Various External Works And Other Remaining Works At Nursing College Sri Ganganagar - Earth work in excavation by mechanical means (Hydraulic excavator )/ manual means over areas (exceeding 30cm in depth. 1.5m in width as well as 10 sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.5 m , disposed earth to be levelled and neatly dressed : All kinds of soil 2 34.411 CUM 195.00 6,710.06 INR Six Thousand Seven Hundred & Ten and Paise Six Only Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level. 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size). 3 20.153 CUM 3288.00 66,263.74 INR Sixty Six Thousand Two Hundred & Sixty Three and Paise Seventy Four Only 3 Centering and Shuttering with plywood or steel sheets including strutting, propping bracing both ways and removal of formwork for foundation , footings, strap beam, raft , bases of columns etc. 4 27.112 SQM 134.00 3,632.95 INR Three Thousand Six Hundred & Thirty Two and Paise Ninety Five Only 4 Providing and laying in position Ready mix concrete manufactured in fully automatic Batching Plant and transported to site in transit mixer for having continous agitated mixer, manufactured as per approved mix design of specified grade of RCC work including pumping of R.M.C. from transit mixer to site of laying , exculding the cost of centering, shuttering and reinforcement with all lead and lift including cost of admixtures in recommended portion as per IS 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer in charge . All works upto floor V floor M20 grade Design Mix by using min 400 Kg of cement per cum of concrete 5 13.993 CUM 5584.00 78,134.14 INR Seventy Eight Thousand One Hundred & Thirty Four and Paise Fourteen Only 5 Providing and fabricating reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor five level. (Original producers who manufacture billet directly from iron ores and roll the bilets to produce steel conforming to IS:1786) Thermo-mechanically Treated bars (Conforming of relevent IS code) 6 1819.025 KG 67.00 1,21,874.70 INR One Lakh Twenty One Thousand Eight Hundred & Seventy Four and Paise Seventy Only 6 Suspended floors, roofs, landings, staircases, balconies, girders, cantilevers, bands, coping bed plates, anchor blocks, sills, chhajjas, lintel, beam, plinth beam etc. 7 72.190 SQM 286.00 20,646.43 INR Twenty Thousand Six Hundred & Forty Six and Paise Forty Three Only 7 Brick masonry with F.P.S. bricks of class designation 100 in foundation and plinth with bricks Cement mortar 1 : 6 (1 cement : 6 coarse sand) 8 17.318 CUM 3285.00 56,890.14 INR Fifty Six Thousand Eight Hundred & Ninety and Paise Fourteen Only 8 Brick work with F.P.S. bricks of class designation 100 in superstructure above plinth level upto floor V level in all shapes and sizes in : Cement mortar 1 : 6 (1 cement : 6 coarse sand) 9 37.879 CUM 3924.00 1,48,635.99 INR One Lakh Forty Eight Thousand Six Hundred & Thirty Five and Paise Ninety Nine Only 9 Providing and fixing pressed steel door frames confirming to IS 4351 manufactured from commercial mild steel sheet of 1.25 mm thickness including hinges jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25mm, or base ties of 1.25mm pressed mild steel welded or rigidly fixed together by mechanical means, adjustable lugs with split end tail to each jamb including steel butt hinges 2.5mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface including filling with CC 1:2:4(M15 grade) complete as directed by Engineer-in-charge : Profile E 10 15.400 RMT 434.00 6,683.60 INR Six Thousand Six Hundred & Eighty Three and Paise Sixty Only 10 Providing and fixing external grade board solid core single leaf flush door shutters ISI 2202-67 marked using Phenol formal dehyderesin in glue both sides with approved steel fittings complete as per annexure A :35 mm thick .Commercial Veneer both side 11 3.420 SQM 1807.00 6,179.22 INR Six Thousand One Hundred & Seventy Nine and Paise Twenty Two Only PRICE SCHEDULE (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) Percentage BoQ Tender Inviting Authority: GM RSRDCC Ltd Jaipur Name of Work:-Various External works and other Remaining works at Nursing College Sri Ganganagar Contract No: NIT No 230/2025-26 (S.No.-03) Validate Print Help NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER # TEXT # Sl. No. Item Description Item Code / Make Quantity Units Estimated Rate TOTAL AMOUNT TOTAL AMOUNT In Words 1 2 3 4 5 6 53 55 11 Providing and fixing steel glazed window frame made out of 80x40 mm hollow sheet section of 16 gauge thickness, joint mitred welded and grinded including hold fast of steel lugs 13mm x 3mm and 15 Cm long embedded in C C block 15 x 10 x 10 Cm of 1:3:6 nominal concrete and including fixing of pivoted hinges of superior quality, window shutters made out of 50 x 25.0 mm hollow steel section 15 mm paitam of 18 gauge thickness, joint mitred and grinded including 10mm x 10mm square bars welded to frame for paitam fixing float glass 4mm thick panes with glazing clips and metal sash putty and fixing of shutters frames peg stay, U shape handle 100 mm long, tower bolts 100 mm long of steel powder coated superior quality including fixing and jointing with frame hinges priming coat with steel primer complete in all respect as per direction of Engineer-in –charge Window openable. 12 2.342 SQM 2413.00 5,652.21 INR Five Thousand Six Hundred & Fifty Two and Paise Twenty One Only 12 Plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finish :20mm thick. 13 642.692 SQM 149.00 95,761.15 INR Ninety Five Thousand Seven Hundred & Sixty One and Paise Fifteen Only 13 Providing and fixing Granite stone slab mirror polished and machine edge cut in walls, pillars, steps, Shelves, Sills Counters, Floors etc. laid on 12mm (Av.) thick base of cement mortar 1:3 (1 cement : 3 coarse sand) jointing with white cement mortar 1:2 (1white cement : 2 marble dust) with pigment to match the shade of the marble slab including grinding, rubbing and polishing complete.Jhunjhunu / Jalore (Red / Choclate Colour)1501 Cm2 to 3600 Cm2 Tiles 14 264.200 SQM 2473.00 6,53,366.60 INR Six Lakh Fifty Three Thousand Three Hundred & Sixty Six and Paise Sixty Only 14 Extra for providing edge moulding to 15-18mm thick marble/ Granite stone counters, Vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. Granite Work 15 715.000 RMT 247.00 1,76,605.00 INR One Lakh Seventy Six Thousand Six Hundred & Five Only 15 Grading roof for water proofing treatment with water proffing compound Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) 16 6.300 CUM 4302.00 27,102.97 INR Twenty Seven Thousand One Hundred & Two and Paise Ninety Seven Only 16 Providing & laying broken glazed titles on roof ( broken glazed tiles not less than 9 Kg/Sqm) on top of hot bitumen @ 1.7 Kg/Sqm. (1.40 Kg of VG-40 (30/40 )grade and 0.30 Kg/Sqm. Of VG-10 (80/100) grade) and joints filled with cement mortar 1 :2 (1 cement:2 marble dust mixed with water proofing compund all complete as per direction of Engineer-in-charge. 17 34.715 SQM 311.00 10,796.33 INR Ten Thousand Seven Hundred & Ninety Six and Paise Thirty Three Only 17 Providing and applying white cement based putty over plastered surface to prepare the surface even and smooth complete New Plastered Surface (three or more coats) 18 642.692 SQM 84.00 53,986.15 INR Fifty Three Thousand Nine Hundred & Eighty Six and Paise Fifteen Only 18 Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10mm and down gauge) including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : 19 33.700 RMT 124.00 4,178.80 INR Four Thousand One Hundred & Seventy Eight and Paise Eighty Only 19 Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade including all scaffolding: Two or more coats on new work including prepartion of base with primer, putty, lippy etc complete in all respect. 20 642.692 SQM 78.00 50,130.00 INR Fifty Thousand One Hundred & Twenty Nine and Paise One Hundred Only 20 Supplying and fixing rolling shutters of approved make, made of 80 x 1.25mm. M.S. laths interlocked together through their entire length and jointed together at the end by end locks mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete including cost of spring hooks, providing and fixing necessary 27.5cm. long wire springs grade No. 2 and M.S. top cover 1.25mm thick for rolling shutters as per design. (Clear openable area to be measured for payment). 21 12.000 SQM 1870.00 22,440.00 INR Twenty Two Thousand Four Hundred & Forty Only 21 Providing and fixing stainless steel railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-incharge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).For stainless steel( Grade 304) 22 220.500 KG 585.00 1,28,992.50 INR One Lakh Twenty Eight Thousand Nine Hundred & Ninety Two and Paise Fifty Only 22 Applying priming coat : With ready mix pink or gray primer of approved brand and manufacture on wood work hard and soft wood. 23 2718.144 SQM 32.00 86,980.61 INR Eighty Six Thousand Nine Hundred & Eighty and Paise Sixty One Only 23 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work 24 374.164 SQM 67.00 25,068.98 INR Twenty Five Thousand &Sixty Eight and Paise Ninety Eight Only 24 Providing and fixing aluminum work for doors ,windows, ventilators and partition with extruded built up standard tubular / appropriate Z sections and other sections of approved make conforming to IS :733 and IS :1285, fixed with rawl plugs and screws or with fixing clips ,or with expansion hold fasteners including necessary filling up of gap. at junctions , at top ,bottom and sides with required PVC/neoprene felt etc. Aluminium section shall be smooth ,rust free, straight ,mitered and jointed mechanically wherever required including cleat angle Aluminium snap beading for glazing /paneling , C.P. brass/ stainless steel screws Al. Tower bolt & Al. handle & Al. Aldrop etc.,all complete as per architectural drawings and the directions of Engineerin – charge .