , 63mm OD (SDR-11) |
| 83 | Providing, fixing, testing & commissioning of forged brass nickle plated lever operated ball valve of full bore with forged brass hard chrome plated ball with min. working pressure of 10 Kg/cm2 Hydraulic test pressure at seat & shell shall be 16 Kg/cm2 . Lever should be anti rust coating, complete in all respects (For Domestic CWS/FWS Application).15 mm dia |
| 84 | 25 mm dia |
| 85 | 32 mm dia |
| 86 | 40 mm dia |
| 87 | 50MM dia |
| 88 | Providing and fixing PPR UnionsPPR Union 25mm |
| 89 | PPR Union 32mm |
| 90 | PPR Union 40mm |
| 91 | PPR Union 50mm |
| 92 | PPR Union 63mm |
| 93 | Providing and fixing 8mm dia jet with flexible tube upto 1 m long |
| 94 | Supply installation testing and commissioning of 2 HP water pump for lifting of water |
| 95 | Supply installation testing and commissioning of water heaters (Gysers) 50 litre capacity ISI marked |
| 96 | Providing and fixing kitchen sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P. brass waste complete, including painting the fittings and brackets, cutting and making good the walls wherever required.White glazed fire clay kitchen sink of size 600x450x250 mm |
| 97 | P/F PVC reducer 100-40mm dia |
| 98 | Construction of brick masonry inspection Chamber (600x600)mm inside depth upto 600mm in brick work in cement mortar 1:4 mix RCC top slab with 1:2:4 mix foundation concrete in 1:4:8 mix, inside plastering 12mm thick in cement mortar 1:3 mix with flitting coat of neat cement and marking channels complete including cost of manhole frame and Cover of required size of standard quality and carriage of all materials involved complete |
| 99 | Construction of brick masonry inspection Chamber (300x300)mm inside depth upto 600mm in brick work in cement mortar 1:4 mix RCC top slab with 1:2:4 mix foundation concrete in 1:4:8 mix, inside plastering 12mm thick in cement mortar 1:3 mix with flitting coat of neat cement and marking channels complete including cost of manhole frame and Cover of required size of standard quality and carriage of all materials involved complete |
| 100 | Providing and fixing in position polyethylene septic tank type-B (Comfort or equivalent ) having capacity for 50 users, 55\"x59\"x157\" inches in size, including excavation of put as per the size, providing and laying of 150mm thick bed concrete in 1:4:8 mix (1: cement:4 course Sand :8 graded stone agg 20mm nominal size) filling the septic tank with fresh water, connecting the inlet and outlet with the septic tank and filling the dry course of sand and bajre around the septic tank complete Job including carriage of all materials involved |
| 101 | DEMOLITION COMPONENT |
| 102 | Demolishing stone rubble masonry manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge: |
| 103 | Removing mortar from and cleaning stones and concrete articles (net quantity of stacks of cleaned materials will be measured) |
| 104 | Demolishing brick work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge: |
| 105 | Removing mortar from bricks and cleaning bricks including stacking within a lead of 50 m. (stacks of cleaned bricks shall be measured) :From brick work in mud mortar |
| 106 | Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 meters lead :Of area of 3 sqm. and below |
| 107 | Dismantling wood work in frames, trusses, purlins and rafters upto 10 meters span and 5 meters height including stacking the material within 50 meters lead : |
| 108 | Dismantling roofing including ridges, hips valleys and gutters etc., and stacking the material within 50 meters lead of : G.S. Sheet |
| 109 | Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-incharge 1:4:8 or leaner mix (i/c equivalent design mix) |
| 110 | Demolishing R.C.C. work manually/by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge. |
| 111 | Dismantling steel work in single sections including dismembering and stacking within 50 meters lead in :Channels, angles, tees and flats |
| 112 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 meters lead.For thickness of tiles 10 mm to 25 mm |
| 113 | Dismantling of flushing cistern of all types(C.I/PVC/Vitreous china) including stacking of useful materials near the site and disposal of unserviceable materials within 50 meters lead |
| 114 | ELECTRIC COMPONENT |
| 115 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 2X 1.5 sq.mm FRLS PVC insulated copper conductor ( Havells/Polycab/ Fenolex/ Anchor/equivalent as directed by engineer incharge.) single core cable in surface / recessed medium class PVC conduit, with modular switch ( Anchor roma plus/Legrand Mylinc /SSK NV/schneider Zencelo /Crabtree athena make.), modular plate, suitable GI box and earthing the point with 1x1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required, including the cost of conduit. Sample to be approved by EICGroup A |
| 116 | Group B |
| 117 | Wiring for light/(16A) power plugwith 2X4 sq. mm + 1X 4 sq. mm earth wire , FRLS PVC insulated copper conductor (Havell/Polycab/ Fenolex/Anchor/ equivalent as directed by engineer incharge.) single core cable in surface/recessedmedium class PVC conduit.including the cost of conduit. |
| 118 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 15/16 A shutter typemodular socket outlet and 15/16 A modular switch,modular plate, suitable GI box , connections etc. as required. Modular Switch & Socket:- ( Anchor roma plus/Legrand Mylinc /SSK NV/schneider Zencelo /Crabtree athena make.)Sample to be approved by EIC |
| 119 | Wiring for lighting circuits/ inverter circuits/AC Points/ 6- 10 amp power plug with 2X2.5 sq. mm FRLS PVC insulated copper conductor (Havell/Polycab/ Fenolex/Anchor/ equivalent as directed by engineer incharge.) single core cable in surface/recessedmedium class PVC conduit,alongwith 1 No. 2.5 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required, including the cost of conduit. |
| 120 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 2 nos. 3/5 pin 5-10 A modular socket outlet and 2 nos. 5-10 A modular switch, connections etc. as required.(Anchor roma plus/Legrand Mylinc /SSK NV/schneider Zencelo /Crabtree athena make.)Sample to be approved by EIC |
| 121 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required.(Anchor roma plus/Legrand Mylinc /SSK NV/schneider Zencelo /Crabtree athena make.)Sample to be approved by EIC |
| 122 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor (Havell/Polycab/ Fenolex/ Anchor make.), single core cable in surface/ recessedmedium class PVC conduit as required, including the cost of conduit.(a) 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire |
| 123 | ( d )4 X 10 sq. mm + 2 X 6 sq. mm earth wire ( Lighting submain) |
| 124 | (e) 4 X 16 sq. mm + 2 X 6 sq. mm earth wire ( Heating Submain) |
| 125 | Supply installation testing and commissioning of18 W +LEDSurface/recess, square or round Mountedlightluminaryfitting shape with minimum system lumen efficacy of 100 lm/W with Pressure Die cast Aluminium Heat Sink and P.F.>0.95 ,THD<10% ,CCT 5700K, CRI 80.The LED with Useful life of 50000 Hrs at L70, seperate driver, heat sink, earthing provision.. The Input voltage range shall be 150V to 270V .The Fixture should have In-built Surge Protection of 2kV. Certification:- LM79 & LM80 test report should be from govt approved In-house NABL lab/ government of India. The job includes AMC (reckoned from date of successful commissioning)of lighting fixtures for a period of Two years ,which includes replacement offixtures ofPhilips/ Havel\"s /Wipro make / sample to be approved before installation.. |
| 126 | S/F testing and comm. of MCB/MCCB C Curve ISI Marked of the below mentioned capacities in sub main controls (legrand/Havells/Schinider/ L&T/ABB/Simens) or equivalent make as directed by engineer inchargea) 6-32 A SP MCB (10KA) |
| 127 | b) 40-63A DP MCB |
| 128 | c) 40ATPN MCB |
| 129 | d) 63ATPN MCB |
| 130 | Supply InstallationTesting andComm. Of 250 mmsweep exhaust fan Shutter type of havells /Bajaj/Crompton/equivalent make as directed by engineer incharge, including making of space in wall/ window as per site requirement and necessary connections.(min 3 star). |
| 131 | Supply and fixing modular blanking plates on existing modular switch plates, excluding cost of plates. |
| 132 | Supply and fixing indicators on existing modular switch plates, excluding cost of plates. |
| 133 | Supply, Installation, Testing and Commissioning of 1200 mm sweep, ceiling fan with3 No. Aluminium blades, reqd. long down rod, 2nos. canopies, shackle kit,Power Factor not less than 0.9, Service Valueincluding safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, and including iron hookcomplete . USHA Striker/Havells Oyster matalic/CromptonAura/equivalent make as directed by engineer incharge. ( min 3 star) |
| 134 | Supply and fixing of 6A/250 V AC fan dimmerstep type 2 module with cover plate Anchor Roma plus/SSK NV/ equivalent make as directed by engineer incharge. |
| 135 | Supplying and fixing following way, Triple pole and neutral, sheet steel, MCB distribution board,(legrand/ Schinider/Hager/ABB/Havells make) 240 V, on surface/ recess,complete with tinned copper bus bar, neutral bus bar, earth bar,din bar, interconnections, powder painted including earthing etc.as required. (But without MCB/RCCB/Isolator)8 way (4 + 24), Double door |
| 136 | Providingof Chemical earthing as per ISstandards by way of digging 10\" deep pit then embedding 3 meter G.I Earthing electrode , 80mm dia. connecting the plate with main control board by 10 SWG copper wire with 1/2\" dia. Full thread brass nut and bolt and washers. Refilling of pit with chemical compound.(copper wire/strip) |
| 137 | Supply installation testing and comm. of flood light 100 W (warm, white), Epoxy powder coated die-cast aluminium housing (LM24) with elegantly designed heat sink for efficient thermal management, sturdiness & excellent corrosion resistant. PG9 gland is used for cable entry and provision for loopin-loopout class 1,IP66, IK 07, ,with high power LED\"s as light source with Built-In Potted IP67 electronic LED driver with APFC,lower THD, toughned glass and secondary lens,Open Circuit Protection, Over Voltage Protection, Surge Voltage Protection upto 10kV With Built In SPD & other safety test as per IS 15885 Part-2/Sec 13, IEC60598-1.Preferred make:Philips/ Havell/Wipro/Crompton make.The job also includes the angle iron stand of suitable size to be grouted in cement concrete with hold fasteners complete job. 50000 burning hoursand LM 79/LM 80 certification. |
| 138 | Main Panel |
| 139 | Design, Fabrication, Supplying, Installation, Testing and Commissioning of following panel, duly manufactured from CPRI approved manufacturer, made out of 2mm thick M.S. sheet steel , floor/wall mounted, vermin and dust proof, indoortype with suitable size of angle iron legs for grouting in the ground, with lockable type hinged doors, duly painted with provision for fixing of following switch gears, , Aluminium Bus Bar of various ratings after taking Derating factor into account,and other allied accessories etc. as required.( As per approved design,size may vary as per site requirement) |
| 140 | Providing and fixing of following protection equipments and other allied accessories including connections, inter connections, with suitable size of PVC insulated copper conductor cable including earthing etc. as required.Normal INCOMING:a) 400A4P MCCB 50 KA including spreader links,( Adjustable thermal and magnetic release) Legrand/ Shinider/ABB make/ sample to be approved before installation.. |
| 141 | b)4 No. of Aluminium Bus Bar of 800 Amp. |
| 142 | c) Digital meters and phase indicators -1 set. |
| 143 | d) onload Change over switch 250 Amp for generator front operated. |
| 144 | e) 4 No. of Aluminium Bus Bar of 600 Amp. |
| 145 | f) Digital meters and phase indicators -1 set. |
| 146 | OUTGOING:For Ground Floora)200 amp TPN MCCB 36 KALegrand/ Shinider/ABB/L&T sample to be approved before installation.. |
| 147 | b) 4 No. of Aluminium Bus Bar of 300 Amp. |
| 148 | c)160 amp TPN MCCB 36 KA Legrand/ Shinider/ABB/L&T sample to be approved before installation.. |
| 149 | d) 4 No. of Aluminium Bus Bar of 300 Amp. |
| 150 | e) Digital meters and phase indicators |
| 151 | (First floor Panel)Design, Fabrication, Supplying, Installation, Testing and Commissioning of following panel, duly manufactured from CPRI approved manufacturer, made out of 2mm thick M.S. sheet steel , floor/wall mounted, vermin and dust proof, indoortype with suitable size of angle iron legs for grouting in the ground, with lockable type hinged doors, duly painted with provision for fixing of following switch gears, , Aluminium Bus Bar of various ratings after taking Derating factor into account,and other allied accessories etc. as required.( As per approved design,size may vary as per site requirement) |
| 152 | Providing and fixing of following protection equipments and other allied accessories including connections, inter connections, with suitable size of PVC insulated copper conductor cable including earthing etc. as required.a)200A4P MCCB 36 KA including spreader links,( Adjustable thermal and magnetic release) Legrand/ Shinider/ABB/ sample to be approved before installation.. |
| 153 | b) 4 No. of Aluminium Bus Bar of 300 Amp. |
| 154 | c)Digital meters and phase indicators -1 set. |
| 155 | d)160 amp TPN MCCB 36 K Legrand/ Shinider/ABB/L&T sample to be approved before installation.. |
| 156 | e) 4 No. of Aluminium Bus Bar of 300 Amp. |
| 157 | f)Digital meters and phase indicators -1 set. |
| 158 | g) space for 12 way MCB\"s |
| 159 | (2nd floor Panel)Design, Fabrication, Supplying, Installation, Testing and Commissioning of following panel, duly manufactured from CPRI approved manufacturer, made out of 2mm thick M.S. sheet steel , floor/wall mounted, vermin and dust proof, indoortype with suitable size of angle iron legs for grouting in the ground, with lockable type hinged doors, duly painted with provision for fixing of following switch gears, , Aluminium Bus Bar of various ratings after taking Derating factor into account,and other allied accessories etc. as required.( As per approved design,size may vary as per site requirement) |
| 160 | Providing and fixing of following protection equipments and other allied accessories including connections, inter connections, with suitable size of PVC insulated copper conductor cable including earthing etc. as required.Normal INCOMING:a)200A4P MCCB 36 KA including spreader links,( Adjustable thermal and magnetic release) Legrand/ Shinider/ABB make/ sample to be approved before installation.. |
| 161 | b) 4 No. of Aluminium Bus Bar of 300 Amp. |
| 162 | c)Digital meters and phase indicators -1 set. |
| 163 | d)160 amp TPN MCCB 36 K Legrand/ Shinider/ABB/L&T sample to be approved before installation.. |
| 164 | e) 4 No. of Aluminium Bus Bar of 300 Amp. |
| 165 | f)Digital meters and phase indicators -1 set. |
| 166 | g) space for 12 way MCB\"s |
| 167 | Supply, laying, connecting and commissioning of 35 sq mm 3.5 core XLPE/ PVCInsulated and steel armored 1.1 KV grade Aluminum LT power cable of havells or eq.make for connecting main panel with sub panels incl. cost of required al. thimbles duly crimped. (Over head/ under ground).Complete job |
| 168 | Supply, laying, connecting and commissioning of 50 sq mm 3.5 core XLPE/ PVCInsulated and steel armored 1.1 KV grade Aluminum LT power cable of havells or eq.make for connecting main panel with sub panels , incl. cost of required al. thimbles duly crimped. (Over head/ under ground). |
| 169 | Supply, Installation, Testing and Commissioning of3 star rating 1.5 Ton Inverter type split Air Conditioner suitable for operation on AC supply single phase 50Hz 230V with hermetically sealed inverter compressor with air cooled condenser latest R410A/ R-32 refrigerant fan motor, start and run capacitors, relay and over load protector internal unit with one indoor and one outdoor unit. The indoor unit fitted on wall by employing suitable clamps and the outdoor unit will be placed on angle iron stand fitted with nut/bolts outside the room to avoid noise, including standard length of suitable size copper tubing covered with nitrilic foam, topping up with refrigerant for additional length of piping if required, PVC flexible drain pipe, suitable capacity 3 core sheathed/ PVC insulated copper cable and a battery operated wireless remote unit. The job includes repairs to walls wherever the same are cut and the AMC of AC for a period of one year from date of successful commissioning. (Daikin/ Blue Star/ LG/IFBLloyd/LG).sample to be approved before installation. |
| 170 | Supply, Installation, Testing and Commissioning of4KVA automatic relay type Voltage Stabilizer for 1.5 ton AC operating from input voltage 90-260V thereby producing 230+-3 output voltage.sample to be approved before installation. |
| 171 | Supply, Installation, Testing and Commissioning of32A industrial plug /socket incl. 3 pin top and 32 A DPMCB inside a closed box. |
| 172 | Supply, Installation, Testing and Commissioning of 50 kVA 300 ltr. Oil capacity Servo Voltage Stabilizer Three Phase Oil Cooled P-P 190-450 V : P-N:110-260 V T-Oilis to be provided with stabilizer conforming to IS 335,IEC296) unbalanced type servo voltage stabilizer(Chinar / Cosco/ Electricfield makeor as directed by EIC) having an inputvoltage ranging from 110 to 415 V ( phase to Neutral) balanced output voltage of 415V, +/- 1%.( Test certificate to be provided by the manufacturer).Complete Job.sample to be approved before installation. Incl CMC for three years from the date of commisioning CMC includes operation and maintenance of burnt out accessories and equipments. |
| 173 | Supply, Installation, Testing and Commissioning of 75 Inch Interactive Flat Panel, Android 14 or higher, Smart Digital Board, 8GB RAM 128GB ROM, Multitouch Screen LED Display Resolution Maximum 1080p Full HD or 4K with accessories power cord, remote, USB-C cable, USB A-B cable, HDMI cable, Touch Pen x 2.It includes replacement warrantyof item reckoned from the date of successful commissioning for a period of two years. sample to be approved before installation. |
| 174 | Supply, laying, connecting and commissioning of 95 sq mm 3.5 core XLPE/ PVCInsulated and steel armored 1.1 KV grade Aluminum LT cable for Service line, incl. cost of required al. thimbles duly crimped. (Over head/ under ground). |
| 175 | MECHANICAL COMPONENT |
| 176 | Fire Hydrant SystemSupply, installation, testing & commissioning of Single Headed, Gunmetal ISI marked oblique pattern hydrant landing valve with 80 mm dia flanged inlet and 63 mm dia instantaneous type female outlet complete with plastic cap and GI chain, twist release type plug and all accessories as per IS:5290-1983 (Type \"A\"). |
| 177 | Supply, installation, testing & commissioning of First-Aid fire hose reels wall mounting swinging type, fitted with of heavy duty mild steel construction with CI brackets, 25 mm dia. ball valve and 20 mm dia. x 36m long high pressure Hose Reel tubing as per IS:444 with Stainless Steel shut-off nozzle having 5 mm dia. orifice. The hose reel shall strictly confirm to IS:884-1985. |
| 178 | Providing and fixing 63mm dia 15m long non percolated rubberized fabric lined hose including gunmetal male and female instantaneous type coupling approved by fire authority, machine wound with copper wire complete in all respects, hose shall conform to IS:636 type II and coupling to IS:903-1975 (ISI marked) |
| 179 | Providing and placing in proper position gunmetal 63mm dia short size branch pipes with 20 mm dia nozzles with 63mm instantaneous coupling ISI marked (IS:903). |
| 180 | Providing and fixing standard fireman\"s axe with heavy insulated rubber handle conforming to IS: 926 complete. |
| 181 | Providing and fixing fully glazed MS fully welded construction double leaf door shutter for fire hydrantstation fabricated from MS 50x50x6 mm angle iron frame, fixed to wall and hinged MS 40x40x5 mm angle iron door shutter with required MS sash bars for glazing complete with locking arrangements, stove enamelled fire red finish with \"FIRE HYDRANT\" written in front. Approximate size 2100x1200 mm. |
| 182 | Providing and fixing 4 way gunmetal fire brigade inlet breaching head as per IS:904 specification tested for 20Kg/sq-cm with 63mm dia instantaneous type inlet and 150/100mm dia flanged outlet with built in check valve for fire brigade connection to under ground tanks and fire risers including companion flanges including nuts, bolts & washers etc. |
| 183 | Supply, installation, testing & commissioning of Gun Metal Fire brigade suction hose coupling (Draw-out Connection) with nut for female coupling as per IS:902-1974 complete with 100 mm dia. GI suction pipe and 100 mm dia. 1 No. CI foot valve flanged (to be connected to static water tank). |
| 184 | Providing and fixing MS cabinet (to enclose above Draw-out/Fire brigade inlet connections)fabricated from 16g sheet with full front glass door and locking arrangement duly painted with one coat of primer and two or more coats of synthetic enamel paint of approved make and shade and suitably mounted on a raised masonry platform as required (Approx.0.6 m x 0.6 m x 0.45 m). |
| 185 | Supply, installation, testing & commissioning of pressure gauges with isolation cocks and chrome plated copper pipes as hydrant station to read pressure from 0-25 kg/cm2 complete and of dial dia 150 mm |
| 186 | Supply, installation, testing & commissioning of air cushion tank (air-vessel) 250 mm dia.x1.0 m high with dished top, made of minimum 6 mm thick MS pipe/plate complete with 25 mm dia. brass air valve (ball valve, pressure gauge type), 25 mm dia brass stop cock, nipple, tees, B46 elbow, pipe and all accessories as required including fixing brackets. |
| 187 | Internal PipingSupply, installation, testing & commissioning of Black steel pipe (IS:1239 Part-I) heavy C-class including cutting, threading, welding etc. bends, elbows reducers, clamps, hangers etc. including cutting holes in brick or RCC walls/slabs and making good the same complete including the cost of structural work for supports fabricated from standard sections of required sizes and thickness e.g. MS rods, angles channels, slotted angle, etc., cutting to sizes, drilling welding fixing to insert plates, including painting with one coat of primer and two or more coats of synthetic enamel paint of approved make and red shade including all steel work. 100 mm dia |
| 188 | 80 mm dia |
| 189 | 65 mm dia |
| 190 | 50 mm dia |
| 191 | 40 mm dia |
| 192 | 32 mm dia |
| 193 | 25 mm dia |
| 194 | External PipingSupply, installation, testing & commissioningof mild steel black pipe (IS:1239/IS:3895) heavy C-class including cutting, screwing, welding etc. complete with fitting viz. tees elbow, bends, flanges, reducers etc. including providing anti-corrosive treatment (coating and wrapping) with 4 mm thick tape and holiday test check as per IS:10221 complete as required. 100 mm dia |
| 195 | 80 mm dia |
| 196 | Excavating trenches of required width for pipes, cables etc. including excavation for sockets and dressing of sides, ramming of bottom depth upto 900 mm including getting out the excavated soil rubble soling, sand filling upto 3\" above the pipe and then returning the soil as required in layers not exceeding 20 cms in depth including filling fine sand alround, consolidating each deposited layer by ramming, watering etc. and disposing of surplus excavated soil as directed, in all soils.Pipes, cables etc. exceeding 80 mm dia but not exceeding 300 mm dia |
| 197 | Providing and laying cement concrete 1 : 3 : 6 (1 cement : 3 coarse sand : 6 graded stone aggregate of nominal size 40 mm in thrust blocks at bends, tees etc and alsos as support to vertical pipes of yard hydrants including excavation and refilling of earth work centering and shuttering for concrete complete in all respects. |
| 198 | AUTOMATIC SPRINKLER SYSTEM |
| 199 | Supply, Installation, Testing & Commissioning of 15 mm dia. quartzoid bulb type GM Sprinkler head (K-5.6) suitable to operate at 68 degre CStandard Pendent/Upright type in brass/chrome finish. |
| 200 | Supply, installation, testing & commissioning of 25mm dia automatic air release valves sprinkler ring main as per standard fire practice. |
| 201 | Supply, installation, testing & commissioning of hydraulically Operated Alarm Check Valve 150mm dia with water alarm gong and complete with necessary fittings & supports |
| 202 | Providing, fixing, testing and commissiong ofelectrically operated flow indicating switches with threaded connection for a minimum flow of 90 lpm for indicating water flow in sprinkler branch line on each floor with necessary junction box installed in accessible place on 150/100 mm Line |
| 203 | Supply, installation, testing & commissioning of installation zonal control valve assembly comprising of vertical wet alarm valve, including the cost of butterfly valve, hydraulic alarm motor & gong, 15 mm dia. test valve, 50 mm dia. drain valve and all necessary trimming connections including 2 nos. pressure gauges as per manufacturer\"s catalogue to be installed in each floor. |
| 204 | Supply, installation, testing & commissioning of 25 mm dia inspecting & testing assembly with gunmetal isolation valve, gunmetal sight glass, bypass valve & connected to drain line complete (excluding the cost of drain pipe). |
| 205 | Supply, installation, testing & commissioning of gun metal ball valve 50mm dia for flushing connection. |
| 206 | Supply, installation, testing & commissioning of gun metal ball valve 25mm dia. |
| 207 | FIRE PUMPS, VALVES & ACCESSORIES |
| 208 | Supply, lnstallation, testing & Commissioning. of Electrical Motor Diven Automatic pressurisation (Terrace) pumping set (factory Filted) consisting of the following as per specifications.a) Providing and fixing of horizontal split casing single/multi stage, single outlet punping set with bronze impeller & with gland capable of delivering 450 LPM against at total head of 70 M with Cl. body and connccted by a flexible coupling to a totally cnclosed fan cooled induction motor mounted on a common structural base plates with all punp accessories complete as per specifications including pressure gauge with gunmttal isolation valves and anti vibration pads, motor to be suitable for 415 volts, 3 phase, 50 cycles AC supply (Specification as per fire fighting requirements).b) Squirrel cage induction motor totally enclosed fan cooled type suitable for 415 volts ±15%, 3 phase 50 Hz AC supply of suitable capacity (approx. 15 KW) for the above pump with synchronous speed of 3000 RPMconfining to IS:325 & duly coupled with above pump coupled with flexible coupling inciuding earthening as per relevant Indian Standard and specifications.c) Common bed plate for mounting pump and motor fabricated of suitable MS channel as per manufacturer\"s recommendations.d) Suitable RCC Pump foundations as per manufacturer\"s design 4 Nos Duniop Anti vibration (cushy foot) heavy duty mounting pads. |
| 209 | Providing, fixing, testing and commissiong of double flanged vertical air vessel fabricated from 10mm MS plate with dished ends from 10mm MS plate, outside with one coat of primer and two coats of synthetic enamel paint of approved shade, complete with approved quality of pressure switches, pressure gauge and all other required accessories to operate commonly main fire pump drop of pressure, automatically at required pressure settingRecommended dia.: 450mmHeight of shell : 2000mmWorking pressure: 5.5 kg/cm2 Test Pressure : 10 kg/cm2 |
| 210 | Panel for fire pumps |
| 211 | Providing and fixing motor conrol centres fabricated out of l6 gauge M.S. shect with powder Coated finish. The control panels should he compatible withHP. of the motor as under and as per specitications with automatic star delta starter.One incoming main isolation MCCB TPN of Min. 100 Amps. rating. Fully taped aluminium bus bar of required capacity in a separate bus bar chamber. Isolation MCCB of required rating and with push button automatic starter as per requirement with and ON/OFF indicating lights for One pump of 20 HP Single phasing preventors of suitable rating for motor.Rotary type Auto/Manual/ ON/OFF selection Switches.One 96 mm square panel type voltmeer reading 0-500 V with rotary selector switch for reading voltage between phases.One 96mm square panel type Amp. meter reading 0-500 Amp. for pump.Appropriate etched plastic plate for each starter/switch. |
| 212 | Providing, fitting of total 10,000 ltr (5000 ltr x 2 No.) terrace HDPE tank with necessary connections along with foundations and Equalising valves and pipes. |
| 213 | Providing and fixing resilient rubber neoprene lined single arch vibration eliminators suitable for raw water upto 450C temperature working pressure 5.5 kg/cm2 and test pressure 10.0 kg/cm2 with unit control including nuts, bolts matching flanges (screwed or welded)complete with 1.5mm thick compressed asbestos gasket of same rating.65 mm dia |
| 214 | Providing and fixing CI double flanges Y suction strainer (PN 2.0) “Y” type including, nuts, bolts matching flanges (screwed or welded)complete with 1.5mm thick compressed asbestos gasket of same rating .65 mm dia |
| 215 | Providing and fixing butterfly valves, wafer end type class PN 1.6 as per IS: 13095-1991 or BS: 5155, including necessary nuts, bolts, gaskets etc. complete (without gear box) & matching flanges (screwed or welded)complete with 1.5mm thick compressed asbestos gasket of same rating .50mm dia nominal bore. |
| 216 | 65mm dia nominal bore. |
| 217 | 100mm dia nominal bore. |
| 218 | Providing and fixing CI double flanged horizontal/ vertical typenon-return valve including nuts, bolts,matching flanges (screwed or welded)complete with 1.5mm thick compressed asbestos gasket of same rating, complete to IS:5312, part-I, swing type, class PN 1.6.100mm dia nominal bore. |
| 219 | 65mm dia nominal bore. |
| 220 | Providing and fixing of sluice valve of 1.6 PN rating flanged at both ends of following sizesincluding necessary nuts, bolts, gaskets etc. complete (without gear box)100 mm dia nominal bore. |
| 221 | Providing earthing station with GI Earthing Plate (600mm x 600mm) 8 mm thick for pumps and MCC panels including excavation, CI manhole cover and frame complete as per specifications and IE rules. |
| 222 | GI Strip of following sizes 25 x 6 mm G |
| 223 | Providing and fixing pressure switch (for operation at 0-25 kg/cm2) with required fittings and accessories complete. |
| 224 | Structural Steel like angles, channels etc at various locations for supporting Tanks, Valves etc |
| 225 | Providing and fixing liquid level controller for fire pump to cut offin case low level of water in tank including cables, panneletc. and makingnecessary connection to panel and commissioning. |
| 226 | P/F of electrical cables from main incomer to control panel and from Control panel to Electric driven fire pump as per sizes given.3.5 Core x 35 Sq mm Al Cable |
| 227 | 100mm width x 50mm depth x 2mm thickperforted M.S. cable trays including horizontal and vertical bends, reducers, tees, cross members and other accessories as required and duly suspended from the ceiling with M.S suspenders and including painting etc. as reqd. |
| 228 | Providing and Fixing of ISI marked (IS:15683:2006) protable CO2 type fire extinguisher type 4.5 kg capacity, including valve, discharge hose of not less than 10 mm dia and 1 metre long complete in all respects including initiall filled CO2 gas confirming to IS : 307 - 1966 & filled to a filling rate of not more than .667 and wall suspension bracket. |
| 229 | Providing and Fixing of ISI marked (IS:15683:2006) protable ABC type portable extinguisher of capacity 4 kg , dry powder type (Gas Cartridge) confirming to IS: 15683 : 2006 with cylinder initially fully charged with dry powder, ISI marked confirming to IS: 15683 : 2006 complete with stsndard discharge valve with tube , CI bracket for wall mounting. |
| 230 | Providing and fixing offire bucket stands for 6 No. Bucketsat designated locations. |
| 231 | Providing and fixing of fire buckets of 9 Litre capacity to the stands. |
| 232 | Supply and fixing of illuminated Fire exit signages. This sign may be used to Indicate all exits which can be used in the event of an emergency. It shall be accompanied: by an arrow as per IS-12349(1988) standards. |
| 233 | Third Party Vetting of Design Drawing through IIT/NIT/DIQC |
AI Tender Summary
Tender Timeline
Aug 06, 2025
11:30 IST
Tender Published
Tender notice published.
Completed
Aug 05, 2025
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Completed
Aug 09, 2025
18:00 IST
Corrigendum-2 Issued
Clarifications on tender conditions and amendments issued.
Completed
Aug 09, 2025
18:00 IST
Corrigendum-3 Issued
Clarifications on tender conditions and amendments issued.
CompletedAug 09, 2025
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedAug 11, 2025
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender