Tender For External Electrification And Lighting Work At Indirapuram Extension Scheme.- LT OVERHEAD LINE Supply of steel tubular pole 9 Metre long designated 410 SP-33complete in all respect. 2 Erection of metallic pole of following length in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40mm nominal size) foundation including excavation and refilling etc. as required. Above 8.0 meter and upto 10.0meter.[7077*0.789=6451.65*(111/110)=5634.51] 3 Supply&Erection of 3x120+1x95+1x16 Sq.mm Arial Bunched conductor of on steel tubular poles/steel rail/PCC poles with bolts, nuts etc. complete in all respect as per direction of E/L 4 Supply&Erection of Suspansion/ J type clamps of on steel tubular poles/steel rail/PCC poles with bolts, nuts etc. complete in all respect including painting with aluminium paint as per direction of engineer in charge 5 Supply & Fixing of Dead End Clemps with required nuts and bolts complete in all respect as per direction of E/L 6 Supply & Erection of PRC Connector for AB Cable etc. complete in all respect as per direction of E/1 7 Supply & Fixing of 8 way Distribution box for service connection complete in all respect as per UPPCL Rate 8 Supplying and erection of stay set complete (galvanised) with 19/20 mm dia X 1.8 metres long stay rod, anchor plate of size 45 cm X 45 cm X 7.5 mm, thimble, stay clamps, turn buckle (20 mm X 60 cm), 7/4.00 mm dia G.I. stay wire and strain insulator etc in cement concrete 1:3:6 (1 cement: 3 coarse sand 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc. as required.[5600*0.789=4418.4*(111/110)=4458.56] 9 HT OVERHEAD LINE Supply of steel tubular pole 11metrer long designated IS:410 SP-55botom galvenised complete in all respect. 10 Erection of metallic pole of following length in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40mm nominal size) foundation including excavation and refilling etc. as required. Above 10.00 meter and upto 12.00 meter[8177*0.789=6451.65*(111/110)=6510.30] 11 Supplying of 50 mm X 8 mm M.S. flat iron pole top bracket/ cross arm for single 11/22/33 KV over head line conductor complete with fixing clamps, bolts, nuts and washers drilling holes for insulator pins, bolts and nuts etc and painting with primer and finish paint as required.[615*0.789=485.23*(111/110)=489.64] 12 Supplying of channel iron 75mm X 40mm X 6mm ( 7.14 kg per metre) cross arm for two 11 KV over head line conductors complete with 50mm X 50mm X 6mm angle iron bracket welded to the channel iron and complete with 50 mm X 6mm M.S. flat iron clamps, bolts and nuts including drilling holes for insulator pins, bolts, nuts and washers etc (as per drawing) and painting with primer and finish paint as required.[2334*0.789=1841.52*(111/110)=1858.26] 13 Supplying of two lengths of channel iron 75 mm X 40 mm X 6 mm (7.14 kg per metre) double pole cross arm for three wire 11KV over head line conductors complete with through bolts and nuts for clamping to the poles, 50mm X 6mm M.S. flats welded on one side to the channel iron and with bolts and nuts on the other side for tying the cross arms together, including drilling holes for insulator pins/fittings, bolts, nuts and washers etc (as per drawing) and painting with primer and finish paint as required. [5125*0.789=4043.62*(111/110)=4080.38] 14 Supplying and erection of 11 KV disc insulator for 11 KV over head lines with galvanised insulator fittings, ball and socket type and complete with galvanised strain clamps, bolts, nuts, washers etc. as required. [978*0.789=771.64*(111/110)=778.65] 15 Supplying and erection of 11 KV pin insulator complete with large steel head G.I. pin, nuts, washers etc. as required. [312*0.789=246.16*(111/110)=248.40] 16 Supplying and erection of galvanised stay set for 11 KV over head lines complete with 19/20 mm dia X 1.8 metres long stay rod, anchor plate of size 45 cm X 45 cm X 7.5 mm thick, thimble, stay clamps, turn buckle (20 mm X 600 mm), 7/4.00 mm dia G.I. stay wire and 11 KV strain insulator etc in cement concrete 1:3:6 (1) cement: 3 coarse sand: 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc. as required.[5455*0.789=4303.99*(111/110)=4343.12] 17 Supply & erection of overhead line with ACSRconductor on poles / service bracket including binding etc. complete in all respects. (Dog conductor) 18 Supply & erection of overhead line with G.I. wire no. 8 to 4 SWG on poles/serivce bracket including binding etc. complete in all respect. 19 supply & fixing of 11KV TPMO switch with polymer insulator with clamps complete in all respect as per direction by E/I. 20 Supply & Fixing of 11 KV 3-phaseDO fuse set with clamps complete in all respect as per direction by E/I. 21 Supplying and erection of three piece nonlinear resistor type lightning arrestor suitable for 3 wire, 11 KV overhead lines with rated voltage 9 KV (rms) with a nominal discharge current rating of 5 KA and complete with galvanised clamping arrangement, G.I. bolts, nuts, washers etc, as required. [2628*0.789=2073.49*(111/110)=2092.34] 22 Providing & Fixing of 11 KV Jumpring for 11 KV Transformer & 11 KV Double pole complete in all respect. 