Tender For Drawing Lt Abc At Kodangavila, Parambuvila And Sasthamthala Under Electrical Section Kamukinkode - Drawing Lt Abc 2 Transportingltabcbyhiredvehicletoadistanceupto5kmand Carring Up To 2 Drum Including Loading And Un Loading Using Crane 3 Str, Thiruvananthapuram-Kerala

Tender For Drawing LT ABC at Kodangavila, Parambuvila and Sasthamthala under Electrical Section Kamukinkode - Drawing LT ABC 2 TransportingLTABCbyhiredvehicletoadistanceupto5kmand carring up to 2 drum including loading and un loading using crane 3 Stringing of 1.1 kV Aerial bunched cable of size 3 x 70 + 1 x 16+1x 50 sqmm with bare/insulated Messenger through existing poles 4 Stringing of 1.1 kV Aerial bunched cable of size 1 x 25 + 1 x 25 sqmm with bare/insulated Messenger through existing poles 5 Redoingsinglephaseserviceconnectionincludingloweringdownthe guy wire portion repairing/changing WP wire and reconnecting the same including conveyance of material to site from section office at various 6 Dismantling(withoutdamage)onekmLT3ph4wireOHline,cross arms, insulators and stacking the conductors in rolls. 7 Dismantling(withoutdamage)onekmLTadditionalconductorline, cross arms, insulators and stacking the conductors in rolls. 8 Dismantling(withoutdamage)onekmLTSph2wireOHline,cross arms, insulators and stacking the conductors in rolls. 9 Erecting one LT PSC Pole in position incl. digging & back filling pit. 10 Loading LT PSC pole from the stacking place and unloading the same at work site (transport by vehicle). 11 ProvidingoneCoilEarthusingGIearthwire,diggingseparatepitat standard distance away from the pole/structure & backfilling. 12 Providing one Earth using earth pipe incl. digging separate pit at standard distance away from the pole/structure & backfilling. 13 InstallingOneNo.4waySatelliteConnectorofsizeMain:16to95, Tap:4 to 35 Sq.mm to the LT AB cable of Standard size 14 Installation of Insulation piercing connector for main to service line main :16-95 sqmm, Tap 16-95 sqmm 15 Installing One No. Insulation piercing connector of size Main :16 to 95,Tap:1.5 to 16 Sq.mm 16 Erection of Anchor clamp / dead end clamp for LT ABC of any size 17 Erection of suspension clamp for LT ABC of any size 18 Providing Cable Tie 19 Providing End Caps 20 Providing Stay for LT poles incl. digging & back filling pit. 21 Renewal of existing damaged/broken old LT stay with existing stay rod. 22 Installation of Pre-insulated straight through joints for 50sqmm cable 23 Installation of Pre-insulated straight through joints for 70sqmm cable 24 Installation of Pre-insulated straight through joints for 16sqmm cable 25 Transporting poles by hired vehicle to a distance upto 5km and carrying upto 4 poles excluding loading & unloading. 26 Dismantling (without damage) one LT PSC/RCC Strut pole incl. removal of clamps and stacking. 27 Dismantling one damaged LT PSC/RCC pole after disconnecting stays, strut etc. and stacking the same. 28 Fitting and erecting one HT A type Pole in position incl. fitting cross arm, digging & back filling pit, drawing earth leads. 29 Additional rate for excavation of one Pit for HT Pole/HT Stay in Hard Laterite. 30 Insertion of one HT PSC pole in existing HT/LT line incl. digging & back filling pit, fitting cross arm, insulator, binding etc. 31 Renewal of existing damaged/old 11kV PSC/RCC Pole with new A type pole in place and refitting of all items incl. conveyance (except pole). 32 Loading HT PSC pole from the stacking place and unloading the same at work site (transport by vehicle). 33 Loading HT A type pole from the stacking place and unloading the same at work site (transport by vehicle). 34 Fitting of one No. pole top service connection box of standard size (up to 4 way) using ss strap/B&N of suitable size in to the PSC/A poles at the standard height excluding giving connections 35 Dismantling and reconnecting Sph service connection from the OH line incl. lowering down the WP portion. 36 Dismantling and reconnecting 3ph service connection from the OH line incl. lowering down the WP portion. 37 Dismantling 3 line spacer on the existing LT OH line 38 Dismantling 2 Line spacer from existing OH Line 39 Dismantling one ordinary street light/CFL/LED fitting from existing pole and refitting the same on newly erected pole and reconnecting. 40 Fitting one additional Fuse unit and giving connection from Transformer to fuse and DB to LT OH line. 41 Fitting one No. Section fuse on LT line with dropping cables, crimping sockets, connecting with bolt&nut etc. 42 Straightening one Slanted LT pole after unbinding the line and rebinding the line after work. 43 Pole numbering using printed Aluminium sheets / Painting the surface of pole with anti algal yellow paint and painting Letters with black paint as specified incl. cost of paint. 44 Additional rate for excavation of one Pit for LT Pole/LT Stay in Laterite. 45 Transporting one LT PSC pole by Head load for an average distance of one km (limited to 0.3km). 46 Providing Strut using LT PSC pole incl. digging & back filling pit.

Sr No	CorrigendumDate	Corrigendum	CorrigendumType	NewSubmissionDate
1	18-07-2025	Date extension	Date	23-07-2025

INR 2360 /-

INR 9.75 Lakhs /-