Tender For Miscellaneous Civil Works In Humanities And Social Science Dept. (Roof Treatment, False Ceiling, Painting, Aluminium Sliding Window Etc.), Cubical Partition In Physics Dept. And False Ceiling In Seminar Room - Demolishing cement concrete manually/ by mechanical means including disposal of materials with in 50mtr lead as per direction of Engineer in Charge. Cement concrete 1:3:6 or richer Mix 2 Dismantling old plaster orskirting racking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50mtr lead 3 Providing and finishing with 12mm cement plaster of mix 1:4 ( 1 cement : 4 Sand) 4 Providing and laying in position Reinforced cement concrete of specified grade excluding the cost of centering and shuttering. Cement concrete in 1:2:4 (1 Cement : 2 sand:4 Coarse Aggregate 20mm Down) complete in all respect as per direction of Engineer in charge. 5 Providing and laying Vitrifiedfloor tiles in different sizes(thickness to be specified by the manufacturer)with water absorption less than 0.08% and conforming to IS 15622 of approved make in all colours shade laid on 20mm thick cement mortar 1:4 (1 cement : 4 sand) including pointing the joints with white cement and matching pigment etc. complete as per direction of Engineer-in-Charge. Sizes of Tile 600 x 600 mm 6 Deduct for not using 20mm thick cement mortar 1:4 (1 cement : 4 sand) bedding in laying of floor tiles 7 Fixing glazed /ceramic /vitrified floor tiles with cement based high polymer modified quick set tile adhesive (water based) conforming to IS 15477 using 5 kg Adhesive per Sq.M of tile area in average of 3mm thick ness 8 Providing and fixing aluminium work for doors and windows ventilators and partitions with extruded builtup standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS 733 and IS 1285 fixed with rawl plug and screw or with fixing clips or with expansion holdfasteners including necessary filling up of gaps at jinction at top and bottom and sides with required PVC /neoprene flt etc aluminium sections shall be smooth rust free straight mitred and jointed mechanically wherever required including cleat angles , Aluminium snap beading for glazing /panelling CP brass /stainless steel screws all complete as per architectural drawings and direction of Engineer in Charge (glazing and panelling to be paid separately): (Section :DOOR : V:85x44.45x1.8@1.301kg/mt, Top: 114.30x44.45x1.35 @1.139Kg/mt, Bottom:114.30x44.45x1.49 @1.19Kg/mtr, middle: 100x44.45x2.0 @1.603Kg/mtr///Fixed Section: Top/Bottom: 63.5x38.1x1.5@ 0.861kg/mtr, Middle double groove: 63.5x38.1x1.53@0.942kg/m/// Door frame:101x44.45x1.60 @1.301Kg/mtr/// Casement window: frame: 38x46x1.4 @0.622kg/m, mullion: 59x38x1.4@0.729kg/m, 44x46x1.4mm @0.575kg/m, clip 21x15.4x0.85mm@0.137kg/m///) Powder coated aluminium (aluminium thickness of powder coating 50Micron) For fixed Portion 9 Providing and fixing aluminium work for doors and windows ventilators and partitions with extruded builtup standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS 733 and IS 1285 fixed with rawl plug and screw or with fixing clips or with expansion holdfasteners including necessary filling up of gaps at jinction at top and bottom and sides with required PVC /neoprene flt etc aluminium sections shall be smooth rust free straight mitred and jointed mechanically wherever required including cleat angles , Aluminium snap beading for glazing /panelling CP brass /stainless steel screws all complete as per architectural drawings and direction of Engineer in Charge (glazing and panelling to be paid separately): (Section :DOOR : V:85x44.45x1.8@1.301 kg/mt, Top: 114.30x44.45x1.35@1.139Kg/mt, Bottom:114.30x44.45x1.49 @1.19Kg/mtr, middle: 100x44.45x2.0 @1.603Kg/mtr/// Fixed Section: Top/Bottom: 63.5x38.1x1.5 @0.861kg/mtr Middle double groove: 63.5x38.1x1.53@0.942kg/m /// Door frame: 101x44.45x1.60 @1.301Kg/mtr/// Casement window: frame: 38x46x1.4@0.622kg/m, mullion: 59x38x1.4@0.729kg/m, 44x46x1.4mm@0.575kg/m, clip 21x15.4x0.85mm@0.137kg/m///) Powder coated aluminium (minimum thickness of powder coating 50Micron). For shutters of doors , windows & ventilators including providing and fixing of hinges/ pivots and making provision for fixing of fittings wherever required including the cost of PVC/neoprene gasket required (fitting shall be paid separately) 10 Providing and fixing aluminium work half glazed with 5.0mm thick glass pane and half poanelled with prelaminated particle board (Nova board) as per IS 12823 grade 1 type II in panelling for doors and windows ventilators and partitions with extruded builtup standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS 733 and IS 1285 fixed with rawl plug and screw or with fixing clips or with expansion holdfasteners including necessary filling up of gaps at jinction at top and bottom and sides with required PVC /neoprene fillet etc aluminium sections shall be smooth rust free straight mitred and jointed mechanically wherever required including cleat angles , Aluminium snap beading for glazing /panelling CP brass /stainless steel screws all complete as per architectural drawings and direction of Engineer in Charge (all fittings such as hinges handle and beading etc all are included and measured in Sq.M) ((((DOOR : V:85x44.45x1.8@1.301 kg/mt, Top: 114.30x44.45x1.35@1.139Kg/mt, Bottom 114.30x44.45x1.49@1.19 Kg/mtr, middle: 100x44.45x2.0@1.603Kg/mtr)))). For shutters of doors , windows & ventilators including providing and fixing of hinges/ pivots and making provision for fixing of fittings wherever required including the cost of PVC/neoprene gasket required. 11 Providing and laying APP (Atactic polypropylene polymer) modified prefabricated five layer minimum 3mm thick waterproofing membrane , mineral top finished reiforced with non-oven polyster matt manufactured by Bitumat co. Ltd, Suprema general membranes ,Tamko,Sika India pvt ltd ,STP ltd,Hydrotech ltd,Dr. fixit , prodorite ltdor equivalent, consisting of a coat of bitumen primer for bitumen membrane @ 0.40 ltr /Sqm by the same membranemanufacture of density at 25°C , 0.87-0.89 kg/ltrand viscosity 70-160 cps. over the prime coat , the layer of membrane shall be laid usingButane torchand sealing all jointsetc and preparing the surface by filling undulations with cement mortar (1:6) andcuring the surfacecomplete in all respect ( to be paid separately ) and as per direction of Eng-in-charge. 12 Providing and fixing of sheet covering over expansion joints with iron screws as per design to match the colour /shade of wall tretment Aluminum fluted strips 3.15mm thick 150mm wide 13 Providing and fixing of sheet covering over expansion joints with iron screws as per design to match the colour /shade of wall tretment Aluminum fluted strips 3.15mm thick 200mm wide 14 Providing Filling the Expansion joint with joint sealing compound on polyeurathane based or equivalent including a backup material like Thermocole / Celatex board inside the groove of expansion joints. The width to depth ratio of sealant should be 2:150mm gap 15 Providing Filling the Expansion joint with joint sealing tape (Combiflexor equivalent ) including a backup material like Thermocole / Celatex board inside the groove of expansion joints Complete as permanufacturers Specificationand direction of Engineer in Charge. 50mm gap 16 Providing and fixing of sheet covering over expansion joints with iron screws as per design to match the colour /shade of wall tretment. ACP sheet fluted strips 3 mm thick 200mm wide 17 Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS12823 grade 1 type II in panelling fixed in aluminium doors windows shutters and partition frames with CP brass /stainless steel screws etc complete as per architectural drawing and direction of EngineerinCharge. Prelaminated particle board with decorative lamination on one side and balancing lamination on other side. 18 Providing and fixing of glazing in aluminium door window ventilator shutters and partition etc with PVC /neoprene gaskets etc complete as per architectural drawingand the direction of the Engineer in Charge (Cost of aluminium snap beading shall be paid in basic item)With float glass panesof 5.5 mm thickness 19 Providing and fixing of glazing in aluminium door window ventilator shutters and partition etc with PVC /neoprene gaskets etc complete as per architectural drawingand the direction of the Engineer in Charge (Cost of aluminium snap beading shall be paid in basic item)With float glass panesof 4.0mm thickness 20 Filling gap in between aluminium frame and adjacent RCC/ Brick /Stone work by providing weather silicon sealant over backer rod of approved quality as per architecural drawings and direction of Engineer in Charge complete. Upto 5mm depth and 5mm width 21 Providing and fixing aluminum round shape Designer handle of 200mm size with ss screws etc complete as per direction of Engineer in Charge.Anodized (AC 15) Aluminium 22 Providing and fixing SS patch fitting lock for glass doorof godrej/link (best quality of approved make for toghened glass doors including cutting and making goodetc and fixingwith ss screws etc complete as per direction of Engineer in Charge 23 Providing and fixing of IS 12817 marked stainless steel butt hinges with stainless steel screw etc complete100x58x1.90mm 24 Providing and fixing of IS 12817 marked stainless steel butt hinges with stainless steel screw etc complete 75x47x1.70mm 25 Providing and fixing of IS 12817 marked stainless steel butt hinges with stainless steel screw etc complete 50x37x1.50mm 26 Providing and fixing ISI marked aluminium butt hinges anodised coating not less than grade AC 10 as per IS 1868) transparent or dyed to required colour or shade with necessary screws etc complete: butt hinges(Heavy type) with necessary screw etc complete as per direction of Engineer in Charge. 125x75x4mm 27 Providing and fixing of aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS :1868) transparent or dyed to required colour or shades with necessary screw etc complete as per direction of Engineer in Charge. 250x10mm 28 Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS 1868) transparent or dyed to required colour or shade with nuts and screw etc . Complete: 250x16mm 29 Providing and fixing aluminium handles ISI marked anodised (anodic coating not less than grade AC10 as per IS 1868) transparent or dyed to required colour or shade with necessary screw etc. complete: 100mm 30 Providing and fixing aluminum hanging floor door stopper ISI marked anodised (anodic coating not less than grade AC 10 as per IS 1868) transparent or dyed to required colour and shade with necessary screws etc complete: Double rubber stopper 31 Dismantling aluminium/ gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unservicable materials and stacking of servicable materials within 50mtr lead as directed by Engineer-in-Charge. 32 Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repair to scratches etc complete 33 Providing and fixing at all heightfalse ceiling excluding cost of frame work made of special sections power pressed from M.S sheet and galvanised in accordance with zinc coating of grade 350 as per IS 277 with 25mm long drive all screw @230mm interval including jointing and fixing to a flush finish of tapered and square edges of the board with recommended filler, jointing tapes, finisher and two coats of primer suitable for board as per manufacturer specification and also including the cost of making opening for light fittings and grills, diffusers, cutouts made of frame of perimeter channels suitably fixed all complete as per drawing and specification and diretion of Engineer in Charge including the cost of painting with oil bound distemper.12.54mm thick tapered edge gypsum fire resistant board conforming to IS 2095-Part-I 34 Providing & fixing false ceiling at all height including providing & fixing of framework made of special section, power pressed from M.S. sheets and galvanised with zinc coating of 120 gms/ sqm (both side inclusive) as per IS : 277 and consisting of angle cleat of size 25mm wide x 1.6mm thick with flanges of 27mm and 37mm, at 1200mm c/c, one flange fixed to the ceiling with dash fastener 12.5mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25 x10 x0.50mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I chanels 45 x15 x 0.90mm running at the spacing of 1200 mm c/c, to which the ceiling section 0.5mm thick bottom wedge of 80mm with tapered flanges of 26 mm each having lips of 10.5mm, at 450mm c/c, shall be fixed in a direction perpendicular to G.I intermediate channel with connecting clip made out of 2.64mm dia x 230mm long G.I wire at every junction, including fixing perimeter channels 0.50mm thick 27mm high having flanges of 20mm and 30mm long, the perimeter of ceiling fixed to wall/ partitions with the help of Rawl plugs at 450mm centre, with 25mm long dry wall screws @ 230mm interval, including fixing of Calcium Silicate Board to ceiling section and perimeter channels with the help of dry wall screws of size 3.5 x25mm at 230mm c/c,including jointing & finishing to a flush finish of tapered and square edges of the board with recommended jointing compounds, jointing tapes,finishing with jointing compounds in three layers covering up to 150mm on both sides of joints and two coats of primer suitable for boards, all as per manufactures specification and also including the cost of making opening for light fittings, grills, diffusers, cut outs made with frame of perimeter channels suitably fixed, all complete as per drawings, specificaton and direction of the Engineer in charge but excluding the cost of painting with: 8 mm thick Calcium Silicate Board made with Calcareous & Siliceous materials reinforced with cellulose fiber manufactured through autoclaving process. 35 Providing and fixing false ceiling at all heights with integral densified calcium silicate reinforced with fibre and natural filler false ceiling tiles of Size 595x595mm of approved texture, design andpatterns as per CPWD Specification 2019, to be laid in true horizontal level suspended on inter-locking metalT-Grid of hot dipped galvanised iron section of 0.33mmthick(galvanized@120gramspersqmincludingbothsides)comprising ofmain-Trunners of size 24x38 mm of length 3000 mm,cross-Tofsize24x32mmoflength1200mmandsecondaryintermediate cross-Tof size 24x32 mm of length 600mm to formgrid module of size 600 x 600 mm, suspended from ceiling usinggalvanised mild steel items (galvanizing @ 80 grams per sqm) i.e. 12x50 mm long dash fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 76x25x25x1.6 mm fixed with grid and Z cleat of size 25x37x25x1.6mm thick with precut hole on both 25mm flange to pierce into 12x50mm or even bigger size dash fastener if require, fixed with Glavanised iron perimeter wall angle or size 24x24x0.40 mm of length 3000 mm to be fixed on periphey wall / partition with the help of plastic rawl plugs at 450mm center to center and 40 mm long dry wall S.S screws. The workshall be carried out as per specifications, drawing and as per directionsof the Engineer-in-Charge. With 15 mm thick Tegular edged light weight calcium sliciate false ceiling tiles 36 Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Clerestory windows & other Frames/Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms)fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread offlame of Class Acategorywith property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and lengthcomplete as per direction of Engineer-In- Charge.Frame size 65 x 100 mm 37 Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate andnatural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimumcompressive strength50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread offlame of Class Acategory with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all complete as per direction of Engineer-In- Charge. 30 mm thick 38 Providing and fixing 1.5 mm thick Laminates (MARINO)glossy finish or simple mat finish as per requirement and direction of EngineerinCharge with adhesive of approoved make complete as and where required cost including all wastage and adhesive etc complete. 39 Applying one coat of acrylic primer of approved brand and manufacturer on wall surface as per manufacturers specification. 40 Providing and finishing wall/ceiling surface with acrylic wall care putty (water based) of approved make (Birla or Equivalent) and finished smooth and even surface to receive painting including cost of scaffolding staging charges with all cost of materials taxes labour T&P etc complete 41 Distempering with 1st quality acrylic distemper (readymade) of approved manufacture and of required shade and colour complete, as per manufacturers specification. New Work( Two or more coats ) 42 Conveyance of materials such as dismantled materials, garbage, rubbish, stone metalrefuse etc. including labour for loading and unloading beyond the initial lead complete as per direction of Engineer-in-charge. Truck load upto 2 km
