Tender For Periodical Services Of Md / Otm Accn And Other Maintenance Works At Cabs, Ins Tanaji, Nofra And Nsb Under Ge (Nw) Mankhurd
Tender Value
Ref. Documents
Estimated cost
Bid Submission
31 Jul 2025
0 days left
EMD
1 Lakhs
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
mankhurd → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Periodical Services Of Md / Otm Accn And Other maintenance Works At Cabs, Ins Tanaji, Nofra And Nsb Under Ge (Nw) Mankhurd
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 16-Jul-2025 | Corrigendum | BOQ | 31-Jul-2025 |
BOQ
| Sl. No. | Item Description |
| 1 | M&L non skid colouredceremic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, as in floorsoverscreed bed or bedding layer of morar 15 mm in cement mortar 1:6 set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaceincl dismantlling floor herth or wall tiling incl removal of cement mortar bedding (but not backing) removing serveable tiles store & rubbishcomplete all as specified and as directed. |
| 2 | M&L non skid colouredceremic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, as in floorsoverscreed bed or bedding layer of morar 15 mm in cement mortar 1:6 set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface incl dismantlling floor herth or wall tiling incl removal of cement mortar bedding (but not backing) removing serveable tiles store & rubbishcomplete all as specified and as directed. |
| 3 | M&L for Glazed ceramic colour tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to matchincluding 10 mm thick rendering CM 1:4incl dismantlling floor herth or wall tiling incl removal of cement mortar bedding (but not backing) removing serveable tiles store & rubbishcomplete all as specified and as directed. |
| 4 | M&L for Providing 300x300x 7-8 mm thick non skidDigitaldark colouredTiles as infloorsoverscreed bed or bedding layer of morar 20 mm in cement mortar 1:6 set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface incl dismantlling floor herth or wall tiling incl removal of cement mortar bedding (but not backing) removing serveable tiles store & rubbishcomplete all as specified and as directed. |
| 5 | M&L Digital colouredwall tilingof 300x600x 7-8 mm thick wall tiling on vertical surfaces, skirting/dados etc. overscreed bed or bedding layer of mortar 15 mm in cement mortar 1:4 set and jointed in neat cement slurry and pointed in white / coloured cement to match the surface incl dismantlling floor herth or wall tiling incl removal of cement mortar bedding (but not backing) removing serveable tiles store & rubbishcomplete all as specified and as directed. |
| 6 | S&F Vitrified light shadeceramic tiles 10 mm thick (square/rectanglar)polished area of each tile not exceeding0.36 sqm ,in floors etc., set and jointed in neat cement slurry and pointed in white or Coloured cement to matched laid over 15mm thick badding layer of CM 1:6 incl dismantlling floor herth or wall tiling incl removal of cement mortar bedding (but not backing) removing serveable tiles store & rubbishcomplete all as specified and as directed. |
| 7 | DittoAll as per itemNO 6 but as in skirting /dado laid over 10 mm thick badding layer of CM 1:4 incl dismantlling floor herth or wall tiling incl removal of cement mortar bedding (but not backing) removing serveable tiles store & rubbishcomplete all as specified and as directed. |
| 8 | M&L for rendering 15mm thick on fair faces of bricksor concrete surface work in CM 1:6, finished the surfaces even & smooth with sagol finish including taking down cement or cement lime plaster of any description on brick or stone walls, including raking out joints, hacking for keys, scubbing down with water, etc.complete all as specified. |
| 9 | M&L for preparing new plastered surface of walls,and applying two coat of Distemper oil emulsion over a coat of putty 3mm thickcomplete all as specified and directed |
| 10 | Demolition of stone slabs and tiles laid beded and pointed in any mortar of any description or thicknes in floors , aprons etc |
| 11 | M & L for Machine cut cudappah stoneslab18-20mm thick over cementscreed base, laid and mixedwith pigment to match the shade of the slabwindow cills and jambs to full thickness of wall fixed in steps over cement screed bed 10mm thick in CM 1:4 and jointed with grey cement paste and slurry including rubbing and polishing complete all as specified and directed. |
| 12 | M&L 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. overscreed bed or bedding layer of morar 15 mm in cement mortar 1:4set and jointed in neat cement slurry and pointed in white or coloured cement to match Colour is approved by GE. |
| 13 | M&L Machine cut pre polished kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing overscreed bed or bedding layer of morar 20 mm in cement mortar 1:6 complete all as specified and as directed. |
| 14 | M & L forfilling of lean concrete 1:5:10 type E2 (using 40 mm graded stone aggregates ) in sunken portion, as per requirement,including demolition of lime concrete or lean concrete from sunken floor and disposing off debris outside MD land,complete all as specified and directed. |
| 15 | M & L for special treatment for sunken portion of WCs/Bath & toilet etc executed in following stages :Stage 1:Providing 15mm thick plaster in CM 1:3 mixed withwater proofing chemical of Dr.Fixit or Shalicrete \"R\" of STP Ltd in the proportion/quantity all as per manufacturer\"s instructions.State 2 : Primer-Mix Tarfelt LM of STP Ltd (diluted with water in ratio 1:1) @ 250 gms/sqm and apply the primer on the plastered surfaces.Stage 3 : Application of 1st coat of Tarfelt LM of STP Ltd (without dilution with water) @ 1Kg/Sqm by brush all as per manufactuer\"s instructions.Stage 4:Laying fyber glass cloth (weight not less than 50gram/ Sqm) over the 1st coat while the coated surface is still sticky. |
| 16 | Stage 5:After 6 to 7 hours interval, apply second coat i.e. final coat of Tarfet LM of STP Ltd (without Dilution with water) @ 1kg/ Sqm by brush as per manufacturer\"s instructions.Stage 6:Providing 10mm thick protective plaster in CM 1:3 mixed with STP No. 1 @ 250ml/50 Kg cement all as per manufacturer\"s instructions.Stage 7: Carryout ponding test for 48 hours to ensure water tightness of repaired sunken portion. NOTES :(i)Mode of measurement: Actual area treated (floor and adjoining walls) will be measured and paid .(ii) The above treatment shall be got executed through applicator of manufacturer and necessary authenticated documents on account of above shall also be produced by the contractor. |
| 17 | Taking down shutter of any description exceeding One Square Metre and not exceeding Two Square Metre each complete all as specified and as directed. |
| 18 | Taking down chowkhat or frame (without taking off shutter from the frame)not exceeding 1.5 Square Metre each , removing from the site including cutting holes required fortaking out existing hold fast etc. complete all as specified and as directed. |
| 19 | All as per serial Item No 17 herein above but exceeding 1.5 Square Metre and not exceeding 04 Square Metre each complete all as specified and as directed. |
| 20 | M&L Brick work with sub class ‘B’ bricks, straight or curved on plan exceeding 6 metre means radius built in cement mortar 1:6 includingdDemolition of brick work or stone/boulder, masonry, built in cement mortar or cement lime mortar including all quoins, archescomplete all as specified and as directed. |
| 21 | M&LPCC (1:2:4) type B1 using 20 mm graded stone aggregate as inhold fast, bed plate etc including necessary form work complete all as specified and as directed. |
| 22 | S&F Mild steel work as in band, straps, supports for RWP, clamps, hold fasts, wall ties, , hooks & pintle hinges and similar small articles conformingto Fe-290-0 or Gde E-165 |
| 23 | Supply & Fixing 2nd class hard wood plain ,solid straight chowkats and frames of wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints. |
| 24 | S&Ffor 35 mm thick flush shutters, solid core construction with blockboard core and plywood face panels, commercial type on both sides and fitted to chowkhats complete all as specified and as directed. |
| 25 | S&F 35 mm thick Plain, framed, paneled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of 12 mm thick veneered particle board medium density, wood particle board with commercial face veneers on both faceswith Seesham wood beading all round the panel made out of 20 by 15 mm , on one side and fitted to chowkhats complete all as specified and as directed. |
| 26 | S&F Glazed and Skelton shutters, 35 mm thick of Second class hard wood open rebated and prepared to receive glass, gauge etc without sash bars) edges of framing plain chamfered or rounded, fitted with cut and mitred beads for securing glass, etc, sizes of members of shutters asspecified in SSR Part-I, Section 8, clause 8.24(a) (Door Shutters) complete all as specified and as directed. |
| 27 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 50 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant as per specifications drawing as directed by the Engineer - in -charge . Material test certificate and authentication should be compulsory provided by the manufacturing company.and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). ® Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 28 | S&F for Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flushdoor shutter of size 35mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer- In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) |
| 29 | Supply & Fixing solid PVC door frame of size50 mm x 47 mm made out of 5 mm plain colour PVC sheetreinforced with MS square tube, fixed in opening as per specification & drawings complete all as specified and as directed. |
| 30 | M&L for factory made solid PVC panel type PVC door shutter 30mm thick consisting of frame made out of MS tubes for top and bottom rails MS frame shall be covered with moulded plain colour PVC \"C\" channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rails, paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent supplying and fixing in the frame at site as per specifications and drawing given under SSR Part II 2010 complete all as specified and directed. |
| 31 | S&F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples |
| 32 | S&F 100 mm size stainless steel butt hinges medium weight fixed with stainless screw |
| 33 | S&F aluminum anodised barrel tower bolts of extruded section of size 150 mm length |
| 34 | S&F Aluminium handle, cast type anodized size of handle 150 mm complete all as specified and as directed. |
| 35 | S&F Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixedlength of bolt 250 mmcomplete all as specified and as directed. |
| 36 | S&Ffor aluminium (Die cast body)hydraulically Door closer regulated, designation No. 1, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg and fixed as in repairs. |
| 37 | M&L in repairs for Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed includind taking downand refixing of shutter |
| 38 | M&L Preparation of new or untreated painted wood andwooden based surfaces of any description not other wise described over 10 centimetre width or girth and applying Two coats of synthetic enamel paintover a coat ofpink primer complete all as specified and as directed. |
| 39 | Dismantling wrought iron or mild steel work of any description not otherwise provided for |
| 40 | S & F Rolled Mild Steel Framed work as in doors or Gates of angle or other section confirming to Fe 410 - S, with gusset plates, rails braces, etc., complete, drilled for fixing of steel sheeting or other covering and hanging and fixing complete. |
| 41 | S&F mild steel work as in posts or struts of fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc, including all necessar drilling, bolting or riveting etc conforming to Fe- 290 Gde E-165. |
| 42 | S&F Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates Fe 410 gde E |
| 43 | S & F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strengthof 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screwsincluding dismantling Asbestos cement (corrugated, semi corrugated, etc sheets in roof coveringscomplete all as specified and directed. |
| 44 | S& F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in ridges, hips, valley gutters, fixed with self tapping screwsincluding dismantling Asbestos cement (corrugated, semi corrugated, etc sheets in roof coverings as specified |
| 45 | S&F 10.00 mm thick polycarbonate sheets of superior quality in semi circle shape on roofs of desired colour and fixed with aluminium metal flat/angle/tee sections including rubber beadings and silicon water proofing sealent jell for joining the sheets together and self tightening screws of reputed quality and make complete all as specified and directed |
| 46 | Taking down carefully existing aluminium sliding window shutters, taking down of existing stainless steel wire mesh from aluminium sliding window shutters including existing rubber gasket complete, supply and fixingstainless steel wire mesh of dia 0.36 mm and average width of aperture 1.40 mm with and including provision of \"U\" clip, re-fixing the shutters in existing position, complete all as specifiedand directed. |
| 47 | Taking down existing aluminium joinery of any description (frame/ shutters) with all fittings (but excluding grills) complete all as specified and directed. |
| 48 | S&F standard aluminum section powder coated in partition / frame and door shutter, sliding windows / ventilators and places otherwise not specified cut to size, jointed with cadmium plated steel screws, including rubber beading or gaskets for fixing glass or wire cloth or Bakelite sheet and all necessary fittings, hinges, screws, plugs, locking arrangements for windows, Nylon ball bearing etc completed all as specified and directed (Aluminum section shall be of make Jindal / Hindalco / Indalco).Note :- Weight of Aluminum sections for frames and shutters shall be only considered for payment.Cost of other consumables required for the item shall be deemed to be included in the quoted rate.However glass panes / Bakelite sheet / wire cloth / mortice lock / locking stay / floor spring / floor door stopper only will be measured and paid separately under respective items as supply only.Fixing by element of these items shall be deemed to be included in quoted rate. |
| 49 | Supply only stainless steel wire cloth of 0.36 mm nominal dia of wire and average width of aperture 1.40 mm , fixed in aluminium windows complete all as specified and directed. |
| 50 | Supply only 4.80mm thick glass ordinary quality plainnot exc 0.5 Sqm each pane withincluding wooden/rubber beading or gasket for aluminium sectioncomplete all as specified. |
| 51 | Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard sectionand fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixingapproved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineerin- charge. |
| 52 | S&F Anodised aluminium sanp grid (size 605x605mm )frame work for falseceiling and hangers 6mm dia. GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 x 3mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long and Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre incl dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets.complete all as specified |
| 53 | Supply 12 mm thick prelaminated particle, board, interior grade, prelaminated both sides with decorative choice laminations, fixed with screws to aluminiumframe work incl dismantling boarding any descriptionfixed in any position with nails complete all as specified. |
| 54 | S&F 18/19 mm thick prelaminated partcile boardboth sides , interior grade , of approved shade and pattern fixid with screws to timber frame for any work and all necessaryfittings (hinges , scrowes , beeding piecehaspstaple ),incl dismantling boarding any descriptionfixed in any position with nails complete all as specified . |
| 55 | S&F continuous (piano) hinges, width of flap 30mm (when open), mild steel, bright finish or electro-galvanised, complete all as specified and directed. |
| 56 | S&F 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls all complete all as specified and directed. |
| 57 | _dittio_ all as per item No 55 above but 75mm bore |
| 58 | S&F 110mm bore PVC (SWR) branch piece single (Single Y ) equal or unequal |
| 59 | S&F 110mm bore PVC (SWR) bend |
| 60 | S&F 75mm bore PVC (SWR) bend |
| 61 | S&F 75mm bore PVC (SWR) branch piece single (Single Y ) equal or unequal |
| 62 | S&F in repairs Steel rolling shutters, 1mm thick of laths with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete; push pull or manual type including taking down old rolling shutter any type complete all as specified and as directed |
| 63 | S & F Ball bearing for rolling shutters as specified. |
| 64 | M& L for preparation of new steel and iron surfaces of any description , over 10cm in width or girth not otherwise described and applying two coats of synthetic enamel paint over a priming coat of red oxide zinc chromecomplete all as specified and directed. |
| 65 | M&L forPCC (1:2:4 ) type B-1 using 20 mm graded crushedstoneaggregate as in levelling courses over RCC roof surface to achieverequiredslope including rounded or chamfered edges including mixed with water proofing compound @ 3% by weight of cement and finishing surface even and smooth using extra cementetc including demolition of plain cement concrete (unreinforced) in roofs, including all necessary scaffolding /staging for working at any heights upto and including 24m as required and disposing off the rubbish to a distance exceeding 500m and not exceeding 1.0km complete all as specified (NOTE :-The rate of WPC is deemed to be included in this item. Hence bidders quoted the rate accordingly) |
| 66 | M & L for 10 mm thick plaster in cement and sand mortar (1:3) finished even and smooth without using extra cement including mixed with WPC @ 3% by weight of cement over roof/ terrace surfaces, complete all as specified and directed.Note: The rate of WPC is deemed to be included in this item. Hence bidders quoted the rate accordingly |
| 67 | M & L for 3 mm thk APP modified roof treatment over existing roof slab etc to be executed through approved authorised applicator of the membrane manufacturer with the following specifications including dismantling / taking out existing water proofing treatmentcomplete all as specified and directed:-(a) Applying oil bound bitumen primer @ 0.40 litre/ Sqm manufactured by the same manufacturer as that of APP with a density 0.87-0.89 Kg per litre at 25 degree centigrade on the prepared dry surface.(b) Laying APP modified water proofing membrane reinforced with non woven polyester fibre weight not less than 160gm/Sqcm using butane torch by torchapplication with 10cm side lap and 15cm end lap. |
| 68 | (c) Physical properties of membrane shall be as under:- (i) Membrane weight not less than 3.50 Kg/Sqm.(ii)Non woven polyester weight not less than 160gm /sqm.(iii) Softening point of membrane not less than 150 degree Celsius.(iv)Joint tensile strength-longitudinal not less than 650N/Sqcm and transverse not less than 450 N/Sqcm(v)Tear strength-longitudinal not less than 300 N & transverse not less than 250 N. (vi)Elongation : > 20% in both directions. (vii)Impermeability/water tightness at 2 Kgf/cm2.(viii) Water absorption - Not more than 1% on mass within 24 hours.(ix)Cold flexibility - Minimum (-) 20C.(x) Dimentional stability % change = Maximum 1%. (xi) thickness of memberane shall not less than 3 mm. Note The rate of bitumen primer is deemed to be included in this item. Hence bidders quoted the rate accordingly |
| 69 | M&L Providing and injecting chemical emulsion for Post Constructional Anti-termite Treatment along external wall where the apron is nor provided using chemical emulsion at the rate of 7.5 litres per sq.m of the vertical surface of the sub-structure to a depth of 300mm including excavating channel along the wall and rodding etc. complete |
| 70 | At points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ .5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150 mm centre to centre and sealing the same |
| 71 | Disconnecting existing water storage tanks, setting aside (or lowering if required) for repairs to roof below, and replacing (or hoisting if required), re-fixing in position and re-connecting on completion of roof work complete all as specified and directed by the Engineer-in-charge for the following capacities: |
| 72 | (a) upto and including 1000litres |
| 73 | (b) 1000 litres upto and including 2000litres |
| 74 | M & L Rendering 10 mm thick on fair faces of brick work or concrete surfaces using CM 1:6, finished the surface even and smooth with sagol finish including all necessary scaffolding as required incl taking down cement or cement lime plaster of any description on brick or stone walls, including raking out joints, hacking for keys, scrubbing down with water all as specified and as directed. |
