Bids Are invited for Title1 Providing, transporting, Assembling & placing / fixing in position Officer Disk of Size - 1500mm(L)x750mm(W)x740mm(H), with side table ERU -1050mm(L)x 450mm(W)x 705mm(H) Consisting of Specification. Table top shall be 25 mm thick plain particle board (PPB) Clad with 0.6 mm thick post formed laminate and 1 mm thick backing laminate (bdl). Flat edge Duly sealed with 2 mm thick PVC beading. The modesty shall be 18 mm thick plain particle board PPB Clad with 1.0 mm thick decorative laminate (DL) on both sides. Edge Sealed with 2 mm thick PVC beading. Finesse ERU -3616 RHS size shall be 1050 Width x 450 Depth x 705 Height. The top of Finesse ERU -3616 LHS shall be 25 mm thick plain particle board (PPB) Clad with 0.6 mm thick post formed laminate and 1 mm thick Backing Laminate (BDL). Flat Edge duly sealed with 2 mm thick PVC beading. The Modesty shall be 18 mm thick plain particle board (PPB) Clad with 1.0 mm thick Decorative Laminate (DL) on both sides. Edge sealed with 2 mm thick PVC Beading. The Product shall have green building certification such as INDOOR ADVANTAGE GOLD, All Complete as per Architectural drawing and direction of Engineer in charge Finnesse Table as shown in the Image of Godrej, Featherlite, or wipro make. 3 Title2 Providing, transporting, Assembling & placing / fixing in position High Back Chair consisting of Specification SEAT ASSEMBLY: The Cushioned seat should be made of Injection molded Plastic outer & inner. Plastic Inner should be upholstered with leatherette and moulded High Resilience (HR) Polyurethane foam of Density 45±2 kg/m3, and hardness load 16 ± 2 kgf as per IS:7888 for 25% compression. Seat SIZE: 47.0 cm. (W) x 48.0 cm. (D) BACK ASSEMBLY: The Cushioned back should be made of PU Foam with insitu molded MS E.R.W Round Tube of size 1.9±0.03cm x 0.16 ±0.0128cm. It upholstered with Leatherette. HIGH BACK SIZE: 47.7 cm. (W) x 76.4 cm ARMRESTS: The armrest top should be moulded from polyurethane (PU) and mounted on to a drop lift adjustable type tubular armrest support made of 03.81±0.03 cm x 0.2±0.01 cm thk M.S. E.R.W tube having chrome plated finish.The armrest height adjustable up to 6.5±0.5cm in 5 steps. ACTIVE BIO-SYNCHRO MECHANISM: The adjustable tilting mechanism should be designed with the following features: 360 revolving type. Frontpivot for tilt with feet resting on ground and continuous lumbar support ensuring more comfort. Tilt tension adjustment can be operated in seating position. 5-position Tilt limiter giving option of variable tilt angle to the chair. Seat/back tilting ratio of 1: 2 The mechanism housing should be made up of HPDC Aluminium black powder coated. SEAT DEPTH ADJUSTMENT: Seat depth adjustment should be integrated in the seat through a sliding mechanism. Seat depth adjustment range should be of 6.0±0.5 cm. ADJUSTABLE BACK SUPPORT: Back Frame should be connected to the Up/Dn mechanism housed in Plastic T spine. It can be adjusted in the range of 7.42±0.5 cm for the comfortable back support to suit individual need. PNEUMATIC HT. ADJUSTMENT: The pneumatic ht adjustment has an adjustment stroke of 10.0±0.3 cm. PEDESTAL ASSEMBLY: The pedestal should be High Pressure Die cast polished Aluminium and fitted with 5 nos. twin wheel castors. The pedestal should be 65.0 ± 0.5cm. pitch-center dia. (75.0 ± 1.0cm. With castors.) TWIN WHEEL CASTORS: The twin wheel castors should be injection moulded in black PP having 6.0± 0.1cm wheel Diameter. The Product shall have green building certification such as GreenGuard Gold, IAQ Gold, GRIHA & SVAGRIHA, BIFMA Level 2, Green PRO, All complete as per Architectural drawing and direction of Engineer in charge. Marvel High Back as shown in the Image of Godrej, Featherlite, or wipro make. 4 Title3 SEAT/BACK ASSEMBLY: The seat and back are made up of 1.2 cm. thick hot-pressed plywood, upholstered with fabric upholstery covers and moulded Polyurethane foam. The back foam is designed with contoured lumbar support for extra comfort. The seat has extra thick foam on front edge to give comfort to political area. HIGH BACK SIZE: 47.5 cm (W) x 69.5 cm (H) SEAT SIZE: 47.0 cm. (W) x 48.0 cm. (D) POLYURETHANE FOAM: The Polyurethane foam is moulded with density = 45 +/-2 kg/m3 and Hardness = 20 +/- 2 at 25% compression. ARMRESTS: The one-piece armrests are injection moulded from black Co-polymer Polypropylene. CENTER TILT SYNCHRO MECHANISM: The mechanism is designed with the following features: 360Degree revolving