(Glazing and paneling to be paid for separately).For fixed portion Powder coating aluminum ( minimum thickness of powder coating 50 micron) 25 581.250 KG 352.00 2,04,600.00 INR Two Lakh Four Thousand Six Hundred Only NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER # TEXT # Sl. No. Item Description Item Code / Make Quantity Units Estimated Rate TOTAL AMOUNT TOTAL AMOUNT In Words 1 2 3 4 5 6 53 55 25 For shutters builtup standard tubular sections of openable doors ,windows & ventilators including providing & fixing hinges / rollers etc. and making provision for fixing of fittings wherever required (lockes shall be paid for separately). Powder coating aluminum ( minimum thickness of powder coating 50 micron) 26 193.750 KG 378.00 73,237.50 INR Seventy Three Thousand Two Hundred & Thirty Seven and Paise Fifty Only 26 Providing and fixing aluminium round shape handle of outer dia 100mm with SS screws etc. Complete as per direction of Engineer-incharge Powder coated minimum thickness 50 micron aluminium 27 193.750 EACH 102.00 19,762.50 INR Nineteen Thousand Seven Hundred & Sixty Two and Paise Fifty Only 27 Providing and fixing IS : 3564 marked aluminium extruded section body tubular type universal hydraulic door closer with double speed adjustment with necessary accessories and screws etc. complete. 28 11.000 EACH 1052.00 11,572.00 INR Eleven Thousand Five Hundred & Seventy Two Only 28 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings, this included jointing of pipes & fittings with one step CPVC solvent cement , trenching refilling & testing of joints complete as per direction of 29 160.000 RMT 425.00 68,000.00 INR Sixty Eight Thousand Only 29 P & F Pilllar Cocks (IS :8934 Mark) of superior quality and approved make:C.P. Pillar cock, Swan-neck with casted spout, 15mm nominal bore. 30 22.000 EACH 685.00 15,070.00 INR Fifteen Thousand &Seventy Only 30 P & F lst quality WVC Urinal (IS:2556 mark) with 25mm dia G.I. waste pipe, dome waste couplings, concealed iron brackets or screws etc complete. WVC Flat Back half stall Urinal size 580x380x350 mm/ Angle back 450x375x350 type liped front.. 31 6.000 EACH 1985.00 11,910.00 INR Eleven Thousand Nine Hundred & Ten Only 31 Filling available excavated earth (excluding rock) in trenches, plinth side of foundation etc. in layers not exceeding 20 cm. in depth, consolidating each deposited layer by ramming and watering including lead up to 50 meter and with all lift. 32 282.885 CUM 92.00 26,025.41 INR Twenty Six Thousand &Twenty Five and Paise Forty One Only 32 CARRIAGE OF MATERIALS Earth, sand, gravel, unscreened kankar, lime, flyash, morrum, manure or sludge 33 282.885 CUM 178.50 50,494.95 INR Fifty Thousand Four Hundred & Ninety Four and Paise Ninety Five Only 33 PART-B ROAD WORK 34 33.1 Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level. 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size). 35 121.388 CUM 3288.00 3,99,122.10 INR Three Lakh Ninety Nine Thousand One Hundred & Twenty Two and Paise Ten Only 34 Providing and laying factory made chamfered edge Plastic coated Designer Cement Concrete paver blocks of required strength, thickness & size/shape, made by table vibratory method, to attain superior smooth finish using PU or equivalent moulds, laid in required Grey/Yellow/Red or any other colour & pattern over 50mm thick compacted bed of coarse sand, compacting and proper embedding / laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand in footpath, parks, lawns, drive ways or light traffic parking etc. all complete as per manufacturer’s specifications & direction of Engineer -in- Charge: 80 mm thick c.c. paver block of M-30 grade with approved color design and pattern. 36 719.250 SQM 565.00 4,06,376.25 INR Four Lakh Six Thousand Three Hundred & Seventy Six and Paise Twenty Five Only 35 Brick masonry with F.P.S. bricks of class designation 100 in foundation and plinth with bricks Cement mortar 1 : 6 (1 cement : 6 coarse sand) 37 26.043 CUM 3285.00 85,552.44 INR Eighty Five Thousand Five Hundred & Fifty Two and Paise Forty Four Only 36 Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead and including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/ vertical or curved surfaces) excluding the cost of purlins, rafters and trusses and including cutting to size and shape whenever required.1.00 mm thick with zinc coating not less than 275 gm/m2 38 269.250 SQM 998.00 2,68,711.50 INR Two Lakh Sixty Eight Thousand Seven Hundred & Eleven and Paise Fifty Only 37 Steel work in built up tubular trusses including cutting, hoisting ( height upto 10 m)fixing in position and applying a priming coat of approved steel primer, welded and bolted including special shaped washers etc. complete. Electric resistance or induction butt welded tubes.
