W No 58 Different Development Work - 2 Providing & Fixing of Vertical (BEE 5 star rated) Horizontal (BEE 3 star rated) storage water heater with outer casing made of Engineering Plastic sheet (Upto 25 Ltr) Metal rust proof Body (35 & 50 Ltr), Glassline/Titanium Enamel coated Pressure Pump Compatible 8 bar pressure Inner tank, Glass Line Coated mineral filled heating element, stem type, snap action adjustable thermostat, Dual indicating lamps Injected PUF insulation, Multi Function Valve etc. as required held in position with 2/4 no. 10/12 mum anchor Fastener, duly wired with 3 core 2.5/4.0 Sqmm PVC insulated & sheathed copper conductor and 16 A/25A three pin plug top with Portable Residual Current Device PRCD) including making inlet, outlet Flexible alloy connection, testing etc. as required. All as per pre approved by Engineer in-charge. For additional technical parameters of products/work, refer Annexure A attached with this BSR Providing & Fixing of BEE Star rated copper wounded double ball bearing capacitor start, aluminium body & Metallic blade ceiling fan Conforming to all the performance requirements laid down in IS 374:2019 including all amendments, as applicable & Carry BIS licensing (ie ISI marking) with down rod up to 80 cm with secondary support safery cable (steel rope), cotter pin with 3 x 1.5 sq.mm pvc insulated flexible copper conductor making connection testing etc. as required. All as per pre approved by Engineer in-charge. For additional technical parameters of products/work, refer Annexure A attached with this BSR 1200 mm Sweep BEE 1 Star rated (service value>=4.0 to 4.5) Providing & Fixing of energy efficient direct fit (Retrofit) Polycarbonate Glass housing SMD Mid Power LED rube rod (with integral driver & alumn heat sink), on existing fisture, system lumen efficacy≥ 100 lm/Watt output, internal surge protection of 2.5 KV, THD <20% .p.f20.95.CRI 80. life time of minimum 35000 Burning Hours with 70% of intnal Lumen maintaned till life ends, CCT 3000°K/4000°K /5700°K/6000°K/6500°K (As per ANSI Bin), maximum power consumption should not more than the specified rating and Fixture shall be of BIS standard and trade mark certificate (T.C.). Manufactures Word Mark Name Engraved Embossing Screen printing on housing OEM must have its own in house NABL lab setup for all testing facilities for LED fixtures. (LM79 & LM80) certificate Report from OEM shall be submitted. All as per pre approved by Engineer in-charge. For additional technical parameters of products work refer Annexure A attached with this BSR 1200mm, Min. Lumens output 2000 im LED Tube rod with Glass Housing Earth work in excavation in foundation, trenches etc. includingdressing of sides and ramming of bottoms. including getting out theexcavated material, refilling after laying pipe foundation anddisposal of surplus excavated material at a lead upto 50m suitablesite as per direction of Engineer for following depths, below naturalground/Road top level. In all types soils saturated soil such as moorum sand, sandy silt, clay, black cotton soil, kankar, etc. Depth upto 1.5 m Carriage of Materials bymechanical transport including loading unloading and stacking:: Earth For 1 Km Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering All work upto plinth level Code) 1:4:8 (1 Cement: 4 fine coarse sand: 8 graded stone aggregate 40 mm nominal size). Random rubble masonry with hard stone in foundation and plinth Cement mortar 1:6 (1 cement: 6 coarse sand) Random rubble masonry with hard stone in foundation and plinth Extra for random rubble masonry with hard stone in superstructure above plinth level and upto two stories. Cement mortar 1:6 (1 cement: 6 coarse sand) Brick work with FPS bricks of class designation 75 in superstructure above plinth level upto two stories in all shapes and sizes in Cement mortar 1:4 (1 cement: 4 coarse sand) Plastering with cement mortar (1:3) on Brick stone work in substructure super structure at any height complete as per clause 1312 of MoRT&H specification including all material, labour, scaffolding etc. 20 mm plaster on stone work Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring. shuttering, finishing and reinforcement All work upto plinth level 1:1%:3 (1 cement: 1% coarse sand: 3 graded stone aggregate 20 mm nominal size Centring and shuttering with plywood or steel sheet upto two stories (each story of height upto 3.5 metre from floor level) including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc for mass concrete Centring and shuttering upto two stories or height upto 7.5 metre above plinth level including strutting, propping etc and removal of form for Suspended floors, roofs, landings. balconies and access platform, etc. for mass concrete Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15° landings, balconies. helves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto two stories excluding the cost of centring, shuttering, finishing and reinforcement M-20 rade Concrete (1:1%:3 (1 cement 1% coarse sand 3 graded stone aggregate 20 mm nominal size) -As per design mix) Reinforcement for R.C.C. work at all levels including straightening cutting, bending, placing in position and binding all complete Thermo twisted bars Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting. hoisting, fixing in position and applying a priming coat of approved steel primer all complete: Random rubble dry stone Kharanja (soling) under floor. Providing and fixing Granite stone slab mirror polished and machine edge cut in walls, pillars, steps, Shelves. Sills Counters, Floors etc. laid on 12mm (Av.) thick base of cement mortar 1:3 (1 cement: 3 coarse sand) jointing with white cement mortar 1:2 (1white cement 2 marble dust) with pigment to match the shade of the marble slab including grinding, rubbing and polishing completeJhunjhunu / Jalore (Red/Chocolate Colour) Above 3601 Cm2 Slabs Stone work (machine cut edges) for wall lining etc. (veneer) work) backing filled with a grout of 12mm thick cement mortar 1:3 (1 cement: 3 coarse sand) including pointing in white cement mortar 1:2 (1 white cement: 2 stone dust) with an admixture of pigment matching the stone shade: (To be secured to the backing by means of cramps which shall be paid for separately) Red sand stone - Exposed face machine cut and table rubbed with rough backing. 70 mm thick Providing and fixing 16 mm M.S. Fan clamps of standard shape and size in existing R.C.C. slab including cutting chase and making good and painting exposed portion of the clamps complete. Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade Painting with synthetic enamel paint of approved brand and manufacture to give an even shade Two or more coats on new work Providing and fixing on wall face Unplasticised Rigid PVC Single socketed pipes rain water pipes conforming to IS 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion 110mm Diametre Wiring of light point/ fan point/ exhaust fan point/ call bell point as per PWD specification for electrical Works with ISI marked 1.5 sq. mun nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 kV grade (IS:694) and 1.5 sq. mm nominal size FR. PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade (15:694) in recessed ISI marked MMS (15:9537 Р-Ш) vergin material PVC conduit & its all accessories(JB. Bends etc.) round tiles, 18 SWG G.I. box with earth terminal, 6 A switch 3 pin ceiling rose/ Lamp holder/3 point Connector, 3.0 mm thick ISI marked phenolic laminated sheet (IS: 2036-1995). Al. alloy/ cadmium plated iron screws 20 num cup washers etc. all as per pre approved by Engineer in charge, making connections, testing etc. complete as required. For specification of copper Conductor, Phenolic Laminated sheets & Electrical Wiring accessories refer Chapter E 04, E-05 & E07 For additional technical parameters of products work, refer Annexure A attached with this BSR Short point (up to 3 mtr.) Medinum point (up to 6 mtr.) Long point (up to 10 mtr.) Providing & Fixing of energy efficient/energy saving direct fit (Retrofit) composite self ballasted compact fluorscent lamp (CFL) with PF 0.85 in existing holder fixture as required complete in all respect. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work, refer Annexure A attached with this BSR 11/13 Watt Providing & Fixing of Fluorscent tube rod in existing fixtures as required complete in all respect. All as per pre approved by Engineer in charge. For additional technical parameters of products work, refer Annexure A attached with this BSR Flourscent powder coated 18/20 Watts Providing & Fixing of non modular socket size flush type 180 watt rotary minimum 5 step fan regulator as per PWD specification for electrical Works, ISI marked (IS:11037) made out from industrial grade Polycarbonate or fire resistant ABS material including making connection testing etc. as required. All as per pre approved by Engineer in charge. For additional technical parameters of products work refer Annexure A attached with this BSR Supply, Installation, Testing and Comissioning of IS:1475 marked self contained drinking water cooler with hermetically sealed compressor,non CFC refrigerent suitable for operation on 230V/1PH/50Hz AC supply. Full stainless steel (S5304) body (0.8 mm thick) and tank (0.5 mm thick) stainless steel water tray, minimum two nos Brass Chrome plated faucets and suitable drainage system complete in all respect with required height MS fabricated and Painted Angle iron frame (Cost of frame to be paid Extra) complete in all respect of the following capacity. All as per pre approved by Engineer in-charge For additional technical parameters of products/ work, refer Annexure A attached with this BSR cooling capacity 150 Ltr. Hr. and storage capacity 150 Ltrs Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank Supply Installation. Testing and Comissioning of Air Cooled Cassette type Air conditioners complete with Indoor unit(IDU). Out door unit (ODU). R-32/R410A Green Refrigerant, wireless Remote, inbuilt drain pump, suitable for 400/230V, +/-10% 50 Hz,1/3 phase AC supply, apable of performing cooling, dehumidification, Air circulation. filteration & ventilation of following capacity with Scroll /rotary/twin rotary compressor. All as per pre approved by Engineer in-charge. For additional technical parameters of products/ work, refer Annexure A attached with this BSR Inverter Typel 5 TR with ISEER not less then 3.5 (compact 2%2 Earth work in excavation in foundation, trenches etc includingdressing of sides and ramming of bottoms. including getting out theexcavated material, refilling after laying pipe foundation anddisposal of surplus excavated material at a lead upto 50m suitablesite as per direction of Engineer for following depths, below naturalground/Road top level. In all types soils/saturated soil such as moorum. sand, sandy silt, clay, black cotton soil, kankar, etc. Depth upto 1.5 m Carriage of Materials bymechanical transport including loading, unloading and stacking :: Earth For 1 Km Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering All work upto plinth level Code) 1:4:8 (1 Cement: 4 fine coarse sand: 8 graded stone aggregate 40 mum nominal size). Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring. shuttering, finishing and reinforcement All work upto plinth level:1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 20 mm nominal size) Centring and shuttering with plywood or steel sheet upto two stories or height upto 7.5 metre above plinth level including strutting, propping etc. and removal of form for Columns. Pillars. Piers, Abutments, Posts and Struts. Reinforcement for R.C.C. work at all levels including straightening, cutting, bending, placing in position and binding all complete. Thermo twisted bars Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting. hoisting, fixing in position and applying a priming coat of approved steel primer all complete: Providing corrugated G.S. sheet roofing including vertical curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead and including a coat of approved steel primer and rwo coats of approved paint on overlapping of sheets complete upto any pitch in horizontal vertical or curved surfaces) excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.63 mm thick with zinc coating not less than 275gm/m² Painting with synthetic enamel paint of approved brand and manufacture to give an even shade Two or more coats on new work Construction of Tube-well upto 100 Meter depth and above in all type of rocks by DTH system and over burden to accommodate casing pipe of following sizes in all types of soils and over burden including lowering of casing pipes but excluding cost of casing 200 mm dia Nominal bore Providing & lowering of G.I. flange pipe B Class including rubber washer and nuts of 8 mm dia complete in all respect 50 mm dia Supply of ERW M.S. black casing pipe ISI marked (IS: 4270/1992) of grade Fe410 of following nominal bore sizes at site of work 200 mm dia P/Laying ISI marked P.V.C. insulated submersible cable confirming to IS:694 with flexible copper conductor including making connection etc. as required 1.5 Sq.mm 3 core fiat Supply and fixing of tube well cover of M.S. sheet (6mm) thick) with nuts and bolts complete for casing size: 200 mm dia Supply and fixing of M.S. clamp set of 50 6mm flat iron with nuts and bolts etc. for holding the riser pipe assembly of submersible pump set. Providing & Fixing of Single Stage, water cooled, High Speed (2880 RPM), Horizontal, Centrifugal, Openwell Submersible pumps set pre filled with coolent water and fitted with mechanical seal T/C Vs T/C. Thrust bearing shall be of carbon S.S. The stator body of single phase pump shall be of SS and rest of all shall be of cast iron. All casting parts should be cathod electro deposition (CED) coated and other construction material should be confirming to IS: 14220: 2018. The overall performance of pump shall confirm to BEE energy efficiency level of 3 star. Valid BEE certificate from OEM must be submitted for the same. Motor should be IE2 class as per IEC 60034-2-1: 2007, IEC 60034-30: 2008, 1512615:2011, including making connection etc as required complete in all respect. All as per pre approved by Engineer in charge. For additional technical parameters of products/work, refer Annexure A attached with this BSR 3.0 HP, 3-10. (17-27) Mu. (680-3 Supply Installation testing & Commissioning of ISO certified company made DOL/Star-Delta Starter panel made out from 1.6 mm thick powder coated CRCA sheet, enclosure comprising of over load protection relay, short circuit & single phasing protection, Illuminated ON/OFF push butons, ammeter, voltmeter, indicating lamps etc suitable for following rating motors complete in all respect. Appropriate type test certificate / OEM test report shall be submitted. All as per pre approved by Engineer in charge For additional technical parameters of products work, refer Annexure A attached with this BSR 3.0 HP to 10.0 HP ( DOL starter) Providing & Laying of synthetic rope for submersible pump ISI marked (15:5175) of following sizes. complete in all respect. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work refer Annexure A attached with this BSR. 20mm (suitable for 90 mm OD pipe) 32 mm dia HDPE pipe PN 6 (class PE-80) For 2 nos tubewell