type. Upright position locking. Tilt tension adjustment. Seat/back tilting ratio of 1:3 (60 seat tilt/180 back tilt) PNEUMATIC HEIGHT ADJUSTMENT: The pneumatic height adjustment has an adjustment stroke of 12.0 cm. TELESCOPIC BELLOW ASSEMBLY: The bellow is 3 piece telescopic type and injection moulded in black Polypropylene. PEDESTAL ASSEMBLY: The pedestal is injection moulded in black 30% glass-filled Nylon and fitted with 5 nos. twin wheel castors. The pedestal is 66.0cm pitch-centre dia. (76.0 cm with castors.) TWIN WHEEL CASTORS: The twin wheel castors are injection moulded in Black Nylon. The Product shall have green building certification such as GREENPRO, GRIHA, INDOOR ADVANTAGE GOLD, BIFMA LEVEL 2 All complete as per Architectural drawing and direction of Engineer in charge. Bravo High Back Chair as shown in the Image of Godrej, Featherlite, or wipro make. 8 Title4 SEAT/BACK ASSEMBLY: The seat and back are made up of 1.2 cm. thick hot-pressed plywood, upholstered with fabric upholstery covers and moulded Polyurethane foam. The back foam is designed with contoured lumbar support for extra comfort. The seat has extra thick foam on front edge to give comfort to popliteal area. MID BACK SIZE: 47.5 cm. (W) x 58.0cm. (H) SEAT SIZE: 47.0 cm. (W) x 48.0 cm. (D)POLYURETHANE FOAM: The Polyurethane foam is moulded with density = 45 +/-2 kg/m3 and Hardness = 20 +/- 2 at 25% compression. ARMRESTS: The one-piece armrests are injection moulded from black Co-polymer Polypropylene. TUBULAR FRAME: The powder coated tubular frame is cantilever type & made of dia 25.4mm x 2mm thk M.S. ER.W. Tube. The twin wheel castors are injection moulded in Black Nylon. The Product shall have green building certification such as GREENPRO, GRIHA, INDOOR ADVANTAGE GOLD, BIFMA LEVEL 2 All complete as per Architectural drawing and direction of Engineer in charge. Bravo Visitor Chair as shown in the Image of Godrej, Featherlite, or wipro make. 10 Title5 Providing, transporting, Assembling & placing / fixing in position Pentagonal Workstation Size - 1500W1x1500W2x600D Consisting of Specification - Providing and fixing Workstations at all floors (GRIHA Complaint product) having thickness of 52.4 mm to 60mm, 1200mm ht. Panel based work station partition with flexible construction offering various functional and decorative finishes as well as cable management capacity. Vertical and horizontal extrusions should be made of Aluminium AL96063-T6 with an average wall thickness of 1.2mm coated with average 50micron thick epoxy powder coating. All trims shall be made of aluminium extrusions specified for horizontal and vertical members. Top trim shall be press fitted on horizontal extrusion. End trim shall be slide fitted with the help of corner made from 2mmthick MS CRCA Grade D as per IS:513. 1200mm height panel comprises of 3 to 4 Horizontal divisions - 1 or 2 nos middle blocks and 2 nos one each at Top & Bottom. Blocks made out of a composite construction of MDF and paper honeycomb with one side rough prelaminate / fabric wrapped on it. Top panel Tiles should be slid in to the panels from top before fixing the top horizontal. Top tile to be in combinations of Fabric tack tiles / Fabric Magnetic/ Laminate / White Board. These tiles to be supported from top & bottom side with clips made from PP co polymer fitted in horizontal extrusion. Bottom tile and leg to be made of Mild steel CRCA Grade D with epoxy powder coating. Bottom frame shall be fabricated as a welded structure of steel components. The panels and worktops to be supported with MS legs with levellers at various locations depending on the layout requirements. Panel is elevated from the floor by 100-120mm with the help of panel legs. Work top shall be made of 25mm thick Pre laminated particle board interior grade of approved shade conforming to IS: 12823. Bottom shall have a backing laminate of minimum 0.6 mm thickness. All the edges of work surface shall be provided with machine pressed 2 mm thick PVC lipping. Plain Metal tiles are made of 0.6 mm thick M.S. CRCA Grade D as per IS: 513 powder coated with Epoxy- Polyester finish. Fabric magnetic tiles are fabric upholstered metal tiles in 0.6 mm thick. Fabric Tack able tiles are fabric upholstered metal tiles in 0.6 mm thick with P.E. Foam in the tile for tackability. Laminate tiles are made of 8.0 mm thick particle board laminated with 0.6mm backing laminate on inner surface and all its edges with minimum 0.5 mm thick PVC edging. White board tiles shall made of 8.0 mm thick particle board laminated with 0.6mm thick white glossy high pressure laminate on outer side 0.6mm backing laminate on inner surface and having all its edges with minimum 0.5 mm thick PVC edging. Glass tiles 4 mm thick toughened clear glass is fitted onto both sides of the panel using horizontal and vertical stiffeners made from 0.6 mm powder coated CRCA steel Grade D as per IS: 513. Gable end panels are made of 25 mm thick PLT mounted with the help of full gable end bracket (LH & RH options) made from 1.2mm thick M.S. CRCA grade D as per IS:513. Work surface bracket mounted on to the horizontal extrusion shall be made from 2 mm thick CRCA grade D steel as 11 Title6 Providing, assembling, transporting & placing / fixing in position modular workstation (size -1500 mm wx750 mmm dx750 mmh, ERU – 900Wx450Dx750H), with partition thickness as 52.4 mm thk and ht - 1200 including powder coated aluminium trims. Split tiles: combination of two finishes for the top tiles on the user side shall be split fabric tackable along with split white board. Intermediate blocks intermediate blocks are given in fabric + fabric finsh. wire management - wires shall be taken into the system through cable ducts from the junction boxes and it is carried upto the panels through concealed conduits inside the blocks. legs - out of 25 mm thk prelam particle board with flat pvc lipping edge banding considered only on the open end conditions or metal powder coated legs at the end and shared condition. System shall also have 120 mm high powder coated standalone panel legs to give the system an elevated look. worksurface - out of 25 mm thk prelam particle board with flat pvc lipping edge banding of size 1200 mm w x 600 mm d. pedestals with or without legs - nova pedestal flat metal front, full ht free standing central locking of size 390 mm w x 435 mm d x 646 mm ht 3dr = 2box+1file. Product should have cutouts for fixing electrical power outlet like modular type switches & sockets etc. The Product shall have green building certification such as IAQ Gold, BIFMA Level 3, Green PRO, GRIHA & SVAGRIHA, All complete as per Architectural drawing and direction of Engineer in charge. Wish system Workstation as shown in the Image of Godrej, Featherlite, or Wipro make. 1 Title7 Seat Back Assembly: The seat and back are made up of 1.2+-0.1m. thick hot – pressed plywood measured as per QA method described in OCP- QLTA-P14-18 and upholstered with fabric upholstery covers and moulded polyurethane foam. The back foam is esigned with contoured lumbar support for extra comfort. The seat has extra thick foam on front edge to give comfort to popliteal area. PCH – 9U02RG Mid back size 47.5cm. (W) X 58.0cm.(H) PCH-9U02RG Seat Size: 47.0cm(W) x 48.0cm (D) High Resilience (HR) polyurethane foam: The HR polyurethane foam for seat and back is moulded with density = 45 +2kg /3m and hardness load 16 + -2 kgf as per IS :7888 for 25% compression. Armrests: The one- piece armrests are injection moulded from back co-polymer polypropylene. Center Tilt Synchro Mechanism (for 9U02RG) The mechanism is designed with the following features: 360degree revolving type, Upright position locking, Tilt tension adjustment, Seat back tilting ratio of 1:3. Pneumatic height adjustment (for PCH-9U02RG) : The pneumatic height adjustment has an adjustment of 12.0+0.3-cm Telescopic bellow assembly (for 9U02RG) The bellow is 3 piece telescopic type and injection moulded in back polypropylene. Pedestal assembly (for PCH- 9U02RG) The pedestal is injection moulded in back 33% glassfilled nylon -66 and fitted 5 nos. twin wheel castors. The pedestal is 66.3+-0.5cm. Pitch-center dia. 76.3+- 1.0cm with castors. Twin wheel castors (for PCH – 9P02A): The twin wheel castors are injection moulded in black nylon. The Product shall have green building certification such as GREENPRO, GRIHA, INDOOR ADVANTAGE GOLD, BIFMA LEVEL 2 All complete as per Architectural drawing and direction of Engineer in charge. Bravo Mid Chair as shown in the Image of Godrej, Featherlite, or wipro make. 12 Title8 Providing, transporting, Assembling & placing / fixing in position 3 Drawer Pedestal Size – 390Wx440Dx646H consisting of Specification -3drawer pedastal unit (box+box+file) to be made out 0.8mm thk CRCA for body shell, drawer tray, front & rear side stiffner. Top & bottom stiffner of 1.2mm thk. All slides with double extension precision ball slide. Drawers to be without handles for clean finish. For drawer pulling, side wise tapered recess provided in shell behind drawer fronts. 10 lever cam lock & central locking with actuator & lock channel mechanism. Metal finish to be in epoxy polyster power coated with 40 to 50 microns. The Product shall have green building certification such as GREENGUARD, All complete as per Architectural drawing and direction of Engineer in charge. Bravo Mid Chair as shown in the Image of Godrej, Featherlite, or wipro. 15 Title9 Providing, transporting, Assembling & placing / fixing in position KBPT Consisting of Specification – Metal Tray made up of 0.9 mm thick CRCA ‘D’ grade as per IS: 513. Size: 482 x 280 x 40. Single extension ball slide assembly Size: 350 x 11.8. Single extension stroke 230mm. Ball Slide made up of combination of 1.2/1.5 mm thick roll formed CRCA ‘D’ grade as per IS: 513. Mouse tray Size: 210 x 210 made of 0.9 mm thick CRCA ‘D’ grade as per IS:513. All complete as per Architectural drawing and direction of Engineer in charge. 24 Title10 Providing, transporting, Assembling & placing / fixing in position CPU Trolly Consisting of Specification - Size:- 230mmWX226mmDX180mmH. Base tray to be made up of 1mm thk MS CRCA steel and side support to be made up of 0.8 thk. MS CRCA sheet. Non lockable twin wheel castors to be injection moulded in Black Nylon. All complete as per Architectural drawing and direction of Engineer in charge. 24 Title11 Providing, transporting, Assembling & placing / fixing in position Footrest Consisting of Specification - Supplying of Ergonomic Footrest, for stress free posture with Adjustable Angle, Slip resistant surface. The foot rest Platform Size will be 445mm x 295mm. All complete as per Architectural drawing and direction of Engineer in charge. 24 Title12 Providing, assembling, transporting & placing in position Storage unit of Size: Minor: 900 mm (W) x 450mm (D) x 1167.5mm (H) as per KD Minor of Godrej make consisting of specifications: Rigid Knock down construction made of Prime Quality CRCA Steel - Panels from 0.6 mm thick (±0.07mm) & Front frame, Shelf 0.8 mm thick (±0.08mm). CRCA‘D’ grade as per IS:513. Full height Steel Hinged Door, Plastic Recessed Handle cum Cam Lock,3 way locking mechanism with shooting bolt arrangement, Uniformly Distributed Load Capacity per each full/half shelf is 40 Kg maximum, 2 Nos. of Adjustable Full Shelves. Leveler should be Screw type leveler with Hex. Plastic base (add in unit height min-8mm & additional 5mm max. for adjustment. Epoxy Powder coated to the thickness of 50 microns (+/-10). All complete as per Architectural drawing and direction of Engineer in charge. KD MINOR with Wooden TOP as shown in the Image of Godrej, Featherlite, or wipro make. 11 Title13 Providing, assembling, transporting & placing / fixing in position in position of storage unit shall have an overall size of 916mm(w)x486mm(d)x1981mm(h) with welded construction. It should have the shelf thickness of 0.7 mm, back thickness of 0.8mm, door thickness of 0.8mm (high yield strength) and all other components shall have a thickness of 0.9mm. These components shall be made of crca ‘d’ grade high yield strength as per is:513. The storwel plain should have a mazak handle and threeway locking mechanism with shooting bolts. It should have a height wise adjustable shelf mounting which shall have a uniformly distributed load capacity of max 40 kg. It should also have a m10 screw type leveler with hex plastic base. The finishing shall include epoxy powder coated to the thickness of 50 microns (/- 10). Plenty of colour options and shelving options shall be available. The product shall be certified from griha & svagriha, green pro, greenguard, indoor advantage gold, bifma compliant. oem should have iso 9001:2015 (for quality management system- qms), iso 14001:2015 (for environment management system- ems), and iso 45001:2018 (for occupational health and safety management system) certification. The Product shall have green building certification such as GREENPRO, GREENGUARD, GRIHA, INDOOR ADVANTAGE GOLD, All complete as per Architectural drawing and direction of Engineer in charge. Storwel Plain as shown in the Image of Godrej, Featherlite, or wipro make. 5 Title14 Wooden Partition:- Fixing of laminated partition with aluminium box section pipe frame covered with marine grade plywood and finished with 6mm laminate both side with the above specification. All complete as per Architectural drawing and direction of Engineer in charge Total Quantity : 824