| 75 | M & L Rendering 5 mm thick on fair faces of concrete surfaces using CM 1:3, finished the surface even and smooth in ceiling including all necessary scaffolding as required incl taking down cement or cement lime plaster of any description on brick or stone walls, including raking out joints, hacking for keys, scrubbing down with water all as specified and as directed. |
| 76 | M&L for20mm thick polymer modified ready mix cement based plaster in two layers (12 + 8 mm) on the wall surfaces, top layer of 8 mm including mixed with liquid water proofing compound in the proportion as per manufacturer’s instructions and including finishing the surfaces of the top layer even and smooth, including scaffolding as required complete all as specified and directed, Make : Easy plast from M/s wall plast or chemplast or Readiplast from ultratech.Notes : (i) The thickness of plaster specified above is the minimum thickness and the quoted rates shall also be deemed to include for provision of dubbing of the surfaces with the ready mix plaster and nothing extra shall be payable on this account. (ii) The rate of WPC is deemed to be included in this item. Hence bidders quoted the rate accordingly. |
| 77 | M & L for preparing new decorated surfaces of wall (plasterered or unplastered or previously white washed) & applying two coat of oil bound distemper with 3mm thick wall care putty including all necessary scaffolding as required complete all as specified. |
| 78 | M&L for preparation of newly plastered surfaces ofceilingsand applying one coat of primer and two coats of distemper oil emulsion including all necessary scaffolding as required complete all as specified. |
| 79 | Material & Labour for applying One or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10sqm over new surfaces including all necessary scaffolding as required complete all as specified and directed. |
| 80 | M&L Preparation of oldplastered or un-plastered surface of ceiling and applying one coat of oil bound distemper complete all as specified and directed. |
| 81 | M&L Preparation of oldplastered or un-plastered surface of wallby scraping, washing rubbbing etc and applyingtwo coat of distemper oil-emulsion complete all as specified and directed. |
| 82 | M& L for preparing oldsurfaceswallsof distempered & painted surfacesby scraping, washing rubbbing etc and applying one coat of oil bound distemper complete all as specified |
| 83 | M& L for 3mm thick wall care putty on wall/ceiling (brandApex Ultima manufactured by Asian or Brand weather coat Maxx manufactured by Berger or equivalent as approved by GE) building ht upto 24mtr including necessary scaffolding andcomplete all as per manufacturers instructions |
| 84 | M& L preparation of old painted wooden surface of any description not other wise described , over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified |
| 85 | M& L preparation of old painted steel surface of any description not other wise described , over 10cm width or girth and applying one coat of synthetic enamel paint over a coat of red oxidezinc chrome primer complete all as specified |
| 86 | M&L for preparation of existing old surfaces of wall, chajjas, beams, parapets etc, filling of cracks after cutting the same to V shape approximate 10mm wide and upto full depth of cracks with Chemistic crack seal caulking compound (Acrylic sealant) of M/s. Chemistik or equivalent of Dr. Fixitor of M/S STP Ltd as approved by the GE, also including necessary scaffoldings etc, complete all as specified and directed. |
| 87 | M&L for leak/seapage proof coating consisting of preparing the surfaces of Newly plasteredorexisting exterior walls, parapet walls chajjas etc, with wire brush to remove all loose dirt, oil grease etc, and filling cracks above 5mm thickness with Dr Fixit Pidicrete URP or with plaster seal of STP Ltd and cracks less than 5mm with Dr FixitCrack X powder or with plaster seal of STP Ltd and applying one coat Dr Fixit primeseal primer or STP Ltd (and allow to dry for 8 hrs) under torch dry condition and subsequently two coats of water proof decorative elastomeric coating system; of Dr Fixit Raincoat with DFT 100 microns or shalicry 215 of STP(The surface after painting one coat shall be allowed to dry at 6 hours befor next coat) etc, complete all as per manufacturer instruction and all as specified and directed. |
| 88 | Removing plant/growth including its roots upto 1.00m of plant height at any location/at any storey and of any description and treating the surfaces with Acid (HCL) and making good surfaces with cement mortar 1:4, complete all as specified and directed. |
| 89 | Writing letters or figures (Block.Roman, Italic or Indian) n exc. 30 cm high complete including all necessary scaffolding as required all as specified and directed. |
| 90 | Note : A SUM OF RS 32635.00 TOWARDS SCHEDULE OF CREDIT SHALL BE DEDUCTED TO ARRIVE THE CONTRACT SUM |
AI Tender Summary
Tender Timeline
Jul 16, 2025
11:30 IST
Tender Published
Tender notice published.
Completed
Jul 31, 2025
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
CompletedJul 31, 2025
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedAug 02, 2025
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender