Tender For Certain Repairs To Joinery, Ceiling And Misc Works In Sector 24, 37, 38 And 42 At Chandigarh; 1 Taking down existing aluminium door/ window shutters or partitions with frames, with or without glazing including fittings and removing from site complete all as specified and directed. 2 Material and labour for fixing 12 mm thick pre-laminated particle board with decorative lamination on both sides flat pressed three layer or graded wood particle board conforming to IS:12823 Grade l Type ll, in panelling fixed in aluminium doors, windows shutters and partition frames with and including rubber beading and anodised aluminium beading and C.P. brass / stainless steel screws etc. complete all as specified and directed 3 Refixing existing aluminium door/ window shutters or partitions with frames, with and including all necessary fittings and fixtures in same/ other location such as cleats, glazing clips, rubber neoprene packing etc as per site requirement complete all as specified and directed. (Retrieved from Ser Item No. 1 above) complete all as specified and directedNote:-Particle board and glass shall be measured and paid for separately under appropriate item etc. 4 Supply and fixing for powder coated any colour (thickness of coating not less than 50 micron) anodised aluminium door/window shutters aluminium section having weight 0.550 Kg per Running metre with and including necessary joining cleats, glazing clips, rubber neoprene packing, (handles 2 nos three hinges,150mm long aluminium tower bolts 2 nos door stopper in each shutter) anodised aluminium snap beading, screws etc. complete all as specified and directed. (Glazing, shall be measured and paid for separately) 5 Supply and fixing for powder coated any colour (thickness of coating not less than 50 micron) aluminium frame for doors, windows, ventilators, partition etc. with one or more rebates including joining cleat for fixing etc complete all as specified and directed 6 Supply and fixing for 5.5mm thick tinted sheet glass fixed to aluminium frame work using anodized aluminium beadwith and including rubber beading & packing, in panels exc 0.5 sqm in each pane complete all as specified and directed. 7 Supply and fixing for powder coated aluminiumwindow shutter glazed and wire gauzesliding shutters (three track) with and including aluminium window frame or chowkhats 1.5 mm thick aluminium anodized of size 65mm X 40mm and window shutter frames glazed and wire gauze (middle, top rail, bottom rail) and styles 1.5 mm thick aluminium anodized of size 44.50 mm x 44.50 mm including all fittings such as rubber gasket aluminium glazing beadings,self locking arrangement with aluminium handle of suitable size, 5.5 mm thick tinted glass for glazed window shutter, stainless steel wire mesh for gauze shutter and hook and eye for each shutter including aluminium grill of design and pattern as approved complete all as specified and directed. 8 Supply and fixing for powder coated any colour (thicknessofcoating not less than 50 micron) anodised aluminiumsliding door shutters aluminium section having weight 0.550 Kg per Running metre with and including top and bottom channel of suitable size including necessary joining cleats, glazing clips, rubber neoprene packing, (handles 2 Nos 150mm long aluminium tower bolts 2 Nos, in each shutter ) anodised aluminium snap beading, screws etc. complete all as specified and directed. 9 Material and labour for 18-20 mm thick granite (Baroda green) edges and corners rounded and chamfered as in cills of windows etc fixed with CM 1:4 complete all as specified and directed 10 Material and labour for 15mm thick cement plaster in C M 1:4 on concrete/brick surfaces finished even and smooth complete all as specified and directed 11 Taking down chowkhats or doors frames with shutters of any description (without taking off shutters from the frame) exc. 1.5 sqm but not exceeding 4.00 sqm each and removal of same from site complete all as specified and directed. 12 Taking down shutters of any description exc. 1 sqm but not exceeding 2 sqm each and removal from site complete all as specified and directed. 13 Taking down shutters of any description exc. 1 sqm but not exceeding 2 sqm each and refixing same in same/other opening after doing requisite repair as per site requirement and painting with one coat synthetic enamel paint complete all as specified and directed. 14 Supply and fixing for solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed. 15 Supply and fixing for factory made solid panel PVC moulded door shutter with particle board core, 28 to 30mm thick (style), with 2,4, or 6 raised panel design with 2mm thick moulded PVC sheet on the front face & 2 mm plain colour PVC sheet on back face, supply & fixing in frame at site as per specification & drawing complete all as specified and directed. 16 Supply and fixing for 35mm thick 2nd class hardwood (hollock) factory made three panels glazed and skeleton shutters, open rebated and prepared to receive glass etc divided into squares with sash bars, edges of framing plain, chamfered or rounded fitted with cut and metered beads for securing glass etc, size of members complete all as specified and directed. 17 supply and fixing for 35mm thick flush shutters, solid core construction, with particle board core and plywood face panels, commercial type on both sides 08022 flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed. 18 Supply and fixing for 40mm thick flush shutters, solid core construction, with block board grade 2 quality, i n t e r i o r grade with and including0.8mm thick decorative lamination/veneer on both sides fixed in any position with adhesive of approved quality and 2nd class softwood beads of requisite width and thickness 3 to 5 mm all around with and including painting of beading with two coats of synthetic enamelled paint over one coat of pink primer, as in shutters and the like, fixed in repair including taking down of existing of any description/size and disposal of same from site complete all as specified and directed. 19 Supply and fixing for 105X60mm pressed steel frames for doors with one or more rebates including necessary fixing lugs hinges lock strike plate etc including one priming coat in factory complete all as specified and directed. 20 Supply and fixing for 125X60mm pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc including one priming coat in factory complete all as specified and directed. 21 Material and labour for PCC 1:2:4 type B-1, using 20mm graded crushed stone aggregate as in bed plates, hold fast ,lacing course coping, and chowkhats etc bed blocks etc complete all as specified and directed. 22 Material and labour for clean sawn wrought fillets, 2nd class soft wood exe 6 cm sq and n.exe 13 cm sq , rectangular , squareor triangular in section, clean sawn, secured with nails or brads as in frames and the like with and including painting with two coats of synthetic enamelled paint over one coat of pink primerfixed in repair including taking down/dismantling of existing of any description/size and disposal of same from site complete all as specified and directed. 23 Supply and fixing for factory made ERW section window box type ( P Section) with hinges, steel handle, peg stay, and two Number of MS tower bolts 100mm size complete with glazing bars, dovetailed or welded (to receive glazed or gauzed) including one priming coat in factory fixed in repair including taking down/dismantling of existing of any description/size and disposal of same from site complete all as specified and directed. 24 Supply and fixing for factory made ERW section window box type ( P Section) with hinges, steel handle, peg stay, and two Number of MS tower bolts 100mm size complete without glazing bars, dovetailed or welded including one priming coat in factory fixed in repair including taking down/dismantling of existing of any description/size and disposal of same from site all as specified & directed complete all as specified and directed. 25 Supply and fixing for steel ventilator with top hung shutter including hinges steel peg stay, handlefixed in repair including taking down/dismantling of existing of any description/size and disposal of same from site complete all as specified and directed 26 Material and labour for framed work such as grills, gratings and hold fasts etc with ends of bars shoulder and or riveted or forged into spike, framed guard bars and similar work conforming to Fe 410-0 or Fe 310-0 fixed in repair including taking down/dismantling of existing of any description/size and disposal of same from site complete all as specified and directed. 27 Cutting holes for inserting hold fast and making good dismantled portion in CM (1:3) in brick walls, built in cement mortar or cement concrete 1:2:4 type B1as required exc one brick but not exc two bricks complete all as specified and directed. 28 Supply and fixing for MS helical door spring (rat tail pattern) 300mm long including roller and roller plate complete including necessary welding and providing 40 X 3mm flat iron welded to door frame as in repair complete all as specified and directed. 29 Supply and fixing for galvanized mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanized wire staples complete all as specified and directed. 30 Supply and fixing for galvanized mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks and provn of flat iron of requisite size, necessary welding and galvanized wire staples all as per site requirement fixed in repair in existing windows/openings (G+3 bldgs)including taking down/dismantling of existing of any description/size and disposal of same from site complete all as specified and directed. 31 Supply and fixing for mild steel work as in doors or gates of angle or other section of grade Fe-410-W with gusset plates, rails, braces etc complete drilled for fixing of steel sheeting or other covering doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fitting (exclusive of steel sheeting) fastening and fixing completefixed in repair including taking down/dismantling of existing of any description/size and disposal of same from site complete all as specified and directed. 32 Supply and fixing for 3.0mm thick ordinary sheet glass in squares n.exc. 0.5 sqm each pane fixed with silicon and oil complete all as specified and directed. 33 Supply and fixing for 3.0mm thick ordinary sheet glass in squares n.exc. 0.5 Sqm each pane with silicon and oil putty in repair in existing windows/openings (G+3 bldgs) including taking down/hacking out of existing of any description/size and removal of old putty completely and disposal of same from site complete all as specified and directed. 34 Supply and fixing for SS fancy type20 mm dia curtain rodsincurious site no ofbrackets ( two numbers of finial in each window/opening) fixed in repair including taking down/dismantling of existing of any description/size and disposal of same from site complete all as specified and directed. 35 Supply and fixing for hydraulic door closer of aluminium fixed with screws or welded frame to of designation complete all as specified and directed. 36 Supply and fixing for 100mm size mortice locks (with handle) of aluminium body, 4 levers suitable to aluminium door shutters complete all as specified and directed. 37 Supply and fixing in repair 100mm size mortice locks (with handle) of aluminium body, 4 levers suitable to aluminium door shutters complete all as specified and directed. 38 Supply and fixing for 300mm aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) fixed with nuts and bolts complete all as specified and directed 39 Supply and fixing for 100 mm aluminium alloy anodised hinges complete all as specified and directed. 40 Supply and fixing for aluminium anodized barrel tower bolt of extruded section 200mm long complete all as specified and directed. 41 Supply and fixing for aluminium anodized barrel tower bolt of extruded section 150mm long complete all as specified and directed. 42 Supply and fixing for aluminium anodized handle of extruded section 150mm long complete all as specified anddirected. 43 Supply and fixing for aluminium anodized door stopper 140mm long overall length complete all as specified and directed. 44 Material and labour for 18-20mm block boards, grade 2 quality, interior grade with and including0.8mm thick decorative lamination/veneer on both sides fixed in any position with adhesive of approved quality and 2nd class softwood beads of requisite width and thickness 3 to 5 mm all around with and including painting of beading with two coats of synthetic enamelled paint over one coat of pink primer, as in cupboards, shutters, shelves, partitions and the like, fixed in repair including taking down/dismantling of existing of any description/size and disposal of same from site complete all as specified and directed. 45 Supply and fixing for 30mm width of flap continuous (piano) hinges MS bright finish or electro galvanised complete all as specified and directed. 46 Supply and fixing for hasp and staple, safety types aluminium anodised 75mm complete all as specified and directed. 47 Material and labour for aluminium magnetic door catcher of suitable size for each shutter of cupboard/ almirah complete all as specified and directed. 48 Taking down cement plaster of any description including racking out joints, scrabing for key, scrubbing down with water etc (surrounding areas of doors, windows, openings or inside or out side of kitchen cabinets/cupboards/wardrobes or any location etc in small patches as per site requirement complete all as specified and directed. 49 Demolition of brick / block masonry built in CM including all quoins, arches, pillars etc and clearing rubbish off the premises complete all as specified and directed. 50 Material and labour for brick work with subclass B bricks, straight or curved on plan exc 6m mean radius built in cement mortar (1:6) complete all as specified and directed 51 Material and labour for rendering 12 mm thick on fair faces of brick work surfaces in internal wall with CM (1:6) finished smooth and even without using extra cement complete (surrounding areas of doors, windows, openings or inside or outsideof kitchen cabinets/cupboards/wardrobes etc in small patches as per site requirement complete all as specified and directed. 52 Material and labour for rendering 6 mm thick on fair faces of brick work surfaces in ceiling with CM (1:4) in small patches finished smooth and even without using extra cement complete all as specified and directed. 53 Material and labour for preparation of plastered or unplastered old & new decorated surface of wall including pilaster and cornices etc and applying two coats of oil bound distemper on over a layer of wall care putty on wall complete all as specified directed. 54 Material and labour for two coats of synthetic enamel painting including preparation of wood or wood based material surfaces of any description exc. 10 cm width or girth complete all as specified and directed. 55 Material and labour for two coats of synthetic enamel paint including one coat of red oxide primer on steel surfaces exc. 10cm width or girth including preparation of surfaces, complete all as specified and directed. 56 Material and labour for two coats of synthetic enamel painton steel surfaces exc. 10cm width or girth including preparation of surfaces, complete all as specified and directed. 57 Supply and fixing in repair venetian blinds, sheer demout blinds of with aluminium roller tube, cassette colour white fabric weight 140gms, light control 70% fabric composition 100% polyester complete all as specified and directed 58 Supply and fixing Zebra windowblinds (verticallyoperated with chain on both sides i.e Left & Right hand side)imported fabric with pelmet on top and bottom all as per manufacturers catalogue and sample kept in GE office, fixed firmly on walls with necessary clamps screws ,fastners/nut bolts etc with and including taking down existing blinds/pelmets etc of any description, making the disturbed ssurfaces good to match with existing and romoval of waste material outside the campus.Design and shade shall be got approved from GE before incarporating in the work. Note :-Each unit shall be measured made flat ( Lengh x Width ) 59 Welding in repairs to windows, door hinges, grills etc exc 2.50 cm of thickness not exc 6mm(G+3 bldgs) complete all as specified and directed.