23 Earthing with G.I. earth pipe 4.5 meter long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. (but without charcoal/ coke and salt) as required. [5368*0.789=4235.35*(111/110)=4274.00] 24 S/F of 2.5 mtr long 20 mm dia MS earth rod with 6 SWG GI earth wire, nut, bolt & washer etc. complete in all respect. 25 Painting of the electric pole with 2 coats of aluminium paint over red oxide primer complete in all respect. 26 Supply & fixing of anticlimbing device fabricated from G.I.(flat) of 25 mm x 6mm size in a shape of ring of the pole size, having G.I. flat pointed fins of length 225 mm in 8 nos. including all the materials, labour, T&P and other material required for proper completion for work and to the satisfaction of Engineer-in-Charge. 27 Supply and fixing danger board fabricated from 10 gauge M.S. Sheet as per I.E. Rules. 28 Supply & erection of hexagonal / cradle type gaused of G.I. wire no. 8 to 4 SWG including binding etc. complete in all respect. 29 Supply & erection of D clamps of 50 mm x 6mm flat iron on steel tubular poles / steel rail poles with bolts,nuts etc. complete in all respects including painting with aluminium paint . 30 Supply and fixing of 2.24m M.S, channel made of 75 X 40 mm with clamps,nuts,bolts,primer and paint overred oxide complete as per direction of engineer in charge. 31 HT UNDERGROUND CABLE Supply of 3 core standered aluminium conductor XLPE insulated cable 3 X 185 sq.mm 11KV grade. 32 Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 11 KV grade of following size in the existing RCC/HUME/METAL pipe as required. Above 120 sq. mm and upto 400 sq. mm. [134*0.789=105.72*(111/110)=106.68] 33 Supplying and making outdoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 kV grade as required.[22795*0.789=17985.25*(111/110)=18148.75] 34 Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc..direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required. 200 mm Dia. (OD-200mm & ID-175 mm nomial) [668*0.789=527.05*(111/110)=531.84] 35 Supplying and fixing of light class G.I. pipe of 100 mm dia. (nominal) 3 metres length along the pole for protection of under ground cable as required. [4907*0.789=3871.62*(111/110)=3906.81] 36 Trenchless Horizental boring with more then 2 Mtr. & upto 6 Mtr. Below ground level with 125 mm HDPE Pipe (PE-80, PN-6 Grade) by Machine Technology including cost of HDPE Pipe, T&P, Labour and all required meterial suitable for laying of LT 1100 V cable 120 Sqmm to 400 sqmm, 11000 V HT cable 120 Sqmm to 400 Sqmm and 33000 V HT cable upto 120 Sqmım size with proper completion of work as per direction of engineer in charge. 37 11 KV SUBSTATION Supply, Installation, Testing & Commissioning of 11/0.433 KV. 50Hz, 3 Phase 400 KVA copper wound outdoor type oil filled air cooled DYN-11 Vector group Transformer complete as per UPPCL Approved make & Specifications with all accessories such as Breather Temp meter Bucholz relay in all respect. as per direction of engineer in charge. 38 Supply, Installation, Testing & Commissioning of 11/0.433 KV. 50Hz, 3 Phase 250 KVA copper wound outdoor type oil filled air cooled DYN-11 Vector group Transformer complete as per UPPCL Approved make & Specifications with all accessories such as Breather Temp meter Bucholz relay in all respect. as per direction of engineer in charge. 39 Supply and fixing of 2 metres high cage fabricated with3mm thick expanded metal fixed on 50mm x 50mm x6mm angle iron frame having vertical members spaced at1 to 1.25 mts and horizontal members spaced at 1 mt. Thevertical members shall be grouted in floor and horizontalmembers in the wall to a depth of 300mm with endsforked.The cage shall have 2000mm x 1000mm size one leafdoor with locking device having door frame fabricatedwith 35mm x 35mm x 6mm angle iron and 3mm expanded metal duly fixed with the cage member withhinges etc. The cage shall be painted with red oxideprimer and synthetic enamel paint. The job includes allmaterials, labour, T&P etc. for proper completion ofwork. 40 Supply and construction of 1.5 X 1.5 X 1.3 Mt. Over all size Transformer plingth suitable for 250-630 KVA including 1.5 Mt. 100x50 mm 2 Nos. Channel piece, excavation back filling, 1.5 X 1.5 X 0.1 Mt. C.C., brick work including plasster complete in all respect. 41 Earthing with G.I. earth plate 600mm X 600mm X 6mm thick including accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 meter long etc. with charcoal/ coke and salt as required. [7472*0.789=5895.408*(111/110)=5949] 42 Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required.[244*0.789=192.51*(111/110)=194.26 43 Supply and laying of aluminium conductor PVCinsulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete inall respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. 240 sq. mm X 3-1/2 core 44 400 sq. mm X 3-1/2 core 45 185 sq. mm X3-1/2 core 46 Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 kV grade as required.240 sq. mm X 3-1/2 core (62mm)[1027*0.789=810.303*(111/110)=817.67] 47 400 sq. mm X 3-1/2 core (82 mm)[1556*0.789=1227.68*(111/110)=1238.84] 48 185 sq. mm X3-1/2 core (57mm)[875*0.789=690.37*(111/110)=696.65] 49 Supply and erection of factory fabricated and wired metal clad dust and vermin proof floor mounting panel TPN switch board complete with the following HRC type heavy duty TPN fuse switches with fuses and instrument chamber etc. complete in all respects. The instrument chamber shall be separate and shall comprise of flush type ammeter, voltmerer, selector switches for ammeter and voltmeter, instrument fuses, current transormer etc. The board shall have suitable capacity electroytic alumininum busbars as per IS8623 istulate with heat shrink sleeving and mountend on non hygroscopic supports such as CMC/DMC support with deteachable side covers and shall be suitable for extension on the sides. The switches shall be complete with suitable cable end boxes, reverse entery boxes in case of pedestaal type, cable sockets, compression glands and indicating lamp on incoming etc. The job includes the grounting of the board as per direction of Engineer-in-Charge. All coutgoing switches of 100 Amp. and above will be provided with ampere metre current transformers and selectorswitches and instrument fuses etc. The switches board shall be fabricated with CRCA sheet with a minimum thickness of 1.6 mm/2 mm. Cubicle type switch board shall be of cat A B & B-II and pedestal type for Cat-B and C only. Incoming 400 Amp. TPN-1 No Outgoing200 Amp. TPN-2 Nos. & 63 Amp. TPN-1 Nos. Cat. B. Cubicle Type 50 Incoming630 Amp. TPN-1 NoOutgoing200 Amp.TPN-2Nos., 100 Amp.TPN-1No & 63 Amp.TPN-2 Nos. Cat. B. Cubicle Type 51 STREET LIGHT WORK Supply & fixing of 9 mtr GI Octagonal Pole of approvedmake (top dia 70mm, Bottom dia 155 mm and base plate12mm thik) having 3mm thikness with single arm bracket (1 Mtr length) on RCC foundation including the cost of foundation, foundation bolts, excavation & back filling and Required T&P completee in all respect. 52 Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. 16sqmm 4core 53 Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc.25sqmm 3-1/2 core 54 S/L of 10 Sqmm x 2 core Unarmoured LT 1100 Volt Aluminium Conductor twin flate cable Complete. 55 Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.16 Sq.mm X 4 core. [309*0.789=243.80*(111/110)=246] 56 Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.25 Sq.mm X 3(1/2) core.[313*0.789=246.95*(111/110)=249.20] 57 Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc..direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required. 63 mm dia (OD-63 mm & ID-51 mm nominal)[247*0.789=194.88*(111/110)=196.65] 58 Supply and fixing of LED Street light Fitting havingdie cast aluminium body and diffuser with driver set suitable for 75 to 90 Watt. Confirming to IP 66 and above Protection complete in all respect.CAT-AAA 59 Supply and fixing of factory wired integral LED flood light luminaires with die cast aluminium housing built with dirver set suitable for 170 to 200 Watt. Confirming to IP 66 protection complete in all respect. CAT-AAA 60 Supply and fixing of 40 mm diametre 1.20 mtr long GI pipe (class-B) bracket for street light fitting.complete in all respect as per direction of engineer in charge. 61 Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. [256*0.789=201.98*(111/110)=203.82] 62 Supply and fixing following capacity of automatic street light cubicle control panel painted with anti corrosive alkali and acid proof paint consisting oftime switch TSO 100 series with contactors, HRC fuses, isolating switch metering instrument & instrument box with CTs etc. in case of TPN,complete in all respect.40 A TPN 63 Supply & fixing of 16 mtr High mast shaft of approved make with rising system hot dip glavanized inside & out side dip,heaving pole sheet thickness 3 mm. Top dia minium 150 mm, Bottom dia 360 mm base plate 32 mm thick suitable for wind velocity as per IS 875 part 3 & having no circumferential weld, with accessories for high mast such as head frame suitable for 6 to 12 luminaries & its control gear boxes 1.5 HP power tool moter, 3 point suspension system with steel wire rope 6 mm dia, double drum winch, including making suitable foundation as per manufature drawing/ site reuiment along with foundation bolts nuts, washers, anchor plates etc completee in all respect.
