|
| 1 | Dismantling cement fibre boards manually& disposal of material within 50 metres lead as per direction of Engineer- in-charge. Complete |
| 2 | Providing and fixing T&G panelling 10-12 mm thick imported wood to be fixed as per the pattern/theme provided by the department concerned including all carriages,leads and lifts, screws and nails etc upto desired height. All complete. |
| 3 | Providing and fixing of 12 mm ply to ply on walls making the surface plain including the cost of necessary fittings, screws, nails and scalfolding etc. All complete. |
| 4 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades,laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm |
| 5 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete. |
| 6 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 7 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size). |
| 8 | Steel reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete upto plinth/ above plinth level. Thermo-Mechanically Treated bars of grade Fe-500 D or more incl. of all carriages complete. |
| 9 | Centering and shuttering including strutting, propping etc. and removal of form for: Suspended floors, roofs, landings, balconies and access platform |
| 10 | Brick work with common burnt clay modular bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:4 (1 cement : 4 coarse sand) |
| 11 | 12mm plaster on fair side of brick/concrete work in 1:6 mix incl c/o frame work anf incl. of all carriages complete. |
| 12 | Providing and applying white cement based putty of average thickness1 mm, of approved brand and manufacturer, over the plastered wallsurface to prepare the surface even and smooth complete. |
| 13 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanitycounters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. completeat all levels.Raj Nagar Plain white marble/ Udaipur green marble/ Zebrablack marbleArea of slab over 0.50 sqm for counters |
| 14 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :For fixed portion Powder coated aluminium (minimum thickness of powder coating 50 micron) |
| 15 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittingsshall be paid for separately)Powder coated aluminium (minimum thickness of powder coating 50 micron) |
| 16 | Providing and applying of wallpaper to the walls of approved design and brand including the cost of scalfolding and adhesive require for completion of Job. |
| 17 | Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS:12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineerin-chargePre-laminated particle board with decorative lamination onboth sides |
| 18 | Providing and fixing Brass 100 mm mortice latch and lock with 6 levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete. |
| 19 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not lessthan grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, withnecessary screws etc. complete :200x10 mm |
| 20 | Providing and fixing ISI marked aluminium butt hinges anodised (anodic coating not less thangrade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessaryscrews etc. complete:100x75x4 mm |
| 21 | P/F of geyser of 50 ltrs capcity white color of approved brandcomplete with all necessary geyser bolts/fire bolts complete in all respects as per the directions of Engineer Incharge |
| 22 | Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:-(a) White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer |
| 23 | Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings. |
| 24 | Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including paintingof fittings and brackets, cutting and making good the walls and floors wherever required :W.C. pan with ISI marked white solid plastic seat and lid |
| 25 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 :15 mm nominal bore |
| 26 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:893115mm nominal bore |
| 27 | Providing and fixing P.V.C. waste pipe for sink or wash basin includingP.V.C. waste fittings complete Flexible pipe 32 mm dia each |
| 28 | Providing and fixing 100 mm PVC pipeSSgrating (anti cockroach type) for gully trap. |
| 29 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. |
| 30 | Providing and fixing toilet paper holder :C.P. brass each |
| 31 | Providing and fixing pvc connections for wash basin, geyser, flush tank with all necessary fittings. Complete job |
| 32 | Providing and fixing 110mm dia PVC soil waste & vent pipes including jointing & collars. Complete Job |
| 33 | Providing and fixing 75mm dia PVC soil waste & vent pipes including jointing & collars. Complete Job |
| 34 | Providing and fixing 75mm dia PVC collar ncluding jointing & collars. Complete Job |
| 35 | Providing and fixing 110 mm dia PVCincluding jointing & collars. Complete Job |
| 36 | P/F of 110mm PVC plain bend of required degree with acess door inclusive of 3mm thick bitumastic felt washer & cost of jointing etc. Complete Job |
| 37 | P/F of 75mm PVC bend of required degree with acess door inclusive of 3mm thick bitumastic felt washer & cost of jointing etc. Complete Job |
| 38 | P/F of C P Brass basin mixer/sink mixer 15mm dia of approved brand, quality. Complete |
| 39 | Providing and fixing CP Brass Single lever telephonic wall mixer of quality & make as approved by Engineer in charge.15 mm nominal dia |
| 40 | P/F of C P Brass health faucet 15mm dia of approved brand, quality. Complete with extension and holder |
| 41 | Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms. |
| 42 | Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour.450 mm long towel rail with total length of 495 mm, 78 mmwide and effective height of 88 mm, weighing not less than170 gms |
| 43 | P/F of air cap for 75 mm soil waste pipe. Complete job |
| 44 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes confirming to IS:15801, UV stabilized & anti - microbial fusion welded, having thermal stability for hot & cold water supply, including all PP - R plain & brass threaded polypropylene random fittings and fixing the pipe with clamps at 1.00 m spacing. This includes the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge. Concealed work,including cutting chases and making good the wall etc .PN - 16 Pipe, 25 mm OD (SDR-7.4) |
| 45 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes confirming to IS:15801 UV stabilized & anti - microbial fusion welded, having thermal stability for hot & cold water supply, including all PP - R plain & brass threaded polypropylene random fittings, including trenching,refilling & testing of joints complete as per direction of Engineer-in-Charge.External work PN - 16 Pipe, 32 mm OD (SDR-7.4) |
| 46 | Construction of soakage pit by way of providing & fixing pre cast reinforced cement concrete rings of 900mm internal dia of Specified thickness with top RCC cover including handling hoistiong fixing in position & jointing with 10mm thick cement mortar 1:6 upto required depth incl cost of necessary excavation as per the requirement & disposal of excavated soil as directed. Complete Job |
| 47 | Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with PVC cover , inside & outside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design : (Size 45x30x60 cm) |
