supply installation testing and commissioning Of Equipment For Digital Studio At Patna University, Patna- FURNITURE 1 SITC of a news anchor curvilinear table with overall size 2400x900x800mm. The top of the table is made in 25mm thick prelam particle board and is designed in curvilinear shape. The gable of the table is made in 25mm thick prelam particle board. The table is provided with shelves at the anchor side made in 18mm prelam particle board. The skiriting of the table is made in a combination of 18mm and 25mm prelam particle board curved along the shape of the top to provide an elegant look and design to the table. The modesty of the table is made in 18mm thick prelam particle board. All the visible edges are applied with 2mm thick PVC edge banding applied using edge banding machine. The table is provided with plinth adjusters to prevent any scratches on the floor and to adjust of the level of the table if required. 2 Providing and supplying a high back mesh chair with ergonomic design, comfortable and aesthetically appealing. Seat and Back: The seat is made up of hot pressed 12mm plywood and 40 kg/m3 density polyurethane foam upholstered with fabric. The backrest shall be injection moulded back upholstered with breathable mesh tapestry. Arm Rest: The chair shall be 2D adjustable arm with PU Pad. Mechanism: For comfortable seating, the chair is supplied with synchro tilt mechanism with single point locking. The pneumatic height adjustment for healthy seating that user can adjust upto 100mm. Base & Castors: Dual castors nylon/ABS finish. The pedestal should be five legged nylon pedestal having pitch circle dia 650mm fitted with 5 nos. of twin wheel castors. The castors of the chair should be injection moulded in black 30% glass filled nylon. The chair dimensions are as follows: Overall Height - 1040mm (without headrest) Outer Width - 635mm,Overall Depth - 700mm,Seat Width - 490mm,Seat Depth - 520mm Seat height from ground - 420mm,Back Width - 540mm ,Back height from seat: 560 mm (without headrest). All dimensions have a tolerance of ±10mm. 3 Supply & Installation of Chair SEAT/BACK ASSEMBLY: The seat and back are made up of 1.2 cm thick hot pressed plywood, upholstered with fabric and moulded Polyurethane foam with PVC lipping all around. The back foam is designed with contoured lumbar support for extra comfort. SIZE: 41.0cm. (W) X 46.0cm. (H). POLYURETHANE FOAM: The Polyurethane foam is moulded with density = 45 +/-2 kgs. / M3 and Hardness = 20 +/-2 on Hampden machine at 25% compression. ARMRESTS- The armrest is made of black integral skin polyurethane with 50-70 Shore A hardness and reinforced with MS insert. The P.U. armrest is fixed to black powder coated armrest bracket made of 0.5cm thk. H.R. Steel. PEDESTAL ASSEMBLY: The pedestal is fabricated from 0.2cm. thick CR steel, powder coated and fitted with an injection moulded black Polypropylene hub cap and 5 nos. twin wheel castors.(castor wheel dia. 5.0cm.)The pedestal is 55.0cm. pitch-center dia. (65.0 cm with castors). 4 Supply & Installation of Table Made of MS ERW round tube dia 25.4 x 1.2mm thick with 18 mm thick Pre Laminated top size 1199 X 590 X 735mm with one side three drawer unit made of .5mm thick CRCA sheet mild steel, All steel components have powder coated paint fitted with lock. 5 Providing and supplying a training chair with 18mm thick PLPB writing pad.Seat and Back: The seat and back are made up of hot pressed 12mm plywood and moulded polyurethane foam upholstered with fabric. The backrest is designed with contoured lumbar support which provides support to spine and leaves shoulder free for easy movement. PVC beading is applied around the seat and the back. Arm Rest: The chair shall be supplied with MS arms covered with PU pad. Stand: The chair stand is cantilever shape made up of MS round pipe of dia 25.4mm having thickness 2mm that provides great comfort. An MS shelf is provided at the bottom. All the metal compnents are duly powder coated with epoxy powder coating having thickness 60 microns. PVC shoes are provided at the bottom of the stand to prevent any scratches on the floor. The chair dimensions are as follows: Overall Height: 820mm,Outer Width: 580mm,Overall Depth: 645mm ,Seat Height from ground: 460mm,Seat Width: 490mm,Seat Depth: 460mm,Back height from seat: 390mm,Back Width: 480mm.All dimensions have a tolerance of ±10mm. STUDIO EQUIPMENTS 6 Supply, Installation, Testing and Commissioning of 75 Resolution 3840 x 2160 (4K or Higher), Display Colour 1.07 Billion or Higher, Brightness 450 cd/m2, Viewing Angle ±178° or better viewing angle, Contrast ratio 1200:1, Dynamic Contrast Ratio 30000:1, Response Time Not more than 5 ms, Lifetime 50,000 hours or more, Speakers 2 x 18 Watts or Higher, Touch Technology Keys ower/Homepage/Screen down/Record/Touchlock/Setting, Interface USB3.0 x 3, USB 2.0 : 1, TOUCH : 1, HDMI IN : 2, VGA : 1, AUDIO IN : 1, RS232 : 1, RJ45 IN : 1, EARPHONE : 1 COAX : 1, Smart System(Android) CPU 8 core A55 or better, GPU Quad-core MaliG52 or better, Andoriod version Android 14.0 or Higher (With Playstore), Built-in Software: File manager, Screen mirroring, Chrome, google playstore, Youtube, WPS, Welcome Page, Settings, Calculater, User Manual, Float tool, Side tool bar, Note, Vote, Screen recording.,Wireless Content sharing, text recognition. 4 Application split screen,screen recording,screen capture, Wireless File sharing form mobile phones.U disk lock screen,USB port Block,Multi-user management. White Board Feature Menubar includes new whiteboard, storage, sharing, closing, and setting functions,Page management,Painting brush-preset 9 monocolors and 2 gradient,Thickness: preset 6 brush sizes,support ordinary brush, marker, pen three brush styles, as well as text recognition brush andgraphicsrecognition brush two intelligent brush, eraser,Table, Timer, Voting, Withdrawal and redo, Single point / multi point,Mini whiteboard: QR code: Scan the QR code in the web link.for to use the mobile terminal to scan the annotation content (picture format). Inbuilt WIFi Dual WIFI (5G & 2.4G ) 802.11ac/b/g/n/a,Hotspot or better, Bluetooth BT5.0 or better, RAM 4 GB or Higher, ROM 32 GB or Higher, Certification BIS (Indian), CE, FCC & ROHS certification. 7 Supply, Installation, Testing and Commissioning of Interactive display must have 80 Pin OPS slot, Processor It should have Intel i5 processor or higher with Licensed Windows 11 IOT GAC OS. 10th generation or higher, RAM It should have RAM of 8GB, ROM / Storage memory It should have memory storage of 256GB SSD or higher, Interface It should have USB2.0 x 2 ports,USB3.0x 4 ports,DP outx1 port,HDMI out x1 port. Network It should have RJ45 LAN port x 1,WiFi It should have inbuilt WiFi with two antennas. Bluetooth It should have Bluetooth version 4.0 or above, Audio ports It should have 3.5mm with Mic/Line-inx1 port,Line-out 3.5mmx 1 port. 8 SITC of Teacher focusing camera, must have a 1/2.8-inch CMOS sensor with 8.42 megapixels and a 12x optical zoom lens (f3.47mm-41.65mm, F1.84-F3.72). The horizontal field of view should be 66° or better. It must support YUY2 (Max 1080P30), MJPEG (2160P30), and H.264 A/C (Max 2160P30). The signal system should include 4KP30, 4KP25, 1080P30, and 1080P25, with a progressive scanning mode. Digital zoom must be 16x. Minimum illumination should be 0.5Lux (F1.8, AGC ON), and shutter speed must range from 1/30s to 1/10000s. White balance should support auto indoor, outdoor, one-push, and manual VAR. It must have 2D and 3D digital noise reduction with an SNR of >55dB. The pan angle should be 170°, and the tilt angle must range from -30° to 90°. Image flip must be supported, with 255 present positions. Video compression should support H.264/MJPEG with dual-stream. It must have protocols like NDI (optional), TCP/IP, HTTP, RTSP, RTMP(s), Onvif, DHCP, SRT, GB/T28181, and Multicast. The camera should include 1x USB 3.0 Type-C, 1x HDMI 1.4, and 1x RJ45 (10M/100M/1000M adaptive Ethernet). The audio interface must have 1x LINE IN 3.5mm jack. The control interface should support 1x RJ485 IN (optional 2-pin Phoenix, 1200m max) and 1x RS232 IN (BPIN mini DIN, 30m max). Control protocols must include VISCA, Pelco-D, and Pelco-P. The power interface should be JETA Type (DC N 12V). The camera must include an IR remote control and have BIS, CE, FCC, RoHS, and CB certifications. Approved Make: Lumens/Sony/PeopleLink 9 SITC of Student focusing camera, must have a 1/2.8-inch CMOS sensor with 8.42 megapixels and a 20x optical zoom lens (f3.47mm-41.65mm, F1.84-F3.72). The horizontal field of view should be 66° or better. It must support YUY2 (Max 1080P30), MJPEG (2160P30), and H.264 A/C (Max 2160P30). The signal system should include 4KP30, 4KP25, 1080P30, and 1080P25, with a progressive scanning mode. Digital zoom must be 16x. Minimum illumination should be 0.5Lux (F1.8, AGC ON), and shutter speed must range from 1/30s to 1/10000s. White balance should support auto indoor, outdoor, one-push, and manual VAR. It must have 2D and 3D digital noise reduction with an SNR of >55dB. The pan angle should be 170°, and the tilt angle must range from -30° to 90°. Image flip must be supported, with 255 present positions.Video compression should support H.264/MJPEG with dual-stream. It must have protocols like NDI (optional), TCP/IP, HTTP, RTSP, RTMP(s), Onvif, DHCP, SRT, GB/T28181, and Multicast. The camera should include 1x USB 3.0 Type-C, 1x HDMI 1.4, and 1x RJ45 (10M/100M/1000M adaptive Ethernet). The audio interface must have 1x LINE IN 3.5mm jack. The control interface should support 1x RJ485 IN (optional 2-pin Phoenix, 1200m max) and 1x RS232 IN (BPIN mini DIN, 30m max). Control protocols must include VISCA, Pelco-D, and Pelco-P. The power interface should be JETA Type (DC N 12V). The camera must include an IR remote control and have BIS, CE, FCC, RoHS, and CB certifications. 10 SITC of Camera Control System: Light Weight tripod wih 5 KG Payload ,Head - Dual-head for both 75mm ball diameter and flat base tripods. Mountable on sliders, skater dollies, and other equipment. Payload - 5kg,Tilt angle - +90 Deg to -80 Deg,Pan angle – 360 Deg,Max Height - H : 1615 mm W : 835 mm, Low height H : 715 mm W : 620 mm,Counterbalance – Fix , Drag Mode – Fix,Head Base - Ball 75 mm / Flat base with 3/8female thread,Section – 2 Stage,Tripod Fixation – Fixing lock knob,Spreader - Mid—level spreader (Telescopic) ,Case material - Nylon. Polyester 11 SITC of Commercial Series Mixer/Amplifier,robust, fanless, 1U mixer-amplifier ideal for commercial installations ,With 8 inputs, dual 120 W outputs, flexible routing, VOX/priority features, and remote volume support, 120W into 8 or 4 Ohm Loads,15W Per Channel,8 Input Channels, 2 Output Channel Usable with 70 & 100V Systems,Euroblock Mic/Line & RCA Inputs,Hi-Z & 27V Phantom Power Switches Sleep Mode & 2 Auxiliary Outputs,Voice Activated Ducking & Priority Mute 12 SITC of 5.25 Woven-Fiberglass LF Drivers,0.75 PEI Diaphragm Tweeters,200W RMS at 8 Ohms,Durable, Weatherized Enclosures,InvisiBall Mounting Hardware,Zinc-Plated Grilles,Good for Off-Axis Listening 60 Hz to 20 kHz Frequency Response 13 SITC of Wireless Lapel Mic ,UHF ranges: Band A: 548–572 MHz (other bands also supported),8 frequency banks × 12 preset channels = up to 96 selectable channels,Wide-band FM modulation; switching bandwidth ~24 MHz 14 SITC of Wireless handheld Mic ,UHF ranges: Band A: 548–572 MHz (other bands also supported) 8 frequency ,banks × 12 preset channels = up to 96 selectable channels ,Wide-band FM modulation; switching bandwidth ~24 MHz 15 SITC of Professional Headphone,Driver Size: 40 mm dynamic drivers ,Frequency Response: 16 Hz – 20 kHz ,Impedance: 32 Ω ,Sensitivity: 112 dB SPL/V @ 1 kHz ,Maximum Input Power: 200 mW 16 SITC of 5-CH NDI Streaming Switcher (c/w 1x 1TB SSD),5-CH (1x 3G/HD/SD-SDI, 4x HDMI 1.4 (input seetable s SDI/HDMI), 1x USB 3.0) Streaming Switcher, Audio delay calibrat ion (each channel up to 3000ms), bulit-n 1x HDMI Mut i-view monitoring output, Support PiP on PGM, Logo insert ion, MP4,Reco r d i ng fi l e fo r mat FAT, NTFS, exFAT),Streaming Protoco l: DHCP Client, TS over UDP (unicast & mut icast), RTSP over HTTP/TCP/UDP, RTMP (Publish)/RTMPS,HLS, SRT Caer & Listener, Web RTC (encode/decode), NDI/Hx. 2x XLR Balanced audio, 1 pair x RCA Unbalanced Audio, SD/HDMI embedded audio,IP Audo (RTSP AAC-ADTS, PCM) External & embedded audio mixable. 17 Providing and Installation of round MS (Tube size 50 mm Dia) Studio Lighting grid Horizontal x 2 Bars made up of MS 40NB black powder coated pipe 18 Providing and Installation of Led Panel Light 100W Led Panel Light 100W,LED Lamp Source SMD,30 and 60 degree Lens,Product Size: 13.2x9x4inch approx,Digital Display Screen 50,000hr LED Light,DMX 512,CRI - 95+,Beam - 30°-60° Angle 19 Supply and Installation of 55 LED 4K TV with 3840 X 2160 resolution or better, Quantum Processor life, PQI 2200 or higher, HDR, with HDR10+ Support, HGL ,Having contrast 4000:1 or higher, Dynamic Crystal Color, UHD Dimming, LED clear Motion, , viewing angle 178/178, Dolby Decorder MS12 2 CH, OTS Lite, WIFI enabled, HDMI 3 Port , USB 2 Port. 20 Supply & Installation of Desktop Intel Core i9-12900K Processor 16 Core or better Memory - 32GB, M.2 PCIe 512GB NVMe M.2,HDD Enterprise 3.5 SATA 6Gb/s 4TB HDD, 7200rpm,GPU Nvidia RTX 3060 8GB GDDR5 GPU Card,OS Windows 11 Professional 64 bit OEM, Monitor & K/M 24” Monitor (1920 x 1080) and USB Keyboard & Mouse, 30 Mins Backup Offline UPS , Antivirus installed for 3 Years. Editing Software - Da Vinci 21 Supplying, Installatation, Testing & Commissioning of 2 TR Cassate Ac fitted with single Rotary Compressor (Cooling Only) with cordless remote control including installation of Make -Daiken/Carrier/Voltas all complete job as per direction of EI 22 Supplying, Installing, Testing, Commissioning of Refregent pipe 5/8 and 1/4 copper tube with nytral rubber tube insulated as per direction of E/I all complete job. 23 Supplying & fitting of drain with PVC rigid including req fitting and support as per direction of E/I all complete job.
