Tender For Improvement Of Chenani Champari Road By Way Of Laying Of Wmm, Bm And Ogpc, Length -1.50 Kms In Km 1St To 3Rd Under City And Towns For The Year 2025-26.
Tender Value
22 Lakhs
Estimated cost
Bid Submission
17 Jul 2025
0 days left
EMD
44000
Bank guarantee accepted
Document Fee
600
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
chenani → Jammu And Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Improvement Of Chenani Champari Road By Way Of Laying Of Wmm, Bm And Ogpc, Length -1.50 Kms In Km 1St To 3Rd Under City And Towns For The Year 2025-26. Refer To Boq
BOQ
| Sl. No. | Item Description |
| 1 | Scarifying the existing bituminous road surface to a depth of 50mm and disposal of scarified material within all lifts and lead upto 1 km (by mechanical means). |
| 2 | Providing, laying, spreading and compacting graded stone aggregate (Size range 53 mm to 0.075 mm)to wet mix macadam (WMM) specification including premixing the material with water at OMCin mechanical mix plant, carriage of mixed material by tipper at site, for all lead and lift , laying in uniform layers with mechanical paver finisher in sub-base/base course on well prepared surface and compacting with vibratory roller of 8 to 10 tonne capacity to achieve the desired density, complete as per specifications and direction of Engineer-in-charge.(WMM is also laid in stretches) |
| 3 | Providing and applying tack coat using hot straight run bitumen of grade – VG-10, including heating the bitumen, spraying the bitumen with mechanically operated spray unit fitted on bitumen boiler, cleaning and preparing the existing road surface as per specifications On WBM surface @ 0.75 Kg/sqm. |
| 4 | Providing and laying bituminous macadam using crushed stone aggregates of specified grading premixed with bituminous binder, transported to site by tippers, laid over a previously prepared surface with paver finisher equipped with electronic sensor to the required grade, level and alignment and rolling with smooth wheeled, vibratory and tandem rollers as per specifications to achieve the desired compaction and density, complete as per specifications and directions of Engineer-in-Charge 50 to 100 mm average compacted thickness with bitumen of grade VG-30 @ 3.5% (percentage by weight of total mix) prepared in Drum Type Hot Mix Plant of 60-90 TPH capacity |
| 5 | 2.5 cm premix carpet surfacing with 2.25cum and 1.12 cum of stone chippings of 13.2 mm and 11.2mm size respectively per 100 sqm and 52 kg and 56 kg of hot bitumen per cum of stone chippings of 13.2 mm and 11.2 mm size respectively including a tack coat with hot straight run bitumen including consolidation with road roller of 6 to 9 tonne capacity etc. complete (tack coat to be paid for separately) With paving Asphalt grade VG-30 with no solvent |
| 6 | Providing and laying seal coat of premixed fine aggregate (passing 2.36 mm and retained on 180 micron sieve) with bitumen using 128 kg of bitumen of grade VG-10 bitumen per cum of fine aggregate and 0.60 cum of fine aggregate per 100 sqm of road surface including rolling and finishing with road all complete. |
| 7 | Carriage of materials by MT including loading/unloading and stacking complete Sand avg lead 100 km |
| 8 | Carriage of materials by MT including loading/unloading and stacking complete Stone Agg below 40 mm nominal size avg lead 10 km |
AI Tender Summary
Tender Timeline
Jul 12, 2025
11:30 IST
Tender Published
Tender notice published.
CompletedJul 17, 2025
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJul 18, 2025
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender