Tender For Annual Maintenance Of Ei Works For Belonia Sub Divisional Hospital Belonia South Tripura For The Year 2024 25, belonia-Tripura

Annual Maintenance Of Ei Works For Belonia Sub Divisional Hospital Belonia South Tripura For The Year 2024 25 - 1 Wiring for light / fan / exhaust fan / call bell point with 2 x1.5 sq. mm pvc insulated Copper conductor cable (FR) in pvc casing and capping complete with wooden switch board with bakelite cover and piano type switch including connection etc as required:- 2 Short point:- 3 Medium point:- 4 Long point:- 5 Providing and fixing of 3 pin 5/6 amps plug point withpianotype 5/6ampsswitch andsocketincludingconnectionwith 2x1.5 sq. mm PVC insulated Copper conductor cable (FR) onswitch board, earthing the 3rd pin etc. as required:- 6 Providing and fixing of 3/6 pin15/16 amps plug point withpianotype 15/16ampsswitch andsocketincludingconnectionwith 2x2.5 sq. mm PVC insulated Copper conductor cable (FR) onswitch board, earthing the 3rd pin etc. as required:- 7 Wiring for circuit /Sub-main with following sizes PVC insulated copper conductor cable (FR) in PVC casing and capping etc. as required. 8 2 x 1.5 sq.mm:- 9 2 x 2.5 sq.mm:- 10 2 x 4 sq.mm:- 11 2 x 6 sq.mm:- 12 2 x 10 sq.mm:- 13 Wiring for Circuit/Sub-main with the following sizes of PVC insulated Copper conductor cable (FR) in existing PVC casing capping/ conduit in recess/ surface including connection etc. as required. 14 1 x 1.5 sq.mm:- 15 2 x 1.5 sq.mm:- 16 2 x 2.5 sq.mm:- 17 2 x 4 sq.mm:- 18 2 x 6 sq.mm:- 19 4 x 10 sq.mm:- 20 4 x 16 sq.mm:- 21 Supplying and drawing 2.5 sq. mm Copper conductor wire along with other wire for loop earthing including connection etc. as required. 22 Installation, testing and commissioning of ceiling fan including wiring the down rod of standard length (up to 30 cm) by 2 x 1.5 Sq.mm PVC insulated copper conductor cable(FR) etc as required. 23 Supplying & fixing of 1200 mm sweep white color AC ceilingfan capacitor typedouble ball bearing complete with 300 mm down rod,canopies,shackles, 3nos blades, including wiring the down rod with 2x1.5 sqmm PVC insulated Copper conductor cable(FR)(ISI marked, BEE 1star/minimum service value 4.0 m3/min/W) : 24 Supplying & installation of 400 mm sweep AC padestal fan with plastic blade including connection etc as required:- 25 Supplying & installation of 400 mm sweep AC wall mounting fan with metal blade including connection etc as required:- 26 Supplying & installation of 300 mm sweep metalic body exhaust fan including connection etc as required: 27 Supplying & installation of TP/FP MCCB of following ratings in the existing MCCB enclosure/ panel board including connection etc as required (Ics=100% of Icu with adjustable settings):- 28 16 to 100 amps FP MCCB, Breakingcapacity 16/18KA (Thermal Magnetic):- 29 200 amps FP MCCB, Breakingcapacity 36KA (Thermal Magnetic) :- 30 Supplying & installation of 400 mm sweep AC wall mounting fan with plastic blade including connection etc as required:- 31 Supplying and fixing of the following PVC casing capping with all accessories etc. as required. 32 20mm x 12mm 33 25mm x 12mm 34 38mm x 16mm 35 Supplying and fixing of the following electrical accessories including necessary connection etc. as required. 36 5/6 amps piano type switch 37 16/20 amps piano type switch 38 3 pin 5/6 amps piano type socket 39 3/6 pin 16/20 amps piano type socket 40 Angle/batten holder 41 Ceiling rose 42 2.5 mfd fan capacitor 43 5 amps power top:- 44 15 amps power top:- 45 32 amps DP kit kat switch:- 46 Electronic 5 step fan regulator 47 Ding dong call bell 48 Supplying and fixing of the following sizes wooden switch boards with 3mm thick bakelite cover etc. as required. 49 102mm x 102mm (4 X 4) :- 50 152mm x 203mm (6 X 8) :- 51 203mm x 254mm (8 X 10) :- 52 254mm x 300mm (10 X 12) :- 53 Supplying and fixing of the following sizes PVC switch boards with cover etc. as required. 54 75mm x 75mm (3 X 3) :- 55 102mm x 102mm (4 X 4) 56 152mm x 203mm (6 X 8) :- 57 203mm x 254mm (8 X 10) :- 58 Supplying and fixing of the following sizes GI (in recess) and plastic (on surface) modular switch boards etc. as required. 59 4 module plastic switch board:- 60 6 module plastic switch board:- 61 8 module plastic switch board:- 62 12 module plastic switch board:- 63 Supplying and fixing of the following sizes modular type cover plates for GI/plastic modular switch boards etc. as required. 64 6 module :- 65 8 module :- 66 12 module :- 67 Supplying and fixing of the following modular accessories including necessary connection etc. as required. 68 6/10 amps one way SP switch (1M) :- 69 16/20 amps one way SP switch (1M) :- 70 23 pin 6/10 amps socket outlet (2M):- 71 3/6 pin 16/20 amps socket outlet (2M):- 72 5 step fan regulator (2M):- 73 32 amps one way DP switch (2M):- 74 Supplying and installation of industrial plug & socket complete with metal enclosure including necessary connection etc. as required of the following ratings (without MCB):- 75 20 amps 230/240 volts single phase suitable for SP/SPN/DP MCB:- 76 Supplying and fixing of the following sizes PVC conduit (medium gauge) on surface with all accessories etc. as required. 77 19/20 mm dia 78 25 mmdia 79 Supplying and fixing of following surface/recess mounted LED luminaries in powder coated die cast housing complete with high efficiency polycarbonate diffuser and necessary connection etc.as required (with 50000 burning hours and minimum lumen output of 100 lm/watt):- 80 Surface mounted integrated 10 watt LED batten with polycarbonate diffuser:- 81 Recessed/Surface mounted 1ft x 1ft decorative 16/18 watt LED panel light with integral driver and high quality polycarbonate diffuser:- 82 Recessed round/Square shaped 12 watt LED downlight with integral driver and high quality polycarbonate diffuser:- 83 Supplying and fixing of following outdoor LED luminaries in powder coated die cast housing complete with heat resistant tempered glass/diffuser including necessary connection etc. as required (50000 burning hours and minimum lumen output of 100 lm/watt):- 84 45 watt LED street light fixture with integral driver and secondary lens (IP 66):- 85 Supplying and fixing of following LED Tubes, retrofit bulbs/lamps for LED luminaries including necessary connection etc. as required:- 86 9 watt LED retrofit lamp with polycarbonate body and aluminium heatsink :- 87 Supplying and laying of the following sizes XLPE insulated PVC sheathed aluminium conductor armoured cable with necessary connection etc as required 88 3 core 4 Sq mm 89 Supplying & fixing of G.I. pipe (medium gauge) bracket fabricated at suitable angle for fixing of outdoor light on wall/ RCC base with necessary MS clamp, nut, bolt etc as required:- 90 250mm dia 91 Supplying and fixing of MS frame made of (25mm x 25mm x 5mm) MS angle with necessary support by (40mm x 6mm) MS flat and 12 mm thick marine plywood on top, grouted on wall with 4 noslegs (25mmx25mmx5mm MS angle20 cm long) finishedwith red oxide and 2 coat synthetic enamel paintincluding necessary cc work, mending the damages & painting etc as required:- 92 Supplying and installation of Bus bar chamber of the following ratings and sizes made of steel sheet enclosure with all accessories including necessary connection etc. as required:- 93 32 amps 415 volts four strip Copper busbar chamber 4 ways of size (300mmx240mmx80mm):- 94 63 amps 415 volts four strip Copper busbar chamber 4 ways of size (330mmx280mmx100mm):- 95 100 amps 415 volts four strip Copper busbar chamber 4 ways of size (455mmx330mmx120mm):- 96 Supplying and installation of Switch disconnector fuse unit (main switch) of the following ratings with all accessories including necessary connection etc. as required:- 97 32 amps 415 volts TPN main switch (rewireable):- 98 63 amps 415 volts TPN main switch (rewireable):- 99 100 amps 415 volts TPN main switch (rewireable):- 100 200 amps415 volts TPN main switch (rewireable):- 101 Supplying and installation of fuse unit kitkat/HRC/HBC of the following ratings in existing main switch/panel board including necessary connection etc as required:- 102 63 amps kitkat porcelain fuse unit with base(rewireable):- 103 100 amps kitkat porcelain fuse unit with base(rewireable):- 104 200/250 amps kitkat porcelain fuse unit with base(rewireable):- 105 Supplying and installation of change over switch of following ratings with enclosure including necessary connection etc. as required:- 106 63 amps FP on load change over switch (Front handle with enclosure):- 107 Supplying and installation of powder coated steel sheet enclosure (MCB DB) suitable for 240/ 415 volts MCB/ Isolator/ RCCB (SP/SPN/DP/TP/TPN/FP) complete with necessary bus bar, neutral link, din rail, earth bar etc i/c connectionas required. 108 2 way SPN MCB DB (single door):- 109 (2+4) / 6way SPN MCB DB (single door):- 110 (2+6) / 8way SPN MCB DB (single door):- 111 (2+10) / 12way SPN MCB DB (single door):- 112 Supplying & installation of isolators of following ratings in the existing MCB DB including connection etc as required:- 113 40 amps DP isolator:- 114 Supplying & installation of 10 KA breaking capacity, B/C curve MCB of following ratings in the existing MCB DB including connectionas required:- 115 6 to 32 amps SP MCB:- 116 Supplying and laying of the following sizes XLPE insulated PVC sheathed aluminium conductor armoured cable with necessary connection etc as required 117 3 core 4 Sq mm 118 Drawing of armoured/un-armoured cable with proper saddling etc as required:-

INR 1000 /-

INR 24775.0 /-

INR 12.38 Lakhs /-

FileName	File Description	File Size
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB