Tender For Construction Work Of Additional Room And Toilet In Block Lambhua Campus
Tender Value
15 Lakhs
Estimated cost
Bid Submission
17 Jul 2025
0 days left
EMD
30000
Bank guarantee accepted
Document Fee
3540
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
lambhua → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction work of additional room and toilet in Block Lambhua Campus
BOQ
| Sl. No. | Item Description |
| 1 | Excavation in foundations in ordinary soil i/c 1.5mtr lift and lead upto 30mtr and i/c filling watering and ramming of excavated earth into the space between the building and the sides of foundation trenches or into plinth and removeland disposel of surplus earth as directed by the engineer incharge upto a distance of 30mtr from the foundation trenches asper |
| 2 | Concrete with 4cm gauge brick ballast, sand of 1.25 F.M. and cement in proportion 8:4:1 in foundations and under floors including supply of all materials labour and tools and plants etc. required for proper complation of the work. |
| 3 | R.C.C. Work with cement approved coarse sand and 2cm gauge stone girt (Dala) in the propotion of 1:1.5:3 (M-20) in Column Footing excluding supply of reinforcement and its bending but including fixing and bending the same with 24 B.W.G.G.I. banding wire and including necessary centering and shuttring etc. & also including supply of all materilas, labour and T&P etc. required for proper completion of work. As per DSR |
| 4 | R.C.C. Work with cement approved coarse sand and 20 mm gauge (nomianl size) dalla stone aggregate in the proporation of 1:1.5:3 M-20 in R.C.C. Column excluding supply of reinforcement and its bending but including its fixing and binding the same with 24 B W.G.G.I. binding wire and as required supply of all materials, labour centering and shuttering and removal of the same after completion of work in plinth and column |
| 5 | Brick work in 1:6 cement and Coarse sand of in foundation and plinth including supply of all material, labour tools and plants. etc. required for proper completion of work |
| 6 | Earth Work in cutting or embankment in ordinary soil including cartage of earth from 2 Km. distance |
| 7 | Brick work in 1:6 cement and COARSE sand in super structure one brick thick wall including supply of all material, labour tools and plants, etc. required for proper completion of work |
| 8 | Brick work in 1:4 cement and Fine sand in super structure one brick thick wall including supply of all material, labour tools and plants. etc. required for proper completion of work |
| 9 | RCC work with cement C sand and 20 mm Stone grit in 1:1.5:3 in Lintel, Beam, and Slab |
| 10 | Centering and shuttering including strutting propping etc. and removal of form work for Lintel, Beam, Slab etc |
| 11 | Centering and shuttering including strutting propping etc. and removal of form work for Column etc |
| 12 | Mild steel or iron in plain work such as in reinforced concrete work 6 to required shape as necessary including dending for proper |
| 13 | M.S Iron work of small size and section such as hinging down bolts hold fast tie rods gratings etc from including supply of steel and its wastage including cost of bolts nuts if required and welding grinding and making holes as required for proper completion of work |
| 14 | 12 mm. thick plaster in 1:4 cement and F sand. Over plain surface including supply of all materials, labours and T&P etc. required for proper completion of work (EXTERNAL) |
| 15 | 12 mm, thick plaster in 1.6 cement and F sand. Over rough surface including supply of ell materials, labours and TAP etc. required for proper completion of work (INTERNAL) |
| 16 | Supply and fixing commerical quality stapur ply or other approved plywood flush shutter |
| 17 | Provide and applying white cement based putty of average thickness fmm of approved brand and manufacturer, over the plaster wall surface to prpare the surface even and smooth a per PWD specification scheduled item no. 660 of Faljabed |
| 18 | Finishing wall with premium acrylic smooth exterior paint with silicon additives or required shade, new work two or more cont applied @ 1.67 1tr/ 10 sqm over and priming coat as per PWD specification scheduled item no. 13.46.1 |
| 19 | Providing and laying vitrified tiles in different sizes thickness to be specified by manufacturer with water absorption less than 0.08% and conforming to I.S 15622 of approved make in all colors and shades laid on 20mm thick cement mortar 1:3 (1 cement:3 coarse sand jointing with grey cement slurry 3.3kg/sqm including grouting the joints with white cement and matching |
| 20 | Suplly and fixing of 6 mm china white glazed tiles in dado in 1:3 c/s mortar I/C all material, Labour & T&P etc. (S1-628) |
| 21 | Painting or vamishing new iron work in small area in wood with one coat of ready mixed priming paint and one coat approved superior qualilty ready mixed paint including supply of |
| 22 | providing&fixing false ceiling at all height with 6 to 8mm thick calcium Silicate board i/c all |
| 23 | Wiring point for light in PVC Conduit with 1.5 Sqm. FR PVC Insulated Multistarand copper conductor cable as earth wire drawn inside the conduit. SI No. 131 |
| 24 | Wiring point for Fan/ Fresh air Fan in PVC Conduit with 1.5 Sqm. FR PVC Insulated Multistarand copper conductor cable as earth wire drawn inside the conduit. SI No. 133 |
| 25 | S/F of power plug with 15 A/ 250 V Flush type switch & 5 pin 15 A/250 V Flush type universal socket. SI No. 1139 |
| 26 | 5/F Hexagonal Fan Box. As Sl No. 1149. |
| 27 | S/F of Switch Box of 16 SWG dully Painted with red oxide primer and flushed with wall.1203 |
| 28 | S/F of batten/angle holder complete. SI No. 405 |
| 29 | 5/Fsuface/flush mounting 4 ways SPN distribution Board ( Legrand lexic) With additional metal door with out MCB Complete in Lall Respect St No 1022 h |
| 30 | S/F of 15 watt led light |
| 31 | S/F OF FAN |
| 32 | Supply and fixing of fire extinguisher ABC Type 6.00 Kg Capacity (ISI marked IS: 15683 & TAC approved) complete with initial charge and wall bracket Along |
| 33 | Supply and fixing of fire extinguisher CO2 Type 4.50 Kg Capacity (ISI marked IS: 2878 & TAC approved) complete with initial charge and |
| 34 | Supply and fixing of fire bucket round bottom made of Gl sheet 9-11 liters capacity duly painted as per fire brigade designe approved on |
| 35 | Provide and fixing of 15mm diaCPVC ISI marked compliete |
| 36 | S/F of 15mm dia brass Bib/angle cock heavy quality 15mm dia (400gms) ISI marked as in S.1. 237 |
| 37 | S/F of 15mm dia brass stop cock heavy quality 15mm dia (400gms) ISI marked as in S.1. 237 |
| 38 | Provide and fixing of first quality white glased Orissa pattern WC pan Hindustan, Cera make Chp.-22 |
| 39 | Provide and fixing 550x400 mm Hand wash basin of white glased earthen ware of first quality Hindustan, Cera make complete work |
| 40 | S/F of PVC pipe 110 mm dia. i/call etc. |
| 41 | S/F of PVC pipe 75 mm dia. i/c all etc. |
| 42 | P/F of lower level cestern 10ltrs capacity with all fitting |
| 43 | P/F of 110 mm dia. Cl Jali completed |
| 44 | P/F of PVC one peace mould water tank |
| 45 | P/F of Gl elbow 15 mm dia. |
| 46 | P/F of Gl socket 15 mm dia. |
| 47 | s/f of display board |
AI Tender Summary
Tender Timeline
Jul 12, 2025
11:30 IST
Tender Published
Tender notice published.
CompletedJul 17, 2025
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJul 17, 2025
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender