Tender For Repair & maintenance of Electrical And Mechanical Services At Residential Flats / Bunglow At Rajpur Road, Civil Line, Delhi- 110054. (Sh- Ei And Other Misc Work). - 1 Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required. 2 3 Module (100mmX75mm) 3 Supplying and fixing 240 volts, C series, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and Commissioning etc. as required. 4 40 Amp Double pole 5 Supplying, Installation, Testing and Commissioning of 3 dimensional LED backlit out door type IP-66 display board in bilingual language (Hindi & English) as per approved colour and design, stainless steel i/c back side 4mm thick sun board and in the front lazar cut acrylic sheet of 3mm thick of approved quality and colour as per letter pattern having 1 to 2 collar(as per Board size) to fixed in side the SS letter and joints to be filled up with water proof silicon where ever required to make the whole structure water proof and dust proof. Providing in side the letter power LED modules each consisting of 3 Nos. LED(as per Board size) of 0.24 to 0.48 watt each(as per Board size), injection moulded module of 1.2 to 2.4 watt(as per Board size) , 75 lumen per watt, 100 mA power current, 12 volt in two rows along the periphery of each alphabet, shall be fixed in such a way to give uniform bright light to the characters letter and other accessories to be fixed on aluminium composite panel (ACP) of 4mm thick exterior grade aluminium foil not less than 0.5mm of approved brand and fixed on the MS welded structure made out of 2mm thick of 50mm x 50mm MS square pipe section with stiffeners welded vertically and horizontally in regular interval with pipe frame and the pipe frame shall be covered from the back front facia shall be covered by the ACP along with letters shall be fixed and riveted all the sides i/c wiring the entire board with specially designed power cables for power LED shall be out door grade, Appx. Size. (Actual size of Various board to be approved by Engineer-in-Charge before fixing) 6 Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. 7 In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works 8 Supplying, Installation, testing and commissioning of 8-11 Watt LED Mini Bollard fittingmade out of CRCA sheet, duly powder coated /Aluminium body, confirming to IP - 65, suitable for operation on 150 V to 270 V,(5500 to 6500K), 50 Hz AC Supply, having power factor ≥ 0.90, CRI > 80,Luminaries efficacy ≥ 70 lumen/watt , Driver efficiency > 85%, L-70 Life 50,000 burning hours. i/c CC foundation of suitable size with foundation bolt completeas required. (Note:- Contractor shall submit 5 Years gurantee certificate of respective manufacturer along with the fitting). 9 Supplying and fixing of heavy duty fully automatic motorized rolling shutter 1 mm thick GI laths sheet mounted on specially design 5 inched pipe shaft with rolling ball bearing system and heavy duty GI top cover for rolling shutter and side fixing MS Channel and 35x35x5 mm angle iron with lock plate and extra for providing of heavy duty grill made of 8 mm dia MS bar approximately 1 mtr along the entire width of shutter with one or more coat of primer and two or more core of enamel paint complete as required. 10 Supply and fixing of heavy duty fully automatic motorized rolling system with side rolling shutter motor with single phase 220 volt 50 Hz lifting height 6 mtr lifting force capacity 600 kg single phase suitable for all weather conditions precisely open and close strong power and low noise safety break up and down switch shaft, clutch and automatic system with inbuilt manual SS chain pulley system mounted on the GI rolling shutter complete as required. 11 Providing & fixing puff panel having puff with thickness of 40mm & 0.50mm GI prepainted sheet of approved colour on both sides dully pasted with puff and fixing on the existing wall with the help of self screws after cutting according to the size of enclosure etc. complete as reqd. 12 Supplying & Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required. 13 3 x 10 sqmm
