Tender For Sh 6 Shiroda Bazar To Gananath English High School Nirankal Via Dhulpe (Length- 9.660 Km) -- 1 Pavement Work 2 SUB HEAD : PREPARATORY WORKS ,SITE CLEARANCE , DISMANTLING 3 Clearing and Grubbing Road Land ( By manual means) including uprooting wild vegetation , grass ,bushes, shrubs , saplings and trees of girth upto 300mm , removals of stumps of such trees cut earlier & disposal of unserviceable materials & stacking of serviceable materials to be used or auctioned upto a lead of 1000 m including removal and disposal of top organic soil not exeeding 150mm in thickness as per technical specification - clause 201.1 and direction of E/I 4 SUB HEAD : EARTHWORK 5 Box CuttingExcavation for roadway in soil by mechanical means including cutting and pushing the earth to site of embankment upto a distance of 100 m, including trimming bottom and side slopes in accordance with requirements of lines, grades and cross-sections. 6 Construction of embankment with approved materials deposited at site and obtained from roadway cutting and excavation from drain and foundation of other structures graded and compacted to meet requirement of Tables 300.1 and 300.2 as per Technical Specification Clause 301.5 7 Construction of embankment with approved material obtained from borrow pits with a lift upto 1.5 m, transporting to site, spreading, grading to required slope and compacting to meet requirement of Tables 300.1 and 300.2 with a lead upto 1000 m as per Technical Specification Clause 301.5 8 Construction of Subgrade and Earthen Shoulders 9 Construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of Table 300.2 with lead upto 1000 m & 100 m as per Technical Specification Clause 303.1. (Including Royality &Labour Cess). 10 SUB HEAD : PAVEMENT LAYERS - GSB & WBM ITEMS 11 Granular Sub-base with Well Graded 12 ii) For Grading II Material 13 Construction of granular sub-base by providing well graded material, spreading in uniform layers with tractor mounted grader arrangement on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per Technical Specification Clause 401. 14 Water Bound Macadam with Stone Screening Type B Gr- III 15 Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 KN in stages to proper grade and camber, applying and brooming, stone screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 3 as per Technical Specification Clause 405. 16 SUB HEAD : BITUMINOUS ITEMS 17 Prime Coat (Low porosity) 18 Providing and applying primer coat with bitumen emulsion (SS-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70-1.0 kg/sqm using mechanical means as per Technical Specification Clause 502 19 Tack Coat 20 Providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surface tretaed with Primer and clened with hydriloc broom as per technical specification aclouse 503. 21 Bituminous Macadam 22 Providing and laying bituminous macadam with 100-120 TPH hot mix plant producing an average output of 75 tonnes per hour using crushed aggregates of specified grading premixed with bituminous binder, transported to site, laid over apreviously prepared surface with paver finisher to the required grade, level and alignment and rolled as per clauses 501.6 and 501.7 to achieve the desired compaction. 23 Bituminious Concrete 24 Providing and laying bituminious concrete with 40-60 TPH Drum Mix type Hhot mix plant producing an average output of 50 tonnes per hour using crushed aggregates of specified grading, premixed with bituminious binder to mix with filler, transporting the hotmix to work site, with all leads laying with a hydrostatic/hydraulic paver finisher with sensor control to the required grade, level and alignment, using antistripping agent rolling with smooth wheeled, vibratory or tandem rollers to achieve the desired compaction complete as per MoRT&H Specifications Clause 509. 25 Side Drains 26 Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material. 27 Sand Filling in Foundation :-- Sand Filling in Foundation Trenches as per drawing and technical specification Clause 1108 28 Providing R.C.C.M20 in foundation -do-do- all complete 29 Plain/reinforced cement concrete in substructure complete as per drawings and technical specification RCC M-25 Grade 30 HYSD bars 31 Protection Works 32 Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material. 33 Providing PCC M 15 (1:2.5:5) concrete for plain concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 34 Random Rubble Stone Masonry in 1:3 cement mortar for Foundation complete as per drawing & technical specification clauses 702, 704, 1202 and 1204 35 Providing Weepholes in brick masonary , Plain / Reinforced concrete abutement , wing wall , return wall with 100 mm dia AC pipe extending through the full width of the structure with slope of 1V: 20H towards drawing 36 Plastering with cement mortar (1:4 ) on brick work in sub-structure as per Technical Specifications. 37 Plain/Reinforced cement concrete(M-20) in substructure complete as per drawings and technical specification Clauses 802, 804, 805, 806, 807, 1202 ans 1204 38 SUB HEAD : ROAD FURNITURES , KM STONES , PMGSY LOGO, TRAFFIC & DIRECTION SIGN & ROAD SAFETY WORK 39 1700 Kilometre stone 40 Reinforced cement concrete M15 grade kilometre local stone of standard design asper IRC:8 fixing in position including painting and printing , etc as per drawing and technical specification clause 1703. 41 i) 5th km stone (Precast) 42 ii) Ordinary Kilometer Stone (Precast) 43 iii) 200 m stone (Precast) 44 (I)Providing and Fixing Logo of Project 45 Providing and fixing of typical PMGSY informatory sign board with Logo as per MORD specifications and drawing. Three MS Plates of 1.6 mm thick, top and middle plate duly welded with MS flat iron 25mm x 5m size on back on edges. The lower plate will be welded with MS angle iron frame of 25mm x 25mm x 5mm. The angle iron frame of the lower most plate and flat iron frame of middle plate will be welded to 2 nos. 75mm x 75 mm of 12 SWG sheet tubes posts duly embedded in cement concrete M-15 grade blocks of 450mm x 450mm x 600mm, 600mm below ground level. The top most diamond plate will be welded to middle plate by 47mm x 47mm of 12 SWG steel plate tube. All M.S. will be stove enameled on both sides. Lettering and printing arrows, border etc. will be painted with ready mixed synthetic enamel paint of superior quality in required shade and colour. All sections of framed posts and steel tube will be painted with primer and two coats of epoxy paint as per drawing Clause 1701 and Annexure 1700.1 46 a) Providing and Fixing Logo of Project As per Drawing 47 b) Citizen Information Board As per Drawing 48 c) 5 Year Maintenance Informatory Board 49 Printing New Letters and Figures of any Shade 50 Printing new letter and figures of any shade ( letter and figures of any shade with synthetic enamel paint black or any other approved colour to give an even shade) 51 Boundary Pillar/Gaurd Post 52 Reinforced cement concrete M15 grade boundary pillars/local stone of standard design as per IRC:25, fixed in position including finishing and lettering but excluding painting as per drawing and Technical Specification Clause 1704 53 Traffic sign 54 Providing and fixing of retro reflective cautionary , mandatory and informatory sign board as per IRC :67 made of 1.5 mm thick MS steel duly stove white colour in front and gray colour on back with red reflective border of 65 mm width and required letters and figures with reflective tape engineering grade as per clause 1701.3.9 of MORD for rural road of required shade and colour supported and welded on 47mmx47mmx12swg sheet tube firmly fixed to the ground by mean of properly designed foundation with M15 grade cement concrete 450x450x600 mm ,600mm below ground level as per approved drawing clause 1701.2.2. 55 ii) 600 mm equilateral & triangle 56 iii) 600 mm circular 57 v) 600 mm x 450 mm rectangular 58 vii) 900 mm side octagon, OR 59 f) 300mm x 900mm Rectangle - Hazard Marker Sign 60 g) 600mm x 500mm Rectangle - Chevron Sign 61 Road Markers/Road Stud with Lens Reflector 62 Providing and fixing of road stud 100 x 100 mm die cast in aluminium, resistant to corrosive effect of salt and grit, fitted with lense reflectors, installed in concrete or asphaltic surface by drilling holes 30 mm upto a depth of 600 mm and bedded in a suitable bituminous grout or epoxy mortar, all as per BS:873 (Part 4) 1973. 63 Metal Beam Crash Barrier Type - A, W : Metal Beam Crash Barrier 64 Providing and erecting a W metal beam crash barrier providing and erecting W Beam Crash barrier comprising of following three factory made unites-viz. 1) W Beam 2) Spacer Block 3) Vertical Post. The W beam 3mm thick cold roll formed guard rail raw material Conforming to IS-5986-2011 with minimum Grade 255 & with minimum yield stress of 255 Mpa which is fixed by bolted connection to spacer block C-channel of size 150mm* 75mm & 5mm thick, 33cm height spaced 2meter centre to centre, fixed to Vertical Post C-channel of size 150mm*75mm&5mm thick cold roll formed section made from HR coils raw material conforming to IS- 5986-2011 with minimum Grade 255 & with minimum yield stress of 255MPa, with 70cms free height above road or Ground level, and embedded to 110cms deep in cement concrete block of size 35cm*35*115cm or as directed by Engineer Incharge, assembled & fixed as per drawings of MORTH&H Circular No.RW/NH/33022/1/94-DO/III, dated 24/6/1994 & construction operation as per 811 or revevant MORT&H specifications for Roads & Bridge Works (latest edition). All fittings (bolts, nuts, fasteners, washers etc.) shall be conforming to IS:1367 & IS:1364 & galvanished by hot dip zinc coated process @0.55kg/m2 conforming to relevent IS specifications all etc. complete 65 Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface 66 Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes. 67 Overhead Signs (Providing and erecting overhead signs with a corrosion resistant aluminium alloy sheet as per IRC :67 2012 made of high intensity Grade sheeting using ASTM sheeting C type XI micro prismatic retro reflective material with vertical and lateral clearance given in clause 802.2 and 802.3 and installed as per clause 802.7 over a designed support system of aluminium alloy or galvanised steel trestles and trusses of sections and type as per structural design requirements and approved plans)A 10 years warranty for Retro Reflective Sheeting from the original sheeting manufacturer & a certified copy of three years outdoor exposure report from an independent test lab for the product offered shall be submitted by the contractor. 68 a) Truss and Vertical Support 69 b) Aluminium alloy plate for over head sign 70 CROSS DRAINANGE STRUCTURES 71 12.II RCC slab culvert( 1m Span-2 Nos,2m Span-7Nos, Two Span 3m Span RCC small bridge-1 Nos 72 Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material. 73 Sand Filling in Foundation Trenches as per drawing and technical specification Clause 1108. 74 Rubble packing with hard laterite stone under floors including watering, ramming & consolidating etc. complete 75 Providing PCC M 15 (1:2.5:5) concrete for plain concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 Qty. below G.L. 76 Providing PCC M 15 (1:2.5:5) concrete for plain concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203. Qty above G.L. 77 Plain/reinforced cement concrete in substructure complete as per drawings and technical specification Clauses 802, 804, 805, 806, 807, 1202 ans 1204. ( M15 (PCC 1:2.5:5) 78 Plain/Reinforced cement concrete(M-20) in substructure complete as per drawings and technical specification Clauses 802, 804, 805, 806, 807, 1202 ans 1204 79 RCC M25 in Deck Slab :-- Providing and laying reinforced cement concrete in superstructure (Deck slab M25) as per drawing and technical specifications Clauses 800, 1205.4, 1205.5 80 Supplying, fitting and placing HYSD bar reinforcement in super-structure complete as per drawing and technical specifications 81 Providing and filling joint sealing compound as per drawings and technical specifications with coarse sand and 6 per cent bitumen by weight 82 Providing Weepholes in brick masonary , Plain / Reinforced concrete abutement , wing wall , return wall with 100 mm dia AC pipe extending through the full width of the structure with slope of 1V: 20H towards drawing. 83 Drainage spouts complete as per drawing and technical specifications Clause 1209 84 12) V Dismantling of Cross Drainage Works 85 Dismantling of existing structures like culverts, bridges,retainingwallsandotherstructure comprising of masonry, cement concrete, wood work, steel work, includingT&P and scaffoldingwherever necessary, sorting the dismantled material, disposal of unserviceablematerialandstackingtheserviceable materialwithallliftsandleadof1000masper Technical Specification Clause 202. 86 Cement Concrete 87 Reinforced Cement Concrete 88 Dismantling of existing structures like culverts, bridges,retainingwallsandotherstructures comprisingofbrickmasonry,includingdisposalof unserviceablematerialandstackingtheserviceable materialwithallliftandleadof1000masper Technical Specification Clause 202. 89 Cement mortar 90 RemovingalltypesofHumepipesandstacking withinaleadof1000mincludingEarthworkand DismantlingofMasonryWorksasperTechnical specification Clause 202. 91 Upto 300 mm dia Hume pipe 92 Above 600 mm dia Hume pipe 93 Above 900 mm dia Hume pipe 94 12} Construction ofCross Drainage structures. 95 I) HUMP PIPE CULVERT (Single Row1000mm dia H.P. Culvert:- 4 Nos.) 96 Earthwork in excavation for structures as per drawing and technica specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material. 97 Providing M15 (PCC 1:2.5:5) as levelling course in foundation :--Providing PCC M 15 (1:2.5:5) concrete for plain concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 98 Plain/reinforced cement concrete in substructure complete as per drawings and technical specification Clauses 802, 804, 805, 806, 8071202 and 1204 ( M15 (PCC 1:2.5:5) 99 Providing and laying RCC pipe NP-3 for culverts on first classbedding of PCC M10 material in single row including fixing collarwith cement mortar 1:2 but excluding excavation, protectionworks,backfilling concrete and masonary works in head walls and parapets as per clause 1106 100 Painting on Parapet Wall (Black & White Strips) Painting twocoats including primer coat after filling the surface with syntheticenamel paint in all shades on new, plastered / concrete surfaces as per drawing and Technical Specification Clause 1701. 101 Add 1% Labour Cess on total constructions cost
