}

Tender For Repair And Maintenance Of Infrastructure Assets In R Iii Division During 2025 26. Sh Raising Of Manholes At Africa Avenue Road And Some Miscellaneous Work In R-Iii Division. - 1 Earth Work In Excavation By Mechanical Means (Hydraulic Excavato, delhi-Delhi

New Delhi Municipal Council has published Tender For Repair And Maintenance Of Infrastructure Assets In R Iii Division During 2025 26. Sh Raising Of Manholes At Africa Avenue Road And Some Miscellaneous Work In R-Iii Division. - 1 Earth Work In Excavation By Mechanical Means (Hydraulic Excavato. Submission Date for this Tender is 18-07-2025. Infrastructure Work Tenders in delhi Delhi. Bidders can get complete Tender details and download the document.




Tender Notice

50104123
Tender For Repair And Maintenance Of Infrastructure Assets In R Iii Division During 2025 26. Sh Raising Of Manholes At Africa Avenue Road And Some Miscellaneous Work In R-Iii Division. - 1 Earth Work In Excavation By Mechanical Means (Hydraulic Excavato
Tender
Indian
Delhi
Delhi
18-07-2025

Tender Documents

Tender Details

Tender For Repair And Maintenance Of Infrastructure Assets In R Iii Division During 2025 26. Sh Raising Of Manholes At Africa Avenue Road And Some Miscellaneous Work In R-Iii Division. - 1 Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil. 2 Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge.Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) 3 Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. In cement mortar 4 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:Cement mortar 1:4 (1 cement : 4 coarse sand) 5 Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement.12 mm cement plaster 6 Centering and shuttering including strutting, propping etc. and removal of form for(a) Suspended floors, roofs, landings, balconies and access platform 7 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.Thermo-Mechanically Treated bars of grade Fe-500D or more. 8 Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level: 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) 9 Providing orange colour safety foot rest of minimum 6 mm thick plastic encapsulated as per IS : 10910, on 12 mm dia steel bar conforming to IS: 1786, having minimum cross section as 23 mmx25 mm and over all minimum length 263 mm and width as 165 mm with minimum 112 mm space between protruded legs having 2 mm tread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138 mm as per standard drawing and suitable to with stand the bend test and chemical resistance test as per specifications and having manufactures permanent identification mark to be visible even after fixing, including fixing in manholes with 30x20x15 cm cement concrete block 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) complete as per design. 10 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) 11 Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and approved quality H D - 20 Circular shape 560 mm internal diameter 12 Desilting of drainage manhole of size 1.50mx1.20m or bigger sizeincluding malba and silt in all conditions manually by using all safety equipments such as safety belt , pre approved safety helmet, safety gogals, gun boots hand gloves, arrow flags (green and red colours) and barricade etc complete as per direction and entire satisfaction of Engineer-in-charge. 13 Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after. The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of Engineerin- charge .The elevational area of the scaffolding shall be measured for payment purpose .The payment will be made once irrespective of duration of scaffolding. Note: - This item to be used for maintenance work judicially, necessary deduction for scaffolding in the existing item to be done. 14 De-silting and cleaning of storm water drainage lines including removing all the silt from inside the pipe and repair of manhole, pipe etc. if damaged during cleaning with taking all the safety measure like using safety belt, hook an rope, torch proper working sign board on road and at the entry and exit of manhole with long handed digging tools required for de-silting the pipe complete in all respect including safe disposal of silt within municipal limits the entire satisfaction of Engineer-in-charge and cleaning of working site in all respect. The videography at each location before de-silting of RCC pipe and videography to be done after 100% cleaning/de- silting of R.C.C pipe at each location for a period of minimum 10 minutes and providing three sets of CDs of videography as directed by Engineer-in- charge. (Desilting includes all the activities includes and nothing shall be piad any respect like disposal of silt and repairing work etc). (a) For 450 mm dia. RCC Pipe. 15 Disposal of building rubbish / malba/silt / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting and unloading the same at any C&D waste management site within 25kms. lead i.e.Shastri Park/Burari/Mundka including weighting at plant etc. complete as per direction of Engineer-in-charge. weighing and unloading at the plant shall be as per procedures/rules of plantmanagement. The rates are inclusive of all operations, labours, leads and lifts from site of work to the C&D waste plant. The processing fee of C&D management at prescribed rates will be deposited by the agency and the same shall be reimbursement by the department on production of only original cash receipts.

Key Value

Document Fees
Refer document
EMD
INR 19003.0 /-
Tender Value
INR 9.50 Lakhs /-

Attachment

FileName File Description File Size
Click here to download tender document Tender Documents 0 KB
Click here to download tender document Tender Documents 0 KB
Click here to download tender document Tender Documents 0 KB
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail