}

Tender For Providing And Fixing Of One 10 Hp Sewage Submersible Standby Pump-Set And Allied Works At Rama Park Sps In Uttam Nagar Constituency, Ac 32. - 1 Lt Distribution Panel Sheet Steel Enclosure Made Out Of 2Mm Crca Sheet Totally Enclosed, Powder Co, janakpuri-Delhi

Delhi Jal Board has published Tender For Providing And Fixing Of One 10 Hp Sewage Submersible Standby Pump-Set And Allied Works At Rama Park Sps In Uttam Nagar Constituency, Ac 32. - 1 Lt Distribution Panel Sheet Steel Enclosure Made Out Of 2Mm Crca Sheet Totally Enclosed, Powder Co. Submission Date for this Tender is 16-07-2025. Submersible Pump Tenders in janakpuri Delhi. Bidders can get complete Tender details and download the document.




Tender Notice

50104159
Tender For Providing And Fixing Of One 10 Hp Sewage Submersible Standby Pump-Set And Allied Works At Rama Park Sps In Uttam Nagar Constituency, Ac 32. - 1 Lt Distribution Panel Sheet Steel Enclosure Made Out Of 2Mm Crca Sheet Totally Enclosed, Powder Co
Tender
Indian
Delhi
Janakpuri
16-07-2025

Tender Documents

Tender Details

Tender For Providing And Fixing Of One 10 Hp Sewage Submersible Standby Pump-Set And Allied Works At Rama Park Sps In Uttam Nagar Constituency, Ac 32. - 1 LT Distribution panel sheet steel enclosure made out of 2mm CRCA sheet totally enclosed, powder coated free standing, floor mounted type, dust& vermin proof, outward opening, lockable doors having hidden hinges and a bolted back cover both using non-deteriorating neoprene rubber gaskets to provide IP-54 protection. Each part of the fabricated panel will be strictly subjected to seven tank treatment. The various components, assemblies and sub equipment’s of the panel will be as per standard given in relevant IS. The bus bar of the panel will be shaped out of high conductivity, electrolytic conductor and shall be liberal sized in aluminium. The control wiring of the panel will be done with PVC flexible copper wires of 1.5mm cross section. Each wire will be terminating with a ferule crimped to the wire, size 1000x1000x350 mm. Having following components of approved make. i) MCCB 415V, 4P 3phase, 36KA,50Hz, 200Ampwith spreader & Handle. Make-L&T/Havells- 01 No.ii) On load Changeover 160 Amp. Make :- L&T/Havells – 01 No.iii) Digital Volt Meter Make – L&T/Havells – 01 No.iv) MCCB 415V, TP 3phase, 36KA, 50Hz, 63Ampwith spreader & Handle. Make-L&T/Havells- 02 No.v) Digital Amp Meter. Make – L&T/AE ---02 Nos. vi) Contactor 32 Amp 3P. Make – L&T/Havells- 06 Nos.vii) Over load relay 16-44 Amp. Make – L&T/Havells -02 Nos.viii) Current Transformer100/5 Make AE /Advance/DJB approved makes. – 06 Nos.ix) Current Transformer60/5 Make AE /Advance/DJB approved makes.– 06 Nos.x) Electronic timer S/D. Make – L&T/Havells- 01 Nos.xi) Push Button, Start/Stop. Make – FTC/L&T-04 Nos.xii) LED Indicating lamps. Make – FTC/L&T-09 Nos.xiii) MCB for Control circuit protection 6A/16A, SP. Make – Schneider/L&T/Havells-06 Nos.xiv) Motor Protection Relay(OV/UV/SPP/PH SEQ/UBC). Make – L&T/Havells - 01 Nos. 2 Supply of sewage submersible pump-set of 10 HP suitable for handling muddy water containing sand & silt, etc. The pump shall be suitable for operation on three phase 415V AC supply having RPM 1450 with delivery size 100 mm dia. with SS 304 impeller, SS shaft, TC/TC Mech. Seal, Dry type Motor with 10 mtrs cable having Head 10 mtrs., discharge 150-180 m3/hr.Make :- Aqua/Skope/Mody/DJB approved makes. 3 Supply of MS Pipe 100 mm. Make :- TATA/Jindal Hisar/ DJB approved makes. 4 Supply of Sluice valve 100 mm, PN 1.0. Make :- IVC/ AV/MARCK/HAWA/ Kirloskar/DJB approved makes. 5 Supply of Non Return valve 100 mm, PN 1.0. Make :- IVC/ AV/MARCK/HAWA/ Kirloskar/DJB approved makes. 6 Supply of 3x10 sq. mm Multicore round PVC insulated and FR PVC round sheathed, copper conductor (flexible) industrial cable.Make :- Hevells/Grandley/Gloster/DJB approved makes. 7 Dismantling the existing damaged/rusted delivery MS line ofSub pumpsets after isolating the electric supply from the LT Panel . Work including arranging all tools and tackles such as gas cutter, welding machine, grinder, etc required to remove/cutting the rusted Nut & bolts and lifting the same with the help of heavy manual labour/hydra. 8 Fabrication of 100 mm dia. MS Pipe by welding, cutting, etc as per site requirement. Work includes welding the flanges on the 100 mm dia MS Pipe as required with the help of all T&P items required to complete the job. 9 Installation and fixing of the one New and other existing submersible pump-sets by jointing the pump with 100 mm dia MS delivery fabricated line with the help of heavy manual labour/hydra. Fixing of new Valves at delivery sides, with the help of nut & bolts, packing, etc. as required to complete the job. The job also include making connection of delivery line to existing delivery by fixing gap piece/lead joint, etc as per site requirement and laying of existing cable, making connection the motor from starter/panel etc. i/c watch and ward, cartage , loading and unloading taking all safety precaution arrangement, all tools and tackles. The work including testing and commissioning all E&M equipment i/c pump and motor at no load and full load.

Key Value

Document Fees
INR 500 /-
EMD
INR 13200.0 /-
Tender Value
Refer document

Attachment

FileName File Description File Size
Click here to download tender document Tender Documents 0 KB
Click here to download tender document Tender Documents 0 KB
Click here to download tender document Tender Documents 0 KB
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail