Tender For Repair/ Replacement Of Steel Windows, Ventilators, Doors And Cement Plaster In Domestic Area At Afs Kumbhirgram
Tender Value
9.50 Lakhs
Estimated cost
Bid Submission
02 Aug 2025
0 days left
EMD
19000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
kumbhirgram → Assam
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Repair/ Replacement Of Steel Windows, Ventilators, Doors And Cement Plaster In Domestic Area At Afs Kumbhirgram
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 26-Jul-2025 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 02-Aug-2025 |
BOQ
| Sl. No. | Item Description |
| 1 | Taking down chowkats or frame with shutters (without taking off shutters from the frames )exc. 1.5 sqm but n.exc. 4 sqm each complete all as specified and directed. |
| 2 | Taking down chowkats or frame with shutters (without taking off shutters from the frames ) n.exc. 1.5 sqm each complete all as specified and directed. |
| 3 | Refix in same opening shutters of any description exc 1 sq. m and n exc 2 sqm each |
| 4 | Material and labour 2nd class Hard wood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified and directed. |
| 5 | Material and labour For Pressed steel frames of size 125 x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete all as specified and as directed. |
| 6 | Material and labour for PCC 1:3:6 Type C-0, (using 12.5 mm graded crushed stone aggregate) as in roof kerbs, slightly rounded or chamfered on edges, cills, seismic and other similar bands, holdfast PCC bed, filling of hollow PS Door frame and the like complete all as specified and directed. |
| 7 | Supply and fixwall ties, hold fasts hooks for hanging fans, boarding, wind tie,purlins and iron grill for window etc and similar small articles conforming to Fe.290, Gde-E-250. |
| 8 | Supply and fix solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS wire tube supplied and fixed in opening as per specification and drawing. |
| 9 | Material and labour for 35 mm thk factory made plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed. |
| 10 | Supply and fix for 30 mm thk flush shutters, solid core construction, with particle board core and plywood face panels, one face is covered with decorative face veneer with lipping/frame to match complete all as specified and directed. |
| 11 | Material and labour 30 mm thick 2nd class H/W Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc. including finished surface with plaster and paintings; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed. |
| 12 | Supply and fix facory made solidpanelled PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rail MS frame shall be covered with heat moulded plain colour PVC\"s channel having PVC sheet trip of 20mm wide stuck inside with solvent cement for styles and plain colour PVC sheets for top rail lock rail and bottom rail on either side and as gap for top rail and bottom rail panelling of plain colour PVC sheetto be fitted to the styles and rails with suitable PVC sheet beading and jointed to gether with solvent cement supplying and fixing in the frame including butt hingesand plaster the surface and painting etc at site as per specification and drawing. |
| 13 | Supply and fix Mild steel butt hinges medium weight , clod rolled,100mm, ISI marked, complete all as specified and directed. |
| 14 | Supply and fix 300mm long aluminium alloyanodised sliding door bolts with hasp stapple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sectionsor cast aluminium alloy complete all as specified and as directed |
| 15 | Supply and fix 200 mm long Aluminium anodised barrel tower bolt 12mm dia of extruded section (Conforming to IS) |
| 16 | Supply and fix 150 mm in size aluminium handles, cast type, anodised complete all as specified and directed. |
| 17 | Supply and fix of 150mm long floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor including vulcanised rubber piece, complete all as specified and directed. |
| 18 | Supply and fix Mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete |
| 19 | Supply and fix in repair Steel windows with side hung shutters including projecting type hinges with 3 mm thick 100 mm long copper oxidised finish MS handles and 3 mm thick 300 mm long MS steel copper oxidised finish peg stay, complete with glazing bars, dovetailed or welded with applying one shop coat of red oxide zinc chromate primer before fixing including taking down old unserviceable steel windows from existing position ad making good disturbed surfaces of walls etc in all respect as per existing specification all complete asspecified and directed. |
| 20 | Ditto as per item No 19 but with out glazing bars all as specified and directed. |
| 21 | S &F for framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars; barred iron doors ladders framed balusters walk ways, railings, framework of water tanks and similar work conforming to Fe.290.Gde-E-165 |
| 22 | Supply and fix in repair steel ventilator with top hung shutter including projecting type hinges, 3mm thick 100mm long copper oxidesed finish mild steel handle and 3mm thick 300mm long mild steel copper oxidesed finish peg stay with applying one shop coat of red oxide zinc chromate pimer before fixing including taking down old unserviceable steel ventilators form existing position and making good disturbed surfaces of walls etc in all respect as per existing specifications all complete as specified and as directed. |
| 23 | Supply and fixed galvanized mild steel wire cloth 0.56mm fixed nominal dai of wire and avrg widh of aperature 1.18mm and fixed with tinned tacks or galvanised wire staplecomplete all as specified and directed. |
| 24 | Supply and fix 3mm thick Sheet glass, ordinaly quality and glazing with oil putty or secured with wdn beads as required in square n exc 0.5 sqm in each pane |
| 25 | Supply and fix 4mm thick Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane complete all as specified and directed. |
| 26 | Material and labour two coats of synthetic enamel paint over a coat of pink primer to new wooden surface of any description, not otherwise descri-bed, over 10cm width or girthas directed. |
| 27 | Material and labour two coats of synthetic enamel paint over a coat of red oxide primer toto new steel surface over 10cm in width or girth,not otherwise described as directed. |
| 28 | Taking down cement plaster on brick walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed. |
| 29 | Material and labour for rendering 15 mm thickon fair faces of brick work or concrete surface in CM (1:4),and finishing surface even and smooth fair without using extra cement, with integral water proofing compound( Water proofing compound is used in only exterior 5mm plaster and used as per manufacturer instructions). |
| 30 | Supply only LW + confirming to relavent IS MAKE : Dr. Fixit of M/s PIDILITE INDSTURIES or equivalent all as specified and as directed. |
| 31 | Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade all as specified and as directed. (Company Depot Tinted) with silicon additives@ 1.43 litre/ 10 sqm over and including primingcoat of exterior primer applied @ 0.90 litre/ 10sqm over new surfaces. |
AI Tender Summary
Tender Timeline
Jul 26, 2025
11:30 IST
Tender Published
Tender notice published.
Completed
Aug 02, 2025
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
CompletedAug 02, 2025
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedAug 04, 2025
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender