Educational and Research Institute Government Departments Closing in 0 days TDR #50103507

Tender For Cardiology And Nephrology Consumable Item , Drug Eluting Stents, Pacemakers, Ptmc Balloon And Other Consumable Items , Group – A (Interventional Cardiology) , Radial Introducer Needle18g, 70Mm Length & 20G, 40Mm – Usfda/Ce/Dcgi Approved ?Tip- S

Issued by Government Departments · kota, Rajasthan
Tender Value
39 Crore
Estimated cost
Bid Submission
14 Aug 2025
0 days left
EMD
78 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
kota → Rajasthan
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender For Cardiology And Nephrology Consumable Item , Drug Eluting Stents, Pacemakers, Ptmc Balloon And Other Consumable Items , Group – A (Interventional Cardiology) , Radial Introducer Needle18g, 70Mm Length & 20G, 40Mm – Usfda/Ce/Dcgi Approved ?Tip- Sharp Half-Moon Bevel Shape Diamond Cutting. 18 G 7 Cm 20G 4 Cm. , Iv Canula - 20G, /21G 3.2 Cm And 4 Cm – Usfda/Ce/Dcgi Approved ?Ultrasharp Electropolished Pointed Tip. Thin-Walled Construction, Radiopaque In Nature Cannula Made Up Of Clear Polyurethane. Hub Shape Round Mini Wings/No Wings With Flash Plug. 20G,21G 3.2 Cm And 4 Cm , Trans Radial Introducer Kit With Puncture Needle - 4F-7F – 7/10/15/25 Cm, Usfda/Pmda Approved ?Sizes - 4 – 7 French, Length – 7/10/15/25 Cm ?Pack Must Include 20 G/45Mm Entry Needle, 0.025-Inch X 45/80 Cm Hydrophilic Mini Guidewire. ?Must Have Etfe Sheath Tubing, Dilator Tube Should Be Made Up Of Polypropylene And Should Have Silicon Coating. ?Should Contain Haemostatic Crosscut Valve To Prevent Back Leak Of Blood And Aspiration Of Air; With Integrated Side Arm With Attached 3-Way Stopcock. ?With Suture Eye For Securing Sheath, Kink Resistant, With Snap-On Dilator-Hub Lock Mechanism To Prevent Its Back-Out. , Trans Radial Introducer Kit With Puncture Needle - 4F-7F – 7/10/15/25 Cm, Ce/Dcgi Approved ?Sizes - 4 – 7 French, Length – 7/10/15/25 Cm ?Pack Must Include 20 G/45Mm Entry Needle, 0.025-Inch X 45/80 Cm Hydrophilic Mini Guidewire ?Must Have Etfe Sheath Tubing, Dilator Tube Should Be Made Up Of Polypropylene And Should Have Silicon Coating. ?Should Contain Haemostatic Crosscut Valve To Prevent Back Leak Of Blood And Aspiration Of Air; With Integrated Side Arm With Attached 3-Way Stopcock. ?With Suture Eye For Securing Sheath, Kink Resistant, With Snap-On Dilator-Hub Lock Mechanism To Prevent Its Back-Out. , Radial Introducer Kit - Hydrophilic Cto Approachable Slender Profile 4F-7F, 6.5F -Length - 7 Cm, 11Cm, 15Cm, 25Cm – Ce Approved ?Sizes - 4 – 7 French. Must Include 6.5F Special Sheath, Length - 7 Cm, 11Cm, 15Cm, 25Cm. ?Pack Must Include 22G/45Mm Plastic Entry Needle, 0.025-Inch X 45/80 Cm Hydrophilic Mini Guidewire. ?Must Have Metal Mesh Braided Structure ?Must Have 3 Layer Sandwich Of Ptfe Sheath Tubing With Pebax Inner Layer And Ss Braid, Dilator Tube Should Be Made Up Of Polypropylene And Should Have Silicon Coating. ?Should Contain Haemostatic Crossover Valve To Prevent Back Leak Of Blood And Aspiration Of Air; With Integrated Side Arm With Attached 3-Way Stopcock. ?With Suture Eye For Securing Sheath, Kink Resistant, With Rotation-Hub Lock Mechanism To Prevent Its Back-Out During Insertion , Slender Profile Hydrophilic Sheath 5-7 F (10, 16, Cm) - Usfda/Pmda Approved ?Must Have Unique Thin Wall Technology Reducing The Outer Diameter By 1 Fr Size Whilst Maintaining The One Size Lager Inner Diameter. 5Fr In 4, 6Fr In 5, 7Fr In 6 Profile. ? Must Have 7Fr Sheath With Outer Diameter Of 2.8Mm, 6Fr With Od Of 2.46 Mm & 5Fr With Od Of 2.13Mm. ?Hydrophilic M Coating With 20/21G Surflash Needle And Tif Tip Technology Which Provide Optimal Tapering Design. , Femoral Introducer Kit 4-11F (10, 16 & 25 Cm) - Usfda/Pmda Approved • Sizes - 4 – 11 French, Length – 10, 16 & 25 Cm • Pack Must Include 18 G/20G, Surflash Entry Needle, 0.035- Or 0.025-Inch X 45 Cm Mini Plastic Guidewire • Must Have Etfe Sheath Tubing, Dilator Tube Should Be Made Up Of Polypropylene And Should Have Silicon Coating. • Should Contain Haemostatic Crosscut Valve To Prevent Back Leak Of Blood And Aspiration Of Air; With Integrated Side Arm With Attached 3-Way Stopcock. • With Suture Eye For Securing Sheath, Kink Resistant, With Snap-On Dilator-Hub Lock Mechanism To Prevent Its Back-Out During Insertion , Femoral Introducer Kit 4-11F (10, 16 & 25 Cm) – Ce/Dcgi Approved ?Sizes - 4 – 11 French, Length – 10, 16 & 25 Cm ?Pack Must Include 18 G/20G, Surflash Entry Needle, 0.035- Or 0.025-Inch X 45 Cm Mini Plastic Guidewire ?Must Have Etfe Sheath Tubing, Dilator Tube Should Be Made Up Of Polypropylene And Should Have Silicon Coating. ?Should Contain Haemostatic Crosscut Valve To Prevent Back Leak Of Blood And Aspiration Of Air; With Integrated Side Arm With Attached 3-Way Stopcock. ?With Suture Eye For Securing Sheath, Kink Resistant, With Snap-On Dilator-Hub Lock Mechanism To Prevent Its Back-Out During Insertion , Femoral Introducer Kit - Hydrophilic Cto Approachable Slender Profile 4F-18F, Length - 11Cm, 15Cm, 25Cm – Ce Approved ?Sizes - 4 – 18 French. Length - 11Cm, 15Cm, 25Cm ?Pack Must Include 18G/70 Mm Plastic Entry Needle, 0.038-Inch X 45/80 Cm & .035 For 4F Hydrophilic Mini Guidewire. ?Must Have Metal Mesh Braided Structure ?Must Have 3 Layer Sandwich Of Ptfe Sheath Tubing With Pebax Inner Layer And Ss Braid, Dilator Tube Should Be Made Up Of Polypropylene And Should Have Silicon Coating. ?Should Contain Haemostatic Crossover Valve To Prevent Back Leak Of Blood And Aspiration Of Air; With Integrated Side Arm With Attached 3-Way Stopcock. ?With Suture Eye For Securing Sheath, Kink Resistant, With Rotation-Hub Lock Mechanism To Prevent Its Back-Out During Insertion , Braided Long Sheath – 6-8F – 45Cm - Usfda/Pmda Approved ?Diameter 6,7,8F And Length 45Cm. Atraumatic Tip For Carotid & Distal Procedures ?Haemostatic Valves (Cross Cut Valve & Tbv- Detachable Valves For Thrombus Management) ?Gold Coil Marker - For Distal Visibility ?Ptfe Coating - Seamless Device Transition, Distal Hydrophilic Coated For Navigability ?Nylon Outer Layer With Reinforced Stainless-Steel Coil - Helps In Smooth & Anti-Kink Effect , Braided Long Sheath – 6-8F – 45Cm – Ce/Dcgi Approved ?Diameter 6,7,8F And Length 45Cm. Atraumatic Tip For Carotid & Distal Procedures ?Haemostatic Valves (Cross Cut Valve & Tbv- Detachable Valves For Thrombus Management) ?Gold Coil Marker - For Distal Visibility ?Ptfe Coating - Seamless Device Transition, Distal Hydrophilic Coated For Navigability ?Nylon Outer Layer With Reinforced Stainless-Steel Coil - Helps In Smooth & Anti-Kink Effect , Braided Long Sheath – 6-8F – 65Cm - Usfda/Pmda Approved ?Diameter 6,7,8F And Length 65Cm. Atraumatic Tip For Carotid & Distal Procedures ?Haemostatic Valves (Cross Cut Valve & Tbv- Detachable Valves For Thrombus Management) ?Gold Coil Marker - For Distal Visibility ?Ptfe Coating - Seamless Device Transition, Distal Hydrophilic Coated For Navigability ?Nylon Outer Layer With Reinforced Stainless-Steel Coil - Helps In Smooth & Anti-Kink Effect , Braided Long Sheath – 6-8F – 65Cm – Ce/Dcgi Approved ?Diameter 6,7,8F And Length 65Cm. Atraumatic Tip For Carotid & Distal Procedures • Haemostatic Valves (Cross Cut Valve & Tbv- Detachable Valves For Thrombus Management) • Gold Coil Marker - For Distal Visibility • Ptfe Coating - Seamless Device Transition, Distal Hydrophilic Coated For Navigability • Nylon Outer Layer With Reinforced Stainless-Steel Coil - Helps In Smooth & Anti-Kink Effect , Braided Long Sheath – 6-8F – 90Cm - Usfda/Pmda Approved ?Diameter 6,7,8F And Length 90Cm. Atraumatic Tip For Carotid & Distal Procedures ?Haemostatic Valves (Cross Cut Valve & Tbv- Detachable Valves For Thrombus Management) ?Gold Coil Marker - For Distal Visibility ?Ptfe Coating - Seamless Device Transition, Distal Hydrophilic Coated For Navigability ?Nylon Outer Layer With Reinforced Stainless-Steel Coil - Helps In Smooth & Anti-Kink Effect , Braided Long Sheath – 6-8F – 90Cm – Ce/Dcgi Approved ?Diameter 6,7,8F And Length 90Cm. Atraumatic Tip For Carotid & Distal Procedures ?Haemostatic Valves (Cross Cut Valve & Tbv- Detachable Valves For Thrombus Management) ?Gold Coil Marker - For Distal Visibility ?Ptfe Coating - Seamless Device Transition, Distal Hydrophilic Coated For Navigability ?Nylon Outer Layer With Reinforced Stainless-Steel Coil - Helps In Smooth & Anti-Kink Effect , Braided Long Sheath – 8-18F – All Length – Ce/Dcgi Approved ?Diameter 8-18F And All Length. Atraumatic Tip For Carotid & Distal Procedures ?Haemostatic Valves (Cross Cut Valve & Tbv- Detachable Valves For Thrombus Management) ?Gold Coil Marker - For Distal Visibility ?Ptfe Coating - Seamless Device Transition, Distal Hydrophilic Coated For Navigability ?Nylon Outer Layer With Reinforced Stainless-Steel Coil - Helps In Smooth & Anti-Kink Effect , Hydrophilic Guidewire (Length - 150) With Mcoat/Hydrocoat Technology – Pmda/Ce Approved ?Standard Tip & .035, .032, .038, .025. .018 Diameter & 150 Cm Length - Straight / Angled / 1.5Mm J Shape ?Tapered Tip, Single Nitinol Core Alloy, Tungsten-Infused Polyurethane Jacket ?Hydrophilic Polymer Coat. One Piece Construction & Radiopaque Polyurethane Jacket. , Hydrophilic Guidewire (Length - 150) With Mcoat/Hydrocoat Technology – Dcgi Approved ?Standard Tip & .035, .032, .038, .025. .018 Diameter & 120 Cm & 150 & 180 Cm Length - Straight / Angled / 1.5Mm J Shape, Straight A, S, R-1.5Mmj, R-3Mmj In Standard And Stiff Support Level ?Tapered Tip, Single Nitinol Core Alloy, Tungsten-Infused Polyurethane Jacket ?Hydrophilic Polymer Coat. One Piece Construction & Radiopaque Polyurethane Jacket. , Hydrophilic Guidewire (Length - 180) With Mcoat/Hydrocoat Technology – Pmda/Ce Approved ?Standard Tip & .035, .032, .038, .025. .018 Diameter & 180 Cm Length - Straight / Angled ?Tapered Tip, Single Nitinol Core Alloy, Tungsten-Infused Polyurethane Jacket ?Hydrophilic Polymer Coat. One Piece Construction & Radiopaque Polyurethane Jacket. , Hydrophilic Guidewire (Length - 260) With Mcoat/Hydrocoat Technology – Pmda/Ce Approved ?Standard Tip & .035, .032, .038, .025. .018 Diameter & 260 Cm Length - Straight / Angled ?Tapered Tip, Single Nitinol Core Alloy, Tungsten-Infused Polyurethane Jacket ?Hydrophilic Polymer Coat. One Piece Construction & Radiopaque Polyurethane Jacket. , Hydrophilic Guidewire (220 & 260) With Mcoat/Hydrocoat Technology – Dcgi Approved • Standard Tip & .035, .032, .038, .025. .018 Diameter & 220 Cm & 260 Cm Length - Straight / Angled / 1.5Mm J Shape, Straight A, S, R-1.5Mmj, R-3Mmj In Standard And Stiff Support Level • Tapered Tip, Single Nitinol Core Alloy, Tungsten-Infused Polyurethane Jacket • Hydrophilic Polymer Coat. One Piece Construction & Radiopaque Polyurethane Jacket. , Extra Stiff - Hydrophilic Guidewire -150 Cm Usfda/Pmda Approved • 0.035, .032, .038, .025, .018 Diameter And 150 Cm Length - Straight / Angled -Half Stiff And Stiff, Extra Stiff • With Mcoat Technology Tapered Tip, Single Nitinol Core Alloy, Tungsten-Infused Polyurethane Jacket • Hydrophilic Polymer Coat. One Piece Construction & Radiopaque Polyurethane Jacket. , Extra Stiff - Hydrophilic Guidewire -260 Cm Usfda/Pmda Approved • 0.035, .032, .038, .025, .018 Diameter And 150 Cm Length - Straight / Angled -Half Stiff And Stiff, Extra Stiff • With Mcoat Technology Tapered Tip, Single Nitinol Core Alloy, Tungsten-Infused Polyurethane Jacket • Hydrophilic Polymer Coat. One Piece Construction & Radiopaque Polyurethane Jacket. , Ptfe Guidewire 150 Cm - Usfda/Pmda Approved ?150Cm, 175 Cm Of Lengths & 0.018 To 0.038 Diameter With Silicon Coated Tip. ?Silicon Coated Tip With Choice Of Stainless-Steel Core Or Nitinol Core, ?Should Be Available Fixed As Well As Movable Core. , Ptfe Guide Wire – 150 Cm – Ce/Dcgi Approved ?Should Be Available In 0.025, 0.032, 0.035 & 0.038 Inches, 150 Cm Long, Straight & J-Shaped Tip ?Should Be Available In Variable Lengths Of Flexible/Floppy End, Variable J Tip Sizes ?Should Be Available Fixed As Well As Movable Core. , Ptfe Guidewire – 260 Cm - Usfda/Pmda Approved ?260 Cm Of Lengths & 0.018 To 0.038 Diameter With Silicon Coated Tip. ?Silicon Coated Tip With Choice Of Stainless-Steel Core Or Nitinol Core, ?Should Be Available Fixed As Well As Movable Core. , Ptfe Guide Wire – 260 Cm – Ce/Dcgi Approved ?Should Be Available In 0.025, 0.032, 0.035 & 0.038 Inches, 150 Cm Long, Straight & J-Shaped Tip ?Should Be Available In Variable Lengths Of Flexible/Floppy End, Variable J Tip Sizes ?Should Be Available Fixed As Well As Movable Core. , Amplatz Super-Stiff Guide Wire - 260 – Usfda/Ce/Dcgi Approved ?Should Be Available In 0.035- And 0.038-Inches Size, 260/300 Cm Long, Straight Or J-Shaped Tip ?Should Be Available Fixed As Well As Movable Core. , Double Curve Extra Stiff Guide Wire – Landerquist Type – Regular Length , Double Curve Extra Stiff Guide Wire – Landerquist Type – 260Cm/300Cm , Pre-Shaped – Tavi Support Wire – Usfda Approved ?Outer Diameter: 0.035” (0.889 Mm), Length: 275 Cm ?Core Material: Stainless Steel With Lubrigree Ptfe Coating ?Unique Product Dimensions By Curve Size - Extra Small, Small, Large Curve , Radial Angiographic Catheter – Tig Curve (4-6F) - Usfda/Pmda -Approved ?Sizes - 4F, 5F, 6F, Shapes - Tig/3.5 Jacky/4-Sarah ?Two-Layer Construction, Double Braided Stainless-Steel Two-Ply Mesh Sandwiched Between Layers Of Polyurethane And Polyamide Elastomers. ?Must Have The Shaft Inner Layer And Outer Layer Contain Barium Sulphate With 32 Strands Of Stainless-Steel Braid ?Must Have Anti-Kinking Protector Sleeve, With Non-Braided Tip Shaft (Distal -2 Cm). ?Must Have Inner Diameter Of 4F = 1.03Mm, 5F= 1.20Mm, 6F = 1.30Mm , Radial Angiographic Catheter Hydrophilic – Tig Curve (4-6F) - Dcgi Approved ?Length - 80Cm / 100Cm / 110Cm / 130Cm, Sizes - 4F, 5F, 6F ?Must Have Triple-Layer Construction, Double Braided Stainless-Steel Two-Ply Mesh Sandwiched Between Layers Of Nylon And Pebax. ?Must Have Anti-Kinking Protector Sleeve, With Uncoated Non-Braided Tip Shaft (Distal -2 Cm) ?Must Have Inner Diameter Of 4F = 1.05Mm, 5F= 1.20Mm, 6F = 1.47Mm With 1000Psi Flow Rate. , Radial Angiographic Catheter Hydrophilic – Tig Curve (4-6F) - Dcgi Approved ?Length - 80Cm / 100Cm / 110Cm / 130Cm, Sizes - 4F, 5F, 6F ?Must Have Triple-Layer Construction, Double Braided Stainless-Steel Two-Ply Mesh Sandwiched Between Layers Of Nylon And Pebax. ?Must Have Anti-Kinking Protector Sleeve, With Uncoated Non-Braided Tip Shaft (Distal -2 Cm) ?Must Have Inner Diameter Of 4F = 1.05Mm, 5F= 1.20Mm, 6F = 1.47Mm With 1000Psi Flow Rate. , Femoral Diagnostic Catheter: 4 -6 Fr (Jl, Jr, Al, Ar, Pigtail) - Ce Approved ? Shapes - Jl, Jr, Al, Ar,Pigtail ? Triple-Layer Construction, Double Braided Stainless-Steel Two-Ply Mesh Sandwiched Between Layers Of Nylon And Pebax. ? Inner Diameter Of 4F = 1.04Mm, 5F= 1.20Mm, 6F = 1.47Mm With 1000Psi Flow Rate. ? Catheter Should Have Slender Profile Ultra-Thin Wall That Creates Large Lumen. ? Catheter Should Have Anti-Kinking Protector, With Uncoated Non-Braided Tip Shaft (Distal -2 Cm). , Femoral Diagnostic Catheter: 4 -6 Fr (Jl, Jr, Al, Ar, Im, Pigtail, Mp) - Usfda/Pmda -Approved ?Transfemoral Catheter Shapes Jl, Jr, Al, Ar, Im, Pigtail, Mp ?Braided Catheter With Stainless Steel Mesh Technology. ?Inner Diameter Of 4Fr =1.03Mm ,5Fr = 1.20Mm, 6Fr = 1.30Mm Or More Resulting In Higher Flow Rates. ?The Shaft Inner Layer And Outer Layer Should Contain Barium Sulphate With 32 Strands Of Stainless-Steel Braid ?Catheter Should Have Ultra-Thin Wall That Creates Large Lumen. ?Catheter Should Have Anti-Kinking Protector, With Non-Braided Tip Shaft (Distal -2 Cm). , Judkins Catheter (Jr & Jl) – 4 – 6 Fr ?Size - 4 French/5 French /6 French Size , Amplatz Catheter – Al & Ar – 4 6 Fr ?Size - 4 French/5 French /6 French , Multipurpose Catheter (Mp) 4-6 Fr ?Size - 4 French/5 French /6 French Size , Pigtail Catheter – 4 -6 Fr ?Size – 4 – 6 French , Angiographic Sizing Pigtail Catheter 5F/ 6F/ 7F – ?Size – 5 F – 7 F , Internal Mammary Catheter – 4 -6 Fr ?Size - 4 French/5 French /6 French In Various Standard Curves And Lengths. , By-Pass Graft Catheter ?Size - 4 French/5 French /6 French In Various Standard Curves And Lengths. , Nih Catheter - ?4 French/5 French /6 French/7 French/8French In Various Standard Curves And Lengths. , Cournard Catheter ?4 French/5 French /6 French/7 French/8French In Various Standard Curves And Lengths. , Diagnostic Catheters For Neonatal Use - 3- ‘French’ ?Pigtail, Judkins, Multipurpose, Cobra And Other Diagnostic Catheters Of 3 Fr. Size ?Varying Lengths And Shapes , Drug Delivery/Infusion Catheter , Coronary Probing Catheter , Coronary Perfusion Catheter , Coronary Trapeer Catheter , Swan Ganz Catheter - Us Fda Approved- 6F/7F , Swan Ganz Catheter – Ce/Dcgi Approved- 6F/7F , Special Swan Ganz Catheter ?Sizes - 4F, 5F, 6F And 7F And 8 Fr ?4 F Catheter Should Allow The Passage Of At Least 0.021, 5 F – 0.025, 6 F – 0.035 And 7 F, 8F – 0.038-Inch Hydrophilic Guide Wire Catheter Should Be Tapered At Tip To Ensure Uniform Diameter Of The Whole Catheter, 10 Cm Marking Along The Catheter Body. , Balloon Tipped Angiography Catheter , Berman Catheter ?Must Be Available In 4F, 5F, 6F And 7F Sizes ?Should Have 6-8 Holes Proximal To The Balloon For Dye Injection ?Catheter Should Be Tapered At Tip To Ensure Uniform Diameter Of The Whole Catheter, 10 Cm Marking Along Catheter , Reverse Berman Catheter ?Should Be Available In 4F, 5F, 6F & 7F Sizes ?Catheter Should Be Tapered At Tip To Ensure Uniform Diameter Of The Whole Catheter ?Should Have Holes Proximal To The Balloon For Dye Injection ?Should Have A Hole At The Proximal Tip To Allow The Passage Over The Wire , Pigtail Catheter (Pediatric) ?Sizes 3 French/ 4 French/ 5 French/ 6 French ?Smaller Length For Neonatal And Pediatric Use , Special Judkins Coronary Catheter With 2.5 Cm Curve (Pediatric) ?Sizes - 4 F/ 5 F/ 6 F , Angiographic Double Leumen Tracking Catheter – 4 F/5F/ 6F , Renal Double Curve Catheter ?In Various Standard Lengths And Curves , Head Hunter Catheter ?In Various Standard Lengths And Curves ?035-038 Compatible ?100 Cm Long , Simmons/ Sidewinder Catheter ?In Various Standard Lengths And Curves ?035-038 Compatible ?100 Cm Long , Preshaped Catheter For Uterine Artery Embolisation ?In Various Standard Lengths And Curves , Vertebral Catheter ?In Various Standard Lengths And Curves , Coeliac Axis Catheter ?In Various Standard Lengths And Curves , Shepherd’S Hook Catheter ?In Various Standard Lengths And Curves , Vtk Diagnostic Catheter ?In Various Standard Lengths And Curves 5F, 6F Size , 3D Space Rca Angiographic Catheter , Adjustable Hemostasis Valve For Catheters – Usfda Approved ?Should Meet Highest Medical Industrial Standards Click-On ?Quality Certification Should Be Provided From Authorized Agencies. , Adjustable Hemostasis Valve For Catheters - Ce Approved ?Should Meet Highest Medical Industrial Standards ?Quality Certification Should Be Provided From Authorized Agencies. , Adjustable Hemostasis Valve For Catheters - Dcgi Approved ?Should Meet Highest Medical Industrial Standards ?Quality Certification Should Be Provided From Authorized Agencies. , Hemostasis Valve - 8 Fr. Inner Lumen – Usfda Approved ?Star-Shaped Seal With Rotolock , Hemostasis Valve - 8 Fr. Inner Lumen – Ce Approved ? Star-Shaped Seal With Rotolock , Hemostasis Valve - 8 Fr. Inner Lumen – Dcgi Approved ? Star-Shaped Seal With Rotolock , Ptca Pressure Console – Usfda Approved , Ptca Pressure Console – Ce Approved , Ptca Pressure Console – Dcgi Approved , Angioplasty Pressure Diversion Module (Dual-Pathway) – Usfda Approved , Angioplasty Pressure Diversion Module (Dual-Pathway) -Ce Approved , Angioplasty Pressure Diversion Module (Dual-Pathway) -Dcgi Approved , Angioplasty Pressure Diversion Module (Tri-Pathway) – Usfda Approved , Angioplasty Pressure Diversion Module (Tri-Pathway) – Ce Approved , Angioplasty Pressure Diversion Module (Tri-Pathway) – Dcgi Approved , High – Presure Injector Lines - Dcgi Approved ? Should Be Available In Various Lengths ? Should Have Male And Female Luer Locks ? Should Be Transparent And Kink Resistant ? Should Be Able To Take High Pressure Of Angiographic Injections , Disposable Ecg Electrodes For Adults - Us Fda Approved ? Adult Diaphoretic Foam Electrodes. ? Should Be Pre-Gelled, Peel And Stick Electrode With Excellent Adhesion ? Should Have No Residue Once Removed ? Should Conform To Or Exceed The Highest Industrial Standard For Ecg Electrodes,Ation , Special Radiolucent Disposable Ecg Electodes For Adults – Dcgi Approved ? Radiolucent Electrodes For Electro-Physiologic Studies ? Wet Gel Electrodes, Should Be Porous And Breathable ? Should Conform To Or Exceed The Highest Industrial Standard For Ecg Electrodes, ? Quality Certification From Authorized Agencies To Be Provided , Syringe For Pressure Injector Installed In Cath Lab ? Should Be Compatible With Existing Machines At Cath Lab, Gmck , High-Pressure – Contrast Delivery Injector – With Luer Lock Mechanism- 10 Ml , High-Pressure – Contrast Delivery Injector – With Luer Lock Mechanism- 20 Ml , Arterial Pressure Monitor Lines (100, 150 & 200 Cm Long) ?Should Be Available In Sizes Of 100, 150 & 200 Cm Should Have Male Luer Lock Connection At One End And A Female Luer Lock Connection At The Other End , High-Fidelity Pressure Monitoring Extension Line – 200 ? Medical-Grade Pvc Or Dehp-Free Polyethylene, Male And Female Luer Lock Connectors, ? Must Be Dehp-Free (Diethylhexyl Phthalate-Free) And Latex-Free.Pressure Ratings – 1200 Psi , Disposable Transducers For Invasive Pressure Monitoring Compatible With Available System In Cath Lab In Gmck Hospital ?Disposable Transducers For Invasive Pressure Monitoring ?Should Be Compatible With Available System In Cath Lab (Iabp – Data Scope & Cath Lab Transducer) And Iccu At Gmck ?Should Meet Highest Medical Industrial Standards ?Quality Certification Should Be Provided Form Authorized Agencies , Domes For Transducer For Invasive Pressure Monitoring - Dcgi Approved ?Should Be Compatible With Existing Available System At Cath Lab And Ccu At Gmck ?Should Meet Or Exceed Highest Standards ?Quality Certification From Authorized Agencies To Be Provided , Ptca Inflation Device - Us Fda Approved ?Efficient Locking System To Maintain High Pressure ?Rapid Inflation And Deflation, Clear Barrel For Easy Visualization Of De-Bubbling ?Luminescent Analog Pressure Gauge (Up To 30 Atm), 20/30 Inflation Device Registers Pressures Up To 30 Atmospheresergometric And Use Friendly Hand Held Design. , Ptca Inflation Device - Ce Approved ?Efficient Locking System To Maintain High Pressure ?Rapid Inflation And Deflation, Clear Barrel For Easy Visualization Of De-Bubbling ?Luminescent Analog Pressure Gauge (Up To 30 Atm),20/30 Inflation Device Registers Pressures Up To 30 Atmospheres Ergometric And Use Friendly Hand Held Design. , Ptca Inflation Device - Dcgi Approved ?Efficient Locking System To Maintain High Pressure ?Rapid Inflation And Deflation, Clear Barrel For Easy Visualization Of De-Bubbling ?Luminescent Analog Pressure Gauge (Up To 30 Atm), 20/30 Inflation Device Registers Pressures Up To 30 Atmospheresergometric And Use Friendly Hand Held Design. , Y-Connector – Push Pull Mechanism - Us Fda/Pmda Approved ?9F Bore Size For Usage With A Variety Of Devices ?Should Accommodate Virtually All Interventional Devices ?Luer Connector At The Guiding Catheter End, Rotating Adapter At The Guiding Catheter End ?Should Have Bleed Back Safety Mechanism, Stepwise Control For Open, Semi-Open And Closed Position , Y-Connector– Push Pull Mechanism – Ce/Dcgi Approved ?9F Bore Size For Usage With A Variety Of Devices ?Should Accommodate Virtually All Interventional Devices ?Luer Connector At The Guiding Catheter End, Rotating Adapter At The Guiding Catheter End ?Should Have Bleed Back Safety Mechanism, Stepwise Control For Open, Semi-Open And Closed Position , Y-Connector – Push Click Mechanism –180 Psi Pressure Sustenace - Dcgi Approved ?9F Bore Size For Usage With A Variety Of Devices, With 180 Psi Of Pressure Sustenance. ?Should Accommodate Virtually All Interventional Devices ?Luer Connector At The Guiding Catheter End, Rotating Adapter At The Guiding Catheter End ?Should Have Bleed Back Safety Mechanism, Stepwise Control For Open, Semi-Open And Closed Position , Y-Connector – Push Click Mechanism - 300 Psi Pressure Sustenace –Dcgi Approved ?9F Bore Size For Usage With A Variety Of Devices, With 300 Psi Of Pressure Sustenance. ?Should Accommodate Virtually All Interventional Devices ?Luer Connector At The Guiding Catheter End, Rotating Adapter At The Guiding Catheter End ?Should Have Bleed Back Safety Mechanism, Stepwise Control For Open, Semi-Open And Closed Position , Y- Connector Kit – Push Pull Mechanism - Stepwise Control For Open, Semi-Open And Closed Position (Okay – 2 Type) - Us Fda / Ce Approved ?Should Accommodate Virtually All Interventional Devices ?Luer Connector At The Guiding Catheter End, Rotating Adapter At The Guiding Catheter End ?Should Have Bleed Back Safety Mechanism , W-Connector - Bifurcation Ptca – Usfda/Ce//Dcgi Approved ?Two Ports For Insertion Of Two Ptca Balloons Or One Balloon And One Other Part At The Same Time ?Luer Connector At The Guiding Catheter End, Rotating Adapter At The Guiding Catheter End , Manifold With Attached Tubings (Angio Kit) With 3 Port Left-Off /Right Off Orientation - Us Fda/Ce/Dcgi Approved ? Pressure Integrity - 250 Pascal Per Square Inches -500 Pascal Per Square Inches Rating And Wide Port Spacing. Clear Polycarbonate Body ? Integrated Pre-Flushed Transducer Port ? Minimum Flow Rate Of 85 Ml/Sec At 500 Psi. The Design Must Minimize Turbulence And Air Entrapment, Evidenced By An Airless Rotator Mechanism For Enhanced Patient Safety ? Three Side Port Manifold, One Connector Tubing For Connecting Manifold To Tuohy Borst ? One Luer Lock Control Syringe (10 Or 12 Ml) For Contrast Injection ? Two Large Bore Tubing (With Flow Regulating Knob) For Withdrawing Contrast & Saline One 3 Way Stop-Cock ? Color Coded Manifold With Left-Off /Right Off Orientation. , Manifold With Attached Tubings (Angio Kit) With 2 Port Left-Off /Right Off Orientation – Usfda/Ce/Dcgi Approved ? Pressure Integrity - 250 Pascal Per Square Inches -500 Pascal Per Square Inches Rating And Wide Port Spacing. Clear Polycarbonate Body ? Integrated Pre-Flushed Transducer Port ? Minimum Flow Rate Of 85 Ml/Sec At 500 Psi. The Design Must Minimize Turbulence And Air Entrapment, Evidenced By An Airless Rotator Mechanism For Enhanced Patient Safety ? Two Side Port Manifold, One Connector Tubing For Connecting Manifold To Tuohy Borst ? One Luer Lock Control Syringe (10 Or 12 Ml) For Contrast Injection ? Two Large Bore Tubing (With Flow Regulating Knob) For Withdrawing Contrast & Saline One 3 Way Stop-Cock ? Color Coded Manifold With Left-Off /Right Off Orientation. , Guiding Catheter With Special Extra Backup Curve Length (Abu 3.0, 3.25, 3.5, 3.75, 4.0) – Ce Approved ? Must Have (Abu 3.0, 3.25, 3.5, 3.75, 4.0) And Must Include 6.5 French Catheter ? Must Have Triple Layered Ss Braided Sandwich Structure With Outer Polymer Blend Layer & Inner Ptfe Layer ? Must Have Flat Wire Braided Structure, Should Have Uncoated And Non-Braided Atraumatic Soft Tip ? Must Have Various Tip Shapes And Curves – Extrabackup Left, Jl&Jr, Al&Ar, Mp ? Should Have Od Of 6F, 6.5F, 7F-8F. , Special 6.5 Introducer & 6.5F Guiding Catheter (Combo) – For Tri Procedures – Ce Approved ? Must Have Triple Layered Ss Braided Sandwich Structure With Outer Polymer Blend Layer & Inner Ptfe Layer ? Must Have Flat Wire Braided Structure ? Should Have Uncoated And Non-Braided Atraumatic Soft Tip ? Must Have Various Tip Shapes And Curves – Extrabackup Left, Jl&Jr, Al&Ar, Mp , Radial Guiding Catheter Both Curve -Us Fda Approved ? Should Be Braided With Low Friction Inner Layer ? Should Have Atraumatic Soft Tip ? Should Be Available In Various Tip Shapes And Curves For Access To Different Parts Of The Peripheral Vasculature, Including Renal Double Curve, Cobra, Multi – Purpose And Other Shapes ? Should Have Od Of 6F-8F Available ? Should Have The Largest Id For Each Od ? Should Have Lengths Ranging From 55-90 Cm , Radial Guiding Catheter Both Curve -Ce Approved ? Should Be Braided With Low Friction Inner Layer ? Should Have Atraumatic Soft Tip ? Should Be Available In Various Tip Shapes And Curves For Access To Different Parts Of The Peripheral Vasculature, Including Renal Double Curve, Cobra, Multi – Purpose And Other Shapes ? Should Have Od Of 6F-8F Available ? Should Have The Largest Id For Each Od ? Should Have Lengths Ranging From 55-90 Cm , Radial Guiding Catheter Both Curve -Dcgi Approved ? Should Be Braided With Low Friction Inner Layer ? Should Have Atraumatic Soft Tip ? Should Be Available In Various Tip Shapes And Curves For Access To Different Parts Of The Peripheral Vasculature, Including Renal Double Curve, Cobra, Multi – Purpose And Other Shapes ? Should Have Od Of 6F-8F Available ? Should Have The Largest Id For Each Od ? Should Have Lengths Ranging From 55-90 Cm , Transradial Guiding Catheter Right Curve/ Left Curve – Us Fda /Ce Approved ? Should Be Braided With Low Friction Inner Layer ? Should Have Atraumatic Soft Tip ? Should Be Available In Various Tip Shapes And Curves For Access To Different Parts Of The Peripheral Vasculature, Including Renal Double Curve, Cobra, Multi – Purpose And Other Shapes ? Should Have Od Of 6F-8F Available ? Should Have The Largest Id For Each Od ? Should Have Lengths Ranging From 55-90 Cm , Radial Guiding Catheter Ikari Curve -Dcgi Approved ?Should Be Braided With Low Friction Inner Layer ?Should Have Atraumatic Soft Tip ?Should Be Available In Various Tip Shapes And Curves For Access To Different Parts Of The Vasculature ?Should Have Od Of 6F-8F Available ?Should Have The Largest Id For Each Od ?Should Have Lengths Ranging From 90 Cm Or Above , Guiding Catheter For Peripheral Vascular Use – Us Fda Approved ?Should Be Available In Various Tip Shapes And Curves For Access To Different Parts Of The Coronary Vasculature, Including Judkins, Multi – Purpose And Other Shapes ?Should Have Od Of 5F-8F Available ?Should Have Lengths Ranging From 55-100 Cm , Guiding Catheter For Peripheral Vascular Use – Ce Approved ?Should Be Available In Various Tip Shapes And Curves For Access To Different Parts Of The Coronary Vasculature, Including Judkins, Multi – Purpose And Other Shapes ?Should Have Od Of 5F-8F Available ?Should Have Lengths Ranging From 55-100 Cm , Guiding Catheter For Peripheral Vascular Use – Dcgi Approved ?Should Be Available In Various Tip Shapes And Curves For Access To Different Parts Of The Coronary Vasculature, Including Judkins, Multi – Purpose And Other Shapes ?Should Have Od Of 5F-8F Available ?Should Have Lengths Ranging From 55-100 Cm , Guiding Catheter For Peripheral Vascular Use (5- 10F)– Dcgi Approved ?Should Be Available In Various Tip Shapes And Curves For Access To Different Parts Of The Coronary Vasculature, Including Judkins, Multi – Purpose And Other Shapes ?Should Have Od Of 5F-10F Available ?Should Have Lengths Ranging From 55-100 Cm , Long Sheath For Contra – Lateral Iliac/ Femoral Access – Us Fda Approved ?Should Be Low Friction With Inner Coating To Allow Catheter Manipulation ?Should Have Distal Radio-Opaque Tip For Enhanced Visibility On Fluoroscopy ?Should Have A Proximal Hemostasis Valve/ Provision For Tuohyborst Valve ?Shove Be Color Coded For Size Identification ?Should Be Available In 4F – 9 F Size With The Largest Id, Lengths Ranging From 40-110 Cm , Renal Guiding Catheter / Renal Guiding Catheter Double Curve/ Renal Guiding Catheter Single Curve – Us Fda /Ce Approved ?Should Be Braided With Low Friction Inner Layer Should Be Available In Various Tip Shapes And Curves For Access To Different Parts Of The Peripheral Vasculature, Including Renal Double Curve, Cobra, Multi – Purpose And Other Shapes ?Should Have Od Of 6F-8F Available, Should Have Lengths Ranging From 55-90 Cm , Renal Guiding Catheter / Renal Guiding Catheter Double Curve/ Renal Guiding Catheter Single Curve – Dcgi Approved ?Should Be Braided With Low Friction Inner Layer Should Be Available In Various Tip Shapes And Curves For Access To Different Parts Of The Peripheral Vasculature, Including Renal Double Curve, Cobra, Multi – Purpose And Other Shapes ?Should Have Od Of 6F-8F Available, Should Have Lengths Ranging From 55-90 Cm , Mother & Child Catheter – Us Fda/Ce Approved ?With Reliable Support With Large Inner Lumen And Inner Ptfe. , Mother & Child Catheter – Dcgiapproved ?With Reliable Support With Large Inner Lumen And Inner Ptfe. , Intubation Catheter For Assisting Delivery Of Stent In Difficult Anatomies – Us Fda/Ce Approved , Intubation Catheter For Assisting Delivery Of Stent In Difficult Anatomies – Dcgi Approved , Rdc Shape Guiding Catheter For Renal & C-Lilac Artery Angioplasty – - Us Fda/Ce / Dcgi Approved , Guide Extention Catheter: (Guide Plus Type) – Usfda/Pmda Approved Guide Extension Catheter Available In Variable Diameters Of 4.7F And 5.0F For Accessing Distal Anatomy And Delivering High Profile Devices; Guide Extension Catheter With A Tapered Distal Shaft For Accessing Distal And Challenging Coronary Anatomy; Guide Extension Catheter With A Resinous Atraumatic Tip; Guide Extension Catheter With A Large Entry Port Design For Easy Device Insertion , Guide Extention Catheter (Guidezilla Type) - Us Fda Approved ? 120 Proximal Hypo-Tube Shaft ? 0.57 Inner Diameter & 0.066” Outer Diameter ? Should Be With Proximal Marker And 1 X 1 Braiding , Guide Extention Catheter (Guidezilla Type) - Ce Approved ? 120 Proximal Hypo-Tube Shaft ? 0.57 Inner Diameter & 0.066” Outer Diameter ? Should Be With Proximal Marker And 1 X 1 Braiding , Guide Extention Catheter (Guidezilla Type) - Dcgi Approved ? 120 Proximal Hypo-Tube Shaft ? 0.57 Inner Diameter & 0.066” Outer Diameter Should Be With Proximal Marker And 1 X 1 Braiding , Manual Aspiration Catheter Aspiration Catheter Of 6F And 7F Guiding Catheter Compatibility; 140 Cm Working Length Catheter With 140 Cm Stylet Length; 90 Cm And 100 Cm Depth Markers; Provide 60Ml Aspiration Syringe For High Suction Efficiency; Large Size Collecting Filter. , Mechanical Aspiration Device – Usfda , Mechanical Aspiration Device – Ce/Dcgi , Thrombectomy Catheters With Distal Balloon Occlusion And Automated Suction During Ptca - Us Fda Approved , Thrombectomy Catheters With Distal Balloon Occlusion And Automated Suction During Ptca – Ce/Dcgi Approved , Thrombectomy Catheters With Motorized Cutting And Suction During Ptca - Us Fda Approved , Thrombectomy Catheters With Motorized Cutting And Suction During Ptca – Ce/Dcgi Approved , Aspiration Thrombectomy Catheter –1.30 Mm Square Suction Area - Usfda/Pmda Approved • Available In Size 6F, 7F Both, Must Have Entry Profile 0.019 Inches • Braided Polyamide Elastomer Shaft, Stainless Steel Wire Braiding And Guide Wire Type Stylet, • 6.0Mm Tip Length For Making Aspiration Inlet To Come Closer To The Target Thrombus And 10Cm-Length Depth. • Must Have Distal 40 Cm Hydrophilic Coating. , Aspiration Thrombectomy Catheter –1.30 Mm Square Suction Area – Ce Approved • Available In Size 6F, 7F Both, Must Have Entry Profile 0.019 Inches • Braided Polyamide Elastomer Shaft, Stainless Steel Wire Braiding And Guide Wire Type Stylet, • 6.0Mm Tip Length For Making Aspiration Inlet To Come Closer To The Target Thrombus And 10Cm-Length Depth. • Must Have Distal 40 Cm Hydrophilic Coating. , Aspiration Thrombectomy Catheter –1.30 Mm Square Suction Area – Dcgi Approved • Available In Size 6F, 7F Both, Must Have Entry Profile 0.019 Inches • Braided Polyamide Elastomer Shaft, Stainless Steel Wire Braiding And Guide Wire Type Stylet, • 6.0Mm Tip Length For Making Aspiration Inlet To Come Closer To The Target Thrombus And 10Cm-Length Depth. • Must Have Distal 40 Cm Hydrophilic Coating. , Computer Aided Vaccum Thrombectomy Catheter Kit Forvte Mechanical Aspiration With Working Length Of 100/115/130 Cm. ? Should Have Multi-Pitch, Laser-Cut Stainless Steel Hypotube For 1:1 Torque Transfer & Advance Deliverability. ? Catheter Should Have Id Of (3.33 Mm), Od Of 12 Fr With Htorq Tip With 50 Mm Circumferencial Sweep. ? Compatible With 12 Fr Sheath & Wire Platform (.014-.038) With Proprietoryseperator Technology. ? Aspiration Tubing Audio Visual Cues To Help Indicate Location Of Clot In System & Compatible With Engine With (-29.2) Inhg Deep Vacuum , Computer Aided Vaccum Thrombectomy Catheter Kit Forvte Mechanical Aspiration With Working Length Of 100 Cm With Flash Mode Designed For Expedited Venous Clot Removal. ? Should Have Multi-Pitch, Laser-Cut Stainless Steel Hypotube For 1:1 Torque Transfer & Advance Deliverability With Lightning Flash Tubing + Flash Catheter +Accessories + Select Catheter. ? Catheter Should Have Id Of 4.5 Mm, Od Of 16 Fr With Htorq Tip With 50 Mm Circumferencial Sweep. ? Compatible With 16 Fr Sheath & Wire Platform (.014-.038) With Proprietoryseperator Technology. ? Should Have Catheter Hub Port +Aspiration Tubing Port + Flow Cap + Flush Port As Rhv ? Packaged With 6F Select Catheter With Ber Or H1 Tip To Further Aid In Vessel Selection. ? Dual Clot Detection Algorithems With Max Id Technology. Aspiration Tubing Audio Visual Cues To Help Indicate Location Of Clot In System & Compatible With Engine With (-29.2) Inhg Deep Vacuum , Computer Aided Vaccum Thrombectomy Catheter Kit Forvte Mechanical Aspiration With Working Length Of 115 Cm With Flash Mode Designed For Expedited Venous Clot Removal. ? Should Have Multi-Pitch, Laser-Cut Stainless Steel Hypotube For 1:1 Torque Transfer & Advance Deliverability With Lightning Flash Tubing + Flash Catheter +Accessories + Select Catheter. ? Catheter Should Have Id Of (4.5 Mm), Od Of 16 Fr With Htorq Tip With 50 Mm Circumferencial Sweep. ? Compatible With 16 Fr Sheath & Wire Platform (.014-.038) With Proprietoryseperator Technology. ? Should Have Catheter Hub Port +Aspiration Tubing Port + Flow Cap + Flush Port As Rhv ? Packaged With 6F Select Catheter With Ber Or H1 Tip To Further Aid In Vessel Selection. ? Dual Clot Detection Algorithems With Max Id Technology. Aspiration Tubing Audio Visual Cues To Help Indicate Location Of Clot In System & Compatible With Engine With (-29.2) Inhg Deep Vaccum , Catheter- ? Stainless Steel Hypotube At The Proximal End,Designed To Enhance Deliverability To The Desired Vesselwith Optimal Visualization And Placement. ? Catheter Size : 6 F Catheter Type : Low Crossing Profile Of 1.75Mm With An Id Of .044”. ? Separator : Proprietary Separator Technology For Easy And Quick Aspiration, With 200 Cm Length And Distal Od Of .89 Mm. Safety Features : Ability To Get The Clot Out And Not Macerate . , Separator Componant: ? 150Cm - Proprietary Separator Technology For Easy And Quick Aspiration, With150 Cm Length And Distal Od Of 1.83 Mm. ? 175 Cm - Proprietary Separator Technology For Easy And Quick Aspiration, With175 Cm Length And Distal Od Of 1.40 Mm. , Aspiration Source - Engine Canister _ ? 1 Litre Capacity Collecting Jar With Measuring Marks. Integrated Clot Catcher With Completely Airtight And Break Resistant To – 2 Atm Pressure. Single Touch Operation. Led Canister Lighting. , Engine Powerful Aspiration Pump ? With 29-Inch Hg Deep Vacuum. Canister With Integrated Clot Catheter. Led Canister Should Be Sleek And Simple Design. , Coronary Micro-Guide Catheter With Gold Marker– Distal 70 Cm Hydrophilic Coat. Usfda/Pmda Approved • Must Have Tapered Stainless Steel Braid Mesh Construction And Inner Ptfe Layer. • Must Have 13 Cm Floppy Distal Segment, 70Cm Distal Hydrophilic Coating • Must Have Distal Outer Diameter 1.8 Fr Or Less And Proximal Outer Diameter 2.6Fr. • Catheter Length 130Cm For Antegrade Approach And 150 Cm For Retrograde Approach. , Coronary Micro-Guide Catheter With Gold Marker– Distal 70 Cm Hydrophilic Coat. Ce/Dcgi Approved • Must Have Tapered Stainless Steel Braid Mesh Construction And Inner Ptfe Layer. • Must Have 13 Cm Floppy Distal Segment, 70Cm Distal Hydrophilic Coating • Must Have Distal Outer Diameter 1.8 Fr Or Less And Proximal Outer Diameter 2.6Fr. • Catheter Length 130Cm For Antegrade Approach And 150 Cm For Retrograde Approach. , Re-Entry Catheter For Cto For Coronary – Us Fda/Ce / Dcgi Approved , Re-Entry Wire For Cto For Coronary – Us Fda/Ce / Dcgi Approved , Re-Entry Balloon With Two Exit Port For Cto For Coronary – Us Fda/Ce / Dcgi Approved , Microcatheter – Tip Entry – 1.3F - 135, 150 Cm - Usfda Approved • Tapered Soft Tip, Tip Entry 1.3 Fr Distal 2.6 Fr & Proximal 2.8 Fr Having Shinka Shaft Length 135 & 150 Cm • Usfda Approved , Microcatheter –Tip Entry – 1.3F -135, 150 Cm – Ce/Dcgi Approved • Tapered Soft Tip, Tip Entry 1.3 Fr Distal 2.6 Fr & Proximal 2.8 Fr Having Shinka Shaft Length 135 & 150 Cm • Usfda Approved , Microcatheter – Tip Entry – 1.4F -135, 150 Cm - Usfda Approved • Tapered Soft Tip, Tip Entry 1.4 Fr Distal 1.9 Fr & Proximal 2.6 Fr Having Shinka Shaft Length 135 & 150 Cm • Usfda Approved , Microcatheter – Tip Entry – 1.4F -135, 150 Cm – Ce/Dcgi Approved • Tapered Soft Tip, Tip Entry 1.4 Fr Distal 1.9 Fr & Proximal 2.6 Fr Having Shinka Shaft Length 135 & 150 Cm • Usfda Approved , Microcatheter - Double Lumen – Usfda Approved , Microcatheter - Double Lumen – Usfda Approved , Coaxial Microcatheter System For Peripheral Vessels – Usfda/Pmda Approved ? 2.8Fr And 2.4Fr - 2.4 And 2.0Fr Pre-Shaped Tip ? Tungsten Coil Pitch Construction, Ptfe Inner Layer, Dmso Compatible, Radiopaque 0.7 Mm Platinum/Iridium Markers , Coaxial Microcatheter System For Peripheral Vessels – Ce/Dcgi Approved ? 2.8Fr And 2.4Fr - 2.4 And 2.0Fr Pre-Shaped Tip Tungsten Coil Pitch Construction, Ptfe Inner Layer, Dmso Compatible, Radiopaque 0.7 Mm Platinum/Iridium Markers , Radial Artery Haemostasis Device- (Trans Radial Band) – Usfda/Pmda Approved ?Sizes – 24Cm And 29Cm, Must Have Belt Magic Tape For Fast Application. ?Consists Of Two Balloon Specially Designed For Spot Compression Of The Radial Puncture Site. ?Must Have Curved Support Plate. Must Have Green Positioning Marker , Radial Artery Haemostasis Device- (Trans Radial Band) – Ce/Dcgi Approved ?Sizes – 24Cm And 29Cm, Must Have Belt Magic Tape For Fast Application. ?Consists Of Two Balloon Specially Designed For Spot Compression Of The Radial Puncture Site. Must Have Curved Support Plate. Must Have Green Positioning Marker , Femoral Compression Devices – Disc / Dome Based Compression- Us Fda Approved , Femoral Compression Devices – Disc / Dome Based Compression – Ce/Dcgi Approved , Icd/Pi Compression Devices , Ptca/Coronary Angiography Drap Set ?Contains Absorbable Disposable Woven Cloth Sheet Of Size 1.5 Meter Z 2.5 Meter (2No) ?Contains Absorbable Disposable Woven Cloth Sheet Of Size 1.5 Meter X 1Metr (2No) , G- Kit Type Disposable Surgeons Gown Set , Disposable Plastic Sheet Of Size 1.5X2.5 Mtr , Angiography Cine Recordable Disk- Compact R Type Media With Cover With Govt. Medical College Kota & M.C Logo Printed Over The Cover , Angiography Cinerecordable -Digital Versetile – Rtype Media With Cover With Govt. Medical College Kota & M.C Logo Printed Over The Cover , G-Kit Type Disposable Sterile Surgeon Gowns , Disposable E.O. Sterile Angiography Drap Set Kit (Radial), ?Should Have Two Long Disposable Sheet In Both Sizes ?( 1.50 Meter X 1.0 Meter With Hole Of 3 Inch Radius -1 Quantity) ?( 1.50 Meter X 2.5 Meter With Hole Of 3 Inch Radius – 2 In Quantity) , Disposable E.O Sterile Angiography Drap Set Kit (Femoral), ?Should Have Two Long Disposable Sheet In Both Sizes ?( 1.50 Meter X 1.0 Meter With Hole Of 3 Inch Radius -1 Quantity), ?( 1.50 Meter X 2.5 Meter With Hole Of 3 Inch Radius – 2 In Quantity) , Long Disposable E.O Sterile Sheet(1.50 Meter X 2.5 Meter Size) , Small Disposable E.O Sterile Sheet(1.50 Meter X 1.0 Meter Size) , Rat Pad Type Radiation Protection Device Shield In All Sizes , Disposable Radiation Protection Shields & Drapes ? Disposable Non Fenestrated Lead Free Absorbable Sterile Barrier Pad For Protection During Fluoroscopy For Coronary Interventional Procedures With A Minimum Thickness Of 0.25 Mm Lead Equivalence, With Patented Bi-Layer Homogenous Sheet Tested & Certified To Iec 61-1:2014, Astm F3094-14, Din 6857-1, Usfda Approved, Iso 13485 & Barc Certified With Attenuation Greater Than 92% At 90Kvp. Dimensions: 12” X 17” , Disposable Radiation Protection Shields & Drapes ? Disposable Scoop Fenestrated Lead Free Absorbable Sterile Barrier Pad For Protection During Fluoroscopy For Coronary Interventional Procedures With A Minimum Thickness Of 0.25 Mm Lead Equivalence, With Patented Bi-Layer Homogenous Sheet Tested & Certified To Iec 61-1:2014, Astm F3094-14, Din 6857-1, Usfda Approved, Iso 13485 & Barc Certified With Attenuation Greater Than 92% At 90Kvp. Dimensions: 12” X 17”, Fenestration: 3.5” X 1.5” , Disposable Radiation Protection Shields & Drapes ? Disposable Circular Fenestrated Lead Free Absorbable Sterile Barrier Pad For Protection During Fluoroscopy For Coronary Interventional Procedures With A Minimum Thickness Of 0.25 Mm Lead Equivalence, With Patented Bi-Layer Homogenous Sheet Tested & Certified To Iec 61-1:2014, Astm F3094-14, Din 6857-1, Usfda Approved, Iso 13485 & Barc Certified With Attenuation Greater Than 92% At 90Kvp. Dimensions: 12” X 17”, Fenestration: Circle Fenestration: 1.5” , Disposable Radiation Protection Shields & Drapes ? Disposable Non Fenestrated Lead Free Absorbable Sterile Barrier Pad For Protection During Fluoroscopy For Peripheral Interventional Procedures With A Minimum Thickness Of 0.25 Mm Lead Equivalence, With A Minimum Length Of 34 Inches And Covering The Length From Hip To Toe; With Patented Bi-Layer Homogenous Sheet Tested & Certified To Iec 61-1:2014, Astm F3094-14, Din 6857-1, Usfda Approved, Iso 13485 & Barc Certified With Attenuation Greater Than 92% At 90Kvp. Dimensions: 12” X 34” , Disposable Radiation Protection Caps Disposable Non Fenestrated Lead-Free Absorbable Head Cap For Protection During Fluoroscopy For Interventional Procedures With A Minimum Thickness Of 0.25 Mm Lead Equivalence And Usfda Approved , External Temporary Pacemaker , Ptca Guide Wire – 2 Mm Silicon Coated Distal Tip, 0.014” Diameter And 180 Cm Length – Usfda/Pmda Approved • Must Have Platinum Coil At Distal Tip. Balance Of Hydrophilic And Hydrophobic Coating • Must Have Directly Jointed Sus And Nitinol Shaft Through Duocore Technology And Silicon Coated Joint. • Must Have Ptfe Coating From 25 To 180 Cm Length. & Mucus Coat Hydrophilic Coating Up To 248 Mm • Should Have 0.6 & 1.0 Gram Force Tip Loads , Ptca Guide Wire – 2 Mm Silicon Coated Distal Tip, 0.014” Diameter And 180 Cm Length – Ce/Dcgi Approved • Must Have Platinum Coil At Distal Tip. Balance Of Hydrophilic And Hydrophobic Coating • Must Have Directly Jointed Sus And Nitinol Shaft Through Duocore Technology And Silicon Coated Joint. • Must Have Ptfe Coating From 25 To 180 Cm Length. & Mucus Coat Hydrophilic Coating Up To 248 Mm • Should Have 0.6 & 1.0 Gram Force Tip Loads , Cto Stiff Ptca Wire - 3.6-Gram Force Tip Load – 2 Mm Silicon Coated Distal Tip, 0.014” Diameter And 180 Cm – Usfda/Pmda Approved •Must Have Platinum Coil At Distal Tip. Balance Of Hydrophilic And Hydrophobic Coating •Must Have Directly Jointed Sus And Nitinol Shaft Through Duocore Technology And Silicon Coated Joint. •Must Have M Coat Hydrophilic Coating Up To 248 Mm & Ptfe Coating From 25 To 180 Cm Length. ? Should Have 3.6-Gram Fore Tip Load , Cto Stiff Ptca Wire - 3.6-Gram Force Tip Load – 2 Mm Silicon Coated Distal Tip, 0.014” Diameter And 180 Cm – Ce/Dcgi Approved •Must Have Platinum Coil At Distal Tip. Balance Of Hydrophilic And Hydrophobic Coating •Must Have Directly Jointed Sus And Nitinol Shaft Through Duocore Technology And Silicon Coated Joint. •Must Have M Coat Hydrophilic Coating Up To 248 Mm & Ptfe Coating From 25 To 180 Cm Length. •Should Have 3.6-Gram Fore Tip Load , Ptca Guidewire For Septal Navigation - 0.03 Gm Tip Load– Usfda Approved •Tip Load 0.3 Gm, Hydrophilic Coating With Sion Tec Technology, Coil Length 19 Cm, Length 190 Cm & 300 Cm , Ptca Guidewire For Septal Navigation - 0.03 Gm Tip Load – Ce/Dcgi Approved •Tip Load 0.3 Gm, Hydrophilic Coating With Sion Tec Technology, Coil Length 19 Cm, Length 190 Cm & 300 Cm , Ptca Guidewire For Cto – 3 Gm Tip Load - 8.5 Cm Spring Coil - Usfda Approved •Stainless Core, Actone Technology, Polymer Jacket With Hydrophilic Coating, Tip Load 3 Gm, Radiopaque Length 3 Cm, Spring Coil 8.5 Cm, Length 190 Cm & 300 Cm , Ptca Guidewire For Cto – 3 Gm Tip Load - 8.5 Cm Spring Coil - Ce/Dcgi Approved •Stainless Core, Actone Technology, Polymer Jacket With Hydrophilic Coating, Tip Load 3 Gm, Radiopaque Length 3 Cm, Spring Coil 8.5 Cm, Length 190 Cm & 300 Cm , Ptca Guidewire For Cto – 3 Gm Tip Load – 3 Cm Spring Coil – Usfda Approved •Stainless Core, Actone Technology, Polymer Jacket With Hydrophilic Coating, Tip Load 3 Gm, Radiopaque Length 3 Cm, Spring Coil 3 Cm, Length 190 Cm & 300 Cm , Ptca Guidewire For Cto – 3 Gm Tip Load – 3 Cm Spring Coil – Ce/Dcgi Approved •Stainless Core, Actone Technology, Polymer Jacket With Hydrophilic Coating, Tip Load 3 Gm, Radiopaque Length 3 Cm, Spring Coil 3 Cm, Length 190 Cm & 300 Cm , Ptca Guidewire For Cto – 3 Gm Tip Load – 11 Cm Spring Coil – Usfda Approved •Stainless Core, Actone Technology, Polymer Jacket Length 40 Cm With Hydrophilic Coating 50 Cm, Tip Load 3 Gm, Radiopaque Length 3 Cm, Spring Coil 11 Cm, Length 200 Cm & 300 Cm With Straight Tip & 1 Mm Pre Shape , Ptca Guidewire For Cto – 3 Gm Tip Load – 11 Cm Spring Coil – Ce/Dcgi Approved •Stainless Core, Actone Technology, Polymer Jacket Length 40 Cm With Hydrophilic Coating 50 Cm, Tip Load 3 Gm, Radiopaque Length 3 Cm, Spring Coil 11 Cm, Length 200 Cm & 300 Cm With Straight Tip & 1 Mm Pre Shape , Ptca Guidewire For Cto – 0.6 Gm Tip Load – 28 Cm Spring Coil – Usfda Approved Sion Tecc Technology, Actone Braiding, 17 Cm Polymer Jacket 17 Cm Slip Coat Coating, Radiopaque Length 16 Cm 28 Cm Spring Coil, Tapered Tip 0.010-Inch, Tip Load 0.6 Gm , Ptca Guidewire For Cto – 0.6 Gm Tip Load – 28 Cm Spring Coil – Ce/Dcgi Approved Sion Tecc Technology, Actone Braiding, 17 Cm Polymer Jacket 17 Cm Slip Coat Coating, Radiopaque Length 16 Cm 28 Cm Spring Coil, Tapered Tip 0.010-Inch, Tip Load 0.6 Gm , Ptca Guidewire For Cto – 1.0 Gm Tip Load – 28 Cm Spring Coil – Usfda Approved Sion Tecc Technology, Actone Braiding, 17 Cm Polymer Jacket 17 Cm Slip Coat Coating, Radiopaque Length 16 Cm 28 Cm Spring Coil, Tapered Tip 0.010-Inch, Tip Load 1.0 Gm , Ptca Guidewire For Cto – 1.0 Gm Tip Load – 28 Cm Spring Coil – Ce/Dcgi Approved Sion Tecc Technology, Actone Braiding, 17 Cm Polymer Jacket 17 Cm Slip Coat Coating, Radiopaque Length 16 Cm 28 Cm Spring Coil, Tapered Tip 0.010-Inch, Tip Load 1.0 Gm , Ptca Guidewire For Cto – 1.7, 3.5, 4.5 Gm Tip Load – 15 Cm Spring Coil – Usfda Approved ? Sion Tecc Technology, Actone Braiding, Spring Coil Length 15 Cm, Radiopaque Length 15 Cm, Tapered Tip 0.010 Inch ? Gaia 1St Tip Load 1.7 Gm Tapered Tip 0.011 Inch ? Gaia 2Nd Tip Load 3.5 Gm, Tapered Tip 0.012 Inch ? Gaia 3Rd Tip Load 4.5 Gm, •All Are Mini - Pre Shaped 1Mm 45 Degree Angle , Micro Cone Tip Used For Cto Cases , Ptca Guidewire For Cto – 1.7, 3.5, 4.5 Gm Tip Load – 15 Cm Spring Coil – Ce/Dcgi Approved ? Sion Tecc Technology, Actone Braiding, Spring Coil Length 15 Cm, Radiopaque Length 15 Cm, Tapered Tip 0.010 Inch ? Gaia 1St Tip Load 1.7 Gm Tapered Tip 0.011 Inch ? Gaia 2Nd Tip Load 3.5 Gm, Tapered Tip 0.012 Inch ? Gaia 3Rd Tip Load 4.5 Gm, ? All Are Mini - Pre Shaped 1Mm 45 Degree Angle , Micro Cone Tip Used For Cto Cases , Ptca Guidewire For Cto – 3.0 Gm Tip Load ? Single Core , Core To Tip , Tip Load 3 Gm , Tip Radiopacity 3 Cm , Tip Diameter 0.014 Inch , Tip Radiopacity 11 Cm , Slip Coat Over The Spring Coil Used For Cto Lesion , Ptca Guidewire For Cto – 3.0, 6.0, 12 Gm Tip Load ? Single Core , Core To Tip , Tip Load 3 Gm ,6 Gm , 12 Gm Tip Radiopacity 3 Cm , Tip Diameter 0.014 Inch , Tip Radiopacity 11 Cm , Silicone Coating Coat Over The Spring Coil Used For Cto Lesion , Ptca Guidewire For Cto – 9.0, 12, 20 Gm Tip Load ? Single Core Core To Tip , Tip Load 9 Gm Tapered 0.090 , 12 Gm Tapered 0.090 Inch & 20 Gm Tapered Tip 0.080 Inch For Cto Lesion , Ptca Guidewire For Cto – 3.0 Gm Tip Load Single Core Core To Tip , Tip Load 3 Gm, Radiopacity 3 Cm , Guide Wire Length 330 Cm , Slip Coat Over The Spring Coil , Ptca Guidewire For Cto – 2.0, 4.0, 6.0 Gm Tip Load ? Sion Tecc Technology, Actone Braiding, Spring Coil Length 15 Cm , Radiopaque Length 15 Cm , Tapered Tip 0.010 Inch ? Gaia 1St Tip Load 2 Gm Tapered Tip 0.011 Inch ? Gaia 2Nd Tip Load 4 Gm, Tapered Tip 0.012 Inch ? Gaia 3Rd Tip Load 6 Gm, ? All Are Mini - Pre Shaped 1Mm 45 Degree Angle , Micro Cone Tip , Xtrand Coil , Ptca Wires With Facility Of Boot Links For Extension Of Regular Wire - Us Fda Approved , Micro-Wire (0.008”-0.012” ) With Hydrophilic Coating , Special Inflation Device For High Pressure (55 Atm), High Resolution , Ptca Wire – Tip Load - 0.5-0.7Gm – Usfda Approved ? Regular Workhorse Guidewire With Tapered Elastinite Nitinol Core, Durasteel Ribbon Tip And Available In Both Hydrophilic And Hydrophobic Coatings Between Tip Load 0.5-0.7Gm , Ptca Wire – Tip Load - 0.5-0.7Gm –With Intermediate Polymer Sleeve - Usfda Approved ? Regular Workhorse Guidewire With Elastinite Nitinol Core, Hyten Stainless Steel Tip, Intermediate Polymer Sleeve With Hydrocoat On Distal Tip Between Tip Load 0.5-0.7Gm , Ptca Wire – Tip Load - 0.5-0.7Gm –With Intermediate Polymer Sleeve - Ce/Dcgi Approved ? Regular Workhorse Guidewire With Elastinite Nitinol Core, Hyten Stainless Steel Tip, Intermediate Polymer Sleeve With Hydrocoat On Distal Tip Between Tip Load 0.5-0.7Gm , Ptca Wire – Tip Load - 0.5-0.7Gm –With Hyten Stainless Steel Tip - Usfda Approved ? Regular Workhorse Guidewire With Elastinite Nitinol Core, Hyten Stainless Steel Tip Intermediate Polymer Sleeve With Smoothglide Coating On Proximal And Turbocoat On Distal Tip Between Tip Load 0.5-0.7Gm , Ptca Wire – Tip Load - 0.5-0.7Gm –With Hyten Stainless Steel Tip - Ce/Dcgi Approved ? Regular Workhorse Guidewire With Elastinite Nitinol Core, Hyten Stainless Steel Tip Intermediate Polymer Sleeve With Smoothglide Coating On Proximal And Turbocoat On Distal Tip Between Tip Load 0.5-0.7Gm , Ptca Wire – Tip Load – 0.6 Gm –With Stainless Steel Core With Shaping Ribbon Tip - Usfda Approved ? Regular Workhorse Guidewire With Tapered Stainless Steel Core And Shaping Ribbon Tip Available In Tip Load Of 0.6Gm With Poly Tetra Fluoro Ethylene Coating On Proximal End , Ptca Wire – Tip Load – 0.6 Gm –With Stainless Steel Core With Shaping Ribbon Tip – Ce/Dcgi Approved ? Regular Workhorse Guidewire With Tapered Stainless Steel Core And Shaping Ribbon Tip Available In Tip Load Of 0.6Gm With Poly Tetra Fluoro Ethylene Coating On Proximal End , Ptca Wire – Tip Load – 0.8 Gm – Responsease Core Grind With Palladium-Rhenium Tip – Usfda Approved ? Regular Workhorse Guidewire With Responsease Core Grind Technology And 3Cm Palladium-Rhenium Radiopaque Distal Tip Available In Tip Load Of 0.8Gm With 190 And 300Cm , Ptca Wire – Tip Load – 0.8 Gm – Responsease Core Grind With Palladium-Rhenium Tip – Ce/Dcgi Approved ? Regular Workhorse Guidewire With Responsease Core Grind Technology And 3Cm Palladium-Rhenium Radiopaque Distal Tip Available In Tip Load Of 0.8Gm With 190 And 300Cm , Ptca Wire – Tip Load – 0.9 Gm – Responsease Core Grind With Uncoated Tip – Usfda Approved ? Workhorse Guidewire With Durasteel Core, Responsease Core Grind Technology And 1.5 Cm Uncoated Distal Tip For Tactile Feedback Available In Multiple Variants With Exact Same Tip Load Of 0.9Gm , Ptca Wire – Tip Load – 0.9 Gm – Responsease Core Grind With Uncoated Tip – Ce/Dcgi Approved ? Workhorse Guidewire With Durasteel Core, Responsease Core Grind Technology And 1.5 Cm Uncoated Distal Tip For Tactile Feedback Available In Multiple Variants With Exact Same Tip Load Of 0.9Gm , Ptca Wire – Tip Load – 0.6-.8 Gm – Triple Spring With Rotary Swagging Tip – Usfda Approved ? Workhorse Guidewire With Triple Spring 304V Stainless Steel With Niti Distal Core And Cold Working Rotary Swagging Tip Available In Tip Loads Between 0.6-0.8Gm And Lengths (190/300Cm). , Ptca Wire – Tip Load – 0.6-.8 Gm – Triple Spring With Rotary Swagging Tip – Ce/Dcgi Approved ? Workhorse Guidewire With Triple Spring 304V Stainless Steel With Niti Distal Core And Cold Working Rotary Swagging Tip Available In Tip Loads Between 0.6-0.8Gm And Lengths (190/300Cm). , Speciality Ptca Wire – Low Support - Tip Load 0.8-1.0 Gm – Usfda Approved ? Low Support Durasteel Guidewire With Full Polymer Coating Available In Tip Loads Between 0.8-1.0Gm , Speciality Ptca Wire – Low Support - Tip Load 0.8-1.0 Gm – Ce/Dcgi Approved ? Low Support Durasteel Guidewire With Full Polymer Coating Available In Tip Loads Between 0.8-1.0Gm , Speciality Ptca Wire – Medium Support - Tip Load 1.0-1.2 Gm – Usfda Approved ? Medium Support Durasteel Guidewire With Full Polymer Coating Available In Tiploads Between 1.0-1.2Gm , Speciality Ptca Wire – Medium Support - Tip Load 1.0-1.2 Gm – Ce/Dcgi Approved ? Medium Support Durasteel Guidewire With Full Polymer Coating Available In Tiploads Between 1.0-1.2Gm , Speciality Ptca Wire – Extra Support - Tip Load 1.0-1.2 Gm – Usfda Approved ? Extra Support Durasteel Guidewire With Full Polymer Coating Available In Tiploads Between 1.0-1.2Gm , Speciality Ptca Wire – Extra Support - Tip Load 1.0-1.2 Gm – Ce/Dcgi Approved ? Extra Support Durasteel Guidewire With Full Polymer Coating Available In Tiploads Between 1.0-1.2Gm , Speciality Ptca Wire – Extra Support - Tip Load 1.3-1.5 Gm – Usfda Approved ? Extra Support Durasteel Guidewire With Full Polymer Cover, Marker At 4.5Cm From Distal Tip And Tipload Between 1.3-1.5Gm , Speciality Ptca Wire – Extra Support - Tip Load 1.3-1.5 Gm – Ce/Dcgi Approved ? Extra Support Durasteel Guidewire With Full Polymer Cover, Marker At 4.5Cm From Distal Tip And Tipload Between 1.3-1.5Gm , Speciality Ptca Wire – Stainless Steel - Tip Load 1.0 Gm – Usfda Approved ? Stainless Steel Guidewire With Stainless Steel Coils And Hydrophilic Coating Availabe In Tipload Of 1Gm With Radioapaque Tip Of 3Cm , Speciality Ptca Wire – Stainless Steel - Tip Load 1.0 Gm – Ce/Dcgi Approved ? Stainless Steel Guidewire With Stainless Steel Coils And Hydrophilic Coating Availabe In Tipload Of 1Gm With Radioapaque Tip Of 3Cm , Speciality Ptca Wire – Stainless Steel - Tip Load 0.6 - 0.7 Gm – Usfda Approved ? Stainless Steel Guidewire With Intermediate Polymer Sleeve And Hydrophobic Coating Availabe In Tipload Between 0.6-0.7Gm With Radioapaque Tip Of 3Cm , Speciality Ptca Wire – Stainless Steel - Tip Load 0.6 - 0.7 Gm – Ce/Dcgi Approved ? Stainless Steel Guidewire With Intermediate Polymer Sleeve And Hydrophobic Coating Availabe In Tipload Between 0.6-0.7Gm With Radioapaque Tip Of 3Cm , Speciality Ptca Wire – Elastinite Nitinol - Tip Load 0.7 - 0.8 Gm – Usfda Approved ? Elastinite Nitinol Guidewire With Shaping Ribbon Tip And Hydrophilic Coating Avaialble In Tipload Between 0.7-0.8Gm With Radiopaque Tip Of 4.5Cm , Speciality Ptca Wire – Elastinite Nitinol - Tip Load 0.7 - 0.8 Gm – Ce/Dcgi Approved ? Elastinite Nitinol Guidewire With Shaping Ribbon Tip And Hydrophilic Coating Avaialble In Tipload Between 0.7-0.8Gm With Radiopaque Tip Of 4.5Cm , Speciality Ptca Wire – Stainless Steel - Tip Load 1.7, 4.7, 6.2, 8.7 Gm – Usfda Approved ? Stainless Steel Penetration Guidewire With Core-To-Tip Design And Hydrophilic Coating Available In Tipload Of 1.7, 4.7, 6.2, 8.7 Gm , Speciality Ptca Wire – Stainless Steel - Tip Load 1.7, 4.7, 6.2, 8.7 Gm – Ce/Dcgi Approved ? Stainless Steel Penetration Guidewire With Core-To-Tip Design And Hydrophilic Coating Available In Tipload Of 1.7, 4.7, 6.2, 8.7 Gm , Speciality Ptca Wire – Durasteel - Tip Load 2.5-2.7 Gm – Usfda Approved ? Extra Support Durasteel Cto Guidewire With Full Polymer Cover, Gold Marker At 4.5Cm From Distal Tip And Tipload Between 2.5-2.7Gm , Speciality Ptca Wire – Durasteel - Tip Load 2.5-2.7 Gm – Ce/Dcgi Approved ? Extra Support Durasteel Cto Guidewire With Full Polymer Cover, Gold Marker At 4.5Cm From Distal Tip And Tipload Between 2.5-2.7Gm , Ptca Wire For Cto Tip Load –4.5-4.8 – Usfda Approved ? Cto Guidewire Having Durasteel Core, Intermediate Polymer Sleeve Available In Tipload Between 4.5-4.8Gm Tipload And Penetration Power Of 40 Kgpsin , Ptca Wire For Cto Tip Load –9.5-9.7– Usfda Approved ? Ptca Cto Guidewire Having Durasteel Core, Intermediate Polymer Sleeve Available In Tipload Between 9.5-9.7Gm Tipload And Penetration Power Of 80 Kgpsin , Ptca Wire For Cto Tip Load –13.5-13.9 – Usfda Approved ? Ptca Cto Guidewire Having Durasteel Core, Intermediate Polymer Sleeve Available In Tipload Between 13.5-13.9Gm Tipload And Penetration Power Of 120 Kgpsin , Ptca Wire For Cto Tip Load –12-12.5 – Usfda Approved Cto Guidewire Having Durasteel Core, Intermediate Polymer Sleeve Available In Tipload Between 12.0-12.5Gm Tipload And Penetration Power Of 140 Kgpsin , Ptca Wire For Cto Tip Load –12.8-13.0 – Usfda Approved Cto Guidewire Having Durasteel Core, Intermediate Polymer Sleeve Available In Tipload Between 12.8-13.0Gm Tipload And Penetration Power Of 200 Kgpsin , Ptca Wire For Cto – Tip Load – 11, 14 Gm - Usfda Approved Cto Guidewire Having Having Durasteel Core, Hydrophilic Coating (Excluding The Tip) For Lubricity And Ease Of Movement Within A Microcathete, Textured Tip With Tip Size Of 0.009 Inches And Tip Angle Of 25 Degrees At 1 Mm Of Tip. Should Have The Tip Load Of 11, 14Gm , High Pressure Non-Compliant Balloon – Three Pleats Re-Wrappable Structure - Pmda Approved •With Innovative Triple Layer Balloon Technology With High Pressure Resistance Of 22 Atm. •Must Have Elastomer Outer Layer, Middle Layer Of Polyamide And Inner Most Layer Of Elastomer. •Must Have Nominal Pressure Of 12Atm And Rbp Of 22Atm. •Shorter Thin Distal Tip Of 2.9Mm With Low Entry Profile Of 0.43 Mm. Must Have Hydrophilic Mucus Coating •Must Have 3.0 Mm Short Taper Balloon Shoulder & Must Have 0.8Mm Shorter And 25?M Thinner Radiopaque Marker For Lower Crossing Profile. •Must Have 2.6 French Stainless Steel Core Wire Structured Shaft & Stainless-Steel Stylet In Mid Shaft. Must Have Hypotube Without Ptfe Coating. , High Pressure Non-Compliant Balloon – Three Pleats Re-Wrappable Structure – Ce/Dcgiapproved ? With Innovative Triple Layer Balloon Technology With High Pressure Resistance Of 22 Atm. ? Must Have Elastomer Outer Layer, Middle Layer Of Polyamide And Inner Most Layer Of Elastomer. ? Must Have Nominal Pressure Of 12Atm And Rbp Of 22Atm. ? Shorter Thin Distal Tip Of 2.9Mm With Low Entry Profile Of 0.43 Mm. Must Have Hydrophilic Mucus Coating ? Must Have 3.0 Mm Short Taper Balloon Shoulder & Must Have 0.8Mm Shorter And 25?M Thinner Radiopaque Marker For Lower Crossing Profile. ? Must Have 2.6 French Stainless Steel Core Wire Structured Shaft & Stainless-Steel Stylet In Mid Shaft. Must Have Hypotube Without Ptfe Coating. , Cto Balloon With Ultra – Ultra Low Entry Profile Of 0.016 Must Have Hydrophilic Mucus Coating -Pmda Approved ? Should Have Smallest Diameter 1.00Mm And 5Mm Length. - Three Pleats Re-Wrappable Structure. ? Must Have 0.8Mm Shorter And 25?M Thinner Radiopaque Marker For Lower Crossing Profile. ? Must Have Flexible Tip With Short Balloon Bonding Part Of 0.4Mm. ? Nominal Pressure Of 06 Atm And Rbp Of 14 Atm ? Must Have 2.4 To 2.7 French Tapered Stainless Steel Core Wire Structured Shaft , Cto Balloon With Ultra – Ultra Low Entry Profile Of 0.016 Must Have Hydrophilic Mucus Coating -Ce/Dcgi Approved ? Should Have Smallest Diameter 1.00Mm And 5Mm Length. - Three Pleats Re-Wrappable Structure. ? Must Have 0.8Mm Shorter And 25?M Thinner Radiopaque Marker For Lower Crossing Profile. ? Must Have Flexible Tip With Short Balloon Bonding Part Of 0.4Mm. ? Nominal Pressure Of 06 Atm And Rbp Of 14 Atm ? Must Have 2.4 To 2.7 French Tapered Stainless Steel Core Wire Structured Shaft , Ptca Balloon Semi Compliant For Cto – Usfda Approved ? Cto Indicated Slim Seal Technology On Distal Tip With Lesion Entry Profile Of 0.016, Crossing Profile Of 0.021 And Single Flexible Tungsten Marker Available In Unique Diameter Of 1.2Mm With Variety Of Lengths ? Diameter – 1.2, 1.5. 2.0 ? Length – 6, 8, 12, 15, 20 & In 2Mm-25, 30 , Ptca Balloon Semi Compliant For Cto – Ce/Dcgi Approved ? Cto Indicated Slim Seal Technology On Distal Tip With Lesion Entry Profile Of 0.016, Crossing Profile Of 0.021 And Single Flexible Tungsten Marker Available In Unique Diameter Of 1.2Mm With Variety Of Lengths ? Diameter – 1.2, 1.5. 2.0 ? Length – 6, 8, 12, 15, 20 & In 2Mm-25, 30 , Ptca Balloon Semi Compliant – Usfda Approved ? With Slim Seal Technology On Distal Tip With Crossing Profile Of 0.021”, Lesion Entry Profile Of 0.017” And Microglide Coating Available In Diameter 2.25-5.00Mm And Lengths 6-30Mm ? Diameter – 2.25, 2.5, 2.75, 3.0, 3.25, 3.5, 3.75, 4.0, 4.5, 5.0 Mm ? Length - 6, 8, 12, 15, 20, 25, 30 , Ptca Balloon Semi Compliant – Ce/Dcgi Approved ? With Slim Seal Technology On Distal Tip With Crossing Profile Of 0.021”, Lesion Entry Profile Of 0.017” And Microglide Coating Available In Diameter 2.25-5.00Mm And Lengths 6-30Mm ? Diameter – 2.25, 2.5, 2.75, 3.0, 3.25, 3.5, 3.75, 4.0, 4.5, 5.0 Mm ? Length - 6, 8, 12, 15, 20, 25, 30 , Ptca Balloon Non-Compliant – Usfda Approved ? With Multilayer Crossflex Balloon Technology And Round Tip With Lesion Entry Profile Of 0.018” Available In Diameter 1.5Mm-5Mm And Lengths In 6Mm-25Mm With Skive Technology On Mid Shaft Of Dilatation Catheter ? Diameter – 1.5, 2.0, 2.25, 2.5, 2.75, 3.0, 3.25, 3.5, 3.75, 4.0, 4.5, 5.0 Mm ? Length- 6, 8, 12, 15, 20, 25 , Ptca Balloon Non-Compliant – Ce/Dcgi Approved ? With Multilayer Crossflex Balloon Technology And Round Tip With Lesion Entry Profile Of 0.018” Available In Diameter 1.5Mm-5Mm And Lengths In 6Mm-25Mm With Skive Technology On Mid Shaft Of Dilatation Catheter ? Diameter – 1.5, 2.0, 2.25, 2.5, 2.75, 3.0, 3.25, 3.5, 3.75, 4.0, 4.5, 5.0 Mm ? Length- 6, 8, 12, 15, 20, 25 , Ptca Balloon Non-Compliant – Usfda Approved ? Multilayer And Single Piece Outer Member And Large Hypotube And Visible Hub Printing Should Have Shorter Deflation Time And Shall Come In Sizes Of 1.5 Mm To 6 Mm ? Diameter – 1.5, 2.0, 2.25, 2.5, 2.75, 3.0, 3.25, 3.5, 3.75, 4.0, 4.5, 5.0, 5.5, 6.0 Mm ? Length- 6, 8, 12, 15, 20, 25 , Ptca Balloon Non-Compliant – Ce/Dcgi Approved ? Multilayer And Single Piece Outer Member And Large Hypotube And Visible Hub Printing Should Have Shorter Deflation Time And Shall Come In Sizes Of 1.5 Mm To 6 Mm ? Diameter – 1.5, 2.0, 2.25, 2.5, 2.75, 3.0, 3.25, 3.5, 3.75, 4.0, 4.5, 5.0, 5.5, 6.0 Mm ? Length- 6, 8, 12, 15, 20, 25 , Ptca Balloon Semi-Compliant – Ce Approved ? Balloon With Laser Bond Technology On Distal Tip With Crossing Profile Of 0.021” And Tip Entry Profile Of 0.017” Available In Diameter 2.25-5.00Mm And Lengths 6-30Mm ? Diameter –2.25, 2.5, 2.75, 3.0, 3.25, 3.5, 3.75, 4.0, 4.5, 5.0 Mm ? Length- 6, 8, 12, 15, 20, 25, 30 , Ptca Balloon Semi-Compliant –Dcgi Approved ? Balloon With Laser Bond Technology On Distal Tip With Crossing Profile Of 0.021” And Tip Entry Profile Of 0.017” Available In Diameter 2.25-5.00Mm And Lengths 6-30Mm ? Diameter –2.25, 2.5, 2.75, 3.0, 3.25, 3.5, 3.75, 4.0, 4.5, 5.0 Mm ? Length - 6, 8, 12, 15, 20, 25, 30 , Ptca Balloon Non-Compliant – Ce Approved ? Non-Complaint Coronary Balloon With Tri-Fold Layers And Tip Entry Profile Of 0.018” Available In Diameter 2.0-4.5Mm And Lengths In 8Mm-25Mm ? Diameter –2.0, 2.25, 2.5, 2.75, 3.0, 3.25, 3.5, 3.75, 4.0, 4.5 Mm ? Length - 8, 12, 15, 20, 25 Mm , Ptca Balloon Non-Compliant – Dcgi Approved ? Non-Complaint Coronary Balloon With Tri-Fold Layers And Tip Entry Profile Of 0.018” Available In Diameter 2.0-4.5Mm And Lengths In 8Mm-25Mm ? Diameter –2.0, 2.25, 2.5, 2.75, 3.0, 3.25, 3.5, 3.75, 4.0, 4.5 Mm ? Length - 8, 12, 15, 20, 25 Mm , Slender Profile Tapered Tip Cto Balloon Semi Compliant – With Unique Diameter 1Mm & 6Mm Length – Ce Approved ? Tapered Fit Tungsten Tip With Lesion Entry Profile Of 0.0158, With Tip Entry Id - .0145”Crossing Profile Of 0.021 ? Must Have Special Trifold Rewrap Design, With Selective Hydrophilic Coating Over Balloon ? Must Have Flexible Platinum Iridium Marker With Tungsten Tip ? Diameter – 1, 1.25, 1.5, 2.0, 2.25, 2.5, 2.75, 3.0, 3.25, 3.5, 3.75, 4.0, 4.5, 5.0 Mm, ? Length – 6, 9, 12, 15, 20, 30 Mm ? Must Have Nominal Pressure 8 Atm, Rbp -12 Atm , Tapered Tip Non-Compliant Ptca Balloon With Selective Hydrophilic Coating – Ce Approved ? Must Have Tapered Tungsten Tip With Tungsten Lesion Entry Profile Of 0.0158, With Tip Entry Id - .0145” Crossing Profile Of 0.021, Must Have Gradient Stiff Shaft ? Must Have Flexible Platinum Iridium Marker With Tungsten Tip ? Must Have Special Trifold Rewrap Design, With Selective Hydrophilic Coating Over Balloon ? Diameter –2.0, 2.25, 2.5, 2.75, 3.0, 3.25, 3.5, 3.75, 4.0, 4.5, 5.0 Mm, ? Length – 6, 8, 12, 15, 20, 30 Mm ? Must Have Nominal Pressure 12 Atm, Rbp -20 Atm , Spherical Tip Non-Compliant Lolipop Ptca Balloon With Selective Hydrophilic Coating – Ce Approved ? Must Have Spherical Tungsten Tip With Tungsten Lesion Entry Profile Of 0.0158, With Tip Entry Id - .0145”Crossing Profile Of 0.021, Must Have Gradient Stiff Shaft ? Must Have Flexible Platinum Iridium Marker With Tungsten Tip ? Must Have Special Trifold Rewrap Design, With Selective Hydrophilic Coating Over Balloon ? Diameter –2.0, 2.25, 2.5, 2.75, 3.0, 3.25, 3.5, 3.75, 4.0, 4.5, 5.0 Mm, ? Length – 6, 8, 12, 15, 20, 30 Mm ? Must Have Nominal Pressure 12 Atm, Rbp -20 Atm , Non-Compliant Ptca Balloon – Usfda Approved ? 0.017” Lesion Entry Profile, Crossing Profile - .031, Bi-Segmen Inner Shaft Design With Hydrophilic Coating, Over-The-Inner Tip Design, Slop Outer Shaft ? Platinum Iridium Marker Bands, Nominal Pressure 12 Atm, Rbp -18 Atm ? Diameter –2.0, 2.25, 2.5, 2.75, 3.0, 3.25, 3.5, 3.75, 4.0, 4.5, 5.0, 5.5, 6.0 Mm, ? Length – 6, 8, 12, 15, 20, 30 Mm , Non-Compliant Ptca Balloon – Ce/Dcgi Approved ? 0.017” Lesion Entry Profile, Crossing Profile - .031, Bi-Segmen Inner Shaft Design With Hydrophilic Coating, Over-The-Inner Tip Design, Slop Outer Shaft ? Platinum Iridium Marker Bands, Nominal Pressure 12 Atm, Rbp -18 Atm ? Diameter –2.0, 2.25, 2.5, 2.75, 3.0, 3.25, 3.5, 3.75, 4.0, 4.5, 5.0, 5.5, 6.0 Mm, ? Length – 6, 8, 12, 15, 20, 30 Mm , Semi-Compliant Ptca Balloon – Usfda Approved ? 0.017” Lesion Entry Profile, Crossing Profile - .026, Bi-Segmen Inner Shaft Design With Hydrophilic Coating, Unique, Over-The- Inner Tip Design: Outer Tip Material Rides Over The Inner Shaft Material, Slop Outer Shaft, Optileap Material Withzglide Hydrophilic Coating ? Platinum Iridium Marker Bands, Nominal Pressure 12 Atm, Rbp -18 Atm ? Diameter –1.2, 1.5, 2.0, 2.25, 2.5, 2.75, 3.0, 3.25, 3.5, 3.75, 4.0, 4.5, 5.0 Mm, ? Length – 8, 12, 15, 20, 30, 40 Mm , Semi-Compliant Ptca Balloon – Ce/Dcgi Approved ? 0.017” Lesion Entry Profile, Crossing Profile - .026, Bi-Segmen Inner Shaft Design With Hydrophilic Coating, Unique, Over-The- Inner Tip Design: Outer Tip Material Rides Over The Inner Shaft Material, Slop Outer Shaft, Optileap Material Withzglide Hydrophilic Coating ? Platinum Iridium Marker Bands, Nominal Pressure 12 Atm, Rbp -18 Atm ? Diameter –1.2, 1.5, 2.0, 2.25, 2.5, 2.75, 3.0, 3.25, 3.5, 3.75, 4.0, 4.5, 5.0 Mm, ? Length – 8, 12, 15, 20, 30, 40 Mm , 6F Kbt - Ultra Low Profile Semi Complaint Ptca Balloon – Multilayer Polyamide Sandwich - Ce Approved •Kbt Shaft Compliance - Proximal - 1.73 F, Distal : 2.67 F •Ultra-Low Tip Entry Profile -.040Mm - Crossing Profile: 0.72 Mm/0.028, Rewrap Profile Of 1.84 Mm •Soft Multi-Layered Polyamide Sandwich Design, Trifold Rewrap Design With Selective Hydrophilic Coating At Distal Shaft Including Balloon Tip, Nominal Pressure: 6 Atm, Rated Burst Pressure (Rbp) - 16 Atm (14 Atm For 4.5Mm) •Length (Mm): 9,12,15,20,25,30 ? Diameter(Mm): 2,2.25,2.50,2.75,3.00,3.25,3.5,3.75,4.00 & 4.5 Mm , 6F Kbt – Non-Complaint Ptca Balloon – Multilayer Polyamide Sandwich - Ce Approved ? Kbt Shaft Compliance - Proximal 1.95F, Distal 2.67F ? Ultra-Low Tip Entry Profile -.041Mm - Crossing Profile: 0.72 Mm/0.028, Rewrap Profile Of 1.84 Mm ? Soft Multi-Layered Polyamide Sandwich Design, Trifold Rewrap Design With Selective Hydrophilic Coating At Distal Shaft Including Balloon Tip, Nominal Pressure: 12 Atm, Rated Burst Pressure (Rbp) - 20 Atm. ? Shortest Shoulder Length Of 2.51 Mm ? Length (Mm): 6, 8, 10,12,15,20,25,30 ? Diameter(Mm): 2, 2.25, 2.50, 2.75, 3.00, 3.25, 3.5, 3.75, 4.00 & 4.5 Mm , Thinnest Wall 0.08 Semi Compliant Balloon – Long Length– Ce Approved ? Np -6 Atm, Rbp – 18 Atm, Crossing Profile .65 ? Diameter – 1.25, 1.5, 2.0, 2.25, 2.50, 2.75, 3.00, 3.25, 3.5, 4.00 & 4.5 Mm ? Length –10,12,15,20,25,30, 35, 40 , Angled Shoulder Non-Compliant Balloon – Long Length– Ce Approved ? Angled Shoulder Balloon With Trifold Design, Polyamide Dual Layer, ? Np -8 Atm, Rbp – 20 Atm, Entry Profile -0.016,Crossing Profile .70 ? Diameter – 1.25, 1.5, 2.0, 2.25, 2.50, 2.75, 3.00, 3.25, 3.5, 4.00 & 4.5 Mm ? Length –10,12,15,20,25,30, 35, 40 , Ptca Scoring Balloon – Nitinol Helical Shaped Scoring Element – Usfda Approved ? Tapered Tip And Three Nitinol, Helical Shaped, Electropolished Scoring Elements With Rectangular Edges, Mounted On A Balloon With A Larger Working Range Of 2 Atm - 20 Atm ? Lesion Entry Profile .0172, Hydrophilic Coating, Laser Cut Hypotube, Np – 8 Atm, Rbp – 16 Atm ? Diameter -2.0Mm, 2.5Mm, 3.0Mm, 3.5Mm ? Lengths - 6Mm, 10Mm & 15Mm, 20Mm , Ptca Scoring Balloon – Nitinol Helical Shaped Scoring Element – Ce/Dcgi Approved ? Tapered Tip And Three Nitinol, Helical Shaped, Electropolished Scoring Elements With Rectangular Edges, Mounted On A Balloon With A Larger Working Range Of 2 Atm - 20 Atm ? Lesion Entry Profile .0172, Hydrophilic Coating, Laser Cut Hypotube, Np – 8 Atm, Rbp – 16 Atm ? Diameter -2.0Mm, 2.5Mm, 3.0Mm, 3.5Mm ? Lengths - 6Mm, 10Mm & 15Mm, 20Mm , Ptca Scoring Balloon – Triple Triangular Microtome – Pmda Approved ? Scoring Balloon With Triple Triangular Nylon Microtomes 0.0155” In Height With 120-Degree Angle Between Them. ? An Entry Profile Of O.0167 Inch With 2.2Fr Proximal Shaft And 2.6F Distal Shaft. ? Np-14 Atm Rbp Of 24 Atm ? Diameter -2.0Mm, 2.25Mm, 2.5Mm, 2.75Mm, 3.0Mm, 3.25Mm, 3.5Mm, 4.0Mm. ? Length – 13 Mm , Ptca Scoring Balloon Non-Compliant – High Presure - Single Wire – Usfda Approved ? Scoring Balloon With Single Wire Element, Tip Length – 10Mm, Crossing Profile .0350”. ? Slider Hydrophilic Catheter And Silicon Coated Lumen. ? An Entry Profile Of O.0167 Inch With 2Fr Proximal Shaft And 3F Distal Shaft. ? Np-12 Atm Rbp Of 22 Atm, Average Burst Pressure – 30Atm ? Diameter -2.0Mm, 2.25Mm, 2.5Mm, 2.75Mm, 3.0Mm, 3.25Mm, 3.5Mm, 3.75Mm, 4.0Mm. ? Length – 6, 8, 10, 12, 15, 18, 20, 23, 25, 30 Mm , Ptca Scoring Balloon Non-Compliant – High Presure - Single Wire – Ce/Dcgi Approved ? Scoring Balloon With Single Wire Element, Tip Length – 10Mm, Crossing Profile .0350”. ? Slider Hydrophilic Catheter And Silicon Coated Lumen. ? An Entry Profile Of O.0167 Inch With 2Fr Proximal Shaft And 3F Distal Shaft. ? Np-12 Atm Rbp Of 22 Atm, Average Burst Pressure – 30Atm ? Diameter -2.0Mm, 2.25Mm, 2.5Mm, 2.75Mm, 3.0Mm, 3.25Mm, 3.5Mm, 3.75Mm, 4.0Mm. ? Length – 6, 8, 10, 12, 15, 18, 20, 23, 25, 30 Mm , Ptca Cutting Balloon – Usfda Approved ? Bumper Tip, Acrylated Urethane Atherotome Adhesive, Atherotomes , Z-Glide™ Hydrophilic Coating ? Diameter -2.0Mm, 2.25Mm, 2.5Mm, 2.75Mm, 3.0Mm, 3.25Mm, 3.5Mm, 3.75Mm, 4.0Mm. ? Blade Length – 6, 10, 15 Mm , Ptca Cutting Balloon – Ce/Dcgi Approved ? Bumper Tip, Acrylated Urethane Atherotome Adhesive, Atherotomes , Z-Glide™ Hydrophilic Coating ? Diameter -2.0Mm, 2.25Mm, 2.5Mm, 2.75Mm, 3.0Mm, 3.25Mm, 3.5Mm, 3.75Mm, 4.0Mm. ? Blade Length – 6, 10, 15 Mm , Triploblastic Coated Drug Eluting Ptca Balloon - Ce/Dcgi Approved ? Must Have Optimum Concentration Of Sirolimus – 2.75Ug/Mm ? Diameter – 2 - 4Mm, Length - 10 – 30Mm ? Must Have Nominal Pressure 8Atm, Rbp-16Atm , Durg Eluting Pta Balloon For Below The Knee Peripheral Artery-Dcgi Approved Paclitaxel Drug-Coated Pta Balloon Recommended Guide Wire- Otw (Btk): 0.018 Length (Mm): 80,100,120 & 150 Diameter (Mm): 2,2.5,3 & 4 Recommended Guide Wire- Otw (Sfa): 0.035 Length (Mm): 100,120 & 150 Diameter (Mm): 5,6 & 7 , Drug Eluting Ptca Balloon- Us Fda Approved ? All Types & Sizes ? Different Types Of Drugs , Drug Eluting Ptca Balloon- Ce Approved ? All Types & Sizes ? Different Types Of Drugs , Drug Eluting Ptca Balloon- Dcgi Approved ? All Types & Sizes ? Different Types Of Drugs , Balloon Dilatation Catheter For Aorta & Ivc- Us Fda Approved ?Monorail (Rapid Exchange) And Over-The-Wire (Otw) Balloons ?Available In The Sizes And Lengths , Balloon Dilatation Catheter For Aorta & Ivc- Ce Approved ?Monorail (Rapid Exchange) And Over-The-Wire (Otw) Balloons ?Available In The Sizes And Lengths , Balloon Dilatation Catheter For Aorta & Ivc- Dcgi Approved ?Monorail (Rapid Exchange) And Over-The-Wire (Otw) Balloons ?Available In The Sizes And Lengths , Bib (Balloon In Balloon) Type Balloons For Coarctation Dilatation - Us Fda Approved ?Monorail (Rapid Exchange) And Over-The-Wire (Otw) Balloons ?Available In The Sizes And Lengths , Bib (Balloon In Balloon) Type Balloons For Coarctation Dilatation - Ce Approved ?Monorail (Rapid Exchange) And Over-The-Wire (Otw) Balloons ?Available In The Sizes And Lengths , Bib (Balloon In Balloon) Type Balloons For Coarctation Dilatation - Dcgi Approved ?Monorail (Rapid Exchange) And Over-The-Wire (Otw) Balloons Available In The Sizes And Lengths , Z Med Type Balloon For Aortic Coactation – Us Fda/Ce Approved ?5 To 20 Cm Diameter In All Sizes Otw / Rapid Exchange, Compatible With 0.014”/0.035” And 0.038” Wire , Z Med Type Balloon For Aortic Coactation – Dcgi Approved ?5 To 20 Cm Diameter In All Sizes ?Otw / Rapid Exchange, Compatible With 0.014”/0.035” And 0.038” Wire , Z Med Type Balloon For Aortic Coactation – Us Fda/Ce Approved More Than 20 Cm Diameter In All Sizes Otw / Rapid Exchange, Compatible With 0.014”/0.035” And 0.038” Wire , Z Med Type Balloon For Aortic Coactation – Dcgi Approved ?More Than 20 Cm Diameter In All Sizes ?Otw / Rapid Exchange, Compatible With 0.014”/0.035” And 0.038” Wire , Proximal Optimization Balloon – Usfda Approved ? Specialised Proximal Optimisation Balloon Dilatation Catheter With Ultra Short Balloon Shoulder Of 0.6Mm And An Rbp Of 22 Atm With Sizes Ranging From A Length Of 6-15 Mm And Diameters Ranging From 2.25-5 Mm. Hydrophilic External Surface Coating From Tip To Adjacent Guidewire Port And Silicone Coating Inside Guidewire Lumen. , Proximal Optimization Balloon – Ce/Dcgi Approved ? Specialised Proximal Optimisation Balloon Dilatation Catheter With Ultra Short Balloon Shoulder Of 0.6Mm And An Rbp Of 22 Atm With Sizes Ranging From A Length Of 6-15 Mm And Diameters Ranging From 2.25-5 Mm. Hydrophilic External Surface Coating From Tip To Adjacent Guidewire Port And Silicone Coating Inside Guidewire Lumen. , Ptca High Pressure Cto Balloon – Usfda Approved ? 0.75 Mm Cto Balloon With A Tip Entry Profile Of 0.015” And Ultra Low Crossing Profile Of 0.020” With A Proprietary Distal Welding Technology, 2.2F Distal Shaft, Rated Burst Pressure Of 20 Atm And Average Burst Pressure Of = 28 Atm. ? Diameters From 0.75Mm, 1.0Mm, 1.25Mm, 1.50Mm, 1.75Mm & 2.0Mm ? Lengths From 5Mm, 8Mm, 10Mm, 15Mm, 20Mm, 25Mm & 30Mm. , Ptca High Pressure Cto Balloon – Ce/Dcgi Approved ? 0.75 Mm Cto Balloon With A Tip Entry Profile Of 0.015” And Ultra-Low Crossing Profile Of 0.020” With A Proprietary Distal Welding Technology, 2.2F Distal Shaft, Rated Burst Pressure Of 20 Atm And Average Burst Pressure Of = 28 Atm. ? Diameters From 0.75Mm, 1.0Mm, 1.25Mm, 1.50Mm, 1.75Mm & 2.0Mm ? Lengths From 5Mm, 8Mm, 10Mm, 15Mm, 20Mm, 25Mm & 30Mm. , Rotalink Burr - Us Fda Approved (Compatible With Existing Rota Machine Cath Lab Gmc Kots). , Rotalink Burr – Dcgi Approved (Compatible With Existing Rota Machine Cath Lab Gmc Kota). , Rotalink Advancer - Us Fda Approved (Compatible With Existing Rota Machine Cath Lab Gmc Kota). , Rotalink Advancer - Ce Approved (Compatible With Existing Rota Machine Cath Lab Gmc Kota). , Rotalink Advancer – Dcgi Approved (Compatible With Existing Rota Machine Cath Lab Gmc Kota). , Rotalink Plus (Advancer & Burr) - Us Fda Approved (Compatible With Existing Rota Machine Cath Lab Gmc Kota ). , Rotalink Plus (Advancer & Burr) - Ce Approved (Compatible With Existing Rota Machine Cath Lab Gmc Kota , Rotalink Plus (Advancer And Burr) – Dcgi Approved (Compatible With Existing Rota Machine Cath Lab Gmc Kota , Rotational Atherectomy Guide Wires - Us Fda Approved , Rotational Atherectomy Guide Wires - Ce Approved , Rotational Atherectomy Guide Wires –Dcgi Approved , Rotaglide Lubricant - Us Fda Approved , Rotaglide Lubricant - Ce Approved , Rotaglide Lubricant – Dcgi Approved , Rotawire – Us Fda Approved Should Be Compatible To Rota Machine In Cath Lab Gmc Kota , Rotawire – Dcgiapproved Should Be Compatible To Rota Machine In Cath Lab Gmc Kota. , Heart Pump Catheter And Smartassist Sensor ? Usfda & Ce Approved Percutaneous Heart Pump Capable Of Pumping Blood @ 3.5-5 L/Min To Provide Hemodynamic Support For Hemodynamic Stabilization To Enable Heart Recovery. Maintain Patient Hemodynamics During Planned Temporary Coronary Occlusions By Maintaining Mean Arterial Pressure (Map), Which May Allow For A More Thorough Procedure And A More Complete Revisualization Ma Single Session. , Nirs+Ivus Catheter ? Usfda & Japan Pmda Approved Near Infrared Spectroscopy & Intravascular Imaging Catheter For Detection Of Lipid Core Plaques (Lcp) And Assessment Of Vessel Structure With An Automatically Adjustable Frequency Bandwidth Of 35-65 Mhz Depending On The Need Of The Calcium With A Pullback Speed Upto 2Mm/Sec And A Pullback Length If 150 Mm. Catheter Working Length Of 160 Cm , Ivus Catheter With Accessories - Usfda Approved ? Compitable To Volcano Imaging Machine In Cath Lab, Govt.Medical College Kota- , Ivus Catheter With Accessories - Ce/Dcgi Approved ? Compitable To Volcano Imaging Machine In Cath Lab, Govt.Medical College Kota- , Shockwave I.V.L Intravascularlithotripsy Catheter System With Connector Cable - Dcgi With Us Fda / Ce Approved , I.V.L Indegenous Intravascularlithotripsy Catheter System With Connector Cable – Dcgi , Ivus Catheter Hd 60 Mhz Coronary Imaging Catheters. - Us Fda Approved Should Be Compatible With Available Machine , Ivus Catheter Hd 60 Mhz Coronary Imaging Catheters. – Ce/Dcgi Approved Should Be Compatible With Available Machine , Ivus Catheter40 Mhz Coronary Imaging Catheters. - Us Fda Approved Should Be Compatible With Available Machine , Ivus Catheter40 Mhz Coronary Imaging Catheters. - Us Fda Approved Should Be Compatible With Available Machine , Laser Atherectomy Catheter X-80 Catheters With Guidewire Compatanility Of 0.014 Inch , Guiding Catheter Compatability Of 6F, Maximum Tip Outer Diameter Ofm 0.038Inch , Maximum Shaft Outer Diameter Of 0.049 Inchwith A Working Length Of 100 Mm , Capability To Generate A Fluence Of 30- 80 Mj/Mm2 With A Repitation Rate Of 25-80 Hertz. Available In 0.9 Mm And 1.4 Mm Sizes. , Fractional Flow Reserve Pressure Wire 1. Shouldbe0.014”Guidewire. 2. Should Have High-Fidelity Piezo Electric Pressure Sensor Technology For Measurement Of Intravascular Pressure. 3. The System Should Work Wireless Radio Using Frequency-Hopping Spread Spectrum To Ensure Secured Radio Connection With Pressurewire 4. Thepressurewireshouldbecapableofwiredconnectiontoffrmachine. 5. Shouldhavesensorhousingdesignwithmultiplelargewindows(Multiwindow Jacket). 6. Shouldhaveaflatcoretipdesignforabettershapeability&Shaperetention. 7. Shouldpreferablyhavehydrophiliccoating 8. Shouldhavearadioopaquetip. 9. Shouldhaveoperatingpressurerangeof-30To+300Mmhg. 10.Should Have Frequency Response Of Dc To 25 Hz. 11.Should Have Radio Range Of At Least 2M. 12.Should Have Battery Time Of Transmitter For At Least 3 Hours. 13.Should Have A Wireless Transmission Frequency Range Of 2.4000 – 2.4835 Ghz , Oct Catheter: Catheter For Intracoronary Oct, 0.014 Guidewire And 6 F Guide Catheter Compatibility. Lubricous Hydrophilic Coating And Low Tip Entry Profile For Crossing Tight, Distal Lesions.2.7 F Crossing Profile And Supportive Proximal Shaft Provide Superb Deliverability To The Area Of Interest. Lens Marker Is Immediately Proximal To Imaging Lens And The Distance Of Lens Marker From Tip Should Be 23 Mm And Proximal Marker At 82 Mm From The Lens Marker. Threeradiopaque Marker , Temporary Bipolar Pacing Catheter- Flow Directed 1. Should Be Us Fda & Dcgi Approved 2. Should Be Latex Balloon Tipped, Flow Guided For Stable Insertion. 3. Should Have 10 Cm Depth Markers To Enhance Placement. 4. Should Have Smooth, Polyurethane Hemocompatible Coating. 5. Should Have Clearly Marked Terminals. 6. Should Have Shrouded 2 Mm Pin Connector Leads. 7. Should Have Platinum Electrodes 8. It Should Have Flexible Tip Design For Delicate Placement. , Temporary Bipolar Pacing Catheter- Torque Control 1. Should Be Us Fda & Dcgi Approved 2. Should Have 10 Cm Depth Markers To Enhance Placement. 3. Should Have Smooth, Polyurethane Hemocompatible Coating. 4. Should Have Clearly Marked Terminals. 5. Should Have Shrouded 2 Mm Pin Connector Leads. 6. Should Have Stainless Steel Centre Conductor And Stainless Steel Electrodes. 7. It Should Have Solid Core Enables User To Customize The Curve. 8. Should Have Optimal Torque Control For Challenging Anatomy , Orbital Atherectomy Device 6F Compatible Orbital Atherectomy Device With 1.25Mm Diamond Coated Crown Designed For Bidirectional Superficial Calcium Sanding And Modify Deep Calcium Through Pulsatile Forces To Facilitates Stent Delivery And Expansion In Severely Calcified Lesions With Durable Nitinol Guidewire With 0.12” Proximal And 0.14” Distal End Along With Viper Slide Lubricant , Oas Pump Provides The Saline Pumping Mechanism And Power To The Oad With 250 V 4A Slow Blow, 1/4” X 1 - 1¼” Meter Fuse, Abs Plastic External Housing, (100–240 Vac @ 50–60 Hz) External Connector. Includes A Bult In Audible Information Signal For Approximately Every 25 Sec Of Oad Spin Time. Audible Information Signal Every 5 Sec For A Total Of 30 Sec When The Saline Level Falls Below 200 Ml.During A Treatment Period. The Small, Reusable, And Portable Oas Pump Attaches To A Standard Five-Wheel Rolling Intravenous (Iv) Pole Or Table Mount Pole. , Pressure Wire For Ffr/Dfr – Usfda , Pressure Wire For Ffr/Dfr – Ce/Dcgi , Iabp Catheter With Accessories - Us Fda Approved Should Be Compatible With Existing Machine (Data Scope) In Cath Lab, Gmck , Iabp Catheter With Accessories - Ce Approved Should Be Compatible With Existing Machine (Data Scope) In Cath Lab, Gmck , Iabp Catheter With Accessories Dcgi Approved Should Be Compatible With Existing Machine (Data Scope) In Cath Lab, Gmck , Tpi Lead – Usfda Approved , Tpi Lead – Ce Approved , Tpi Lead – Dcgi Approved , Vascular Closure Device With Bio Absorbable Pga Suture That Provide A Secure Seal •Bioabsorbable Collagen Designed, •Low Profile Bioabsorbable Anchor (50:50 Blend Glycolide And Lactide Polyer) •Must Have Bovine Collagen Plug. Must Have 9 Hole V-Twist Pattern Suture Weave. •Must Be Available In 6F And 8F Sizes. Usfda+Pmda Approved , Vascular Closure Device With Bio Absorbable Pga Suture That Provide A Secure Seal •Bioabsorbable Collagen Designed, •Low Profile Bioabsorbable Anchor (50:50 Blend Glycolide And Lactide Polyer) •Must Have Bovine Collagen Plug. Must Have 9-Hole V-Twist Pattern Suture Weave. •Must Be Available In 6F And 8F Sizes. Ce/Dcgi Approved , Everolimus Eluting Cobalt Chromium Stent – Usfda Approved ? Everolimus Eluting Cobalt Chromium Stent With Peak To Valleynon-Linear Links With Narrower And Slimmer Crests And Ultra- Low Crossing Profile Of 0.039 Inches For Precise Placement And Zero Transition Distal Shaft. Should Have Flourinated Co- Polymer. Should Come In Diameters From 2.00 Mm To 4.00 Mm With 5.5 Mm Post-Dilatation Capability For 3.5 Mm And 4.0 Mm Stents , Everolimus Eluting Cobalt Chromium Stent – Ce/Dcgi Approved ? Everolimus Eluting Cobalt Chromium Stent With Peak To Valley Non Linear Links With Narrower And Slimmer Crests And Ultra-Low Crossing Profile Of 0.039 Inches For Precise Placement And Zero Transition Distal Shaft. Should Have Flourinated Co-Polymer. Should Come In Diameters From 2.00 Mm To 4.00 Mm With 5.5 Mm Post-Dilatation Capability For 3.5 Mm And 4.0 Mm Stents , Everolimus Eluting Cobalt Chromium Stent – Usfda Approved ? Everolimus Eluting Cobalt Chromium Stent With Peak To Valley Taller Non Linear Links And True Centre Tip Technology For Precise Placement And Zero Transition Distal Shaft. Should Have Flourinated Co-Polymer. Should Come In Diameters From 2.00 Mm To 4.00 Mm , Everolimus Eluting Cobalt Chromium Stent – Ce/Dcgi Approved ? Everolimus Eluting Cobalt Chromium Stent With Peak To Valley Taller Non Linear Links And True Centre Tip Technology For Precise Placement And Zero Transition Distal Shaft. Should Have Flourinated Co-Polymer. Should Come In Diameters From 2.00 Mm To 4.00 Mm , Everolimus Eluting Cobalt Chromium Stent – Usfda Approved ? Everolimus Eluting Cobalt Chromium Stent With Peak To Valley Taller Non Linear Links And 5 Fold Balloon Technology And Should Have Flourinated Co Polymer. Skive Technology To Have A Better Pushability. Should Come In Diameters From 2.00 Mm To 4.00 Mm. , Everolimus Eluting Cobalt Chromium Stent – Ce/Dcgi Approved ? Everolimus Eluting Cobalt Chromium Stent With Peak To Valley Taller Non Linear Links And 5 Fold Balloon Technology And Should Have Flourinated Co Polymer. Skive Technology To Have A Better Pushability. Should Come In Diameters From 2.00 Mm To 4.00 Mm. , Everolimus Eluting Cobalt Chromium Stent – Logn Length Usfda Approved ? Everolimus Eluting Cobalt Chromium Stent With Peak To Valley Taller Non Linear Links And 5 Fold Balloon Technology And Should Have Flourinated Co Polymer. Skive Technology To Have A Better Pushability. Should Come In Diameters From 2.00 Mm To 4.00 Mm Upto 48 Mm Length. , Everolimus Eluting Cobalt Chromium Stent – Logn Length - Ce Approved ? Everolimus Eluting Cobalt Chromium Stent With Peak To Valley Taller Non Linear Links And 5 Fold Balloon Technology And Should Have Flourinated Co Polymer. Skive Technology To Have A Better Pushability. Should Come In Diameters From 2.00 Mm To 4.00 Mm Upto 48 Mm Length. , Everolimus Eluting Cobalt Chromium Stent – Usfda Approved ? Usfda Approved Everolimus Eluting Cobalt Chromium Stent With Peak To Valley Taller Non Linear Links And Dual Layer Pebax Balloon Technology And Should Have Flourinated Co Polymer. Ss Junction Support Mandrel To Have A Better Pushability. Should Come In Diameters From 2.00 Mm To 4.00 Mm. , Everolimus Eluting Cobalt Chromium Stent – Ce/Dcgi Approved ? Usfda Approved Everolimus Eluting Cobalt Chromium Stent With Peak To Valley Taller Non Linear Links And Dual Layer Pebax Balloon Technology And Should Have Flourinated Co Polymer. Ss Junction Support Mandrel To Have A Better Pushability. Should Come In Diameters From 2.00 Mm To 4.00 Mm. , Everolimus Eluting Platinum Chromium Stent - Durable Polymer– Usfda Approved , Everolimus Eluting Platinum Chromium Stent - Durable Polymer – Ce/Dcgi Approved , Everolimus Eluting Platinum Chromium Stent – Biodegradable Polymer - Ce/Dcgi Approved , Everolimus Eluting Platinum Chromium Stent – Biodegradable Polymer -Ce/Dcgi Approved , Sirolimus Eluting Cobalt-Chromium Stent With Abluminal Gradient Coating - (L-605 Co-Cr Alloy) – Usfda/Pmda (Should Not Have Drug & Polymer Coating On Joints & Bends). 2 Links – 8 Crown Design •Bioresorbable Polymer Of Plcl (Poly Lactic Acid + Poly Capro Lactone Pcl) With Degradation Time Of 3-4 Months. Should Have Bioinspired Open Cell In Phase Design. •Low Concentration Of Sirolimus (0.8Ug/Mmsq). •Minimum Tip Entry Profile Of 0.42Mm , Sirolimus Eluting Cobalt-Chromium Stent With Abluminal Gradient Coating - (L-605 Co-Cr Alloy) – Ce/Dcgi (Should Not Have Drug & Polymer Coating On Joints & Bends). 2 Links – 8 Crown Design •Bioresorbable Polymer Of Plcl (Poly Lactic Acid + Poly Capro Lactone Pcl) With Degradation Time Of 3-4 Months. Should Have Bioinspired Open Cell In Phase Design. •Low Concentration Of Sirolimus (0.8Ug/Mmsq). Minimum Tip Entry Profile Of 0.42Mm , Optimized Overexpansion, Up To 6.25 Mm For Large Vessel- Sirolimus Eluting Cobalt-Chromium Stent With Advanced Core Wire Shaft Technology & Abluminal Gradient Coating - (L-605 Co-Cr Alloy) – Usfda/Pmda ? Should Not Have Drug & Polymer Coating On Joints & Bends. 2 Links – 8 & 10 Crown Design ? Must Have Advanced Core Wire Shaft Technology. ? Should Have An Over Expansion Limit Of More Than 1.5 Mm Of The Stated Diameter ? Must Have Rounded & Flexible Tip Made Up Of Polyamide Elastomer. ? Bioresorbable Polymer Of Plcl (Poly Lactic Acid + Poly Caprolactone Pcl) With Degradation Time Of 3-4 Months. Should Have Bioinspired Open Cell In Phase Design. Low Concentration Of Sirolimus (0.8Ug/Mmsq), Tip Entry Profile Of 0.42Mm. , Optimized Overexpansion, Up To 6.25 Mm For Large Vessel- Sirolimus Eluting Cobalt-Chromium Stent With Advanced Core Wire Shaft Technology & Abluminal Gradient Coating - (L-605 Co-Cr Alloy) – Ce/Dcgi ? Should Not Have Drug & Polymer Coating On Joints & Bends. 2 Links – 8 & 10 Crown Design ? Must Have Advanced Core Wire Shaft Technology. ? Should Have An Over Expansion Limit Of More Than 1.5 Mm Of The Stated Diameter ? Must Have Rounded & Flexible Tip Made Up Of Polyamide Elastomer. ? Bioresorbable Polymer Of Plcl (Poly Lactic Acid + Poly Caprolactone Pcl) With Degradation Time Of 3-4 Months. Should Have Bioinspired Open Cell In Phase Design. Low Concentration Of Sirolimus (0.8Ug/Mmsq), Tip Entry Profile Of 0.42Mm. , Sirolimus Eluting With Probio Coating Stent – Usfda Approved Sirolimus Eluting Cobalt Chromium Stents, Ultrathin Struts 60 Um. Should Have Coating Passive Probio Coating (Amorphous Silicon Carbide). Should Have Active Coating Bio Lute Bioabsorbable Ploy-L-Lactide. Should Be Usfda Approved. , Sirolimus Eluting With Probio Coating Stent – Ce/Dcgi Approved Sirolimus Eluting Cobalt Chromium Stents, Ultrathin Struts 60 Um. Should Have Coating Passive Probio Coating (Amorphous Silicon Carbide). Should Have Active Coating Bio Lute Bioabsorbable Ploy-L-Lactide. Should Be Usfda Approved. , Sirolimus Eluting With Silicon Carbide Coating Stent – Usfda Approved Sirolimus Eluting Cobalt Chromium Stents With Amorphous Silicon Carbide Coating. Should Be Usfda Approved. , Sirolimus Coated Stainless Steel Stent – Ce Approved ?Porus Surface, Shellac Resin (Wax-Free), Bioresorbable Polymer , Sirolimus Eluting Cobalt Chromium Platform, - Us Fda / Ce Approved ? Biodegradable Polymer, And Microporus ? Surface With Soft Coating Of Shellac Rasin. , Sirolimus Cluting, Stainless Steel Platform, - Us Fda / Ce Approved ? Biodegradable Polymer, Microporus Surfacewith Soft Coating Of Shellac Rasin With Temperature Control Packing & Temperature ? Sensitive Check Meter. , Dual Drug Polymer Free Drug Eluting Stent - Dcgi With Us Fda /Ce Approved ? Should Have Cobalt Chromium Platform With Prubocol Drug At Place Of Polymer. ? Should Have No Polymer. ? Abluminal Coating On Microporus Surface With Soft Coating Of Shellac Rasin. , Dual Drug Polymer Free Drug Eluting Stent - Dcgi Approved ? Should Have Cobalt Chromium Platform With Prubocol Drug At Place Of Polymer. ? Should Have No Polymer. Abluminal Coating On Microporus Surface With Soft Coating Of Shellac Rasin. , Bio-Resorbable Scaffold (Brs) ? Sirolimus Eluting Bio-Resorable Scaffold Stent System - Dcgi With Us Fda / Ce Approved ? All Sizes And Diameter , Sirolimus Coated Drug Stent - Ce Approved • Open Cell Design Only With Two Connectors Between The Rings, Stent Material: Cocr Per Astm F562 • 60? Ultra-Thin Struts Across All Diameters And Lengths • Crossing Profile Of = 0.97Mm Tip Entry Profile: 0.017”, Ldz Link: Long Dual ‘Z’ Link • Rbp: 16 Atm • Length (Mm): 8 To 48 Mm • Diameter(Mm): 2.25 To 4.00 Mm , Sirolimus Coated Drug Stent - Dcgi Approved • Open Cell Design Only With Two Connectors Between The Rings, Stent Material: Cocr Per Astm F562 • 60? Ultra-Thin Struts Across All Diameters And Lengths • Crossing Profile Of = 0.97Mm Tip Entry Profile: 0.017”, Ldz Link: Long Dual ‘Z’ Link • Rbp: 16 Atm • Length (Mm): 8 To 48 Mm • Diameter(Mm): 2.25 To 4.00 Mm , Everolimus Coated Drug Eluting Cobalt Chromium Coronary Stent - Dcgi Approved • Everolimus Drug Eluting Stent, Open Cell Design Only With Two Connectors Between The Rings • Stent Material & Design: L-605 Co-Cr Alloy With Laser Cut Seamless Tubing In Serpentine Pattern. • 60? Ultra-Thin Struts Across All Diameters And Lengths, Crossing Profile Of = 0.97Mm, Tip Entry Profile: 0.017” • Ldz Link: Long Dual ‘Z’ Link, Ifu Labeled Overexpansion Of The Highest Available Diameter Should Be = 5.50 Mm • Rbp: 16 Atm • Length (Mm): 8 To 48 Mm • Diameter(Mm): 2.25 To 4.00 Mm , Sirolimus Coated Drug Stent Ce Approved • Open Cell Design Only With Two Connectors Between The Rings • Stent Material & Design: L-605 Co-Cr Alloy With Laser Cut Seamless Tubing In Serpentine Pattern. • 60? Ultra-Thin Struts Across All Diameters And Lengths -Long Link Design • Crossing Profile Of = 0.97Mm,M Tip Entry Profile: 0.41Mm • Rbp: 16 Atm • Length (Mm): 8 To 48 Mm • Diameter(Mm): 2.25 To 4.00 Mm , Sirolimus Coated Drug Stent Dcgi Approved • Open Cell Design Only With Two Connectors Between The Rings • Stent Material & Design: L-605 Co-Cr Alloy With Laser Cut Seamless Tubing In Serpentine Pattern. • 60? Ultra-Thin Struts Across All Diameters And Lengths -Long Link Design • Crossing Profile Of = 0.97Mm,M Tip Entry Profile: 0.41Mm • Rbp: 16 Atm • Length (Mm): 8 To 48 Mm • Diameter(Mm): 2.25 To 4.00 Mm , Covered Stent Usfda Approved , Covered Stent Ce/Dcgi Approved , Covered Coronary Stents - Us Fda Approved , Covered Coronary Stents – Ce/Dcgi Approved Covered Graft Stent For Dissected Artery , Guidewire For Peripheral Intervention – Nitinol Alloy Regular Length ? Tip Load Options Of 6 G, Nitinol Lengths Of 10 Cm , Guidewire For Peripheral Intervention – Nitinol Alloy Regular Length ? Tip Load Options Of 4 G, Nitinol Lengths Of 25 Cm , Guidewire For Peripheral Intervention – Nitinol Alloy Regular Length– ? Tip Load Options Of 3.5 G, Nitinol Lengths Of 40 Cm , Guidewire For Peripheral Intervention – Nitinol Alloy Regular Length– ? Tip Load Options Of 2.8 G, Nitinol Lengths Of 40 Cm , Guidewire For Peripheral Intervention – Stainless Steel, Regular Length ? .018Short Taper, Bare Coil, Core To Tip, Tip Load – 4.6 Gm , Pta Balloon – 12-200Mm - Usfda ? Diameters 1.5, 2.0, 2.5, 3.0, And 4.0 Mm, Length – 12, 20, 40, 60, 80, 120, 200 ? 4F Sheath Compatible, Hydrophilic Coating, Tungsten Markers, Np- 8, Rbp - 14 , Pta Balloon - 12-200Mm – Ce/Dcgi ? Diameters 1.5, 2.0, 2.5, 3.0, And 4.0 Mm, Length – 12, 20, 40, 60, 80, 120, 200 ? 4F Sheath Compatible, Hydrophilic Coating, Tungsten Markers, Np- 8, Rbp - 14 , Pta Balloon – 20-200Mm - Usfda Approved ? Diameters 2.0, 2.5, 3.0, 4.0, 5.0, 5.5, 6.0, Length – 20, 40, 60, 80, 120, 150, 180, 200 ? 4F/5F Sheath Compatible, Hydrophilic Coating, Tungsten Markers, Np- 8, Rbp – 14 ? Coaxial, Over-The-Wire Design,One-Piece Catheter Construction,Hydrophobic Coating , Pta Balloon – 20-200Mm Ce/Dcgi ? Diameters 2.0, 2.5, 3.0, 4.0, 5.0, 5.5, 6.0, Length – 20, 40, 60, 80, 120, 150, 180, 200 ? 4F/5F Sheath Compatible, Hydrophilic Coating, Tungsten Markers, Np- 8, Rbp – 14 ? Coaxial, Over-The-Wire Design,One-Piece Catheter Construction,Hydrophobic Coating , Pta Balloon – 20-250Mm - Usfda ? Diameters 3 -12 Mm, Length – 20, 40, 60, 80, 120, 150, 200, 250 ? 5-7 F Sheath Compatible, Hydrophilic Coating, Tungsten Markers, , Pta Balloon – 20-250Mm – Ce/Dcgi ? Diameters 3 -12 Mm, Length – 20, 40, 60, 80, 120, 150, 200, 250 ? 5-7 F Sheath Compatible, Hydrophilic Coating, Tungsten Markers, , Pta Balloon – 15-40Mm – Usfda ? Diameters 4 -7 Mm, Lengths Of 15 Mm, 20 Mm, 30 Mm, And 40 Mm ? Xcelon Balloon Material With A 14 Atm Rbp,Hydrophobic Coated Shaft And Balloon,Np- 8, Rbp – 14 , Pta Balloon – 15-40Mm – Ce/Dcgi ? Diameters 4 -7 Mm, Lengths Of 15 Mm, 20 Mm, 30 Mm, And 40 Mm Xcelon Balloon Material With A 14 Atm Rbp,Hydrophobic Coated Shaft And Balloon,Np- 8, Rbp – 14 , Pta Balloon Dilatation Catheter – Usfda ? Diameters 3 -12 Mm, Length – 20, 30, 40, 60, 80, 100, 120, 150, 200 -? Up To 24 Atm (2431 Kpa) Rated Burst Pressure ? Nybax Balloon Material, 3 Wings On 3-5 Mm, 5 Wings On 6 Mm And Plus, Mediglide Hydrophilic Coating , Pta Balloon Dilatation Catheter – Ce/Dcgi ? Diameters 3 -12 Mm, Length – 20, 30, 40, 60, 80, 100, 120, 150, 200 ? Up To 24 Atm (2431 Kpa) Rated Burst Pressure Nybax Balloon Material, 3 Wings On 3-5 Mm, 5 Wings On 6 Mm And Plus, Mediglide Hydrophilic Coating , Ultra-High-Pressure Balloon -With Pressures Up To 40 Atm - Usfda ? Diameters 4 -12 Mm, Length – 20, 30, 40, 60, 80, 100 - ? Up To 40 Atmrated Burst Pressure , Ultra-High-Pressure Balloon -With Pressures Up To 40 Atm -Ce/Dcgi ? Diameters 4 -12 Mm, Length – 20, 30, 40, 60, 80, 100 Up To 40 Atmrated Burst Pressure , 0.018” Balloon Dilatation Catheter - Usfda ? 0.020” Lesion Entry Profile On A 0.018” Wire ? 2-10 Mm Diameters, 10-220 Mm Lengths , 0.018” Balloon Dilatation Catheter -Ce/Dcgi ? 0.020” Lesion Entry Profile On A 0.018” Wire 2-10 Mm Diameters, 10-220 Mm Lengths , 0.035” Balloon Dilatation Catheter -Usfda ? 0.020” Lesion Entry Profile On A 0.018” Wire ? 12, 14, 16, 18 Mm Diameters, 20, 40, 60 Mm Lengths , 0.035” Balloon Dilatation Catheter -Ce/Dcgi ? 0.020” Lesion Entry Profile On A 0.018” Wire 12, 14, 16, 18 Mm Diameters, 20, 40, 60 Mm Lengths , 0.014” Balloon Dilatation Catheter -Usfda ? 0.017 Lesion Entry Profile, Nybax Balloon Material , 0.014” Balloon Dilatation Catheter -Ce/Dcgi 0.017 Lesion Entry Profile, Nybax Balloon Material , Cutting Balloon For Renal And Peripheral Arteries - Us Fda Approved ?Monorail (Rapid Exchange) And Over-The-Wire (Otw) Balloons Available In The Sizes And Lengths , Cutting Balloon For Renal And Peripheral Arteries - Ce Approved ?Monorail (Rapid Exchange) And Over-The-Wire (Otw) Balloons Available In The Sizes And Lengths , Cutting Balloon For Renal And Peripheral Arteries - Dcgi Approved ?Monorail (Rapid Exchange) And Over-The-Wire (Otw) Balloons Available In The Sizes And Lengths , Otw Balloon For Periferal Angioplasty All Size And Diameters- Ce/ Fda Approved , Otw Balloon For Periferal Angioplasty All Size And Diameters- Dcgi Approved , Btk Everolimus Eluting Resorbable Scaffold System – Usfda , Btk Everolimus Eluting Resorbable Scaffold System – Ce/Dcgi , Peripheral Self Expandable Interwoven Nitinol Stent Forsuperficial Femoral Artery (Sfa) And / Or Proximal Popliteal Artery- Usfda Approved , Peripheral Self Expandable Interwoven Nitinol Stent Forsuperficial Femoral Artery (Sfa) And / Or Proximal Popliteal Artery- Dcgi/Ce Approved , Self-Expanding Peripheral Stent – Usfda Approved ? Tri-Axial Technology Specifications, Flexible Nitinol Material , Self-Expanding Peripheral Stent – Ce/Dcgi Approved ? Tri-Axial Technology Specifications, Flexible Nitinol Material , Balloon-Expanding Peripheral Stent – Usfda Approved ? Cobalt Chromium Multi-Link Technology, Dual-Layer Balloon , Balloon-Expanding Peripheral Stent – Usfda Approved ? Cobalt Chromium Multi-Link Technology, Dual-Layer Balloon , Renal Stent System – Usfda Approved ? Cobalt Chromium Multi-Link Technology , Renal Stent System – Ce/Dcgi Approved Cobalt Chromium Multi-Link Technology , Carotid Stent – Usfda ? Closed-Cell Design For Crush Resistance,Rotational Deployment Handle With Freestyle,U- And S-Shaped Connectors , Carotid Stent – Ce/Dcgi ? Closed-Cell Design For Crush Resistance,Rotational Deployment Handle With Freestyle,U- And S-Shaped Connectors , Carotid Stent – Usfda Straight And Tapered Stent Options, Nitinol Material , Carotid Stent – Ce/Dcgi Closed-Cell Design For Crush Resistance,Rotational Deployment Handle With Freestyle,U- And S-Shaped Connectors , Embolic Protection System – Usfda Centered Wire Design, Circumferential Nitinol Frame, Platinum-Tungsten Frame Coils, Barewir Technology , Embolic Protection System – Ce/Dcgi Centered Wire Design, Circumferential Nitinol Frame, Platinum-Tungsten Frame Coils, Barewir Technology , Vascular Plug – Single Lobe , Vascular Plug- Multi-Layered Mesh Designed, Six Planes Of Cross Sectional Coverage , Suture-Mediated Closure And Repair System – Usfda Approved , Suture-Mediated Closure (Smc) For Both Arterial And Venous Access – Usfda , Suture-Mediated Closure (Smc) For Both Arterial And Venous Access – Ce/Dcgi , Renal And Biliary Premounted Stent System – Usfda Macr Elements And Additional Proximal Connectors , Renal And Biliary Premounted Stent System – Ce/Dcgi Macr Elements And Additional Proximal Connectors , Drug Coated Balloon For Pta – Usfda Transpax Coating,Paclitaxel-Coated Pta Balloon Catheter , Drug Coated Balloon For Pta – Usfdace/Dcgi Transpax Coating,Paclitaxel-Coated Pta Balloon Catheter , Carotid Stent – Usfda Approved Closed Cell Design, , Carotid Stent – Ce/Dcgi Approved Closed Cell Design, , Iliac And Biliary Premounted Stent System – Usfda Macro Elements Engineered , Iliac And Biliary Premounted Stent System – Ce/Dcgi Macro Elements Engineered , Renal And Biliary Premounted Stent System – Usfda Tandem Architectur Stent Design , Renal And Biliary Premounted Stent System – Ce/Dcgi Tandem Architectur Stent Design , Self Expanding Peripheral Stent – Usfda Approved , Peripharel Drug-Eluting Vascular Stent -Usfda , Peripharel Drug-Eluting Vascular Stent -Ce/Dcgi , Self-Expanding Stent System For Iliac – Usfda , Self-Expanding Stent System For Iliac – Ce/Dcgi , Distal Protection Device 0.014 Wire Umbrella Type Coronary Filter - Us Fda/Ce Approved , Distal Protection Device 0.014 Wire Umbrella Type Coronary Filter - Dcgi Approved , Distal Protection Device 0.014 Wire Umbrella Type Carotid Artery Filter - Us Fda/Ce Approved , Distal Protection Device 0.014 Wire Umbrella Type Carotid Artery Filter - Dcgi Approved , Embolic Protection Devices Based On Filter Technology/Mechanism - Us Fda Approved , Embolic Protection Devices Based On Filter Technology/Mechanism - Dcgi Approved , Embolic Protection Devices With Distal Balloon Occlusive Techonology - Us Fda Approved , Embolic Protection Devices With Distal Balloon Occlusive Techonology-Ce Approved , Embolic Protection Devices With Distal Balloon Occlusive Techonology - Dcgi Approved , Distal Embolic Protection Device - Us Fda Approved ? Should Be Made Of Polyurethane With Radio-Opaque Nitinol Loop ?Should Be Suspended On The .014” Wire With A Suspension Arm. ?Should Not Occlude Flow While In Placement, Should Be Rapid Exchange Type ? Should Be Compatible With A 6 F Guiding Catheter (0.066” Id) Should Allow Optimal Filtration In Vessels 3.5 - 5.5 Mm Size , Distal Embolic Protection Device – Ce/Dcgi Approved ? Should Be Made Of Polyurethane With Radio-Opaque Nitinol Loop ?Should Be Suspended On The .014” Wire With A Suspension Arm. ?Should Not Occlude Flow While In Placement, Should Be Rapid Exchange Type ? Should Be Compatible With A 6 F Guiding Catheter (0.066” Id) Should Allow Optimal Filtration In Vessels 3.5 - 5.5 Mm Size , Peripheral Cutting Balloon Catheter - Us Fda Approved ? Should Be Available In Balloon Od Of 3-6 Mm ? Should Have Up To 15 Mm Or Up To 20 Mm Working Length , Peripheral Cutting Balloon Catheter – Ce/Dcgi Approved ? Should Be Available In Balloon Od Of 3-6 Mm ? Should Have Up To 15 Mm Or Up To 20 Mm Working Length Catheter Shaft Length Should Be Up To 140 Cm , Balloon In Balloon Catheter (Bib)- Dcgi With Us Fda /Ce Approved , Plaque Modification Device For Highly Calcified Lesions - Dcgi With Us Fda / Ce Approved ? Available In The Sizes And Length ? Should Be Along With Support Accessories ? Super High Pressure Balloon Dialation Catheter Non Compliant Rbp -35 Bar Must Be Twin Layer In Balloon With Low Lesion Entry Profile”0.16” , Ivc Filter – Us Fda Approved ?For Optimal Filtration Of Ivc Diameter Of Up To 40 Mm ?Made Of Either Nitinol Or Stainless Steel ?Catheter Carrier System Inner Diameter Should Be Of Maximum 12 F ?It Should Be Possible To Insert From Either Jugular Or Femoral Access Should Be For Permanent Use , Ivc Filter – Ce Approved ?For Optimal Filtration Of Ivc Diameter Of Up To 40 Mm ?Made Of Either Nitinol Or Stainless Steel ?Catheter Carrier System Inner Diameter Should Be Of Maximum 12 F ?It Should Be Possible To Insert From Either Jugular Or Femoral Access Should Be For Permanent Use , Ivc Filter – Dcgiapproved ?For Optimal Filtration Of Ivc Diameter Of Up To 40 Mm ?Made Of Either Nitinol Or Stainless Steel ?Catheter Carrier System Inner Diameter Should Be Of Maximum 12 F ?It Should Be Possible To Insert From Either Jugular Or Femoral Access Should Be For Permanent Use , Endovascular Stent Graft Device For Treatment Of Thoracic Aortic Aneurysms And Dissections - Us Fda Approved ?Device Should Be With Proximal Barbs, With Or Without Distal Bare Spring Configuration, And Should Be Tapered Or Non – Tapered. ?The Aortic Device Should Be Available In Any One Or More Of The Following Sizes: Od 26-44Mm; Length 4-24 Cm. The Device Should Be Able To Be Advanced On Up To 24 Fr Shaft Size. The Manufacturer Should Agree To Supply The Size Customized To The Patient’S Anatomy Based On Ct Angiography , Endovascular Stent Graft Device For Treatment Of Thoracic Aortic Aneurysms And Dissections – Ce/Dcgi Approved ?Device Should Be With Proximal Barbs, With Or Without Distal Bare Spring Configuration, And Should Be Tapered Or Non – Tapered. ?The Aortic Device Should Be Available In Any One Or More Of The Following Sizes: Od 26-44Mm; Length 4-24 Cm. The Device Should Be Able To Be Advanced On Up To 24 Fr Shaft Size. The Manufacturer Should Agree To Supply The Size Customized To The Patient’S Anatomy Based On Ct Angiography , Endovascular Stent Graft Device For Treatment Of Abdominal Aortic Aneurysms – Usfda Approved ?Device Should Be With Proximal Barbs, With Or Without Distal Bare Spring Configuration, And Should Be Either Tapered Or Non – Tapered ?Devices With Trans-Renal Or Suprarenal Fixation Should Be Quoted. ?The Aortic Device Should Be Available In Any 1 Or More Of The Following Sizes: Od 12-44Mm; Length 4-24 Cm. The Device Should Be Able To Be Advanced On Up To 24 Fr Shaft Size. ?The Limb Extensions Of The Main Device For Abdominal Aortic Applications Should Be Available In 12-22 Mm Diameter, With Or Without Flared Ends And Up To 12 Cm In Length The Manufacturer Should Agree To Supply The Size Customized To The Patient’S Anatomy Based On Ct Angiography , Endovascular Stent Graft Device For Treatment Of Abdominal Aortic Aneurysms – Ce/Dcgi Approved ?Device Should Be With Proximal Barbs, With Or Without Distal Bare Spring Configuration, And Should Be Either Tapered Or Non – Tapered ?Devices With Trans-Renal Or Suprarenal Fixation Should Be Quoted. ?The Aortic Device Should Be Available In Any 1 Or More Of The Following Sizes: Od 12-44Mm; Length 4-24 Cm. The Device Should Be Able To Be Advanced On Up To 24 Fr Shaft Size. ?The Limb Extensions Of The Main Device For Abdominal Aortic Applications Should Be Available In 12-22 Mm Diameter, With Or Without Flared Ends And Up To 12 Cm In Length The Manufacturer Should Agree To Supply The Size Customized To The Patient’S Anatomy Based On Ct Angiography , Renal Denervation Device For Rf Ablation Of Renal – Ce / Us Fda Approved , Renal Denervation Device For Rf Ablation Of Renal –Dcgiapproved , C.P. Stent Covered – Ce Approved Should Be Balloon Mounted. , C.P. Stent Covered – Us Fda Approved , C.P. Stent Covered – Dcgiapproved , Amplatzer Plug – Ce Approved , Amplatzer Plug – Us Fda Approved , Amplatzer Plug – Dcgiapproved , Snare For Periferal Use – Us Fda/Ceapproved , Snare For Periferal Use – Dcgiapproved , Long Artrial Sheeth 6F/7F/8F Length >=90 Cm – Braided –Us Fda/ Ce Approved , Long Artrial Sheeth 6F/7F/8F Length >=90 Cm – Braided – Dcgiapproved , Long Artrial Sheeth 6F/7F/8F Length >=90 Cm – Un Braided– Us Fda/ Ce Approved , Long Artrial Sheeth 6F/7F/8F Length >=90 Cm – Un Braided– Dcgiapproved , Long Artrial Sheeth Upto 90 Cm - Braided – Us Fda/ Ce Approved , Long Artrial Sheeth Upto 90 Cm - Braided – Dcgiapproved , Long Artrial Sheeth Upto 90 Cm - Unbraided – Us Fda/ Ce Approved , Long Artrial Sheeth Upto 90 Cm - Unbraided – Dcgiapproved , Cross – Over Sheeth - Braided – Us Fda/ Ce Approved , Cross – Over Sheeth - Braided – Dcgiapproved , Cross – Over Sheeth - Unbraided – Us Fda/ Ce Approved , Cross – Over Sheeth - Unbraided – Dcgiapproved , Visceral Type Catheter – Us Fda/ Ce Approved , Visceral Type Catheter – Dcgiapproved , Head Hunter Type Catheter – Us Fda/ Ce Approved , Head Hunter Type Catheter – Dcgiapproved , Vtk Type Catheter – Us Fda/ Ce Approved , Vtk Type Catheter – Dcgi Approved , Simmons Type Catheter – Us Fda/ Ce Approved , Simmons Type Catheter – Dcgiapproved , Cobra Type Catheter – Us Fda/ Ce Approved , Abdominal Stent Graft For Treating Aortic Aneurysm– Us Fda Approved , Abdominal Stent Graft For Treating Aortic Aneurysm– Ce Approved , Abdominal Stent Graft For Treating Aortic Aneurysm– Dcgi Approved , Thorosic Stent Graft For Treating Thorasic Aneurysm And Thorosic Dissection – Us Fda Approved , Thorosic Stent Graft For Treating Thorosic Aneurysm And Thorosic Dissection– Ce Approved , Thorosic Stent Graft For Treating Thorosic Aneurysm And Thorosic Dissection– Dcgi Approved , Covered Aortic Stent Balloon Mounted - Us Fda Approved , Covered Aortic Stent Balloon Mounted – Ce Approved , Covered Aortic Stent Balloon Mounted (Andra Stent Type) – Dcgi Approved , Non-Covered Aortic Stent Balloon Mounted - Us Fda Approved , Non-Covered Aortic Stent Balloon Mounted – Ce Approved , Non-Covered Aortic Stent Balloon Mounted(Endra Stent Type)– Dcgi Approved , Asd Occluders, -Percutaneous Transcatheter Closure For Non-Surgical Closure Of Atrial Septal Defect. Device Should Be Self-Expandable Double Disc Made Up Of Soft Nitinol Wire Mesh That Is Shaped Into Two Flat Discs And A Waist Between. Polyester Fabric Sewn Into Each Disc And The Waist To Promote Occlusion And Tissue In Growth. The Matellic Material Should Be Intaglio Treated To Improve Biocompatibilty And Reduce Nickel (Ni) Leaching. Device Should Be Mr Conditional Upto 3Tesla Or Less. Device Should Be Backed By Strong Clinical Study With Proven Success Rate For Pediatrics And Adults. – Usfda Approved Sizes - 4Mm, 5Mm, 6Mm, 7Mm, 8Mm, 9Mm, 10Mm, 11Mm, 12Mm, 13Mm, 14Mm, 15Mm, 16Mm, 17Mm, 18Mm, 19Mm, 20Mm, 22Mm, 24Mm, 26Mm, 28Mm, 30Mm, 32Mm, 34Mm, 36Mm, 38Mm, And,40Mm , Asd - Multi Fenestrated (Cribriform) Occluders, Percutaneous Transcatheter Closure For Non-Surgical Closure Of Atrial Septal Defect. Device Should Be Self-Expandable Double Disc Made Up Of Soft Nitinol Wire Mesh That Is Shaped Into Two Flat Discs And A Very Thin Waist Of 3Mm. Device Should Have Matched Disc Diameters To Maximise The Coverage Of Multiple Fenestrations. Polyester Fabric Sewn Into Each Disc Promote Occlusion And Tissue In Growth. The Matellic Material Should Be Intaglio Treated To Improve Biocompatibilty And Reduce Nickel (Ni) Leaching. Device Should Be Mr Conditional Upto 3Tesla Or Less. Device Should Be Backed By Strong Clinical Study With Proven Success Rate For Pediatrics And Adults. Usfda Approved Sizes - 18Mm, 25Mm, 30Mm, 35Mm, And 40Mm , Pda Occluders, Percutaneous Transcatheter Closure For Non-Surgical Closure Of Patent Ductus Arteriosus. Device Should Be Self- Expandable Made Up Of Soft Nitinol Wire Mesh, Which Has Been Heated And Set To Expand Into T-Shape. Retention Skirt Design Should Provide Secure Positioning With The Ductus And Reduce Embolization. Polyester Fabric Sewn Into The Device To Promote Occlusion And Tissue In Growth. The Matellic Material Should Be Intaglio Treated To Improve Biocompatibilty And Reduce Nickel (Ni) Leaching. Device Should Be Mr Conditional Upto 3Tesla Or Less. Device Should Be Backed By Strong Clinical Study With Proven Success Rate For Pediatrics And Adults.Usfda Approved Sizes - 0405Mm, 0406Mm, 0608Mm, 0810Mm, 1012Mm, 1214Mm, And 1416Mm , Pda Occluder With Double Disc, Percutaneous Transcatheter Closure For Non-Surgical Closure Of Moderate Patent Ductus Arteriosus. Device Should Be Self-Expandable Made Up Of Soft Nitinol Compliant-Multilayered Mesh And Dual Articulating Discs That Provide High Conformability To Treat Maximum Types Of Pda. Device Should Have Symmetric Design That Offers Procedural Flexibility To Choose Antegrade Or Retrograde Approach. Device Should Have Fabric-Free Technology That Allows For Delivery Through Low-Profile Catheter While Maintaining High Rate Of Occlusion. The Matellic Material Should Be Intaglio Treated To Improve Biocompatibilty And Reduce Nickel (Ni) Leaching. Device Should Be Mr Conditional Upto 3Tesla Or Less. Device Should Be Backed By Strong Clinical Study With Proven Success Rate For Pediatrics And Adults. Usfda Approved Sizes - 0304Mm, 0306Mm, 0404Mm, 0406Mm, 0504Mm, 0506Mm, 0604Mm, And 0606Mm , Pda Occluder With Double Disc (For Neonates), Percutaneous Transcatheter Closure For Non-Surgical Closure Of Small Patent Ductus Arteriosus In Neonates While Minimizing Protrusion. Device Should Be Self-Expandable Made Up Of Soft Nitinol Compliant-Multilayered Mesh. Device Should Have Low-Profile Dual Articulating Discs That Provide High Conformability To Treat Maximum Types Of Small Pdas. Device Should Have Symmetric Design That Offers Procedural Flexibility To Choose Antegrade Or Retrograde Approach. Device Must Containt Tightly Woven, Single Layer Mesh Development To Minimize Residual Shunt After Placement. Device Should Be Preloaded On Delivery Cable And Comes With A Special Low-Profile Delivery Catheter Of 4Fr. The Matellic Material Should Be Intaglio Treated To Improve Biocompatibilty And Reduce Nickel (Ni) Leaching. Device Should Be Mr Conditional Upto 3Tesla Or Less. Device Should Be Backed By Strong Clinical Study With Proven Success Rate For Pediatrics And Adults.Usfda Approved Sizes - 0302Mm, 0304Mm, 0306Mm, 0402Mm, 0404Mm, 0406Mm, 0502Mm, 0504Mm, And, 0506Mm , Muscular Vsd Occluder, Is A Percutaenous Transcatheter Closure For Non-Surgical Closure Of A Ventricular Septal Defect. The Occluder Is Designed To Close Complex Muscular Vsds In Patients To Be At High Risk Of Surgical Repair. The Device Should Be Self-Expandable Symmetric Double Disc Made From A Soft Nitinol Mesh. The Device Waist Should Be Self-Centered And Fill The Defect. The Device Should Be Filled With Polyester Material That Promotes Occlusion And Tissue In Growth. The Waist Length Should Be 7Mm To Accomodate The Thickness Of Muscular Ventricular Septal Wall. Symmetric Design Should Allow Both Antegrade And Retrograde Approach. The Matellic Material Should Be Intaglio Treated To Improve Biocompatibilty And Reduce Nickel (Ni) Leaching. Device Should Be Mr Conditional Upto 3Tesla Or Less. Device Should Be Backed By Strong Clinical Study With Proven Success Rate For Pediatrics And Adults.Usfda Approved Sizes - 4Mm, 6Mm, 8Mm, 10Mm, 12Mm, 14Mm, 16Mm, And 18Mm , P.I. Muscular Vsd Occluder, Is A Percutaenous Transcatheter Closure For Non-Surgical Closure Of A Ventricular Septal Defect. The Occluder Is Designed To Close Complex Muscular Vsds In Patients To Be At High Risk Post Infarction Caused Due To Mi. The Device Should Be Self-Expandable Symmetric Double Disc Made From A Soft Nitinol Mesh. The Device Waist Should Be Self-Centered And Fill The Defect. The Device Should Be Filled With Polyester Material That Promotes Occlusion And Tissue In Growth. The Waist Length Should Be 10Mm To Accomodate The Thickness Of Apical Ventricular Septal Wall. Symmetric Design Should Allow Both Antegrade And Retrograde Approach. The Matellic Material Should Be Intaglio Treated To Improve Biocompatibilty And Reduce Nickel (Ni) Leaching. Device Should Be Mr Conditional Upto 3Tesla Or Less. Device Should Be Backed By Strong Clinical Study With Proven Success Rate For Pediatrics And Adults. Usfda Approved Sizes - 16Mm, 18Mm, 20Mm, 22Mm, And 24Mm , Membranous Vsd Occluder, Is A Percutaneous Transcatheter Closure For Non-Surgical Closure Of Peri-Membranous Ventricular Septal Defect. It Should Be Non-Concentric Design Allows For Placement That Avoida Interference With Aortic Or Av Valves. The Device Should Be Made Up Of Soft Nitinol Meshwith Interwoven Polyester To Promote Occlusion And Tissue In-Growth. The Device Should Be Delievered Using A Pusher Catheter From Venous Approach. The Matellic Material Should Be Intaglio Treated To Improve Biocompatibilty And Reduce Nickel (Ni) Leaching. Device Should Be Mr Conditional Upto 3Tesla Or Less. Device Should Be Backed By Strong Clinical Study With Proven Success Rate For Pediatrics And Adults.Usfda Approved Sizes - 4Mm, 5Mm, 6Mm, 7Mm, 8Mm, 9Mm, 10Mm, 11Mm, 12Mm, 13Mm, 14Mm, 15Mm, 16Mm, 17Mm, And 18Mm , Pfo Occluder, Is A Percutaneous Transcatheter Closure For Non-Surgical Closure Of Patent Foramen Ovale. Device Should Be Self- Expandable Double Disc Made Up Of Soft Nitinol Wire Mesh That Is Shaped Into Two Flat Discs And A Very Thin Waist Of 3Mm. Device Should Have Matched Disc Diameters To Maximise The Coverage Of Foramen Ovale. Polyester Fabric Sewn Into Each Disc Promote Occlusion And Tissue In Growth. The Matellic Material Should Be Intaglio Treated To Improve Biocompatibilty And Reduce Nickel (Ni) Leaching. Device Should Be Mr Conditional Upto 3Tesla Or Less. Device Should Be Backed By Strong Clinical Study With Proven Success Rate For Pediatrics And Adults. Usfda Approved Sizes - 18Mm, 25Mm, 30Mm, And 35Mm , Atv, Special Delivery System Designed For Asd And Pfo Cases. This Delivery System Comes With An Ultra-Flexible Tip For Better Positioning Of The Device. Enhanced Delivery Cable Improves The Assessment Of Device Final Position Prior To Cable Release. It Is Designed For No Compromise On Torque Strength, Sheath Diameter And Pushability.Usfda Approved Sizes - 6Fr, 7Fr, 8Fr, 9Fr, 10Fr, 12Fr, And 13Fr , Itv, Special Delivery System With Delivery Cable Angeled At 45°. Used For Asd And Pfo Cases Usfda Approved Sizes - 6Fr, 7Fr, 8Fr, 9Fr, 10Fr, 12Fr, And 13Fr , Itv, Special Delivery System With Delivery Cable Angeled At 180°. Used For Vsd And Pda Cases Usfda Approved Sizes - 5Fr, 6Fr, 7Fr, 8Fr, And 9Fr , Tvlp, Special Delivery System For Pda Occluder With Double Disc Angeled At 90° (Ado Ii) Usfda Approved Sizes - 4Fr And 5Fr , Tvlpc, Special Delivery Catheter For Speical Sizes Of Pda Occluder With Double Disc Angeled At 90° (Piccolo Device) Usfda Approved Sizes - 4Fr , Itvp, Special Delivery System With Pusher Catheter Angeled At 180°Usfdaapproved Sizes - 7Fr, 8Fr And 9Fr , Laa Closure, Is A Percutaneous Transcatheter Closure For Non-Surgical Closure Of Left Atrial Appendage. Having An Innovative Design Of Cylindrical Plug Attached With The Retention Skirt. Cylindrical Plug Shaped Head Is Designed To Trap Trabeculations. Device Should Be Preloaded On The Delivery Cable With Delivery Profile Of 12Fr To 14Fr. Devide Should Be Made Up Of Soft Woven Nitinol Mesh. The Matellic Material Should Be Intaglio Treated To Improve Biocompatibilty And Reduce Nickel (Ni) Leaching. Device Should Be Mr Conditional Upto 3Tesla Or Less. Device Should Be Backed By Strong Clinical Study With Proven Success Rate For Pediatrics And Adults. Usfda Approvedsizes - 16Mm, 18Mm, 20Mm, 22Mm, 25Mm, 28Mm, 31Mm, And, 34Mm , Tv, Special Delivery System With Dual Angeled Sheath At 45° X 45° With The Usable Length Of 80Cm Specially Designed For Laa Occludersusfda Approvedsize - 12Fr. And 14Fr. , Sizing Balloon With A Triple Lumen Balloon Catheter With Three Radiopaque Marker Bands Located Inside The Balloon To Allow For Radiographic Measurement. The Centre Of The Balloon Should Contains A Pair Of Marker Bands 0.4Mm Apart For Corrent Balloon Alignment While Measuing The Defect And One Marker Band 15Mm Proximal Of The Pair.Usfda Approvedsize - 18Mm, 24Mm. And 34Mm , Pvl Occluder Is A Percutaneour Transcatheter Closure Of Para Valvular Leak Which Is A Serious Complication Of Valve Replacement Surgery. Devide Should Be Made Up Of Soft Woven Muti-Layered Nitinol Mesh Designed To Increase Density And Provide Rapid Occlusion. Low Profile 4Fr To 7Fr Sheath To Facilitate Defect Crossing. Oblonged Shape To Improve Wall Apposition And Enhance Stability In Pvl. Device Orientation Should Be Defined Through A Small Platinum Marker On The Distal Rim. The Matellic Material Should Be Intaglio Treated To Improve Biocompatibilty And Reduce Nickel (Ni) Leaching. Device Should Be Mr Conditional Upto 3Tesla Or Less. Device Should Be Backed By Strong Clinical Study With Proven Success Rate For Pediatrics And Adults.Usfda Approved Size - 0204Mm, 0306Mm, 0408Mm, 0310Mm, 0510Mm, 0312Mm, 0512Mm, 0314Mm, And 0514Mm. , Pda Closure Devices Without Delivery System — Ce/Dcgi Approved Available In All The Sizes • Hat-Shaped Designed Pda Occluder Device • Platinum Coating Of =25 ? Using Nano Fusion Technology • Polypropylene Fabric Sewn Inside The Occluder Device • Extended Retention Portion Provides Proper Positioning Of The Device In The Ductus Arteriosus • Available Sizes- 4/6, 6/8, 8/10, 10/12, 12/14, 14/16, 16/18, 18/20Mm , Delivery Sheath For Pda Closure Device — Ce /Dcgi Approved , Pda Closure Devices With Delivery System – Ce Approved/ Dgci Approved ·Available In All The Sizes• Hat-Shaped Designed Pda Occluder Device • Platinum Coating Of =25 ? Using Nano Fusion Technology • Polypropylene Fabric Sewn Inside The Occluder Device • Extended Retention Portion Provides Proper Positioning Of The Device In The Ductus Arteriosus • Available Sizes- 4/6, 6/8, 8/10, 10/12, 12/14, 14/16, 16/18, 18/20Mm , Vsd Closure Devices Without Delivery System — Ce/Dcgi Approved• Self-Expanding, Self-Centering Double-Disc Device • Platinum Coating Of =25 ? Using Nano Fusion Technology • Polypropylene Fabric Sewn Inside The Occluder Device • Available Sizes- 4-4, 4-10, 6-4, 6-10, 8-4, 8-10, 10-4, 10-10, 12-4, 12-10Mm • Certificates- Ce & Dcgi Approved • Shelf Life- 3 Years , Delivery Sheath For Vsd Closure Device — Ce Approved , Vsd Closure Devices With Delivery System — Ce/Dcgi Approved• Self-Expanding, Self-Centering Double-Disc Device • Platinum Coating Of =25 ? Using Nano Fusion Technology • Polypropylene Fabric Sewn Inside The Occluder Device • Available Sizes- 4-4, 4-10, 6-4, 6-10, 8-4, 8-10, 10-4, 10-10, 12-4, 12-10Mm • Delivery Cable Available Along With Cable Sheath In Individual Packaging • Soft And Flexible Distal End Of Delivery Cable To Navigate In Various Anatomies • Availability Of ‘S-Shaped’ Sheath • Certificates- Ce & Dcgi Approved • Shelf Life- 3 Years , Valve • Self-Expanding Frame, Supra-Annular Valve Design, Bovine Pericardial Valve • Proprietary Anti-Calcification Tissue Treatment • Extended Internal Sealing Skirt • Two Rows Of Radio-Opaque Markers On The Frame • Varying Radial Force Frame – Optimal Forces At All 3 Parts Of The Frame • Available In Three Sizes Of 22, 26, And 30 Mm, Which Cover The Treatable Annular Diameter Range From 17 To 27 Mm • Post Dilatation Limits Of Valve Frame Equal To Approved Annulus Diameter Limit • Cell Size Of = 15 French • Less Metal At The Inflow Section • Certificates- Ce & Dcgi Approved , Pfo Closure Devices With Delivery System — Ce/Dcgi Approved• Self-Expanding, Self-Centering Double-Disc Occluder • Platinum Coating Of =25 ? Using Nano Fusion Technology • Polypropylene Fabric Sewn Inside The Occluder Device • Available In 6 Sizes, 5 Sizes (18/18, 25/18, 25/25, 30/25, 30/30 Mm) Which Are 8F Compatible And 1 Size (35/25 Mm) Which Is 9F Compatible • 6F Delivery Cable Available In Individual Packaging • Certificates- Ce & Dcgi Approved • Shelf Life- 3 Years , Pfo Closure Devices Without Delivery System — Ce/Dcgi Approved• Self-Expanding, Self-Centering Double-Disc Occluder • Platinum Coating Of =25 ? Using Nano Fusion Technology • Polypropylene Fabric Sewn Inside The Occluder Device • Available In 6 Sizes, 5 Sizes (18/18, 25/18, 25/25, 30/25, 30/30 Mm) Which Are 8F Compatible And 1 Size (35/25 Mm) Which Is 9F Compatible • Certificates- Ce & Dcgi Approved • Shelf Life- 3 Years , Delivery Sheath For Pfo Closure Device — Ce/Dcgi Approved •Compatible With The Device Approved , Asd Closure Devices Without Delivery System– Ce Approved/Dcgi Approved ·Approved For Pediatric/Adult Use • Self-Expanding, Self-Centering Double-Disc Device • Platinum Coating Of =25 ? Using Nano Fusion Technology • Polypropylene Fabric Sewn Inside The Occluder Device • Available In Sizes- 8, 10, 12, 14, 16, 18, 20, 22, 24, 26, 28, 30, 32, 34, 36, 38 & 40Mm , Asd Closure Devices With Delivery System – Ce Approved/Dcgi Approved ·Approved For Pediatric/Adult Use ·Self-Centering, Detachable Device With Delivery Cable • Self-Expanding, Self-Centering Double-Disc Device • Platinum Coating Of =25 ? Using Nano Fusion Technology • Polypropylene Fabric Sewn Inside The Occluder Device • Available In Sizes- 8, 10, 12, 14, 16, 18, 20, 22, 24, 26, 28, 30, 32, 34, 36, 38 & 40Mm And Delivery Sheath , Delivery Sheath For Asd Closure Device - Ce/Dcgi Approved , Delivery Cable For Asd/Vsd/Pda/Pfo Devices - Ce/Dcgi Approved , Left Atrial Appendage Closure Device Us Fda Approved , Occlusion Balloon-Dcgi With Us Fda / Ce Approved ?Shouldbe Soft Compliant Balloon Material With Radio-Opaque Markers At Both Distal And Proximal End Of Balloon ?Should Be 14Fr / 16Fr Sheath And 0.035”/0.038” Wire Compatible. Should Be Available In Diameter 20 Mm/ 27 Mm / 33 Mm And 40 Mm. , Pda Coils Made Of Steel/ Nitinol/Platinum - Us Fda Approved ? 0.035, 0.038 Inches Sizes Ranging From 2 X 2 To 15 X 15 , Pda Coils Made Of Steel/ Nitinol/Platinum - Ce Approved ? 0.035, 0.038 Inches Sizes Ranging From 2 X 2 To 15 X 15 , Pda Coils Made Of Steel/ Nitinol/Platinum – Dcgi Approved ? 0.035, 0.038 Inches Sizes Ranging From 2 X 2 To 15 X 15 , 0.052 Inch Pda Coils Made Of Steel/ Nitinol/Platinum - Us Fda Approved Sizes Ranging From 2 X 2 To 15 X 15 , 0.052 Inch Pda Coils Made Of Steel/ Nitinol/Platinum - Ce Approved Sizes Ranging From 2 X 2 To 15 X 15 , 0.052 Inch Pda Coils Made Of Steel/ Nitinol/Platinum – Dcgi Approved Sizes Ranging From 2 X 2 To 15 X 15 , Embolisation Coils (0.018 Inch) - Us Fda Approved Sizes Ranging From 2 X 2 To 15 X 15 , Embolisation Coils (0.018 Inch) - Ce Approved Sizes Ranging From 2 X 2 To 15 X 15 , Embolisation Coils (0.018 Inch) – Dcgi Approved Sizes Ranging From 2 X 2 To 15 X 15 , Embolisation Coils (0.035 Inch) - Us Fda Approved Sizes Ranging From 2 X 2 To 15 X 15 , Embolisation Coils (0.035 Inch) - Ce Approved Sizes Ranging From 2 X 2 To 15 X 15 , Embolisation Coils (0.035 Inch) – Dcgi Approved Sizes Ranging From 2 X 2 To 15 X 15 , Embolisation Coils (0.052 Inch) - Us Fda Approved Sizes Ranging From 2 X 2 To 15 X 15 , Embolisation Coils (0.052 Inch) - Ce Approved Sizes Ranging From 2 X 2 To 15 X 15 , Embolisation Coils (0.052 Inch) –Dcgi Approved Sizes Ranging From 2 X 2 To 15 X 15 , Park Blade Septectomy Catheter - Us Fda Approved , Park Blade Septectomy Catheter - Ce Approved , Park Blade Septectomy Catheter – Dcgi Approved , Embolisation Coils - Us Fda Approved ?Should Be 0.014/0.018” Compatible ?Should Be Made Of Platinum With Synthetic Fibres ?Should Be Non Tapering/Straight ?Should Be Mr Compatible ?Should Be Available In Any Or The Following Diameters: 2-10 Mm Should Be Of Various Lengths; The Length Of The Coil At Each Diameter Should Be Stated , Embolisation Coils - Ce Approved ?Should Be 0.014/0.018” Compatible ?Should Be Made Of Platinum With Synthetic Fibres ?Should Be Non Tapering/Straight ?Should Be Mr Compatible ?Should Be Available In Any Or The Following Diameters: 2-10 Mm Should Be Of Various Lengths; The Length Of The Coil At Each Diameter Should Be Stated , Embolisation Coils – Dcgi Approved ?Should Be 0.014/0.018” Compatible ?Should Be Made Of Platinum With Synthetic Fibres ?Should Be Non Tapering/Straight ?Should Be Mr Compatible ?Should Be Available In Any Or The Following Diameters: 2-10 Mm Should Be Of Various Lengths; The Length Of The Coil At Each Diameter Should Be Stated , Embolisation Coils - Usfda Approved ?Should Be 0.035/0.038” Compatible ?Should Be Made Of Platinum With Synthetic Fibres ?Should Be Mr Compatible ?Should Be Tapering From A Larger To A Smaller End ?Should Be Available In Following Sizes: Diameters: 5-10 Mm And Length 2-15 Cm The Diameter To Tapered End For Tapering Type Coil Should Be Mentioned , Embolisation Coils - Ce Approved ?Should Be 0.035/0.038” Compatible ?Should Be Made Of Platinum With Synthetic Fibres ?Should Be Mr Compatible ?Should Be Tapering From A Larger To A Smaller End ?Should Be Available In Following Sizes: Diameters: 5-10 Mm And Length 2-15 Cm The Diameter To Tapered End For Tapering Type Coil Should Be Mentioned , Embolisation Coils – Dcgi Approved ?Should Be 0.035/0.038” Compatible ?Should Be Made Of Platinum With Synthetic Fibres ?Should Be Mr Compatible ?Should Be Tapering From A Larger To A Smaller End ?Should Be Available In Following Sizes: Diameters: 5-10 Mm And Length 2-15 Cm The Diameter To Tapered End For Tapering Type Coil Should Be Mentioned , Embolisation Coils - Us Fda Approved ? Should Be 0.035/0.038/0.052” Compatible ? Should Be Non Tapering/Straight ? Should Be Made Of Stainless Steel With Synthetic Fibres Should Be Available In The Following Sizes: Diameters: 3-15 Mm And Length 2-15 Cm , Embolisation Coils - Ce Approved ? Should Be 0.035/0.038/0.052” Compatible ? Should Be Non Tapering/Straight ? Should Be Made Of Stainless Steel With Synthetic Fibres Should Be Available In The Following Sizes: Diameters: 3-15 Mm And Length 2-15 Cm , Embolisation Coils – Dcgi Approved ? Should Be 0.035/0.038/0.052” Compatible ? Should Be Non Tapering/Straight ? Should Be Made Of Stainless Steel With Synthetic Fibres Should Be Available In The Following Sizes: Diameters: 3-15 Mm And Length 2-15 Cm , Coil Pusher Wire For 0.014/0.018” Coils, Compatible With The Quoted Micro Catheters - Us Fda Approved , Coil Pusher Wire For 0.014/0.018” Coils, Compatible With The Quoted Micro Catheters - Ce Approved , Coil Pusher Wire For 0.014/0.018” Coils, Compatible With The Quoted Microcatheters – Dcgi Approved , Gelfoam Sheet For Vascular Embollization - Us Fda Approved , Gelfoam Sheet For Vascular Embollization - Ce Approved , Gelfoam Sheet For Vascular Embollization – Dcgi Approved , Liquid Embolization System Available In Various Sizes (2Ml, 3Ml & 6Ml)– Us Fda/ Ce / Dcgi Approved , Pbmv Balloon (All Types And Sizes) With Accessories – Us Fda Approved , Pbmv Balloon (All Types And Sizes) With Accessories – Ce Approved , Pbmv Balloon (All Types And Sizes) With Accessories – Dcgi Approved , Pbmv Balloon (All Types And Sizes) Without Accessories – Us Fda Approved , Pbmv Balloon (All Types And Sizes) Without Accessories –Ce Approved , Pbmv Balloon (All Types And Sizes) Without Accessories –Dcgi Approved , Accessories Only For The Above Pbmv Balloons – Us Fda Approved , Accessories Only For The Above Pbmv Balloons – Ce Approved , Accessories Only For The Above Pbmv Balloons – Dcgi Approved , Pbmv Balloon With Side Safety / Microholes With Accessories– Us Fda Approved , Pbmv Balloon With Side Safety / Microholes With Accessories– Ce Approved , Pbmv Balloon With Side Safety / Microholes With Accessories– Dcgiapproved , Pbmv Balloon With Side Safety / Microholes Without Accessories – Us Fda Approved , Pbmv Balloon With Side Safety/ Microholes Without Accessories– Ce Approved , Pbmv Balloon With Side Safety/ Microholes Without Accessories– Dcgiapproved , Ptmc Balloon With Hole In Balloon – Us Fda Approved , Ptmc Balloon With Hole In Balloon – Ce Approved , Ptmc Balloon With Hole In Balloon – Dcgi Approved , Ptmc Balloon (With Hole In Balloon) With All Acessories- Us Fda Approved , Ptmc Balloon (With Hole In Balloon) With All Acessories- Ce Approved , Ptmc Balloon (With Hole In Balloon) With All Acessories- Dcgi Approved , Tavi (|Trans Catheter Aortic Valve Replacement System With All Required Accessories) - – Dcgi With Us Fda /Ce Approved , Tavi (|Trans Catheter Aortic Valve Replacement System With All Required Accessories)- Ce Approved , Tavi (|Trans Catheter Aortic Valve Replacement System With All Required Accessories) – Dcgi Approved , Self Expandable Trans Catheter Aortic Valve Replacement System With All Required Accessories –Us Fda /Ce Approved ?Should Be Inall Sizes Diameter Anti – Calcification And Chemical Dehydration Thin & Strong Low Profile With Delivery System. , Self Expandable Trans Catheter Aortic Valve Replacement System With All Required Accessories – Dcgi Approved ?Should Be Inall Sizes Diameter Anti – Calcification And Chemical Dehydration Thin & Strong Low Profile With Delivery System. , Self Expandable Trans Catheter Tricuspidvalve Replacement System With All Required Accessories – Dcgi With Us Fda /Ce Approved ?Should Be Inall Sizes Diameter Anti – Calcification And Chemical Dehydration Thin & Strong Low Profile With Delivery System. , Trans Catheter Tricuspid Valve Replacement System With All Required Accessories – Dcgi With Us Fda /Ce Approved ?Should Be Inall Sizes Diameter Anti – Calcification And Chemical Dehydration Thin & Strong Low Profile With Delivery System. , Mitra-Clip (Trans Catheter Mitral Valve Clip System) - Dcgi With Us Fda / Ce Approved , Mitra-Valve (Trans Catheter Mitral Valve) - Dcgi , Tavi (|Trans Catheter Aortic Valve Replacement System With All Required Accessories)- Usfda Approved , Tavi (|Trans Catheter Aortic Valve Replacement System With All Required Accessories)- Ce Approved , Tavi (|Trans Catheter Aortic Valve Replacement System With All Required Accessories)- Dcgi Approved , Tavi Guide-Wire -Dcgi With Us Fda / Ce Approved ?Should Be Available In Diameter 0.035, Length 250-275 Cm, Should Have Spring Coil Ptfe Coating And Extra Small, Small & Large Curves. , Wire 0.018” Regular Length, Regular Shaft Stiffness - Us Fda Approved Floppy Tip, Straight / J Shaped Tip, 140-300Cm Long , Wire 0.018” Regular Length, Regular Shaft Stiffness - Ce Approved Floppy Tip, Straight / J Shaped Tip, 140-300Cm Long , Wire 0.018” Regular Length, Regular Shaft Stiffness – Dcgi Approved Floppy Tip, Straight / J Shaped Tip, 140-300Cm Long , Wire 0.018” Regular Length, Extra – Stiff Shaft - Us Fda Approved Floppy Tip, Straight / J Shaped Tip, 140-300Cm Long , Wire 0.018” Regular Length, Extra – Stiff Shaft- Ce Approved Floppy Tip, Straight / J Shaped Tip, 140-300Cm Long , Wire 0.018” Regular Length, Extra – Stiff Shaft- Dcgi Approved Floppy Tip, Straight / J Shaped Tip, 140-300Cm Long , Valvoplasty Balloon Catheters - Us Fda Approved ?Varying Sizes And Diameters Approved For Pediatric/Adults Use , Valvoplasty Balloon Catheters - Ce Approved ?Varying Sizes And Diameters Approved For Pediatric/Adults Use , Valvoplasty Balloon Catheters – Dcgi Approved ?Varying Sizes And Diameters Approved For Pediatric/Adults Use , Special Balloon Catheter Compatible With 4 French Sheath - Us Fda Approved ?Compatible With 0.018 Inch Guide Wire Varying Length And Diamete , Special Balloon Catheter Compatible With 4 French Sheath - Ce Approved ?Compatible With 0.018 Inch Guide Wire Varying Length And Diameter , Special Balloon Catheter Compatible With 4 French Sheath – Dcgi Approved ?Compatible With 0.018 Inch Guide Wire Varying Length And Diameter , Special Pediatric Valvoplasty Balloon Catheters Compatible With 4 French Sheath - Us Fda Approved ?Compatible With 0.025 Inch Guide Wire Varying Length And Diameter , Special Pediatric Valvoplasty Balloon Catheters Compatible With 4 French Sheath - Ce Approved ?Compatible With 0.025 Inch Guide Wire Varying Length And Diameter , Special Pediatric Valvoplasty Balloon Catheters Compatible With 4 French Sheath – Dcgi Approved ?Compatible With 0.025 Inch Guide Wire Varying Length And Diameter , Valvoplasty Balloon Catheters (Sizes 10 – 22 Mm)- Us Fda Approved ?Approved For Pediatric/Adults Use ?Varying Length And Diameter Nominal Pressure < 4 Atm , Valvoplasty Balloon Catheters (Sizes 10 – 22 Mm)- Ce Approved ?Approved For Pediatric/Adults Use ?Varying Length And Diameter Nominal Pressure < 4 Atm , Valvoplasty Balloon Catheters (Sizes 10 – 22 Mm)- Dcgi Approved ?Approved For Pediatric/Adults Use ?Varying Length And Diameter Nominal Pressure < 4 Atm , Balloon Catheters (Sizes 10 – 22 Mm)- Us Fda Approved ?Approved For Pediatric/Adults Use ?Varying Length And Diameter Nominal Pressure < 8 Atm , Balloon Catheters (Sizes 10 – 22 Mm)- Ce Approved ?Approved For Pediatric/Adults Use ?Varying Length And Diameter Nominal Pressure < 8 Atm , Balloon Catheters (Sizes 10 – 22 Mm)- Dcgiapproved ?Approved For Pediatric/Adults Use ?Varying Length And Diameter Nominal Pressure < 8 Atm , Balloon In Balloon Catheters- Us Fda Approved Quote In All Sizes , Balloon In Balloon Catheters- Ce Approved Quote In All Sizes , Balloon In Balloon Catheters- Dcgiapproved Quote In All Sizes , Fogarty Embolectomy Catheter - Us Fda Approved ?4Fr./5Fr./6 Fr. Sizes Metal Rod At Tip Of The Catheter To Enable Angulations Up To 60 Degrees , Fogarty Embolectomy Catheter - Ce Approved ?4Fr./5Fr./6 Fr. Sizes Metal Rod At Tip Of The Catheter To Enable Angulations Up To 60 Degrees , Fogarty Embolectomy Catheter - Dcgi Approved ?4Fr./5Fr./6 Fr. Sizes Metal Rod At Tip Of The Catheter To Enable Angulations Up To 60 Degrees , Atrial Septostomy Catheter - Us Fda Approved 4Fr./5Fr./6 Fr. Sizes , Atrial Septostomy Catheter - Ce Approved 4Fr./5Fr./6 Fr. Sizes , Atrial Septostomy Catheter – Dcgi Approved 4Fr./5Fr./6 Fr. Sizes , Detachable Balloon - Us Fda Approved , Detachable Balloon - Ce Approved , Detachable Balloon – Dcgi Approved , Vascular Plugs – Us Fda Approved , Vascular Plugs – Ce Approved , Vascular Plugs Implantation– Dcgi With Us Fda / Ce Approved ?Should Be Titanium Nitride Coated. ?Should Have Ptfe Layers For Enhanced Occlusion. Should Be Available In Various Sizes (4.0- 24.0 Mm. , Valvoplasty Balloon Catheters Tyshek Type (All Sizes) - Us Fda Approved ?Approved For Pediatric/Adults Use ?Varying Length And Diameter Nominal Pressure < 4 Atm , Valvoplasty Balloon Catheters Tyshek Type (All Sizes)- Ce Approved ?Approved For Pediatric/Adults Use ?Varying Length And Diameter Nominal Pressure < 4 Atm , Aortic Stent Graft Abdominal -Dcgi With Us Fda / Ce Approved ?Endovascular Stent Graft Device For The Treatment Of Thoracic Aortic Aneurysm Or Dissection With Ptfe Dual Membrane Coating. With Metal Spine On The Greater Curvature To Avoid Stent Shortening And Provide Axial Support. , A U I Stent Graft Systemdcgi With Us Fda / Ce Approved ?Specifically Designed For Treatment Of Endovascular Abdominal Aortic Aneurysm A Self – Expandable Nitinol Stent With Ptfe Dual Membrane Coating & Offers Axial Support Preventing Foreshortening Of Stent. , Iliac Stent Graft -Dcgi With Us Fda / Ce Approved ?Endo-Vascular Stent Graft Device For The Treatment Iliac Aneurysm Or Dissection. With Proximal Bare Spring Configuration. It Should Be An Extension To Aaa Graft System , Multifunctional Occluder-Dcgi With Us Fda / Ce Approved ?For Occlusion Of Muscular Vsd Peri-Membranous Vsd, Rsov, Apex Window & Av Fistula Should Be Low Profile (4F-6F) And Should Come With A Elongatable Waist. , Peripheral Snare With Tungsten Loop Coated With Titanium Nitride - Dcgi With Ce/ Us Fda Approved Loop Size 5Mm To 35Mm. Shaft Size Up To 6F , Peripheral Snare With Tungsten Loop Coated With Titanium Nitride (5Mm To 35Mm) -Dcgi With Us Fda / Ce Approved , Ivc Filter For Optimal Filtration Of Ivc Up To 23Mm -Dcgi With Us Fda / Ce Approved ?Made Of National And Filter Length Up To 40 ?For Temporary Placement It Should Be Administrable From Jugular/ Femoral Route , Coronary Snare With Tungsten Loop Coated With Titanium Nitride (4Mm&7Mm) -Dcgi With Us Fda / Ce Approved , Steerable Sheath With Deflectable Tip (190-160Degree) -Dcgi With Us Fda / Ce Approved , Pva Particles With Consistent Sized Particles - Dcgi With Us Fda/ Ce Approved , Endomyocardial Biopsy (Emb) Forceps Set - Us Fda Approved Set Should Include ?Should Include An Endomyo-Cardial Biopsy Foreeps And Compatible Pre-Shaped Introducer Sheath With Side Arm And Its Dilator , Endomyocardial Biopsy (Emb) Forceps Set – Ce/Dcgi Approved Set Should Include ?Should Include An Endomyo-Cardial Biopsy Foreeps And Compatible Pre-Shaped Introducer Sheath With Side Arm And Its Dilator ?Variable Lengths And Sizes Should Be Available For Both For Jugular And Femoral Access , Intravascular Retriever – Snare (‘Amplatz Gooseneck’ Type) - Us Fda Approved Snare Kit Should Include ?A Snare And Its Compatible Sheath ?Should Have Nitinol Shaft ?Should Have 90 Degree Preformed Snare Loop Variable Sizes Of Loop (5-35 Mm) , Intravascular Retriever – Snare (‘Amplatz Gooseneck’ Type) - Ce Approved Snare Kit Should Include ?A Snare And Its Compatible Sheath ?Should Have Nitinol Shaft ?Should Have 90 Degree Preformed Snare Loop Variable Sizes Of Loop (5-35 Mm) , Intravascular Retriever – Snare (‘Amplatz Gooseneck’ Type) –Dcgiapproved Snare Kit Should Include ?A Snare And Its Compatible Sheath ?Should Have Nitinol Shaft ?Should Have 90 Degree Preformed Snare Loop Variable Sizes Of Loop (5-35 Mm) , Sheaths For Intravascular Snares - Us Fda Approved Should Be Compatible With Item No. 3 &4 , Sheaths For Intravascular Snares - Ce Approved Should Be Compatible With Item No. 3 & 4 , Sheaths For Intravascular Snares – Dcgi Approved Should Be Compatible With Item No. 3 & 4 , Intravascular Retriever – Microsnare (‘ Amplatz Gooseneck’ Type) - Us Fda Approved Microsnare Kit Should Include ?A Microsnare, Compatible Micro – Catheter, Micro – Catheter Introducer And A Torque Device ?Should Have Nitinol Shaft ?Should Have 90 Degree Preformed Snare Loop Variable Sizes (2-7 Mm) , Intravascular Retriever – Microsnare (‘ Amplatz Gooseneck’ Type) - Ce Approved Microsnare Kit Should Include ?A Microsnare, Compatible Micro – Catheter, Micro – Catheter Introducer And A Torque Device ?Should Have Nitinol Shaft ?Should Have 90 Degree Preformed Snare Loop Variable Sizes (2-7 Mm) , Intravascular Retriever – Microsnare (‘ Amplatz Gooseneck’ Type) – Dcgiapproved Microsnare Kit Should Include ?A Microsnare, Compatible Micro – Catheter, Micro – Catheter Introducer And A Torque Device ?Should Have Nitinol Shaft ?Should Have 90 Degree Preformed Snare Loop Variable Sizes (2-7 Mm) , Accessories For Intravascular Microsnare - Us Fda Approved Should Be Compatible With Item No. 7 & 8 , Accessories For Intravascular Microsnare - Ce Approved Should Be Compatible With Item No. 7 & 8 , Accessories For Intravascular Microsnare – Dcgiapproved Should Be Compatible With Item No. 7 & 8 , Intravascular Retriever – Basket - Us Fda Approved Set Should Include ?Basket Retriever And Its Catheter Should Be Available In All Sizes , Intravascular Retriever – Basket - Ce Approved Set Should Include ?Basket Retriever And Its Catheter Should Be Available In All Sizes , Intravascular Retriever – Basket – Dcgi Approved Set Should Include ?Basket Retriever And Its Catheter Should Be Available In All Sizes , Intravascular Retriever Snare Kit Goose Neck Type – Dcgi & Us Fda / Ce Approved , Sizing Balloon For Device Closure — Circular Shape - Ce Approved , Sizing Balloon For Device Closure - Round Shape - Dcgi /Ce Approved , Cobalt Cliromium Renal Stents, Premounted On Balloon Dcgi Approved · Monorail (Rapid Exchange) And Over-The-Wire (Otw) · Available In The Sizes And Lengthsthree Mid-Strut To Mid-Strut Connectors Between Two Rings. • Two Different Crown Design For Diameters Between 5- 7 Mm. • Crossing Profile = 1.50 Mm • Zero Foreshortening • Available In 5,6 And 7Mm Diameters With Length Of 12,15 And 18 Mm. , Permanent Venacava Filter– Ce Approved , Permanent Venacava Filter– Us Fda Approved , Permanent Venacava Filter– Dcgi Approved , Temporary Venacava Filter– Ce Approved , Temporary Venacava Filter– Us Fda Approved , Temporary Venacava Filter– Dcgi Approved , 1 Port Cath-Lock™ Introducer Sheath With Hemostasis Valve And Sideport, Dilator,And 50 Cm Double Distal Guidewire With “J” And Straight Ends , 2 Port Hemostasis Adapter With Sideports And Cath-Lock™ Sealing Mechanism, Venous Sheath,Dilator And 50 Cm Double Distal Guidewire With “J” And Straight Ends , 3 Port Hemostasis Adapter With Sideports And Cath-Lock™ Sealing Mechanism, Venous Sheath,Dilator And 50 Cm Double Distal Guidewire With “J” And Straight Ends , Introducer Sheath With Hemostasis Valve And Sideport, And Dilator , Mullins Style Curve 6/7/8 F Size, 61Cm Usable Length , 67Cm Dilator Usable Length , Swartz Lntroducer Braided Sheath With Hemostatic Valve Sl0/Sl1/Sl2/Sl3 (8F, 63 Cm Usable Length And 67Cm Dilator Usable Length) Accomodates Maximum 0.32 Guidewire , Swartz Lntroducer Non Braided Sheath With Hemostatic Valve Sr0/Sr1/Sr2/Sr3 (8F, 63 Cm),(8F, 63 Cm Usable Length) Accomodates Maximum 0.38 Guidewire , 8.5 F : 71 Cm Bi-Directional (Assymetrical ) Deflectable Sheath , Curl Dimension 16.8Mm And 22.4 Mm With Integrated Hemostasis Valve And Radiopaque Tip Marker And Various Curve Options , Compatible With 98 Cm Transseptal Needle Along With 180 Cm Super Stiff Guidewire , 8.5 F : 40 Cm Bi-Directional (Assymetrical ) Deflectablesheath Used For Epicardialwith Integrated Hemostasis Valve And Radiopaque Tip Marker And Various Curve Options , Brk/Brk-1Needle-Adult, 18 Gauge, Usable Length 71 Cm. , Brk/Brk-1 Needle-Adult, 18 Gauge, Usable Length 98 Cm. , Fixed Curve Quadripolar Electrophysiology Catheter (6F/5F/4F, 1Mm Band Electrode) Crd/Jsn/Dao, 2-5-2 Mm Electrode Spacing , Fixed Curve Quadripolar Electrophysiology Catheter (6F) Crd-2, 5Mmelectrode Spacing , Fixed Cuve (Csl) Decapolar Catheter (6F) -65 Cm Usable Length With 5-5-5 Spacing With Tip Electrode 2Mm , Fixed Cuve (Csl) Decapolar Catheter (6F) -120 Cm Usable Length With 5-5-5 Spacing With Tip Electrode 2Mm , Deflectable Decapolar Electrophysiology Catheter With Connector (6F)-110Cm Usable Length With 2-5-2 Spacing , Deflectable Decapolar Electrophysiology Catheter With Connector (5F)-110Cm Usable Length With 2-5-2 Spacing , Deflectable Decapolar Electrophysiology Catheter With Connector (4F)-110Cm Usable Length With 2-5-2 Spacing , Duodecapolar Electrophysiology Catheter-20 Poles (7F) Usable Length 95Cm With 5-5-5 Spacing, 1Mm Band Electrode , 8F Sensor Enabled Uni-Directional Circular Mapping Catheter With 3-3-3Mm & 5-5-5Mm Electrode Specification, 2Mm Tip & 1 Mm Band Electrode With Fixed Loop , 8F Sensor Enabled Bi-Directionalcircular Mapping Catheter Df Curve 3-3-3Mm- & 5-5-5Mm Specification, 2Mm Tip & 1 Mm Band Electrode With Fixed Loop , 8F Sensor Enabled Uni-Directional Circular Mapping Catheter With 6.5Mm Electrode Spacing Variable Loop With 15-25 Mm Range , 8F Sensor Enabled Bi-Directional Circular Mapping Catheter With 1-4-1 Mm Electrode Spacing Variable Loop With 15-25 Mm Range , 8F-Irrigated Bidirectional 16 Electrode ,2F Splines, 3 Mm Spacing , 1Mm Electrode Size,High Density Sensor Enable Mapping Cathter Comaptible With Ensite Mapping System , Bi-D-Deflectable Radio Frequency Ablation Catheter (7 F, 4Mm Tip ) 2-5-2 Electrode Spacing - With Universal Temperature Sensor (Thermocouple And Thermistor Temperature Monitoring Capability),Should Be Compatable To Use With Ibi T11 & Ampere Rf , Uni-D-Deflectable Radio Frequency Ablation Catheter (7 F, 4Mm Tip ) 2-5-2 Electrode Spacing, Usable Length 110Cm ,Should Be Compatable To Use With Ibi T11 & Ampere Rf , Uni-D-Deflectable Radio Frequency Ablation Catheter (5 F, 4Mm Tip ) 2-5-2 Electrode Spacing ,Should Be Compatable To Use With Ibi T11 & Ampere Rf , Irrigated Bi- Directional Ablation Catheter With Flexible Tip1-4-1, Symmetric And Asymmetric Option , Should Be Compatable To Use With Ibi T11 & Ampere Rf Generator , Irrigated Uni- Directional Ablation Catheter With Flexible Tip1-4-1, D And F Curve , Should Be Compatable To Use With Ibi T11 & Ampere Rf Generator , Contact Force Sensor Enable Catheter With Fiber Optic Technology For Force Detection 3.5 Mm Tip Electrode 8F , Six Saline Irrigation Hole, 2-2-2 Ring Spacing,Should Be Compatable To Use With Ibi T11 & Ampere Rf , Intracardiac Echo Catheter-9F Size ,Transducer Type 64 Element Phased Array , Viewing Sector 80 Degrees, Tip Deflection Anterior/Posterior, Left/Right +/- 120 Degree Flexion Compatible With Philips Cx50 Echo System , Magnetic & Impedance (Hybrid) Based Patches For Electroanotomical Mapping For Use With Ensite 3D Mapping System. , Magnetic Based Patches For Electroanotomical Mapping For Use With Ensite 3D Mapping System. , Cool Point Tubing Set For Irrigated Rf Catheter With Dedicated Pressure Sensor And Compatible With Abbott Coolpoint Pump , Cables For Fixed Quadripolar Electrophysiology Catheters , Cables For Fixed Decapolar Electrophysiology Catheters , Cables For Deflectable Decapolar Electrophysiology Catheters , Cables For Highdensity Mappingelectrophysiology Catheters Compatible With Ensite Mapping System , Cables For Ablation Range Ofelectrophysiology Catheters Compatible Compatable To Use With Ibi T11 & Ampere Rf , Cable For Fixed Loop Circular Mapping Catheters , Cable For Variable Loop Circular Mapping Catheters , Us Fda/Ce Approved Permanent Pacemakers With All Leads And Accessories ·Vvir ·All Single Chamber Modes And Basic Pacing Programmable Parameters ·Must Have Ventricular Capture Management ·The Size Of Lead Must Be 7F Or Less ·The Lead Must Be Steroid Eluting And Should Be Both Bipolar And Unipolar Configuration ·Must Have Both Active And Passive Fixation Endocardial Leads Available ··Direct Presence Of Parent Companyin India (Not Only Through The Distributors ) And Company Must Provide Its Trained Technical Person For Each Implantation When Ever Required And Forfollow Up Programming When It Is Required ·Company Must Provide At Least One Programmer Exclusively To The Cardiology Dept. ·Company Must Quote Only The Latest Model Of Devices Commercially Available , Dcgiapproved Permanent Pacemakers With All Leads And Accessories ·Vvir ·All Single Chamber Modes And Basic Pacing Programmable Parameters ·Must Have Ventricular Capture Management ·The Size Of Lead Must Be 7F Or Less ·The Lead Must Be Steroid Eluting And Should Be Both Bipolar And Unipolar Configuration ·Must Have Both Active And Passive Fixation Endocardial Leads Available ·Life Time Replacement Warranty. ·Direct Presence Of Parent Companyin India (Not Only Through The Distributors ) And Company Must Provide Its Trained Technical Person For Each Implantation When Ever Required And Forfollow Up Programming When It Is Required ·Company Must Provide At Least One Programmer Exclusively To The Cardiology Dept. ·Company Must Quote Only The Latest Model Of Devices Commercially Available , D.D.D Pacemaker With All Accessories- Dcgi & Fda Approved /Ce Approved , Dddr Mri Pacemaker With All Accessories -Dcgi & Us Fda/Ce Approved , Dddr Mri Pacemaker With All Accessories And Life Time Warranty -Dcgi & Us Fda/Ce Approved ·Latest And New 3T Full Body Mri, Beat To Beat Capture Mgt, ·Algorithm To Manage Neuro-Cardiogenic Syncope, ·Af Suppression, Optimization Of Av Delay, Congestion Monitoring. , Dicd-40J Deliver Fable Energy - -Dcgi & Us Fda Approved /Ce Approved , Crtp-Quadripolar-Egm Based Dynamic Av Delay Optimization-Dcgi & Us Fda Approved /Ce Approved ·Congestion Monitoring Algorithm ·Capture Management For All Chambers ·Option Of Triggered Biv Pacing During Af ·Capable Of Wireless Telemetry , Crtp-Multipoint Egm Based Dynamic Av Delay Optimization -Dcgi & Us Fda Approved /Ce Approved ·Lv Lead Able To Pace At Two Points In Lv In One Cycle ·Qudripolar Leadwith Mri Compitable Device ·Congestion Monitoring Algorithm ·Capture Management For All Chambers ·Option Of Triggered Biv Pacing During Af ·Capable Of Wireless Telemetry , Crt-D Quadriopolar Df-4 Fda/Ce Approved Latest And New 40J Deliver Fable Energy – -Dcgi & Us Fda Approved /Ce Approved ·Full Body Mri, Congestion Monitoringng Rv Lead 7F Or Less ·Af Suppression ·Egm Based Av Delay Optimization ·Mechanism For Narrow Qrs By Synchronizing Intrinsic And Paced Pulses , Crt-D Multipoint Df-4 Fda/Ce Approved Latest And New 40J Deliver Fable Energy- -Dcgi & Us Fda /Ce Approved ·Full Body Mri, Congestion Monitoringng Rv Lead 7F Or Less ·Af Suppression ·Egm Based Av Delay Optimization ·Mechanism For Narrow Qrs By Synchronizing Intrinsic And Paced Pulses , Us Fda/Ce Approved Permanent Pacemakers With All Leads And Accessories ·Ddd ·Allmodes And Basic Pacing Programmable Parameters Including Hystersis ·The Size Of Lead Must Be 6F Or Less ·The Lead Must Be Steroid Eluting And Should Be Both Bipolar And Unipolar Configuration ·Must Have Both Active And Passive Fixation Endocardial Leads Available ··Direct Presence Of Parent Companyin India (Not Only Through The Distributors ) And Company Must Provide Its Trained Technical Person For Each Implantation When Ever Required And Forfollow Up Programming When It Is Required ·Company Must Provide At Least One Programmer Exclusively To The Cardiology Dept. ·Company Must Quote Only The Latest Model Of Devices Commercially Available , Us Fda/Ce Approved Permanent Pacemakers With All Leads And Accessories ·Ddd ·Allmodes And Basic Pacing Programmable Parameters Including Hystersis ·The Size Of Lead Must Be 6F Or Less And With His Bundal Pacing Lead ·The Lead Must Be Steroid Eluting And Should Be Both Bipolar And Unipolar Configuration ·Must Have Both Active And Passive Fixation Endocardial Leads Available ·Direct Presence Of Parent Companyin India (Not Only Through The Distributors ) And Company Must Provide Its Trained Technical Person For Each Implantation When Ever Required And Forfollow Up Programming When It Is Required ·Company Must Provide At Least One Programmer Exclusively To The Cardiology Dept. ·Company Must Quote Only The Latest Model Of Devices Commercially Available , Dcgiapproved Permanent Pacemakers With All Leads And Accessories ·Ddd ·Allmodes And Basic Pacing Programmable Parameters Including Hystersis ·The Size Of Lead Must Be 6F Or Less And With His Bundal Pacing Lead ·The Lead Must Be Steroid Eluting And Should Be Both Bipolar And Unipolar Configuration ·Must Have Both Active And Passive Fixation Endocardial Leads Available · ·Direct Presence Of Parent Companyin India (Not Only Through The Distributors ) And Company Must Provide Its Trained Technical Person For Each Implantation When Ever Required And Forfollow Up Programming When It Is Required ·Company Must Provide At Least One Programmer Exclusively To The Cardiology Dept. ·Company Must Quote Only The Latest Model Of Devices Commercially Available , Dcgi Approved Permanent Pacemakers With All Leads And Accessories ·Ddd ·Allmodes And Basic Pacing Programmable Parameters Including Hystersis ·The Size Of Lead Must Be 6F Or Less - His/Lbba Pacing ·The Lead Must Be Steroid Eluting And Should Be Both Bipolar And Unipolar Configuration ·Must Have Both Active And Passive Fixation Endocardial Leads Available ·Life Time Replacement Warranty. ·Direct Presence Of Parent Companyin India (Not Only Through The Distributors ) And Company Must Provide Its Trained Technical Person For Each Implantation When Ever Required And Forfollow Up Programming When It Is Required ·Company Must Provide At Least One Programmer Exclusively To The Cardiology Dept. ·Company Must Quote Only The Latest Model Of Devices Commercially Available , Us Fda/Ce Approved Permanent Pacemakers With All Leads And Accessories ·Dddr ·Allsingle Modes And Basic Pacing Programmable Parameters And With Special Features ·Must Have Approved Algorithm For Atrial Fibrillation Suppression With Programmable Automatic Mode Switch Basel Rate. ·Must Have Ventricular Capture Management - Must Have Mri Compitable ·Must Have P & R Wave Measurement ·The Size Of Lead Must Be 6F Or Less ·The Lead Must Be Steroid Eluting And Should Be Both Bipolar And Unipolar Configuration ·Must Have Both Active And Passive Fixation Endocardial Leads Available ··Direct Presence Of Parent Companyin India (Not Only Through The Distributors ) And Company Must Provide Its Trained Technical Person For Each Implantation When Ever Required And Forfollow Up Programming When It Is Required ·Company Must Provide At Least One Programmer Exclusively To The Cardiology Dept. ·Company Must Quote Only The Latest Model Of Devices Commercially Available , Us Fda/Ce Approved Permanent Pacemakers With All Leads And Accessories ·Dddr ·Allmodes And Basic Pacing Programmable Parameters And Special Features ·Must Have Approved Af Suppression Algorithm & Fluid Monitoring. ·Must Have Ventricular Capture Management ·Must Have P & R Wave Measurement ·The Size Of Lead Must Be 6F Or Less ·The Lead Must Be Steroid Eluting And Should Be Both Bipolar And Unipolar Configuration ·Must Have Both Active And Passive Fixation Endocardial Leads Available ·Life Time Replacement Warranty. ·Direct Presence Of Parent Companyin India (Not Only Through The Distributors ) And Company Must Provide Its Trained Technical Person For Each Implantation When Ever Required And Forfollow Up Programming When It Is Required ·Company Must Provide At Least One Programmer Exclusively To The Cardiology Dept. ·Company Must Quote Only The Latest Model Of Devices Commercially Available , Us Fda/Ce Approved Permanent Pacemakers With All Leads And Accessories ·Dddr ·Allmodes And Basic Pacing Programmable Parameters And Special Features ··Must Have Ventricular Capture Management ·Must Have P & R Wave Measurement - Lbba Pacing System - Style Driven Lead ·The Size Of Lead Must Be 6F Or Less - Must Have Congestion Monitoring ·The Lead Must Be Steroid Eluting And Should Be Both Bipolar And Unipolar Configuration ·Have Feature For Optimization Of Av Delay ·Must Have Both Active And Passive Fixation Endocardial Leads Available ·Life Term Replacement Warranty. ·Direct Presence Of Parent Companyin India (Not Only Through The Distributors ) And Company Must Provide Its Trained Technical Person For Each Implantation When Ever Required And Forfollow Up Programming When It Is Required ·Company Must Provide At Least One Programmer Exclusively To The Cardiology Dept. ·Company Must Quote Only The Latest Model Of Devices Commercially Available , Aicd Single Chamber Pacemaker With All Leads - Us Fda/Ce Approved ,Icd With All Leads ·Single Chamber ·Rv Lead Must Be 7F Or Less - Must Have Mri Compitble ·All Basic Programmable Parameters ·Lead Should Be Steroid Eluting ·Should Have Both Active And Passive Fixation Leads ·Should Be Minimum 8+2 Year Warranty ·Direct Presence Of Parent Companyin India (Not Only Through The Distributors ) And Company Must Provide Its Trained Technical Person For Each Implantation When Ever Required And Forfollow Up Programming When It Is Required ·Company Must Provide At Least One Programmer Exclusively To The Cardiology Dept. ·Company Must Quote Only The Latest Model Of Devices Commercially Available , Aicd Single Chamber Pacemaker With All Leads – Dcgiapproved ,Icd With All Leads ·Single Chamber ·Rv Lead Must Be 7F Or Less - Must Have Mri Compitble ·All Basic Programmable Parameters ·Lead Should Be Steroid Eluting ·Should Have Both Active And Passive Fixation Leads ·Should Be Minimum 8+2 Year Warranty ·Direct Presence Of Parent Companyin India (Not Only Through The Distributors ) And Company Must Provide Its Trained Technical Person For Each Implantation When Ever Required And Forfollow Up Programming When It Is Required ·Company Must Provide At Least One Programmer Exclusively To The Cardiology Dept. ·Company Must Quote Only The Latest Model Of Devices Commercially Available. , Aicd Dual Chamber Pacemaker With All Leads -Us Fda/Ce Approved ,Icd With All Leads And All Accessories ·Dual Chamber ·Rv Lead Must Be 7F Or Less ·All Basic Programmable Parameters ·Lead Should Be Steroid Eluting ·Should Have Both Active And Passive Fixation Leads ·Should Be Minimum 5+3 Year Warranty ·Direct Presence Of Parent Companyin India (Not Only Through The Distributors ) And Company Must Provide Its Trained Technical Person For Each Implantation When Ever Required And Forfollow Up Programming When It Is Required ·Company Must Provide At Least One Programmer Exclusively To The Cardiology Dept. ·Company Must Quote Only The Latest Model Of Devices Commercially Available , Aicd Dual Chamber Pacemaker With All Leads- Dcgiapproved ,Icd With All Leads And All Accessories ·Dual Chamber ·Rv Lead Must Be 9F Or Less ·All Basic Programmable Parameters ·Lead Should Be Steroid Eluting ·Should Have Both Active And Passive Fixation Leads ·Should Be Minimum 5+3 Year Warranty ·Direct Presence Of Parent Companyin India (Not Only Through The Distributors ) And Company Must Provide Its Trained Technical Person For Each Implantation When Ever Required And Forfollow Up Programming When It Is Required ·Company Must Provide At Least One Programmer Exclusively To The Cardiology Dept. ·Company Must Quote Only The Latest Model Of Devices Commercially Available , Aicd Single Chamber Device With All Leads -Icd With All Leads And All Accessories - Dcgiand Us Fda/ Ce Approved ·Should Have Latest Bluetooth Technology Low Energy Communication Enabling Smart Phone Connectivity Through Secured Data Encryption. ·Should Have Multi Point Pacing Delivers Multiple Lv Pacing Pulse/Cardiac Cycle In Both Lv And Biv Pacing Modes. ·Should Have Improvised Sync-Av Pulse Crt Technology Offer Dynamic Av Timing. ·40 J Delivered Energy For Enhanced Safety Margin ·Should Have Full Body 3-Tesla Mri Compatibility. ·Direct Presence Of Parent Companyin India (Not Only Through The Distributors) And Company Must Provide Its Trained Technical Person For Each Implantation Whenever Required And Forfollow Up Programming When It Is Required. ·Company Must Provide At Least One Programmer Exclusively To The Cardiology Dept., ·Company Must Quote Only The Latest Model Of Devices Commercially Available. , Aicd Dual Chamber Device With All Leads -Icd With All Leads And All Accessories - Dcgiand Us Fda/ Ce Approved ·Should Have Latest Bluetooth Technology Low Energy Communication Enabling Smart Phone Connectivity Through Secured Data Encryption. ·Should Have Multi Point Pacing Delivers Multiple Lv Pacing Pulse/Cardiac Cycle In Both Lv And Biv Pacing Modes. ·Should Have Improvised Sync-Av Pulse Crt Technology Offer Dynamic Av Timing. ·40 J Delivered Energy For Enhanced Safety Margin ·Should Have Full Body 3-Tesla Mri Compatibility. ·Direct Presence Of Parent Companyin India (Not Only Through The Distributors) And Company Must Provide Its Trained Technical Person For Each Implantation Whenever Required And Forfollow Up Programming When It Is Required. ·Company Must Provide At Least One Programmer Exclusively To The Cardiology Dept., ·Company Must Quote Only The Latest Model Of Devices Commercially Available , Us Fda/Ce Approved, Biventricular Pacemaker With Atrial,Rv, Lv Leads And All Accessories Required During Implantation ·Must Have Separate Programmable Rv, Lv Lead Amplitude, Pulse Width And Vv Delay And Should Have Following Special Features ·Must Have Facility For Egm Based Optimization Of Av, Pv And Vv Delays ·The Size Of Atrial And Rv Leads Should Be 7F Or Less ·The Leads Should Be Steroid Eluting And Should Be Bipolar And Unkipolar Configuration ·Should Have Both Active And Passive Fixation Ra & Rv Endocardial Leads ·Should Have Epicardial Lead For Epicardial Lv Lead Implantation ·Replacement Warranty Not Less Than 5 Years ·Direct Presence Of Parent Companyin India (Not Only Through The Distributors ) And Company Must Provide Its Trained Technical Person For Each Implantation When Ever Required And Forfollow Up Programming When It Is Required ·Company Must Provide At Least One Programmer Exclusively To The Cardiology Dept. ·Company Must Quote Only The Latest Model Of Devices Commercially Available , Dcgiapproved, Biventricular Pacemaker With Atrial,Rv, Lv Leads And All Accessories Required During Implantation ·Must Have Separate Programmable Rv, Lv Lead Amplitude, Pulse Width And Vv Delay And Should Have Following Special Features ·Must Have Facility For Egm Based Optimization Of Av, Pv And Vv Delays ·The Size Of Atrial And Rv Leads Should Be 7F Or Less ·The Leads Should Be Steroid Eluting And Should Be Bipolar And Unkipolar Configuration ·Should Have Both Active And Passive Fixation Ra & Rv Endocardial Leads ·Should Have Epicardial Lead For Epicardial Lv Lead Implantation ·Replacement Warranty Not Less Than 5 Years ·Direct Presence Of Parent Companyin India (Not Only Through The Distributors ) And Company Must Provide Its Trained Technical Person For Each Implantation When Ever Required And Forfollow Up Programming When It Is Required ·Company Must Provide At Least One Programmer Exclusively To The Cardiology Dept. , Us Fda/Ce Approved Biventricular Pacemaker + Icd (Combo Device) With Atrial, Rv, Lv Leads And All Accessories Rquired During Impantation ·Must Have All Basic Programmable Parameters ·Must Have Separate Programmable Rv, Lv Lead Amplitude, Pulse Width And Vv Delay ·The Leads Should Be Steroid Eluting ·Should Have Both Active And Passive Fixation Ra & Rv Endocardial Leadsr - Rv Lead 7F Or Less ·Should Have Epicardial Lead For Epicardial Lv Lead Implantation ·Replacement Warranty Not Less Than 3 + 2 Years ·Direct Presence Of Parent Companyin India (Not Only Through The Distributors ) And Company Must Provide Its Trained Technical Person For Each Implantation When Ever Required And Forfollow Up Programming When It Is Required ·Company Must Provide At Least One Programmer Exclusively To The Cardiology Dept. ·Company Must Quote Only The Latest Model Of Devices Commercially Available , Dcgiapproved Biventricular Pacemaker + Icd (Combo Device) With Atrial, Rv, Lv Leads And All Accessories Rquired During Impantation ·Must Have All Basic Programmable Parameters ·Must Have Separate Programmable Rv, Lv Lead Amplitude, Pulse Width And Vv Delay ·The Leads Should Be Steroid Eluting ·Should Have Both Active And Passive Fixation Ra & Rv Endocardial Leads ·Should Have Epicardial Lead For Epicardial Lv Lead Implantation ·Replacement Warranty Not Less Than 3 + 2 Years ·Direct Presence Of Parent Companyin India (Not Only Through The Distributors ) And Company Must Provide Its Trained Technical Person For Each Implantation When Ever Required And Forfollow Up Programming When It Is Required ·Company Must Provide At Least One Programmer Exclusively To The Cardiology Dept. ·Company Must Quote Only The Latest Model Of Devices Commercially Available , Us Fda/Ce Approved Biventricular Pacemaker + Icd (Combo Device) With Atrial, Rv, Lv Leads And All Accessories Rquired During Impantation ·Must Have Quadripolar Lead For Lv Pacing ·Must Have All Basic Programmable Parameters With Following Special Features ·Facility Of Atp During Charging For Defibrillation ·Must Have Separate Programmable Rv, Lv Lead Amplitude, Pulse Width And Vv Delay ·Must Have Fluidmonitoring System - Rv Lead 7F Or Less ·The Leads Should Be Steroid Eluting ·Should Have Both Active And Passive Fixation Ra & Rv Endocardial Leads ·Should Have Epicardial Lead For Epicardial Lv Lead Implantation ·Replacement Warranty Not Less Than 3 + 2 Years ·Direct Presence Of Parent Companyin India (Not Only Through The Distributors ) And Company Must Provide Its Trained Technical Person For Each Implantation When Ever Required And Forfollow Up Programming When It Is Required ·Company Must Provide At Least One Programmer Exclusively To The Cardiology Dept. , Dcgiapproved Biventricular Pacemaker + Icd (Combo Device) With Atrial, Rv, Lv Leads And All Accessories Rquired During Impantation ·Must Have Quadripolar Lead For Lv Pacing ·Must Have All Basic Programmable Parameters With Following Special Features ·Facility Of Atp During Charging For Defibrillation ·Must Have Separate Programmable Rv, Lv Lead Amplitude, Pulse Width And Vv Delay ·Must Have Fluidmonitoring System ·The Leads Should Be Steroid Eluting ·Should Have Both Active And Passive Fixation Ra & Rv Endocardial Leads ·Should Have Epicardial Lead For Epicardial Lv Lead Implantation ·Replacement Warranty Not Less Than 3 + 2 Years ·Direct Presence Of Parent Companyin India (Not Only Through The Distributors ) And Company Must Provide Its Trained Technical Person For Each Implantation When Ever Required And Forfollow Up Programming When It Is Required ·Company Must Provide At Least One Programmer Exclusively To The Cardiology Dept. ·Company Must Quote Only The Latest Model Of Devices Commercially Available , Us Fda/Ce Approved Biventricular Pacemaker + Icd (Combo Device) With Atrial, Rv, Lv Leads And All Accessories Rquired During Impantation ·Must Have Separate Programmable Rv, Lv Lead Amplitude, Pulse Width And Vv Delay And Shouldhave Following Special Feature ·The Lv Lead Must Be Quadripolar. - Rv Lead Must Be 7F Or Less ·The Leads Should Be Steroid Elutingand Should Be Both Bipolar And Unipolar ·Should Have Both Active And Passive Fixation Ra & Rv Endocardial Leads ·Should Have Epicardial Lead For Epicardial Lv Lead Implantation ·Replacement Warranty Not Less Than 3 + 2 Years ·Direct Presence Of Parent Companyin India (Not Only Through The Distributors ) And Company Must Provide Its Trained Technical Person For Each Implantation When Ever Required And Forfollow Up Programming When It Is Required ·Company Must Provide At Least One Programmer Exclusively To The Cardiology Dept. ·Company Must Quote Only The Latest Model Of Devices Commercially Available , Dcgiapproved Biventricular Pacemaker + Icd (Combo Device) With Atrial, Rv, Lv Leads And All Accessories Rquired During Impantation ·Must Have Separate Programmable Rv, Lv Lead Amplitude, Pulse Width And Vv Delay And Shouldhave Following Special Feature ·The Lv Lead Must Be Quadripolar. ·The Leads Should Be Steroid Elutingand Should Be Both Bipolar And Unipolar ·Should Have Both Active And Passive Fixation Ra & Rv Endocardial Leads ·Should Have Epicardial Lead For Epicardial Lv Lead Implantation ·Replacement Warranty Not Less Than 3 + 2 Years ·Direct Presence Of Parent Companyin India (Not Only Through The Distributors ) And Company Must Provide Its Trained Technical Person For Each Implantation When Ever Required And Forfollow Up Programming When It Is Required ·Company Must Provide At Least One Programmer Exclusively To The Cardiology Dept. ·Company Must Quote Only The Latest Model Of Devices Commercially Available , Lead Less Pacemaker With All Accessories.–Dcgiand Us Fda/ Ce Approved Vvi, Mri Compitable Must Have Retrievable Option , Lead Less Pacemaker With All Accessories.–Dcgiand Us Fda/ Ce Approved Ddd Mri Compitable Must Have Retrievable Option , Crt- D Combo Device With All Leads -Icd With All Leads And All Accessories - Dcgiand Us Fda/ Ce Approved ·Should Have Latest Bluetooth Technology Low Energy Communication Enabling Smart Phone Connectivity Through Secured Data Encryption. ·Should Have Multi Point Pacing Delivers Multiple Lv Pacing Pulse/Cardiac Cycle In Both Lv And Biv Pacing Modes. ·Should Have Improvised Sync-Av Pulse Crt Technology Offer Dynamic Av Timing. ·40 J Delivered Energy For Enhanced Safety Margin ·Should Have Full Body 3-Tesla Mri Compatibility. , Dcgiapproved Permanent Pacemakers With All Leads And Accessories Vvi ? All Single Chamber Modes And Basic Pacing Programmable Parameters ? The Size Of Lead Must Be 7F Or Less ? The Lead Must Be Steroid Eluting And Should Be Both Bipolar And Unipolar Configuration ? Must Have Both Active And Passive Fixation Endocardial Leads Available ? Life Time Replacement Warranty. ? Direct Presence Of Parent Companyin India (Not Only Through The Distributors ) And Company Must Provide Its Trained Technical Person For Each Implantation When Ever Required And Forfollow Up Programming When It Is Required ? Company Must Provide At Least One Programmer Exclusively To The Cardiology Dept. ? Company Must Quote Only The Latest Model Of Devices Commercially Available , Us Fda/Ce Approved Permanent Pacemakers With All Leads And Accessories ? Vvir ? All Single Chamber Modes And Basic Pacing Programmable Parameters ? Must Have Mri Compatible ? Must Have Programmable Sensor Control Rest Rate ? Must Have Ventricular Capture Management ? The Size Of Lead Must Be 8F Or Less ? The Lead Must Be Steroid Eluting And Should Be Both Bipolar And Uni-Polar Configuration ? Must Have Both Active And Passive Fixation Endo-Cardial Leads Available ? Life Time Replacement Warranty. ? Direct Presence Of Parent Companyin India (Not Only Through The Distributors ) And Company Must Provide Its Trained Technical Person For Each Implantation When Ever Required And Forfollow Up Programming When It Is Required , Dcgiapproved Permanent Pacemakers With All Leads And Accessories Vvir ? All Single Chamber Modes And Basic Pacing Programmable Parameters ? Must Have Mri Compatible ? Must Have Programmable Sensor Control Rest Rate ? Must Have Ventricular Capture Management ? The Size Of Lead Must Be 8F Or Less ? The Lead Must Be Steroid Eluting And Should Be Both Bipolar And Uni-Polar Configuration ? Must Have Both Active And Passive Fixation Endo- Cardial Leads Available ? Life Time Replacement Warranty. ? Direct Presence Of Parent Companyin India (Not Only Through The Distributors ) And Company Must Provide Its Trained Technical Person For Each Implantation When Ever Required And Forfollow Up Programming When It Is Required ? Company Must Provide At Least One Programmer Exclusively To The Cardiology Dept. ?Company Must Quote Only The Latest Model Of Devices Commercially Available , Us Fda/Ce Approved Permanent Pacemakers With All Leads And Accessories • Vvir • All Single Chamber Modes And Basic Pacing Programmable Parameters • Must Have Mri Compatible • Must Have Programmable Sensor Control Rest Rate • Must Have Ventricular Capture Management • The Size Of Lead Must Be 8F Or Less • The Lead Must Be Steroid Eluting And Should Be Both Bipolar And Uni-Polar Configuration • Must Have Both Active And Passive Fixation Endo-Cardial Leads Available • Life Time Replacement Warranty. • Direct Presence Of Parent Company In India (Not Only Through The Distributors ) And Company Must Provide Its Trained Technical Person For Each Implantation When Ever Required And For Follow Up Programming When It Is Required • Company Must Provide At Least One Programmer Exclusively To The Cardiology Dept. Company Must Quote Only The Latest Model Of Devices Commercially Available. , V.V.I Pacemaker With All Accessories And Life Time Warranty -Dcgi & Us Fda/Ce Approved • Latest And New Full Body Mri, Beat To Beat Capture Mgt, , D.D.D Pacemaker With All Accessories And Life Time Warranty- Dcgi & Fda Approved /Ce Approved , Dddr Mri Pacemaker With All Accessories And Life Time Warranty -Dcgi & Us Fda/Ce Approved , Sicd (Aicd) Df1 Connector--Dcgi & Us Fda Approved /Ce , Dicd-40J Deliver Fable Energy - -Dcgi & Us Fda Approved /Ce Approved , Crtp-Quadripolar-Egm Based Dynamic Av Delay Optimization-Dcgi & Us Fda Approved /Ce Approved ? Congestion Monitoring Algorithm ? Capture Management For All Chambers ? Option Of Triggered Biv Pacing During Af, ? Capable Of Wireless Telemetry , Crt-D Quadriopolar Df-4 Fda/Ce Approved Latest And New 40J Deliver Fable Energy – -Dcgi & Us Fda Approved /Ce Approved ·Full Body Mri, Congestion Monitoringng ·Af Suppression ·Egm Based Av Delay Optimization ·Mechanism For Narrow Qrs By Synchronizing Intrinsic And Paced Pulses , Crt-D Multipoint Df-4 Fda/Ce Approved Latest And New 40J Deliver Fable Energy- -Dcgi & Us Fda /Ce Approved ·Full Body Mri, Congestion Monitoringng ·Af Suppression ·Egm Based Av Delay Optimization ·Mechanism For Narrow Qrs By Synchronizing Intrinsic And Paced Pulses , Sub-Cutenous Icd Implant (Sc- I.C.D.)With All Accessories- Dcgi & Us Fda Approved /Ce Approved , Permanent Pacemakers With All Leads And Accessories - Us Fda/Ce Approved ? Vdd ? All Vdd & Single Chamber Modes And Basic Pacing Programmable Parameters And With Following Special Features ? Must Have Ventricular Capture Management ? The Size Of Lead Must Be 9F Or Less ? The Lead Must Be Steroid Eluting And Should Be Both Bipolar Configuration ? Having Passive Fixation Endocardial Leads Available ? Life Time Replacement Warranty. ? Direct Presence Of Parent Companyin India (Not Only Through The Distributors ) And Company Must Provide Its Trained ? Technical Person For Each Implantation When Ever Required And Forfollow Up Programming When It Is Required ? Company Must Provide At Least One Programmer Exclusively To The Cardiology Dept. Company Must Quote Only The Latest Model Of Devices Commercially Available. , Permanent Pacemakers With All Leads And Accessories - Dcgiapproved ? Vdd ? All Vdd & Single Chamber Modes And Basic Pacing Programmable Parameters And With Following Special Features ? Must Have Ventricular Capture Management ? The Size Of Lead Must Be 9F Or Less ? The Lead Must Be Steroid Eluting And Should Be Both Bipolar Configuration ? Having Passive Fixation Endocardial Leads Available ? Life Time Replacement Warranty. ? Direct Presence Of Parent Companyin India (Not Only Through The Distributors ) And Company Must Provide Its Trained ? Technical Person For Each Implantation When Ever Required And Forfollow Up Programming When It Is Required ? Company Must Provide At Least One Programmer Exclusively To The Cardiology Dept. ?Company Must Quote Only The Latest Model Of Devices Commercially Available , Us Fda/Ce Approved Permanent Pacemakers With All Leads And Accessories ? Ddd ? Allmodes And Basic Pacing Programmable Parameters Including Hystersis ? The Size Of Lead Must Be 7F Or Less ? The Lead Must Be Steroid Eluting And Should Be Both Bipolar And Unipolar Configuration ? Must Have Both Active And Passive Fixation Endocardial Leads Available ? Life Time Replacement Warranty. ? Direct Presence Of Parent Companyin India (Not Only Through The Distributors ) And Company Must Provide Its Trained Technical Person For Each Implantation When Ever Required And Forfollow Up Programming When It Is Required ? Company Must Provide At Least One Programmer Exclusively To The Cardiology Dept. ? Company Must Quote Only The Latest Model Of Devices Commercially Available , Dcgiapproved Permanent Pacemakers With All Leads And Accessories ? Ddd ? Allmodes And Basic Pacing Programmable Parameters Including Hystersis ? The Size Of Lead Must Be 7F Or Less ? The Lead Must Be Steroid Eluting And Should Be Both Bipolar And Unipolar Configuration ? Must Have Both Active And Passive Fixation Endocardial Leads Available ? Life Time Replacement Warranty. ? Direct Presence Of Parent Companyin India (Not Only Through The Distributors ) And Company Must Provide Its Trained Technical Person For Each Implantation When Ever Required And Forfollow Up Programming When It Is Required ? Company Must Provide At Least One Programmer Exclusively To The Cardiology Dept. ? Company Must Quote Only The Latest Model Of Devices Commercially Available , Us Fda/Ce Approved Permanent Pacemakers With All Leads And Accessories ? Dddr ? Allsingle Modes And Basic Pacing Programmable Parameters And With Special Features ? Must Have Approved Algorithm For Atrial Fibrillation Suppression With Programmable Automatic Mode Switch Basel Rate. ? Must Have Ventricular Capture Management ? Must Have P & R Wave Measurement ? The Size Of Lead Must Be 7F Or Less ? The Lead Must Be Steroid Eluting And Should Be Both Bipolar And Unipolar Configuration ? Must Have Both Active And Passive Fixation Endocardial Leads Available ? Life Time Replacement Warranty. ? Direct Presence Of Parent Companyin India (Not Only Through The Distributors ) And Company Must Provide Its Trained Technical Person For Each Implantation When Ever Required And Forfollow Up Programming When It Is Required ? Company Must Provide At Least One Programmer Exclusively To The Cardiology Dept. ? Company Must Quote Only The Latest Model Of Devices Commercially Available , Us Fda/Ce Approved Permanent Pacemakers With All Leads And Accessories ? Dddr ? Allmodes And Basic Pacing Programmable Parameters And Special Features ? Must Have Approved Atrial Tachycardia Management Algorithm & Fluid Monitoring. ? Must Have Ventricular Capture Management ? Must Have P & R Wave Measurement ? The Size Of Lead Must Be 7F Or Less ? The Lead Must Be Steroid Eluting And Should Be Both Bipolar And Unipolar Configuration ? Must Have Both Active And Passive Fixation Endocardial Leads Available ? Life Time Replacement Warranty. ? Direct Presence Of Parent Companyin India (Not Only Through The Distributors ) And Company Must Provide Its Trained Technical Person For Each Implantation When Ever Required And Forfollow Up Programming When It Is Required ? Company Must Provide At Least One Programmer Exclusively To The Cardiology Dept. ? Company Must Quote Only The Latest Model Of Devices Commercially Available , Aicd Single Chamber Pacemaker With All Leads - Us Fda/Ce Approved ,Icd With All Leads Single Chamber ? Rv Lead Must Be 9F Or Less ? All Basic Programmable Parameters ? Lead Should Be Steroid Eluting ? Should Have Both Active And Passive Fixation Leads ? Should Be Minimum 5+3 Year Warranty ? Direct Presence Of Parent Companyin India (Not Only Through The Distributors ) And Company Must Provide Its Trained Technical Person For Each Implantation When Ever Required And Forfollow Up Programming When It Is Required ? Company Must Provide At Least One Programmer Exclusively To The Cardiology Dept. ? Company Must Quote Only The Latest Model Of Devices Commercially Available , Aicd Single Chamber Pacemaker With All Leads – Dcgiapproved ,Icd With All Leads ? Single Chamber ? Rv Lead Must Be 9F Or Less ? All Basic Programmable Parameters ? Lead Should Be Steroid Eluting ? Should Have Both Active And Passive Fixation Leads ? Should Be Minimum 5+3 Year Warranty ? Direct Presence Of Parent Companyin India (Not Only Through The Distributors ) And Company Must Provide Its Trained Technical Person For Each Implantation When Ever Required And Forfollow Up Programming When It Is Required ? Company Must Provide At Least One Programmer Exclusively To The Cardiology Dept. ? Company Must Quote Only The Latest Model Of Devices Commercially Available. , Aicd Dual Chamber Pacemaker With All Leads -Us Fda/Ce Approved ,Icd With All Leads And All Accessories ? Dual Chamber ? Rv Lead Must Be 9F Or Less ? All Basic Programmable Parameters ? Lead Should Be Steroid Eluting ? Should Have Both Active And Passive Fixation Leads ? Should Be Minimum 5+3 Year Warranty ? Direct Presence Of Parent Companyin India (Not Only Through The Distributors ) And Company Must Provide Its Trained Technical Person For Each Implantation When Ever Required And Forfollow Up Programming When It Is Required ? Company Must Provide At Least One Programmer Exclusively To The Cardiology Dept. ? Company Must Quote Only The Latest Model Of Devices Commercially Available , Aicd Dual Chamber Pacemaker With All Leads- Dcgiapproved ,Icd With All Leads And All Accessories ? Dual Chamber ? Rv Lead Must Be 9F Or Less ? All Basic Programmable Parameters ? Lead Should Be Steroid Eluting ? Should Have Both Active And Passive Fixation Leads ? Should Be Minimum 5+3 Year Warranty ? Direct Presence Of Parent Companyin India (Not Only Through The Distributors ) And Company Must Provide Its Trained Technical Person For Each Implantation When Ever Required And Forfollow Up Programming When It Is Required ? Company Must Provide At Least One Programmer Exclusively To The Cardiology Dept. ? Company Must Quote Only The Latest Model Of Devices Commercially Available , Aicd Dual Chamber Pacemaker With All Leads- Us Fda/Ce Approved ,Icd With All Leads And All Accessories ? Dual Chamber ? All Basic Programmable Parameters ? Must Have Shockreduction Technology With Fluid Monitoring ? Lead Should Be Steroid Eluting ? Lead Should Be Df-1& Df-4 Compatible ? Replacement Warranty As Per Norms ? Direct Presence Of Parent Companyin India (Not Only Through The Distributors ) And Company Must Provide Its Trained Technical Person For Each Implantation When Ever Required And Forfollow Up Programming When It Is Required ? Company Must Provide At Least One Programmer Exclusively To The Cardiology Dept. , Aicd Dual Chamber Pacemaker With All Leads - Dcgi Approved, Icd With All Leads And All Accessories ? Dual Chamber ? All Basic Programmable Parameters ? Must Have Shockreduction Technology With Fluid Monitoring ? Lead Should Be Steroid Eluting ? Lead Should Be Df-1& Df-4 Compatible ? Replacement Warranty As Per Norms ? Direct Presence Of Parent Companyin India (Not Only Through The Distributors ) And Company Must Provide Its Trained Technical Person For Each Implantation When Ever Required And Forfollow Up Programming When It Is Required ? Company Must Provide At Least One Programmer Exclusively To The Cardiology Dept. ? Company Must Quote Only The Latest Model Of Devices Commercially Available , D/C Icd Single Chamber Device Mri With All Leads And All Accessories - Dcgiand Us Fda/ Ce Approved ? Should Have Advanced Feature Of Automatic Av Search, And Adjustable Av Delay Etc. ? Direct Presence Of Parent Company In India (Not Only Through The Distributors) And Company Must Provide Its Trained Technical Person For Each Implantation Whenever Required And For Follow Up Programming When It Is Required. ? Company Must Provide At Least One Programmer Exclusively To The Cardiology Dept., ? Company Must Quote Only The Latest Model Of Devices Commercially Available. , S/C Icd Single Chamber Device Mri With All Leads And All Accessories - Dcgiand Us Fda/ Ce Approved ? Should Have Labelled Projected Longevity Of > 12Years With Warranty Not Less Than 8 + 2 Years. ? Direct Presence Of Parent Company In India (Not Only Through The Distributors) And Company Must Provide Its Trained Technical Person For Each Implantation Whenever Required And For Follow Up Programming When It Is Required. ? Company Must Provide At Least One Programmer Exclusively To The Cardiology Dept., ? Company Must Quote Only The Latest Model Of Devices Commercially Available. , Us Fda/Ce Approved Implantable Loop Recorder ? Must Be Able To Detect Asystole, Brady Arrhythmia And Vt/Fvt ? Must Have The Storage Capacity Of >45 Minutes. ? Must Have Dynamic Sensing Threshold For R Wave Sensing Along With Noise Reversion ? Must Have A Patient Tool For Symptomatic Recording ? Must Have At Least 35 Months Of Longevity ? Must Be Compatible With Remote Monitoring Devices, ? Direct Presence Of Parent Companyin India (Not Only Through The Distributors ) And Company Must Provide Its Trained Technical Person For Each Implantation Whenever Required And Forfollow Up Programming When It Is Required ? Company Must Provide At Least One Programmer Exclusively To The Cardiology Dept. ? Company Must Quote Only The Latest Model Of Devices Commercially Available , Dcgi Approved Implantable Loop Recorder ? Must Be Able To Detect Asystole, Bradyarrhythmia And Vt/Fvt ? Must Have The Storage Capacity Of >45 Minutes. ? Must Have Dynamic Sensing Threshold For R Wave Sensing Along With Noise Reversion ? Must Have A Patient Tool For Symptomatic Recording ? Must Have At Least 35 Months Of Longevity ? Must Be Compatible With Remote Monitoring Devices ? Direct Presence Of Parent Companyin India (Not Only Through The Distributors ) And Company Must Provide Its Trained Technical Person For Each Implantation Whenever Required And Forfollow Up Programming When It Is Required ? Company Must Provide At Least One Programmer Exclusively To The Cardiology Dept. ? Company Must Quote Only The Latest Model Of Devices Commercially Available , Us Fda/Ce Approved Implantable Loop Recorder For Af Detection ? Must Be Able To Detect Asystole, Bradyarrhythmia, Vt/Fvt And At/Af ? Must Have The Storage Capacity Of >45 Minutes. ? Must Have Dynamic Sensing Threshold For R Wave Sensing Along With Noise Reversion ? Must Have A Patient Tool For Symptomatic Recording Along With Alerts. ? Must Be Able To Give Af Burden Reports To Monitor The Progress Of Chronic Af Patients. ? Must Have At Least 35 Months Of Longevity ? Must Be Compatible With Remote Monitoring Devices ? Direct Presence Of Parent Companyin India (Not Only Through The Distributors ) And Company Must Provide Its Trained Technical Person For Each Implantation Whenever Required And Forfollow Up Programming When It Is Required ? Company Must Provide At Least One Programmer Exclusively To The Cardiology Dept. ? Company Must Quote Only The Latest Model Of Devices Commercially Available , ? Dcgi Approved Implantable Loop Recorder For Af Detection ?Must Be Able To Detect Asystole, Brady-Arrhythmia, Vt/Fvt And At/Af ? Must Have The Storage Capacity Of >45 Minutes. ? Must Have Dynamic Sensing Threshold For R Wave Sensing Along With Noise Reversion ? Must Have A Patient Tool For Symptomatic Recording Along With Alerts. ? Must Be Able To Give Af Burden Reports To Monitor The Progress Of Chronic Af Patients. ? Must Have At Least 35 Months Of Longevity ? Must Be Compatible With Remote Monitoring Devices, ? Direct Presence Of Parent Companyin India (Not Only Through The Distributors ) And Company Must Provide Its Trained Technical Person For Each Implantation Whenever Required And Forfollow Up Programming When It Is Required ? Company Must Provide At Least One Programmer Exclusively To The Cardiology Dept. ? Company Must Quote Only The Latest Model Of Devices Commercially Available , Us Fda/Ce Approved, Biventricular Pacemaker With Atrial,Rv, Lv Leads And All Accessories Required During Implantation ? Must Have Separate Programmable Rv, Lv Lead Amplitude, Pulse Width And Vv Delay And Should Have Following Special Features ? Must Have Facility For Egm Based Optimization Of Av, Pv And Vv Delays ? The Size Of Atrial And Rv Leads Should Be 7F Or Less ? The Leads Should Be Steroid Eluting And Should Be Bipolar And Unkipolar Configuration ? Should Have Both Active And Passive Fixation Ra & Rv Endocardial Leads ? Should Have Epicardial Lead For Epicardial Lv Lead Implantation ? Replacement Warranty Not Less Than 5 Years ? Direct Presence Of Parent Companyin India (Not Only Through The Distributors ) And Company Must Provide Its Trained Technical Person For Each Implantation When Ever Required And Forfollow Up Programming When It Is Required ? Company Must Provide At Least One Programmer Exclusively To The Cardiology Dept. ? Company Must Quote Only The Latest Model Of Devices Commercially Available , Dcgiapproved, Biventricular Pacemaker With Atrial,Rv, Lv Leads And All Accessories Required During Implantation ? Must Have Separate Programmable Rv, Lv Lead Amplitude, Pulse Width And Vv Delay And Should Have Following Special Features ? Must Have Facility For Egm Based Optimization Of Av, Pv And Vv Delays ? The Size Of Atrial And Rv Leads Should Be 7F Or Less ? The Leads Should Be Steroid Eluting And Should Be Bipolar And Unkipolar Configuration ? Should Have Both Active And Passive Fixation Ra & Rv Endocardial Leads ? Should Have Epicardial Lead For Epicardial Lv Lead Implantation ? Replacement Warranty Not Less Than 5 Years ? Direct Presence Of Parent Companyin India (Not Only Through The Distributors ) And Company Must Provide Its Trained Technical Person For Each Implantation When Ever Required And Forfollow Up Programming When It Is Required ? Company Must Provide At Least One Programmer Exclusively To The Cardiology Dept. ? Company Must Quote Only The Latest Model Of Devices Commercially Available , Us Fda/Ce Approved Biventricular Pacemaker + Icd (Combo Device) With Atrial, Rv, Lv Leads And All ? Accessories Rquired During Impantation ? Must Have All Basic Programmable Parameters ? Must Have Separate Programmable Rv, Lv Lead Amplitude, Pulse Width And Vv Delay ? The Leads Should Be Steroid Eluting ? Should Have Both Active And Passive Fixation Ra & Rv Endocardial Leads ? Should Have Epicardial Lead For Epicardial Lv Lead Implantation ? Replacement Warranty Not Less Than 3 + 2 Years ? Direct Presence Of Parent Companyin India (Not Only Through The Distributors ) And Company Must Provide Its Trained Technical Person For Each Implantation When Ever Required And Forfollow Up Programming When It Is Required ? Company Must Provide At Least One Programmer Exclusively To The Cardiology Dept. ? Company Must Quote Only The Latest Model Of Devices Commercially Available , Dcgiapproved Biventricular Pacemaker + Icd (Combo Device) With Atrial, Rv, Lv Leads And All Accessories ? Rquired During Impantation ? Must Have All Basic Programmable Parameters ? Must Have Separate Programmable Rv, Lv Lead Amplitude, Pulse Width And Vv Delay ? The Leads Should Be Steroid Eluting ? Should Have Both Active And Passive Fixation Ra & Rv Endocardial Leads ? Should Have Epicardial Lead For Epicardial Lv Lead Implantation ? Replacement Warranty Not Less Than 3 + 2 Years ? Direct Presence Of Parent Companyin India (Not Only Through The Distributors ) And Company Must Provide Its Trained Technical Person For Each Implantation When Ever Required And Forfollow Up Programming When It Is Required ? Company Must Provide At Least One Programmer Exclusively To The Cardiology Dept. ? Company Must Quote Only The Latest Model Of Devices Commercially Available , Us Fda/Ce Approved, Biventricular Pacemaker + Icd (Combo Device) Without Lead • Must Have All Basic Programmable Parameters • Should Have All Parameters Shown In Related Group Of Pacemaker • Replacement Warranty Not Less Than 5 Years • Direct Presence Of Parent Companyin India (Not Only Through The Distributors ) And Company Must Provide Its Trained Technical Person For Each Implantation When Ever Required And Forfollow Up Programming When It Is Required • Company Must Provide At Least One Programmer Exclusively To The Cardiology Dept. • Company Must Quote Only The Latest Model Of Devices Commercially Available , Dcgi Approved, Biventricular Pacemaker + Icd (Combo Device) Without Lead ? Must Have All Basic Programmable Parameters •Should Have All Parameters Shown In Related Group Of Pacemaker •Replacement Warranty Not Less Than 5 Years •Direct Presence Of Parent Companyin India (Not Only Through The Distributors ) And Company Must Provide Its Trained Technical Person For Each Implantation When Ever Required And Forfollow Up Programming When It Is Required •Company Must Provide At Least One Programmer Exclusively To The Cardiology Dept. ? • Company Must Quote Only The Latest Model Of Devices Commercially Available , Us Fda/Ce Approved, Biventricular Pacemaker (Crt) Without Lead ? Must Have All Basic Programmable Parameters ? Should Have All Parameters Shown In Related Group Of Pacemaker ? Replacement Warranty Not Less Than 5 Years ? Direct Presence Of Parent Companyin India (Not Only Through The Distributors ) And Company Must Provide Its Trained Technical Person For Each Implantation When Ever Required And Forfollow Up Programming When It Is Required ? Company Must Provide At Least One Programmer Exclusively To The Cardiology Dept. ? Company Must Quote Only The Latest Model Of Devices Commercially Available , Dcgi Approved, Biventricular Pacemaker (Crt) Without Lead ? Must Have All Basic Programmable Parameters ? Should Have All Parameters Shown In Related Group Of Pacemaker ? Replacement Warranty Not Less Than 5 Years ? Direct Presence Of Parent Companyin India (Not Only Through The Distributors ) And Company Must Provide Its Trained Technical Person For Each Implantation When Ever Required And Forfollow Up Programming When It Is Required ? Company Must Provide At Least One Programmer Exclusively To The Cardiology Dept. ? Company Must Quote Only The Latest Model Of Devices Commercially Available , Us Fda/Ce Approved, Aicd Dual Chamber Pacemaker Without Lead ? Must Have All Basic Programmable Parameters ? Should Have All Parameters Shown In Related Group Of Pacemaker ? Replacement Warranty Not Less Than 5 Years ? Direct Presence Of Parent Companyin India (Not Only Through The Distributors ) And Company Must Provide Its Trained Technical Person For Each Implantation When Ever Required And Forfollow Up Programming When It Is Required ? Company Must Provide At Least One Programmer Exclusively To The Cardiology Dept. ? Company Must Quote Only The Latest Model Of Devices Commercially Available , Dcgiapproved, Aicd Dual Chamber Pacemaker Without Lead ? Must Have All Basic Programmable Parameters ? Should Have All Parameters Shown In Related Group Of Pacemaker ? Replacement Warranty Not Less Than 5 Years ? Direct Presence Of Parent Companyin India (Not Only Through The Distributors ) And Company Must Provide Its Trained Technical Person For Each Implantation When Ever Required And Forfollow Up Programming When It Is Required ? Company Must Provide At Least One Programmer Exclusively To The Cardiology Dept. ? Company Must Quote Only The Latest Model Of Devices Commercially Available , Us Fda/Ce Approved, Aicd Singlechamber Pacemaker Without Lead ?Must Have All Basic Programmable Parameters ? Should Have All Parameters Shown In Related Group Of Pacemaker ? Replacement Warranty Not Less Than 5 Years ? Direct Presence Of Parent Companyin India (Not Only Through The Distributors ) And Company Must Provide Its Trained Technical Person For Each Implantation When Ever Required And Forfollow Up Programming When It Is Required ? Company Must Provide At Least One Programmer Exclusively To The Cardiology Dept. ? Company Must Quote Only The Latest Model Of Devices Commercially Available , Dcgiapproved, Aicd Singlechamber Pacemaker Without Lead ? Must Have All Basic Programmable Parameters ? Should Have All Parameters Shown In Related Group Of Pacemaker ? Replacement Warranty Not Less Than 5 Years ? Direct Presence Of Parent Companyin India (Not Only Through The Distributors ) And Company Must Provide Its Trained Technical Person For Each Implantation When Ever Required And Forfollow Up Programming When It Is Required ? Company Must Provide At Least One Programmer Exclusively To The Cardiology Dept. ? Company Must Quote Only The Latest Model Of Devices Commercially Available , ? Us Fda/Ce Approved, Vdd/Vddr Permanent Pacemaker Without Lea ? Vdd/Vddr ? All Vdd & Single Chamber Modes And Basic Pacingprogrammable Parameters And With Following Special Features ? Should Have All Parameters Shown In Related Group Of Pacemaker ? Life Term Replacement Warranty ? Direct Presence Of Parent Companyin India (Not Only Through The Distributors ) And Company Must Provide Its Trained Technical Person For Each Implantation When Ever Required And Forfollow Up Programming When It Is Required ? Company Must Provide At Least One Programmer Exclusively To The Cardiology Dept. ? Company Must Quote Only The Latest Model Of Devices Commercially Available , Dcgiapproved, Vdd/Vddr Permanent Pacemaker Without Lead ? Vdd/Vddr ? All Vdd & Single Chamber Modes And Basic Pacingprogrammable Parameters And With Following Special Features ? Should Have All Parameters Shown In Related Group Of Pacemaker ? Life Term Replacement Warranty ? Direct Presence Of Parent Companyin India (Not Only Through The Distributors ) And Company Must Provide Its Trained Technical Person For Each Implantation When Ever Required And Forfollow Up Programming When It Is Required ? Company Must Provide At Least One Programmer Exclusively To The Cardiology Dept. ? Company Must Quote Only The Latest Model Of Devices Commercially Available , Us Fda/Ce Approved, Ddd Permanent Pacemaker Without Lead ? Ddd ? All Modes And Basic Pacingprogrammable Parameters Including Hysteresis ? Should Have All Parameters Shown In Related Group Of Pacemaker ? Life Term Replacement Warranty ? Direct Presence Of Parent Companyin India (Not Only Through The Distributors ) And Company Must Provide Its Trained Technical Person For Each Implantation When Ever Required And Forfollow Up Programming When It Is Required ? Company Must Provide At Least One Programmer Exclusively To The Cardiology Dept. ? Company Must Quote Only The Latest Model Of Devices Commercially Available , Dcgiapproved, Ddd Permanent Pacemaker Without Lead ? Ddd ? All Modes And Basic Pacingprogrammable Parameters Including Hysteresis ? Should Have All Parameters Shown In Related Group Of Pacemaker ? Life Term Replacement Warranty ? Direct Presence Of Parent Companyin India (Not Only Through The Distributors ) And Company Must Provide Its Trained Technical Person For Each Implantation When Ever Required And Forfollow Up Programming When It Is Required ? Company Must Provide At Least One Programmer Exclusively To The Cardiology Dept. ?Company Must Quote Only The Latest Model Of Devices Commercially Available , Us Fda/Ce Approved, Vvi Permanent Pacemaker Without Lead ? Vvi ? All Single Chamber Modes And Basic Pacingprogrammable Parameters ? Should Have All Parameters Shown In Related Group Of Pacemaker ? Life Term Replacement Warranty ? Direct Presence Of Parent Companyin India (Not Only Through The Distributors ) And Company Must Provide Its Trained Technical Person For Each Implantation When Ever Required And Forfollow Up Programming When It Is Required ? Company Must Provide At Least One Programmer Exclusively To The Cardiology Dept. ? Company Must Quote Only The Latest Model Of Devices Commercially Available , Dcgiapproved, Vvi Permanent Pacemaker Without Lead ? Vvi ? All Single Chamber Modes And Basic Pacingprogrammable Parameters ? Should Have All Parameters Shown In Related Group Of Pacemaker ? Life Term Replacement Warranty ? Direct Presence Of Parent Companyin India (Not Only Through The Distributors ) And Company Must Provide Its Trained Technical Person For Each Implantation When Ever Required And Forfollow Up Programming When It Is Required ? Company Must Provide At Least One Programmer Exclusively To The Cardiology Dept. ? Company Must Quote Only The Latest Model Of Devices Commercially Available , Us Fda/Ce Approved, Vvirpermanent Pacemaker Without Lead ? Vvir ? All Single Chamber Modes And Basic Pacingprogrammable Parameters ? Should Have All Parameters Shown In Related Group Of Pacemaker ? Life Term Replacement Warranty ? Direct Presence Of Parent Companyin India (Not Only Through The Distributors ) And Company Must Provide Its Trained Technical Person For Each Implantation When Ever Required And Forfollow Up Programming When It Is Required ? Company Must Provide At Least One Programmer Exclusively To The Cardiology Dept. ? Company Must Quote Only The Latest Model Of Devices Commercially Available , Dcgiapproved, Vvirpermanent Pacemaker Without Lead Vvir ? All Single Chamber Modes And Basic Pacingprogrammable Parameters ? Should Have All Parameters Shown In Related Group Of Pacemaker ? Life Term Replacement Warranty ? Direct Presence Of Parent Companyin India (Not Only Through The Distributors ) And Company Must Provide Its Trained Technical Person For Each Implantation When Ever Required And Forfollow Up Programming When It Is Required ? Company Must Provide At Least One Programmer Exclusively To The Cardiology Dept. ? Company Must Quote Only The Latest Model Of Devices Commercially Available , Us Fda/Ce Approved, Vvirpermanent Pacemaker Without Lead ? Dddr ? Mri Compatible ? Life Term Replacement Warranty ? Direct Presence Of Parent Companyin India (Not Only Through The Distributors ) And Company Must Provide Its Trained Technical Person For Each Implantation When Ever Required And Forfollow Up Programming When It Is Required ? Company Must Provide At Least One Programmer Exclusively To The Cardiology Dept. ? Company Must Quote Only The Latest Model Of Devices Commercially Available , Dcgiapproved, Vvirpermanent Pacemaker Without Lead ?Dddr ? Mri Compatible ? Life Term Replacement Warranty ? Direct Presence Of Parent Companyin India (Not Only Through The Distributors ) And Company Must Provide Its Trained Technical Person For Each Implantation When Ever Required And Forfollow Up Programming When It Is Required ? Company Must Provide At Least One Programmer Exclusively To The Cardiology Dept. ? Company Must Quote Only The Latest Model Of Devices Commercially Available , Us Fda/Ce Approved, Atrial, Rv. Lv Leads And All Accessories For Biventricular Pacemaker (Crt) A Atrial Lead B Rv Lead C Lv Lead Should Have All Parameters Shown In Related Group Of Pacemaker Direct Presence Of Parent Companyin India (Not Only Through The Distributors ) And Company Must Provide Its Trained Technical Person For Each Implantation When Ever Required And Forfollow Up Programming When It Is Required Company Must Provide At Least One Programmer Exclusively To The Cardiology Dept. Company Must Quote Only The Latest Model Of Devices Commercially Available , Dcgi Approved, Atrial, Rv. Lv Leads And All Accessories For Biventricular Pacemaker (Crt) ? A Atrial Lead ? B Rv Lead ? C Lv Lead ? Should Have All Parameters Shown In Related Group Of Pacemaker ? Direct Presence Of Parent Companyin India (Not Only Through The Distributors ) And Company Must Provide Its Trained Technical Person For Each Implantation When Ever Required And Forfollow Up Programming When It Is Required ? Company Must Provide At Least One Programmer Exclusively To The Cardiology Dept. ? Company Must Quote Only The Latest Model Of Devices Commercially Available , Us Fda/Ce Approved, Rv Lead For Aicd Single Chamber ? Must Have All Specifications Shown In Related Group Of Pacemaker ? Rv Lead For Aicd Single Chamber ? Direct Presence Of Parent Companyin India (Not Only Through The Distributors ) And Company Must Provide Its Trained Technical Person For Each Implantation When Ever Required And Forfollow Up Programming When It Is Required ? Company Must Provide At Least One Programmer Exclusively To The Cardiology Dept. , Dcgiapproved, Rv Lead For Aicd Single Chamber ? Must Have All Specifications Shown In Related Group Of Pacemaker ? Rv Lead For Aicd Single Chamber ? Direct Presence Of Parent Companyin India (Not Only Through The Distributors ) And Company Must Provide Its Trained Technical Person For Each Implantation When Ever Required And Forfollow Up Programming When It Is Required ? Company Must Provide At Least One Programmer Exclusively To The Cardiology Dept. ? Company Must Quote Only The Latest Model Of Devices Commercially Available , Us Fda/Ce Approved, Pacing Leads For Aicd Dualchamber ? Must Have All Specifications Shown In Related Group Of Pacemaker ? Direct Presence Of Parent Companyin India (Not Only Through The Distributors ) And Company Must Provide Its Trained Technical Person For Each Implantation When Ever Required And Forfollow Up Programming When It Is Required ? Company Must Provide At Least One Programmer Exclusively To The Cardiology Dept. Company Must Quote Only The Latest Model Of Devices Commercially Available , Dcgiapproved, Pacing Leads For Aicd Dualchamber ? Must Have All Specifications Shown In Related Group Of Pacemaker ? Direct Presence Of Parent Companyin India (Not Only Through The Distributors ) And Company Must Provide Its Trained Technical Person For Each Implantation When Ever Required And Forfollow Up Programming When It Is Required ? Company Must Provide At Least One Programmer Exclusively To The Cardiology Dept. ? Company Must Quote Only The Latest Model Of Devices Commercially Available , Us Fda/Ce Approved, Pacing Lead (Atrial And Ventricular) For Dddr Permanent Pacemaker Aatrial Lead Bventricular Lead ? Must Have All Specifications Shown In Related Group Of Pacemaker ? Direct Presence Of Parent Companyin India (Not Only Through The Distributors ) And Company Must Provide Its Trained Technical Person For Each Implantation When Ever Required And Forfollow Up Programming When It Is Required ? Company Must Provide At Least One Programmer Exclusively To The Cardiology Dept. Company Must Quote Only The Latest Model Of Devices Commercially Available. Company Must Quote Only The Latest Model Of Devices Commercially Available , Dcgiapproved, Pacing Lead (Atrial And Ventricular) For Dddr Permanent Pacemaker Aatrial Lead Bventricular Lead ? Must Have All Specifications Shown In Related Group Of Pacemaker ? Direct Presence Of Parent Companyin India (Not Only Through The Distributors ) And Company Must Provide Its Trained Technical Person For Each Implantation When Ever Required And Forfollow Up Programming When It Is Required ? Company Must Provide At Least One Programmer Exclusively To The Cardiology Dept. ? Company Must Quote Only The Latest Model Of Devices Commercially Available , Us Fda/Ce Approved, Pacing Lead (Atrial And Ventricular) For Ddd Permanent Pacemakera Aatrial Lead Bventricular Lead ? Must Have All Specifications Shown In Related Group Of Pacemaker ? Direct Presence Of Parent Companyin India (Not Only Through The Distributors ) And Company Must Provide Its Trained Technical Person For Each Implantation When Ever Required And Forfollow Up Programming When It Is Required ? Company Must Provide At Least One Programmer Exclusively To The Cardiology Dept. ? Company Must Quote Only The Latest Model Of Devices Commercially Available , Dcgiapproved, Pacing Lead (Atrial And Ventricular) For Ddd Permanent Pacemaker Aatrial Lead Bventricular Lead ? Must Have All Specifications Shown In Related Group Of Pacemaker ? Direct Presence Of Parent Companyin India (Not Only Through The Distributors ) And Company Must Provide Its Trained Technical Person For Each Implantation When Ever Required And Forfollow Up Programming When It Is Required ? Company Must Provide At Least One Programmer Exclusively To The Cardiology Dept. ? Company Must Quote Only The Latest Model Of Devices Commercially Available , Us Fda/Ce Approved, Pacing Leads For Vdd/Vddr Pacemakers Must Have All Specifications Shown In Related Group Of Pacemaker ? Direct Presence Of Parent Companyin India (Not Only Through The Distributors ) And Company Must Provide Its Trained Technical Person For Each Implantation When Ever Required And Forfollow Up Programming When It Is Required ? Company Must Provide At Least One Programmer Exclusively To The Cardiology Dept. Company Must Quote Only The Latest Model Of Devices Commercially Available , Dcgiapproved, Pacing Leads For Vdd/Vddr Pacemakers ? Must Have All Specifications Shown In Related Group Of Pacemaker ? Direct Presence Of Parent Companyin India (Not Only Through The Distributors ) And Company Must Provide Its Trained Technical Person For Each Implantation When Ever Required And Forfollow Up Programming When It Is Required ? Company Must Provide At Least One Programmer Exclusively To The Cardiology Dept. ? Company Must Quote Only The Latest Model Of Devices Commercially Available , Usfda/Ceapproved, Pacing Leads For Vvi/Vvir Pacemakers ? Must Have All Specifications Shown In Related Group Of Pacemaker ? Direct Presence Of Parent Companyin India (Not Only Through The Distributors ) And Company Must Provide Its Trained Technical Person For Each Implantation When Ever Required And Forfollow Up Programming When It Is Required ? Company Must Provide At Least One Programmer Exclusively To The Cardiology Dept. Company Must Quote Only The Latest Model Of Devices Commercially Available. , Dcgiapproved, Pacing Leads For Vvi/Vvir Pacemakers ? Must Have All Specifications Shown In Related Group Of Pacemaker ? Direct Presence Of Parent Companyin India (Not Only Through The Distributors ) And Company Must Provide Its Trained Technical Person For Each Implantation When Ever Required And Forfollow Up Programming When It Is Required ? Company Must Provide At Least One Programmer Exclusively To The Cardiology Dept. ? Company Must Quote Only The Latest Model Of Devices Commercially Available. , Lead For Dddr Pacemaker – Ra Lead -Dcgi&Us Fda/ Ce Approved , Lead For Dddr Pacemaker – Ra Lead -Dcgi&Us Fda/ Ce Approved , Lead For Dddr Pacemaker – Rv Lead -Dcgi&Us Fda/ Ce Approved , Lead For Ddd Pacemaker – Ra Lead - Dcgi&Us Fda/ Ce Approved , Lead For Dddr Pacemaker – Rv Lead - Dcgi&Us Fda/ Ce Approved , Lead For Vdd Pacemaker – Dcgi Approved & Us Fda/ Ce Approved , Lead For Icdpacemaker – Dcgi & Us Fda/ Ce Approved , Lead For Icddual Chamberpacemaker - Dcgi&Us Fda/ Ce Approved , Lead For Crtpacemaker –Ra Lead Dcgi&Us Fda/ Ce Approved , Lead For Crtpacemaker –Rv Lead Dcgi&Us Fda/ Ce Approved , Lead For Crtpacemaker –Lvlead Dcgi&Us Fda/ Ce Approved , Lead For Crtdpacemaker –Rvlead Dcgi&Us Fda/ Ce Approved , Lead For Crtdpacemaker –Ralead Dcgi&Us Fda/ Ce Approved , Lead For Crtdpacemaker –Lvlead -Dcgi&Us Fda/ Ce Approved , Epicardial Pacing Lead – Rv Lead , Epicardial Pacing Lead – Ra Lead , Latex Surgical Gloves (Powdered) – Thickness -0.135 Mm • Natural Rubber Latex , Beaded Cuff, Protein Content Level: <200?G/Dm2 (As Per Astm D 5712) • Size – 6. 6.5, 7, 7.5, 8 , Latex Surgical Gloves (Powder Free) – Thickness -0.135 Mm • Natural Rubber Latex , Beaded Cuff, Protein Content Level: <50?G/Dm2 (As Per Astm D 5712) • Size – 6. 6.5, 7, 7.5, 8 , Silicon Coated Directly Jointed Sus & Sitinol Shaft Wire 0.7 Gm, Duo Core Technology – Ce Approved , Silicon Coated Directly Jointed Sus & Sitinol Shaft Wire – 0.7 Gm - Duo Core Technology Dcgi Approved , Silicon Coated Directly Jointed Sus & Sitinol Shaft Intermediate Wire 1 Gm,Duo Core Technology – Ce Approved , Silicon Coated Directly Jointed Sus & Sitinol Shaft Intermediate Wire – 1 Gm -Duo Core Technology Dcgi Approved , Stainless Steel Grinded, Core Wire,One Core Construction,Platinum Tip (3 Cm)- 195 Cm,Standard / 1.2 Gf, Intermediate / 1.0 Gf, Floppy / 0.8 Gf, Extra Floppy / 0.6 Gf – Ce Approved , Stainless Steel Grinded, Core Wire,One Core Construction,Platinum Tip (3 Cm)- 195 Cm,Standard / 1.2 Gf, Intermediate / 1.0 Gf Floppy / 0.8 Gf, Extra Floppy / 0.6 Gf – Dcgi Approved , Nitinol Distal Core Wire -Unicore- Both Nitinol - Le And Multiple Stainless-Steel Conjugation - Ultra-Low (<0.7 G) – 3-6 Gm Cto Wire - Ce Approved , Nitinol Distal Core Wire – Unicore -Both Nitinol - Le And Multiple Stainless-Steel Conjugation - Ultra-Low (<0.7 G) – 3-6 Gm Cto Wire - Dcgi Approved , Controlled Vascular Lumen Expansion Regulator System – Ce Approved , Controlled Vascular Lumen Expansion Regulator System – Dcgi Approved , Post Vascular Intervention Coronary Cvi-Balloon Catheters - Semi Crystalline Polymer Pressure Limit – 14-20 , Pre Vascular Intervention Coronary Cvi-Balloon Catheters - Semi Crystalline Co-Polymer Eft Shaft Pressure Limit – 7-14 , Vascular Intervention Coronary Cvi Drug-Coated Balloon -Lux Coating Technologyblends Paclitaxel With Bthc , Group – B (Interventional Neurology) , Disposable Luer Lock Syringe • Should Be Compitable With Cuanoacrylate. • Should Be Available In 1 C.C/2C.C/3C.C/5C.C/10 C.C/20 C.C/ 50C.C , Picard Catheter • In Various Standard Lengths And Curves • 035-038 Compatible 100 Cm Long , Amplatz Catheter : • In Various Standard Lengths And Curves • 035-038 Compatible 100 Cm Long , Carotid Angiopalsty Balloon Catheter(Over The Wire/Rapid Exchange) • Should Have Hydrophilic Coating • Should Be Available In Various Outer Diameters And Balloon Lengths And Various Shaft Lengths , Carotid Self Expendable Stents • Should Be 0.018” Compatible • Should Be Over The Wire And Rapid Exchange (Otw/Rx) • Should Be Available In Various Diameters And Length • Should Be On A Shaft Length Of 80-140 Or Above Length , Poly Vinyl Alcohol (Pva) Particles For Pre-Operative Tumour Embolization , Ethyl Vinyl Alcohol Embolic Agent (With Dmso) For Avms/Avfs/Davfs/Tumor-Embolization , Super Selective High Flow Infusion Catheters - For Cerebral/ Spinal Avms (Compitable With Dmso) Outer Diameter 2.7/1.5F, Distal Id- 0.013”, Usable Length At Least 165 Cm, , Super Selective High Flow Infusion Catheters - For Cerebral/ Spinal Avms (Compitable With Particulate Embolic Agents Such As Pva Particles) , Distal Acess Catheter For Co-Axial Systems • In Various Standerd Length • Size5fr 6Fr 7Fr • 0.035 To 0.070, 0.074 Inner Lumen , Baloon Topped Guiding Catheter • Size 6Fr 7Fr 8Fr 9Fr 10Rf , Special Micro Guidwire With Torque Device For Use With Micro Catheters • Size 0.007” – 0.014” , Special Micro Guidwire (Exchange Length 260-300Cm)With Torque Device For Use With Micro Catheterssize 0.010” – 0.014” , Electrolyte Detachable 3-D Type / Halical / 360 Coils For Intracranial Aneurysm Treatment – Bare Platinum Coils , Electrolyte Detachable 3-D Type / Halical / 360 Coils For Intracranial Aneurysm Treatment – Coated / Bio Active Platinum Coils , Selective Infusion Microcatheter For Intrecranial Aneurysm Treatment With 2 Tip Markers • Outer Diameter 2.1/1.7F And Id. 0.017” , Selective Infusion Microcatheter For Deploynig Intracranial Device Should Be Compitable For Stents Flow Diverters Or Stent Retrivers Of Various Sizes , Power Supply Acessiries And Connecting Cables For Detachable Coils , Open Cell Design Intracranial Stents For Stent Assisted Coilling Of Aneurysn • Should Have Open Cell Design • Should Be Available In Various Size And Diameter , Flow Diverter For Intracranial Aneurism Treatment , Single Lumen Baloon Angioplasty Catheter For Intrecranial Use , Hybrid Cell Design Intracranial Stents For Sten Assisted Coilleng Of Aneurusm • Should Have Open Cell Design • Should Be Available In Various Size And Diameter , Revasculization Device For Mechenical Thrombectomy , Thrombus Suction Catheters For Clot Retrivals From Carotid And Vertibtals , Infusion Catheter For Moterised Fragmentation And Suction For Clot Retrival With Seperater , Stent Retrival For Thrombectomy , Web Device Intraspecular – Available Assorted Size , Pressure Saline Bag 1000Ml , Pressure Infusion Reusable Bag 1000Ml

Corrigendum

Sr No Corrigendum Date Corrigendum Type New Submission Date
1 28-Jul-2025 Corrigendum Other 11-Aug-2025
2 28-Jul-2025 Corrigendum Financial Bid 11-Aug-2025
3 07-Aug-2025 Corrigendum Date 14-Aug-2025

BOQ

Name of Work: FOR THE PROCUREMENT of Drug Eluting Stents, Pacemakerss,, PTMC Balloon, and other Consumable Items for Cardiology & Intervention Neurology Department
Sl. No. Item Description
1Drug Eluting Stents, Pacemakers, PTMC Balloon and other Consumable Items
2Group – A (Interventional Cardiology)
3RADIAL INTRODUCER NEEDLE18G, 70MM LENGTH & 20G, 40MM – USFDA/CE/DCGI ApprovedTip- Sharp Half-moon Bevel shape diamond cutting. 18 G 7 cm 20G 4 cm.
4IV CANULA - 20G, /21G 3.2 CM AND 4 CM – USFDA/CE/DCGI APPROVEDUltrasharp electropolished pointed tip. thin-walled construction, radiopaque in nature cannula made up of clear polyurethane. Hub shape Round mini wings/no wings with flash plug. 20G,21G 3.2 cm and 4 cm
5TRANS RADIAL INTRODUCER KIT WITH PUNCTURE NEEDLE - 4F-7F – 7/10/15/25 CM, USFDA/PMDA APPROVEDSizes - 4 – 7 French, Length – 7/10/15/25 cmPack must include 20 G/45mm entry needle, 0.025-inch x 45/80 cm hydrophilic mini guidewire.Must have ETFE sheath tubing, dilator tube should be made up of polypropylene and should have silicon coating.Should Contain haemostatic crosscut valve to prevent back leak of blood and aspiration of air; With Integrated side arm with attached 3-way stopcock.With suture eye for securing sheath, Kink resistant, With Snap-on dilator-hub lock mechanism to prevent its back-out.
6TRANS RADIAL INTRODUCER KIT WITH PUNCTURE NEEDLE - 4F-7F – 7/10/15/25 CM, CE/DCGI APPROVEDSizes - 4 – 7 French, Length – 7/10/15/25 cmPack must include 20 G/45mm entry needle, 0.025-inch x 45/80 cm hydrophilic mini guidewireMust have ETFE sheath tubing, dilator tube should be made up of polypropylene and should have silicon coating.Should Contain haemostatic crosscut valve to prevent back leak of blood and aspiration of air; With Integrated side arm with attached 3-way stopcock.With suture eye for securing sheath, Kink resistant, With Snap-on dilator-hub lock mechanism to prevent its back-out.
7RADIAL INTRODUCER KIT - HYDROPHILIC CTO APPROACHABLE SLENDER PROFILE 4F-7F, 6.5F -Length - 7 cm,11cm, 15cm, 25cm – CE ApprovedSizes - 4 – 7 French. Must include 6.5F special sheath, Length - 7 cm, 11cm, 15cm, 25cm.Pack must include 22G/45mm plastic entry needle, 0.025-inch x 45/80 cm hydrophilic mini guidewire.Must Have Metal Mesh Braided StructureMust have 3 Layer sandwich of PTFE sheath tubing with Pebax inner layer and SS Braid, dilator tube should be made up of polypropylene and should have silicon coating.Should Contain haemostatic crossover valve to prevent back leak of blood and aspiration of air; With Integrated side arm with attached 3-way stopcock.With suture eye for securing sheath, Kink resistant, With Rotation-hub lock mechanism to prevent its back-out during insertion
8SLENDER PROFILE HYDROPHILIC SHEATH 5-7 F (10, 16, CM) - USFDA/PMDA ApprovedMust Have unique thin wall technology reducing the outer diameter by 1 Fr size whilst maintaining the one size lager inner diameter. 5Fr in 4, 6Fr in 5, 7Fr in 6 profile. Must Have 7Fr Sheath with Outer diameter of 2.8mm, 6Fr with OD of 2.46 mm & 5Fr with OD of 2.13mm.hydrophilic M coating with 20/21G Surflash needle and TIF tip technology which provide optimal tapering design.
9FEMORAL INTRODUCER KIT 4-11F (10, 16 & 25 CM) - USFDA/PMDA APPROVED• Sizes - 4 – 11 French, Length – 10, 16 & 25 cm • Pack must include 18 G/20G, Surflash entry needle, 0.035- or 0.025-inch x 45 cm mini plastic guidewire• Must have ETFE sheath tubing, dilator tube should be made up of polypropylene and should have silicon coating.• Should Contain haemostatic crosscut valve to prevent back leak of blood and aspiration of air; With Integrated side arm with attached 3-way stopcock. • With suture eye for securing sheath, Kink resistant, With Snap-on dilator-hub lock mechanism to prevent its back-out during insertion
10FEMORAL INTRODUCER KIT 4-11F (10, 16 & 25 CM) – CE/DCGI APPROVEDSizes - 4 – 11 French, Length – 10, 16 & 25 cmPack must include 18 G/20G, Surflash entry needle, 0.035- or 0.025-inch x 45 cm mini plastic guidewireMust have ETFE sheath tubing, dilator tube should be made up of polypropylene and should have silicon coating.Should Contain haemostatic crosscut valve to prevent back leak of blood and aspiration of air; With Integrated side arm with attached 3-way stopcock.With suture eye for securing sheath, Kink resistant, With Snap-on dilator-hub lock mechanism to prevent its back-out during insertion
11FEMORAL INTRODUCER KIT - HYDROPHILIC CTO APPROACHABLE SLENDER PROFILE 4F-18F, Length - 11cm,15cm, 25cm – CE ApprovedSizes - 4 – 18 French. Length - 11cm, 15cm, 25cmPack must include 18G/70 mm plastic entry needle, 0.038-inch x 45/80 cm & .035 for 4F hydrophilic mini guidewire.Must Have Metal Mesh Braided StructureMust have 3 Layer sandwich of PTFE sheath tubing with Pebax inner layer and SS Braid, dilator tube should be made up of polypropylene and should have silicon coating.Should Contain haemostatic crossover valve to prevent back leak of blood and aspiration of air; With Integrated side arm with attached 3-way stopcock.With suture eye for securing sheath, Kink resistant, With Rotation-hub lock mechanism to prevent its back-out during insertion
12BRAIDED LONG SHEATH – 6-8F – 45CM - USFDA/PMDA APPROVEDDiameter 6,7,8F and length 45cm. Atraumatic Tip for Carotid & Distal proceduresHaemostatic Valves (Cross Cut Valve & TBV- detachable valves for thrombus management)Gold Coil Marker - For Distal VisibilityPTFE Coating - Seamless Device Transition, Distal Hydrophilic Coated for navigabilityNylon Outer Layer with reinforced stainless-steel coil - Helps in Smooth & Anti-Kink effect
13BRAIDED LONG SHEATH – 6-8F – 45CM – CE/DCGI APPROVEDDiameter 6,7,8F and length 45cm. Atraumatic Tip for Carotid & Distal proceduresHaemostatic Valves (Cross Cut Valve & TBV- detachable valves for thrombus management)Gold Coil Marker - For Distal VisibilityPTFE Coating - Seamless Device Transition, Distal Hydrophilic Coated for navigabilityNylon Outer Layer with reinforced stainless-steel coil - Helps in Smooth & Anti-Kink effect
14BRAIDED LONG SHEATH – 6-8F – 65CM - USFDA/PMDA APPROVEDDiameter 6,7,8F and length 65cm. Atraumatic Tip for Carotid & Distal proceduresHaemostatic Valves (Cross Cut Valve & TBV- detachable valves for thrombus management)Gold Coil Marker - For Distal VisibilityPTFE Coating - Seamless Device Transition, Distal Hydrophilic Coated for navigabilityNylon Outer Layer with reinforced stainless-steel coil - Helps in Smooth & Anti-Kink effect
15BRAIDED LONG SHEATH – 6-8F – 65CM – CE/DCGI APPROVEDDiameter 6,7,8F and length 65cm. Atraumatic Tip for Carotid & Distal procedures• Haemostatic Valves (Cross Cut Valve & TBV- detachable valves for thrombus management)• Gold Coil Marker - For Distal Visibility• PTFE Coating - Seamless Device Transition, Distal Hydrophilic Coated for navigability• Nylon Outer Layer with reinforced stainless-steel coil - Helps in Smooth & Anti-Kink effect
16BRAIDED LONG SHEATH – 6-8F – 90CM - USFDA/PMDA APPROVEDDiameter 6,7,8F and length 90cm. Atraumatic Tip for Carotid & Distal proceduresHaemostatic Valves (Cross Cut Valve & TBV- detachable valves for thrombus management)Gold Coil Marker - For Distal VisibilityPTFE Coating - Seamless Device Transition, Distal Hydrophilic Coated for navigabilityNylon Outer Layer with reinforced stainless-steel coil - Helps in Smooth & Anti-Kink effect
17BRAIDED LONG SHEATH – 6-8F – 90CM – CE/DCGI APPROVEDDiameter 6,7,8F and length 90cm. Atraumatic Tip for Carotid & Distal proceduresHaemostatic Valves (Cross Cut Valve & TBV- detachable valves for thrombus management)Gold Coil Marker - For Distal VisibilityPTFE Coating - Seamless Device Transition, Distal Hydrophilic Coated for navigabilityNylon Outer Layer with reinforced stainless-steel coil - Helps in Smooth & Anti-Kink effect
18BRAIDED LONG SHEATH – 8-18F – ALL LENGTH – CE/DCGI APPROVEDDiameter 8-18F and all length. Atraumatic Tip for Carotid & Distal proceduresHaemostatic Valves (Cross Cut Valve & TBV- detachable valves for thrombus management)Gold Coil Marker - For Distal VisibilityPTFE Coating - Seamless Device Transition, Distal Hydrophilic Coated for navigabilityNylon Outer Layer with reinforced stainless-steel coil - Helps in Smooth & Anti-Kink effect
19HYDROPHILIC GUIDEWIRE (LENGTH - 150) WITH MCOAT/HYDROCOAT TECHNOLOGY – PMDA/CE APPROVEDStandard tip & .035, .032, .038, .025. .018 diameter & 150 cm length - Straight / Angled / 1.5mm J shapetapered tip, single Nitinol core alloy, Tungsten-infused polyurethane jackethydrophilic polymer coat. One piece construction & Radiopaque polyurethane jacket.
20HYDROPHILIC GUIDEWIRE (LENGTH - 150) WITH MCOAT/HYDROCOAT TECHNOLOGY – DCGI APPROVEDStandard tip & .035, .032, .038, .025. .018 diameter & 120 cm & 150 & 180 cm length - Straight / Angled / 1.5mm J shape, straight A, S, R-1.5mmJ, R-3mmJ in Standard and stiff support leveltapered tip, single Nitinol core alloy, Tungsten-infused polyurethane jackethydrophilic polymer coat. One piece construction & Radiopaque polyurethane jacket.
21HYDROPHILIC GUIDEWIRE (LENGTH - 180) WITH MCOAT/HYDROCOAT TECHNOLOGY – PMDA/CE APPROVEDStandard tip & .035, .032, .038, .025. .018 diameter & 180 cm length - Straight / Angledtapered tip, single Nitinol core alloy, Tungsten-infused polyurethane jackethydrophilic polymer coat. One piece construction & Radiopaque polyurethane jacket.
22HYDROPHILIC GUIDEWIRE (LENGTH - 260) WITH MCOAT/HYDROCOAT TECHNOLOGY – PMDA/CE APPROVEDStandard tip & .035, .032, .038, .025. .018 diameter & 260 cm length - Straight / Angledtapered tip, single Nitinol core alloy, Tungsten-infused polyurethane jackethydrophilic polymer coat. One piece construction & Radiopaque polyurethane jacket.
23HYDROPHILIC GUIDEWIRE (220 & 260) WITH MCOAT/HYDROCOAT TECHNOLOGY – DCGI APPROVED• Standard tip & .035, .032, .038, .025. .018 diameter & 220 cm & 260 cm length - Straight / Angled / 1.5mm J shape, straight A, S, R-1.5mmJ, R-3mmJ in Standard and stiff support level• tapered tip, single Nitinol core alloy, Tungsten-infused polyurethane jacket• hydrophilic polymer coat. One piece construction & Radiopaque polyurethane jacket.
24EXTRA STIFF - HYDROPHILIC GUIDEWIRE -150 CM USFDA/PMDA APPROVED• 0.035, .032, .038, .025, .018 diameter and 150 cm length - Straight / Angled -Half Stiff and stiff, Extra Stiff• with Mcoat technology tapered tip, single Nitinol core alloy, Tungsten-infused polyurethane jacket• hydrophilic polymer coat. One piece construction & Radiopaque polyurethane jacket.
25EXTRA STIFF - HYDROPHILIC GUIDEWIRE -260 CM USFDA/PMDA APPROVED• 0.035, .032, .038, .025, .018 diameter and 150 cm length - Straight / Angled -Half Stiff and stiff, Extra Stiff• with Mcoat technology tapered tip, single Nitinol core alloy, Tungsten-infused polyurethane jacket• hydrophilic polymer coat. One piece construction & Radiopaque polyurethane jacket.
26PTFE GUIDEWIRE 150 CM - USFDA/PMDA APPROVED150cm, 175 cm of lengths & 0.018\"\" to 0.038\"\" diameter With Silicon Coated tip.Silicon Coated Tip with choice of Stainless-steel core or Nitinol core,Should be available fixed as well as movable core.
27PTFE GUIDE WIRE – 150 CM – CE/DCGI APPROVEDShould be available in 0.025, 0.032, 0.035 & 0.038 inches, 150 cm long, straight & J-Shaped tipShould be available in variable lengths of flexible/floppy end, variable J tip sizesShould be available fixed as well as movable core.
28PTFE GUIDEWIRE – 260 CM - USFDA/PMDA APPROVED260 cm of lengths & 0.018\"\" to 0.038\"\" diameter With Silicon Coated tip.Silicon Coated Tip with choice of Stainless-steel core or Nitinol core,Should be available fixed as well as movable core.
29PTFE GUIDE WIRE – 260 CM – CE/DCGI APPROVEDShould be available in 0.025, 0.032, 0.035 & 0.038 inches, 150 cm long, straight & J-Shaped tipShould be available in variable lengths of flexible/floppy end, variable J tip sizesShould be available fixed as well as movable core.
30AMPLATZ SUPER-STIFF GUIDE WIRE - 260 – USFDA/CE/DCGI APPROVEDShould be available in 0.035- and 0.038-inches size, 260/300 cm long, straight or J-Shaped tipShould be available fixed as well as movable core.
31DOUBLE CURVE EXTRA STIFF GUIDE WIRE – LANDERQUIST TYPE – REGULAR LENGTH
32DOUBLE CURVE EXTRA STIFF GUIDE WIRE – LANDERQUIST TYPE – 260CM/300CM
33PRE-SHAPED – TAVI SUPPORT WIRE – USFDA APPROVEDOuter Diameter: 0.035” (0.889 mm), Length: 275 cmCore Material: Stainless Steel with LUBRIGREE PTFE coatingUnique Product Dimensions by Curve Size - Extra Small, Small, Large Curve
34RADIAL ANGIOGRAPHIC CATHETER – TIG CURVE (4-6F) - USFDA/PMDA -APPROVEDSizes - 4F, 5F, 6F, Shapes - TIG/3.5 JACKY/4-SARAHTwo-layer construction, double braided stainless-steel two-ply mesh sandwiched between layers of polyurethane and polyamide elastomers.Must Have the shaft inner layer and outer layer contain barium sulphate with 32 Strands of stainless-steel braidMust Have anti-kinking protector sleeve, with non-braided tip shaft (distal -2 cm).Must have inner diameter of 4F = 1.03mm, 5F= 1.20mm, 6F = 1.30mm
35RADIAL ANGIOGRAPHIC CATHETER HYDROPHILIC – TIG CURVE (4-6F) - DCGI APPROVEDLength - 80cm / 100cm / 110cm / 130cm, Sizes - 4F, 5F, 6FMust Have triple-layer construction, double braided stainless-steel two-ply mesh sandwiched between layers of Nylon and Pebax.Must Have anti-kinking protector sleeve, with uncoated non-braided tip shaft (distal -2 cm)Must have inner diameter of 4F = 1.05mm, 5F= 1.20mm, 6F = 1.47mm with 1000psi flow rate.
36RADIAL ANGIOGRAPHIC CATHETER HYDROPHILIC – TIG CURVE (4-6F) - DCGI APPROVEDLength - 80cm / 100cm / 110cm / 130cm, Sizes - 4F, 5F, 6FMust Have triple-layer construction, double braided stainless-steel two-ply mesh sandwiched between layers of Nylon and Pebax.Must Have anti-kinking protector sleeve, with uncoated non-braided tip shaft (distal -2 cm)Must have inner diameter of 4F = 1.05mm, 5F= 1.20mm, 6F = 1.47mm with 1000psi flow rate.
37FEMORAL DIAGNOSTIC CATHETER: 4 -6 FR (JL, JR, AL, AR, PIGTAIL) - CE APPROVED Shapes - JL, JR, AL, AR,pigtail Triple-layer construction, double braided stainless-steel two-ply mesh sandwiched between layers of Nylon and Pebax. Inner diameter of 4F = 1.04mm, 5F= 1.20mm, 6F = 1.47mm with 1000psi flow rate. Catheter should have slender profile ultra-thin wall that creates large lumen. Catheter should have anti-kinking protector, with uncoated non-braided tip shaft (distal -2 cm).
38FEMORAL DIAGNOSTIC CATHETER: 4 -6 FR (JL, JR, AL, AR, IM, PIGTAIL, MP) - USFDA/PMDA -APPROVEDTransfemoral catheter shapes JL, JR, AL, AR, IM, Pigtail, MPbraided Catheter with stainless steel mesh technology.Inner diameter of 4Fr =1.03mm ,5Fr = 1.20mm, 6Fr = 1.30mm or more resulting in Higher flow rates.The shaft inner layer and outer layer should contain BARIUM SULPHATE with 32 Strands of stainless-steel braidCatheter should have ultra-thin wall that creates large lumen.Catheter should have anti-kinking protector, with non-braided tip shaft (distal -2 cm).
39JUDKINS CATHETER (JR & JL) – 4 – 6 FRSize - 4 French/5 French /6 French size
40AMPLATZ CATHETER – AL & AR – 4 6 FRSize - 4 French/5 French /6 French
41MULTIPURPOSE CATHETER (MP) 4-6 FRSize - 4 French/5 French /6 French size
42PIGTAIL CATHETER – 4 -6 FRSize – 4 – 6 French
43ANGIOGRAPHIC SIZING PIGTAIL CATHETER 5F/ 6F/ 7F –SIZE – 5 F – 7 F
44INTERNAL MAMMARY CATHETER – 4 -6 FRSize - 4 French/5 French /6 French in various standard curves and lengths.
45BY-PASS GRAFT CATHETERSize - 4 French/5 French /6 French in various standard curves and lengths.
46NIH CATHETER -4 French/5 French /6 French/7 French/8French in various standard curves and lengths.
47COURNARD CATHETER4 French/5 French /6 French/7 French/8French in various standard curves and lengths.
48DIAGNOSTIC CATHETERS FOR NEONATAL USE - 3- ‘FRENCH’Pigtail, Judkins, Multipurpose, Cobra and other diagnostic catheters of 3 Fr. sizeVarying lengths and shapes
49DRUG DELIVERY/INFUSION CATHETER
50CORONARY PROBING CATHETER
51CORONARY PERFUSION CATHETER
52CORONARY TRAPEER CATHETER
53SWAN GANZ CATHETER - US FDA APPROVED- 6F/7F
54SWAN GANZ CATHETER – CE/DCGI APPROVED- 6F/7F
55SPECIAL SWAN GANZ CATHETERSizes - 4F, 5F, 6F and 7F and 8 Fr4 F catheter should allow the passage of at least 0.021, 5 F – 0.025, 6 F – 0.035 and 7 F, 8F – 0.038-inch hydrophilic guide wire Catheter should be tapered at tip to ensure uniform diameter of the whole catheter, 10 cm marking along the catheter body.
56BALLOON TIPPED ANGIOGRAPHY CATHETER
57BERMAN CATHETERMust be available in 4F, 5F, 6F and 7F sizesShould have 6-8 holes proximal to the balloon for dye injectionCatheter should be tapered at tip to ensure uniform diameter of the whole catheter, 10 cm marking along catheter
58REVERSE BERMAN CATHETERShould be available in 4F, 5F, 6F & 7F sizesCatheter should be tapered at tip to ensure uniform diameter of the whole catheterShould have holes proximal to the balloon for dye injectionShould have a hole at the proximal tip to allow the passage over the wire
59PIGTAIL CATHETER (PEDIATRIC)Sizes 3 French/ 4 French/ 5 French/ 6 FrenchSmaller length for neonatal and pediatric use
60SPECIAL JUDKINS CORONARY CATHETER WITH 2.5 CM CURVE (PEDIATRIC)Sizes - 4 F/ 5 F/ 6 F
61ANGIOGRAPHIC DOUBLE LEUMEN TRACKING CATHETER – 4 F/5F/ 6F
62RENAL DOUBLE CURVE CATHETERIn various standard lengths and curves
63HEAD HUNTER CATHETERIn various standard lengths and curves035-038 compatible100 cm long
64SIMMONS/ SIDEWINDER CATHETERIn various standard lengths and curves035-038 compatible100 cm long
65PRESHAPED CATHETER FOR UTERINE ARTERY EMBOLISATIONIn various standard lengths and curves
66VERTEBRAL CATHETERIn various standard lengths and curves
67COELIAC AXIS CATHETERIn various standard lengths and curves
68SHEPHERD’S HOOK CATHETERIn various standard lengths and curves
69VTK DIAGNOSTIC CATHETERIn various standard lengths and curves 5f, 6f size
703D SPACE RCA ANGIOGRAPHIC CATHETER
71ADJUSTABLE HEMOSTASIS VALVE FOR CATHETERS – USFDA ApprovedShould meet highest medical industrial standards click-onQuality certification should be provided from authorized agencies.
72ADJUSTABLE HEMOSTASIS VALVE FOR CATHETERS - CE APPROVEDShould meet highest medical industrial standardsQuality certification should be provided from authorized agencies.
73ADJUSTABLE HEMOSTASIS VALVE FOR CATHETERS - DCGI APPROVEDShould meet highest medical industrial standardsQuality certification should be provided from authorized agencies.
74HEMOSTASIS VALVE - 8 FR. INNER LUMEN – USFDA Approvedstar-shaped seal with Rotolock
75HEMOSTASIS VALVE - 8 FR. INNER LUMEN – CE Approved star-shaped seal with Rotolock
76HEMOSTASIS VALVE - 8 FR. INNER LUMEN – DCGI Approved star-shaped seal with Rotolock
77PTCA PRESSURE CONSOLE – USFDA APPROVED
78PTCA PRESSURE CONSOLE – CE APPROVED
79PTCA PRESSURE CONSOLE – DCGI APPROVED
80ANGIOPLASTY PRESSURE DIVERSION MODULE (DUAL-PATHWAY) – USFDA APPROVED
81ANGIOPLASTY PRESSURE DIVERSION MODULE (DUAL-PATHWAY) -CE APPROVED
82ANGIOPLASTY PRESSURE DIVERSION MODULE (DUAL-PATHWAY) -DCGI APPROVED
83ANGIOPLASTY PRESSURE DIVERSION MODULE (TRI-PATHWAY) – USFDA APPROVED
84ANGIOPLASTY PRESSURE DIVERSION MODULE (TRI-PATHWAY) – CE APPROVED
85ANGIOPLASTY PRESSURE DIVERSION MODULE (TRI-PATHWAY) – DCGI APPROVED
86HIGH – PRESURE INJECTOR LINES - DCGI APPROVED Should be available in various lengths Should have male and female luer locks Should be transparent and kink resistant Should be able to take high pressure of angiographic injections
87DISPOSABLE ECG ELECTRODES FOR ADULTS - US FDA APPROVED Adult diaphoretic foam electrodes. Should be pre-gelled, peel and stick electrode with excellent adhesion Should have no residue once removed Should conform to or exceed the highest industrial standard for ECG electrodes,ation
88SPECIAL RADIOLUCENT DISPOSABLE ECG ELECTODES FOR ADULTS – DCGI APPROVED Radiolucent electrodes for Electro-physiologic Studies Wet gel electrodes, Should be porous and breathable Should conform to or exceed the highest industrial standard for ECG electrodes, Quality certification from authorized agencies to be provided
89SYRINGE FOR PRESSURE INJECTOR INSTALLED IN CATH LAB Should be compatible with existing machines at Cath Lab, GMCK
90HIGH-PRESSURE – CONTRAST DELIVERY INJECTOR – WITH LUER LOCK MECHANISM- 10 ML
91HIGH-PRESSURE – CONTRAST DELIVERY INJECTOR – WITH LUER LOCK MECHANISM- 20 ML
92ARTERIAL PRESSURE MONITOR LINES (100, 150 & 200 cm long)Should be available in sizes of 100, 150 & 200 cmShould have male luer lock connection at one end and a female luer lock connection at the other end
93HIGH-FIDELITY PRESSURE MONITORING EXTENSION LINE – 200 medical-grade PVC or DEHP-free polyethylene, male and female Luer lock connectors, must be DEHP-free (Diethylhexyl Phthalate-free) and latex-free.Pressure ratings – 1200 PSI
94DISPOSABLE TRANSDUCERS FOR INVASIVE PRESSURE MONITORING COMPATIBLE WITH AVAILABLE SYSTEM IN CATH LAB IN GMCK HOSPITALDisposable transducers for invasive pressure monitoringShould be compatible with available system in Cath Lab (IABP – Data Scope & Cath Lab transducer) and ICCU at GMCKShould meet highest medical industrial standardsQuality certification should be provided form authorized agencies
95DOMES FOR TRANSDUCER FOR INVASIVE PRESSURE MONITORING - DCGI APPROVEDShould be compatible with existing available system at Cath Lab and CCU at GMCKShould meet or exceed highest standardsQuality certification from authorized agencies to be provided
96PTCA INFLATION DEVICE - US FDA APPROVEDEfficient locking system to maintain high pressureRapid inflation and deflation, Clear barrel for easy visualization of de-bubblingLuminescent analog pressure gauge (up to 30 atm), 20/30 Inflation Device registers pressures up to 30 atmospheresErgometric and use friendly hand held design.
97PTCA INFLATION DEVICE - CE APPROVEDEfficient locking system to maintain high pressureRapid inflation and deflation, Clear barrel for easy visualization of de-bubblingLuminescent analog pressure gauge (up to 30 atm),20/30 Inflation Device registers pressures up to 30 atmospheres Ergometric and use friendly hand held design.
98PTCA INFLATION DEVICE - DCGI APPROVEDEfficient locking system to maintain high pressureRapid inflation and deflation, Clear barrel for easy visualization of de-bubblingLuminescent analog pressure gauge (up to 30 atm), 20/30 Inflation Device registers pressures up to 30 atmospheresErgometric and use friendly hand held design.
99Y-CONNECTOR – PUSH PULL MECHANISM - US FDA/PMDA APPROVED9F Bore Size for usage with a variety of devicesShould accommodate virtually all interventional devicesLuer connector at the guiding catheter end, Rotating adapter at the guiding catheter endShould have bleed back safety mechanism, Stepwise control for open, semi-open and closed position
100Y-CONNECTOR– PUSH PULL MECHANISM – CE/DCGI APPROVED9F Bore Size for usage with a variety of devicesShould accommodate virtually all interventional devicesLuer connector at the guiding catheter end, Rotating adapter at the guiding catheter endShould have bleed back safety mechanism, Stepwise control for open, semi-open and closed position
101Y-CONNECTOR – PUSH CLICK MECHANISM –180 PSI PRESSURE SUSTENACE - DCGI APPROVED9F Bore Size for usage with a variety of devices, with 180 Psi of pressure sustenance.Should accommodate virtually all interventional devicesLuer connector at the guiding catheter end, Rotating adapter at the guiding catheter endShould have bleed back safety mechanism, Stepwise control for open, semi-open and closed position
102Y-CONNECTOR – PUSH CLICK MECHANISM - 300 PSI PRESSURE SUSTENACE –DCGI APPROVED9F Bore Size for usage with a variety of devices, with 300 Psi of pressure sustenance.Should accommodate virtually all interventional devicesLuer connector at the guiding catheter end, Rotating adapter at the guiding catheter endShould have bleed back safety mechanism, Stepwise control for open, semi-open and closed position
103Y- CONNECTOR KIT – PUSH PULL MECHANISM - STEPWISE CONTROL FOR OPEN, SEMI-OPEN AND CLOSED POSITION (OKAY – 2 type) - US FDA / CE APPROVEDShould accommodate virtually all interventional devicesLuer connector at the guiding catheter end, Rotating adapter at the guiding catheter endShould have bleed back safety mechanism
104W-CONNECTOR - BIFURCATION PTCA – USFDA/CE//DCGI APPROVEDTwo ports for insertion of two PTCA balloons or one balloon and one other part at the same timeLuer connector at the guiding catheter end, Rotating adapter at the guiding catheter end
105MANIFOLD WITH ATTACHED TUBINGS (ANGIO KIT) with 3 Port LEFT-OFF /RIGHT OFF ORIENTATION - US FDA/CE/DCGI APPROVED Pressure Integrity - 250 pascal per square inches -500 Pascal per square inches rating and wide port spacing. Clear polycarbonate body Integrated pre-flushed transducer port minimum flow rate of 85 ml/sec at 500 PSI. The design must minimize turbulence and air entrapment, evidenced by an \"airless rotator\" mechanism for enhanced patient safety Three side port manifold, One connector tubing for connecting Manifold to Tuohy Borst One luer lock control syringe (10 or 12 ml) for contrast injection Two large bore tubing (with flow regulating knob) for withdrawing contrast & Saline One 3 way stop-cock Color Coded Manifold with left-off /right off orientation.
106MANIFOLD WITH ATTACHED TUBINGS (ANGIO KIT) with 2 Port LEFT-OFF /RIGHT OFF ORIENTATION – USFDA/CE/DCGI APPROVED Pressure Integrity - 250 pascal per square inches -500 Pascal per square inches rating and wide port spacing. Clear polycarbonate body Integrated pre-flushed transducer port minimum flow rate of 85 ml/sec at 500 PSI. The design must minimize turbulence and air entrapment, evidenced by an \"airless rotator\" mechanism for enhanced patient safety Two side port manifold, One connector tubing for connecting Manifold to Tuohy Borst One luer lock control syringe (10 or 12 ml) for contrast injection Two large bore tubing (with flow regulating knob) for withdrawing contrast & Saline One 3 way stop-cock Color Coded Manifold with left-off /right off orientation.
107GUIDING CATHETER WITH SPECIAL EXTRA BACKUP CURVE LENGTH (ABU 3.0, 3.25, 3.5, 3.75, 4.0) – CE Approved Must have (ABU 3.0, 3.25, 3.5, 3.75, 4.0) and must include 6.5 French catheter Must have triple layered SS braided sandwich structure with outer polymer blend layer & inner PTFE layer Must Have Flat wire braided structure, Should have uncoated and non-braided atraumatic soft tip Must have various tip shapes and curves – Extrabackup left, JL&JR, AL&AR, MP Should have OD of 6F, 6.5F, 7F-8F.
108SPECIAL 6.5 INTRODUCER & 6.5F GUIDING CATHETER (COMBO) – FOR TRI PROCEDURES – CE APPROVED Must have triple layered SS braided sandwich structure with outer polymer blend layer & inner PTFE layer Must Have Flat wire braided structure Should have uncoated and non-braided atraumatic soft tip Must have various tip shapes and curves – Extrabackup left, JL&JR, AL&AR, MP
109RADIAL GUIDING CATHETER BOTH CURVE -US FDA APPROVED Should be braided with low friction inner layer Should have atraumatic soft tip Should be available in various tip shapes and curves for access to different parts of the peripheral vasculature, including renal double curve, cobra, multi – purpose and other shapes Should have OD of 6F-8F available Should have the largest ID for each OD Should have lengths ranging from 55-90 cm
110RADIAL GUIDING CATHETER BOTH CURVE -CE APPROVED Should be braided with low friction inner layer Should have atraumatic soft tip Should be available in various tip shapes and curves for access to different parts of the peripheral vasculature, including renal double curve, cobra, multi – purpose and other shapes Should have OD of 6F-8F available Should have the largest ID for each OD Should have lengths ranging from 55-90 cm
111RADIAL GUIDING CATHETER BOTH CURVE -DCGI APPROVED Should be braided with low friction inner layer Should have atraumatic soft tip Should be available in various tip shapes and curves for access to different parts of the peripheral vasculature, including renal double curve, cobra, multi – purpose and other shapes Should have OD of 6F-8F available Should have the largest ID for each OD Should have lengths ranging from 55-90 cm
112TRANSRADIAL GUIDING CATHETER RIGHT CURVE/ LEFT CURVE – US FDA /CE APPROVED Should be braided with low friction inner layer Should have atraumatic soft tip Should be available in various tip shapes and curves for access to different parts of the peripheral vasculature, including renal double curve, cobra, multi – purpose and other shapes Should have OD of 6F-8F available Should have the largest ID for each OD Should have lengths ranging from 55-90 cm
113RADIAL GUIDING CATHETER IKARI CURVE -DCGI APPROVEDShould be braided with low friction inner layerShould have atraumatic soft tipShould be available in various tip shapes and curves for access to different parts of the vasculatureShould have OD of 6F-8F availableShould have the largest ID for each ODShould have lengths ranging from 90 cm or above
114GUIDING CATHETER FOR PERIPHERAL VASCULAR USE – US FDA APPROVEDShould be available in various tip shapes and curves for access to different parts of the coronary vasculature, including judkins, multi – purpose and other shapesShould have OD of 5F-8F availableShould have lengths ranging from 55-100 cm
115GUIDING CATHETER FOR PERIPHERAL VASCULAR USE – CE APPROVEDShould be available in various tip shapes and curves for access to different parts of the coronary vasculature, including judkins, multi – purpose and other shapesShould have OD of 5F-8F availableShould have lengths ranging from 55-100 cm
116GUIDING CATHETER FOR PERIPHERAL VASCULAR USE – DCGI APPROVEDShould be available in various tip shapes and curves for access to different parts of the coronary vasculature, including judkins, multi – purpose and other shapesShould have OD of 5F-8F availableShould have lengths ranging from 55-100 cm
117GUIDING CATHETER FOR PERIPHERAL VASCULAR USE (5- 10F)– DCGI APPROVEDShould be available in various tip shapes and curves for access to different parts of the coronary vasculature, including judkins, multi – purpose and other shapesShould have OD of 5F-10F availableShould have lengths ranging from 55-100 cm
118LONG SHEATH FOR CONTRA – LATERAL ILIAC/ FEMORAL ACCESS – US FDA APPROVEDShould be low friction with inner coating to allow catheter manipulationShould have distal radio-opaque tip for enhanced visibility on fluoroscopyShould have a proximal hemostasis valve/ provision for tuohyborst valveShove be color coded for size identificationShould be available in 4F – 9 F size with the largest ID, lengths ranging from 40-110 cm
119Renal Guiding Catheter / Renal Guiding Catheter Double Curve/ Renal Guiding Catheter Single curve – US FDA /CE APPROVEDShould be braided with low friction inner layerShould be available in various tip shapes and curves for access to different parts of the peripheral vasculature, including renal double curve, cobra, multi – purpose and other shapesShould have OD of 6F-8F available, Should have lengths ranging from 55-90 cm
120Renal Guiding Catheter / Renal Guiding Catheter Double Curve/ Renal Guiding Catheter Single curve – DCGI APPROVEDShould be braided with low friction inner layerShould be available in various tip shapes and curves for access to different parts of the peripheral vasculature, including renal double curve, cobra, multi – purpose and other shapesShould have OD of 6F-8F available, Should have lengths ranging from 55-90 cm
121MOTHER & CHILD CATHETER – US FDA/CE APPROVEDWith reliable support with large inner lumen and inner PTFE.
122MOTHER & CHILD CATHETER – DCGIAPPROVEDWith reliable support with large inner lumen and inner PTFE.
123INTUBATION CATHETER FOR ASSISTING DELIVERY OF STENT IN DIFFICULT ANATOMIES – US FDA/CE APPROVED
124INTUBATION CATHETER FOR ASSISTING DELIVERY OF STENT IN DIFFICULT ANATOMIES – DCGI APPROVED
125RDC SHAPE GUIDING CATHETER FOR RENAL & C-LILAC ARTERY ANGIOPLASTY – - US FDA/CE / DCGI APPROVED
126GUIDE EXTENTION CATHETER: (GUIDE PLUS TYPE) – USFDA/PMDA APPROVEDGuide Extension Catheter available in variable diameters of 4.7F and 5.0F for accessing distal anatomy and delivering high profiledevices; Guide Extension Catheter with a tapered distal shaft for accessing distal and challenging coronary anatomy; Guide Extension Catheter with a Resinous atraumatic tip; Guide Extension Catheter with a large entry port design for easy device insertion
127GUIDE EXTENTION CATHETER (GUIDEZILLA TYPE) - US FDA APPROVED 120 proximal hypo-tube shaft 0.57 Inner diameter & 0.066” outer diameter Should be with proximal marker and 1 x 1 braiding
128GUIDE EXTENTION CATHETER (GUIDEZILLA TYPE) - CE APPROVED 120 proximal hypo-tube shaft 0.57 Inner diameter & 0.066” outer diameter Should be with proximal marker and 1 x 1 braiding
129GUIDE EXTENTION CATHETER (GUIDEZILLA TYPE) - DCGI APPROVED 120 proximal hypo-tube shaft 0.57 Inner diameter & 0.066” outer diameter Should be with proximal marker and 1 x 1 braiding
130MANUAL ASPIRATION CATHETERAspiration Catheter of 6F and 7F Guiding Catheter compatibility; 140 cm working length catheter with 140 cm stylet length; 90 cm and 100 cm depth markers; Provide 60ml aspiration syringe for high suction efficiency; large size collecting filter.
131MECHANICAL ASPIRATION DEVICE – USFDA
132MECHANICAL ASPIRATION DEVICE – CE/DCGI
133THROMBECTOMY CATHETERS WITH DISTAL BALLOON OCCLUSION AND AUTOMATED SUCTION DURING PTCA - US FDA APPROVED
134THROMBECTOMY CATHETERS WITH DISTAL BALLOON OCCLUSION AND AUTOMATED SUCTION DURING PTCA – CE/DCGI APPROVED
135THROMBECTOMY CATHETERS WITH MOTORIZED CUTTING AND SUCTION DURING PTCA - US FDA APPROVED
136THROMBECTOMY CATHETERS WITH MOTORIZED CUTTING AND SUCTION DURING PTCA – CE/DCGI APPROVED
137ASPIRATION THROMBECTOMY CATHETER –1.30 MM SQUARE SUCTION AREA - USFDA/PMDA APPROVED• Available in Size 6F, 7F Both, Must have entry profile 0.019 inches• Braided polyamide elastomer shaft, stainless steel wire braiding and Guide wire type Stylet,• 6.0mm tip length for making aspiration inlet to come closer to the target thrombus and 10cm-length depth.• Must Have Distal 40 cm Hydrophilic coating.
138ASPIRATION THROMBECTOMY CATHETER –1.30 MM SQUARE SUCTION AREA – CE APPROVED• Available in Size 6F, 7F Both, Must have entry profile 0.019 inches• Braided polyamide elastomer shaft, stainless steel wire braiding and Guide wire type Stylet,• 6.0mm tip length for making aspiration inlet to come closer to the target thrombus and 10cm-length depth.• Must Have Distal 40 cm Hydrophilic coating.
139ASPIRATION THROMBECTOMY CATHETER –1.30 MM SQUARE SUCTION AREA – DCGI APPROVED• Available in Size 6F, 7F Both, Must have entry profile 0.019 inches• Braided polyamide elastomer shaft, stainless steel wire braiding and Guide wire type Stylet,• 6.0mm tip length for making aspiration inlet to come closer to the target thrombus and 10cm-length depth.• Must Have Distal 40 cm Hydrophilic coating.
140COMPUTER AIDED VACCUM THROMBECTOMY CATHETER KIT FORVTE MECHANICAL ASPIRATION WITH WORKING LENGTH OF 100/115/130 CM. Should have multi-pitch, laser-cut stainless steel hypotube for 1:1 torque transfer & advance deliverability. Catheter Should have ID of (3.33 mm), OD of 12 Fr with HTORQ tip with 50 mm circumferencial sweep. compatible with 12 Fr sheath & wire platform (.014-.038) with proprietoryseperator technology. Aspiration tubing Audio visual cues to help indicate location of clot in system & compatible with engine with (-29.2) inHg Deep vacuum
141COMPUTER AIDED VACCUM THROMBECTOMY CATHETER KIT FORVTE MECHANICAL ASPIRATION WITH WORKING LENGTH OF 100 CM WITH FLASH MODE DESIGNED FOR EXPEDITED VENOUS CLOT REMOVAL. Should have multi-pitch, laser-cut stainless steel hypotube for 1:1 torque transfer & advance deliverability with Lightning Flash tubing + Flash Catheter +Accessories + Select Catheter. Catheter Should have ID of 4.5 mm, OD of 16 Fr with HTORQ tip with 50 mm circumferencial sweep. compatible with 16 Fr sheath & wire platform (.014-.038) with proprietoryseperator technology. Should have Catheter hub port +Aspiration tubing port + flow cap + Flush port as RHV Packaged with 6F Select Catheter with BER or H1 tip to further aid in vessel selection. Dual clot Detection Algorithems with Max ID Technology. Aspiration tubing Audio visual cues to help indicate location of clot in system & compatible with engine with (-29.2) inHg Deep vacuum
142COMPUTER AIDED VACCUM THROMBECTOMY CATHETER KIT FORVTE MECHANICAL ASPIRATION WITH WORKING LENGTH OF 115 CM WITH FLASH MODE DESIGNED FOR EXPEDITED VENOUS CLOT REMOVAL. Should have multi-pitch, laser-cut stainless steel hypotube for 1:1 torque transfer & advance deliverability with Lightning Flash tubing + Flash Catheter +Accessories + Select Catheter. Catheter Should have ID of (4.5 mm\"), OD of 16 Fr with HTORQ tip with 50 mm circumferencial sweep. compatible with 16 Fr sheath & wire platform (.014-.038) with proprietoryseperator technology. Should have Catheter hub port +Aspiration tubing port + flow cap + Flush port as RHV Packaged with 6F Select Catheter with BER or H1 tip to further aid in vessel selection. Dual clot Detection Algorithems with Max ID Technology. Aspiration tubing Audio visual cues to help indicate location of clot in system & compatible with engine with (-29.2) inHg Deep vaccum
143CATHETER- Stainless steel hypotube at the proximal end,designed to enhance deliverability to the desired vesselwith optimal visualization and placement. Catheter size : 6 F Catheter type : Low crossing profile of 1.75mm with an ID of .044”. Separator : proprietary separator technology for easy and quick aspiration, with 200 cm length and distal OD of .89 mm. Safety features : Ability to get the clot out and not macerate .
144SEPARATOR COMPONANT: 150CM - proprietary separator technology for easy and quick aspiration, with150 cm length and distal OD of 1.83 mm. 175 CM - proprietary separator technology for easy and quick aspiration, with175 cm length and distal OD of 1.40 mm.
145ASPIRATION SOURCE - ENGINE CANISTER _ 1 litre capacity collecting jar with measuring marks. Integrated clot catcher with completely airtight and break resistant to – 2 ATM pressure. Single touch operation. LED Canister lighting.
146ENGINE POWERFUL ASPIRATION PUMP with 29-inch HG deep vacuum. Canister with integrated clot catheter. LED Canister should be sleek and simple design.
147CORONARY MICRO-GUIDE CATHETER WITH GOLD MARKER– DISTAL 70 CM HYDROPHILIC COAT. USFDA/PMDA APPROVED• Must Have tapered stainless steel braid mesh construction and Inner PTFE Layer.• Must Have 13 CM floppy distal segment, 70cm distal hydrophilic coating• Must Have Distal outer diameter 1.8 Fr or less and Proximal Outer diameter 2.6Fr.• Catheter Length 130cm for antegrade approach and 150 cm for retrograde approach.
148CORONARY MICRO-GUIDE CATHETER WITH GOLD MARKER– DISTAL 70 CM HYDROPHILIC COAT. CE/DCGI APPROVED• Must Have tapered stainless steel braid mesh construction and Inner PTFE Layer.• Must Have 13 CM floppy distal segment, 70cm distal hydrophilic coating• Must Have Distal outer diameter 1.8 Fr or less and Proximal Outer diameter 2.6Fr.• Catheter Length 130cm for antegrade approach and 150 cm for retrograde approach.
149Re-Entry Catheter for CTO for Coronary – US FDA/CE / DCGI APPROVED
150Re-Entry Wire for CTO for Coronary – US FDA/CE / DCGI APPROVED
151Re-Entry Balloon with Two exit Port for CTO for Coronary – US FDA/CE / DCGI APPROVED
152MICROCATHETER – TIP ENTRY – 1.3F - 135, 150 CM - USFDA APPROVED• Tapered soft tip, Tip entry 1.3 Fr distal 2.6 Fr & Proximal 2.8 Fr having SHINKA Shaft length 135 & 150 cm • USFDA approved
153MICROCATHETER –TIP ENTRY – 1.3F -135, 150 CM – CE/DCGI APPROVED• Tapered soft tip, Tip entry 1.3 Fr distal 2.6 Fr & Proximal 2.8 Fr having SHINKA Shaft length 135 & 150 cm • USFDA approved
154MICROCATHETER – TIP ENTRY – 1.4F -135, 150 CM - USFDA APPROVED• Tapered soft tip, Tip entry 1.4 Fr distal 1.9 Fr & Proximal 2.6 Fr having SHINKA Shaft length 135 & 150 cm • USFDA approved
155MICROCATHETER – TIP ENTRY – 1.4F -135, 150 CM – CE/DCGI APPROVED• Tapered soft tip, Tip entry 1.4 Fr distal 1.9 Fr & Proximal 2.6 Fr having SHINKA Shaft length 135 & 150 cm • USFDA approved
156MICROCATHETER - DOUBLE LUMEN – USFDA APPROVED
157MICROCATHETER - DOUBLE LUMEN – USFDA APPROVED
158COAXIAL MICROCATHETER SYSTEM FOR PERIPHERAL VESSELS – USFDA/PMDA APPROVED 2.8Fr and 2.4Fr - 2.4 and 2.0Fr Pre-Shaped Tip tungsten coil pitch construction, PTFE inner layer, DMSO Compatible, Radiopaque 0.7 mm platinum/iridium markers
159COAXIAL MICROCATHETER SYSTEM FOR PERIPHERAL VESSELS – CE/DCGI APPROVED 2.8Fr and 2.4Fr - 2.4 and 2.0Fr Pre-Shaped Tiptungsten coil pitch construction, PTFE inner layer, DMSO Compatible, Radiopaque 0.7 mm platinum/iridium markers
160RADIAL ARTERY HAEMOSTASIS DEVICE- (TRANS RADIAL BAND) – USFDA/PMDA APPROVEDsizes – 24cm and 29cm, Must have belt magic tape for fast application.Consists of two balloon specially designed for spot compression of the radial puncture site.Must have curved support plate. Must have green Positioning marker
161RADIAL ARTERY HAEMOSTASIS DEVICE- (TRANS RADIAL BAND) – CE/DCGI APPROVEDsizes – 24cm and 29cm, Must have belt magic tape for fast application.Consists of two balloon specially designed for spot compression of the radial puncture site. Must have curved support plate. Must have green Positioning marker
162FEMORAL COMPRESSION DEVICES – DISC / DOME BASED COMPRESSION- US FDA APPROVED
163FEMORAL COMPRESSION DEVICES – DISC / DOME BASED COMPRESSION – CE/DCGI APPROVED
164ICD/PI COMPRESSION DEVICES
165PTCA/CORONARY ANGIOGRAPHY DRAP SETContains Absorbable Disposable Woven Cloth Sheet of Size 1.5 meter z 2.5 meter (2No)Contains Absorbable Disposable Woven Cloth Sheet of Size 1.5 meter x 1metr (2No)
166G- Kit Type Disposable surgeons Gown Set
167Disposable Plastic Sheet of Size 1.5x2.5 mtr
168ANGIOGRAPHY CINE RECORDABLE DISK- COMPACT R TYPE Media with Cover with Govt. Medical College Kota & M.C logo printed over the cover
169ANGIOGRAPHY CINERECORDABLE -DIGITAL VERSETILE – RTYPE Media with Cover with Govt. Medical College Kota & M.C logo printed over the cover
170G-Kit Type Disposable Sterile Surgeon Gowns
171Disposable E.O. Sterile Angiography drap set kit (Radial),should have two long disposable sheet in both sizes( 1.50 meter X 1.0 meter with hole of 3 inch radius -1 quantity)( 1.50 meter X 2.5 meter with hole of 3 inch radius – 2 in quantity)
172Disposable E.O Sterile Angiography drap set kit (Femoral),Should have two long disposable sheet in both sizes( 1.50 meter X 1.0 meter with hole of 3 inch radius -1 quantity),( 1.50 meter X 2.5 meter with hole of 3 inch radius – 2 in quantity)
173LONG DISPOSABLE E.O STERILE SHEET(1.50 METER X 2.5 METER SIZE)
174SMALL DISPOSABLE E.O STERILE SHEET(1.50 METER X 1.0 METER SIZE)
175RAT PAD TYPE RADIATION PROTECTION DEVICE SHIELD IN ALL SIZES
176DISPOSABLE RADIATION PROTECTION SHIELDS & DRAPES Disposable non fenestrated lead free absorbable sterile barrier pad for protection during fluoroscopy for coronary interventional procedures with a minimum thickness of 0.25 mm lead equivalence, with patented bi-layer homogenous sheet tested & certified to IEC 61331-1:2014, ASTM F3094-14, DIN 6857-1, USFDA approved, ISO 13485 & BARC certifiedwith attenuation greater than 92% at 90kVp. Dimensions: 12” x 17”
177DISPOSABLE RADIATION PROTECTION SHIELDS & DRAPES Disposable scoop fenestrated lead free absorbable sterile barrier pad for protection during fluoroscopy for coronary interventional procedures with a minimum thickness of 0.25 mm lead equivalence, with patented bi-layer homogenous sheet tested & certified to IEC 61331-1:2014, ASTM F3094-14, DIN 6857-1, USFDA approved, ISO 13485 & BARC certifiedwith attenuation greater than 92% at 90kVp. Dimensions: 12” x 17”, Fenestration: 3.5” x 1.5”
178DISPOSABLE RADIATION PROTECTION SHIELDS & DRAPES Disposable circular fenestrated lead free absorbable sterile barrier pad for protection during fluoroscopy for coronary interventional procedures with a minimum thickness of 0.25 mm lead equivalence, with patented bi-layer homogenous sheet tested & certified to IEC 61331-1:2014, ASTM F3094-14, DIN 6857-1, USFDA approved, ISO 13485 & BARC certifiedwith attenuation greater than 92% at 90kVp. Dimensions: 12” x 17”, Fenestration: Circle Fenestration: 1.5”
179DISPOSABLE RADIATION PROTECTION SHIELDS & DRAPES Disposable non fenestrated lead free absorbable sterile barrier pad for protection during fluoroscopy for peripheral interventional procedures with a minimum thickness of 0.25 mm lead equivalence, with a minimum length of 34 inches and covering the length from hip to toe; with patented bi-layer homogenous sheet tested & certified to IEC 61331-1:2014, ASTM F3094-14, DIN 6857-1, USFDA approved, ISO 13485 & BARC certified with attenuation greater than 92% at 90kVp. Dimensions: 12” x 34”
180DISPOSABLE RADIATION PROTECTION CAPSDisposable non fenestrated lead-free absorbable head cap for protection during fluoroscopy for interventional procedures with a minimum thickness of 0.25 mm lead equivalence and USFDA approved
181External Temporary Pacemaker
182PTCA Guide Wire – 2 Mm Silicon Coated Distal Tip, 0.014” Diameter And 180 Cm Length – USFDA/PMDA Approved• Must have Platinum coil at distal tip. Balance of Hydrophilic and Hydrophobic coating• Must have directly jointed SUS and Nitinol shaft through DuoCore technology and silicon coated joint.• Must have PTFE Coating from 25 to 180 cm length. & Mucus coat hydrophilic coating up to 248 mm• Should have 0.6 & 1.0 gram force tip loads
183PTCA Guide Wire – 2 Mm Silicon Coated Distal Tip, 0.014” Diameter And 180 Cm Length – CE/DCGI Approved• Must have Platinum coil at distal tip. Balance of Hydrophilic and Hydrophobic coating• Must have directly jointed SUS and Nitinol shaft through DuoCore technology and silicon coated joint.• Must have PTFE Coating from 25 to 180 cm length. & Mucus coat hydrophilic coating up to 248 mm• Should have 0.6 & 1.0 gram force tip loads
184CTO Stiff PTCA Wire - 3.6-gram Force tip load – 2 mm Silicon coated distal tip, 0.014” Diameter and 180 cm – USFDA/PMDA Approved•Must have Platinum coil at distal tip. Balance of Hydrophilic and Hydrophobic coating•Must have directly jointed SUS and Nitinol shaft through DuoCore technology and silicon coated joint.•Must have M coat hydrophilic coating up to 248 mm & PTFE Coating from 25 to 180 cm length. Should have 3.6-gram fore tip load
185CTO Stiff PTCA Wire - 3.6-gram Force tip load – 2 mm Silicon coated distal tip, 0.014” Diameter and 180 cm – CE/DCGI Approved•Must have Platinum coil at distal tip. Balance of Hydrophilic and Hydrophobic coating•Must have directly jointed SUS and Nitinol shaft through DuoCore technology and silicon coated joint.•Must have M coat hydrophilic coating up to 248 mm & PTFE Coating from 25 to 180 cm length.•Should have 3.6-gram fore tip load
186PTCA GUIDEWIRE FOR SEPTAL NAVIGATION - 0.03 GM TIP LOAD– USFDA APPROVED•Tip load 0.3 gm, Hydrophilic coating with Sion Tec Technology, coil length 19 cm, Length 190 cm & 300 cm
187PTCA GUIDEWIRE FOR SEPTAL NAVIGATION - 0.03 GM TIP LOAD – CE/DCGI APPROVED•Tip load 0.3 gm, Hydrophilic coating with Sion Tec Technology, coil length 19 cm, Length 190 cm & 300 cm
188PTCA GUIDEWIRE FOR CTO – 3 GM TIP LOAD - 8.5 CM SPRING COIL - USFDA APPROVED•Stainless core, ACTONE technology, Polymer jacket with Hydrophilic coating, Tip load 3 gm, Radiopaque length 3 cm, Spring coil 8.5 cm, Length 190 cm & 300 cm
189PTCA GUIDEWIRE FOR CTO – 3 GM TIP LOAD - 8.5 CM SPRING COIL - CE/DCGI APPROVED•Stainless core, ACTONE technology, Polymer jacket with Hydrophilic coating, Tip load 3 gm, Radiopaque length 3 cm, Spring coil 8.5 cm, Length 190 cm & 300 cm
190PTCA GUIDEWIRE FOR CTO – 3 GM TIP LOAD – 3 CM SPRING COIL – USFDA APPROVED•Stainless core, ACTONE technology, Polymer jacket with Hydrophilic coating, Tip load 3 gm, Radiopaque length 3 cm, Spring coil 3 cm, Length 190 cm & 300 cm
191PTCA GUIDEWIRE FOR CTO – 3 GM TIP LOAD – 3 CM SPRING COIL – CE/DCGI APPROVED•Stainless core, ACTONE technology, Polymer jacket with Hydrophilic coating, Tip load 3 gm, Radiopaque length 3 cm, Spring coil 3 cm, Length 190 cm & 300 cm
192PTCA GUIDEWIRE FOR CTO – 3 GM TIP LOAD – 11 CM SPRING COIL – USFDA APPROVED•Stainless core, ACTONE technology, Polymer jacket length 40 cm with Hydrophilic coating 50 cm, Tip Load 3 gm, Radiopaque length 3 cm, Spring coil 11 cm, Length 200 cm & 300 cm with straight tip & 1 mm pre shape
193PTCA GUIDEWIRE FOR CTO – 3 GM TIP LOAD – 11 CM SPRING COIL – CE/DCGI APPROVED•Stainless core, ACTONE technology, Polymer jacket length 40 cm with Hydrophilic coating 50 cm, Tip Load 3 gm, Radiopaque length 3 cm, Spring coil 11 cm, Length 200 cm & 300 cm with straight tip & 1 mm pre shape
194PTCA GUIDEWIRE FOR CTO – 0.6 GM TIP LOAD – 28 CM SPRING COIL – USFDA APPROVEDSion Tecc Technology, ACTONE Braiding, 17 cm Polymer Jacket 17 cm Slip coat coating, Radiopaque Length 16 cm 28 cm spring coil, Tapered tip 0.010-inch, Tip load 0.6 gm
195PTCA GUIDEWIRE FOR CTO – 0.6 GM TIP LOAD – 28 CM SPRING COIL – CE/DCGI APPROVEDSion Tecc Technology, ACTONE Braiding, 17 cm Polymer Jacket 17 cm Slip coat coating, Radiopaque Length 16 cm 28 cm spring coil, Tapered tip 0.010-inch, Tip load 0.6 gm
196PTCA GUIDEWIRE FOR CTO – 1.0 GM TIP LOAD – 28 CM SPRING COIL – USFDA APPROVEDSion Tecc Technology, ACTONE Braiding, 17 cm Polymer Jacket 17 cm Slip coat coating, Radiopaque Length 16 cm 28 cm spring coil, Tapered tip 0.010-inch, Tip load 1.0 gm
197PTCA GUIDEWIRE FOR CTO – 1.0 GM TIP LOAD – 28 CM SPRING COIL – CE/DCGI APPROVEDSion Tecc Technology, ACTONE Braiding, 17 cm Polymer Jacket 17 cm Slip coat coating, Radiopaque Length 16 cm 28 cm spring coil, Tapered tip 0.010-inch, Tip load 1.0 gm
198PTCA GUIDEWIRE FOR CTO – 1.7, 3.5, 4.5 GM TIP LOAD – 15 CM SPRING COIL – USFDA APPROVED Sion Tecc Technology, ACTONE Braiding, spring coil length 15 cm, Radiopaque Length 15 cm, Tapered tip 0.010 inch Gaia 1st tip load 1.7 gm Tapered tip 0.011 inch Gaia 2nd tip load 3.5 gm, Tapered tip 0.012 inch Gaia 3rd tip load 4.5 gm,•All are mini - pre shaped 1mm 45 degree angle , Micro cone tip used for CTO Cases
199PTCA GUIDEWIRE FOR CTO – 1.7, 3.5, 4.5 GM TIP LOAD – 15 CM SPRING COIL – CE/DCGI APPROVED Sion Tecc Technology, ACTONE Braiding, spring coil length 15 cm, Radiopaque Length 15 cm, Tapered tip 0.010 inch Gaia 1st tip load 1.7 gm Tapered tip 0.011 inch Gaia 2nd tip load 3.5 gm, Tapered tip 0.012 inch Gaia 3rd tip load 4.5 gm, All are mini - pre shaped 1mm 45 degree angle , Micro cone tip used for CTO Cases
200PTCA GUIDEWIRE FOR CTO – 3.0 GM TIP LOAD Single core , Core to tip , Tip load 3 gm , Tip radiopacity 3 cm , tip diameter 0.014 inch , Tip radiopacity 11 cm , slip coat over the spring coil used for CTO Lesion
201PTCA GUIDEWIRE FOR CTO – 3.0, 6.0, 12 GM TIP LOAD Single core , Core to tip , Tip load 3 gm ,6 gm , 12 gm Tip radiopacity 3 cm , tip diameter 0.014 inch , Tip radiopacity 11 cm , Silicone coating coat over the spring coil used for CTO Lesion
202PTCA GUIDEWIRE FOR CTO – 9.0, 12, 20 GM TIP LOAD Single core Core to tip , Tip load 9 gm tapered 0.090 , 12 gm tapered 0.090 inch & 20 gm Tapered tip 0.080 inch for CTO Lesion
203PTCA GUIDEWIRE FOR CTO – 3.0 GM TIP LOADSingle core Core to tip , Tip load 3 gm, radiopacity 3 cm , guide wire length 330 cm , slip coat over the spring coil
204PTCA GUIDEWIRE FOR CTO – 2.0, 4.0, 6.0 GM TIP LOAD Sion Tecc Technology, ACTONE Braiding, spring coil length 15 cm , Radiopaque Length 15 cm , Tapered tip 0.010 inch Gaia 1st tip load 2 gm Tapered tip 0.011 inch Gaia 2nd tip load 4 gm, Tapered tip 0.012 inch Gaia 3rd tip load 6 gm, All are mini - pre shaped 1mm 45 degree angle , Micro cone tip , Xtrand Coil
205PTCA WIRES WITH FACILITY OF BOOT LINKS FOR EXTENSION OF REGULAR WIRE - US FDA APPROVED
206Micro-wire (0.008”-0.012” ) with Hydrophilic coating
207Special inflation device for high pressure (55 ATM), High Resolution
208PTCA WIRE – TIP LOAD - 0.5-0.7GM – USFDA Approved Regular Workhorse Guidewire with Tapered Elastinite Nitinol Core, Durasteel Ribbon Tip and available in both hydrophilic and hydrophobic coatings between tip load 0.5-0.7gm
209PTCA WIRE – TIP LOAD - 0.5-0.7GM –WITH INTERMEDIATE POLYMER SLEEVE - USFDA APPROVED Regular Workhorse Guidewire with Elastinite Nitinol Core, Hyten Stainless Steel Tip, Intermediate polymer sleeve with Hydrocoat on distal tip between tip load 0.5-0.7gm
210PTCA WIRE – TIP LOAD - 0.5-0.7GM –WITH INTERMEDIATE POLYMER SLEEVE - CE/DCGI APPROVED Regular Workhorse Guidewire with Elastinite Nitinol Core, Hyten Stainless Steel Tip, Intermediate polymer sleeve with Hydrocoat on distal tip between tip load 0.5-0.7gm
211PTCA WIRE – TIP LOAD - 0.5-0.7GM –WITH HYTEN STAINLESS STEEL TIP - USFDA APPROVED Regular Workhorse Guidewire with Elastinite Nitinol Core, Hyten Stainless Steel Tip Intermediate polymer sleeve with Smoothglide coating on proximal and Turbocoat on distal tip between tip load 0.5-0.7gm
212PTCA WIRE – TIP LOAD - 0.5-0.7GM –WITH HYTEN STAINLESS STEEL TIP - CE/DCGI APPROVED Regular Workhorse Guidewire with Elastinite Nitinol Core, Hyten Stainless Steel Tip Intermediate polymer sleeve with Smoothglide coating on proximal and Turbocoat on distal tip between tip load 0.5-0.7gm
213PTCA WIRE – TIP LOAD – 0.6 GM –WITH STAINLESS STEEL CORE WITH SHAPING RIBBON TIP - USFDA APPROVED Regular Workhorse Guidewire with Tapered Stainless Steel Core and Shaping Ribbon Tip available in tip load of 0.6gm with Poly Tetra Fluoro Ethylene Coating on Proximal End
214PTCA WIRE – TIP LOAD – 0.6 GM –WITH STAINLESS STEEL CORE WITH SHAPING RIBBON TIP – CE/DCGI APPROVED Regular Workhorse Guidewire with Tapered Stainless Steel Core and Shaping Ribbon Tip available in tip load of 0.6gm with Poly Tetra Fluoro Ethylene Coating on Proximal End
215PTCA WIRE – TIP LOAD – 0.8 GM – RESPONSEASE CORE GRIND WITH PALLADIUM-RHENIUM TIP – USFDA APPROVED Regular Workhorse Guidewire with Responsease Core Grind Technology and 3cm Palladium-Rhenium Radiopaque Distal Tip available in tip load of 0.8gm with 190 and 300cm
216PTCA WIRE – TIP LOAD – 0.8 GM – RESPONSEASE CORE GRIND WITH PALLADIUM-RHENIUM TIP – CE/DCGI APPROVED Regular Workhorse Guidewire with Responsease Core Grind Technology and 3cm Palladium-Rhenium Radiopaque Distal Tip available in tip load of 0.8gm with 190 and 300cm
217PTCA WIRE – TIP LOAD – 0.9 GM – RESPONSEASE CORE GRIND WITH UNCOATED TIP – USFDA APPROVED Workhorse Guidewire with Durasteel Core, Responsease Core Grind Technology and 1.5 cm uncoated distal tip for tactile feedback available in multiple variants with exact same tip load of 0.9gm
218PTCA WIRE – TIP LOAD – 0.9 GM – RESPONSEASE CORE GRIND WITH UNCOATED TIP – CE/DCGI APPROVED Workhorse Guidewire with Durasteel Core, Responsease Core Grind Technology and 1.5 cm uncoated distal tip for tactile feedback available in multiple variants with exact same tip load of 0.9gm
219PTCA WIRE – TIP LOAD – 0.6-.8 GM – TRIPLE SPRING WITH ROTARY SWAGGING TIP – USFDA APPROVED Workhorse Guidewire with Triple Spring 304V Stainless Steel with NiTi Distal Core and Cold Working Rotary Swagging Tip available in tip loads between 0.6-0.8gm and lengths (190/300cm).
220PTCA WIRE – TIP LOAD – 0.6-.8 GM – TRIPLE SPRING WITH ROTARY SWAGGING TIP – CE/DCGI APPROVED Workhorse Guidewire with Triple Spring 304V Stainless Steel with NiTi Distal Core and Cold Working Rotary Swagging Tip available in tip loads between 0.6-0.8gm and lengths (190/300cm).
221SPECIALITY PTCA WIRE – LOW SUPPORT - TIP LOAD 0.8-1.0 GM – USFDA APPROVED Low Support Durasteel Guidewire with Full Polymer Coating available in tip loads between 0.8-1.0gm
222SPECIALITY PTCA WIRE – LOW SUPPORT - TIP LOAD 0.8-1.0 GM – CE/DCGI APPROVED Low Support Durasteel Guidewire with Full Polymer Coating available in tip loads between 0.8-1.0gm
223SPECIALITY PTCA WIRE – MEDIUM SUPPORT - TIP LOAD 1.0-1.2 GM – USFDA APPROVED Medium Support Durasteel Guidewire with Full Polymer Coating available in tiploads between 1.0-1.2gm
224SPECIALITY PTCA WIRE – MEDIUM SUPPORT - TIP LOAD 1.0-1.2 GM – CE/DCGI APPROVED Medium Support Durasteel Guidewire with Full Polymer Coating available in tiploads between 1.0-1.2gm
225SPECIALITY PTCA WIRE – EXTRA SUPPORT - TIP LOAD 1.0-1.2 GM – USFDA APPROVED Extra Support Durasteel Guidewire with Full Polymer Coating available in tiploads between 1.0-1.2gm
226SPECIALITY PTCA WIRE – EXTRA SUPPORT - TIP LOAD 1.0-1.2 GM – CE/DCGI APPROVED Extra Support Durasteel Guidewire with Full Polymer Coating available in tiploads between 1.0-1.2gm
227SPECIALITY PTCA WIRE – EXTRA SUPPORT - TIP LOAD 1.3-1.5 GM – USFDA APPROVED Extra Support Durasteel Guidewire with Full Polymer Cover, Marker at 4.5cm from distal tip and tipload between 1.3-1.5gm
228SPECIALITY PTCA WIRE – EXTRA SUPPORT - TIP LOAD 1.3-1.5 GM – CE/DCGI APPROVED Extra Support Durasteel Guidewire with Full Polymer Cover, Marker at 4.5cm from distal tip and tipload between 1.3-1.5gm
229SPECIALITY PTCA WIRE – STAINLESS STEEL - TIP LOAD 1.0 GM – USFDA APPROVED Stainless Steel Guidewire with Stainless Steel coils and hydrophilic coating availabe in tipload of 1gm with radioapaque tip of 3cm
230SPECIALITY PTCA WIRE – STAINLESS STEEL - TIP LOAD 1.0 GM – CE/DCGI APPROVED Stainless Steel Guidewire with Stainless Steel coils and hydrophilic coating availabe in tipload of 1gm with radioapaque tip of 3cm
231SPECIALITY PTCA WIRE – STAINLESS STEEL - TIP LOAD 0.6 - 0.7 GM – USFDA APPROVED Stainless Steel Guidewire with Intermediate polymer sleeve and hydrophobic coating availabe in tipload between 0.6-0.7gm with radioapaque tip of 3cm
232SPECIALITY PTCA WIRE – STAINLESS STEEL - TIP LOAD 0.6 - 0.7 GM – CE/DCGI APPROVED Stainless Steel Guidewire with Intermediate polymer sleeve and hydrophobic coating availabe in tipload between 0.6-0.7gm with radioapaque tip of 3cm
233SPECIALITY PTCA WIRE – ELASTINITE NITINOL - TIP LOAD 0.7 - 0.8 GM – USFDA APPROVED Elastinite Nitinol Guidewire with Shaping Ribbon Tip and Hydrophilic Coating avaialble in tipload between 0.7-0.8gm with radiopaque tip of 4.5cm
234SPECIALITY PTCA WIRE – ELASTINITE NITINOL - TIP LOAD 0.7 - 0.8 GM – CE/DCGI APPROVED Elastinite Nitinol Guidewire with Shaping Ribbon Tip and Hydrophilic Coating avaialble in tipload between 0.7-0.8gm with radiopaque tip of 4.5cm
235SPECIALITY PTCA WIRE – STAINLESS STEEL - TIP LOAD 1.7, 4.7, 6.2, 8.7 GM – USFDA APPROVED Stainless Steel Penetration Guidewire with Core-to-Tip design and hydrophilic coating available in tipload of 1.7, 4.7, 6.2, 8.7 gm
236SPECIALITY PTCA WIRE – STAINLESS STEEL - TIP LOAD 1.7, 4.7, 6.2, 8.7 GM – CE/DCGI APPROVED Stainless Steel Penetration Guidewire with Core-to-Tip design and hydrophilic coating available in tipload of 1.7, 4.7, 6.2, 8.7 gm
237SPECIALITY PTCA WIRE – DURASTEEL - TIP LOAD 2.5-2.7 GM – USFDA APPROVED Extra Support Durasteel CTO Guidewire with Full Polymer Cover, Gold Marker at 4.5cm from distal tip and tipload between 2.5-2.7gm
238SPECIALITY PTCA WIRE – DURASTEEL - TIP LOAD 2.5-2.7 GM – CE/DCGI APPROVED Extra Support Durasteel CTO Guidewire with Full Polymer Cover, Gold Marker at 4.5cm from distal tip and tipload between 2.5-2.7gm
239PTCA WIRE FOR CTO TIP LOAD –4.5-4.8 – USFDA APPROVED CTO Guidewire having Durasteel Core, Intermediate Polymer Sleeve available in tipload between 4.5-4.8gm Tipload and penetration power of 40 kgpsin
240PTCA WIRE FOR CTO TIP LOAD –9.5-9.7– USFDA APPROVED PTCA CTO Guidewire having Durasteel Core, Intermediate Polymer Sleeve available in tipload between 9.5-9.7gm Tipload and penetration power of 80 kgpsin
241PTCA WIRE FOR CTO TIP LOAD –13.5-13.9 – USFDA APPROVED PTCA CTO Guidewire having Durasteel Core, Intermediate Polymer Sleeve available in tipload between 13.5-13.9gm Tipload and penetration power of 120 kgpsin
242PTCA WIRE FOR CTO TIP LOAD –12-12.5 – USFDA APPROVEDCTO Guidewire having Durasteel Core, Intermediate Polymer Sleeve available in tipload between 12.0-12.5gm Tipload and penetration power of 140 kgpsin
243PTCA WIRE FOR CTO TIP LOAD –12.8-13.0 – USFDA APPROVEDCTO Guidewire having Durasteel Core, Intermediate Polymer Sleeve available in tipload between 12.8-13.0gm Tipload and penetration power of 200 kgpsin
244PTCA WIRE FOR CTO – TIP LOAD – 11, 14 GM - USFDA APPROVEDCTO Guidewire having having Durasteel Core, Hydrophilic coating (excluding the tip) for lubricity and ease of movement within amicrocathete, textured tip with tip size of 0.009 Inches and tip angle of 25 degrees at 1 mm of tip. Should have the tip load of 11, 14GM
245HIGH PRESSURE NON-COMPLIANT BALLOON – THREE PLEATS RE-WRAPPABLE STRUCTURE - PMDA APPROVED•with Innovative triple layer balloon technology with high pressure resistance of 22 ATM.•Must Have Elastomer outer layer, middle layer of Polyamide and inner most layer of Elastomer.•Must Have nominal pressure of 12atm and RBP of 22atm.•Shorter thin distal tip of 2.9mm with low entry profile of 0.43 mm. must have hydrophilic Mucus coating•Must Have 3.0 mm Short taper balloon shoulder & Must Have 0.8mm Shorter and 25μm Thinner radiopaque marker for lower crossing profile.•Must have 2.6 French stainless steel core wire structured shaft & stainless-steel stylet in Mid Shaft. Must Have Hypotube without PTFE Coating.
246HIGH PRESSURE NON-COMPLIANT BALLOON – THREE PLEATS RE-WRAPPABLE STRUCTURE – CE/DCGIAPPROVED with Innovative triple layer balloon technology with high pressure resistance of 22 ATM. Must Have Elastomer outer layer, middle layer of Polyamide and inner most layer of Elastomer. Must Have nominal pressure of 12atm and RBP of 22atm. Shorter thin distal tip of 2.9mm with low entry profile of 0.43 mm. must have hydrophilic Mucus coating Must Have 3.0 mm Short taper balloon shoulder & Must Have 0.8mm Shorter and 25μm Thinner radiopaque marker for lower crossing profile. Must have 2.6 French stainless steel core wire structured shaft & stainless-steel stylet in Mid Shaft. Must Have Hypotube without PTFE Coating.
247CTO Balloon with Ultra – Ultra Low Entry profile of 0.016\" must have hydrophilic Mucus coating -PMDA APPROVED Should have smallest diameter 1.00mm and 5mm length. - three pleats Re-wrappable structure. Must Have 0.8mm Shorter and 25μm Thinner radiopaque marker for lower crossing profile. Must have Flexible Tip with short balloon bonding part of 0.4mm. nominal pressure of 06 ATM and RBP of 14 ATM Must have 2.4 to 2.7 French tapered stainless steel core wire structured shaft
248CTO Balloon with Ultra – Ultra Low Entry profile of 0.016\" must have hydrophilic Mucus coating -CE/DCGI APPROVED Should have smallest diameter 1.00mm and 5mm length. - three pleats Re-wrappable structure. Must Have 0.8mm Shorter and 25μm Thinner radiopaque marker for lower crossing profile. Must have Flexible Tip with short balloon bonding part of 0.4mm. nominal pressure of 06 ATM and RBP of 14 ATM Must have 2.4 to 2.7 French tapered stainless steel core wire structured shaft
249PTCA BALLOON SEMI COMPLIANT FOR CTO – USFDA APPROVED CTO Indicated Slim Seal Technology on distal tip with lesion entry profile of 0.016\", crossing profile of 0.021\" and single flexible Tungsten marker available in unique diameter of 1.2mm with variety of lengths Diameter – 1.2, 1.5. 2.0 Length – 6, 8, 12, 15, 20 & in 2MM-25, 30
250PTCA BALLOON SEMI COMPLIANT FOR CTO – CE/DCGI APPROVED CTO Indicated Slim Seal Technology on distal tip with lesion entry profile of 0.016\", crossing profile of 0.021\" and single flexible Tungsten marker available in unique diameter of 1.2mm with variety of lengths Diameter – 1.2, 1.5. 2.0 Length – 6, 8, 12, 15, 20 & in 2MM-25, 30
251PTCA BALLOON SEMI COMPLIANT – USFDA APPROVED with Slim Seal Technology on distal tip with crossing profile of 0.021”, Lesion entry profile of 0.017” and Microglide Coating available in diameter 2.25-5.00mm and lengths 6-30mm Diameter – 2.25, 2.5, 2.75, 3.0, 3.25, 3.5, 3.75, 4.0, 4.5, 5.0 mm Length - 6, 8, 12, 15, 20, 25, 30
252PTCA BALLOON SEMI COMPLIANT – CE/DCGI APPROVED with Slim Seal Technology on distal tip with crossing profile of 0.021”, Lesion entry profile of 0.017” and Microglide Coating available in diameter 2.25-5.00mm and lengths 6-30mm Diameter – 2.25, 2.5, 2.75, 3.0, 3.25, 3.5, 3.75, 4.0, 4.5, 5.0 mm Length - 6, 8, 12, 15, 20, 25, 30
253PTCA BALLOON NON-COMPLIANT – USFDA APPROVED with Multilayer CrossFlex Balloon Technology and Round Tip with Lesion Entry Profile of 0.018” available in diameter1.5mm-5mm and lengths in 6mm-25mm with Skive Technology on Mid shaft of Dilatation Catheter Diameter – 1.5, 2.0, 2.25, 2.5, 2.75, 3.0, 3.25, 3.5, 3.75, 4.0, 4.5, 5.0 mm Length- 6, 8, 12, 15, 20, 25
254PTCA BALLOON NON-COMPLIANT – CE/DCGI APPROVED with Multilayer CrossFlex Balloon Technology and Round Tip with Lesion Entry Profile of 0.018” available in diameter1.5mm-5mm and lengths in 6mm-25mm with Skive Technology on Mid shaft of Dilatation Catheter Diameter – 1.5, 2.0, 2.25, 2.5, 2.75, 3.0, 3.25, 3.5, 3.75, 4.0, 4.5, 5.0 mm Length- 6, 8, 12, 15, 20, 25
255PTCA BALLOON NON-COMPLIANT – USFDA APPROVED Multilayer and Single piece Outer member and Large Hypotube and Visible Hub Printing should have shorter deflation time and Shall come in sizes of 1.5 mm to 6 mm Diameter – 1.5, 2.0, 2.25, 2.5, 2.75, 3.0, 3.25, 3.5, 3.75, 4.0, 4.5, 5.0, 5.5, 6.0 mm Length- 6, 8, 12, 15, 20, 25
256PTCA BALLOON NON-COMPLIANT – CE/DCGI APPROVED Multilayer and Single piece Outer member and Large Hypotube and Visible Hub Printing should have shorter deflation time and Shall come in sizes of 1.5 mm to 6 mm Diameter – 1.5, 2.0, 2.25, 2.5, 2.75, 3.0, 3.25, 3.5, 3.75, 4.0, 4.5, 5.0, 5.5, 6.0 mm Length- 6, 8, 12, 15, 20, 25
257PTCA BALLOON SEMI-COMPLIANT – CE APPROVED balloon with laser bond technology on distal tip with crossing profile of 0.021” and tip entry profile of 0.017” available in diameter 2.25-5.00mm and lengths 6-30mm Diameter –2.25, 2.5, 2.75, 3.0, 3.25, 3.5, 3.75, 4.0, 4.5, 5.0 mm Length- 6, 8, 12, 15, 20, 25, 30
258PTCA BALLOON SEMI-COMPLIANT –DCGI APPROVED balloon with laser bond technology on distal tip with crossing profile of 0.021” and tip entry profile of 0.017” available in diameter 2.25-5.00mm and lengths 6-30mm Diameter –2.25, 2.5, 2.75, 3.0, 3.25, 3.5, 3.75, 4.0, 4.5, 5.0 mm Length - 6, 8, 12, 15, 20, 25, 30
259PTCA BALLOON NON-COMPLIANT – CE APPROVED non-complaint coronary balloon with Tri-fold layers and Tip Entry Profile of 0.018” available in diameter 2.0-4.5mm and lengths in 8mm-25mm Diameter –2.0, 2.25, 2.5, 2.75, 3.0, 3.25, 3.5, 3.75, 4.0, 4.5 MM Length - 8, 12, 15, 20, 25 MM
260PTCA BALLOON NON-COMPLIANT – DCGI APPROVED non-complaint coronary balloon with Tri-fold layers and Tip Entry Profile of 0.018” available in diameter 2.0-4.5mm and lengths in 8mm-25mm Diameter –2.0, 2.25, 2.5, 2.75, 3.0, 3.25, 3.5, 3.75, 4.0, 4.5 MM Length - 8, 12, 15, 20, 25 MM
261SLENDER PROFILE TAPERED TIP CTO BALLOON SEMI COMPLIANT – WITH UNIQUE DIAMETER 1MM & 6MM LENGTH – CE APPROVED Tapered fit tungsten tip with lesion entry profile of 0.0158\", with tip entry id - .0145”crossing profile of 0.021\" Must have special trifold rewrap design, with selective Hydrophilic Coating over balloon Must have flexible platinum iridium marker with tungsten tip Diameter – 1, 1.25, 1.5, 2.0, 2.25, 2.5, 2.75, 3.0, 3.25, 3.5, 3.75, 4.0, 4.5, 5.0 mm, Length – 6, 9, 12, 15, 20, 30 mm Must have nominal pressure 8 ATM, RBP -12 ATM
262TAPERED TIP NON-COMPLIANT PTCA BALLOON WITH SELECTIVE HYDROPHILIC COATING – CE APPROVED Must have tapered tungsten tip with tungsten lesion entry profile of 0.0158\", with tip entry id - .0145” crossing profile of 0.021, Must have gradient stiff shaft Must have flexible platinum iridium marker with tungsten tip Must have special trifold rewrap design, with selective Hydrophilic Coating over balloon Diameter –2.0, 2.25, 2.5, 2.75, 3.0, 3.25, 3.5, 3.75, 4.0, 4.5, 5.0 mm, Length – 6, 8, 12, 15, 20, 30 mm Must have nominal pressure 12 ATM, RBP -20 ATM
263SPHERICAL TIP NON-COMPLIANT LOLIPOP PTCA BALLOON WITH SELECTIVE HYDROPHILIC COATING – CE APPROVED Must have Spherical tungsten tip with tungsten lesion entry profile of 0.0158\", with tip entry id - .0145”crossing profile of 0.021, Must have gradient stiff shaft Must have flexible platinum iridium marker with tungsten tip Must have special trifold rewrap design, with selective Hydrophilic Coating over balloon Diameter –2.0, 2.25, 2.5, 2.75, 3.0, 3.25, 3.5, 3.75, 4.0, 4.5, 5.0 mm, Length – 6, 8, 12, 15, 20, 30 mm Must have nominal pressure 12 ATM, RBP -20 ATM
264NON-COMPLIANT PTCA BALLOON – USFDA APPROVED 0.017” lesion entry profile, crossing profile - .031, Bi-Segmen inner shaft design with Hydrophilic coating, Over-the-inner tip design, Slop outer shaft Platinum iridium marker bands, nominal pressure 12 ATM, RBP -18 ATM Diameter –2.0, 2.25, 2.5, 2.75, 3.0, 3.25, 3.5, 3.75, 4.0, 4.5, 5.0, 5.5, 6.0 mm, Length – 6, 8, 12, 15, 20, 30 mm
265NON-COMPLIANT PTCA BALLOON – CE/DCGI APPROVED 0.017” lesion entry profile, crossing profile - .031, Bi-Segmen inner shaft design with Hydrophilic coating, Over-the-inner tip design, Slop outer shaft Platinum iridium marker bands, nominal pressure 12 ATM, RBP -18 ATM Diameter –2.0, 2.25, 2.5, 2.75, 3.0, 3.25, 3.5, 3.75, 4.0, 4.5, 5.0, 5.5, 6.0 mm, Length – 6, 8, 12, 15, 20, 30 mm
266SEMI-COMPLIANT PTCA BALLOON – USFDA APPROVED 0.017” lesion entry profile, crossing profile - .026, Bi-Segmen inner shaft design with Hydrophilic coating, Unique, over-the- inner tip design: outer tip material rides over the inner shaft material, Slop outer shaft, Optileap material withZGlide hydrophilic coating Platinum iridium marker bands, nominal pressure 12 ATM, RBP -18 ATM Diameter –1.2, 1.5, 2.0, 2.25, 2.5, 2.75, 3.0, 3.25, 3.5, 3.75, 4.0, 4.5, 5.0 mm, Length – 8, 12, 15, 20, 30, 40 mm
267SEMI-COMPLIANT PTCA BALLOON – CE/DCGI APPROVED 0.017” lesion entry profile, crossing profile - .026, Bi-Segmen inner shaft design with Hydrophilic coating, Unique, over-the- inner tip design: outer tip material rides over the inner shaft material, Slop outer shaft, Optileap material withZGlide hydrophilic coating Platinum iridium marker bands, nominal pressure 12 ATM, RBP -18 ATM Diameter –1.2, 1.5, 2.0, 2.25, 2.5, 2.75, 3.0, 3.25, 3.5, 3.75, 4.0, 4.5, 5.0 mm, Length – 8, 12, 15, 20, 30, 40 mm
2686F KBT - ULTRA LOW PROFILE SEMI COMPLAINT PTCA BALLOON – MULTILAYER POLYAMIDE SANDWICH - CE APPROVED•KBT shaft compliance - Proximal - 1.73 F, Distal : 2.67 F•Ultra-low tip entry profile -.040mm - Crossing profile: 0.72 mm/0.028, rewrap profile of 1.84 mm•Soft Multi-layered Polyamide sandwich design, Trifold rewrap design with Selective hydrophilic coating at distal shaft including balloon tip, Nominal Pressure: 6 ATM, Rated Burst Pressure (RBP) - 16 ATM (14 atm for 4.5mm)•Length (mm): 9,12,15,20,25,30 Diameter(mm): 2,2.25,2.50,2.75,3.00,3.25,3.5,3.75,4.00 & 4.5 MM
2696F KBT – NON-COMPLAINT PTCA BALLOON – MULTILAYER POLYAMIDE SANDWICH - CE APPROVED KBT shaft compliance - Proximal 1.95F, Distal 2.67F Ultra-low tip entry profile -.041mm - Crossing profile: 0.72 mm/0.028, rewrap profile of 1.84 mm Soft Multi-layered Polyamide sandwich design, Trifold rewrap design with Selective hydrophilic coating at distal shaft including balloon tip, Nominal Pressure: 12 ATM, Rated Burst Pressure (RBP) - 20 ATM. Shortest Shoulder length of 2.51 mm Length (mm): 6, 8, 10,12,15,20,25,30 Diameter(mm): 2, 2.25, 2.50, 2.75, 3.00, 3.25, 3.5, 3.75, 4.00 & 4.5 MM
270THINNEST WALL 0.08 SEMI COMPLIANT BALLOON – LONG LENGTH– CE APPROVED NP -6 ATM, RBP – 18 ATM, Crossing profile .65 Diameter – 1.25, 1.5, 2.0, 2.25, 2.50, 2.75, 3.00, 3.25, 3.5, 4.00 & 4.5 MM Length –10,12,15,20,25,30, 35, 40
271ANGLED SHOULDER NON-COMPLIANT BALLOON – LONG LENGTH– CE APPROVED Angled shoulder balloon with Trifold design, polyamide dual layer, NP -8 ATM, RBP – 20 ATM, Entry profile -0.016,Crossing profile .70 Diameter – 1.25, 1.5, 2.0, 2.25, 2.50, 2.75, 3.00, 3.25, 3.5, 4.00 & 4.5 MM Length –10,12,15,20,25,30, 35, 40
272PTCA SCORING BALLOON – NITINOL HELICAL SHAPED SCORING ELEMENT – USFDA APPROVED Tapered tip and three nitinol, helical shaped, electropolished scoring elements with rectangular edges, mounted on a balloon with a larger working range of 2 ATM - 20 ATM Lesion entry profile .0172, hydrophilic coating, Laser cut hypotube, NP – 8 ATM, RBP – 16 ATM Diameter -2.0mm, 2.5mm, 3.0mm, 3.5mm lengths - 6mm, 10mm & 15mm, 20mm
273PTCA SCORING BALLOON – NITINOL HELICAL SHAPED SCORING ELEMENT – CE/DCGI APPROVED Tapered tip and three nitinol, helical shaped, electropolished scoring elements with rectangular edges, mounted on a balloon with a larger working range of 2 ATM - 20 ATM Lesion entry profile .0172, hydrophilic coating, Laser cut hypotube, NP – 8 ATM, RBP – 16 ATM Diameter -2.0mm, 2.5mm, 3.0mm, 3.5mm lengths - 6mm, 10mm & 15mm, 20mm
274PTCA SCORING BALLOON – TRIPLE TRIANGULAR MICROTOME – PMDA APPROVED Scoring Balloon with triple triangular nylon microtomes 0.0155” in height with 120-degree angle between them. An entry profile of O.0167 inch with 2.2Fr proximal shaft and 2.6F distal shaft. NP-14 ATM RBP of 24 ATM Diameter -2.0mm, 2.25mm, 2.5mm, 2.75mm, 3.0mm, 3.25mm, 3.5mm, 4.0mm. Length – 13 mm
275PTCA SCORING BALLOON NON-COMPLIANT – HIGH PRESURE - SINGLE WIRE – USFDA APPROVED Scoring Balloon with single wire element, Tip length – 10mm, crossing profile .0350”. Slider Hydrophilic Catheter and silicon coated lumen. An entry profile of O.0167 inch with 2Fr proximal shaft and 3F distal shaft. NP-12 ATM RBP of 22 ATM, Average burst pressure – 30ATM Diameter -2.0mm, 2.25mm, 2.5mm, 2.75mm, 3.0mm, 3.25mm, 3.5mm, 3.75mm, 4.0mm. Length – 6, 8, 10, 12, 15, 18, 20, 23, 25, 30 mm
276PTCA SCORING BALLOON NON-COMPLIANT – HIGH PRESURE - SINGLE WIRE – CE/DCGI APPROVED Scoring Balloon with single wire element, Tip length – 10mm, crossing profile .0350”. Slider Hydrophilic Catheter and silicon coated lumen. An entry profile of O.0167 inch with 2Fr proximal shaft and 3F distal shaft. NP-12 ATM RBP of 22 ATM, Average burst pressure – 30ATM Diameter -2.0mm, 2.25mm, 2.5mm, 2.75mm, 3.0mm, 3.25mm, 3.5mm, 3.75mm, 4.0mm. Length – 6, 8, 10, 12, 15, 18, 20, 23, 25, 30 mm
277PTCA CUTTING BALLOON – USFDA Approved Bumper Tip, Acrylated urethane atherotome adhesive, Atherotomes , Z-Glide™ Hydrophilic Coating Diameter -2.0mm, 2.25mm, 2.5mm, 2.75mm, 3.0mm, 3.25mm, 3.5mm, 3.75mm, 4.0mm. Blade Length – 6, 10, 15 mm
278PTCA CUTTING BALLOON – CE/DCGI Approved Bumper Tip, Acrylated urethane atherotome adhesive, Atherotomes , Z-Glide™ Hydrophilic Coating Diameter -2.0mm, 2.25mm, 2.5mm, 2.75mm, 3.0mm, 3.25mm, 3.5mm, 3.75mm, 4.0mm. Blade Length – 6, 10, 15 mm
279Triploblastic coated DRUG ELUTING PTCA BALLOON - CE/DCGI Approved Must have optimum concentration of sirolimus – 2.75ug/mm Diameter – 2 - 4mm, Length - 10 – 30mm Must have nominal pressure 8ATM, RBP-16ATM
280DURG ELUTING PTA BALLOON FOR BELOW THE KNEE PERIPHERAL ARTERY-DCGI APPROVEDPaclitaxel Drug-Coated PTA Balloon Recommended guide wire- OTW (BTK): 0.018\" Length (mm): 80,100,120 & 150Diameter (mm): 2,2.5,3 & 4Recommended guide wire- OTW (SFA): 0.035\" Length (mm): 100,120 & 150Diameter (mm): 5,6 & 7
281DRUG ELUTING PTCA BALLOON- US FDA APPROVED All types & sizes Different types of drugs
282DRUG ELUTING PTCA BALLOON- CE APPROVED All types & sizes Different types of drugs
283DRUG ELUTING PTCA BALLOON- DCGI APPROVED All types & sizes Different types of drugs
284BALLOON DILATATION CATHETER FOR AORTA & IVC- US FDA APPROVEDMonorail (rapid exchange) and over-the-wire (OTW) balloonsAvailable in the sizes and lengths
285BALLOON DILATATION CATHETER FOR AORTA & IVC- CE APPROVEDMonorail (rapid exchange) and over-the-wire (OTW) balloonsAvailable in the sizes and lengths
286BALLOON DILATATION CATHETER FOR AORTA & IVC- DCGI APPROVEDMonorail (rapid exchange) and over-the-wire (OTW) balloonsAvailable in the sizes and lengths
287BIB (BALLOON IN BALLOON) TYPE BALLOONS FOR COARCTATION DILATATION - US FDA APPROVEDMonorail (rapid exchange) and over-the-wire (OTW) balloonsAvailable in the sizes and lengths
288BIB (BALLOON IN BALLOON) TYPE BALLOONS FOR COARCTATION DILATATION - CE APPROVEDMonorail (rapid exchange) and over-the-wire (OTW) balloonsAvailable in the sizes and lengths
289BIB (BALLOON IN BALLOON) TYPE BALLOONS FOR COARCTATION DILATATION - DCGI APPROVEDMonorail (rapid exchange) and over-the-wire (OTW) balloonsAvailable in the sizes and lengths
290Z MED TYPE BALLOON FOR AORTIC COACTATION – US FDA/CE APPROVED5 to 20 cm diameter in all sizesOtw / Rapid exchange, compatible with 0.014”/0.035” and 0.038” wire
291Z MED TYPE BALLOON FOR AORTIC COACTATION – DCGI APPROVED5 to 20 cm diameter in all sizesOtw / Rapid exchange, compatible with 0.014”/0.035” and 0.038” wire
292Z MED TYPE BALLOON FOR AORTIC COACTATION – US FDA/CE APPROVEDMore than 20 cm diameter in all sizesOtw / Rapid exchange, compatible with 0.014”/0.035” and 0.038” wire
293Z MED TYPE BALLOON FOR AORTIC COACTATION – DCGI APPROVEDMore than 20 cm diameter in all sizesOtw / Rapid exchange, compatible with 0.014”/0.035” and 0.038” wire
294PROXIMAL OPTIMIZATION BALLOON – USFDA APPROVED Specialised proximal optimisation balloon dilatation catheter with ultra short balloon shoulder of 0.6mm and an RBP of 22atm with sizes ranging from a length of 6-15 mm and diameters ranging from 2.25-5 mm. Hydrophilic external surface coating from tip to adjacent guidewire port and silicone coating inside guidewire lumen.
295PROXIMAL OPTIMIZATION BALLOON – CE/DCGI APPROVED Specialised proximal optimisation balloon dilatation catheter with ultra short balloon shoulder of 0.6mm and an RBP of 22 atm with sizes ranging from a length of 6-15 mm and diameters ranging from 2.25-5 mm. Hydrophilic external surface coating from tip to adjacent guidewire port and silicone coating inside guidewire lumen.
296PTCA HIGH PRESSURE CTO BALLOON – USFDA APPROVED 0.75 mm CTO balloon with a tip entry profile of 0.015” and ultra low crossing profile of 0.020” with a proprietary distal welding technology, 2.2F distal shaft, Rated Burst Pressure of 20 ATM and Average Burst Pressure of ≥ 28 ATM. Diameters from 0.75mm, 1.0mm, 1.25mm, 1.50mm, 1.75mm & 2.0mm lengths from 5mm, 8mm, 10mm, 15mm, 20mm, 25mm & 30mm.
297PTCA HIGH PRESSURE CTO BALLOON – CE/DCGI APPROVED 0.75 mm CTO balloon with a tip entry profile of 0.015” and ultra-low crossing profile of 0.020” with a proprietary distal welding technology, 2.2F distal shaft, Rated Burst Pressure of 20 ATM and Average Burst Pressure of ≥ 28 ATM. Diameters from 0.75mm, 1.0mm, 1.25mm, 1.50mm, 1.75mm & 2.0mm lengths from 5mm, 8mm, 10mm, 15mm, 20mm, 25mm & 30mm.
298ROTALINK BURR - US FDA APPROVED (Compatible with existing Rota Machine Cath Lab GMC Kots).
299ROTALINK BURR – DCGI APPROVED (Compatible with existing Rota Machine Cath Lab GMC Kota).
300ROTALINK ADVANCER - US FDA APPROVED (Compatible with existing Rota Machine Cath Lab GMC Kota).
301ROTALINK ADVANCER - CE APPROVED (Compatible with existing Rota Machine Cath Lab GMC Kota).
302ROTALINK ADVANCER – DCGI APPROVED (Compatible with existing Rota Machine Cath Lab GMC Kota).
303ROTALINK PLUS (ADVANCER & BURR) - US FDA APPROVED (Compatible with existing Rota Machine Cath Lab GMC Kota ).
304ROTALINK PLUS (ADVANCER & BURR) - CE APPROVED (Compatible with existing Rota Machine Cath Lab GMC Kota
305ROTALINK PLUS (ADVANCER AND BURR) – DCGI APPROVED (Compatible with existing Rota Machine Cath Lab GMC Kota
306ROTATIONAL ATHERECTOMY GUIDE WIRES - US FDA APPROVED
307ROTATIONAL ATHERECTOMY GUIDE WIRES - CE APPROVED
308ROTATIONAL ATHERECTOMY GUIDE WIRES –DCGI APPROVED
309ROTAGLIDE LUBRICANT - US FDA APPROVED
310ROTAGLIDE LUBRICANT - CE APPROVED
311ROTAGLIDE LUBRICANT – DCGI APPROVED
312ROTAWIRE – US FDA APPROVEDShould be compatible to Rota Machine in Cath Lab GMC Kota
313ROTAWIRE – DCGIAPPROVEDShould be compatible to Rota Machine in Cath Lab GMC Kota.
314HEART PUMP CATHETER AND SMARTASSIST SENSOR USFDA & CE approved percutaneous heart pump capable of pumping blood @ 3.5-5 L/min to provide hemodynamic support for hemodynamic stabilization to enable Heart Recovery. Maintain patient hemodynamics during plannedtemporary coronary occlusions by maintaining mean arterial pressure (MAP), which may allow for a more thorough procedure and a more complete revisualization ma single session.
315NIRS+IVUS CATHETER USFDA & JAPAN PMDA APPROVED Near infrared spectroscopy & Intravascular Imaging catheter for detection of Lipid Core Plaques (LCP) and assessment of vessel structure with an automatically adjustable frequency bandwidth of 35-65 MHz depending on the need of the calcium with a pullback speed upto 2mm/sec and a pullback length if 150mm. Catheter working length of 160 cm
316IVUS CATHETER WITH ACCESSORIES - USFDA APPROVED COMPITABLE TO VOLCANO IMAGING MACHINE IN CATH LAB, Govt.MedicalCollege Kota-
317IVUS CATHETER WITH ACCESSORIES - CE/DCGI APPROVED COMPITABLE TO VOLCANO IMAGING MACHINE IN CATH LAB, Govt.MedicalCollege Kota-
318SHOCKWAVE I.V.L INTRAVASCULARLITHOTRIPSY CATHETER SYSTEM WITH CONNECTOR CABLE - DCGI WITH US FDA / CE APPROVED
319I.V.L INDEGENOUS INTRAVASCULARLITHOTRIPSY CATHETER SYSTEM WITH CONNECTOR CABLE – DCGI
320IVUS CATHETER HD 60 MHZ CORONARY IMAGING CATHETERS. - US FDA APPROVEDSHOULD BE COMPATIBLE WITH AVAILABLE MACHINE
321IVUS CATHETER HD 60 MHz Coronary Imaging Catheters. – CE/DCGI APPROVEDShould be compatible with available machine
322IVUS CATHETER40 MHz Coronary Imaging Catheters. - US FDA APPROVEDShould be compatible with available machine
323IVUS CATHETER40 MHz Coronary Imaging Catheters. - US FDA APPROVEDShould be compatible with available machine
324LASER ATHERECTOMY CATHETERX-80 catheters with guidewire compatanility of 0.014 inch , Guiding catheter compatability of 6F, Maximum tip outer diameter ofm0.038inch , Maximum Shaft outer diameter of 0.049 inchwith a working length of 100 mm , capability to generate a fluence of 30- 80 mJ/mm2 with a repitation rate of 25-80 Hertz. Available in 0.9 mm and 1.4 mm sizes.
325Fractional Flow reserve Pressure Wire1. Shouldbe0.014”guidewire.2. Should have high-fidelity piezo electric pressure sensor technology for measurement of intravascular pressure.3. The system should work wireless radio using Frequency-hopping spread spectrum to ensure secured radio connection with pressurewire4. ThePressureWireshouldbecapableofwiredconnectiontoFFRmachine.5. Shouldhavesensorhousingdesignwithmultiplelargewindows(Multiwindow Jacket).6. Shouldhaveaflatcoretipdesignforabettershapeability&shaperetention.7. Shouldpreferablyhavehydrophiliccoating8. Shouldhavearadioopaquetip.9. Shouldhaveoperatingpressurerangeof-30to+300mmHg.10.Should have frequency response of DC to 25 Hz.11.Should have radio range of at least 2m.12.Should have Battery time of transmitter for at least 3 hours.13.Should have a wireless transmission frequency range of 2.4000 – 2.4835 GHz
326OCT Catheter:Catheter for intracoronary OCT, 0.014\" guidewire and 6 F guide catheter compatibility. Lubricous hydrophilic coating and low tip entry profile for crossing tight, distal lesions.2.7 F crossing profile and supportive proximal shaft provide superb deliverability to the area of interest. Lens marker is immediately proximal to imaging lens and the distance of lens marker from tip should be 23 mm and proximal marker at 82 mm from the lens marker.Threeradiopaque marker
327TEMPORARY BIPOLAR PACING CATHETER- FLOW DIRECTED1. Should be US FDA & DCGI approved2. Should be latex balloon tipped, flow guided for stable insertion.3. Should have 10 cm depth markers to enhance placement.4. Should have smooth, polyurethane hemocompatible coating.5. Should have clearly marked terminals.6. Should have shrouded 2 mm pin connector leads.7. Should have platinum electrodes8. It should have flexible tip design for delicate placement.
328TEMPORARY BIPOLAR PACING CATHETER- TORQUE CONTROL1. Should be US FDA & DCGI approved2. Should have 10 cm depth markers to enhance placement.3. Should have smooth, polyurethane hemocompatible coating.4. Should have clearly marked terminals.5. Should have shrouded 2 mm pin connector leads.6. Should have stainless steel centre conductor and stainless steel electrodes.7. It should have solid core enables user to customize the curve.8. Should have optimal torque control for challenging anatomy
329ORBITAL ATHERECTOMY DEVICE6F compatible Orbital Atherectomy device with 1.25mm diamond coated crown designed for bidirectional superficial calcium sanding and modify deep calcium through pulsatile forces to facilitates stent delivery and expansion in severely calcified lesions with durable nitinol guidewire with 0.12” proximal and 0.14” distal end along with viper slide lubricant
330OAS Pump provides the saline pumping mechanism and power to the OAD with 250 V 4A SLOW BLOW, 1/4” x 1 - 1¼” meter fuse, ABS Plastic external housing, (100–240 VAC @ 50–60 Hz) external connector. Includes a bult in audible information signal for approximately every 25 sec of OAD spin time. Audible information signal every 5 sec for a total of 30 sec when the saline level falls below 200 mL.during a treatment period. The small, reusable, and portable OAS pump attaches to a standard five-wheel rollingintravenous (IV) pole or table mount pole.
331Pressure Wire for FFR/DFR – USFDA
332Pressure Wire for FFR/DFR – CE/DCGI
333IABP CATHETER WITH ACCESSORIES - US FDA APPROVEDShould be compatible with existing machine (Data Scope) in Cath Lab, GMCK
334IABP CATHETER WITH ACCESSORIES - CE APPROVEDShould be compatible with existing machine (Data Scope) in Cath Lab, GMCK
335IABP CATHETER WITH ACCESSORIES DCGI APPROVEDShould be compatible with existing machine (Data Scope) in Cath Lab, GMCK
336TPI LEAD – USFDA APPROVED
337TPI LEAD – CE APPROVED
338TPI LEAD – DCGI APPROVED
339Vascular closure device with Bio absorbable PGA suture that provide a secure seal•Bioabsorbable collagen designed,•low profile Bioabsorbable Anchor (50:50 blend glycolide and lactide polyer)•Must have bovine collagen plug. Must have 9 hole V-twist pattern suture weave.•Must be available in 6F and 8F sizes. USFDA+PMDA Approved
340Vascular closure device with Bio absorbable PGA suture that provide a secure seal•Bioabsorbable collagen designed,•low profile Bioabsorbable Anchor (50:50 blend glycolide and lactide polyer)•Must have bovine collagen plug. Must have 9-hole V-twist pattern suture weave.•Must be available in 6F and 8F sizes. CE/DCGI Approved
341EVEROLIMUS ELUTING COBALT CHROMIUM STENT – USFDA APPROVED Everolimus eluting cobalt chromium stent with peak to valleynon-linear links with narrower and slimmer crests and ultra- low crossing profile of 0.039 inches for precise placement and zero transition distal shaft. Should have flourinated co- polymer. Should come in diameters from 2.00 mm to 4.00 mm with 5.5 mm post-dilatation capability for 3.5 mm and 4.0 mmstents
342EVEROLIMUS ELUTING COBALT CHROMIUM STENT – CE/DCGI APPROVED Everolimus eluting cobalt chromium stent with peak to valley non linear links with narrower and slimmer crests and ultra-lowcrossing profile of 0.039 inches for precise placement and zero transition distal shaft. Should have flourinated co-polymer. Should come in diameters from 2.00 mm to 4.00 mm with 5.5 mm post-dilatation capability for 3.5 mm and 4.0 mm stents
343EVEROLIMUS ELUTING COBALT CHROMIUM STENT – USFDA APPROVED everolimus eluting cobalt chromium stent with peak to valley taller non linear links and true centre tip technology for precise placement and zero transition distal shaft. Should have flourinated co-polymer. Should come in diameters from 2.00 mm to4.00 mm
344EVEROLIMUS ELUTING COBALT CHROMIUM STENT – CE/DCGI APPROVED everolimus eluting cobalt chromium stent with peak to valley taller non linear links and true centre tip technology for preciseplacement and zero transition distal shaft. Should have flourinated co-polymer. Should come in diameters from 2.00 mm to4.00 mm
345EVEROLIMUS ELUTING COBALT CHROMIUM STENT – USFDA APPROVED Everolimus eluting cobalt chromium stent with peak to valley taller non linear links and 5 Fold balloon technology and should have flourinated co polymer. Skive technology to have a better pushability. Should come in diameters from 2.00 mm to 4.00 mm.
346EVEROLIMUS ELUTING COBALT CHROMIUM STENT – CE/DCGI APPROVED Everolimus eluting cobalt chromium stent with peak to valley taller non linear links and 5 Fold balloon technology and should have flourinated co polymer. Skive technology to have a better pushability. Should come in diameters from 2.00 mm to 4.00mm.
347EVEROLIMUS ELUTING COBALT CHROMIUM STENT – LOGN LENGTH USFDA APPROVED everolimus eluting cobalt chromium stent with peak to valley taller non linear links and 5 Fold balloon technology and should have flourinated co polymer. Skive technology to have a better pushability. Should come in diameters from 2.00 mm to 4.00 mm upto 48 mm length.
348EVEROLIMUS ELUTING COBALT CHROMIUM STENT – LOGN LENGTH - CE APPROVED everolimus eluting cobalt chromium stent with peak to valley taller non linear links and 5 Fold balloon technology and should have flourinated co polymer. Skive technology to have a better pushability. Should come in diameters from 2.00 mm to 4.00mm upto 48 mm length.
349EVEROLIMUS ELUTING COBALT CHROMIUM STENT – USFDA APPROVED USFDA approved everolimus eluting cobalt chromium stent with peak to valley taller non linear links and dual layer pebax balloon technology and should have flourinated co polymer. SS junction support mandrel to have a better pushability. Shouldcome in diameters from 2.00 mm to 4.00 mm.
350EVEROLIMUS ELUTING COBALT CHROMIUM STENT – CE/DCGI APPROVED USFDA approved everolimus eluting cobalt chromium stent with peak to valley taller non linear links and dual layer pebax balloon technology and should have flourinated co polymer. SS junction support mandrel to have a better pushability. Should come in diameters from 2.00 mm to 4.00 mm.
351EVEROLIMUS ELUTING PLATINUM CHROMIUM STENT - DURABLE POLYMER– USFDA APPROVED
352EVEROLIMUS ELUTING PLATINUM CHROMIUM STENT - DURABLE POLYMER – CE/DCGI APPROVED
353EVEROLIMUS ELUTING PLATINUM CHROMIUM STENT – BIODEGRADABLE POLYMER - CE/DCGI APPROVED
354EVEROLIMUS ELUTING PLATINUM CHROMIUM STENT – BIODEGRADABLE POLYMER -CE/DCGI APPROVED
355Sirolimus Eluting Cobalt-Chromium stent with Abluminal Gradient coating - (L-605 Co-Cr Alloy) – USFDA/PMDA (should not have drug & Polymer coating on joints & Bends). 2 links – 8 Crown Design•Bioresorbable polymer of PLCL (Poly Lactic Acid + Poly Capro lactone PCL) with degradation time of 3-4 months. Should have Bioinspired Open cell in phase design.•Low concentration of Sirolimus (0.8ug/mmsq).•minimum tip entry profile of 0.42mm
356Sirolimus Eluting Cobalt-Chromium stent with Abluminal Gradient coating - (L-605 Co-Cr Alloy) – CE/DCGI (should not have drug & Polymer coating on joints & Bends). 2 links – 8 Crown Design•Bioresorbable polymer of PLCL (Poly Lactic Acid + Poly Capro lactone PCL) with degradation time of 3-4 months. Should have Bioinspired Open cell in phase design.•Low concentration of Sirolimus (0.8ug/mmsq). minimum tip entry profile of 0.42mm
357Optimized overexpansion, up to 6.25 mm for large Vessel- Sirolimus Eluting Cobalt-Chromium stent with Advanced Core wire shaft technology & Abluminal Gradient coating - (L-605 Co-Cr Alloy) – USFDA/PMDA should not have drug & Polymer coating on joints & Bends. 2 links – 8 & 10 Crown Design Must Have Advanced Core wire shaft technology. should have an over expansion Limit of more than 1.5 mm of the stated Diameter Must Have Rounded & Flexible Tip made up of Polyamide Elastomer. Bioresorbable polymer of PLCL (Poly Lactic Acid + Poly Caprolactone PCL) with degradation time of 3-4 months. Should have Bioinspired Open cell in phase design.Low concentration of Sirolimus (0.8ug/mmsq), tip entry profile of 0.42mm.
358Optimized overexpansion, up to 6.25 mm for large Vessel- Sirolimus Eluting Cobalt-Chromium stent with Advanced Core wire shaft technology & Abluminal Gradient coating - (L-605 Co-Cr Alloy) – CE/DCGI should not have drug & Polymer coating on joints & Bends. 2 links – 8 & 10 Crown Design Must Have Advanced Core wire shaft technology. should have an over expansion Limit of more than 1.5 mm of the stated Diameter Must Have Rounded & Flexible Tip made up of Polyamide Elastomer. Bioresorbable polymer of PLCL (Poly Lactic Acid + Poly Caprolactone PCL) with degradation time of 3-4 months. Should have Bioinspired Open cell in phase design.Low concentration of Sirolimus (0.8ug/mmsq), tip entry profile of 0.42mm.
359SIROLIMUS ELUTING WITH PROBIO COATING STENT – USFDA APPROVEDSirolimus Eluting Cobalt chromium stents, ultrathin struts 60 um. Should have coating passive probio coating (Amorphous Silicon Carbide). Should have active coating bio lute bioabsorbable ploy-L-Lactide. Should be USFDA approved.
360SIROLIMUS ELUTING WITH PROBIO COATING STENT – CE/DCGI APPROVEDSirolimus Eluting Cobalt chromium stents, ultrathin struts 60 um. Should have coating passive probio coating (Amorphous Silicon Carbide). Should have active coating bio lute bioabsorbable ploy-L-Lactide. Should be USFDA approved.
361SIROLIMUS ELUTING WITH SILICON CARBIDE COATING STENT – USFDA APPROVEDSirolimus eluting cobalt chromium stents with amorphous silicon carbide coating. Should be USFDA approved.
362SIROLIMUS COATED STAINLESS STEEL STENT – CE APPROVEDPorus Surface, Shellac Resin (Wax-free), Bioresorbable Polymer
363SIROLIMUS ELUTING COBALT CHROMIUM PLATFORM, - US FDA / CE Approved BIODEGRADABLE POLYMER, AND MICROPORUS SURFACE WITH SOFT COATING OF SHELLAC RASIN.
364SIROLIMUS CLUTING, STAINLESS STEEL PLATFORM, - US FDA / CE Approved BIODEGRADABLE POLYMER, MICROPORUS SURFACEWITH SOFT COATING OF SHELLAC RASIN WITH TEMPERATURE CONTROL PACKING & TEMPERATURE SENSITIVE CHECK METER.
365DUAL DRUG POLYMER FREE DRUG ELUTING STENT - DCGI WITH US FDA /CE APPROVED Should have Cobalt Chromium Platform with Prubocol drug at place of polymer. Should have no polymer. Abluminal coating on MICROPORUS SURFACE WITH SOFT COATING OF SHELLAC RASIN.
366DUAL DRUG POLYMER FREE DRUG ELUTING STENT - DCGI APPROVED Should have Cobalt Chromium Platform with Prubocol drug at place of polymer. Should have no polymer.Abluminal coating on MICROPORUS SURFACE WITH SOFT COATING OF SHELLAC RASIN.
367BIO-RESORBABLE SCAFFOLD (BRS) Sirolimus eluting Bio-Resorable scaffold Stent System - DCGI With US FDA / CE Approved All Sizes and Diameter
368SIROLIMUS COATED DRUG STENT - CE APPROVED• Open Cell Design only with two connectors between the rings, Stent material: CoCr per ASTM F562• 60µ ultra-thin struts across all diameters and lengths• Crossing profile of ≤ 0.97MM Tip entry profile: 0.017”, LDZ Link: Long Dual ‘Z’ Link• RBP: 16 atm • Length (mm): 8 to 48 mm• Diameter(mm): 2.25 to 4.00 mm
369SIROLIMUS COATED DRUG STENT - DCGI APPROVED• Open Cell Design only with two connectors between the rings, Stent material: CoCr per ASTM F562• 60µ ultra-thin struts across all diameters and lengths• Crossing profile of ≤ 0.97MM Tip entry profile: 0.017”, LDZ Link: Long Dual ‘Z’ Link• RBP: 16 atm• Length (mm): 8 to 48 mm• Diameter(mm): 2.25 to 4.00 mm
370EVEROLIMUS COATED DRUG ELUTING COBALT CHROMIUM CORONARY STENT - DCGI APPROVED• Everolimus Drug Eluting Stent, Open Cell Design only with two connectors between the rings• Stent Material & Design: L-605 Co-Cr Alloy with Laser cut seamless tubing in serpentine pattern.• 60µ ultra-thin struts across all diameters and lengths, Crossing profile of ≤ 0.97mm, Tip entry profile: 0.017”• LDZ Link: Long Dual ‘Z’ LinK, IFU labeled Overexpansion of the highest available diameter should be ≥ 5.50 mm• RBP: 16 atm• Length (mm): 8 to 48 mm• Diameter(mm): 2.25 to 4.00 mm
371SIROLIMUS COATED DRUG STENT CE APPROVED• Open Cell Design only with two connectors between the rings• Stent Material & Design: L-605 Co-Cr Alloy with Laser cut seamless tubing in serpentine pattern.• 60µ ultra-thin struts across all diameters and lengths -Long Link DESIGN• Crossing profile of ≤ 0.97mm,M Tip entry profile: 0.41mm• RBP: 16 atm• Length (mm): 8 to 48 mm• Diameter(mm): 2.25 to 4.00 mm
372SIROLIMUS COATED DRUG STENT DCGI APPROVED• Open Cell Design only with two connectors between the rings• Stent Material & Design: L-605 Co-Cr Alloy with Laser cut seamless tubing in serpentine pattern.• 60µ ultra-thin struts across all diameters and lengths -Long Link DESIGN• Crossing profile of ≤ 0.97mm,M Tip entry profile: 0.41mm• RBP: 16 atm• Length (mm): 8 to 48 mm• Diameter(mm): 2.25 to 4.00 mm
373COVERED STENT USFDA APPROVED
374COVERED STENT CE/DCGI APPROVED
375COVERED CORONARY STENTS - US FDA APPROVED
376COVERED CORONARY STENTS – CE/DCGI APPROVEDCovered graft stent for dissected artery
377GUIDEWIRE FOR PERIPHERAL INTERVENTION – NITINOL ALLOY REGULAR LENGTH Tip Load Options of 6 g, nitinol lengths of 10 cm
378GUIDEWIRE FOR PERIPHERAL INTERVENTION – NITINOL ALLOY REGULAR LENGTH Tip Load Options of 4 g, nitinol lengths of 25 cm
379GUIDEWIRE FOR PERIPHERAL INTERVENTION – NITINOL ALLOY REGULAR LENGTH– Tip Load Options of 3.5 g, nitinol lengths of 40 cm
380GUIDEWIRE FOR PERIPHERAL INTERVENTION – NITINOL ALLOY REGULAR LENGTH– Tip Load Options of 2.8 g, nitinol lengths of 40 cm
381GUIDEWIRE FOR PERIPHERAL INTERVENTION – STAINLESS STEEL, REGULAR LENGTH .018Short taper, Bare coil, core to tip, tip load – 4.6 gm
382PTA BALLOON – 12-200MM - USFDA diameters 1.5, 2.0, 2.5, 3.0, and 4.0 mm, Length – 12, 20, 40, 60, 80, 120, 200 4F sheath compatible, Hydrophilic coating, tungsten markers, NP- 8, RBP - 14
383PTA BALLOON - 12-200MM – CE/DCGI diameters 1.5, 2.0, 2.5, 3.0, and 4.0 mm, Length – 12, 20, 40, 60, 80, 120, 200 4F sheath compatible, Hydrophilic coating, tungsten markers, NP- 8, RBP - 14
384PTA BALLOON – 20-200MM - USFDA APPROVED diameters 2.0, 2.5, 3.0, 4.0, 5.0, 5.5, 6.0, Length – 20, 40, 60, 80, 120, 150, 180, 200 4F/5F sheath compatible, Hydrophilic coating, tungsten markers, NP- 8, RBP – 14 Coaxial, over-the-wire design,One-piece catheter construction,Hydrophobic coating
385PTA BALLOON – 20-200MM CE/DCGI diameters 2.0, 2.5, 3.0, 4.0, 5.0, 5.5, 6.0, Length – 20, 40, 60, 80, 120, 150, 180, 200 4F/5F sheath compatible, Hydrophilic coating, tungsten markers, NP- 8, RBP – 14 Coaxial, over-the-wire design,One-piece catheter construction,Hydrophobic coating
386PTA BALLOON – 20-250MM - USFDA diameters 3 -12 MM, Length – 20, 40, 60, 80, 120, 150, 200, 250 5-7 F sheath compatible, Hydrophilic coating, tungsten markers,
387PTA BALLOON – 20-250MM – CE/DCGI diameters 3 -12 MM, Length – 20, 40, 60, 80, 120, 150, 200, 250 5-7 F sheath compatible, Hydrophilic coating, tungsten markers,
388PTA BALLOON – 15-40MM – USFDA diameters 4 -7 MM, lengths of 15 mm, 20 mm, 30 mm, and 40 mm XCELON balloon material with a 14 atm RBP,Hydrophobic coated shaft and balloon,NP- 8, RBP – 14
389PTA BALLOON – 15-40MM – CE/DCGI diameters 4 -7 MM, lengths of 15 mm, 20 mm, 30 mm, and 40 mmXCELON balloon material with a 14 atm RBP,Hydrophobic coated shaft and balloon,NP- 8, RBP – 14
390PTA BALLOON DILATATION CATHETER – USFDA diameters 3 -12 MM, Length – 20, 30, 40, 60, 80, 100, 120, 150, 200 - Up to 24 ATM (2431 kPa) rated burst pressure NyBax Balloon Material, 3 wings on 3-5 mm, 5 wings on 6 mm and plus, Mediglide hydrophilic coating
391PTA BALLOON DILATATION CATHETER – CE/DCGI diameters 3 -12 MM, Length – 20, 30, 40, 60, 80, 100, 120, 150, 200 Up to 24 ATM (2431 kPa) rated burst pressureNyBax Balloon Material, 3 wings on 3-5 mm, 5 wings on 6 mm and plus, Mediglide hydrophilic coating
392ULTRA-HIGH-PRESSURE BALLOON -With pressures up to 40 ATM - USFDA diameters 4 -12 MM, Length – 20, 30, 40, 60, 80, 100 - Up to 40 ATMrated burst pressure
393ULTRA-HIGH-PRESSURE BALLOON -With pressures up to 40 ATM -CE/DCGI diameters 4 -12 MM, Length – 20, 30, 40, 60, 80, 100 Up to 40 ATMrated burst pressure
3940.018” BALLOON DILATATION CATHETER - USFDA 0.020” lesion entry profile on a 0.018” wire 2-10 mm diameters, 10-220 mm lengths
3950.018” BALLOON DILATATION CATHETER -CE/DCGI 0.020” lesion entry profile on a 0.018” wire 2-10 mm diameters, 10-220 mm lengths
3960.035” BALLOON DILATATION CATHETER -USFDA 0.020” lesion entry profile on a 0.018” wire 12, 14, 16, 18 mm diameters, 20, 40, 60 mm lengths
3970.035” BALLOON DILATATION CATHETER -CE/DCGI 0.020” lesion entry profile on a 0.018” wire 12, 14, 16, 18 mm diameters, 20, 40, 60 mm lengths
3980.014” BALLOON DILATATION CATHETER -USFDA 0.017\" lesion entry profile, NyBax Balloon Material
3990.014” BALLOON DILATATION CATHETER -CE/DCGI0.017\" lesion entry profile, NyBax Balloon Material
400CUTTING BALLOON FOR RENAL AND PERIPHERAL ARTERIES - US FDA APPROVEDMonorail (rapid exchange) and over-the-wire (OTW) balloonsAvailable in the sizes and lengths
401CUTTING BALLOON FOR RENAL AND PERIPHERAL ARTERIES - CE APPROVEDMonorail (rapid exchange) and over-the-wire (OTW) balloonsAvailable in the sizes and lengths
402CUTTING BALLOON FOR RENAL AND PERIPHERAL ARTERIES - DCGI APPROVEDMonorail (rapid exchange) and over-the-wire (OTW) balloonsAvailable in the sizes and lengths
403OTW BALLOON FOR PERIFERAL ANGIOPLASTY ALL SIZE AND DIAMETERS- CE/ FDA APPROVED
404OTW BALLOON FOR PERIFERAL ANGIOPLASTY ALL SIZE AND DIAMETERS- DCGI APPROVED
405BTK EVEROLIMUS ELUTING RESORBABLE SCAFFOLD SYSTEM – USFDA
406BTK EVEROLIMUS ELUTING RESORBABLE SCAFFOLD SYSTEM – CE/DCGI
407PERIPHERAL SELF EXPANDABLE INTERWOVEN NITINOL STENT FORSUPERFICIAL FEMORAL ARTERY (SFA) AND / OR PROXIMAL POPLITEAL ARTERY- USFDA APPROVED
408PERIPHERAL SELF EXPANDABLE INTERWOVEN NITINOL STENT FORSUPERFICIAL FEMORAL ARTERY (SFA) AND / OR PROXIMAL POPLITEAL ARTERY- DCGI/CE APPROVED
409SELF-EXPANDING PERIPHERAL STENT – USFDA Approved Tri-Axial Technology Specifications, Flexible nitinol material
410SELF-EXPANDING PERIPHERAL STENT – CE/DCGI Approved Tri-Axial Technology Specifications, Flexible nitinol material
411BALLOON-EXPANDING PERIPHERAL STENT – USFDA Approved Cobalt chromium multi-link technology, Dual-layer balloon
412BALLOON-EXPANDING PERIPHERAL STENT – USFDA Approved Cobalt chromium multi-link technology, Dual-layer balloon
413RENAL STENT SYSTEM – USFDA APPROVED Cobalt chromium multi-link technology
414RENAL STENT SYSTEM – CE/DCGI APPROVEDCobalt chromium multi-link technology
415CAROTID STENT – USFDA Closed-cell design for crush resistance,Rotational deployment handle with Freestyle,U- and S-shaped connectors
416CAROTID STENT – CE/DCGI Closed-cell design for crush resistance,Rotational deployment handle with Freestyle,U- and S-shaped connectors
417CAROTID STENT – USFDAstraight and tapered stent options, Nitinol material
418CAROTID STENT – CE/DCGIClosed-cell design for crush resistance,Rotational deployment handle with Freestyle,U- and S-shaped connectors
419EMBOLIC PROTECTION SYSTEM – USFDACentered wire design, Circumferential nitinol frame, Platinum-tungsten frame coils, BareWir technology
420EMBOLIC PROTECTION SYSTEM – CE/DCGICentered wire design, Circumferential nitinol frame, Platinum-tungsten frame coils, BareWir technology
421Vascular Plug – Single Lobe
422Vascular Plug- Multi-layered mesh designed, Six planes of cross sectional coverage
423Suture-Mediated Closure and Repair System – USFDA APPROVED
424Suture-Mediated Closure (SMC) For Both Arterial And Venous Access – USFDA
425Suture-Mediated Closure (SMC) For Both Arterial And Venous Access – CE/DCGI
426Renal and Biliary Premounted Stent System – USFDA Macr Elements and additional proximal connectors
427Renal and Biliary Premounted Stent System – CE/DCGI Macr Elements and additional proximal connectors
428Drug Coated balloon for PTA – USFDATransPax Coating,Paclitaxel-Coated PTA Balloon Catheter
429Drug Coated balloon for PTA – USFDACE/DCGITransPax Coating,Paclitaxel-Coated PTA Balloon Catheter
430CAROTID STENT – USFDA APPROVEDClosed cell design,
431CAROTID STENT – CE/DCGI APPROVEDClosed cell design,
432Iliac and Biliary Premounted Stent System – USFDA Macro Elements engineered
433Iliac and Biliary Premounted Stent System – CE/DCGI Macro Elements engineered
434Renal and Biliary Premounted Stent System – USFDA Tandem Architectur Stent Design
435Renal and Biliary Premounted Stent System – CE/DCGI Tandem Architectur Stent Design
436SELF EXPANDING PERIPHERAL STENT – USFDA APPROVED
437PERIPHAREL Drug-Eluting Vascular Stent -USFDA
438PERIPHAREL Drug-Eluting Vascular Stent -CE/DCGI
439Self-Expanding Stent System for Iliac – USFDA
440Self-Expanding Stent System for Iliac – CE/DCGI
441DISTAL PROTECTION DEVICE 0.014 WIRE UMBRELLA TYPE CORONARY FILTER - US FDA/CE APPROVED
442DISTAL PROTECTION DEVICE 0.014 WIRE UMBRELLA TYPE CORONARY FILTER - DCGI APPROVED
443DISTAL PROTECTION DEVICE 0.014 WIRE UMBRELLA TYPE CAROTID ARTERY FILTER - US FDA/CE APPROVED
444DISTAL PROTECTION DEVICE 0.014 WIRE UMBRELLA TYPE CAROTID ARTERY FILTER - DCGI APPROVED
445EMBOLIC PROTECTION DEVICES BASED ON FILTER TECHNOLOGY/MECHANISM - US FDA APPROVED
446EMBOLIC PROTECTION DEVICES BASED ON FILTER TECHNOLOGY/MECHANISM - DCGI APPROVED
447EMBOLIC PROTECTION DEVICES WITH DISTAL BALLOON OCCLUSIVE TECHONOLOGY - US FDA APPROVED
448EMBOLIC PROTECTION DEVICES WITH DISTAL BALLOON OCCLUSIVE TECHONOLOGY-CE APPROVED
449EMBOLIC PROTECTION DEVICES WITH DISTAL BALLOON OCCLUSIVE TECHONOLOGY - DCGI APPROVED
450Distal embolic protection device - US FDA APPROVED Should be made of polyurethane with radio-opaque nitinol loopShould be suspended on the .014” wire with a suspension arm.Should not occlude flow while in placement, Should be rapid exchange type Should be compatible with a 6 F guiding catheter (0.066” ID) Should allow optimal filtration in vessels 3.5 - 5.5 mm size
451Distal embolic protection device – CE/DCGI APPROVED Should be made of polyurethane with radio-opaque nitinol loopShould be suspended on the .014” wire with a suspension arm.Should not occlude flow while in placement, Should be rapid exchange type Should be compatible with a 6 F guiding catheter (0.066” ID) Should allow optimal filtration in vessels 3.5 - 5.5 mm size
452Peripheral Cutting Balloon catheter - US FDA APPROVED Should be available in balloon OD of 3-6 mm Should have up to 15 mm or up to 20 mm working length
453Peripheral Cutting Balloon catheter – CE/DCGI APPROVED Should be available in balloon OD of 3-6 mm Should have up to 15 mm or up to 20 mm working length Catheter shaft length should be up to 140 cm
454Balloon in Balloon Catheter (BIB)- DCGI with US FDA /CE Approved
455Plaque Modification device for Highly calcified lesions - DCGI With US FDA / CE Approved Available in the sizes and length Should be along with support Accessories Super High pressure Balloon dialation catheter Non CompliantRBP -35 bar Must be twin layer in balloon with low lesion entry profile”0.16”
456IVC Filter – US FDA APPROVEDFor optimal filtration of IVC diameter of up to 40 mmMade of either nitinol or stainless steelCatheter carrier system inner diameter should be of maximum 12 FIt should be possible to insert from either jugular or femoral accessShould be for permanent use
457IVC Filter – CE APPROVEDFor optimal filtration of IVC diameter of up to 40 mmMade of either nitinol or stainless steelCatheter carrier system inner diameter should be of maximum 12 FIt should be possible to insert from either jugular or femoral accessShould be for permanent use
458IVC Filter – DCGIAPPROVEDFor optimal filtration of IVC diameter of up to 40 mmMade of either nitinol or stainless steelCatheter carrier system inner diameter should be of maximum 12 FIt should be possible to insert from either jugular or femoral accessShould be for permanent use
459Endovascular stent graft device for treatment of thoracic aortic aneurysms and dissections - US FDA APPROVEDDevice should be with proximal barbs, with or without distal bare spring configuration, and should be tapered or non – tapered.The aortic device should be available in any one or more of the following sizes: OD 26-44mm; Length 4-24 cm. The device should be able to be advanced on up to 24 Fr shaft size.The manufacturer should agree to supply the size customized to the patient’s anatomy based on CT angiography
460Endovascular stent graft device for treatment of thoracic aortic aneurysms and dissections – CE/DCGI APPROVEDDevice should be with proximal barbs, with or without distal bare spring configuration, and should be tapered or non – tapered.The aortic device should be available in any one or more of the following sizes: OD 26-44mm; Length 4-24 cm. The device should be able to be advanced on up to 24 Fr shaft size.The manufacturer should agree to supply the size customized to the patient’s anatomy based on CT angiography
461Endovascular stent graft device for treatment of abdominal aortic aneurysms – USFDA APPROVEDDevice should be with proximal barbs, with or without distal bare spring configuration, and should be either tapered or non – taperedDevices with trans-renal or suprarenal fixation should be quoted.The aortic device should be available in any 1 or more of the following sizes: OD 12-44mm; Length 4-24 cm. The device should be able to be advanced on up to 24 Fr shaft size.The limb extensions of the main device for abdominal aortic applications should be available in 12-22 mm diameter, with or without flared ends and up to 12 cm in lengthThe manufacturer should agree to supply the size customized to the patient’s anatomy based on CT angiography
462Endovascular stent graft device for treatment of abdominal aortic aneurysms – CE/DCGI APPROVEDDevice should be with proximal barbs, with or without distal bare spring configuration, and should be either tapered or non – taperedDevices with trans-renal or suprarenal fixation should be quoted.The aortic device should be available in any 1 or more of the following sizes: OD 12-44mm; Length 4-24 cm. The device should be able to be advanced on up to 24 Fr shaft size.The limb extensions of the main device for abdominal aortic applications should be available in 12-22 mm diameter, with or without flared ends and up to 12 cm in lengthThe manufacturer should agree to supply the size customized to the patient’s anatomy based on CT angiography
463RENAL DENERVATION DEVICE FOR RF ABLATION OF RENAL – CE / US FDA APPROVED
464RENAL DENERVATION DEVICE FOR RF ABLATION OF RENAL –DCGIAPPROVED
465C.P. STENT COVERED – CE APPROVEDShould be balloon Mounted.
466C.P. STENT COVERED – US FDA APPROVED
467C.P. STENT COVERED – DCGIAPPROVED
468AMPLATZER PLUG – CE APPROVED
469AMPLATZER PLUG – US FDA APPROVED
470AMPLATZER PLUG – DCGIAPPROVED
471SNARE FOR PERIFERAL USE – US FDA/CEAPPROVED
472SNARE FOR PERIFERAL USE – DCGIAPPROVED
473LONG ARTRIAL SHEETH 6F/7F/8F LENGTH >=90 CM – BRAIDED –US FDA/ CE APPROVED
474LONG ARTRIAL SHEETH 6F/7F/8F LENGTH >=90 CM – BRAIDED – DCGIAPPROVED
475LONG ARTRIAL SHEETH 6F/7F/8F LENGTH >=90 CM – UN BRAIDED– US FDA/ CE APPROVED
476LONG ARTRIAL SHEETH 6F/7F/8F LENGTH >=90 CM – UN BRAIDED– DCGIAPPROVED
477LONG ARTRIAL SHEETH UPTO 90 CM - BRAIDED – US FDA/ CE APPROVED
478LONG ARTRIAL SHEETH UPTO 90 CM - BRAIDED – DCGIAPPROVED
479LONG ARTRIAL SHEETH UPTO 90 CM - UNBRAIDED – US FDA/ CE APPROVED
480LONG ARTRIAL SHEETH UPTO 90 CM - UNBRAIDED – DCGIAPPROVED
481CROSS – OVER SHEETH - BRAIDED – US FDA/ CE APPROVED
482CROSS – OVER SHEETH - BRAIDED – DCGIAPPROVED
483CROSS – OVER SHEETH - UNBRAIDED – US FDA/ CE APPROVED
484CROSS – OVER SHEETH - UNBRAIDED – DCGIAPPROVED
485VISCERAL TYPE CATHETER – US FDA/ CE APPROVED
486VISCERAL TYPE CATHETER – DCGIAPPROVED
487HEAD HUNTER TYPE CATHETER – US FDA/ CE APPROVED
488HEAD HUNTER TYPE CATHETER – DCGIAPPROVED
489VTK TYPE CATHETER – US FDA/ CE APPROVED
490VTK TYPE CATHETER – DCGI APPROVED
491SIMMONS TYPE CATHETER – US FDA/ CE APPROVED
492SIMMONS TYPE CATHETER – DCGIAPPROVED
493COBRA TYPE CATHETER – US FDA/ CE APPROVED
494Abdominal stent graft for treating Aortic Aneurysm– US FDA APPROVED
495Abdominal stent graft for treating Aortic Aneurysm– CE APPROVED
496Abdominal stent graft for treating Aortic Aneurysm– DCGI APPROVED
497Thorosic stent graft for treating Thorasic Aneurysm and Thorosic dissection – US FDA APPROVED
498Thorosic stent graft for treating Thorosic Aneurysm and Thorosic dissection– CE APPROVED
499Thorosic stent graft for treating Thorosic Aneurysm and Thorosic dissection– DCGI APPROVED
500Covered Aortic stent balloon mounted - US FDA APPROVED
501Covered Aortic stent balloon mounted – CE Approved
502Covered Aortic stent balloon mounted (Andra Stent Type) – DCGI Approved
503Non-Covered Aortic stent balloon mounted - US FDA APPROVED
504Non-Covered Aortic stent balloon mounted – CE Approved
505Non-Covered Aortic stent balloon mounted(Endra Stent Type)– DCGI Approved
506ASD Occluders, -percutaneous transcatheter closure for non-surgical closure of atrial septal defect. Device should be self-expandable double disc made up of soft nitinol wire mesh that is shaped into two flat discs and a waist between. Polyester fabric sewn into each disc and the waist to promote occlusion and tissue in growth. The matellic material should be Intaglio treated to improve biocompatibilty and reduce nickel (Ni) leaching. Device should be MR Conditional upto 3Tesla or less. Device should be backed by strong clinical study with proven success rate for pediatrics and adults. – USFDA ApprovedSizes - 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm, 19mm, 20mm, 22mm, 24mm, 26mm, 28mm, 30mm, 32mm, 34mm, 36mm, 38mm, and,40mm
507ASD - Multi Fenestrated (Cribriform) Occluders, percutaneous transcatheter closure for non-surgical closure of atrial septal defect. Device should be self-expandable double disc made up of soft nitinol wire mesh that is shaped into two flat discs and a very thin waist of 3mm. Device should have matched disc diameters to maximise the coverage of multiple fenestrations. Polyester fabric sewn into each disc promote occlusion and tissue in growth. The matellic material should be Intaglio treated to improve biocompatibilty and reduce nickel (Ni) leaching. Device should be MR Conditional upto 3Tesla or less. Device should be backed by strong clinical study with proven success rate for pediatrics and adults. USFDA ApprovedSizes - 18mm, 25mm, 30mm, 35mm, and 40mm
508PDA Occluders, percutaneous transcatheter closure for non-surgical closure of patent ductus arteriosus. Device should be self- expandable made up of soft nitinol wire mesh, which has been heated and set to expand into T-Shape. Retention Skirt design should provide secure positioning with the ductus and reduce embolization. Polyester fabric sewn into the device to promote occlusion and tissue in growth. The matellic material should be Intaglio treated to improve biocompatibilty and reduce nickel (Ni) leaching. Device should be MR Conditional upto 3Tesla or less. Device should be backed by strong clinical study with proven success rate for pediatrics and adults.USFDA ApprovedSizes - 0405mm, 0406mm, 0608mm, 0810mm, 1012mm, 1214mm, and 1416mm
509PDA Occluder with Double Disc, percutaneous transcatheter closure for non-surgical closure of moderate patent ductus arteriosus. Device should be self-expandable made up of soft nitinol compliant-multilayered mesh and dual articulating discs that provide high conformability to treat maximum types of PDA. Device should have symmetric design that offers procedural flexibility to choose Antegrade or Retrograde approach. Device should have fabric-free technology that allows for delivery through low-profile catheterwhile maintaining high rate of occlusion. The matellic material should be Intaglio treated to improve biocompatibilty and reduce nickel (Ni) leaching. Device should be MR Conditional upto 3Tesla or less. Device should be backed by strong clinical study with proven success rate for pediatrics and adults. USFDA ApprovedSizes - 0304mm, 0306mm, 0404mm, 0406mm, 0504mm, 0506mm, 0604mm, and 0606mm
510PDA Occluder with Double Disc (for Neonates), percutaneous transcatheter closure for non-surgical closure of small patent ductus arteriosus in neonates while minimizing protrusion. Device should be self-expandable made up of soft nitinol compliant-multilayered mesh. Device should have low-profile dual articulating discs that provide high conformability to treat maximum types of small PDAs. Device should have symmetric design that offers procedural flexibility to choose Antegrade or Retrograde approach. Device must containt tightly woven, single layer mesh development to minimize residual shunt after placement. Device should be preloaded on delivery cable and comes with a special Low-Profile delivery catheter of 4Fr. The matellic material should be Intaglio treated to improve biocompatibilty and reduce nickel (Ni) leaching. Device should be MR Conditional upto 3Tesla or less. Device should be backed by strong clinical study with proven success rate for pediatrics and adults.USFDA ApprovedSizes - 0302mm, 0304mm, 0306mm, 0402mm, 0404mm, 0406mm, 0502mm, 0504mm, and, 0506mm
511Muscular VSD Occluder, is a percutaenous transcatheter closure for non-surgical closure of a ventricular septal defect. The occluder is designed to close complex muscular VSDs in patients to be at high risk of surgical repair. The device should be self-expandable symmetric double disc made from a soft nitinol mesh. the device waist should be self-centered and fill the defect. The device should be filled with polyester material that promotes occlusion and tissue in growth. The waist length should be 7mm to accomodate the thickness of muscular ventricular septal wall. Symmetric design should allow both Antegrade and Retrograde Approach. The matellic material should be Intaglio treated to improve biocompatibilty and reduce nickel (Ni) leaching. Device should be MR Conditional upto 3Tesla or less. Device should be backed by strong clinical study with proven success rate for pediatrics and adults.USFDA ApprovedSizes - 4mm, 6mm, 8mm, 10mm, 12mm, 14mm, 16mm, and 18mm
512P.I. Muscular VSD Occluder, is a percutaenous transcatheter closure for non-surgical closure of a ventricular septal defect. The occluder is designed to close complex muscular VSDs in patients to be at high risk post infarction caused due to MI. The device should be self-expandable symmetric double disc made from a soft nitinol mesh. the device waist should be self-centered and fill the defect. The device should be filled with polyester material that promotes occlusion and tissue in growth. The waist length should be 10mm to accomodate the thickness of apical ventricular septal wall. Symmetric design should allow both Antegrade and Retrograde Approach. The matellic material should be Intaglio treated to improve biocompatibilty and reduce nickel (Ni) leaching. Device should be MR Conditional upto 3Tesla or less. Device should be backed by strong clinical study with proven success rate for pediatrics and adults. USFDA ApprovedSizes - 16mm, 18mm, 20mm, 22mm, and 24mm
513Membranous VSD Occluder, is a percutaneous transcatheter closure for non-surgical closure of peri-membranous ventricular septal defect. It should be non-concentric design allows for placement that avoida interference with aortic or AV valves. The device should be made up of soft nitinol meshwith interwoven polyester to promote occlusion and tissue in-growth. The device should be delievered using a Pusher Catheter from Venous Approach. The matellic material should be Intaglio treated to improve biocompatibilty and reduce nickel (Ni) leaching. Device should be MR Conditional upto 3Tesla or less. Device should be backed by strong clinical study with proven success rate for pediatrics and adults.USFDA ApprovedSizes - 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, and 18mm
514PFO Occluder, is a percutaneous transcatheter closure for non-surgical closure of patent foramen ovale. Device should be self- expandable double disc made up of soft nitinol wire mesh that is shaped into two flat discs and a very thin waist of 3mm. Device should have matched disc diameters to maximise the coverage of Foramen Ovale. Polyester fabric sewn into each disc promote occlusion and tissue in growth. The matellic material should be Intaglio treated to improve biocompatibilty and reduce nickel (Ni) leaching. Device should be MR Conditional upto 3Tesla or less. Device should be backed by strong clinical study with proven success rate for pediatrics and adults. USFDA ApprovedSizes - 18mm, 25mm, 30mm, and 35mm
515ATV, Special Delivery System designed for ASD and PFO Cases. This delivery system comes with an ultra-flexible tip for better positioning of the device. Enhanced delivery cable improves the assessment of device final position prior to cable release. It is designed for no compromise on torque strength, sheath diameter and pushability.USFDA ApprovedSizes - 6fr, 7fr, 8fr, 9fr, 10fr, 12fr, and 13fr
516ITV, Special Delivery System with Delivery Cable angeled at 45°. Used for ASD and PFO cases USFDA Approved Sizes - 6fr, 7fr, 8fr, 9fr, 10fr, 12fr, and 13fr
517ITV, Special Delivery System with Delivery Cable angeled at 180°. Used for VSD and PDA cases USFDA Approved Sizes - 5fr, 6fr, 7fr, 8fr, and 9fr
518TVLP, Special Delivery System for PDA Occluder with Double Disc angeled at 90° (ADO II) USFDA Approved Sizes - 4fr and 5fr
519TVLPC, Special Delivery Catheter for speical sizes of PDA Occluder with Double Disc angeled at 90° (Piccolo Device) USFDA Approved Sizes - 4fr
520ITVP, Special Delivery System with Pusher Catheter angeled at 180°USFDAApproved Sizes - 7fr, 8fr and 9fr
521LAA Closure, is a percutaneous transcatheter closure for non-surgical closure of Left Atrial Appendage. Having an innovative design of Cylindrical Plug attached with the retention skirt. Cylindrical Plug shaped head is designed to trap trabeculations. Device should be preloaded on the delivery cable with delivery profile of 12fr to 14fr. Devide should be made up of soft woven Nitinol mesh. The matellic material should be Intaglio treated to improve biocompatibilty and reduce nickel (Ni) leaching. Device should be MRConditional upto 3Tesla or less. Device should be backed by strong clinical study with proven success rate for pediatrics and adults. USFDA ApprovedSizes - 16mm, 18mm, 20mm, 22mm, 25mm, 28mm, 31mm, and, 34mm
522TV, Special Delivery System with dual angeled sheath at 45° x 45° with the usable length of 80cm specially designed for LAA OccludersUSFDA ApprovedSize - 12fr. And 14fr.
523Sizing Balloon with a triple lumen balloon catheter with three radiopaque marker bands located inside the balloon to allow for radiographic measurement. The centre of the balloon should contains a pair of marker bands 0.4mm apart for corrent balloonalignment while measuing the defect and one marker band 15mm proximal of the pair.USFDA ApprovedSize - 18mm, 24mm. And 34mm
524PVL Occluder is a percutaneour transcatheter closure of Para Valvular Leak which is a serious complication of valve replacement surgery. Devide should be made up of soft woven muti-layered Nitinol mesh designed to increase density and provide rapid occlusion. Low profile 4fr to 7fr sheath to facilitate defect crossing. Oblonged shape to improve wall apposition and enhance stability in PVL. Device orientation should be defined through a small platinum marker on the distal rim. The matellic material should be Intaglio treated to improve biocompatibilty and reduce nickel (Ni) leaching. Device should be MR Conditional upto 3Tesla or less. Device should be backed by strong clinical study with proven success rate for pediatrics and adults.USFDA ApprovedSize - 0204mm, 0306mm, 0408mm, 0310mm, 0510mm, 0312mm, 0512mm, 0314mm, and 0514mm.
525PDA CLOSURE DEVICES WITHOUT DELIVERY SYSTEM — CE/DCGI APPROVED Available in all the sizes• Hat-shaped designed PDA occluder device• Platinum coating of ≤25 µ using nano fusion technology• Polypropylene fabric sewn inside the occluder device• Extended retention portion provides proper positioning of the device in the ductus arteriosus• Available Sizes- 4/6, 6/8, 8/10, 10/12, 12/14, 14/16, 16/18, 18/20mm
526DELIVERY SHEATH FOR PDA CLOSURE DEVICE — CE /DCGI APPROVED
527PDA CLOSURE DEVICES WITH DELIVERY SYSTEM – CE APPROVED/ DGCI APPROVED·Available in all the sizes•Hat-shaped designed PDA occluder device• Platinum coating of ≤25 µ using nano fusion technology • Polypropylene fabric sewn inside the occluder device• Extended retention portion provides proper positioning of the device in the ductus arteriosus• Available Sizes- 4/6, 6/8, 8/10, 10/12, 12/14, 14/16, 16/18, 18/20mm
528VSD CLOSURE DEVICES WITHOUT DELIVERY SYSTEM — CE/DCGI APPROVED• Self-expanding, self-centering double-disc device• Platinum coating of ≤25 µ using nano fusion technology• Polypropylene fabric sewn inside the occluder device• Available Sizes- 4-4, 4-10, 6-4, 6-10, 8-4, 8-10, 10-4, 10-10, 12-4, 12-10mm• Certificates- CE & DCGI Approved• Shelf Life- 3 years
529DELIVERY SHEATH FOR VSD CLOSURE DEVICE — CE APPROVED
530VSD CLOSURE DEVICES WITH DELIVERY SYSTEM — CE/DCGI APPROVED• Self-expanding, self-centering double-disc device• Platinum coating of ≤25 µ using nano fusion technology• Polypropylene fabric sewn inside the occluder device• Available Sizes- 4-4, 4-10, 6-4, 6-10, 8-4, 8-10, 10-4, 10-10, 12-4, 12-10mm• Delivery cable available along with cable sheath in individual packaging• Soft and flexible distal end of delivery cable to navigate in various anatomies• Availability of ‘S-shaped’ sheath• Certificates- CE & DCGI Approved• Shelf Life- 3 years
531Valve• Self-expanding frame, Supra-annular valve design, Bovine Pericardial Valve• Proprietary Anti-calcification tissue treatment• Extended internal sealing skirt• Two rows of Radio-opaque markers on the frame• Varying radial force frame – optimal forces at all 3 parts of the frame• Available in three sizes of 22, 26, and 30 mm, which cover the treatable annular diameter range from 17 to 27 mm• Post dilatation limits of valve frame equal to approved annulus diameter limit• Cell size of ≥ 15 French• Less metal at the inflow section• Certificates- CE & DCGI Approved
532PFO CLOSURE DEVICES WITH DELIVERY SYSTEM — CE/DCGI APPROVED• Self-expanding, self-centering double-disc occluder• Platinum coating of ≤25 µ using nano fusion technology• Polypropylene fabric sewn inside the occluder device• Available in 6 sizes, 5 sizes (18/18, 25/18, 25/25, 30/25, 30/30 mm) which are 8F compatible and 1 size (35/25 mm) which is 9F compatible• 6F delivery cable available in individual packaging• Certificates- CE & DCGI Approved• Shelf Life- 3 years
533PFO CLOSURE DEVICES WITHOUT DELIVERY SYSTEM — CE/DCGI APPROVED• Self-expanding, self-centering double-disc occluder• Platinum coating of ≤25 µ using nano fusion technology• Polypropylene fabric sewn inside the occluder device• Available in 6 sizes, 5 sizes (18/18, 25/18, 25/25, 30/25, 30/30 mm) which are 8F compatible and 1 size (35/25 mm) which is 9F compatible• Certificates- CE & DCGI Approved• Shelf Life- 3 years
534DELIVERY SHEATH FOR PFO CLOSURE DEVICE — CE/DCGI APPROVED•Compatible with the device approved
535ASD CLOSURE DEVICES WITHOUT DELIVERY SYSTEM– CE APPROVED/DCGI APPROVED·Approved for pediatric/adult use• Self-expanding, self-centering double-disc device• Platinum coating of ≤25 µ using nano fusion technology• Polypropylene fabric sewn inside the occluder device• Available in sizes- 8, 10, 12, 14, 16, 18, 20, 22, 24, 26, 28, 30, 32, 34, 36, 38 & 40mm
536ASD CLOSURE DEVICES WITH DELIVERY SYSTEM – CE APPROVED/DCGI APPROVED·Approved for pediatric/adult use·Self-centering, detachable device with delivery cable• Self-expanding, self-centering double-disc device• Platinum coating of ≤25 µ using nano fusion technology• Polypropylene fabric sewn inside the occluder device• Available in sizes- 8, 10, 12, 14, 16, 18, 20, 22, 24, 26, 28, 30, 32, 34, 36, 38 & 40mm and Delivery Sheath
537DELIVERY SHEATH FOR ASD CLOSURE DEVICE - CE/DCGI APPROVED
538DELIVERY CABLE FOR ASD/VSD/PDA/PFO DEVICES - CE/DCGI APPROVED
539LEFT ATRIAL APPENDAGE CLOSURE DEVICE US FDA APPROVED
540Occlusion balloon-DCGI with US FDA / CE ApprovedShouldbe soft compliant balloon material with Radio-opaque markers at both distal and proximal end of balloonShould be 14fr / 16fr Sheath and 0.035”/0.038” wire compatible.Should be available in diameter 20 mm/ 27 mm / 33 mm and 40 mm.
541PDA COILS MADE OF STEEL/ NITINOL/PLATINUM - US FDA APPROVED 0.035, 0.038 InchesSizes ranging from 2 x 2 to 15 x 15
542PDA COILS MADE OF STEEL/ NITINOL/PLATINUM - CE APPROVED 0.035, 0.038 InchesSizes ranging from 2 x 2 to 15 x 15
543PDA COILS MADE OF STEEL/ NITINOL/PLATINUM – DCGI APPROVED 0.035, 0.038 InchesSizes ranging from 2 x 2 to 15 x 15
5440.052 INCH PDA COILS MADE OF STEEL/ NITINOL/PLATINUM - US FDA APPROVEDSizes ranging from 2 x 2 to 15 x 15
5450.052 INCH PDA COILS MADE OF STEEL/ NITINOL/PLATINUM - CE APPROVEDSizes ranging from 2 x 2 to 15 x 15
5460.052 INCH PDA COILS MADE OF STEEL/ NITINOL/PLATINUM – DCGI APPROVEDSizes ranging from 2 x 2 to 15 x 15
547EMBOLISATION COILS (0.018 INCH) - US FDA APPROVEDSizes ranging from 2 x 2 to 15 x 15
548EMBOLISATION COILS (0.018 INCH) - CE APPROVEDSizes ranging from 2 x 2 to 15 x 15
549EMBOLISATION COILS (0.018 INCH) – DCGI APPROVEDSizes ranging from 2 x 2 to 15 x 15
550EMBOLISATION COILS (0.035 INCH) - US FDA APPROVEDSizes ranging from 2 x 2 to 15 x 15
551EMBOLISATION COILS (0.035 INCH) - CE APPROVEDSizes ranging from 2 x 2 to 15 x 15
552EMBOLISATION COILS (0.035 INCH) – DCGI APPROVEDSizes ranging from 2 x 2 to 15 x 15
553EMBOLISATION COILS (0.052 INCH) - US FDA APPROVEDSizes ranging from 2 x 2 to 15 x 15
554EMBOLISATION COILS (0.052 INCH) - CE APPROVEDSizes ranging from 2 x 2 to 15 x 15
555EMBOLISATION COILS (0.052 INCH) –DCGI APPROVEDSizes ranging from 2 x 2 to 15 x 15
556PARK BLADE SEPTECTOMY CATHETER - US FDA APPROVED
557PARK BLADE SEPTECTOMY CATHETER - CE APPROVED
558PARK BLADE SEPTECTOMY CATHETER – DCGI APPROVED
559Embolisation Coils - US FDA APPROVEDShould be 0.014/0.018” compatibleShould be made of platinum with synthetic fibresShould be non tapering/straightShould be MR compatibleShould be available in any or the following diameters: 2-10 mmShould be of various lengths; the length of the coil at each diameter should be stated
560Embolisation Coils - CE APPROVEDShould be 0.014/0.018” compatibleShould be made of platinum with synthetic fibresShould be non tapering/straightShould be MR compatibleShould be available in any or the following diameters: 2-10 mmShould be of various lengths; the length of the coil at each diameter should be stated
561Embolisation Coils – DCGI APPROVEDShould be 0.014/0.018” compatibleShould be made of platinum with synthetic fibresShould be non tapering/straightShould be MR compatibleShould be available in any or the following diameters: 2-10 mmShould be of various lengths; the length of the coil at each diameter should be stated
562Embolisation Coils - USFDA APPROVEDShould be 0.035/0.038” compatibleShould be made of platinum with synthetic fibresShould be MR compatibleShould be tapering from a larger to a smaller endShould be available in following sizes: diameters: 5-10 mm and length 2-15 cmThe diameter to tapered end for tapering type coil should be mentioned
563Embolisation Coils - CE APPROVEDShould be 0.035/0.038” compatibleShould be made of platinum with synthetic fibresShould be MR compatibleShould be tapering from a larger to a smaller endShould be available in following sizes: diameters: 5-10 mm and length 2-15 cmThe diameter to tapered end for tapering type coil should be mentioned
564Embolisation Coils – DCGI APPROVEDShould be 0.035/0.038” compatibleShould be made of platinum with synthetic fibresShould be MR compatibleShould be tapering from a larger to a smaller endShould be available in following sizes: diameters: 5-10 mm and length 2-15 cmThe diameter to tapered end for tapering type coil should be mentioned
565Embolisation Coils - US FDA APPROVED Should be 0.035/0.038/0.052” compatible Should be non tapering/straight Should be made of stainless steel with synthetic fibresShould be available in the following sizes: diameters: 3-15 mm and length 2-15 cm
566Embolisation Coils - CE APPROVED Should be 0.035/0.038/0.052” compatible Should be non tapering/straight Should be made of stainless steel with synthetic fibresShould be available in the following sizes: diameters: 3-15 mm and length 2-15 cm
567Embolisation Coils – DCGI APPROVED Should be 0.035/0.038/0.052” compatible Should be non tapering/straight Should be made of stainless steel with synthetic fibresShould be available in the following sizes: diameters: 3-15 mm and length 2-15 cm
568Coil pusher wire for 0.014/0.018” coils, compatible with the quoted micro catheters - US FDA APPROVED
569Coil pusher wire for 0.014/0.018” coils, compatible with the quoted micro catheters - CE APPROVED
570Coil pusher wire for 0.014/0.018” coils, compatible with the quoted microcatheters – DCGI APPROVED
571Gelfoam sheet for vascular embollization - US FDA APPROVED
572Gelfoam sheet for vascular embollization - CE APPROVED
573Gelfoam sheet for vascular embollization – DCGI APPROVED
574Liquid Embolization system available in Various sizes (2ml, 3ml & 6ml)– US FDA/ CE / DCGI APPROVED
575PBMV BALLOON (ALL TYPES AND SIZES) WITH ACCESSORIES – US FDA APPROVED
576PBMV BALLOON (ALL TYPES AND SIZES) WITH ACCESSORIES – CE APPROVED
577PBMV BALLOON (ALL TYPES AND SIZES) WITH ACCESSORIES – DCGI APPROVED
578PBMV BALLOON (ALL TYPES AND SIZES) WITHOUT ACCESSORIES – US FDA APPROVED
579PBMV BALLOON (ALL TYPES AND SIZES) WITHOUT ACCESSORIES –CE APPROVED
580PBMV BALLOON (ALL TYPES AND SIZES) WITHOUT ACCESSORIES –DCGI APPROVED
581ACCESSORIES ONLY FOR THE ABOVE PBMV BALLOONS – US FDA APPROVED
582ACCESSORIES ONLY FOR THE ABOVE PBMV BALLOONS – CE APPROVED
583ACCESSORIES ONLY FOR THE ABOVE PBMV BALLOONS – DCGI APPROVED
584PBMV BALLOON WITH SIDE SAFETY / MICROHOLES WITH ACCESSORIES– US FDA APPROVED
585PBMV BALLOON WITH SIDE SAFETY / MICROHOLES WITH ACCESSORIES– CE APPROVED
586PBMV BALLOON WITH SIDE SAFETY / MICROHOLES WITH ACCESSORIES– DCGIAPPROVED
587PBMV BALLOON WITH SIDE SAFETY / MICROHOLES WITHOUT ACCESSORIES – US FDA APPROVED
588PBMV BALLOON WITH SIDE SAFETY/ MICROHOLES WITHOUT ACCESSORIES– CE APPROVED
589PBMV BALLOON WITH SIDE SAFETY/ MICROHOLES WITHOUT ACCESSORIES– DCGIAPPROVED
590PTMC BALLOON WITH HOLE IN BALLOON – US FDA APPROVED
591PTMC BALLOON WITH HOLE IN BALLOON – CE APPROVED
592PTMC BALLOON WITH HOLE IN BALLOON – DCGI APPROVED
593PTMC BALLOON (WITH HOLE IN BALLOON) WITH ALL ACESSORIES- US FDA APPROVED
594PTMC BALLOON (WITH HOLE IN BALLOON) WITH ALL ACESSORIES- CE APPROVED
595PTMC BALLOON (WITH HOLE IN BALLOON) WITH ALL ACESSORIES- DCGI APPROVED
596TAVI (|TRANS CATHETER AORTIC VALVE REPLACEMENT SYSTEM WITH ALL REQUIRED ACCESSORIES) - – DCGI With US FDA /CE APPROVED
597TAVI (|TRANS CATHETER AORTIC VALVE REPLACEMENT SYSTEM WITH ALL REQUIRED ACCESSORIES)- CE APPROVED
598TAVI (|TRANS CATHETER AORTIC VALVE REPLACEMENT SYSTEM WITH ALL REQUIRED ACCESSORIES) – DCGI APPROVED
599Self Expandable Trans Catheter Aortic Valve Replacement System With All Required Accessories –US FDA /CE APPROVEDShould be inAll Sizes DiameterAnti – Calcification and Chemical Dehydration Thin & Strong Low Profile With Delivery System.
600Self Expandable Trans Catheter Aortic Valve Replacement System With All Required Accessories – DCGI APPROVEDShould be inAll Sizes DiameterAnti – Calcification and Chemical Dehydration Thin & Strong Low Profile With Delivery System.
601Self Expandable Trans Catheter TricuspidValve Replacement System With All Required Accessories – DCGI With US FDA /CE APPROVEDShould be inAll Sizes DiameterAnti – Calcification and Chemical Dehydration Thin & Strong Low Profile With Delivery System.
602Trans Catheter Tricuspid Valve Replacement System With All Required Accessories – DCGI With US FDA /CE APPROVEDShould be inAll Sizes DiameterAnti – Calcification and Chemical Dehydration Thin & Strong Low Profile With Delivery System.
603Mitra-Clip (TRANS CATHETER Mitral VALVE Clip System) - DCGI with US FDA / CE Approved
604Mitra-Valve (TRANS CATHETER Mitral VALVE) - DCGI
605TAVI (|TRANS CATHETER AORTIC VALVE REPLACEMENT SYSTEM WITH ALL REQUIRED ACCESSORIES)- usfda APPROVED
606TAVI (|TRANS CATHETER AORTIC VALVE REPLACEMENT SYSTEM WITH ALL REQUIRED ACCESSORIES)- CE APPROVED
607TAVI (|TRANS CATHETER AORTIC VALVE REPLACEMENT SYSTEM WITH ALL REQUIRED ACCESSORIES)- DCGIAPPROVED
608TAVI Guide-wire -DCGI with US FDA / CE ApprovedShould be available in diameter 0.035, length 250-275 cm,Should have spring coil PTFE coating and Extra Small, small & large curves.
609WIRE 0.018” REGULAR LENGTH, REGULAR SHAFT STIFFNESS - US FDA APPROVEDFloppy Tip, Straight / J Shaped tip, 140-300cm long
610WIRE 0.018” REGULAR LENGTH, REGULAR SHAFT STIFFNESS - CE APPROVEDFloppy Tip, Straight / J Shaped tip, 140-300cm long
611WIRE 0.018” REGULAR LENGTH, REGULAR SHAFT STIFFNESS – DCGI APPROVEDFloppy Tip, Straight / J Shaped tip, 140-300cm long
612WIRE 0.018” REGULAR LENGTH, EXTRA – STIFF SHAFT - US FDA APPROVEDFloppy Tip, Straight / J Shaped tip, 140-300cm long
613WIRE 0.018” REGULAR LENGTH, EXTRA – STIFF SHAFT- CE APPROVEDFloppy Tip, Straight / J Shaped tip, 140-300cm long
614WIRE 0.018” REGULAR LENGTH, EXTRA – STIFF SHAFT- DCGI APPROVEDFloppy Tip, Straight / J Shaped tip, 140-300cm long
615VALVOPLASTY BALLOON CATHETERS - US FDA APPROVEDVarying sizes and diametersApproved for pediatric/adults use
616VALVOPLASTY BALLOON CATHETERS - CE APPROVEDVarying sizes and diametersApproved for pediatric/adults use
617VALVOPLASTY BALLOON CATHETERS – DCGI APPROVEDVarying sizes and diametersApproved for pediatric/adults use
618SPECIAL BALLOON CATHETER COMPATIBLE WITH 4 FRENCH SHEATH - US FDA APPROVEDCompatible with 0.018 inch guide wireVarying length and diamete
619SPECIAL BALLOON CATHETER COMPATIBLE WITH 4 FRENCH SHEATH - CE APPROVEDCompatible with 0.018 inch guide wireVarying length and diameter
620SPECIAL BALLOON CATHETER COMPATIBLE WITH 4 FRENCH SHEATH – DCGI APPROVEDCompatible with 0.018 inch guide wireVarying length and diameter
621SPECIAL PEDIATRIC VALVOPLASTY BALLOON CATHETERS COMPATIBLE WITH 4 FRENCH SHEATH - US FDA APPROVEDCompatible with 0.025 inch guide wireVarying length and diameter
622SPECIAL PEDIATRIC VALVOPLASTY BALLOON CATHETERS COMPATIBLE WITH 4 FRENCH SHEATH - CE APPROVEDCompatible with 0.025 inch guide wireVarying length and diameter
623SPECIAL PEDIATRIC VALVOPLASTY BALLOON CATHETERS COMPATIBLE WITH 4 FRENCH SHEATH – DCGI APPROVEDCompatible with 0.025 inch guide wireVarying length and diameter
624VALVOPLASTY BALLOON CATHETERS (sizes 10 – 22 mm)- US FDA APPROVEDApproved for pediatric/adults useVarying length and diameterNominal pressure < 4 ATM
625VALVOPLASTY BALLOON CATHETERS (sizes 10 – 22 mm)- CE APPROVEDApproved for pediatric/adults useVarying length and diameterNominal pressure < 4 ATM
626VALVOPLASTY BALLOON CATHETERS (sizes 10 – 22 mm)- DCGI APPROVEDApproved for pediatric/adults useVarying length and diameterNominal pressure < 4 ATM
627BALLOON CATHETERS (sizes 10 – 22 mm)- US FDA APPROVEDApproved for pediatric/adults useVarying length and diameterNominal pressure < 8 ATM
628BALLOON CATHETERS (sizes 10 – 22 mm)- CE APPROVEDApproved for pediatric/adults useVarying length and diameterNominal pressure < 8 ATM
629BALLOON CATHETERS (sizes 10 – 22 mm)- DCGIAPPROVEDApproved for pediatric/adults useVarying length and diameterNominal pressure < 8 ATM
630BALLOON IN BALLOON CATHETERS- US FDA APPROVEDQuote in all sizes
631BALLOON IN BALLOON CATHETERS- CE APPROVEDQuote in all sizes
632BALLOON IN BALLOON CATHETERS- DCGIAPPROVEDQuote in all sizes
633FOGARTY EMBOLECTOMY CATHETER - US FDA APPROVED4Fr./5Fr./6 Fr. sizesMetal rod at tip of the catheter to enable angulations up to 60 degrees
634FOGARTY EMBOLECTOMY CATHETER - CE APPROVED4Fr./5Fr./6 Fr. sizesMetal rod at tip of the catheter to enable angulations up to 60 degrees
635FOGARTY EMBOLECTOMY CATHETER - DCGI APPROVED4Fr./5Fr./6 Fr. sizesMetal rod at tip of the catheter to enable angulations up to 60 degrees
636ATRIAL SEPTOSTOMY CATHETER - US FDA APPROVED4Fr./5Fr./6 Fr. sizes
637ATRIAL SEPTOSTOMY CATHETER - CE APPROVED4Fr./5Fr./6 Fr. sizes
638ATRIAL SEPTOSTOMY CATHETER – DCGI APPROVED4Fr./5Fr./6 Fr. sizes
639DETACHABLE BALLOON - US FDA APPROVED
640DETACHABLE BALLOON - CE APPROVED
641DETACHABLE BALLOON – DCGI APPROVED
642VASCULAR PLUGS – US FDA APPROVED
643VASCULAR PLUGS – CE APPROVED
644VASCULAR PLUGS IMPLANTATION– DCGI with US FDA / CE Approvedshould be Titanium Nitride Coated.Should have PTFE layers for enhanced occlusion.Should be Available in various sizes (4.0- 24.0 MM.
645VALVOPLASTY BALLOON CATHETERS TYSHEK TYPE (all sizes) - US FDA APPROVEDApproved for pediatric/adults useVarying length and diameterNominal pressure < 4 ATM
646VALVOPLASTY BALLOON CATHETERS TYSHEK TYPE (all sizes)- CE APPROVEDApproved for pediatric/adults useVarying length and diameterNominal pressure < 4 ATM
647Aortic Stent graft Abdominal -DCGI with US FDA / CE ApprovedEndovascular stent graft device for the treatment of thoracic aortic aneurysm or dissection with PTFE dual Membrane coating.With metal spine on the greater curvature to avoid stent shortening and provide axial support.
648A U I Stent Graft SystemDCGI with US FDA / CE ApprovedSpecifically designed for treatment of endovascular Abdominal aortic AneurysmA self – expandable nitinol stent with PTFE dual Membrane coating & offers axial support preventing foreshortening of stent.
649iliac Stent Graft -DCGI with US FDA / CE ApprovedEndo-vascular stent graft device for the treatment iliac aneurysm or dissection.With proximal bare spring configuration. It should be an extension to AAA graft system
650Multifunctional Occluder-DCGI with US FDA / CE ApprovedFor Occlusion of muscular VSD peri-membranous VSD, RSOV, Apex window & AV FistulaShould be low profile (4F-6F) and Should come with a Elongatable waist.
651Peripheral Snare with Tungsten Loop coated with Titanium Nitride - DCGI with CE/ US FDA ApprovedLoop Size 5MM to 35MM. Shaft Size up to 6F
652Peripheral Snare with Tungsten loop Coated with Titanium Nitride (5mm to 35mm) -DCGI with US FDA / CE Approved
653IVC Filter For Optimal Filtration of IVC Up to 23mm -DCGI with US FDA / CE ApprovedMade of national and filter length up to 40For Temporary PlacementIt Should be administrable from Jugular/ femoral route
654Coronary Snare with tungsten loop coated with Titanium Nitride (4mm&7mm) -DCGI with US FDA / CE Approved
655Steerable Sheath with deflectable tip (190-160degree) -DCGI with US FDA / CE Approved
656PVA particles with consistent sized Particles - DCGI with US FDA/ CE APPROVED
657ENDOMYOCARDIAL BIOPSY (EMB) FORCEPS SET - US FDA APPROVEDSet should includeShould include an endomyo-cardial biopsy foreeps and compatible pre-shaped introducer sheath with side arm and its dilator
658ENDOMYOCARDIAL BIOPSY (EMB) FORCEPS SET – CE/DCGI APPROVEDSet should includeShould include an endomyo-cardial biopsy foreeps and compatible pre-shaped introducer sheath with side arm and its dilatorVariable lengths and sizesShould be available for both for jugular and femoral access
659INTRAVASCULAR RETRIEVER – SNARE (‘AMPLATZ GOOSENECK’ TYPE) - US FDA APPROVEDSnare kit should includeA snare and its compatible sheathShould have nitinol shaftShould have 90 degree preformed snare loopVariable sizes of loop (5-35 mm)
660INTRAVASCULAR RETRIEVER – SNARE (‘AMPLATZ GOOSENECK’ TYPE) - CE APPROVEDSnare kit should includeA snare and its compatible sheathShould have nitinol shaftShould have 90 degree preformed snare loopVariable sizes of loop (5-35 mm)
661INTRAVASCULAR RETRIEVER – SNARE (‘AMPLATZ GOOSENECK’ TYPE) –DCGIAPPROVEDSnare kit should includeA snare and its compatible sheathShould have nitinol shaftShould have 90 degree preformed snare loopVariable sizes of loop (5-35 mm)
662SHEATHS FOR INTRAVASCULAR SNARES - US FDA APPROVEDShould be compatible with item no. 3 &4
663SHEATHS FOR INTRAVASCULAR SNARES - CE APPROVEDShould be compatible with item no. 3 & 4
664SHEATHS FOR INTRAVASCULAR SNARES – DCGI APPROVEDShould be compatible with item no. 3 & 4
665INTRAVASCULAR RETRIEVER – MICROSNARE (‘ AMPLATZ GOOSENECK’ TYPE) - US FDA APPROVEDMicrosnare kit should includeA microsnare, compatible micro – catheter, micro – catheter introducer and a torque deviceShould have nitinol shaftShould have 90 degree preformed snare loopVariable sizes (2-7 mm)
666INTRAVASCULAR RETRIEVER – MICROSNARE (‘ AMPLATZ GOOSENECK’ TYPE) - CE APPROVEDMicrosnare kit should includeA microsnare, compatible micro – catheter, micro – catheter introducer and a torque deviceShould have nitinol shaftShould have 90 degree preformed snare loopVariable sizes (2-7 mm)
667INTRAVASCULAR RETRIEVER – MICROSNARE (‘ AMPLATZ GOOSENECK’ TYPE) – DCGIAPPROVEDMicrosnare kit should includeA microsnare, compatible micro – catheter, micro – catheter introducer and a torque deviceShould have nitinol shaftShould have 90 degree preformed snare loopVariable sizes (2-7 mm)
668ACCESSORIES FOR INTRAVASCULAR MICROSNARE - US FDA APPROVEDShould be compatible with item no. 7 & 8
669ACCESSORIES FOR INTRAVASCULAR MICROSNARE - CE APPROVEDShould be compatible with item no. 7 & 8
670ACCESSORIES FOR INTRAVASCULAR MICROSNARE – DCGIAPPROVEDShould be compatible with item no. 7 & 8
671INTRAVASCULAR RETRIEVER – BASKET - US FDA APPROVEDSet should includeBasket retriever and its catheterShould be available in all sizes
672INTRAVASCULAR RETRIEVER – BASKET - CE APPROVEDSet should includeBasket retriever and its catheterShould be available in all sizes
673INTRAVASCULAR RETRIEVER – BASKET – DCGI APPROVEDSet should includeBasket retriever and its catheterShould be available in all sizes
674INTRAVASCULAR RETRIEVER SNARE KIT Goose Neck Type – DCGI & US FDA / CE Approved
675SIZING BALLOON FOR DEVICE CLOSURE — CIRCULAR SHAPE - CE APPROVED
676Sizing balloon for device closure - Round Shape - DCGI /CE Approved
677COBALT ClIROMIUM RENAL STENTS, PREMOUNTED ON BALLOON DCGI APPROVED· Monorail (rapid exchange) and over-the-wire (OTW)· Available in the sizes and lengthsThreeMid-strut to mid-strut connectors between two rings.• Two different crown design for diameters between 5- 7 mm.• Crossing profile ≤ 1.50 mm• Zero foreshortening• Available in 5,6 and 7mm diameters with length of 12,15 and 18 mm.
678Permanent venacava filter– CE APPROVED
679Permanent venacava filter– US FDA APPROVED
680Permanent venacava filter– DCGI APPROVED
681Temporary venacava filter– CE APPROVED
682Temporary venacava filter– US FDA APPROVED
683Temporary venacava filter– DCGI APPROVED
6841 port Cath-Lock™ Introducer Sheath with Hemostasis Valve and Sideport, Dilator,and 50 cm Double Distal Guidewire with “J” and straight ends
6852 Port Hemostasis Adapter with Sideports and Cath-Lock™ sealing mechanism, Venous Sheath,Dilator and 50 cm Double Distal guidewire with “J” and straight ends
6863 Port Hemostasis Adapter with Sideports and Cath-Lock™ sealing mechanism, Venous Sheath,Dilator and 50 cm Double Distal Guidewire with “J” and straight ends
687Introducer Sheath with Hemostasis Valve and Sideport, and Dilator , Mullins style curve 6/7/8 F size, 61cm usable length , 67cm Dilator usable length
688Swartz lntroducer Braided sheath with hemostatic valve SL0/SL1/SL2/SL3 (8F, 63 cm usable length and 67cm Dilator usable length) accomodates maximum 0.32 Guidewire
689Swartz lntroducer Non Braided sheath with hemostatic valve SR0/SR1/SR2/SR3 (8F, 63 cm),(8F, 63 cm usable length) accomodates maximum 0.38 Guidewire
6908.5 F : 71 cm Bi-Directional (Assymetrical ) Deflectable sheath , CurlDimension 16.8mm and 22.4 mm with Integrated hemostasis valve and Radiopaque tip marker and various curve options , compatible with 98 cm Transseptal Needle along with 180 cm Super Stiff Guidewire
6918.5 F : 40 cm Bi-Directional (Assymetrical ) Deflectablesheath used for EPICARDIALwith Integrated hemostasis valve and Radiopaque tip marker and various curve options
692BRK/BRK-1Needle-Adult, 18 gauge, usable length 71 cm.
693BRK/BRK-1 Needle-Adult, 18 gauge, usable length 98 cm.
694Fixed Curve Quadripolar Electrophysiology catheter (6F/5F/4F, 1mm band electrode) CRD/JSN/DAO, 2-5-2 mm electrode spacing
695Fixed Curve Quadripolar Electrophysiology catheter (6F) CRD-2, 5mmelectrode spacing
696Fixed Cuve (CSL) Decapolar Catheter (6F) -65 cm usable length with 5-5-5 Spacing with Tip Electrode 2mm
697Fixed Cuve (CSL) Decapolar Catheter (6F) -120 cm usable length with 5-5-5 Spacing with Tip Electrode 2mm
698Deflectable Decapolar Electrophysiology Catheter with connector (6F)-110cm usable length with 2-5-2 Spacing
699Deflectable Decapolar Electrophysiology Catheter with connector (5F)-110cm usable length with 2-5-2 Spacing
700Deflectable Decapolar Electrophysiology Catheter with connector (4F)-110cm usable length with 2-5-2 Spacing
701DuoDecapolar Electrophysiology Catheter-20 Poles (7F) Usable Length 95cm with 5-5-5 Spacing, 1mm band electrode
7028F Sensor Enabled Uni-Directional Circular Mapping Catheter with 3-3-3mm & 5-5-5mm electrode specification, 2mm tip & 1 mm band electrode with Fixed Loop
7038F Sensor Enabled Bi-DirectionalCircular Mapping Catheter DF curve 3-3-3mm- & 5-5-5mm specification, 2mm tip & 1 mm band electrode with Fixed Loop
7048F Sensor Enabled Uni-Directional Circular Mapping Catheter with 6.5mm electrode spacing Variable loop with 15-25 mm range
7058F Sensor Enabled Bi-directional Circular Mapping Catheter with 1-4-1 mm electrode spacing Variable loop with 15-25 mm range
7068F-Irrigated Bidirectional 16 Electrode ,2F Splines, 3 mm spacing , 1mm electrode size,High Density Sensor Enable Mapping Cathter Comaptible with Ensite Mapping system
707Bi-D-Deflectable Radio Frequency Ablation Catheter (7 F, 4mm tip ) 2-5-2 electrode spacing - with Universal Temperature sensor (Thermocouple and Thermistor temperature monitoring capability),should be compatable to use with IBI T11 & Ampere RF
708Uni-D-Deflectable Radio Frequency Ablation Catheter (7 F, 4mm tip ) 2-5-2 electrode spacing, Usable length 110cm ,should be compatable to use with IBI T11 & Ampere RF
709Uni-D-Deflectable Radio Frequency Ablation Catheter (5 F, 4mm tip ) 2-5-2 electrode spacing ,should be compatable to use with IBI T11 & Ampere RF
710Irrigated Bi- Directional ablation Catheter with Flexible tip1-4-1, Symmetric and asymmetric option , should be compatable to use with IBI T11 & Ampere RF Generator
711Irrigated Uni- Directional ablation Catheter with Flexible tip1-4-1, D and F Curve , should be compatable to use with IBI T11 & Ampere RF Generator
712Contact Force Sensor Enable Catheter with Fiber optic Technology for force detection 3.5 MM tip Electrode 8F , Six Saline irrigation hole, 2-2-2 ring spacing,should be compatable to use with IBI T11 & Ampere RF
713Intracardiac ECHO Catheter-9F size ,Transducer type 64 element phased array , Viewing sector80 degrees, Tip DeflectionAnterior/Posterior, Left/Right +/- 120 degree flexion Compatible with Philips Cx50 Echo system
714Magnetic & Impedance (Hybrid) Based patches for electroanotomical mapping for use with Ensite 3D mapping System.
715Magnetic Based patches for electroanotomical mapping for use with Ensite 3D mapping System.
716Cool Point Tubing Set for Irrigated RF Catheter with dedicated pressure sensor and compatible with Abbott Coolpoint Pump
717Cables for Fixed Quadripolar electrophysiology catheters
718Cables for Fixed Decapolar electrophysiology catheters
719Cables for Deflectable Decapolar electrophysiology catheters
720Cables for HighDensity mappingelectrophysiology catheters compatible with Ensite mapping system
721Cables for Ablation range ofelectrophysiology catheters compatible compatable to use with IBI T11 & Ampere RF
722Cable for Fixed loop circular mapping catheters
723Cable for Variable loop circular mapping catheters
724US FDA/CE APPROVED PERMANENT PACEMAKERS WITH ALL LEADS AND ACCESSORIES·VVIR·All single Chamber modes and basic pacing programmable parameters·Must have ventricular capture management·The Size of lead must be 7F or less·The Lead must be steroid eluting and should be both bipolar and unipolar configuration·Must have both active and passive fixation endocardial leads available··Direct presence of Parent Companyin India (not only through the distributors ) and company must provide its trained technical person for each implantation when ever required and forfollow up programming when it is required·Company must provide at least one programmer exclusively to the cardiology dept.·Company must quote only the latest model of devices commercially available
725DCGIAPPROVED PERMANENT PACEMAKERS WITH ALL LEADS AND ACCESSORIES·VVIR·All single Chamber modes and basic pacing programmable parameters·Must have ventricular capture management·The Size of lead must be 7F or less·The Lead must be steroid eluting and should be both bipolar and unipolar configuration·Must have both active and passive fixation endocardial leads available·Life time replacement warranty.·Direct presence of Parent Companyin India (not only through the distributors ) and company must provide its trained technical person for each implantation when ever required and forfollow up programming when it is required·Company must provide at least one programmer exclusively to the cardiology dept.·Company must quote only the latest model of devices commercially available
726D.D.D Pacemaker With All Accessories- DCGI & FDA Approved /CE Approved
727DDDR MRI Pacemaker With All Accessories -DCGI & US FDA/CE approved
728DDDR MRI Pacemaker With All Accessories and Life time Warranty -DCGI & US FDA/CE approved·latest and New 3T Full body MRI, BEAT TO BEAT CAPTURE MGT, ·Algorithm to manage neuro-cardiogenic syncope,·AF Suppression, Optimization of AV delay, Congestion Monitoring.
729DICD-40J Deliver fable energy - -DCGI & US FDA Approved /CE Approved
730CRTP-QUADRIPOLAR-EGM Based Dynamic AV DELAY optimization-DCGI & US FDA Approved /CE Approved·Congestion monitoring algorithm·Capture management for all chambers·Option of Triggered biv pacing during AF·Capable of Wireless telemetry
731CRTP-MULTIPOINT EGM Based Dynamic AV DELAY optimization -DCGI & US FDA Approved /CE Approved·LV LEAD ABLE TO PACE AT TWO POINTS IN LV IN ONE CYCLE·QUDRIPOLAR LEADWITH MRI COMPITABLE DEVICE·Congestion monitoring algorithm·Capture management for all chambers·Option of Triggered biv pacing during AF·Capable of Wireless telemetry
732CRT-D QUADRIOPOLAR DF-4 FDA/CE approved latest and New 40J Deliver fable energy –-DCGI & US FDA Approved /CE Approved·FULL BODY MRI, CONGESTION MONITORINGNG RV LEAD 7F OR LESS·AF SUPPRESSION·EGM Based AV DELAY optimization·Mechanism for Narrow QRS by synchronizing intrinsic and paced pulses
733CRT-D MULTIPOINT DF-4 FDA/CE approved latest and New 40J Deliver fable energy--DCGI & US FDA /CE Approved·FULL BODY MRI, CONGESTION MONITORINGNG RV LEAD 7F OR LESS·AF SUPPRESSION·EGM Based AV DELAY optimization·Mechanism for Narrow QRS by synchronizing intrinsic and paced pulses
734US FDA/CE APPROVED PERMANENT PACEMAKERS WITH ALL LEADS AND ACCESSORIES·DDD·Allmodes and basic pacing programmable parameters including hystersis·The Size of lead must be 6F or less·The Lead must be steroid eluting and should be both bipolar and unipolar configuration·Must have both active and passive fixation endocardial leads available··Direct presence of Parent Companyin India (not only through the distributors ) and company must provide its trained technical person for each implantation when ever required and forfollow up programming when it is required·Company must provide at least one programmer exclusively to the cardiology dept.·Company must quote only the latest model of devices commercially available
735US FDA/CE APPROVED PERMANENT PACEMAKERS WITH ALL LEADS AND ACCESSORIES·DDD·Allmodes and basic pacing programmable parameters including hystersis·The Size of lead must be 6F or less and with HIS bundal pacing lead·The Lead must be steroid eluting and should be both bipolar and unipolar configuration·Must have both active and passive fixation endocardial leads available·Direct presence of Parent Companyin India (not only through the distributors ) and company must provide its trained technical person for each implantation when ever required and forfollow up programming when it is required·Company must provide at least one programmer exclusively to the cardiology dept.·Company must quote only the latest model of devices commercially available
736DCGIAPPROVED PERMANENT PACEMAKERS WITH ALL LEADS AND ACCESSORIES·DDD·Allmodes and basic pacing programmable parameters including hystersis·The Size of lead must be 6F or less and with HIS bundal pacing lead·The Lead must be steroid eluting and should be both bipolar and unipolar configuration·Must have both active and passive fixation endocardial leads available· ·Direct presence of Parent Companyin India (not only through the distributors ) and company must provide its trained technical person for each implantation when ever required and forfollow up programming when it is required·Company must provide at least one programmer exclusively to the cardiology dept.·Company must quote only the latest model of devices commercially available
737DCGI APPROVED PERMANENT PACEMAKERS WITH ALL LEADS AND ACCESSORIES·DDD·Allmodes and basic pacing programmable parameters including hystersis·The Size of lead must be 6F or less- HIS/LBBA PACING·The Lead must be steroid eluting and should be both bipolar and unipolar configuration·Must have both active and passive fixation endocardial leads available·Life time replacement warranty.·Direct presence of Parent Companyin India (not only through the distributors ) and company must provide its trained technical person for each implantation when ever required and forfollow up programming when it is required·Company must provide at least one programmer exclusively to the cardiology dept.·Company must quote only the latest model of devices commercially available
738US FDA/CE APPROVED PERMANENT PACEMAKERS WITH ALL LEADS AND ACCESSORIES·DDDR·Allsingle modes and basic pacing programmable parameters and with special features·Must have approved algorithm for atrial fibrillation suppression with programmable automatic mode switch basel rate.·Must have ventricular capture management- Must have MRI Compitable·Must have P & R wave measurement·The Size of lead must be 6F or less·The Lead must be steroid eluting and should be both bipolar and unipolar configuration·Must have both active and passive fixation endocardial leads available··Direct presence of Parent Companyin India (not only through the distributors ) and company must provide its trained technical person for each implantation when ever required and forfollow up programming when it is required·Company must provide at least one programmer exclusively to the cardiology dept.·Company must quote only the latest model of devices commercially available
739US FDA/CE APPROVED PERMANENT PACEMAKERS WITH ALL LEADS AND ACCESSORIES·DDDR·Allmodes and basic pacing programmable parameters and special features·Must have approved AF suppression algorithm & fluid Monitoring.·Must have ventricular capture management·Must have P & R wave measurement·The Size of lead must be 6F or less·The Lead must be steroid eluting and should be both bipolar and unipolar configuration·Must have both active and passive fixation endocardial leads available·Life time replacement warranty.·Direct presence of Parent Companyin India (not only through the distributors ) and company must provide its trained technical person for each implantation when ever required and forfollow up programming when it is required·Company must provide at least one programmer exclusively to the cardiology dept.·Company must quote only the latest model of devices commercially available
740US FDA/CE APPROVED PERMANENT PACEMAKERS WITH ALL LEADS AND ACCESSORIES·DDDR·Allmodes and basic pacing programmable parameters and special features··Must have ventricular capture management·Must have P & R wave measurement- LBBA Pacing system- Style driven lead·The Size of lead must be 6F or less- Must have congestion monitoring·The Lead must be steroid eluting and should be both bipolar and unipolar configuration·Have feature for optimization of AV delay·Must have both active and passive fixation endocardial leads available·Life term replacement warranty.·Direct presence of Parent Companyin India (not only through the distributors ) and company must provide its trained technical person for each implantation when ever required and forfollow up programming when it is required·Company must provide at least one programmer exclusively to the cardiology dept.·Company must quote only the latest model of devices commercially available
741AICD SINGLE CHAMBER PACEMAKER WITH ALL LEADS - US FDA/CE APPROVED ,ICD WITH ALL LEADS·Single chamber·RV lead must be 7F or less- Must have MRI Compitble·All basic programmable parameters·Lead should be steroid eluting·Should have both active and passive fixation leads·Should be minimum 8+2 year warranty·Direct presence of Parent Companyin India (not only through the distributors ) and company must provide its trained technical person for each implantation when ever required and forfollow up programming when it is required·Company must provide at least one programmer exclusively to the cardiology dept.·Company must quote only the latest model of devices commercially available
742AICD SINGLE CHAMBER PACEMAKER WITH ALL LEADS – DCGIAPPROVED ,ICD WITH ALL LEADS·Single chamber·RV lead must be 7F or less- Must have MRI Compitble·All basic programmable parameters·Lead should be steroid eluting·Should have both active and passive fixation leads·Should be minimum 8+2 year warranty·Direct presence of Parent Companyin India (not only through the distributors ) and company must provide its trained technical person for each implantation when ever required and forfollow up programming when it is required·Company must provide at least one programmer exclusively to the cardiology dept.·Company must quote only the latest model of devices commercially available.
743AICD DUAL CHAMBER PACEMAKER WITH ALL LEADS -US FDA/CE APPROVED ,ICD WITH ALL LEADS AND ALL ACCESSORIES·Dual chamber·RV lead must be 7F or less·All basic programmable parameters·Lead should be steroid eluting·Should have both active and passive fixation leads·Should be minimum 5+3 year warranty·Direct presence of Parent Companyin India (not only through the distributors ) and company must provide its trained technical person for each implantation when ever required and forfollow up programming when it is required·Company must provide at least one programmer exclusively to the cardiology dept.·Company must quote only the latest model of devices commercially available
744AICD DUAL CHAMBER PACEMAKER WITH ALL LEADS- DCGIAPPROVED ,ICD WITH ALL LEADS AND ALL ACCESSORIES·Dual chamber·RV lead must be 9F or less·All basic programmable parameters·Lead should be steroid eluting·Should have both active and passive fixation leads·Should be minimum 5+3 year warranty·Direct presence of Parent Companyin India (not only through the distributors ) and company must provide its trained technical person for each implantation when ever required and forfollow up programming when it is required·Company must provide at least one programmer exclusively to the cardiology dept.·Company must quote only the latest model of devices commercially available
745AICD SINGLE CHAMBER DEVICE WITH ALL LEADS -ICD WITH ALL LEADS AND ALL ACCESSORIES - DCGIAND US FDA/ CEAPPROVED·Should have latest Bluetooth technology Low energy communication enabling smart phone connectivity through secured data encryption.·Should have multi point pacing delivers multiple LV pacing pulse/cardiac cycle in both LV and Biv pacing modes.·Should have Improvised SYNC-AV pulse CRT technology offer dynamic AV timing.·40 J delivered energy for enhanced safety margin ·Should have full body 3-Tesla MRI compatibility.·Direct presence of Parent Companyin India (not only through the distributors) and company must provide its trained technical person for each implantation whenever required and forfollow up programming when it is required.·Company must provide at least one programmer exclusively to the cardiology dept.,·Company must quote only the latest model of devices commercially available.
746AICD DUAL CHAMBER DEVICE WITH ALL LEADS -ICD WITH ALL LEADS AND ALL ACCESSORIES - DCGIAND US FDA/ CEAPPROVED·Should have latest Bluetooth technology Low energy communication enabling smart phone connectivity through secured data encryption.·Should have multi point pacing delivers multiple LV pacing pulse/cardiac cycle in both LV and Biv pacing modes.·Should have Improvised SYNC-AV pulse CRT technology offer dynamic AV timing.·40 J delivered energy for enhanced safety margin·Should have full body 3-Tesla MRI compatibility.·Direct presence of Parent Companyin India (not only through the distributors) and company must provide its trained technical person for each implantation whenever required and forfollow up programming when it is required.·Company must provide at least one programmer exclusively to the cardiology dept.,·Company must quote only the latest model of devices commercially available
747US FDA/CE APPROVED, BIVENTRICULAR PACEMAKER WITH ATRIAL,RV, LV LEADS AND ALL ACCESSORIES REQUIRED DURING IMPLANTATION·Must have separate programmable RV, LV lead amplitude, pulse width and VV delay and should have following special features·Must have facility for EGM based optimization of AV, PV and VV delays·The size of atrial and RV leads should be 7F or less·The leads should be steroid eluting and should be bipolar and unkipolar configuration·Should have both active and passive fixation RA & RV endocardial leads·Should have epicardial lead for epicardial LV lead implantation·Replacement warranty not less than 5 years·Direct presence of Parent Companyin India (not only through the distributors ) and company must provide its trained technical person for each implantation when ever required and forfollow up programming when it is required·Company must provide at least one programmer exclusively to the cardiology dept.·Company must quote only the latest model of devices commercially available
748DCGIAPPROVED, BIVENTRICULAR PACEMAKER WITH ATRIAL,RV, LV LEADS AND ALL ACCESSORIES REQUIRED DURING IMPLANTATION·Must have separate programmable RV, LV lead amplitude, pulse width and VV delay and should have following special features·Must have facility for EGM based optimization of AV, PV and VV delays·The size of atrial and RV leads should be 7F or less·The leads should be steroid eluting and should be bipolar and unkipolar configuration·Should have both active and passive fixation RA & RV endocardial leads·Should have epicardial lead for epicardial LV lead implantation·Replacement warranty not less than 5 years·Direct presence of Parent Companyin India (not only through the distributors ) and company must provide its trained technical person for each implantation when ever required and forfollow up programming when it is required·Company must provide at least one programmer exclusively to the cardiology dept.
749US FDA/CE APPROVED BIVENTRICULAR PACEMAKER + ICD (COMBO DEVICE) WITH ATRIAL, RV, LV LEADS AND ALLACCESSORIES RQUIRED DURING IMPANTATION·Must have all basic programmable parameters·Must have separate programmable RV, LV lead amplitude, pulse width and VV delay·The leads should be steroid eluting·Should have both active and passive fixation RA & RV endocardial leadsr- RV LEAD 7F OR LESS·Should have epicardial lead for epicardial LV lead implantation·Replacement warranty not less than 3 + 2 years·Direct presence of Parent Companyin India (not only through the distributors ) and company must provide its trained technical person for each implantation when ever required and forfollow up programming when it is required·Company must provide at least one programmer exclusively to the cardiology dept.·Company must quote only the latest model of devices commercially available
750DCGIAPPROVED BIVENTRICULAR PACEMAKER + ICD (COMBO DEVICE) WITH ATRIAL, RV, LV LEADS AND ALL ACCESSORIESRQUIRED DURING IMPANTATION·Must have all basic programmable parameters·Must have separate programmable RV, LV lead amplitude, pulse width and VV delay·The leads should be steroid eluting·Should have both active and passive fixation RA & RV endocardial leads·Should have epicardial lead for epicardial LV lead implantation·Replacement warranty not less than 3 + 2 years·Direct presence of Parent Companyin India (not only through the distributors ) and company must provide its trained technical person for each implantation when ever required and forfollow up programming when it is required·Company must provide at least one programmer exclusively to the cardiology dept.·Company must quote only the latest model of devices commercially available
751US FDA/CE APPROVED BIVENTRICULAR PACEMAKER + ICD (COMBO DEVICE) WITH ATRIAL, RV, LV LEADS AND ALL ACCESSORIES RQUIRED DURING IMPANTATION·Must have Quadripolar lead for LV pacing·Must have all basic programmable parameters with following special features·Facility of ATP during charging for defibrillation·Must have separate programmable RV, LV lead amplitude, pulse width and VV delay·Must have fluidmonitoring system- RV LEAD 7F OR LESS·The leads should be steroid eluting·Should have both active and passive fixation RA & RV endocardial leads·Should have epicardial lead for epicardial LV lead implantation·Replacement warranty not less than 3 + 2 years·Direct presence of Parent Companyin India (not only through the distributors ) and company must provide its trained technical person for each implantation when ever required and forfollow up programming when it is required·Company must provide at least one programmer exclusively to the cardiology dept.
752DCGIAPPROVED BIVENTRICULAR PACEMAKER + ICD (COMBO DEVICE) WITH ATRIAL, RV, LV LEADS AND ALL ACCESSORIES RQUIRED DURING IMPANTATION·Must have Quadripolar lead for LV pacing·Must have all basic programmable parameters with following special features·Facility of ATP during charging for defibrillation·Must have separate programmable RV, LV lead amplitude, pulse width and VV delay·Must have fluidmonitoring system·The leads should be steroid eluting·Should have both active and passive fixation RA & RV endocardial leads·Should have epicardial lead for epicardial LV lead implantation·Replacement warranty not less than 3 + 2 years·Direct presence of Parent Companyin India (not only through the distributors ) and company must provide its trained technical person for each implantation when ever required and forfollow up programming when it is required·Company must provide at least one programmer exclusively to the cardiology dept.·Company must quote only the latest model of devices commercially available
753US FDA/CE APPROVED BIVENTRICULAR PACEMAKER + ICD (COMBO DEVICE) WITH ATRIAL, RV, LV LEADS AND ALLACCESSORIES RQUIRED DURING IMPANTATION·Must have separate programmable RV, LV lead amplitude, pulse width and VV delay and shouldhave following special feature·The LV lead must be Quadripolar.- RV LEAD MUST BE 7F OR LESS·The leads should be steroid elutingand should be both bipolar and unipolar·Should have both active and passive fixation RA & RV endocardial leads·Should have epicardial lead for epicardial LV lead implantation·Replacement warranty not less than 3 + 2 years·Direct presence of Parent Companyin India (not only through the distributors ) and company must provide its trained technical person for each implantation when ever required and forfollow up programming when it is required·Company must provide at least one programmer exclusively to the cardiology dept.·Company must quote only the latest model of devices commercially available
754DCGIAPPROVED BIVENTRICULAR PACEMAKER + ICD (COMBO DEVICE) WITH ATRIAL, RV, LV LEADS AND ALL ACCESSORIESRQUIRED DURING IMPANTATION·Must have separate programmable RV, LV lead amplitude, pulse width and VV delay and shouldhave following special feature·The LV lead must be Quadripolar.·The leads should be steroid elutingand should be both bipolar and unipolar·Should have both active and passive fixation RA & RV endocardial leads·Should have epicardial lead for epicardial LV lead implantation·Replacement warranty not less than 3 + 2 years·Direct presence of Parent Companyin India (not only through the distributors ) and company must provide its trained technical person for each implantation when ever required and forfollow up programming when it is required·Company must provide at least one programmer exclusively to the cardiology dept.·Company must quote only the latest model of devices commercially available
755Lead Less Pacemaker with All Accessories.–DCGIAND US FDA/ CE APPROVED VVI,MRI COMPITABLEMUST HAVE RETRIEVABLE OPTION
756Lead Less Pacemaker with All Accessories.–DCGIAND US FDA/ CE APPROVED DDDMRI COMPITABLEMUST HAVE RETRIEVABLE OPTION
757CRT- D Combo DEVICE WITH ALL LEADS -ICD WITH ALL LEADS AND ALL ACCESSORIES - DCGIAND US FDA/ CE APPROVED·Should have latest Bluetooth technology Low energy communication enabling smart phone connectivity through secured data encryption.·Should have multi point pacing delivers multiple LV pacing pulse/cardiac cycle in both LV and BIV pacing modes.·Should have Improvised SYNC-AV pulse CRT technology offer dynamic AV timing.·40 J delivered energy for enhanced safety margin·Should have full body 3-Tesla MRI compatibility.
758DCGIAPPROVED PERMANENT PACEMAKERS WITH ALL LEADS AND ACCESSORIESVVI All single Chamber modes and basic pacing programmable parameters The Size of lead must be 7F or less The Lead must be steroid eluting and should be both bipolar and unipolar configuration Must have both active and passive fixation endocardial leads available Life time replacement warranty. Direct presence of Parent Companyin India (not only through the distributors ) and company must provide its trained technical person for each implantation when ever required and forfollow up programming when it is required Company must provide at least one programmer exclusively to the cardiology dept. Company must quote only the latest model of devices commercially available\"
759US FDA/CE APPROVED PERMANENT PACEMAKERS WITH ALL LEADS AND ACCESSORIES VVIR All single Chamber modes and basic pacing programmable parameters Must have MRI Compatible Must have programmable sensor control rest rate Must have ventricular capture management The Size of lead must be 8F or less The Lead must be steroid eluting and should be both bipolar and uni-polar configuration Must have both active and passive fixation endo-cardial leads available Life time replacement warranty. Direct presence of Parent Companyin India (not only through the distributors ) and company must provide its trained technical person for each implantation when ever required and forfollow up programming when it is required
760DCGIAPPROVED PERMANENT PACEMAKERS WITH ALL LEADS AND ACCESSORIES VVIR All single Chamber modes and basic pacing programmable parameters Must have MRI Compatible Must have programmable sensor control rest rate Must have ventricular capture management The Size of lead must be 8F or less The Lead must be steroid eluting and should be both bipolar and uni-polar configuration Must have both active and passive fixation endo- cardial leads available Life time replacement warranty. Direct presence of Parent Companyin India (not only through the distributors ) and company must provide its trained technical person for each implantation when ever required and forfollow up programming when it is required Company must provide at least one programmer exclusively to the cardiology dept.Company must quote only the latest model of devices commercially available\"
761US FDA/CE APPROVED PERMANENT PACEMAKERS WITH ALL LEADS AND ACCESSORIES• VVIR• All single Chamber modes and basic pacing programmable parameters• Must have MRI Compatible• Must have programmable sensor control rest rate• Must have ventricular capture management• The Size of lead must be 8F or less• The Lead must be steroid eluting and should be both bipolar and uni-polar configuration• Must have both active and passive fixation endo-cardial leads available• Life time replacement warranty.• Direct presence of Parent Company in India (not only through the distributors ) and company must provide its trained technical person for each implantation when ever required and for follow up programming when it is required• Company must provide at least one programmer exclusively to the cardiology dept. Company must quote only the latest model of devices commercially available.
762V.V.I Pacemaker With All Accessories and Life time Warranty -DCGI & US FDA/CE approved• latest and New Full body MRI, BEAT TO BEAT CAPTURE MGT,
763D.D.D Pacemaker With All Accessories and Life time Warranty- DCGI & FDA Approved /CE Approved
764DDDR MRI Pacemaker With All Accessories and Life time Warranty -DCGI & US FDA/CE approved
765SICD (AICD) DF1 CONNECTOR--DCGI & US FDA Approved /CE
766DICD-40J Deliver fable energy - -DCGI & US FDA Approved /CE Approved
767CRTP-QUADRIPOLAR-EGM Based Dynamic AV DELAY optimization-DCGI & US FDA Approved /CE Approved Congestion monitoring algorithm Capture management for all chambers Option of Triggered biv pacing during AF,  Capable of Wireless telemetry\"
768CRT-D QUADRIOPOLAR DF-4 FDA/CE approved latest and New 40J Deliver fable energy –-DCGI & US FDA Approved /CE Approved·FULL BODY MRI, CONGESTION MONITORINGNG·AF SUPPRESSION·EGM Based AV DELAY optimization·Mechanism for Narrow QRS by synchronizing intrinsic and paced pulses
769CRT-D MULTIPOINT DF-4 FDA/CE approved latest and New 40J Deliver fable energy--DCGI & US FDA /CE Approved·FULL BODY MRI, CONGESTION MONITORINGNG·AF SUPPRESSION·EGM Based AV DELAY optimization·Mechanism for Narrow QRS by synchronizing intrinsic and paced pulses
770Sub-cutenous ICD IMPLANT (SC- I.C.D.)with All Accessories- DCGI & US FDA Approved /CE Approved
771PERMANENT PACEMAKERS WITH ALL LEADS AND ACCESSORIES - US FDA/CE APPROVED VDD All VDD & single Chamber modes and basic pacing programmable parameters and with following special features Must have ventricular capture management The Size of lead must be 9F or less The Lead must be steroid eluting and should be both bipolar configuration Having passive fixation endocardial leads available Life time replacement warranty. Direct presence of Parent Companyin India (not only through the distributors ) and company must provide its trained technical person for each implantation when ever required and forfollow up programming when it is required Company must provide at least one programmer exclusively to the cardiology dept. Company must quote only the latest model of devices commercially available.\"
772PERMANENT PACEMAKERS WITH ALL LEADS AND ACCESSORIES - DCGIAPPROVED VDD All VDD & single Chamber modes and basic pacing programmable parameters and with following special features Must have ventricular capture management The Size of lead must be 9F or less The Lead must be steroid eluting and should be both bipolar configuration Having passive fixation endocardial leads available Life time replacement warranty. Direct presence of Parent Companyin India (not only through the distributors ) and company must provide its trained technical person for each implantation when ever required and forfollow up programming when it is required Company must provide at least one programmer exclusively to the cardiology dept.Company must quote only the latest model of devices commercially available\"
773US FDA/CE APPROVED PERMANENT PACEMAKERS WITH ALL LEADS AND ACCESSORIES \" DDD Allmodes and basic pacing programmable parameters including hystersis The Size of lead must be 7F or less The Lead must be steroid eluting and should be both bipolar and unipolar configuration Must have both active and passive fixation endocardial leads available Life time replacement warranty. Direct presence of Parent Companyin India (not only through the distributors ) and company must provide its trained technical person for each implantation when ever required and forfollow up programming when it is required Company must provide at least one programmer exclusively to the cardiology dept. Company must quote only the latest model of devices commercially available\"
774DCGIAPPROVED PERMANENT PACEMAKERS WITH ALL LEADS AND ACCESSORIES \" DDD Allmodes and basic pacing programmable parameters including hystersis The Size of lead must be 7F or less The Lead must be steroid eluting and should be both bipolar and unipolar configuration Must have both active and passive fixation endocardial leads available Life time replacement warranty. Direct presence of Parent Companyin India (not only through the distributors ) and company must provide its trained technical person for each implantation when ever required and forfollow up programming when it is required Company must provide at least one programmer exclusively to the cardiology dept. Company must quote only the latest model of devices commercially available\"
775US FDA/CE APPROVED PERMANENT PACEMAKERS WITH ALL LEADS AND ACCESSORIES \" DDDR Allsingle modes and basic pacing programmable parameters and with special features Must have approved algorithm for atrial fibrillation suppression with programmable automatic mode switch basel rate. Must have ventricular capture management Must have P & R wave measurement The Size of lead must be 7F or less The Lead must be steroid eluting and should be both bipolar and unipolar configuration Must have both active and passive fixation endocardial leads available Life time replacement warranty. Direct presence of Parent Companyin India (not only through the distributors ) and company must provide its trained technical person for each implantation when ever required and forfollow up programming when it is required Company must provide at least one programmer exclusively to the cardiology dept. Company must quote only the latest model of devices commercially available\"
776US FDA/CE APPROVED PERMANENT PACEMAKERS WITH ALL LEADS AND ACCESSORIES DDDR Allmodes and basic pacing programmable parameters and special features Must have approved Atrial Tachycardia management algorithm & fluid Monitoring. Must have ventricular capture management Must have P & R wave measurement The Size of lead must be 7F or less The Lead must be steroid eluting and should be both bipolar and unipolar configuration Must have both active and passive fixation endocardial leads available Life time replacement warranty. Direct presence of Parent Companyin India (not only through the distributors ) and company must provide its trained technical person for each implantation when ever required and forfollow up programming when it is required Company must provide at least one programmer exclusively to the cardiology dept. Company must quote only the latest model of devices commercially available\"
777AICD SINGLE CHAMBER PACEMAKER WITH ALL LEADS - US FDA/CE APPROVED ,ICD WITH ALL LEADS\" Single chamber RV lead must be 9F or less All basic programmable parameters Lead should be steroid eluting Should have both active and passive fixation leads Should be minimum 5+3 year warranty Direct presence of Parent Companyin India (not only through the distributors ) and company must provide its trained technical person for each implantation when ever required and forfollow up programming when it is required Company must provide at least one programmer exclusively to the cardiology dept. Company must quote only the latest model of devices commercially available\"
778AICD SINGLE CHAMBER PACEMAKER WITH ALL LEADS – DCGIAPPROVED ,ICD WITH ALL LEADS \" Single chamber RV lead must be 9F or less All basic programmable parameters Lead should be steroid eluting Should have both active and passive fixation leads Should be minimum 5+3 year warranty Direct presence of Parent Companyin India (not only through the distributors ) and company must provide its trained technical person for each implantation when ever required and forfollow up programming when it is required Company must provide at least one programmer exclusively to the cardiology dept. Company must quote only the latest model of devices commercially available.\"
779AICD DUAL CHAMBER PACEMAKER WITH ALL LEADS -US FDA/CE APPROVED ,ICD WITH ALL LEADS AND ALL ACCESSORIES \" Dual chamber RV lead must be 9F or less All basic programmable parameters Lead should be steroid eluting Should have both active and passive fixation leads Should be minimum 5+3 year warranty Direct presence of Parent Companyin India (not only through the distributors ) and company must provide its trained technical person for each implantation when ever required and forfollow up programming when it is required Company must provide at least one programmer exclusively to the cardiology dept. Company must quote only the latest model of devices commercially available\"
780AICD DUAL CHAMBER PACEMAKER WITH ALL LEADS- DCGIAPPROVED ,ICD WITH ALL LEADS AND ALL ACCESSORIES \" Dual chamber RV lead must be 9F or less All basic programmable parameters Lead should be steroid eluting Should have both active and passive fixation leads Should be minimum 5+3 year warranty Direct presence of Parent Companyin India (not only through the distributors ) and company must provide its trained technical person for each implantation when ever required and forfollow up programming when it is required Company must provide at least one programmer exclusively to the cardiology dept. Company must quote only the latest model of devices commercially available\"
781AICD DUAL CHAMBER PACEMAKER WITH ALL LEADS- US FDA/CE APPROVED ,ICD WITH ALL LEADS AND ALL ACCESSORIES Dual chamber All basic programmable parameters Must have shockreduction technology with fluid monitoring Lead should be steroid eluting Lead Should be DF-1& DF-4 compatible Replacement warranty as per norms Direct presence of Parent Companyin India (not only through the distributors ) and company must provide its trained technical person for each implantation when ever required and forfollow up programming when it is required Company must provide at least one programmer exclusively to the cardiology dept.
782AICD DUAL CHAMBER PACEMAKER WITH ALL LEADS - DCGI APPROVED, ICD WITH ALL LEADS AND ALL ACCESSORIES \" Dual chamber All basic programmable parameters Must have shockreduction technology with fluid monitoring Lead should be steroid eluting Lead Should be DF-1& DF-4 compatible Replacement warranty as per norms Direct presence of Parent Companyin India (not only through the distributors ) and company must provide its trained technical person for each implantation when ever required and forfollow up programming when it is required Company must provide at least one programmer exclusively to the cardiology dept. Company must quote only the latest model of devices commercially available\"
783D/C ICD SINGLE CHAMBER DEVICE MRI WITH ALL LEADS AND ALL ACCESSORIES - DCGIAND US FDA/ CE APPROVED \" Should have advanced feature of automatic AV Search, and Adjustable AV delay etc. Direct presence of Parent Company in India (not only through the distributors) and company must provide its trained technical person for each implantation whenever required and for follow up programming when it is required. Company must provide at least one programmer exclusively to the cardiology dept., Company must quote only the latest model of devices commercially available.\"
784S/C ICD SINGLE CHAMBER DEVICE MRI WITH ALL LEADS AND ALL ACCESSORIES - DCGIAND US FDA/ CE APPROVED \" Should have labelled PROJECTED longevity of > 12years with warranty not less than 8 + 2 years. Direct presence of Parent Company in India (not only through the distributors) and company must provide its trained technical person for each implantation whenever required and for follow up programming when it is required. Company must provide at least one programmer exclusively to the cardiology dept., Company must quote only the latest model of devices commercially available.\"
785US FDA/CE APPROVED IMPLANTABLE LOOP RECORDER \" Must be able to detect Asystole, Brady arrhythmia and VT/FVT Must have the storage capacity of >45 minutes. Must have dynamic sensing threshold for R wave sensing along with noise reversion Must have a patient tool for symptomatic recording Must have at least 35 months of longevity Must be compatible with remote monitoring devices,  Direct presence of Parent Companyin India (not only through the distributors ) and company must provide its trained technical person for each implantation whenever required and forfollow up programming when it is required Company must provide at least one programmer exclusively to the cardiology dept. Company must quote only the latest model of devices commercially available\"
786DCGI APPROVED IMPLANTABLE LOOP RECORDER \" Must be able to detect Asystole, Bradyarrhythmia and VT/FVT Must have the storage capacity of >45 minutes. Must have dynamic sensing threshold for R wave sensing along with noise reversion Must have a patient tool for symptomatic recording Must have at least 35 months of longevity Must be compatible with remote monitoring devices Direct presence of Parent Companyin India (not only through the distributors ) and company must provide its trained technical person for each implantation whenever required and forfollow up programming when it is required Company must provide at least one programmer exclusively to the cardiology dept. Company must quote only the latest model of devices commercially available\"
787US FDA/CE APPROVED IMPLANTABLE LOOP RECORDER for AF DETECTION \" Must be able to detect Asystole, Bradyarrhythmia, VT/FVT and AT/AF Must have the storage capacity of >45 minutes. Must have dynamic sensing threshold for R wave sensing along with noise reversion Must have a patient tool for symptomatic recording along with alerts. Must be able to give AF burden reports to monitor the progress of chronic AF patients. Must have at least 35 months of longevity Must be compatible with remote monitoring devices Direct presence of Parent Companyin India (not only through the distributors ) and company must provide its trained technical person for each implantation whenever required and forfollow up programming when it is required Company must provide at least one programmer exclusively to the cardiology dept. Company must quote only the latest model of devices commercially available\"
788 DCGI APPROVED IMPLANTABLE LOOP RECORDER for AF DETECTIONMust be able to detect Asystole, Brady-arrhythmia, VT/FVT and AT/AF Must have the storage capacity of >45 minutes. Must have dynamic sensing threshold for R wave sensing along with noise reversion Must have a patient tool for symptomatic recording along with alerts. Must be able to give AF burden reports to monitor the progress of chronic AF patients. Must have at least 35 months of longevity Must be compatible with remote monitoring devices,  Direct presence of Parent Companyin India (not only through the distributors ) and company must provide its trained technical person for each implantation whenever required and forfollow up programming when it is required Company must provide at least one programmer exclusively to the cardiology dept. Company must quote only the latest model of devices commercially available\"
789\"US FDA/CE APPROVED, BIVENTRICULAR PACEMAKER WITH ATRIAL,RV, LV LEADS AND ALL ACCESSORIES REQUIRED DURINGIMPLANTATION\" Must have separate programmable RV, LV lead amplitude, pulse width and VV delay and should have following special features Must have facility for EGM based optimization of AV, PV and VV delays The size of atrial and RV leads should be 7F or less The leads should be steroid eluting and should be bipolar and unkipolar configuration Should have both active and passive fixation RA & RV endocardial leads Should have epicardial lead for epicardial LV lead implantation Replacement warranty not less than 5 years Direct presence of Parent Companyin India (not only through the distributors ) and company must provide its trained technical person for each implantation when ever required and forfollow up programming when it is required Company must provide at least one programmer exclusively to the cardiology dept. Company must quote only the latest model of devices commercially available\"
790DCGIAPPROVED, BIVENTRICULAR PACEMAKER WITH ATRIAL,RV, LV LEADS AND ALL ACCESSORIES REQUIRED DURING IMPLANTATION Must have separate programmable RV, LV lead amplitude, pulse width and VV delay and should have following special features Must have facility for EGM based optimization of AV, PV and VV delays The size of atrial and RV leads should be 7F or less The leads should be steroid eluting and should be bipolar and unkipolar configuration Should have both active and passive fixation RA & RV endocardial leads Should have epicardial lead for epicardial LV lead implantation Replacement warranty not less than 5 years Direct presence of Parent Companyin India (not only through the distributors ) and company must provide its trained technical person for each implantation when ever required and forfollow up programming when it is required Company must provide at least one programmer exclusively to the cardiology dept. Company must quote only the latest model of devices commercially available\"
791US FDA/CE APPROVED BIVENTRICULAR PACEMAKER + ICD (COMBO DEVICE) WITH ATRIAL, RV, LV LEADS AND ALL ACCESSORIES RQUIRED DURING IMPANTATION\" Must have all basic programmable parameters Must have separate programmable RV, LV lead amplitude, pulse width and VV delay The leads should be steroid eluting Should have both active and passive fixation RA & RV endocardial leads Should have epicardial lead for epicardial LV lead implantation Replacement warranty not less than 3 + 2 years Direct presence of Parent Companyin India (not only through the distributors ) and company must provide its trained technical person for each implantation when ever required and forfollow up programming when it is required Company must provide at least one programmer exclusively to the cardiology dept. Company must quote only the latest model of devices commercially available\"
792\"DCGIAPPROVED BIVENTRICULAR PACEMAKER + ICD (COMBO DEVICE) WITH ATRIAL, RV, LV LEADS AND ALL ACCESSORIES RQUIRED DURING IMPANTATION\" Must have all basic programmable parameters Must have separate programmable RV, LV lead amplitude, pulse width and VV delay The leads should be steroid eluting Should have both active and passive fixation RA & RV endocardial leads Should have epicardial lead for epicardial LV lead implantation Replacement warranty not less than 3 + 2 years Direct presence of Parent Companyin India (not only through the distributors ) and company must provide its trained technical person for each implantation when ever required and forfollow up programming when it is required Company must provide at least one programmer exclusively to the cardiology dept. Company must quote only the latest model of devices commercially available\"
793US FDA/CE APPROVED, BIVENTRICULAR PACEMAKER + ICD (COMBO DEVICE) WITHOUT LEAD• Must have all basic programmable parameters• Should have all parameters shown in related group of pacemaker• Replacement warranty not less than 5 years• Direct presence of Parent Companyin India (not only through the distributors ) and company must provide its trained technical person for each implantation when ever required and forfollow up programming when it is required• Company must provide at least one programmer exclusively to the cardiology dept.• Company must quote only the latest model of devices commercially available\"
794DCGI APPROVED, BIVENTRICULAR PACEMAKER + ICD (COMBO DEVICE) WITHOUT LEAD Must have all basic programmable parameters•Should have all parameters shown in related group of pacemaker•Replacement warranty not less than 5 years•Direct presence of Parent Companyin India (not only through the distributors ) and company must provide its trained technical person for each implantation when ever required and forfollow up programming when it is required•Company must provide at least one programmer exclusively to the cardiology dept. • Company must quote only the latest model of devices commercially available\"
795US FDA/CE APPROVED, BIVENTRICULAR PACEMAKER (CRT) WITHOUT LEAD Must have all basic programmable parameters Should have all parameters shown in related group of pacemaker Replacement warranty not less than 5 years Direct presence of Parent Companyin India (not only through the distributors ) and company must provide its trained technical person for each implantation when ever required and forfollow up programming when it is required Company must provide at least one programmer exclusively to the cardiology dept. Company must quote only the latest model of devices commercially available
796DCGI APPROVED, BIVENTRICULAR PACEMAKER (CRT) WITHOUT LEAD Must have all basic programmable parameters Should have all parameters shown in related group of pacemaker Replacement warranty not less than 5 years Direct presence of Parent Companyin India (not only through the distributors ) and company must provide its trained technical person for each implantation when ever required and forfollow up programming when it is required Company must provide at least one programmer exclusively to the cardiology dept. Company must quote only the latest model of devices commercially available\"
797US FDA/CE APPROVED, AICD DUAL CHAMBER PACEMAKER WITHOUT LEAD Must have all basic programmable parameters Should have all parameters shown in related group of pacemaker Replacement warranty not less than 5 years Direct presence of Parent Companyin India (not only through the distributors ) and company must provide its trained technical person for each implantation when ever required and forfollow up programming when it is required Company must provide at least one programmer exclusively to the cardiology dept. Company must quote only the latest model of devices commercially available\"
798DCGIAPPROVED, AICD DUAL CHAMBER PACEMAKER WITHOUT LEAD Must have all basic programmable parameters Should have all parameters shown in related group of pacemaker Replacement warranty not less than 5 years Direct presence of Parent Companyin India (not only through the distributors ) and company must provide its trained technical person for each implantation when ever required and forfollow up programming when it is required Company must provide at least one programmer exclusively to the cardiology dept. Company must quote only the latest model of devices commercially available\"
799US FDA/CE APPROVED, AICD SINGLECHAMBER PACEMAKER WITHOUT LEADMust have all basic programmable parameters Should have all parameters shown in related group of pacemaker Replacement warranty not less than 5 years Direct presence of Parent Companyin India (not only through the distributors ) and company must provide its trained technical person for each implantation when ever required and forfollow up programming when it is required Company must provide at least one programmer exclusively to the cardiology dept. Company must quote only the latest model of devices commercially available\"
800DCGIAPPROVED, AICD SINGLECHAMBER PACEMAKER WITHOUT LEAD Must have all basic programmable parameters Should have all parameters shown in related group of pacemaker Replacement warranty not less than 5 years Direct presence of Parent Companyin India (not only through the distributors ) and company must provide its trained technical person for each implantation when ever required and forfollow up programming when it is required Company must provide at least one programmer exclusively to the cardiology dept. Company must quote only the latest model of devices commercially available\"
801 US FDA/CE APPROVED, VDD/VDDR PERMANENT PACEMAKER WITHOUT LEA VDD/VDDR All VDD & single chamber modes and basic pacingprogrammable parameters and with following special features Should have all parameters shown in related group of pacemaker Life term replacement warranty Direct presence of Parent Companyin India (not only through the distributors ) and company must provide its trained technical person for each implantation when ever required and forfollow up programming when it is required Company must provide at least one programmer exclusively to the cardiology dept. Company must quote only the latest model of devices commercially available\"
802DCGIAPPROVED, VDD/VDDR PERMANENT PACEMAKER WITHOUT LEAD VDD/VDDR All VDD & single chamber modes and basic pacingprogrammable parameters and with following special features Should have all parameters shown in related group of pacemaker Life term replacement warranty Direct presence of Parent Companyin India (not only through the distributors ) and company must provide its trained technical person for each implantation when ever required and forfollow up programming when it is required Company must provide at least one programmer exclusively to the cardiology dept. Company must quote only the latest model of devices commercially available
803US FDA/CE APPROVED, DDD PERMANENT PACEMAKER WITHOUT LEAD DDD All modes and basic pacingprogrammable parameters including hysteresis Should have all parameters shown in related group of pacemaker Life term replacement warranty Direct presence of Parent Companyin India (not only through the distributors ) and company must provide its trained technical person for each implantation when ever required and forfollow up programming when it is required Company must provide at least one programmer exclusively to the cardiology dept. Company must quote only the latest model of devices commercially available
804DCGIAPPROVED, DDD PERMANENT PACEMAKER WITHOUT LEAD DDD All modes and basic pacingprogrammable parameters including hysteresis Should have all parameters shown in related group of pacemaker Life term replacement warranty Direct presence of Parent Companyin India (not only through the distributors ) and company must provide its trained technical person for each implantation when ever required and forfollow up programming when it is required Company must provide at least one programmer exclusively to the cardiology dept.Company must quote only the latest model of devices commercially available
805US FDA/CE APPROVED, VVI PERMANENT PACEMAKER WITHOUT LEAD VVI All single chamber modes and basic pacingprogrammable parameters Should have all parameters shown in related group of pacemaker Life term replacement warranty Direct presence of Parent Companyin India (not only through the distributors ) and company must provide its trained technical person for each implantation when ever required and forfollow up programming when it is required Company must provide at least one programmer exclusively to the cardiology dept. Company must quote only the latest model of devices commercially available\"
806DCGIAPPROVED, VVI PERMANENT PACEMAKER WITHOUT LEAD VVI All single chamber modes and basic pacingprogrammable parameters Should have all parameters shown in related group of pacemaker Life term replacement warranty Direct presence of Parent Companyin India (not only through the distributors ) and company must provide its trained technical person for each implantation when ever required and forfollow up programming when it is required Company must provide at least one programmer exclusively to the cardiology dept. Company must quote only the latest model of devices commercially available
807US FDA/CE APPROVED, VVIRPERMANENT PACEMAKER WITHOUT LEAD VVIR All single chamber modes and basic pacingprogrammable parameters Should have all parameters shown in related group of pacemaker Life term replacement warranty Direct presence of Parent Companyin India (not only through the distributors ) and company must provide its trained technical person for each implantation when ever required and forfollow up programming when it is required Company must provide at least one programmer exclusively to the cardiology dept. Company must quote only the latest model of devices commercially available
808DCGIAPPROVED, VVIRPERMANENT PACEMAKER WITHOUT LEADVVIR All single chamber modes and basic pacingprogrammable parameters Should have all parameters shown in related group of pacemaker Life term replacement warranty Direct presence of Parent Companyin India (not only through the distributors ) and company must provide its trained technical person for each implantation when ever required and forfollow up programming when it is required Company must provide at least one programmer exclusively to the cardiology dept. Company must quote only the latest model of devices commercially available\"
809US FDA/CE APPROVED, VVIRPERMANENT PACEMAKER WITHOUT LEAD DDDR MRI compatible Life term replacement warranty Direct presence of Parent Companyin India (not only through the distributors ) and company must provide its trained technical person for each implantation when ever required and forfollow up programming when it is required Company must provide at least one programmer exclusively to the cardiology dept. Company must quote only the latest model of devices commercially available\"
810DCGIAPPROVED, VVIRPERMANENT PACEMAKER WITHOUT LEADDDDR MRI compatible Life term replacement warranty Direct presence of Parent Companyin India (not only through the distributors ) and company must provide its trained technical person for each implantation when ever required and forfollow up programming when it is required Company must provide at least one programmer exclusively to the cardiology dept. Company must quote only the latest model of devices commercially available\"
811US FDA/CE APPROVED, ATRIAL, RV. LV LEADS AND ALL ACCESSORIES FOR BIVENTRICULAR PACEMAKER (CRT)A ATRIAL LEADB RV LEADC LV LEADShould have all parameters shown in related group of pacemakerDirect presence of Parent Companyin India (not only through the distributors ) and company must provide its trained technical person for each implantation when ever required and forfollow up programming when it is requiredCompany must provide at least one programmer exclusively to the cardiology dept. Company must quote only the latest model of devices commercially available
812DCGI APPROVED, ATRIAL, RV. LV LEADS AND ALL ACCESSORIES FOR BIVENTRICULAR PACEMAKER (CRT) A ATRIAL LEAD B RV LEAD C LV LEAD Should have all parameters shown in related group of pacemaker Direct presence of Parent Companyin India (not only through the distributors ) and company must provide its trained technical person for each implantation when ever required and forfollow up programming when it is required Company must provide at least one programmer exclusively to the cardiology dept. Company must quote only the latest model of devices commercially available
813US FDA/CE APPROVED, RV LEAD FOR AICD SINGLE CHAMBER Must have all specifications shown in related group of pacemaker RV lead for AICD Single chamber Direct presence of Parent Companyin India (not only through the distributors ) and company must provide its trained technical person for each implantation when ever required and forfollow up programming when it is required Company must provide at least one programmer exclusively to the cardiology dept.
814DCGIAPPROVED, RV LEAD FOR AICD SINGLE CHAMBER Must have all specifications shown in related group of pacemaker RV lead for AICD Single chamber Direct presence of Parent Companyin India (not only through the distributors ) and company must provide its trained technical person for each implantation when ever required and forfollow up programming when it is required Company must provide at least one programmer exclusively to the cardiology dept. Company must quote only the latest model of devices commercially available\"
815US FDA/CE APPROVED, PACING LEADS FOR AICD DUALCHAMBER Must have all specifications shown in related group of pacemaker Direct presence of Parent Companyin India (not only through the distributors ) and company must provide its trained technical person for each implantation when ever required and forfollow up programming when it is required Company must provide at least one programmer exclusively to the cardiology dept. Company must quote only the latest model of devices commercially available
816DCGIAPPROVED, PACING LEADS FOR AICD DUALCHAMBER Must have all specifications shown in related group of pacemaker Direct presence of Parent Companyin India (not only through the distributors ) and company must provide its trained technical person for each implantation when ever required and forfollow up programming when it is required Company must provide at least one programmer exclusively to the cardiology dept. Company must quote only the latest model of devices commercially available\"
817US FDA/CE APPROVED, PACING LEAD (ATRIAL AND VENTRICULAR) FOR DDDR PERMANENT PACEMAKERAATRIAL LEADBVENTRICULAR LEAD Must have all specifications shown in related group of pacemaker Direct presence of Parent Companyin India (not only through the distributors ) and company must provide its trained technical person for each implantation when ever required and forfollow up programming when it is required Company must provide at least one programmer exclusively to the cardiology dept. Company must quote only the latest model of devices commercially available.Company must quote only the latest model of devices commercially available\"
818DCGIAPPROVED, PACING LEAD (ATRIAL AND VENTRICULAR) FOR DDDR PERMANENT PACEMAKERAATRIAL LEADBVENTRICULAR LEAD Must have all specifications shown in related group of pacemaker Direct presence of Parent Companyin India (not only through the distributors ) and company must provide its trained technical person for each implantation when ever required and forfollow up programming when it is required Company must provide at least one programmer exclusively to the cardiology dept. Company must quote only the latest model of devices commercially available
819US FDA/CE APPROVED, PACING LEAD (ATRIAL AND VENTRICULAR) FOR DDD PERMANENT PACEMAKERAAATRIAL LEADBVENTRICULAR LEAD Must have all specifications shown in related group of pacemaker Direct presence of Parent Companyin India (not only through the distributors ) and company must provide its trained technical person for each implantation when ever required and forfollow up programming when it is required Company must provide at least one programmer exclusively to the cardiology dept. Company must quote only the latest model of devices commercially available
820DCGIAPPROVED, PACING LEAD (ATRIAL AND VENTRICULAR) FOR DDD PERMANENT PACEMAKERAATRIAL LEADBVENTRICULAR LEAD Must have all specifications shown in related group of pacemaker Direct presence of Parent Companyin India (not only through the distributors ) and company must provide its trained technical person for each implantation when ever required and forfollow up programming when it is required Company must provide at least one programmer exclusively to the cardiology dept. Company must quote only the latest model of devices commercially available\"
821US FDA/CE APPROVED, PACING LEADS FOR VDD/VDDR PACEMAKERSMust have all specifications shown in related group of pacemaker Direct presence of Parent Companyin India (not only through the distributors ) and company must provide its trained technical person for each implantation when ever required and forfollow up programming when it is required Company must provide at least one programmer exclusively to the cardiology dept. Company must quote only the latest model of devices commercially available
822DCGIAPPROVED, PACING LEADS FOR VDD/VDDR PACEMAKERS Must have all specifications shown in related group of pacemaker Direct presence of Parent Companyin India (not only through the distributors ) and company must provide its trained technical person for each implantation when ever required and forfollow up programming when it is required Company must provide at least one programmer exclusively to the cardiology dept. Company must quote only the latest model of devices commercially available
823USFDA/CEAPPROVED, PACING LEADS FOR VVI/VVIR PACEMAKERS Must have all specifications shown in related group of pacemaker Direct presence of Parent Companyin India (not only through the distributors ) and company must provide its trained technical person for each implantation when ever required and forfollow up programming when it is required Company must provide at least one programmer exclusively to the cardiology dept. Company must quote only the latest model of devices commercially available.
824DCGIAPPROVED, PACING LEADS FOR VVI/VVIR PACEMAKERS Must have all specifications shown in related group of pacemaker Direct presence of Parent Companyin India (not only through the distributors ) and company must provide its trained technical person for each implantation when ever required and forfollow up programming when it is required Company must provide at least one programmer exclusively to the cardiology dept. Company must quote only the latest model of devices commercially available.
825Lead For DDDR Pacemaker – RA Lead -DCGI&US FDA/ CE Approved
826Lead For DDDR Pacemaker – RA Lead -DCGI&US FDA/ CE Approved
827Lead For DDDR Pacemaker – RV Lead -DCGI&US FDA/ CE Approved
828Lead For DDD Pacemaker – RA Lead - DCGI&US FDA/ CE Approved
829Lead For DDDR Pacemaker – RV Lead - DCGI&US FDA/ CE Approved
830Lead For VDD Pacemaker – DCGI APPROVED & US FDA/ CE Approved
831Lead For ICDPacemaker – DCGI & US FDA/ CE Approved
832Lead For ICDDual ChamberPacemaker - DCGI&US FDA/ CE Approved
833Lead For CRTPacemaker –RA Lead DCGI&US FDA/ CE Approved
834Lead For CRTPacemaker –RV Lead DCGI&US FDA/ CE Approved
835Lead For CRTPacemaker –LVLead DCGI&US FDA/ CE Approved
836Lead For CRTDPacemaker –RVLead DCGI&US FDA/ CE Approved
837Lead For CRTDPacemaker –RALead DCGI&US FDA/ CE Approved
838Lead For CRTDPacemaker –LVLead -DCGI&US FDA/ CE Approved
839Epicardial Pacing Lead – RV Lead
840Epicardial Pacing Lead – RA Lead
841Latex Surgical Gloves (Powdered) – Thickness -0.135 mm• Natural Rubber Latex , Beaded cuff, Protein Content Level: <200μg/dm2 (as per ASTM D 5712)• Size – 6. 6.5, 7, 7.5, 8
842Latex Surgical Gloves (Powder Free) – Thickness -0.135 mm• Natural Rubber Latex , Beaded cuff, Protein Content Level: <50μg/dm2 (as per ASTM D 5712)• Size – 6. 6.5, 7, 7.5, 8
843SILICON COATED DIRECTLY JOINTED SUS & SITINOL SHAFT WIRE 0.7 GM, DUO CORE TECHNOLOGY – CE APPROVED
844SILICON COATED DIRECTLY JOINTED SUS & SITINOL SHAFT WIRE – 0.7 GM - DUO CORE TECHNOLOGY DCGI APPROVED
845SILICON COATED DIRECTLY JOINTED SUS & SITINOL SHAFT INTERMEDIATE WIRE 1 GM,DUO CORE TECHNOLOGY – CE APPROVED
846SILICON COATED DIRECTLY JOINTED SUS & SITINOL SHAFT INTERMEDIATE WIRE – 1 GM -DUO CORE TECHNOLOGY DCGI APPROVED
847STAINLESS STEEL GRINDED, CORE WIRE,ONE CORE CONSTRUCTION,PLATINUM TIP (3 CM)- 195 CM,STANDARD / 1.2 GF, INTERMEDIATE / 1.0 GF, FLOPPY / 0.8 GF, EXTRA FLOPPY / 0.6 GF – CE APPROVED
848STAINLESS STEEL GRINDED, CORE WIRE,ONE CORE CONSTRUCTION,PLATINUM TIP (3 CM)- 195 CM,STANDARD / 1.2 GF, INTERMEDIATE / 1.0 GFFLOPPY / 0.8 GF, EXTRA FLOPPY / 0.6 GF – DCGI APPROVED
849NITINOL DISTAL CORE WIRE -UNICORE- BOTH NITINOL - LE AND MULTIPLE STAINLESS-STEEL CONJUGATION - ULTRA-LOW (<0.7 G) – 3-6 GM CTO WIRE - CE APPROVED
850NITINOL DISTAL CORE WIRE – UNICORE -BOTH NITINOL - LE AND MULTIPLE STAINLESS-STEEL CONJUGATION - ULTRA-LOW (<0.7 G) – 3-6 GM CTO WIRE - DCGI APPROVED
851CONTROLLED VASCULAR LUMEN EXPANSION REGULATOR SYSTEM – CE APPROVED
852CONTROLLED VASCULAR LUMEN EXPANSION REGULATOR SYSTEM – DCGI APPROVED
853Post Vascular Intervention Coronary CVI-Balloon Catheters - Semi Crystalline Polymer Pressure Limit – 14-20
854Pre Vascular Intervention Coronary CVI-Balloon Catheters - Semi Crystalline Co-Polymer EFT Shaft Pressure Limit – 7-14
855Vascular Intervention Coronary CVI Drug-Coated Balloon -Lux coating technologyblends paclitaxel with BTHC
856Group – B (Interventional Neurology)
857DISPOSABLE LUER LOCK SYRINGE• SHOULD BE COMPITABLE WITH CUANOACRYLATE.• SHOULD BE AVAILABLE IN 1 C.C/2C.C/3C.C/5C.C/10 C.C/20 C.C/ 50C.C
858PICARD CATHETER• In various standard lengths and curves• 035-038 compatible100 cm long
859AMPLATZ CATHETER :• In various standard lengths and curves• 035-038 compatible100 cm long
860CAROTID ANGIOPALSTY BALLOON CATHETER(Over The Wire/Rapid Exchange)• Should have hydrophilic coating• Should be available in various outer diameters and balloon lengths and various shaft lengths
861CAROTID SELF EXPENDABLE STENTS• Should be 0.018” compatible• Should be over the wire and rapid exchange (OTW/RX)• Should be available in various diameters and length• Should be on a shaft length of 80-140 or above length
862POLY VINYL ALCOHOL (PVA) PARTICLES FOR PRE-OPERATIVE TUMOUR EMBOLIZATION
863ETHYL VINYL ALCOHOL EMBOLIC AGENT (WITH DMSO) FOR AVMs/AVFs/DAVFs/TUMOR-EMBOLIZATION
864SUPER SELECTIVE HIGH FLOW INFUSION CATHETERS - FOR CEREBRAL/ SPINAL AVMS (COMPITABLE WITH DMSO)Outer Diameter 2.7/1.5F, distal ID- 0.013”, Usable length at least 165 cm,
865SUPER SELECTIVE HIGH FLOW INFUSION CATHETERS - FOR CEREBRAL/ SPINAL AVMS (COMPITABLE WITH PARTICULATE EMBOLIC AGENTS SUCH AS PVA PARTICLES)
866DISTAL ACESS CATHETER FOR CO-AXIAL SYSTEMS• In various standerd length • Size5fr 6fr 7fr• 0.035 to 0.070, 0.074 inner lumen
867BALOON TOPPED GUIDING CATHETER• Size 6fr 7fr 8fr 9fr 10rf
868SPECIAL MICRO GUIDWIRE WITH TORQUE DEVICE FOR USE WITH MICRO CATHETERS• Size 0.007” – 0.014”
869SPECIAL MICRO GUIDWIRE (EXCHANGE LENGTH 260-300CM)WITH TORQUE DEVICE FOR USE WITH MICRO CATHETERSSize 0.010” – 0.014”
870ELECTROLYTE DETACHABLE 3-D TYPE / HALICAL / 360 COILS FOR INTRACRANIAL ANEURYSM TREATMENT – BARE PLATINUM COILS
871ELECTROLYTE DETACHABLE 3-D TYPE / HALICAL / 360 COILS FOR INTRACRANIAL ANEURYSM TREATMENT – COATED / BIO ACTIVE PLATINUM COILS
872SELECTIVE INFUSION MICROCATHETER FOR INTRECRANIAL ANEURYSM TREATMENT WITH 2 TIP MARKERS• Outer Diameter 2.1/1.7F and ID. 0.017”
873SELECTIVE INFUSION MICROCATHETER FOR DEPLOYNIG INTRACRANIAL DEVICE SHOULD BE COMPITABLE FOR STENTS FLOW DIVERTERS OR STENT RETRIVERS OF VARIOUS SIZES
874POWER SUPPLY ACESSIRIES AND CONNECTING CABLES FOR DETACHABLE COILS
875OPEN CELL DESIGN INTRACRANIAL STENTS FOR STENT ASSISTED COILLING OF ANEURYSN• Should have open cell design• should be available in various size and diameter
876FLOW DIVERTER FOR INTRACRANIAL ANEURISM TREATMENT
877SINGLE LUMEN BALOON ANGIOPLASTY CATHETER FOR INTRECRANIAL USE
878HYBRID CELL DESIGN INTRACRANIAL STENTS FOR STEN ASSISTED COILLENG OF ANEURUSM • Should have open cell design• should be available in various size and diameter
879REVASCULIZATION DEVICE FOR MECHENICAL THROMBECTOMY
880THROMBUS SUCTION CATHETERS FOR CLOT RETRIVALS FROM CAROTID AND VERTIBTALS
881INFUSION CATHETER FOR MOTERISED FRAGMENTATION AND SUCTION FOR CLOT RETRIVAL WITH SEPERATER
882STENT RETRIVAL FOR THROMBECTOMY
883WEB DEVICE INTRASPECULAR – AVAILABLE ASSORTED SIZE
884PRESSURE SALINE BAG 1000ML
885PRESSURE INFUSION REUSABLE BAG 1000ML

AI Tender Summary

OUR REF NO 50103507
AUTHORITY Government Departments
TENDER VALUE 39 Crore
LAST DATE 14-08-2025
Authority
Authority Name Government Medical College
Work Description Tender For Cardiology And Nephrology Consumable Item , Drug Eluting Stents, Pacemakers, Ptmc Balloon And Other Consumable Items , Group – A (Interventional Cardiology) , Radial Introducer Needle18g, 70Mm Length & 20G, 40Mm – Usfda/Ce/Dcgi Approved ?Tip- Sharp Half-Moon Bevel Shape Diamond Cutting. 18 G 7 Cm 20G 4 Cm. , Iv Canula - 20G, /21G 3.2 Cm And 4 Cm – Usfda/Ce/Dcgi Approved ?Ultrasharp Electropolished Pointed Tip. Thin-Walled Construction, Radiopaque In Nature Cannula Made Up Of Clear Polyurethane. Hub Shape Round Mini Wings/No Wings With Flash Plug. 20G,21G 3.2 Cm And 4 Cm , Trans Radial Introducer Kit With Puncture Needle - 4F-7F – 7/10/15/25 Cm, Usfda/Pmda Approved ?Sizes - 4 – 7 French, Length – 7/10/15/25 Cm ?Pack Must Include 20 G/45Mm Entry Needle, 0.025-Inch X 45/80 Cm Hydrophilic Mini Guidewire. ?Must Have Etfe Sheath Tubing, Dilator Tube Should Be Made Up Of Polypropylene And Should Have Silicon Coating. ?Should Contain Haemostatic Crosscut Valve To Prevent Back Leak Of Blood And Aspiration Of Air; With Integrated Side Arm With Attached 3-Way Stopcock. ?With Suture Eye For Securing Sheath, Kink Resistant, With Snap-On Dilator-Hub Lock Mechanism To Prevent Its Back-Out. , Trans Radial Introducer Kit With Puncture Needle - 4F-7F – 7/10/15/25 Cm, Ce/Dcgi Approved ?Sizes - 4 – 7 French, Length – 7/10/15/25 Cm ?Pack Must Include 20 G/45Mm Entry Needle, 0.025-Inch X 45/80 Cm Hydrophilic Mini Guidewire ?Must Have Etfe Sheath Tubing, Dilator Tube Should Be Made Up Of Polypropylene And Should Have Silicon Coating. ?Should Contain Haemostatic Crosscut Valve To Prevent Back Leak Of Blood And Aspiration Of Air; With Integrated Side Arm With Attached 3-Way Stopcock. ?With Suture Eye For Securing Sheath, Kink Resistant, With Snap-On Dilator-Hub Lock Mechanism To Prevent Its Back-Out. , Radial Introducer Kit - Hydrophilic Cto Approachable Slender Profile 4F-7F, 6.5F -Length - 7 Cm, 11Cm, 15Cm, 25Cm – Ce Approved ?Sizes - 4 – 7 French. Must Include 6.5F Special Sheath, Length - 7 Cm, 11Cm, 15Cm, 25Cm. ?Pack Must Include 22G/45Mm Plastic Entry Needle, 0.025-Inch X 45/80 Cm Hydrophilic Mini Guidewire. ?Must Have Metal Mesh Braided Structure ?Must Have 3 Layer Sandwich Of Ptfe Sheath Tubing With Pebax Inner Layer And Ss Braid, Dilator Tube Should Be Made Up Of Polypropylene And Should Have Silicon Coating. ?Should Contain Haemostatic Crossover Valve To Prevent Back Leak Of Blood And Aspiration Of Air; With Integrated Side Arm With Attached 3-Way Stopcock. ?With Suture Eye For Securing Sheath, Kink Resistant, With Rotation-Hub Lock Mechanism To Prevent Its Back-Out During Insertion , Slender Profile Hydrophilic Sheath 5-7 F (10, 16, Cm) - Usfda/Pmda Approved ?Must Have Unique Thin Wall Technology Reducing The Outer Diameter By 1 Fr Size Whilst Maintaining The One Size Lager Inner Diameter. 5Fr In 4, 6Fr In 5, 7Fr In 6 Profile. ? Must Have 7Fr Sheath With Outer Diameter Of 2.8Mm, 6Fr With Od Of 2.46 Mm & 5Fr With Od Of 2.13Mm. ?Hydrophilic M Coating With 20/21G Surflash Needle And Tif Tip Technology Which Provide Optimal Tapering Design. , Femoral Introducer Kit 4-11F (10, 16 & 25 Cm) - Usfda/Pmda Approved • Sizes - 4 – 11 French, Length – 10, 16 & 25 Cm • Pack Must Include 18 G/20G, Surflash Entry Needle, 0.035- Or 0.025-Inch X 45 Cm Mini Plastic Guidewire • Must Have Etfe Sheath Tubing, Dilator Tube Should Be Made Up Of Polypropylene And Should Have Silicon Coating. • Should Contain Haemostatic Crosscut Valve To Prevent Back Leak Of Blood And Aspiration Of Air; With Integrated Side Arm With Attached 3-Way Stopcock. • With Suture Eye For Securing Sheath, Kink Resistant, With Snap-On Dilator-Hub Lock Mechanism To Prevent Its Back-Out During Insertion , Femoral Introducer Kit 4-11F (10, 16 & 25 Cm) – Ce/Dcgi Approved ?Sizes - 4 – 11 French, Length – 10, 16 & 25 Cm ?Pack Must Include 18 G/20G, Surflash Entry Needle, 0.035- Or 0.025-Inch X 45 Cm Mini Plastic Guidewire ?Must Have Etfe Sheath Tubing, Dilator Tube Should Be Made Up Of Polypropylene And Should Have Silicon Coating. ?Should Contain Haemostatic Crosscut Valve To Prevent Back Leak Of Blood And Aspiration Of Air; With Integrated Side Arm With Attached 3-Way Stopcock. ?With Suture Eye For Securing Sheath, Kink Resistant, With Snap-On Dilator-Hub Lock Mechanism To Prevent Its Back-Out During Insertion , Femoral Introducer Kit - Hydrophilic Cto Approachable Slender Profile 4F-18F, Length - 11Cm, 15Cm, 25Cm – Ce Approved ?Sizes - 4 – 18 French. Length - 11Cm, 15Cm, 25Cm ?Pack Must Include 18G/70 Mm Plastic Entry Needle, 0.038-Inch X 45/80 Cm & .035 For 4F Hydrophilic Mini Guidewire. ?Must Have Metal Mesh Braided Structure ?Must Have 3 Layer Sandwich Of Ptfe Sheath Tubing With Pebax Inner Layer And Ss Braid, Dilator Tube Should Be Made Up Of Polypropylene And Should Have Silicon Coating. ?Should Contain Haemostatic Crossover Valve To Prevent Back Leak Of Blood And Aspiration Of Air; With Integrated Side Arm With Attached 3-Way Stopcock. ?With Suture Eye For Securing Sheath, Kink Resistant, With Rotation-Hub Lock Mechanism To Prevent Its Back-Out During Insertion , Braided Long Sheath – 6-8F – 45Cm - Usfda/Pmda Approved ?Diameter 6,7,8F And Length 45Cm. Atraumatic Tip For Carotid & Distal Procedures ?Haemostatic Valves (Cross Cut Valve & Tbv- Detachable Valves For Thrombus Management) ?Gold Coil Marker - For Distal Visibility ?Ptfe Coating - Seamless Device Transition, Distal Hydrophilic Coated For Navigability ?Nylon Outer Layer With Reinforced Stainless-Steel Coil - Helps In Smooth & Anti-Kink Effect , Braided Long Sheath – 6-8F – 45Cm – Ce/Dcgi Approved ?Diameter 6,7,8F And Length 45Cm. Atraumatic Tip For Carotid & Distal Procedures ?Haemostatic Valves (Cross Cut Valve & Tbv- Detachable Valves For Thrombus Management) ?Gold Coil Marker - For Distal Visibility ?Ptfe Coating - Seamless Device Transition, Distal Hydrophilic Coated For Navigability ?Nylon Outer Layer With Reinforced Stainless-Steel Coil - Helps In Smooth & Anti-Kink Effect , Braided Long Sheath – 6-8F – 65Cm - Usfda/Pmda Approved ?Diameter 6,7,8F And Length 65Cm. Atraumatic Tip For Carotid & Distal Procedures ?Haemostatic Valves (Cross Cut Valve & Tbv- Detachable Valves For Thrombus Management) ?Gold Coil Marker - For Distal Visibility ?Ptfe Coating - Seamless Device Transition, Distal Hydrophilic Coated For Navigability ?Nylon Outer Layer With Reinforced Stainless-Steel Coil - Helps In Smooth & Anti-Kink Effect , Braided Long Sheath – 6-8F – 65Cm – Ce/Dcgi Approved ?Diameter 6,7,8F And Length 65Cm. Atraumatic Tip For Carotid & Distal Procedures • Haemostatic Valves (Cross Cut Valve & Tbv- Detachable Valves For Thrombus Management) • Gold Coil Marker - For Distal Visibility • Ptfe Coating - Seamless Device Transition, Distal Hydrophilic Coated For Navigability • Nylon Outer Layer With Reinforced Stainless-Steel Coil - Helps In Smooth & Anti-Kink Effect , Braided Long Sheath – 6-8F – 90Cm - Usfda/Pmda Approved ?Diameter 6,7,8F And Length 90Cm. Atraumatic Tip For Carotid & Distal Procedures ?Haemostatic Valves (Cross Cut Valve & Tbv- Detachable Valves For Thrombus Management) ?Gold Coil Marker - For Distal Visibility ?Ptfe Coating - Seamless Device Transition, Distal Hydrophilic Coated For Navigability ?Nylon Outer Layer With Reinforced Stainless-Steel Coil - Helps In Smooth & Anti-Kink Effect , Braided Long Sheath – 6-8F – 90Cm – Ce/Dcgi Approved ?Diameter 6,7,8F And Length 90Cm. Atraumatic Tip For Carotid & Distal Procedures ?Haemostatic Valves (Cross Cut Valve & Tbv- Detachable Valves For Thrombus Management) ?Gold Coil Marker - For Distal Visibility ?Ptfe Coating - Seamless Device Transition, Distal Hydrophilic Coated For Navigability ?Nylon Outer Layer With Reinforced Stainless-Steel Coil - Helps In Smooth & Anti-Kink Effect , Braided Long Sheath – 8-18F – All Length – Ce/Dcgi Approved ?Diameter 8-18F And All Length. Atraumatic Tip For Carotid & Distal Procedures ?Haemostatic Valves (Cross Cut Valve & Tbv- Detachable Valves For Thrombus Management) ?Gold Coil Marker - For Distal Visibility ?Ptfe Coating - Seamless Device Transition, Distal Hydrophilic Coated For Navigability ?Nylon Outer Layer With Reinforced Stainless-Steel Coil - Helps In Smooth & Anti-Kink Effect , Hydrophilic Guidewire (Length - 150) With Mcoat/Hydrocoat Technology – Pmda/Ce Approved ?Standard Tip & .035, .032, .038, .025. .018 Diameter & 150 Cm Length - Straight / Angled / 1.5Mm J Shape ?Tapered Tip, Single Nitinol Core Alloy, Tungsten-Infused Polyurethane Jacket ?Hydrophilic Polymer Coat. One Piece Construction & Radiopaque Polyurethane Jacket. , Hydrophilic Guidewire (Length - 150) With Mcoat/Hydrocoat Technology – Dcgi Approved ?Standard Tip & .035, .032, .038, .025. .018 Diameter & 120 Cm & 150 & 180 Cm Length - Straight / Angled / 1.5Mm J Shape, Straight A, S, R-1.5Mmj, R-3Mmj In Standard And Stiff Support Level ?Tapered Tip, Single Nitinol Core Alloy, Tungsten-Infused Polyurethane Jacket ?Hydrophilic Polymer Coat. One Piece Construction & Radiopaque Polyurethane Jacket. , Hydrophilic Guidewire (Length - 180) With Mcoat/Hydrocoat Technology – Pmda/Ce Approved ?Standard Tip & .035, .032, .038, .025. .018 Diameter & 180 Cm Length - Straight / Angled ?Tapered Tip, Single Nitinol Core Alloy, Tungsten-Infused Polyurethane Jacket ?Hydrophilic Polymer Coat. One Piece Construction & Radiopaque Polyurethane Jacket. , Hydrophilic Guidewire (Length - 260) With Mcoat/Hydrocoat Technology – Pmda/Ce Approved ?Standard Tip & .035, .032, .038, .025. .018 Diameter & 260 Cm Length - Straight / Angled ?Tapered Tip, Single Nitinol Core Alloy, Tungsten-Infused Polyurethane Jacket ?Hydrophilic Polymer Coat. One Piece Construction & Radiopaque Polyurethane Jacket. , Hydrophilic Guidewire (220 & 260) With Mcoat/Hydrocoat Technology – Dcgi Approved • Standard Tip & .035, .032, .038, .025. .018 Diameter & 220 Cm & 260 Cm Length - Straight / Angled / 1.5Mm J Shape, Straight A, S, R-1.5Mmj, R-3Mmj In Standard And Stiff Support Level • Tapered Tip, Single Nitinol Core Alloy, Tungsten-Infused Polyurethane Jacket • Hydrophilic Polymer Coat. One Piece Construction & Radiopaque Polyurethane Jacket. , Extra Stiff - Hydrophilic Guidewire -150 Cm Usfda/Pmda Approved • 0.035, .032, .038, .025, .018 Diameter And 150 Cm Length - Straight / Angled -Half Stiff And Stiff, Extra Stiff • With Mcoat Technology Tapered Tip, Single Nitinol Core Alloy, Tungsten-Infused Polyurethane Jacket • Hydrophilic Polymer Coat. One Piece Construction & Radiopaque Polyurethane Jacket. , Extra Stiff - Hydrophilic Guidewire -260 Cm Usfda/Pmda Approved • 0.035, .032, .038, .025, .018 Diameter And 150 Cm Length - Straight / Angled -Half Stiff And Stiff, Extra Stiff • With Mcoat Technology Tapered Tip, Single Nitinol Core Alloy, Tungsten-Infused Polyurethane Jacket • Hydrophilic Polymer Coat. One Piece Construction & Radiopaque Polyurethane Jacket. , Ptfe Guidewire 150 Cm - Usfda/Pmda Approved ?150Cm, 175 Cm Of Lengths & 0.018 To 0.038 Diameter With Silicon Coated Tip. ?Silicon Coated Tip With Choice Of Stainless-Steel Core Or Nitinol Core, ?Should Be Available Fixed As Well As Movable Core. , Ptfe Guide Wire – 150 Cm – Ce/Dcgi Approved ?Should Be Available In 0.025, 0.032, 0.035 & 0.038 Inches, 150 Cm Long, Straight & J-Shaped Tip ?Should Be Available In Variable Lengths Of Flexible/Floppy End, Variable J Tip Sizes ?Should Be Available Fixed As Well As Movable Core. , Ptfe Guidewire – 260 Cm - Usfda/Pmda Approved ?260 Cm Of Lengths & 0.018 To 0.038 Diameter With Silicon Coated Tip. ?Silicon Coated Tip With Choice Of Stainless-Steel Core Or Nitinol Core, ?Should Be Available Fixed As Well As Movable Core. , Ptfe Guide Wire – 260 Cm – Ce/Dcgi Approved ?Should Be Available In 0.025, 0.032, 0.035 & 0.038 Inches, 150 Cm Long, Straight & J-Shaped Tip ?Should Be Available In Variable Lengths Of Flexible/Floppy End, Variable J Tip Sizes ?Should Be Available Fixed As Well As Movable Core. , Amplatz Super-Stiff Guide Wire - 260 – Usfda/Ce/Dcgi Approved ?Should Be Available In 0.035- And 0.038-Inches Size, 260/300 Cm Long, Straight Or J-Shaped Tip ?Should Be Available Fixed As Well As Movable Core. , Double Curve Extra Stiff Guide Wire – Landerquist Type – Regular Length , Double Curve Extra Stiff Guide Wire – Landerquist Type – 260Cm/300Cm , Pre-Shaped – Tavi Support Wire – Usfda Approved ?Outer Diameter: 0.035” (0.889 Mm), Length: 275 Cm ?Core Material: Stainless Steel With Lubrigree Ptfe Coating ?Unique Product Dimensions By Curve Size - Extra Small, Small, Large Curve , Radial Angiographic Catheter – Tig Curve (4-6F) - Usfda/Pmda -Approved ?Sizes - 4F, 5F, 6F, Shapes - Tig/3.5 Jacky/4-Sarah ?Two-Layer Construction, Double Braided Stainless-Steel Two-Ply Mesh Sandwiched Between Layers Of Polyurethane And Polyamide Elastomers. ?Must Have The Shaft Inner Layer And Outer Layer Contain Barium Sulphate With 32 Strands Of Stainless-Steel Braid ?Must Have Anti-Kinking Protector Sleeve, With Non-Braided Tip Shaft (Distal -2 Cm). ?Must Have Inner Diameter Of 4F = 1.03Mm, 5F= 1.20Mm, 6F = 1.30Mm , Radial Angiographic Catheter Hydrophilic – Tig Curve (4-6F) - Dcgi Approved ?Length - 80Cm / 100Cm / 110Cm / 130Cm, Sizes - 4F, 5F, 6F ?Must Have Triple-Layer Construction, Double Braided Stainless-Steel Two-Ply Mesh Sandwiched Between Layers Of Nylon And Pebax. ?Must Have Anti-Kinking Protector Sleeve, With Uncoated Non-Braided Tip Shaft (Distal -2 Cm) ?Must Have Inner Diameter Of 4F = 1.05Mm, 5F= 1.20Mm, 6F = 1.47Mm With 1000Psi Flow Rate. , Radial Angiographic Catheter Hydrophilic – Tig Curve (4-6F) - Dcgi Approved ?Length - 80Cm / 100Cm / 110Cm / 130Cm, Sizes - 4F, 5F, 6F ?Must Have Triple-Layer Construction, Double Braided Stainless-Steel Two-Ply Mesh Sandwiched Between Layers Of Nylon And Pebax. ?Must Have Anti-Kinking Protector Sleeve, With Uncoated Non-Braided Tip Shaft (Distal -2 Cm) ?Must Have Inner Diameter Of 4F = 1.05Mm, 5F= 1.20Mm, 6F = 1.47Mm With 1000Psi Flow Rate. , Femoral Diagnostic Catheter: 4 -6 Fr (Jl, Jr, Al, Ar, Pigtail) - Ce Approved ? Shapes - Jl, Jr, Al, Ar,Pigtail ? Triple-Layer Construction, Double Braided Stainless-Steel Two-Ply Mesh Sandwiched Between Layers Of Nylon And Pebax. ? Inner Diameter Of 4F = 1.04Mm, 5F= 1.20Mm, 6F = 1.47Mm With 1000Psi Flow Rate. ? Catheter Should Have Slender Profile Ultra-Thin Wall That Creates Large Lumen. ? Catheter Should Have Anti-Kinking Protector, With Uncoated Non-Braided Tip Shaft (Distal -2 Cm). , Femoral Diagnostic Catheter: 4 -6 Fr (Jl, Jr, Al, Ar, Im, Pigtail, Mp) - Usfda/Pmda -Approved ?Transfemoral Catheter Shapes Jl, Jr, Al, Ar, Im, Pigtail, Mp ?Braided Catheter With Stainless Steel Mesh Technology. ?Inner Diameter Of 4Fr =1.03Mm ,5Fr = 1.20Mm, 6Fr = 1.30Mm Or More Resulting In Higher Flow Rates. ?The Shaft Inner Layer And Outer Layer Should Contain Barium Sulphate With 32 Strands Of Stainless-Steel Braid ?Catheter Should Have Ultra-Thin Wall That Creates Large Lumen. ?Catheter Should Have Anti-Kinking Protector, With Non-Braided Tip Shaft (Distal -2 Cm). , Judkins Catheter (Jr & Jl) – 4 – 6 Fr ?Size - 4 French/5 French /6 French Size , Amplatz Catheter – Al & Ar – 4 6 Fr ?Size - 4 French/5 French /6 French , Multipurpose Catheter (Mp) 4-6 Fr ?Size - 4 French/5 French /6 French Size , Pigtail Catheter – 4 -6 Fr ?Size – 4 – 6 French , Angiographic Sizing Pigtail Catheter 5F/ 6F/ 7F – ?Size – 5 F – 7 F , Internal Mammary Catheter – 4 -6 Fr ?Size - 4 French/5 French /6 French In Various Standard Curves And Lengths. , By-Pass Graft Catheter ?Size - 4 French/5 French /6 French In Various Standard Curves And Lengths. , Nih Catheter - ?4 French/5 French /6 French/7 French/8French In Various Standard Curves And Lengths. , Cournard Catheter ?4 French/5 French /6 French/7 French/8French In Various Standard Curves And Lengths. , Diagnostic Catheters For Neonatal Use - 3- ‘French’ ?Pigtail, Judkins, Multipurpose, Cobra And Other Diagnostic Catheters Of 3 Fr. Size ?Varying Lengths And Shapes , Drug Delivery/Infusion Catheter , Coronary Probing Catheter , Coronary Perfusion Catheter , Coronary Trapeer Catheter , Swan Ganz Catheter - Us Fda Approved- 6F/7F , Swan Ganz Catheter – Ce/Dcgi Approved- 6F/7F , Special Swan Ganz Catheter ?Sizes - 4F, 5F, 6F And 7F And 8 Fr ?4 F Catheter Should Allow The Passage Of At Least 0.021, 5 F – 0.025, 6 F – 0.035 And 7 F, 8F – 0.038-Inch Hydrophilic Guide Wire Catheter Should Be Tapered At Tip To Ensure Uniform Diameter Of The Whole Catheter, 10 Cm Marking Along The Catheter Body. , Balloon Tipped Angiography Catheter , Berman Catheter ?Must Be Available In 4F, 5F, 6F And 7F Sizes ?Should Have 6-8 Holes Proximal To The Balloon For Dye Injection ?Catheter Should Be Tapered At Tip To Ensure Uniform Diameter Of The Whole Catheter, 10 Cm Marking Along Catheter , Reverse Berman Catheter ?Should Be Available In 4F, 5F, 6F & 7F Sizes ?Catheter Should Be Tapered At Tip To Ensure Uniform Diameter Of The Whole Catheter ?Should Have Holes Proximal To The Balloon For Dye Injection ?Should Have A Hole At The Proximal Tip To Allow The Passage Over The Wire , Pigtail Catheter (Pediatric) ?Sizes 3 French/ 4 French/ 5 French/ 6 French ?Smaller Length For Neonatal And Pediatric Use , Special Judkins Coronary Catheter With 2.5 Cm Curve (Pediatric) ?Sizes - 4 F/ 5 F/ 6 F , Angiographic Double Leumen Tracking Catheter – 4 F/5F/ 6F , Renal Double Curve Catheter ?In Various Standard Lengths And Curves , Head Hunter Catheter ?In Various Standard Lengths And Curves ?035-038 Compatible ?100 Cm Long , Simmons/ Sidewinder Catheter ?In Various Standard Lengths And Curves ?035-038 Compatible ?100 Cm Long , Preshaped Catheter For Uterine Artery Embolisation ?In Various Standard Lengths And Curves , Vertebral Catheter ?In Various Standard Lengths And Curves , Coeliac Axis Catheter ?In Various Standard Lengths And Curves , Shepherd’S Hook Catheter ?In Various Standard Lengths And Curves , Vtk Diagnostic Catheter ?In Various Standard Lengths And Curves 5F, 6F Size , 3D Space Rca Angiographic Catheter , Adjustable Hemostasis Valve For Catheters – Usfda Approved ?Should Meet Highest Medical Industrial Standards Click-On ?Quality Certification Should Be Provided From Authorized Agencies. , Adjustable Hemostasis Valve For Catheters - Ce Approved ?Should Meet Highest Medical Industrial Standards ?Quality Certification Should Be Provided From Authorized Agencies. , Adjustable Hemostasis Valve For Catheters - Dcgi Approved ?Should Meet Highest Medical Industrial Standards ?Quality Certification Should Be Provided From Authorized Agencies. , Hemostasis Valve - 8 Fr. Inner Lumen – Usfda Approved ?Star-Shaped Seal With Rotolock , Hemostasis Valve - 8 Fr. Inner Lumen – Ce Approved ? Star-Shaped Seal With Rotolock , Hemostasis Valve - 8 Fr. Inner Lumen – Dcgi Approved ? Star-Shaped Seal With Rotolock , Ptca Pressure Console – Usfda Approved , Ptca Pressure Console – Ce Approved , Ptca Pressure Console – Dcgi Approved , Angioplasty Pressure Diversion Module (Dual-Pathway) – Usfda Approved , Angioplasty Pressure Diversion Module (Dual-Pathway) -Ce Approved , Angioplasty Pressure Diversion Module (Dual-Pathway) -Dcgi Approved , Angioplasty Pressure Diversion Module (Tri-Pathway) – Usfda Approved , Angioplasty Pressure Diversion Module (Tri-Pathway) – Ce Approved , Angioplasty Pressure Diversion Module (Tri-Pathway) – Dcgi Approved , High – Presure Injector Lines - Dcgi Approved ? Should Be Available In Various Lengths ? Should Have Male And Female Luer Locks ? Should Be Transparent And Kink Resistant ? Should Be Able To Take High Pressure Of Angiographic Injections , Disposable Ecg Electrodes For Adults - Us Fda Approved ? Adult Diaphoretic Foam Electrodes. ? Should Be Pre-Gelled, Peel And Stick Electrode With Excellent Adhesion ? Should Have No Residue Once Removed ? Should Conform To Or Exceed The Highest Industrial Standard For Ecg Electrodes,Ation , Special Radiolucent Disposable Ecg Electodes For Adults – Dcgi Approved ? Radiolucent Electrodes For Electro-Physiologic Studies ? Wet Gel Electrodes, Should Be Porous And Breathable ? Should Conform To Or Exceed The Highest Industrial Standard For Ecg Electrodes, ? Quality Certification From Authorized Agencies To Be Provided , Syringe For Pressure Injector Installed In Cath Lab ? Should Be Compatible With Existing Machines At Cath Lab, Gmck , High-Pressure – Contrast Delivery Injector – With Luer Lock Mechanism- 10 Ml , High-Pressure – Contrast Delivery Injector – With Luer Lock Mechanism- 20 Ml , Arterial Pressure Monitor Lines (100, 150 & 200 Cm Long) ?Should Be Available In Sizes Of 100, 150 & 200 Cm Should Have Male Luer Lock Connection At One End And A Female Luer Lock Connection At The Other End , High-Fidelity Pressure Monitoring Extension Line – 200 ? Medical-Grade Pvc Or Dehp-Free Polyethylene, Male And Female Luer Lock Connectors, ? Must Be Dehp-Free (Diethylhexyl Phthalate-Free) And Latex-Free.Pressure Ratings – 1200 Psi , Disposable Transducers For Invasive Pressure Monitoring Compatible With Available System In Cath Lab In Gmck Hospital ?Disposable Transducers For Invasive Pressure Monitoring ?Should Be Compatible With Available System In Cath Lab (Iabp – Data Scope & Cath Lab Transducer) And Iccu At Gmck ?Should Meet Highest Medical Industrial Standards ?Quality Certification Should Be Provided Form Authorized Agencies , Domes For Transducer For Invasive Pressure Monitoring - Dcgi Approved ?Should Be Compatible With Existing Available System At Cath Lab And Ccu At Gmck ?Should Meet Or Exceed Highest Standards ?Quality Certification From Authorized Agencies To Be Provided , Ptca Inflation Device - Us Fda Approved ?Efficient Locking System To Maintain High Pressure ?Rapid Inflation And Deflation, Clear Barrel For Easy Visualization Of De-Bubbling ?Luminescent Analog Pressure Gauge (Up To 30 Atm), 20/30 Inflation Device Registers Pressures Up To 30 Atmospheresergometric And Use Friendly Hand Held Design. , Ptca Inflation Device - Ce Approved ?Efficient Locking System To Maintain High Pressure ?Rapid Inflation And Deflation, Clear Barrel For Easy Visualization Of De-Bubbling ?Luminescent Analog Pressure Gauge (Up To 30 Atm),20/30 Inflation Device Registers Pressures Up To 30 Atmospheres Ergometric And Use Friendly Hand Held Design. , Ptca Inflation Device - Dcgi Approved ?Efficient Locking System To Maintain High Pressure ?Rapid Inflation And Deflation, Clear Barrel For Easy Visualization Of De-Bubbling ?Luminescent Analog Pressure Gauge (Up To 30 Atm), 20/30 Inflation Device Registers Pressures Up To 30 Atmospheresergometric And Use Friendly Hand Held Design. , Y-Connector – Push Pull Mechanism - Us Fda/Pmda Approved ?9F Bore Size For Usage With A Variety Of Devices ?Should Accommodate Virtually All Interventional Devices ?Luer Connector At The Guiding Catheter End, Rotating Adapter At The Guiding Catheter End ?Should Have Bleed Back Safety Mechanism, Stepwise Control For Open, Semi-Open And Closed Position , Y-Connector– Push Pull Mechanism – Ce/Dcgi Approved ?9F Bore Size For Usage With A Variety Of Devices ?Should Accommodate Virtually All Interventional Devices ?Luer Connector At The Guiding Catheter End, Rotating Adapter At The Guiding Catheter End ?Should Have Bleed Back Safety Mechanism, Stepwise Control For Open, Semi-Open And Closed Position , Y-Connector – Push Click Mechanism –180 Psi Pressure Sustenace - Dcgi Approved ?9F Bore Size For Usage With A Variety Of Devices, With 180 Psi Of Pressure Sustenance. ?Should Accommodate Virtually All Interventional Devices ?Luer Connector At The Guiding Catheter End, Rotating Adapter At The Guiding Catheter End ?Should Have Bleed Back Safety Mechanism, Stepwise Control For Open, Semi-Open And Closed Position , Y-Connector – Push Click Mechanism - 300 Psi Pressure Sustenace –Dcgi Approved ?9F Bore Size For Usage With A Variety Of Devices, With 300 Psi Of Pressure Sustenance. ?Should Accommodate Virtually All Interventional Devices ?Luer Connector At The Guiding Catheter End, Rotating Adapter At The Guiding Catheter End ?Should Have Bleed Back Safety Mechanism, Stepwise Control For Open, Semi-Open And Closed Position , Y- Connector Kit – Push Pull Mechanism - Stepwise Control For Open, Semi-Open And Closed Position (Okay – 2 Type) - Us Fda / Ce Approved ?Should Accommodate Virtually All Interventional Devices ?Luer Connector At The Guiding Catheter End, Rotating Adapter At The Guiding Catheter End ?Should Have Bleed Back Safety Mechanism , W-Connector - Bifurcation Ptca – Usfda/Ce//Dcgi Approved ?Two Ports For Insertion Of Two Ptca Balloons Or One Balloon And One Other Part At The Same Time ?Luer Connector At The Guiding Catheter End, Rotating Adapter At The Guiding Catheter End , Manifold With Attached Tubings (Angio Kit) With 3 Port Left-Off /Right Off Orientation - Us Fda/Ce/Dcgi Approved ? Pressure Integrity - 250 Pascal Per Square Inches -500 Pascal Per Square Inches Rating And Wide Port Spacing. Clear Polycarbonate Body ? Integrated Pre-Flushed Transducer Port ? Minimum Flow Rate Of 85 Ml/Sec At 500 Psi. The Design Must Minimize Turbulence And Air Entrapment, Evidenced By An Airless Rotator Mechanism For Enhanced Patient Safety ? Three Side Port Manifold, One Connector Tubing For Connecting Manifold To Tuohy Borst ? One Luer Lock Control Syringe (10 Or 12 Ml) For Contrast Injection ? Two Large Bore Tubing (With Flow Regulating Knob) For Withdrawing Contrast & Saline One 3 Way Stop-Cock ? Color Coded Manifold With Left-Off /Right Off Orientation. , Manifold With Attached Tubings (Angio Kit) With 2 Port Left-Off /Right Off Orientation – Usfda/Ce/Dcgi Approved ? Pressure Integrity - 250 Pascal Per Square Inches -500 Pascal Per Square Inches Rating And Wide Port Spacing. Clear Polycarbonate Body ? Integrated Pre-Flushed Transducer Port ? Minimum Flow Rate Of 85 Ml/Sec At 500 Psi. The Design Must Minimize Turbulence And Air Entrapment, Evidenced By An Airless Rotator Mechanism For Enhanced Patient Safety ? Two Side Port Manifold, One Connector Tubing For Connecting Manifold To Tuohy Borst ? One Luer Lock Control Syringe (10 Or 12 Ml) For Contrast Injection ? Two Large Bore Tubing (With Flow Regulating Knob) For Withdrawing Contrast & Saline One 3 Way Stop-Cock ? Color Coded Manifold With Left-Off /Right Off Orientation. , Guiding Catheter With Special Extra Backup Curve Length (Abu 3.0, 3.25, 3.5, 3.75, 4.0) – Ce Approved ? Must Have (Abu 3.0, 3.25, 3.5, 3.75, 4.0) And Must Include 6.5 French Catheter ? Must Have Triple Layered Ss Braided Sandwich Structure With Outer Polymer Blend Layer & Inner Ptfe Layer ? Must Have Flat Wire Braided Structure, Should Have Uncoated And Non-Braided Atraumatic Soft Tip ? Must Have Various Tip Shapes And Curves – Extrabackup Left, Jl&Jr, Al&Ar, Mp ? Should Have Od Of 6F, 6.5F, 7F-8F. , Special 6.5 Introducer & 6.5F Guiding Catheter (Combo) – For Tri Procedures – Ce Approved ? Must Have Triple Layered Ss Braided Sandwich Structure With Outer Polymer Blend Layer & Inner Ptfe Layer ? Must Have Flat Wire Braided Structure ? Should Have Uncoated And Non-Braided Atraumatic Soft Tip ? Must Have Various Tip Shapes And Curves – Extrabackup Left, Jl&Jr, Al&Ar, Mp , Radial Guiding Catheter Both Curve -Us Fda Approved ? Should Be Braided With Low Friction Inner Layer ? Should Have Atraumatic Soft Tip ? Should Be Available In Various Tip Shapes And Curves For Access To Different Parts Of The Peripheral Vasculature, Including Renal Double Curve, Cobra, Multi – Purpose And Other Shapes ? Should Have Od Of 6F-8F Available ? Should Have The Largest Id For Each Od ? Should Have Lengths Ranging From 55-90 Cm , Radial Guiding Catheter Both Curve -Ce Approved ? Should Be Braided With Low Friction Inner Layer ? Should Have Atraumatic Soft Tip ? Should Be Available In Various Tip Shapes And Curves For Access To Different Parts Of The Peripheral Vasculature, Including Renal Double Curve, Cobra, Multi – Purpose And Other Shapes ? Should Have Od Of 6F-8F Available ? Should Have The Largest Id For Each Od ? Should Have Lengths Ranging From 55-90 Cm , Radial Guiding Catheter Both Curve -Dcgi Approved ? Should Be Braided With Low Friction Inner Layer ? Should Have Atraumatic Soft Tip ? Should Be Available In Various Tip Shapes And Curves For Access To Different Parts Of The Peripheral Vasculature, Including Renal Double Curve, Cobra, Multi – Purpose And Other Shapes ? Should Have Od Of 6F-8F Available ? Should Have The Largest Id For Each Od ? Should Have Lengths Ranging From 55-90 Cm , Transradial Guiding Catheter Right Curve/ Left Curve – Us Fda /Ce Approved ? Should Be Braided With Low Friction Inner Layer ? Should Have Atraumatic Soft Tip ? Should Be Available In Various Tip Shapes And Curves For Access To Different Parts Of The Peripheral Vasculature, Including Renal Double Curve, Cobra, Multi – Purpose And Other Shapes ? Should Have Od Of 6F-8F Available ? Should Have The Largest Id For Each Od ? Should Have Lengths Ranging From 55-90 Cm , Radial Guiding Catheter Ikari Curve -Dcgi Approved ?Should Be Braided With Low Friction Inner Layer ?Should Have Atraumatic Soft Tip ?Should Be Available In Various Tip Shapes And Curves For Access To Different Parts Of The Vasculature ?Should Have Od Of 6F-8F Available ?Should Have The Largest Id For Each Od ?Should Have Lengths Ranging From 90 Cm Or Above , Guiding Catheter For Peripheral Vascular Use – Us Fda Approved ?Should Be Available In Various Tip Shapes And Curves For Access To Different Parts Of The Coronary Vasculature, Including Judkins, Multi – Purpose And Other Shapes ?Should Have Od Of 5F-8F Available ?Should Have Lengths Ranging From 55-100 Cm , Guiding Catheter For Peripheral Vascular Use – Ce Approved ?Should Be Available In Various Tip Shapes And Curves For Access To Different Parts Of The Coronary Vasculature, Including Judkins, Multi – Purpose And Other Shapes ?Should Have Od Of 5F-8F Available ?Should Have Lengths Ranging From 55-100 Cm , Guiding Catheter For Peripheral Vascular Use – Dcgi Approved ?Should Be Available In Various Tip Shapes And Curves For Access To Different Parts Of The Coronary Vasculature, Including Judkins, Multi – Purpose And Other Shapes ?Should Have Od Of 5F-8F Available ?Should Have Lengths Ranging From 55-100 Cm , Guiding Catheter For Peripheral Vascular Use (5- 10F)– Dcgi Approved ?Should Be Available In Various Tip Shapes And Curves For Access To Different Parts Of The Coronary Vasculature, Including Judkins, Multi – Purpose And Other Shapes ?Should Have Od Of 5F-10F Available ?Should Have Lengths Ranging From 55-100 Cm , Long Sheath For Contra – Lateral Iliac/ Femoral Access – Us Fda Approved ?Should Be Low Friction With Inner Coating To Allow Catheter Manipulation ?Should Have Distal Radio-Opaque Tip For Enhanced Visibility On Fluoroscopy ?Should Have A Proximal Hemostasis Valve/ Provision For Tuohyborst Valve ?Shove Be Color Coded For Size Identification ?Should Be Available In 4F – 9 F Size With The Largest Id, Lengths Ranging From 40-110 Cm , Renal Guiding Catheter / Renal Guiding Catheter Double Curve/ Renal Guiding Catheter Single Curve – Us Fda /Ce Approved ?Should Be Braided With Low Friction Inner Layer Should Be Available In Various Tip Shapes And Curves For Access To Different Parts Of The Peripheral Vasculature, Including Renal Double Curve, Cobra, Multi – Purpose And Other Shapes ?Should Have Od Of 6F-8F Available, Should Have Lengths Ranging From 55-90 Cm , Renal Guiding Catheter / Renal Guiding Catheter Double Curve/ Renal Guiding Catheter Single Curve – Dcgi Approved ?Should Be Braided With Low Friction Inner Layer Should Be Available In Various Tip Shapes And Curves For Access To Different Parts Of The Peripheral Vasculature, Including Renal Double Curve, Cobra, Multi – Purpose And Other Shapes ?Should Have Od Of 6F-8F Available, Should Have Lengths Ranging From 55-90 Cm , Mother & Child Catheter – Us Fda/Ce Approved ?With Reliable Support With Large Inner Lumen And Inner Ptfe. , Mother & Child Catheter – Dcgiapproved ?With Reliable Support With Large Inner Lumen And Inner Ptfe. , Intubation Catheter For Assisting Delivery Of Stent In Difficult Anatomies – Us Fda/Ce Approved , Intubation Catheter For Assisting Delivery Of Stent In Difficult Anatomies – Dcgi Approved , Rdc Shape Guiding Catheter For Renal & C-Lilac Artery Angioplasty – - Us Fda/Ce / Dcgi Approved , Guide Extention Catheter: (Guide Plus Type) – Usfda/Pmda Approved Guide Extension Catheter Available In Variable Diameters Of 4.7F And 5.0F For Accessing Distal Anatomy And Delivering High Profile Devices; Guide Extension Catheter With A Tapered Distal Shaft For Accessing Distal And Challenging Coronary Anatomy; Guide Extension Catheter With A Resinous Atraumatic Tip; Guide Extension Catheter With A Large Entry Port Design For Easy Device Insertion , Guide Extention Catheter (Guidezilla Type) - Us Fda Approved ? 120 Proximal Hypo-Tube Shaft ? 0.57 Inner Diameter & 0.066” Outer Diameter ? Should Be With Proximal Marker And 1 X 1 Braiding , Guide Extention Catheter (Guidezilla Type) - Ce Approved ? 120 Proximal Hypo-Tube Shaft ? 0.57 Inner Diameter & 0.066” Outer Diameter ? Should Be With Proximal Marker And 1 X 1 Braiding , Guide Extention Catheter (Guidezilla Type) - Dcgi Approved ? 120 Proximal Hypo-Tube Shaft ? 0.57 Inner Diameter & 0.066” Outer Diameter Should Be With Proximal Marker And 1 X 1 Braiding , Manual Aspiration Catheter Aspiration Catheter Of 6F And 7F Guiding Catheter Compatibility; 140 Cm Working Length Catheter With 140 Cm Stylet Length; 90 Cm And 100 Cm Depth Markers; Provide 60Ml Aspiration Syringe For High Suction Efficiency; Large Size Collecting Filter. , Mechanical Aspiration Device – Usfda , Mechanical Aspiration Device – Ce/Dcgi , Thrombectomy Catheters With Distal Balloon Occlusion And Automated Suction During Ptca - Us Fda Approved , Thrombectomy Catheters With Distal Balloon Occlusion And Automated Suction During Ptca – Ce/Dcgi Approved , Thrombectomy Catheters With Motorized Cutting And Suction During Ptca - Us Fda Approved , Thrombectomy Catheters With Motorized Cutting And Suction During Ptca – Ce/Dcgi Approved , Aspiration Thrombectomy Catheter –1.30 Mm Square Suction Area - Usfda/Pmda Approved • Available In Size 6F, 7F Both, Must Have Entry Profile 0.019 Inches • Braided Polyamide Elastomer Shaft, Stainless Steel Wire Braiding And Guide Wire Type Stylet, • 6.0Mm Tip Length For Making Aspiration Inlet To Come Closer To The Target Thrombus And 10Cm-Length Depth. • Must Have Distal 40 Cm Hydrophilic Coating. , Aspiration Thrombectomy Catheter –1.30 Mm Square Suction Area – Ce Approved • Available In Size 6F, 7F Both, Must Have Entry Profile 0.019 Inches • Braided Polyamide Elastomer Shaft, Stainless Steel Wire Braiding And Guide Wire Type Stylet, • 6.0Mm Tip Length For Making Aspiration Inlet To Come Closer To The Target Thrombus And 10Cm-Length Depth. • Must Have Distal 40 Cm Hydrophilic Coating. , Aspiration Thrombectomy Catheter –1.30 Mm Square Suction Area – Dcgi Approved • Available In Size 6F, 7F Both, Must Have Entry Profile 0.019 Inches • Braided Polyamide Elastomer Shaft, Stainless Steel Wire Braiding And Guide Wire Type Stylet, • 6.0Mm Tip Length For Making Aspiration Inlet To Come Closer To The Target Thrombus And 10Cm-Length Depth. • Must Have Distal 40 Cm Hydrophilic Coating. , Computer Aided Vaccum Thrombectomy Catheter Kit Forvte Mechanical Aspiration With Working Length Of 100/115/130 Cm. ? Should Have Multi-Pitch, Laser-Cut Stainless Steel Hypotube For 1:1 Torque Transfer & Advance Deliverability. ? Catheter Should Have Id Of (3.33 Mm), Od Of 12 Fr With Htorq Tip With 50 Mm Circumferencial Sweep. ? Compatible With 12 Fr Sheath & Wire Platform (.014-.038) With Proprietoryseperator Technology. ? Aspiration Tubing Audio Visual Cues To Help Indicate Location Of Clot In System & Compatible With Engine With (-29.2) Inhg Deep Vacuum , Computer Aided Vaccum Thrombectomy Catheter Kit Forvte Mechanical Aspiration With Working Length Of 100 Cm With Flash Mode Designed For Expedited Venous Clot Removal. ? Should Have Multi-Pitch, Laser-Cut Stainless Steel Hypotube For 1:1 Torque Transfer & Advance Deliverability With Lightning Flash Tubing + Flash Catheter +Accessories + Select Catheter. ? Catheter Should Have Id Of 4.5 Mm, Od Of 16 Fr With Htorq Tip With 50 Mm Circumferencial Sweep. ? Compatible With 16 Fr Sheath & Wire Platform (.014-.038) With Proprietoryseperator Technology. ? Should Have Catheter Hub Port +Aspiration Tubing Port + Flow Cap + Flush Port As Rhv ? Packaged With 6F Select Catheter With Ber Or H1 Tip To Further Aid In Vessel Selection. ? Dual Clot Detection Algorithems With Max Id Technology. Aspiration Tubing Audio Visual Cues To Help Indicate Location Of Clot In System & Compatible With Engine With (-29.2) Inhg Deep Vacuum , Computer Aided Vaccum Thrombectomy Catheter Kit Forvte Mechanical Aspiration With Working Length Of 115 Cm With Flash Mode Designed For Expedited Venous Clot Removal. ? Should Have Multi-Pitch, Laser-Cut Stainless Steel Hypotube For 1:1 Torque Transfer & Advance Deliverability With Lightning Flash Tubing + Flash Catheter +Accessories + Select Catheter. ? Catheter Should Have Id Of (4.5 Mm), Od Of 16 Fr With Htorq Tip With 50 Mm Circumferencial Sweep. ? Compatible With 16 Fr Sheath & Wire Platform (.014-.038) With Proprietoryseperator Technology. ? Should Have Catheter Hub Port +Aspiration Tubing Port + Flow Cap + Flush Port As Rhv ? Packaged With 6F Select Catheter With Ber Or H1 Tip To Further Aid In Vessel Selection. ? Dual Clot Detection Algorithems With Max Id Technology. Aspiration Tubing Audio Visual Cues To Help Indicate Location Of Clot In System & Compatible With Engine With (-29.2) Inhg Deep Vaccum , Catheter- ? Stainless Steel Hypotube At The Proximal End,Designed To Enhance Deliverability To The Desired Vesselwith Optimal Visualization And Placement. ? Catheter Size : 6 F Catheter Type : Low Crossing Profile Of 1.75Mm With An Id Of .044”. ? Separator : Proprietary Separator Technology For Easy And Quick Aspiration, With 200 Cm Length And Distal Od Of .89 Mm. Safety Features : Ability To Get The Clot Out And Not Macerate . , Separator Componant: ? 150Cm - Proprietary Separator Technology For Easy And Quick Aspiration, With150 Cm Length And Distal Od Of 1.83 Mm. ? 175 Cm - Proprietary Separator Technology For Easy And Quick Aspiration, With175 Cm Length And Distal Od Of 1.40 Mm. , Aspiration Source - Engine Canister _ ? 1 Litre Capacity Collecting Jar With Measuring Marks. Integrated Clot Catcher With Completely Airtight And Break Resistant To – 2 Atm Pressure. Single Touch Operation. Led Canister Lighting. , Engine Powerful Aspiration Pump ? With 29-Inch Hg Deep Vacuum. Canister With Integrated Clot Catheter. Led Canister Should Be Sleek And Simple Design. , Coronary Micro-Guide Catheter With Gold Marker– Distal 70 Cm Hydrophilic Coat. Usfda/Pmda Approved • Must Have Tapered Stainless Steel Braid Mesh Construction And Inner Ptfe Layer. • Must Have 13 Cm Floppy Distal Segment, 70Cm Distal Hydrophilic Coating • Must Have Distal Outer Diameter 1.8 Fr Or Less And Proximal Outer Diameter 2.6Fr. • Catheter Length 130Cm For Antegrade Approach And 150 Cm For Retrograde Approach. , Coronary Micro-Guide Catheter With Gold Marker– Distal 70 Cm Hydrophilic Coat. Ce/Dcgi Approved • Must Have Tapered Stainless Steel Braid Mesh Construction And Inner Ptfe Layer. • Must Have 13 Cm Floppy Distal Segment, 70Cm Distal Hydrophilic Coating • Must Have Distal Outer Diameter 1.8 Fr Or Less And Proximal Outer Diameter 2.6Fr. • Catheter Length 130Cm For Antegrade Approach And 150 Cm For Retrograde Approach. , Re-Entry Catheter For Cto For Coronary – Us Fda/Ce / Dcgi Approved , Re-Entry Wire For Cto For Coronary – Us Fda/Ce / Dcgi Approved , Re-Entry Balloon With Two Exit Port For Cto For Coronary – Us Fda/Ce / Dcgi Approved , Microcatheter – Tip Entry – 1.3F - 135, 150 Cm - Usfda Approved • Tapered Soft Tip, Tip Entry 1.3 Fr Distal 2.6 Fr & Proximal 2.8 Fr Having Shinka Shaft Length 135 & 150 Cm • Usfda Approved , Microcatheter –Tip Entry – 1.3F -135, 150 Cm – Ce/Dcgi Approved • Tapered Soft Tip, Tip Entry 1.3 Fr Distal 2.6 Fr & Proximal 2.8 Fr Having Shinka Shaft Length 135 & 150 Cm • Usfda Approved , Microcatheter – Tip Entry – 1.4F -135, 150 Cm - Usfda Approved • Tapered Soft Tip, Tip Entry 1.4 Fr Distal 1.9 Fr & Proximal 2.6 Fr Having Shinka Shaft Length 135 & 150 Cm • Usfda Approved , Microcatheter – Tip Entry – 1.4F -135, 150 Cm – Ce/Dcgi Approved • Tapered Soft Tip, Tip Entry 1.4 Fr Distal 1.9 Fr & Proximal 2.6 Fr Having Shinka Shaft Length 135 & 150 Cm • Usfda Approved , Microcatheter - Double Lumen – Usfda Approved , Microcatheter - Double Lumen – Usfda Approved , Coaxial Microcatheter System For Peripheral Vessels – Usfda/Pmda Approved ? 2.8Fr And 2.4Fr - 2.4 And 2.0Fr Pre-Shaped Tip ? Tungsten Coil Pitch Construction, Ptfe Inner Layer, Dmso Compatible, Radiopaque 0.7 Mm Platinum/Iridium Markers , Coaxial Microcatheter System For Peripheral Vessels – Ce/Dcgi Approved ? 2.8Fr And 2.4Fr - 2.4 And 2.0Fr Pre-Shaped Tip Tungsten Coil Pitch Construction, Ptfe Inner Layer, Dmso Compatible, Radiopaque 0.7 Mm Platinum/Iridium Markers , Radial Artery Haemostasis Device- (Trans Radial Band) – Usfda/Pmda Approved ?Sizes – 24Cm And 29Cm, Must Have Belt Magic Tape For Fast Application. ?Consists Of Two Balloon Specially Designed For Spot Compression Of The Radial Puncture Site. ?Must Have Curved Support Plate. Must Have Green Positioning Marker , Radial Artery Haemostasis Device- (Trans Radial Band) – Ce/Dcgi Approved ?Sizes – 24Cm And 29Cm, Must Have Belt Magic Tape For Fast Application. ?Consists Of Two Balloon Specially Designed For Spot Compression Of The Radial Puncture Site. Must Have Curved Support Plate. Must Have Green Positioning Marker , Femoral Compression Devices – Disc / Dome Based Compression- Us Fda Approved , Femoral Compression Devices – Disc / Dome Based Compression – Ce/Dcgi Approved , Icd/Pi Compression Devices , Ptca/Coronary Angiography Drap Set ?Contains Absorbable Disposable Woven Cloth Sheet Of Size 1.5 Meter Z 2.5 Meter (2No) ?Contains Absorbable Disposable Woven Cloth Sheet Of Size 1.5 Meter X 1Metr (2No) , G- Kit Type Disposable Surgeons Gown Set , Disposable Plastic Sheet Of Size 1.5X2.5 Mtr , Angiography Cine Recordable Disk- Compact R Type Media With Cover With Govt. Medical College Kota & M.C Logo Printed Over The Cover , Angiography Cinerecordable -Digital Versetile – Rtype Media With Cover With Govt. Medical College Kota & M.C Logo Printed Over The Cover , G-Kit Type Disposable Sterile Surgeon Gowns , Disposable E.O. Sterile Angiography Drap Set Kit (Radial), ?Should Have Two Long Disposable Sheet In Both Sizes ?( 1.50 Meter X 1.0 Meter With Hole Of 3 Inch Radius -1 Quantity) ?( 1.50 Meter X 2.5 Meter With Hole Of 3 Inch Radius – 2 In Quantity) , Disposable E.O Sterile Angiography Drap Set Kit (Femoral), ?Should Have Two Long Disposable Sheet In Both Sizes ?( 1.50 Meter X 1.0 Meter With Hole Of 3 Inch Radius -1 Quantity), ?( 1.50 Meter X 2.5 Meter With Hole Of 3 Inch Radius – 2 In Quantity) , Long Disposable E.O Sterile Sheet(1.50 Meter X 2.5 Meter Size) , Small Disposable E.O Sterile Sheet(1.50 Meter X 1.0 Meter Size) , Rat Pad Type Radiation Protection Device Shield In All Sizes , Disposable Radiation Protection Shields & Drapes ? Disposable Non Fenestrated Lead Free Absorbable Sterile Barrier Pad For Protection During Fluoroscopy For Coronary Interventional Procedures With A Minimum Thickness Of 0.25 Mm Lead Equivalence, With Patented Bi-Layer Homogenous Sheet Tested & Certified To Iec 61-1:2014, Astm F3094-14, Din 6857-1, Usfda Approved, Iso 13485 & Barc Certified With Attenuation Greater Than 92% At 90Kvp. Dimensions: 12” X 17” , Disposable Radiation Protection Shields & Drapes ? Disposable Scoop Fenestrated Lead Free Absorbable Sterile Barrier Pad For Protection During Fluoroscopy For Coronary Interventional Procedures With A Minimum Thickness Of 0.25 Mm Lead Equivalence, With Patented Bi-Layer Homogenous Sheet Tested & Certified To Iec 61-1:2014, Astm F3094-14, Din 6857-1, Usfda Approved, Iso 13485 & Barc Certified With Attenuation Greater Than 92% At 90Kvp. Dimensions: 12” X 17”, Fenestration: 3.5” X 1.5” , Disposable Radiation Protection Shields & Drapes ? Disposable Circular Fenestrated Lead Free Absorbable Sterile Barrier Pad For Protection During Fluoroscopy For Coronary Interventional Procedures With A Minimum Thickness Of 0.25 Mm Lead Equivalence, With Patented Bi-Layer Homogenous Sheet Tested & Certified To Iec 61-1:2014, Astm F3094-14, Din 6857-1, Usfda Approved, Iso 13485 & Barc Certified With Attenuation Greater Than 92% At 90Kvp. Dimensions: 12” X 17”, Fenestration: Circle Fenestration: 1.5” , Disposable Radiation Protection Shields & Drapes ? Disposable Non Fenestrated Lead Free Absorbable Sterile Barrier Pad For Protection During Fluoroscopy For Peripheral Interventional Procedures With A Minimum Thickness Of 0.25 Mm Lead Equivalence, With A Minimum Length Of 34 Inches And Covering The Length From Hip To Toe; With Patented Bi-Layer Homogenous Sheet Tested & Certified To Iec 61-1:2014, Astm F3094-14, Din 6857-1, Usfda Approved, Iso 13485 & Barc Certified With Attenuation Greater Than 92% At 90Kvp. Dimensions: 12” X 34” , Disposable Radiation Protection Caps Disposable Non Fenestrated Lead-Free Absorbable Head Cap For Protection During Fluoroscopy For Interventional Procedures With A Minimum Thickness Of 0.25 Mm Lead Equivalence And Usfda Approved , External Temporary Pacemaker , Ptca Guide Wire – 2 Mm Silicon Coated Distal Tip, 0.014” Diameter And 180 Cm Length – Usfda/Pmda Approved • Must Have Platinum Coil At Distal Tip. Balance Of Hydrophilic And Hydrophobic Coating • Must Have Directly Jointed Sus And Nitinol Shaft Through Duocore Technology And Silicon Coated Joint. • Must Have Ptfe Coating From 25 To 180 Cm Length. & Mucus Coat Hydrophilic Coating Up To 248 Mm • Should Have 0.6 & 1.0 Gram Force Tip Loads , Ptca Guide Wire – 2 Mm Silicon Coated Distal Tip, 0.014” Diameter And 180 Cm Length – Ce/Dcgi Approved • Must Have Platinum Coil At Distal Tip. Balance Of Hydrophilic And Hydrophobic Coating • Must Have Directly Jointed Sus And Nitinol Shaft Through Duocore Technology And Silicon Coated Joint. • Must Have Ptfe Coating From 25 To 180 Cm Length. & Mucus Coat Hydrophilic Coating Up To 248 Mm • Should Have 0.6 & 1.0 Gram Force Tip Loads , Cto Stiff Ptca Wire - 3.6-Gram Force Tip Load – 2 Mm Silicon Coated Distal Tip, 0.014” Diameter And 180 Cm – Usfda/Pmda Approved •Must Have Platinum Coil At Distal Tip. Balance Of Hydrophilic And Hydrophobic Coating •Must Have Directly Jointed Sus And Nitinol Shaft Through Duocore Technology And Silicon Coated Joint. •Must Have M Coat Hydrophilic Coating Up To 248 Mm & Ptfe Coating From 25 To 180 Cm Length. ? Should Have 3.6-Gram Fore Tip Load , Cto Stiff Ptca Wire - 3.6-Gram Force Tip Load – 2 Mm Silicon Coated Distal Tip, 0.014” Diameter And 180 Cm – Ce/Dcgi Approved •Must Have Platinum Coil At Distal Tip. Balance Of Hydrophilic And Hydrophobic Coating •Must Have Directly Jointed Sus And Nitinol Shaft Through Duocore Technology And Silicon Coated Joint. •Must Have M Coat Hydrophilic Coating Up To 248 Mm & Ptfe Coating From 25 To 180 Cm Length. •Should Have 3.6-Gram Fore Tip Load , Ptca Guidewire For Septal Navigation - 0.03 Gm Tip Load– Usfda Approved •Tip Load 0.3 Gm, Hydrophilic Coating With Sion Tec Technology, Coil Length 19 Cm, Length 190 Cm & 300 Cm , Ptca Guidewire For Septal Navigation - 0.03 Gm Tip Load – Ce/Dcgi Approved •Tip Load 0.3 Gm, Hydrophilic Coating With Sion Tec Technology, Coil Length 19 Cm, Length 190 Cm & 300 Cm , Ptca Guidewire For Cto – 3 Gm Tip Load - 8.5 Cm Spring Coil - Usfda Approved •Stainless Core, Actone Technology, Polymer Jacket With Hydrophilic Coating, Tip Load 3 Gm, Radiopaque Length 3 Cm, Spring Coil 8.5 Cm, Length 190 Cm & 300 Cm , Ptca Guidewire For Cto – 3 Gm Tip Load - 8.5 Cm Spring Coil - Ce/Dcgi Approved •Stainless Core, Actone Technology, Polymer Jacket With Hydrophilic Coating, Tip Load 3 Gm, Radiopaque Length 3 Cm, Spring Coil 8.5 Cm, Length 190 Cm & 300 Cm , Ptca Guidewire For Cto – 3 Gm Tip Load – 3 Cm Spring Coil – Usfda Approved •Stainless Core, Actone Technology, Polymer Jacket With Hydrophilic Coating, Tip Load 3 Gm, Radiopaque Length 3 Cm, Spring Coil 3 Cm, Length 190 Cm & 300 Cm , Ptca Guidewire For Cto – 3 Gm Tip Load – 3 Cm Spring Coil – Ce/Dcgi Approved •Stainless Core, Actone Technology, Polymer Jacket With Hydrophilic Coating, Tip Load 3 Gm, Radiopaque Length 3 Cm, Spring Coil 3 Cm, Length 190 Cm & 300 Cm , Ptca Guidewire For Cto – 3 Gm Tip Load – 11 Cm Spring Coil – Usfda Approved •Stainless Core, Actone Technology, Polymer Jacket Length 40 Cm With Hydrophilic Coating 50 Cm, Tip Load 3 Gm, Radiopaque Length 3 Cm, Spring Coil 11 Cm, Length 200 Cm & 300 Cm With Straight Tip & 1 Mm Pre Shape , Ptca Guidewire For Cto – 3 Gm Tip Load – 11 Cm Spring Coil – Ce/Dcgi Approved •Stainless Core, Actone Technology, Polymer Jacket Length 40 Cm With Hydrophilic Coating 50 Cm, Tip Load 3 Gm, Radiopaque Length 3 Cm, Spring Coil 11 Cm, Length 200 Cm & 300 Cm With Straight Tip & 1 Mm Pre Shape , Ptca Guidewire For Cto – 0.6 Gm Tip Load – 28 Cm Spring Coil – Usfda Approved Sion Tecc Technology, Actone Braiding, 17 Cm Polymer Jacket 17 Cm Slip Coat Coating, Radiopaque Length 16 Cm 28 Cm Spring Coil, Tapered Tip 0.010-Inch, Tip Load 0.6 Gm , Ptca Guidewire For Cto – 0.6 Gm Tip Load – 28 Cm Spring Coil – Ce/Dcgi Approved Sion Tecc Technology, Actone Braiding, 17 Cm Polymer Jacket 17 Cm Slip Coat Coating, Radiopaque Length 16 Cm 28 Cm Spring Coil, Tapered Tip 0.010-Inch, Tip Load 0.6 Gm , Ptca Guidewire For Cto – 1.0 Gm Tip Load – 28 Cm Spring Coil – Usfda Approved Sion Tecc Technology, Actone Braiding, 17 Cm Polymer Jacket 17 Cm Slip Coat Coating, Radiopaque Length 16 Cm 28 Cm Spring Coil, Tapered Tip 0.010-Inch, Tip Load 1.0 Gm , Ptca Guidewire For Cto – 1.0 Gm Tip Load – 28 Cm Spring Coil – Ce/Dcgi Approved Sion Tecc Technology, Actone Braiding, 17 Cm Polymer Jacket 17 Cm Slip Coat Coating, Radiopaque Length 16 Cm 28 Cm Spring Coil, Tapered Tip 0.010-Inch, Tip Load 1.0 Gm , Ptca Guidewire For Cto – 1.7, 3.5, 4.5 Gm Tip Load – 15 Cm Spring Coil – Usfda Approved ? Sion Tecc Technology, Actone Braiding, Spring Coil Length 15 Cm, Radiopaque Length 15 Cm, Tapered Tip 0.010 Inch ? Gaia 1St Tip Load 1.7 Gm Tapered Tip 0.011 Inch ? Gaia 2Nd Tip Load 3.5 Gm, Tapered Tip 0.012 Inch ? Gaia 3Rd Tip Load 4.5 Gm, •All Are Mini - Pre Shaped 1Mm 45 Degree Angle , Micro Cone Tip Used For Cto Cases , Ptca Guidewire For Cto – 1.7, 3.5, 4.5 Gm Tip Load – 15 Cm Spring Coil – Ce/Dcgi Approved ? Sion Tecc Technology, Actone Braiding, Spring Coil Length 15 Cm, Radiopaque Length 15 Cm, Tapered Tip 0.010 Inch ? Gaia 1St Tip Load 1.7 Gm Tapered Tip 0.011 Inch ? Gaia 2Nd Tip Load 3.5 Gm, Tapered Tip 0.012 Inch ? Gaia 3Rd Tip Load 4.5 Gm, ? All Are Mini - Pre Shaped 1Mm 45 Degree Angle , Micro Cone Tip Used For Cto Cases , Ptca Guidewire For Cto – 3.0 Gm Tip Load ? Single Core , Core To Tip , Tip Load 3 Gm , Tip Radiopacity 3 Cm , Tip Diameter 0.014 Inch , Tip Radiopacity 11 Cm , Slip Coat Over The Spring Coil Used For Cto Lesion , Ptca Guidewire For Cto – 3.0, 6.0, 12 Gm Tip Load ? Single Core , Core To Tip , Tip Load 3 Gm ,6 Gm , 12 Gm Tip Radiopacity 3 Cm , Tip Diameter 0.014 Inch , Tip Radiopacity 11 Cm , Silicone Coating Coat Over The Spring Coil Used For Cto Lesion , Ptca Guidewire For Cto – 9.0, 12, 20 Gm Tip Load ? Single Core Core To Tip , Tip Load 9 Gm Tapered 0.090 , 12 Gm Tapered 0.090 Inch & 20 Gm Tapered Tip 0.080 Inch For Cto Lesion , Ptca Guidewire For Cto – 3.0 Gm Tip Load Single Core Core To Tip , Tip Load 3 Gm, Radiopacity 3 Cm , Guide Wire Length 330 Cm , Slip Coat Over The Spring Coil , Ptca Guidewire For Cto – 2.0, 4.0, 6.0 Gm Tip Load ? Sion Tecc Technology, Actone Braiding, Spring Coil Length 15 Cm , Radiopaque Length 15 Cm , Tapered Tip 0.010 Inch ? Gaia 1St Tip Load 2 Gm Tapered Tip 0.011 Inch ? Gaia 2Nd Tip Load 4 Gm, Tapered Tip 0.012 Inch ? Gaia 3Rd Tip Load 6 Gm, ? All Are Mini - Pre Shaped 1Mm 45 Degree Angle , Micro Cone Tip , Xtrand Coil , Ptca Wires With Facility Of Boot Links For Extension Of Regular Wire - Us Fda Approved , Micro-Wire (0.008”-0.012” ) With Hydrophilic Coating , Special Inflation Device For High Pressure (55 Atm), High Resolution , Ptca Wire – Tip Load - 0.5-0.7Gm – Usfda Approved ? Regular Workhorse Guidewire With Tapered Elastinite Nitinol Core, Durasteel Ribbon Tip And Available In Both Hydrophilic And Hydrophobic Coatings Between Tip Load 0.5-0.7Gm , Ptca Wire – Tip Load - 0.5-0.7Gm –With Intermediate Polymer Sleeve - Usfda Approved ? Regular Workhorse Guidewire With Elastinite Nitinol Core, Hyten Stainless Steel Tip, Intermediate Polymer Sleeve With Hydrocoat On Distal Tip Between Tip Load 0.5-0.7Gm , Ptca Wire – Tip Load - 0.5-0.7Gm –With Intermediate Polymer Sleeve - Ce/Dcgi Approved ? Regular Workhorse Guidewire With Elastinite Nitinol Core, Hyten Stainless Steel Tip, Intermediate Polymer Sleeve With Hydrocoat On Distal Tip Between Tip Load 0.5-0.7Gm , Ptca Wire – Tip Load - 0.5-0.7Gm –With Hyten Stainless Steel Tip - Usfda Approved ? Regular Workhorse Guidewire With Elastinite Nitinol Core, Hyten Stainless Steel Tip Intermediate Polymer Sleeve With Smoothglide Coating On Proximal And Turbocoat On Distal Tip Between Tip Load 0.5-0.7Gm , Ptca Wire – Tip Load - 0.5-0.7Gm –With Hyten Stainless Steel Tip - Ce/Dcgi Approved ? Regular Workhorse Guidewire With Elastinite Nitinol Core, Hyten Stainless Steel Tip Intermediate Polymer Sleeve With Smoothglide Coating On Proximal And Turbocoat On Distal Tip Between Tip Load 0.5-0.7Gm , Ptca Wire – Tip Load – 0.6 Gm –With Stainless Steel Core With Shaping Ribbon Tip - Usfda Approved ? Regular Workhorse Guidewire With Tapered Stainless Steel Core And Shaping Ribbon Tip Available In Tip Load Of 0.6Gm With Poly Tetra Fluoro Ethylene Coating On Proximal End , Ptca Wire – Tip Load – 0.6 Gm –With Stainless Steel Core With Shaping Ribbon Tip – Ce/Dcgi Approved ? Regular Workhorse Guidewire With Tapered Stainless Steel Core And Shaping Ribbon Tip Available In Tip Load Of 0.6Gm With Poly Tetra Fluoro Ethylene Coating On Proximal End , Ptca Wire – Tip Load – 0.8 Gm – Responsease Core Grind With Palladium-Rhenium Tip – Usfda Approved ? Regular Workhorse Guidewire With Responsease Core Grind Technology And 3Cm Palladium-Rhenium Radiopaque Distal Tip Available In Tip Load Of 0.8Gm With 190 And 300Cm , Ptca Wire – Tip Load – 0.8 Gm – Responsease Core Grind With Palladium-Rhenium Tip – Ce/Dcgi Approved ? Regular Workhorse Guidewire With Responsease Core Grind Technology And 3Cm Palladium-Rhenium Radiopaque Distal Tip Available In Tip Load Of 0.8Gm With 190 And 300Cm , Ptca Wire – Tip Load – 0.9 Gm – Responsease Core Grind With Uncoated Tip – Usfda Approved ? Workhorse Guidewire With Durasteel Core, Responsease Core Grind Technology And 1.5 Cm Uncoated Distal Tip For Tactile Feedback Available In Multiple Variants With Exact Same Tip Load Of 0.9Gm , Ptca Wire – Tip Load – 0.9 Gm – Responsease Core Grind With Uncoated Tip – Ce/Dcgi Approved ? Workhorse Guidewire With Durasteel Core, Responsease Core Grind Technology And 1.5 Cm Uncoated Distal Tip For Tactile Feedback Available In Multiple Variants With Exact Same Tip Load Of 0.9Gm , Ptca Wire – Tip Load – 0.6-.8 Gm – Triple Spring With Rotary Swagging Tip – Usfda Approved ? Workhorse Guidewire With Triple Spring 304V Stainless Steel With Niti Distal Core And Cold Working Rotary Swagging Tip Available In Tip Loads Between 0.6-0.8Gm And Lengths (190/300Cm). , Ptca Wire – Tip Load – 0.6-.8 Gm – Triple Spring With Rotary Swagging Tip – Ce/Dcgi Approved ? Workhorse Guidewire With Triple Spring 304V Stainless Steel With Niti Distal Core And Cold Working Rotary Swagging Tip Available In Tip Loads Between 0.6-0.8Gm And Lengths (190/300Cm). , Speciality Ptca Wire – Low Support - Tip Load 0.8-1.0 Gm – Usfda Approved ? Low Support Durasteel Guidewire With Full Polymer Coating Available In Tip Loads Between 0.8-1.0Gm , Speciality Ptca Wire – Low Support - Tip Load 0.8-1.0 Gm – Ce/Dcgi Approved ? Low Support Durasteel Guidewire With Full Polymer Coating Available In Tip Loads Between 0.8-1.0Gm , Speciality Ptca Wire – Medium Support - Tip Load 1.0-1.2 Gm – Usfda Approved ? Medium Support Durasteel Guidewire With Full Polymer Coating Available In Tiploads Between 1.0-1.2Gm , Speciality Ptca Wire – Medium Support - Tip Load 1.0-1.2 Gm – Ce/Dcgi Approved ? Medium Support Durasteel Guidewire With Full Polymer Coating Available In Tiploads Between 1.0-1.2Gm , Speciality Ptca Wire – Extra Support - Tip Load 1.0-1.2 Gm – Usfda Approved ? Extra Support Durasteel Guidewire With Full Polymer Coating Available In Tiploads Between 1.0-1.2Gm , Speciality Ptca Wire – Extra Support - Tip Load 1.0-1.2 Gm – Ce/Dcgi Approved ? Extra Support Durasteel Guidewire With Full Polymer Coating Available In Tiploads Between 1.0-1.2Gm , Speciality Ptca Wire – Extra Support - Tip Load 1.3-1.5 Gm – Usfda Approved ? Extra Support Durasteel Guidewire With Full Polymer Cover, Marker At 4.5Cm From Distal Tip And Tipload Between 1.3-1.5Gm , Speciality Ptca Wire – Extra Support - Tip Load 1.3-1.5 Gm – Ce/Dcgi Approved ? Extra Support Durasteel Guidewire With Full Polymer Cover, Marker At 4.5Cm From Distal Tip And Tipload Between 1.3-1.5Gm , Speciality Ptca Wire – Stainless Steel - Tip Load 1.0 Gm – Usfda Approved ? Stainless Steel Guidewire With Stainless Steel Coils And Hydrophilic Coating Availabe In Tipload Of 1Gm With Radioapaque Tip Of 3Cm , Speciality Ptca Wire – Stainless Steel - Tip Load 1.0 Gm – Ce/Dcgi Approved ? Stainless Steel Guidewire With Stainless Steel Coils And Hydrophilic Coating Availabe In Tipload Of 1Gm With Radioapaque Tip Of 3Cm , Speciality Ptca Wire – Stainless Steel - Tip Load 0.6 - 0.7 Gm – Usfda Approved ? Stainless Steel Guidewire With Intermediate Polymer Sleeve And Hydrophobic Coating Availabe In Tipload Between 0.6-0.7Gm With Radioapaque Tip Of 3Cm , Speciality Ptca Wire – Stainless Steel - Tip Load 0.6 - 0.7 Gm – Ce/Dcgi Approved ? Stainless Steel Guidewire With Intermediate Polymer Sleeve And Hydrophobic Coating Availabe In Tipload Between 0.6-0.7Gm With Radioapaque Tip Of 3Cm , Speciality Ptca Wire – Elastinite Nitinol - Tip Load 0.7 - 0.8 Gm – Usfda Approved ? Elastinite Nitinol Guidewire With Shaping Ribbon Tip And Hydrophilic Coating Avaialble In Tipload Between 0.7-0.8Gm With Radiopaque Tip Of 4.5Cm , Speciality Ptca Wire – Elastinite Nitinol - Tip Load 0.7 - 0.8 Gm – Ce/Dcgi Approved ? Elastinite Nitinol Guidewire With Shaping Ribbon Tip And Hydrophilic Coating Avaialble In Tipload Between 0.7-0.8Gm With Radiopaque Tip Of 4.5Cm , Speciality Ptca Wire – Stainless Steel - Tip Load 1.7, 4.7, 6.2, 8.7 Gm – Usfda Approved ? Stainless Steel Penetration Guidewire With Core-To-Tip Design And Hydrophilic Coating Available In Tipload Of 1.7, 4.7, 6.2, 8.7 Gm , Speciality Ptca Wire – Stainless Steel - Tip Load 1.7, 4.7, 6.2, 8.7 Gm – Ce/Dcgi Approved ? Stainless Steel Penetration Guidewire With Core-To-Tip Design And Hydrophilic Coating Available In Tipload Of 1.7, 4.7, 6.2, 8.7 Gm , Speciality Ptca Wire – Durasteel - Tip Load 2.5-2.7 Gm – Usfda Approved ? Extra Support Durasteel Cto Guidewire With Full Polymer Cover, Gold Marker At 4.5Cm From Distal Tip And Tipload Between 2.5-2.7Gm , Speciality Ptca Wire – Durasteel - Tip Load 2.5-2.7 Gm – Ce/Dcgi Approved ? Extra Support Durasteel Cto Guidewire With Full Polymer Cover, Gold Marker At 4.5Cm From Distal Tip And Tipload Between 2.5-2.7Gm , Ptca Wire For Cto Tip Load –4.5-4.8 – Usfda Approved ? Cto Guidewire Having Durasteel Core, Intermediate Polymer Sleeve Available In Tipload Between 4.5-4.8Gm Tipload And Penetration Power Of 40 Kgpsin , Ptca Wire For Cto Tip Load –9.5-9.7– Usfda Approved ? Ptca Cto Guidewire Having Durasteel Core, Intermediate Polymer Sleeve Available In Tipload Between 9.5-9.7Gm Tipload And Penetration Power Of 80 Kgpsin , Ptca Wire For Cto Tip Load –13.5-13.9 – Usfda Approved ? Ptca Cto Guidewire Having Durasteel Core, Intermediate Polymer Sleeve Available In Tipload Between 13.5-13.9Gm Tipload And Penetration Power Of 120 Kgpsin , Ptca Wire For Cto Tip Load –12-12.5 – Usfda Approved Cto Guidewire Having Durasteel Core, Intermediate Polymer Sleeve Available In Tipload Between 12.0-12.5Gm Tipload And Penetration Power Of 140 Kgpsin , Ptca Wire For Cto Tip Load –12.8-13.0 – Usfda Approved Cto Guidewire Having Durasteel Core, Intermediate Polymer Sleeve Available In Tipload Between 12.8-13.0Gm Tipload And Penetration Power Of 200 Kgpsin , Ptca Wire For Cto – Tip Load – 11, 14 Gm - Usfda Approved Cto Guidewire Having Having Durasteel Core, Hydrophilic Coating (Excluding The Tip) For Lubricity And Ease Of Movement Within A Microcathete, Textured Tip With Tip Size Of 0.009 Inches And Tip Angle Of 25 Degrees At 1 Mm Of Tip. Should Have The Tip Load Of 11, 14Gm , High Pressure Non-Compliant Balloon – Three Pleats Re-Wrappable Structure - Pmda Approved •With Innovative Triple Layer Balloon Technology With High Pressure Resistance Of 22 Atm. •Must Have Elastomer Outer Layer, Middle Layer Of Polyamide And Inner Most Layer Of Elastomer. •Must Have Nominal Pressure Of 12Atm And Rbp Of 22Atm. •Shorter Thin Distal Tip Of 2.9Mm With Low Entry Profile Of 0.43 Mm. Must Have Hydrophilic Mucus Coating •Must Have 3.0 Mm Short Taper Balloon Shoulder & Must Have 0.8Mm Shorter And 25?M Thinner Radiopaque Marker For Lower Crossing Profile. •Must Have 2.6 French Stainless Steel Core Wire Structured Shaft & Stainless-Steel Stylet In Mid Shaft. Must Have Hypotube Without Ptfe Coating. , High Pressure Non-Compliant Balloon – Three Pleats Re-Wrappable Structure – Ce/Dcgiapproved ? With Innovative Triple Layer Balloon Technology With High Pressure Resistance Of 22 Atm. ? Must Have Elastomer Outer Layer, Middle Layer Of Polyamide And Inner Most Layer Of Elastomer. ? Must Have Nominal Pressure Of 12Atm And Rbp Of 22Atm. ? Shorter Thin Distal Tip Of 2.9Mm With Low Entry Profile Of 0.43 Mm. Must Have Hydrophilic Mucus Coating ? Must Have 3.0 Mm Short Taper Balloon Shoulder & Must Have 0.8Mm Shorter And 25?M Thinner Radiopaque Marker For Lower Crossing Profile. ? Must Have 2.6 French Stainless Steel Core Wire Structured Shaft & Stainless-Steel Stylet In Mid Shaft. Must Have Hypotube Without Ptfe Coating. , Cto Balloon With Ultra – Ultra Low Entry Profile Of 0.016 Must Have Hydrophilic Mucus Coating -Pmda Approved ? Should Have Smallest Diameter 1.00Mm And 5Mm Length. - Three Pleats Re-Wrappable Structure. ? Must Have 0.8Mm Shorter And 25?M Thinner Radiopaque Marker For Lower Crossing Profile. ? Must Have Flexible Tip With Short Balloon Bonding Part Of 0.4Mm. ? Nominal Pressure Of 06 Atm And Rbp Of 14 Atm ? Must Have 2.4 To 2.7 French Tapered Stainless Steel Core Wire Structured Shaft , Cto Balloon With Ultra – Ultra Low Entry Profile Of 0.016 Must Have Hydrophilic Mucus Coating -Ce/Dcgi Approved ? Should Have Smallest Diameter 1.00Mm And 5Mm Length. - Three Pleats Re-Wrappable Structure. ? Must Have 0.8Mm Shorter And 25?M Thinner Radiopaque Marker For Lower Crossing Profile. ? Must Have Flexible Tip With Short Balloon Bonding Part Of 0.4Mm. ? Nominal Pressure Of 06 Atm And Rbp Of 14 Atm ? Must Have 2.4 To 2.7 French Tapered Stainless Steel Core Wire Structured Shaft , Ptca Balloon Semi Compliant For Cto – Usfda Approved ? Cto Indicated Slim Seal Technology On Distal Tip With Lesion Entry Profile Of 0.016, Crossing Profile Of 0.021 And Single Flexible Tungsten Marker Available In Unique Diameter Of 1.2Mm With Variety Of Lengths ? Diameter – 1.2, 1.5. 2.0 ? Length – 6, 8, 12, 15, 20 & In 2Mm-25, 30 , Ptca Balloon Semi Compliant For Cto – Ce/Dcgi Approved ? Cto Indicated Slim Seal Technology On Distal Tip With Lesion Entry Profile Of 0.016, Crossing Profile Of 0.021 And Single Flexible Tungsten Marker Available In Unique Diameter Of 1.2Mm With Variety Of Lengths ? Diameter – 1.2, 1.5. 2.0 ? Length – 6, 8, 12, 15, 20 & In 2Mm-25, 30 , Ptca Balloon Semi Compliant – Usfda Approved ? With Slim Seal Technology On Distal Tip With Crossing Profile Of 0.021”, Lesion Entry Profile Of 0.017” And Microglide Coating Available In Diameter 2.25-5.00Mm And Lengths 6-30Mm ? Diameter – 2.25, 2.5, 2.75, 3.0, 3.25, 3.5, 3.75, 4.0, 4.5, 5.0 Mm ? Length - 6, 8, 12, 15, 20, 25, 30 , Ptca Balloon Semi Compliant – Ce/Dcgi Approved ? With Slim Seal Technology On Distal Tip With Crossing Profile Of 0.021”, Lesion Entry Profile Of 0.017” And Microglide Coating Available In Diameter 2.25-5.00Mm And Lengths 6-30Mm ? Diameter – 2.25, 2.5, 2.75, 3.0, 3.25, 3.5, 3.75, 4.0, 4.5, 5.0 Mm ? Length - 6, 8, 12, 15, 20, 25, 30 , Ptca Balloon Non-Compliant – Usfda Approved ? With Multilayer Crossflex Balloon Technology And Round Tip With Lesion Entry Profile Of 0.018” Available In Diameter 1.5Mm-5Mm And Lengths In 6Mm-25Mm With Skive Technology On Mid Shaft Of Dilatation Catheter ? Diameter – 1.5, 2.0, 2.25, 2.5, 2.75, 3.0, 3.25, 3.5, 3.75, 4.0, 4.5, 5.0 Mm ? Length- 6, 8, 12, 15, 20, 25 , Ptca Balloon Non-Compliant – Ce/Dcgi Approved ? With Multilayer Crossflex Balloon Technology And Round Tip With Lesion Entry Profile Of 0.018” Available In Diameter 1.5Mm-5Mm And Lengths In 6Mm-25Mm With Skive Technology On Mid Shaft Of Dilatation Catheter ? Diameter – 1.5, 2.0, 2.25, 2.5, 2.75, 3.0, 3.25, 3.5, 3.75, 4.0, 4.5, 5.0 Mm ? Length- 6, 8, 12, 15, 20, 25 , Ptca Balloon Non-Compliant – Usfda Approved ? Multilayer And Single Piece Outer Member And Large Hypotube And Visible Hub Printing Should Have Shorter Deflation Time And Shall Come In Sizes Of 1.5 Mm To 6 Mm ? Diameter – 1.5, 2.0, 2.25, 2.5, 2.75, 3.0, 3.25, 3.5, 3.75, 4.0, 4.5, 5.0, 5.5, 6.0 Mm ? Length- 6, 8, 12, 15, 20, 25 , Ptca Balloon Non-Compliant – Ce/Dcgi Approved ? Multilayer And Single Piece Outer Member And Large Hypotube And Visible Hub Printing Should Have Shorter Deflation Time And Shall Come In Sizes Of 1.5 Mm To 6 Mm ? Diameter – 1.5, 2.0, 2.25, 2.5, 2.75, 3.0, 3.25, 3.5, 3.75, 4.0, 4.5, 5.0, 5.5, 6.0 Mm ? Length- 6, 8, 12, 15, 20, 25 , Ptca Balloon Semi-Compliant – Ce Approved ? Balloon With Laser Bond Technology On Distal Tip With Crossing Profile Of 0.021” And Tip Entry Profile Of 0.017” Available In Diameter 2.25-5.00Mm And Lengths 6-30Mm ? Diameter –2.25, 2.5, 2.75, 3.0, 3.25, 3.5, 3.75, 4.0, 4.5, 5.0 Mm ? Length- 6, 8, 12, 15, 20, 25, 30 , Ptca Balloon Semi-Compliant –Dcgi Approved ? Balloon With Laser Bond Technology On Distal Tip With Crossing Profile Of 0.021” And Tip Entry Profile Of 0.017” Available In Diameter 2.25-5.00Mm And Lengths 6-30Mm ? Diameter –2.25, 2.5, 2.75, 3.0, 3.25, 3.5, 3.75, 4.0, 4.5, 5.0 Mm ? Length - 6, 8, 12, 15, 20, 25, 30 , Ptca Balloon Non-Compliant – Ce Approved ? Non-Complaint Coronary Balloon With Tri-Fold Layers And Tip Entry Profile Of 0.018” Available In Diameter 2.0-4.5Mm And Lengths In 8Mm-25Mm ? Diameter –2.0, 2.25, 2.5, 2.75, 3.0, 3.25, 3.5, 3.75, 4.0, 4.5 Mm ? Length - 8, 12, 15, 20, 25 Mm , Ptca Balloon Non-Compliant – Dcgi Approved ? Non-Complaint Coronary Balloon With Tri-Fold Layers And Tip Entry Profile Of 0.018” Available In Diameter 2.0-4.5Mm And Lengths In 8Mm-25Mm ? Diameter –2.0, 2.25, 2.5, 2.75, 3.0, 3.25, 3.5, 3.75, 4.0, 4.5 Mm ? Length - 8, 12, 15, 20, 25 Mm , Slender Profile Tapered Tip Cto Balloon Semi Compliant – With Unique Diameter 1Mm & 6Mm Length – Ce Approved ? Tapered Fit Tungsten Tip With Lesion Entry Profile Of 0.0158, With Tip Entry Id - .0145”Crossing Profile Of 0.021 ? Must Have Special Trifold Rewrap Design, With Selective Hydrophilic Coating Over Balloon ? Must Have Flexible Platinum Iridium Marker With Tungsten Tip ? Diameter – 1, 1.25, 1.5, 2.0, 2.25, 2.5, 2.75, 3.0, 3.25, 3.5, 3.75, 4.0, 4.5, 5.0 Mm, ? Length – 6, 9, 12, 15, 20, 30 Mm ? Must Have Nominal Pressure 8 Atm, Rbp -12 Atm , Tapered Tip Non-Compliant Ptca Balloon With Selective Hydrophilic Coating – Ce Approved ? Must Have Tapered Tungsten Tip With Tungsten Lesion Entry Profile Of 0.0158, With Tip Entry Id - .0145” Crossing Profile Of 0.021, Must Have Gradient Stiff Shaft ? Must Have Flexible Platinum Iridium Marker With Tungsten Tip ? Must Have Special Trifold Rewrap Design, With Selective Hydrophilic Coating Over Balloon ? Diameter –2.0, 2.25, 2.5, 2.75, 3.0, 3.25, 3.5, 3.75, 4.0, 4.5, 5.0 Mm, ? Length – 6, 8, 12, 15, 20, 30 Mm ? Must Have Nominal Pressure 12 Atm, Rbp -20 Atm , Spherical Tip Non-Compliant Lolipop Ptca Balloon With Selective Hydrophilic Coating – Ce Approved ? Must Have Spherical Tungsten Tip With Tungsten Lesion Entry Profile Of 0.0158, With Tip Entry Id - .0145”Crossing Profile Of 0.021, Must Have Gradient Stiff Shaft ? Must Have Flexible Platinum Iridium Marker With Tungsten Tip ? Must Have Special Trifold Rewrap Design, With Selective Hydrophilic Coating Over Balloon ? Diameter –2.0, 2.25, 2.5, 2.75, 3.0, 3.25, 3.5, 3.75, 4.0, 4.5, 5.0 Mm, ? Length – 6, 8, 12, 15, 20, 30 Mm ? Must Have Nominal Pressure 12 Atm, Rbp -20 Atm , Non-Compliant Ptca Balloon – Usfda Approved ? 0.017” Lesion Entry Profile, Crossing Profile - .031, Bi-Segmen Inner Shaft Design With Hydrophilic Coating, Over-The-Inner Tip Design, Slop Outer Shaft ? Platinum Iridium Marker Bands, Nominal Pressure 12 Atm, Rbp -18 Atm ? Diameter –2.0, 2.25, 2.5, 2.75, 3.0, 3.25, 3.5, 3.75, 4.0, 4.5, 5.0, 5.5, 6.0 Mm, ? Length – 6, 8, 12, 15, 20, 30 Mm , Non-Compliant Ptca Balloon – Ce/Dcgi Approved ? 0.017” Lesion Entry Profile, Crossing Profile - .031, Bi-Segmen Inner Shaft Design With Hydrophilic Coating, Over-The-Inner Tip Design, Slop Outer Shaft ? Platinum Iridium Marker Bands, Nominal Pressure 12 Atm, Rbp -18 Atm ? Diameter –2.0, 2.25, 2.5, 2.75, 3.0, 3.25, 3.5, 3.75, 4.0, 4.5, 5.0, 5.5, 6.0 Mm, ? Length – 6, 8, 12, 15, 20, 30 Mm , Semi-Compliant Ptca Balloon – Usfda Approved ? 0.017” Lesion Entry Profile, Crossing Profile - .026, Bi-Segmen Inner Shaft Design With Hydrophilic Coating, Unique, Over-The- Inner Tip Design: Outer Tip Material Rides Over The Inner Shaft Material, Slop Outer Shaft, Optileap Material Withzglide Hydrophilic Coating ? Platinum Iridium Marker Bands, Nominal Pressure 12 Atm, Rbp -18 Atm ? Diameter –1.2, 1.5, 2.0, 2.25, 2.5, 2.75, 3.0, 3.25, 3.5, 3.75, 4.0, 4.5, 5.0 Mm, ? Length – 8, 12, 15, 20, 30, 40 Mm , Semi-Compliant Ptca Balloon – Ce/Dcgi Approved ? 0.017” Lesion Entry Profile, Crossing Profile - .026, Bi-Segmen Inner Shaft Design With Hydrophilic Coating, Unique, Over-The- Inner Tip Design: Outer Tip Material Rides Over The Inner Shaft Material, Slop Outer Shaft, Optileap Material Withzglide Hydrophilic Coating ? Platinum Iridium Marker Bands, Nominal Pressure 12 Atm, Rbp -18 Atm ? Diameter –1.2, 1.5, 2.0, 2.25, 2.5, 2.75, 3.0, 3.25, 3.5, 3.75, 4.0, 4.5, 5.0 Mm, ? Length – 8, 12, 15, 20, 30, 40 Mm , 6F Kbt - Ultra Low Profile Semi Complaint Ptca Balloon – Multilayer Polyamide Sandwich - Ce Approved •Kbt Shaft Compliance - Proximal - 1.73 F, Distal : 2.67 F •Ultra-Low Tip Entry Profile -.040Mm - Crossing Profile: 0.72 Mm/0.028, Rewrap Profile Of 1.84 Mm •Soft Multi-Layered Polyamide Sandwich Design, Trifold Rewrap Design With Selective Hydrophilic Coating At Distal Shaft Including Balloon Tip, Nominal Pressure: 6 Atm, Rated Burst Pressure (Rbp) - 16 Atm (14 Atm For 4.5Mm) •Length (Mm): 9,12,15,20,25,30 ? Diameter(Mm): 2,2.25,2.50,2.75,3.00,3.25,3.5,3.75,4.00 & 4.5 Mm , 6F Kbt – Non-Complaint Ptca Balloon – Multilayer Polyamide Sandwich - Ce Approved ? Kbt Shaft Compliance - Proximal 1.95F, Distal 2.67F ? Ultra-Low Tip Entry Profile -.041Mm - Crossing Profile: 0.72 Mm/0.028, Rewrap Profile Of 1.84 Mm ? Soft Multi-Layered Polyamide Sandwich Design, Trifold Rewrap Design With Selective Hydrophilic Coating At Distal Shaft Including Balloon Tip, Nominal Pressure: 12 Atm, Rated Burst Pressure (Rbp) - 20 Atm. ? Shortest Shoulder Length Of 2.51 Mm ? Length (Mm): 6, 8, 10,12,15,20,25,30 ? Diameter(Mm): 2, 2.25, 2.50, 2.75, 3.00, 3.25, 3.5, 3.75, 4.00 & 4.5 Mm , Thinnest Wall 0.08 Semi Compliant Balloon – Long Length– Ce Approved ? Np -6 Atm, Rbp – 18 Atm, Crossing Profile .65 ? Diameter – 1.25, 1.5, 2.0, 2.25, 2.50, 2.75, 3.00, 3.25, 3.5, 4.00 & 4.5 Mm ? Length –10,12,15,20,25,30, 35, 40 , Angled Shoulder Non-Compliant Balloon – Long Length– Ce Approved ? Angled Shoulder Balloon With Trifold Design, Polyamide Dual Layer, ? Np -8 Atm, Rbp – 20 Atm, Entry Profile -0.016,Crossing Profile .70 ? Diameter – 1.25, 1.5, 2.0, 2.25, 2.50, 2.75, 3.00, 3.25, 3.5, 4.00 & 4.5 Mm ? Length –10,12,15,20,25,30, 35, 40 , Ptca Scoring Balloon – Nitinol Helical Shaped Scoring Element – Usfda Approved ? Tapered Tip And Three Nitinol, Helical Shaped, Electropolished Scoring Elements With Rectangular Edges, Mounted On A Balloon With A Larger Working Range Of 2 Atm - 20 Atm ? Lesion Entry Profile .0172, Hydrophilic Coating, Laser Cut Hypotube, Np – 8 Atm, Rbp – 16 Atm ? Diameter -2.0Mm, 2.5Mm, 3.0Mm, 3.5Mm ? Lengths - 6Mm, 10Mm & 15Mm, 20Mm , Ptca Scoring Balloon – Nitinol Helical Shaped Scoring Element – Ce/Dcgi Approved ? Tapered Tip And Three Nitinol, Helical Shaped, Electropolished Scoring Elements With Rectangular Edges, Mounted On A Balloon With A Larger Working Range Of 2 Atm - 20 Atm ? Lesion Entry Profile .0172, Hydrophilic Coating, Laser Cut Hypotube, Np – 8 Atm, Rbp – 16 Atm ? Diameter -2.0Mm, 2.5Mm, 3.0Mm, 3.5Mm ? Lengths - 6Mm, 10Mm & 15Mm, 20Mm , Ptca Scoring Balloon – Triple Triangular Microtome – Pmda Approved ? Scoring Balloon With Triple Triangular Nylon Microtomes 0.0155” In Height With 120-Degree Angle Between Them. ? An Entry Profile Of O.0167 Inch With 2.2Fr Proximal Shaft And 2.6F Distal Shaft. ? Np-14 Atm Rbp Of 24 Atm ? Diameter -2.0Mm, 2.25Mm, 2.5Mm, 2.75Mm, 3.0Mm, 3.25Mm, 3.5Mm, 4.0Mm. ? Length – 13 Mm , Ptca Scoring Balloon Non-Compliant – High Presure - Single Wire – Usfda Approved ? Scoring Balloon With Single Wire Element, Tip Length – 10Mm, Crossing Profile .0350”. ? Slider Hydrophilic Catheter And Silicon Coated Lumen. ? An Entry Profile Of O.0167 Inch With 2Fr Proximal Shaft And 3F Distal Shaft. ? Np-12 Atm Rbp Of 22 Atm, Average Burst Pressure – 30Atm ? Diameter -2.0Mm, 2.25Mm, 2.5Mm, 2.75Mm, 3.0Mm, 3.25Mm, 3.5Mm, 3.75Mm, 4.0Mm. ? Length – 6, 8, 10, 12, 15, 18, 20, 23, 25, 30 Mm , Ptca Scoring Balloon Non-Compliant – High Presure - Single Wire – Ce/Dcgi Approved ? Scoring Balloon With Single Wire Element, Tip Length – 10Mm, Crossing Profile .0350”. ? Slider Hydrophilic Catheter And Silicon Coated Lumen. ? An Entry Profile Of O.0167 Inch With 2Fr Proximal Shaft And 3F Distal Shaft. ? Np-12 Atm Rbp Of 22 Atm, Average Burst Pressure – 30Atm ? Diameter -2.0Mm, 2.25Mm, 2.5Mm, 2.75Mm, 3.0Mm, 3.25Mm, 3.5Mm, 3.75Mm, 4.0Mm. ? Length – 6, 8, 10, 12, 15, 18, 20, 23, 25, 30 Mm , Ptca Cutting Balloon – Usfda Approved ? Bumper Tip, Acrylated Urethane Atherotome Adhesive, Atherotomes , Z-Glide™ Hydrophilic Coating ? Diameter -2.0Mm, 2.25Mm, 2.5Mm, 2.75Mm, 3.0Mm, 3.25Mm, 3.5Mm, 3.75Mm, 4.0Mm. ? Blade Length – 6, 10, 15 Mm , Ptca Cutting Balloon – Ce/Dcgi Approved ? Bumper Tip, Acrylated Urethane Atherotome Adhesive, Atherotomes , Z-Glide™ Hydrophilic Coating ? Diameter -2.0Mm, 2.25Mm, 2.5Mm, 2.75Mm, 3.0Mm, 3.25Mm, 3.5Mm, 3.75Mm, 4.0Mm. ? Blade Length – 6, 10, 15 Mm , Triploblastic Coated Drug Eluting Ptca Balloon - Ce/Dcgi Approved ? Must Have Optimum Concentration Of Sirolimus – 2.75Ug/Mm ? Diameter – 2 - 4Mm, Length - 10 – 30Mm ? Must Have Nominal Pressure 8Atm, Rbp-16Atm , Durg Eluting Pta Balloon For Below The Knee Peripheral Artery-Dcgi Approved Paclitaxel Drug-Coated Pta Balloon Recommended Guide Wire- Otw (Btk): 0.018 Length (Mm): 80,100,120 & 150 Diameter (Mm): 2,2.5,3 & 4 Recommended Guide Wire- Otw (Sfa): 0.035 Length (Mm): 100,120 & 150 Diameter (Mm): 5,6 & 7 , Drug Eluting Ptca Balloon- Us Fda Approved ? All Types & Sizes ? Different Types Of Drugs , Drug Eluting Ptca Balloon- Ce Approved ? All Types & Sizes ? Different Types Of Drugs , Drug Eluting Ptca Balloon- Dcgi Approved ? All Types & Sizes ? Different Types Of Drugs , Balloon Dilatation Catheter For Aorta & Ivc- Us Fda Approved ?Monorail (Rapid Exchange) And Over-The-Wire (Otw) Balloons ?Available In The Sizes And Lengths , Balloon Dilatation Catheter For Aorta & Ivc- Ce Approved ?Monorail (Rapid Exchange) And Over-The-Wire (Otw) Balloons ?Available In The Sizes And Lengths , Balloon Dilatation Catheter For Aorta & Ivc- Dcgi Approved ?Monorail (Rapid Exchange) And Over-The-Wire (Otw) Balloons ?Available In The Sizes And Lengths , Bib (Balloon In Balloon) Type Balloons For Coarctation Dilatation - Us Fda Approved ?Monorail (Rapid Exchange) And Over-The-Wire (Otw) Balloons ?Available In The Sizes And Lengths , Bib (Balloon In Balloon) Type Balloons For Coarctation Dilatation - Ce Approved ?Monorail (Rapid Exchange) And Over-The-Wire (Otw) Balloons ?Available In The Sizes And Lengths , Bib (Balloon In Balloon) Type Balloons For Coarctation Dilatation - Dcgi Approved ?Monorail (Rapid Exchange) And Over-The-Wire (Otw) Balloons Available In The Sizes And Lengths , Z Med Type Balloon For Aortic Coactation – Us Fda/Ce Approved ?5 To 20 Cm Diameter In All Sizes Otw / Rapid Exchange, Compatible With 0.014”/0.035” And 0.038” Wire , Z Med Type Balloon For Aortic Coactation – Dcgi Approved ?5 To 20 Cm Diameter In All Sizes ?Otw / Rapid Exchange, Compatible With 0.014”/0.035” And 0.038” Wire , Z Med Type Balloon For Aortic Coactation – Us Fda/Ce Approved More Than 20 Cm Diameter In All Sizes Otw / Rapid Exchange, Compatible With 0.014”/0.035” And 0.038” Wire , Z Med Type Balloon For Aortic Coactation – Dcgi Approved ?More Than 20 Cm Diameter In All Sizes ?Otw / Rapid Exchange, Compatible With 0.014”/0.035” And 0.038” Wire , Proximal Optimization Balloon – Usfda Approved ? Specialised Proximal Optimisation Balloon Dilatation Catheter With Ultra Short Balloon Shoulder Of 0.6Mm And An Rbp Of 22 Atm With Sizes Ranging From A Length Of 6-15 Mm And Diameters Ranging From 2.25-5 Mm. Hydrophilic External Surface Coating From Tip To Adjacent Guidewire Port And Silicone Coating Inside Guidewire Lumen. , Proximal Optimization Balloon – Ce/Dcgi Approved ? Specialised Proximal Optimisation Balloon Dilatation Catheter With Ultra Short Balloon Shoulder Of 0.6Mm And An Rbp Of 22 Atm With Sizes Ranging From A Length Of 6-15 Mm And Diameters Ranging From 2.25-5 Mm. Hydrophilic External Surface Coating From Tip To Adjacent Guidewire Port And Silicone Coating Inside Guidewire Lumen. , Ptca High Pressure Cto Balloon – Usfda Approved ? 0.75 Mm Cto Balloon With A Tip Entry Profile Of 0.015” And Ultra Low Crossing Profile Of 0.020” With A Proprietary Distal Welding Technology, 2.2F Distal Shaft, Rated Burst Pressure Of 20 Atm And Average Burst Pressure Of = 28 Atm. ? Diameters From 0.75Mm, 1.0Mm, 1.25Mm, 1.50Mm, 1.75Mm & 2.0Mm ? Lengths From 5Mm, 8Mm, 10Mm, 15Mm, 20Mm, 25Mm & 30Mm. , Ptca High Pressure Cto Balloon – Ce/Dcgi Approved ? 0.75 Mm Cto Balloon With A Tip Entry Profile Of 0.015” And Ultra-Low Crossing Profile Of 0.020” With A Proprietary Distal Welding Technology, 2.2F Distal Shaft, Rated Burst Pressure Of 20 Atm And Average Burst Pressure Of = 28 Atm. ? Diameters From 0.75Mm, 1.0Mm, 1.25Mm, 1.50Mm, 1.75Mm & 2.0Mm ? Lengths From 5Mm, 8Mm, 10Mm, 15Mm, 20Mm, 25Mm & 30Mm. , Rotalink Burr - Us Fda Approved (Compatible With Existing Rota Machine Cath Lab Gmc Kots). , Rotalink Burr – Dcgi Approved (Compatible With Existing Rota Machine Cath Lab Gmc Kota). , Rotalink Advancer - Us Fda Approved (Compatible With Existing Rota Machine Cath Lab Gmc Kota). , Rotalink Advancer - Ce Approved (Compatible With Existing Rota Machine Cath Lab Gmc Kota). , Rotalink Advancer – Dcgi Approved (Compatible With Existing Rota Machine Cath Lab Gmc Kota). , Rotalink Plus (Advancer & Burr) - Us Fda Approved (Compatible With Existing Rota Machine Cath Lab Gmc Kota ). , Rotalink Plus (Advancer & Burr) - Ce Approved (Compatible With Existing Rota Machine Cath Lab Gmc Kota , Rotalink Plus (Advancer And Burr) – Dcgi Approved (Compatible With Existing Rota Machine Cath Lab Gmc Kota , Rotational Atherectomy Guide Wires - Us Fda Approved , Rotational Atherectomy Guide Wires - Ce Approved , Rotational Atherectomy Guide Wires –Dcgi Approved , Rotaglide Lubricant - Us Fda Approved , Rotaglide Lubricant - Ce Approved , Rotaglide Lubricant – Dcgi Approved , Rotawire – Us Fda Approved Should Be Compatible To Rota Machine In Cath Lab Gmc Kota , Rotawire – Dcgiapproved Should Be Compatible To Rota Machine In Cath Lab Gmc Kota. , Heart Pump Catheter And Smartassist Sensor ? Usfda & Ce Approved Percutaneous Heart Pump Capable Of Pumping Blood @ 3.5-5 L/Min To Provide Hemodynamic Support For Hemodynamic Stabilization To Enable Heart Recovery. Maintain Patient Hemodynamics During Planned Temporary Coronary Occlusions By Maintaining Mean Arterial Pressure (Map), Which May Allow For A More Thorough Procedure And A More Complete Revisualization Ma Single Session. , Nirs+Ivus Catheter ? Usfda & Japan Pmda Approved Near Infrared Spectroscopy & Intravascular Imaging Catheter For Detection Of Lipid Core Plaques (Lcp) And Assessment Of Vessel Structure With An Automatically Adjustable Frequency Bandwidth Of 35-65 Mhz Depending On The Need Of The Calcium With A Pullback Speed Upto 2Mm/Sec And A Pullback Length If 150 Mm. Catheter Working Length Of 160 Cm , Ivus Catheter With Accessories - Usfda Approved ? Compitable To Volcano Imaging Machine In Cath Lab, Govt.Medical College Kota- , Ivus Catheter With Accessories - Ce/Dcgi Approved ? Compitable To Volcano Imaging Machine In Cath Lab, Govt.Medical College Kota- , Shockwave I.V.L Intravascularlithotripsy Catheter System With Connector Cable - Dcgi With Us Fda / Ce Approved , I.V.L Indegenous Intravascularlithotripsy Catheter System With Connector Cable – Dcgi , Ivus Catheter Hd 60 Mhz Coronary Imaging Catheters. - Us Fda Approved Should Be Compatible With Available Machine , Ivus Catheter Hd 60 Mhz Coronary Imaging Catheters. – Ce/Dcgi Approved Should Be Compatible With Available Machine , Ivus Catheter40 Mhz Coronary Imaging Catheters. - Us Fda Approved Should Be Compatible With Available Machine , Ivus Catheter40 Mhz Coronary Imaging Catheters. - Us Fda Approved Should Be Compatible With Available Machine , Laser Atherectomy Catheter X-80 Catheters With Guidewire Compatanility Of 0.014 Inch , Guiding Catheter Compatability Of 6F, Maximum Tip Outer Diameter Ofm 0.038Inch , Maximum Shaft Outer Diameter Of 0.049 Inchwith A Working Length Of 100 Mm , Capability To Generate A Fluence Of 30- 80 Mj/Mm2 With A Repitation Rate Of 25-80 Hertz. Available In 0.9 Mm And 1.4 Mm Sizes. , Fractional Flow Reserve Pressure Wire 1. Shouldbe0.014”Guidewire. 2. Should Have High-Fidelity Piezo Electric Pressure Sensor Technology For Measurement Of Intravascular Pressure. 3. The System Should Work Wireless Radio Using Frequency-Hopping Spread Spectrum To Ensure Secured Radio Connection With Pressurewire 4. Thepressurewireshouldbecapableofwiredconnectiontoffrmachine. 5. Shouldhavesensorhousingdesignwithmultiplelargewindows(Multiwindow Jacket). 6. Shouldhaveaflatcoretipdesignforabettershapeability&Shaperetention. 7. Shouldpreferablyhavehydrophiliccoating 8. Shouldhavearadioopaquetip. 9. Shouldhaveoperatingpressurerangeof-30To+300Mmhg. 10.Should Have Frequency Response Of Dc To 25 Hz. 11.Should Have Radio Range Of At Least 2M. 12.Should Have Battery Time Of Transmitter For At Least 3 Hours. 13.Should Have A Wireless Transmission Frequency Range Of 2.4000 – 2.4835 Ghz , Oct Catheter: Catheter For Intracoronary Oct, 0.014 Guidewire And 6 F Guide Catheter Compatibility. Lubricous Hydrophilic Coating And Low Tip Entry Profile For Crossing Tight, Distal Lesions.2.7 F Crossing Profile And Supportive Proximal Shaft Provide Superb Deliverability To The Area Of Interest. Lens Marker Is Immediately Proximal To Imaging Lens And The Distance Of Lens Marker From Tip Should Be 23 Mm And Proximal Marker At 82 Mm From The Lens Marker. Threeradiopaque Marker , Temporary Bipolar Pacing Catheter- Flow Directed 1. Should Be Us Fda & Dcgi Approved 2. Should Be Latex Balloon Tipped, Flow Guided For Stable Insertion. 3. Should Have 10 Cm Depth Markers To Enhance Placement. 4. Should Have Smooth, Polyurethane Hemocompatible Coating. 5. Should Have Clearly Marked Terminals. 6. Should Have Shrouded 2 Mm Pin Connector Leads. 7. Should Have Platinum Electrodes 8. It Should Have Flexible Tip Design For Delicate Placement. , Temporary Bipolar Pacing Catheter- Torque Control 1. Should Be Us Fda & Dcgi Approved 2. Should Have 10 Cm Depth Markers To Enhance Placement. 3. Should Have Smooth, Polyurethane Hemocompatible Coating. 4. Should Have Clearly Marked Terminals. 5. Should Have Shrouded 2 Mm Pin Connector Leads. 6. Should Have Stainless Steel Centre Conductor And Stainless Steel Electrodes. 7. It Should Have Solid Core Enables User To Customize The Curve. 8. Should Have Optimal Torque Control For Challenging Anatomy , Orbital Atherectomy Device 6F Compatible Orbital Atherectomy Device With 1.25Mm Diamond Coated Crown Designed For Bidirectional Superficial Calcium Sanding And Modify Deep Calcium Through Pulsatile Forces To Facilitates Stent Delivery And Expansion In Severely Calcified Lesions With Durable Nitinol Guidewire With 0.12” Proximal And 0.14” Distal End Along With Viper Slide Lubricant , Oas Pump Provides The Saline Pumping Mechanism And Power To The Oad With 250 V 4A Slow Blow, 1/4” X 1 - 1¼” Meter Fuse, Abs Plastic External Housing, (100–240 Vac @ 50–60 Hz) External Connector. Includes A Bult In Audible Information Signal For Approximately Every 25 Sec Of Oad Spin Time. Audible Information Signal Every 5 Sec For A Total Of 30 Sec When The Saline Level Falls Below 200 Ml.During A Treatment Period. The Small, Reusable, And Portable Oas Pump Attaches To A Standard Five-Wheel Rolling Intravenous (Iv) Pole Or Table Mount Pole. , Pressure Wire For Ffr/Dfr – Usfda , Pressure Wire For Ffr/Dfr – Ce/Dcgi , Iabp Catheter With Accessories - Us Fda Approved Should Be Compatible With Existing Machine (Data Scope) In Cath Lab, Gmck , Iabp Catheter With Accessories - Ce Approved Should Be Compatible With Existing Machine (Data Scope) In Cath Lab, Gmck , Iabp Catheter With Accessories Dcgi Approved Should Be Compatible With Existing Machine (Data Scope) In Cath Lab, Gmck , Tpi Lead – Usfda Approved , Tpi Lead – Ce Approved , Tpi Lead – Dcgi Approved , Vascular Closure Device With Bio Absorbable Pga Suture That Provide A Secure Seal •Bioabsorbable Collagen Designed, •Low Profile Bioabsorbable Anchor (50:50 Blend Glycolide And Lactide Polyer) •Must Have Bovine Collagen Plug. Must Have 9 Hole V-Twist Pattern Suture Weave. •Must Be Available In 6F And 8F Sizes. Usfda+Pmda Approved , Vascular Closure Device With Bio Absorbable Pga Suture That Provide A Secure Seal •Bioabsorbable Collagen Designed, •Low Profile Bioabsorbable Anchor (50:50 Blend Glycolide And Lactide Polyer) •Must Have Bovine Collagen Plug. Must Have 9-Hole V-Twist Pattern Suture Weave. •Must Be Available In 6F And 8F Sizes. Ce/Dcgi Approved , Everolimus Eluting Cobalt Chromium Stent – Usfda Approved ? Everolimus Eluting Cobalt Chromium Stent With Peak To Valleynon-Linear Links With Narrower And Slimmer Crests And Ultra- Low Crossing Profile Of 0.039 Inches For Precise Placement And Zero Transition Distal Shaft. Should Have Flourinated Co- Polymer. Should Come In Diameters From 2.00 Mm To 4.00 Mm With 5.5 Mm Post-Dilatation Capability For 3.5 Mm And 4.0 Mm Stents , Everolimus Eluting Cobalt Chromium Stent – Ce/Dcgi Approved ? Everolimus Eluting Cobalt Chromium Stent With Peak To Valley Non Linear Links With Narrower And Slimmer Crests And Ultra-Low Crossing Profile Of 0.039 Inches For Precise Placement And Zero Transition Distal Shaft. Should Have Flourinated Co-Polymer. Should Come In Diameters From 2.00 Mm To 4.00 Mm With 5.5 Mm Post-Dilatation Capability For 3.5 Mm And 4.0 Mm Stents , Everolimus Eluting Cobalt Chromium Stent – Usfda Approved ? Everolimus Eluting Cobalt Chromium Stent With Peak To Valley Taller Non Linear Links And True Centre Tip Technology For Precise Placement And Zero Transition Distal Shaft. Should Have Flourinated Co-Polymer. Should Come In Diameters From 2.00 Mm To 4.00 Mm , Everolimus Eluting Cobalt Chromium Stent – Ce/Dcgi Approved ? Everolimus Eluting Cobalt Chromium Stent With Peak To Valley Taller Non Linear Links And True Centre Tip Technology For Precise Placement And Zero Transition Distal Shaft. Should Have Flourinated Co-Polymer. Should Come In Diameters From 2.00 Mm To 4.00 Mm , Everolimus Eluting Cobalt Chromium Stent – Usfda Approved ? Everolimus Eluting Cobalt Chromium Stent With Peak To Valley Taller Non Linear Links And 5 Fold Balloon Technology And Should Have Flourinated Co Polymer. Skive Technology To Have A Better Pushability. Should Come In Diameters From 2.00 Mm To 4.00 Mm. , Everolimus Eluting Cobalt Chromium Stent – Ce/Dcgi Approved ? Everolimus Eluting Cobalt Chromium Stent With Peak To Valley Taller Non Linear Links And 5 Fold Balloon Technology And Should Have Flourinated Co Polymer. Skive Technology To Have A Better Pushability. Should Come In Diameters From 2.00 Mm To 4.00 Mm. , Everolimus Eluting Cobalt Chromium Stent – Logn Length Usfda Approved ? Everolimus Eluting Cobalt Chromium Stent With Peak To Valley Taller Non Linear Links And 5 Fold Balloon Technology And Should Have Flourinated Co Polymer. Skive Technology To Have A Better Pushability. Should Come In Diameters From 2.00 Mm To 4.00 Mm Upto 48 Mm Length. , Everolimus Eluting Cobalt Chromium Stent – Logn Length - Ce Approved ? Everolimus Eluting Cobalt Chromium Stent With Peak To Valley Taller Non Linear Links And 5 Fold Balloon Technology And Should Have Flourinated Co Polymer. Skive Technology To Have A Better Pushability. Should Come In Diameters From 2.00 Mm To 4.00 Mm Upto 48 Mm Length. , Everolimus Eluting Cobalt Chromium Stent – Usfda Approved ? Usfda Approved Everolimus Eluting Cobalt Chromium Stent With Peak To Valley Taller Non Linear Links And Dual Layer Pebax Balloon Technology And Should Have Flourinated Co Polymer. Ss Junction Support Mandrel To Have A Better Pushability. Should Come In Diameters From 2.00 Mm To 4.00 Mm. , Everolimus Eluting Cobalt Chromium Stent – Ce/Dcgi Approved ? Usfda Approved Everolimus Eluting Cobalt Chromium Stent With Peak To Valley Taller Non Linear Links And Dual Layer Pebax Balloon Technology And Should Have Flourinated Co Polymer. Ss Junction Support Mandrel To Have A Better Pushability. Should Come In Diameters From 2.00 Mm To 4.00 Mm. , Everolimus Eluting Platinum Chromium Stent - Durable Polymer– Usfda Approved , Everolimus Eluting Platinum Chromium Stent - Durable Polymer – Ce/Dcgi Approved , Everolimus Eluting Platinum Chromium Stent – Biodegradable Polymer - Ce/Dcgi Approved , Everolimus Eluting Platinum Chromium Stent – Biodegradable Polymer -Ce/Dcgi Approved , Sirolimus Eluting Cobalt-Chromium Stent With Abluminal Gradient Coating - (L-605 Co-Cr Alloy) – Usfda/Pmda (Should Not Have Drug & Polymer Coating On Joints & Bends). 2 Links – 8 Crown Design •Bioresorbable Polymer Of Plcl (Poly Lactic Acid + Poly Capro Lactone Pcl) With Degradation Time Of 3-4 Months. Should Have Bioinspired Open Cell In Phase Design. •Low Concentration Of Sirolimus (0.8Ug/Mmsq). •Minimum Tip Entry Profile Of 0.42Mm , Sirolimus Eluting Cobalt-Chromium Stent With Abluminal Gradient Coating - (L-605 Co-Cr Alloy) – Ce/Dcgi (Should Not Have Drug & Polymer Coating On Joints & Bends). 2 Links – 8 Crown Design •Bioresorbable Polymer Of Plcl (Poly Lactic Acid + Poly Capro Lactone Pcl) With Degradation Time Of 3-4 Months. Should Have Bioinspired Open Cell In Phase Design. •Low Concentration Of Sirolimus (0.8Ug/Mmsq). Minimum Tip Entry Profile Of 0.42Mm , Optimized Overexpansion, Up To 6.25 Mm For Large Vessel- Sirolimus Eluting Cobalt-Chromium Stent With Advanced Core Wire Shaft Technology & Abluminal Gradient Coating - (L-605 Co-Cr Alloy) – Usfda/Pmda ? Should Not Have Drug & Polymer Coating On Joints & Bends. 2 Links – 8 & 10 Crown Design ? Must Have Advanced Core Wire Shaft Technology. ? Should Have An Over Expansion Limit Of More Than 1.5 Mm Of The Stated Diameter ? Must Have Rounded & Flexible Tip Made Up Of Polyamide Elastomer. ? Bioresorbable Polymer Of Plcl (Poly Lactic Acid + Poly Caprolactone Pcl) With Degradation Time Of 3-4 Months. Should Have Bioinspired Open Cell In Phase Design. Low Concentration Of Sirolimus (0.8Ug/Mmsq), Tip Entry Profile Of 0.42Mm. , Optimized Overexpansion, Up To 6.25 Mm For Large Vessel- Sirolimus Eluting Cobalt-Chromium Stent With Advanced Core Wire Shaft Technology & Abluminal Gradient Coating - (L-605 Co-Cr Alloy) – Ce/Dcgi ? Should Not Have Drug & Polymer Coating On Joints & Bends. 2 Links – 8 & 10 Crown Design ? Must Have Advanced Core Wire Shaft Technology. ? Should Have An Over Expansion Limit Of More Than 1.5 Mm Of The Stated Diameter ? Must Have Rounded & Flexible Tip Made Up Of Polyamide Elastomer. ? Bioresorbable Polymer Of Plcl (Poly Lactic Acid + Poly Caprolactone Pcl) With Degradation Time Of 3-4 Months. Should Have Bioinspired Open Cell In Phase Design. Low Concentration Of Sirolimus (0.8Ug/Mmsq), Tip Entry Profile Of 0.42Mm. , Sirolimus Eluting With Probio Coating Stent – Usfda Approved Sirolimus Eluting Cobalt Chromium Stents, Ultrathin Struts 60 Um. Should Have Coating Passive Probio Coating (Amorphous Silicon Carbide). Should Have Active Coating Bio Lute Bioabsorbable Ploy-L-Lactide. Should Be Usfda Approved. , Sirolimus Eluting With Probio Coating Stent – Ce/Dcgi Approved Sirolimus Eluting Cobalt Chromium Stents, Ultrathin Struts 60 Um. Should Have Coating Passive Probio Coating (Amorphous Silicon Carbide). Should Have Active Coating Bio Lute Bioabsorbable Ploy-L-Lactide. Should Be Usfda Approved. , Sirolimus Eluting With Silicon Carbide Coating Stent – Usfda Approved Sirolimus Eluting Cobalt Chromium Stents With Amorphous Silicon Carbide Coating. Should Be Usfda Approved. , Sirolimus Coated Stainless Steel Stent – Ce Approved ?Porus Surface, Shellac Resin (Wax-Free), Bioresorbable Polymer , Sirolimus Eluting Cobalt Chromium Platform, - Us Fda / Ce Approved ? Biodegradable Polymer, And Microporus ? Surface With Soft Coating Of Shellac Rasin. , Sirolimus Cluting, Stainless Steel Platform, - Us Fda / Ce Approved ? Biodegradable Polymer, Microporus Surfacewith Soft Coating Of Shellac Rasin With Temperature Control Packing & Temperature ? Sensitive Check Meter. , Dual Drug Polymer Free Drug Eluting Stent - Dcgi With Us Fda /Ce Approved ? Should Have Cobalt Chromium Platform With Prubocol Drug At Place Of Polymer. ? Should Have No Polymer. ? Abluminal Coating On Microporus Surface With Soft Coating Of Shellac Rasin. , Dual Drug Polymer Free Drug Eluting Stent - Dcgi Approved ? Should Have Cobalt Chromium Platform With Prubocol Drug At Place Of Polymer. ? Should Have No Polymer. Abluminal Coating On Microporus Surface With Soft Coating Of Shellac Rasin. , Bio-Resorbable Scaffold (Brs) ? Sirolimus Eluting Bio-Resorable Scaffold Stent System - Dcgi With Us Fda / Ce Approved ? All Sizes And Diameter , Sirolimus Coated Drug Stent - Ce Approved • Open Cell Design Only With Two Connectors Between The Rings, Stent Material: Cocr Per Astm F562 • 60? Ultra-Thin Struts Across All Diameters And Lengths • Crossing Profile Of = 0.97Mm Tip Entry Profile: 0.017”, Ldz Link: Long Dual ‘Z’ Link • Rbp: 16 Atm • Length (Mm): 8 To 48 Mm • Diameter(Mm): 2.25 To 4.00 Mm , Sirolimus Coated Drug Stent - Dcgi Approved • Open Cell Design Only With Two Connectors Between The Rings, Stent Material: Cocr Per Astm F562 • 60? Ultra-Thin Struts Across All Diameters And Lengths • Crossing Profile Of = 0.97Mm Tip Entry Profile: 0.017”, Ldz Link: Long Dual ‘Z’ Link • Rbp: 16 Atm • Length (Mm): 8 To 48 Mm • Diameter(Mm): 2.25 To 4.00 Mm , Everolimus Coated Drug Eluting Cobalt Chromium Coronary Stent - Dcgi Approved • Everolimus Drug Eluting Stent, Open Cell Design Only With Two Connectors Between The Rings • Stent Material & Design: L-605 Co-Cr Alloy With Laser Cut Seamless Tubing In Serpentine Pattern. • 60? Ultra-Thin Struts Across All Diameters And Lengths, Crossing Profile Of = 0.97Mm, Tip Entry Profile: 0.017” • Ldz Link: Long Dual ‘Z’ Link, Ifu Labeled Overexpansion Of The Highest Available Diameter Should Be = 5.50 Mm • Rbp: 16 Atm • Length (Mm): 8 To 48 Mm • Diameter(Mm): 2.25 To 4.00 Mm , Sirolimus Coated Drug Stent Ce Approved • Open Cell Design Only With Two Connectors Between The Rings • Stent Material & Design: L-605 Co-Cr Alloy With Laser Cut Seamless Tubing In Serpentine Pattern. • 60? Ultra-Thin Struts Across All Diameters And Lengths -Long Link Design • Crossing Profile Of = 0.97Mm,M Tip Entry Profile: 0.41Mm • Rbp: 16 Atm • Length (Mm): 8 To 48 Mm • Diameter(Mm): 2.25 To 4.00 Mm , Sirolimus Coated Drug Stent Dcgi Approved • Open Cell Design Only With Two Connectors Between The Rings • Stent Material & Design: L-605 Co-Cr Alloy With Laser Cut Seamless Tubing In Serpentine Pattern. • 60? Ultra-Thin Struts Across All Diameters And Lengths -Long Link Design • Crossing Profile Of = 0.97Mm,M Tip Entry Profile: 0.41Mm • Rbp: 16 Atm • Length (Mm): 8 To 48 Mm • Diameter(Mm): 2.25 To 4.00 Mm , Covered Stent Usfda Approved , Covered Stent Ce/Dcgi Approved , Covered Coronary Stents - Us Fda Approved , Covered Coronary Stents – Ce/Dcgi Approved Covered Graft Stent For Dissected Artery , Guidewire For Peripheral Intervention – Nitinol Alloy Regular Length ? Tip Load Options Of 6 G, Nitinol Lengths Of 10 Cm , Guidewire For Peripheral Intervention – Nitinol Alloy Regular Length ? Tip Load Options Of 4 G, Nitinol Lengths Of 25 Cm , Guidewire For Peripheral Intervention – Nitinol Alloy Regular Length– ? Tip Load Options Of 3.5 G, Nitinol Lengths Of 40 Cm , Guidewire For Peripheral Intervention – Nitinol Alloy Regular Length– ? Tip Load Options Of 2.8 G, Nitinol Lengths Of 40 Cm , Guidewire For Peripheral Intervention – Stainless Steel, Regular Length ? .018Short Taper, Bare Coil, Core To Tip, Tip Load – 4.6 Gm , Pta Balloon – 12-200Mm - Usfda ? Diameters 1.5, 2.0, 2.5, 3.0, And 4.0 Mm, Length – 12, 20, 40, 60, 80, 120, 200 ? 4F Sheath Compatible, Hydrophilic Coating, Tungsten Markers, Np- 8, Rbp - 14 , Pta Balloon - 12-200Mm – Ce/Dcgi ? Diameters 1.5, 2.0, 2.5, 3.0, And 4.0 Mm, Length – 12, 20, 40, 60, 80, 120, 200 ? 4F Sheath Compatible, Hydrophilic Coating, Tungsten Markers, Np- 8, Rbp - 14 , Pta Balloon – 20-200Mm - Usfda Approved ? Diameters 2.0, 2.5, 3.0, 4.0, 5.0, 5.5, 6.0, Length – 20, 40, 60, 80, 120, 150, 180, 200 ? 4F/5F Sheath Compatible, Hydrophilic Coating, Tungsten Markers, Np- 8, Rbp – 14 ? Coaxial, Over-The-Wire Design,One-Piece Catheter Construction,Hydrophobic Coating , Pta Balloon – 20-200Mm Ce/Dcgi ? Diameters 2.0, 2.5, 3.0, 4.0, 5.0, 5.5, 6.0, Length – 20, 40, 60, 80, 120, 150, 180, 200 ? 4F/5F Sheath Compatible, Hydrophilic Coating, Tungsten Markers, Np- 8, Rbp – 14 ? Coaxial, Over-The-Wire Design,One-Piece Catheter Construction,Hydrophobic Coating , Pta Balloon – 20-250Mm - Usfda ? Diameters 3 -12 Mm, Length – 20, 40, 60, 80, 120, 150, 200, 250 ? 5-7 F Sheath Compatible, Hydrophilic Coating, Tungsten Markers, , Pta Balloon – 20-250Mm – Ce/Dcgi ? Diameters 3 -12 Mm, Length – 20, 40, 60, 80, 120, 150, 200, 250 ? 5-7 F Sheath Compatible, Hydrophilic Coating, Tungsten Markers, , Pta Balloon – 15-40Mm – Usfda ? Diameters 4 -7 Mm, Lengths Of 15 Mm, 20 Mm, 30 Mm, And 40 Mm ? Xcelon Balloon Material With A 14 Atm Rbp,Hydrophobic Coated Shaft And Balloon,Np- 8, Rbp – 14 , Pta Balloon – 15-40Mm – Ce/Dcgi ? Diameters 4 -7 Mm, Lengths Of 15 Mm, 20 Mm, 30 Mm, And 40 Mm Xcelon Balloon Material With A 14 Atm Rbp,Hydrophobic Coated Shaft And Balloon,Np- 8, Rbp – 14 , Pta Balloon Dilatation Catheter – Usfda ? Diameters 3 -12 Mm, Length – 20, 30, 40, 60, 80, 100, 120, 150, 200 -? Up To 24 Atm (2431 Kpa) Rated Burst Pressure ? Nybax Balloon Material, 3 Wings On 3-5 Mm, 5 Wings On 6 Mm And Plus, Mediglide Hydrophilic Coating , Pta Balloon Dilatation Catheter – Ce/Dcgi ? Diameters 3 -12 Mm, Length – 20, 30, 40, 60, 80, 100, 120, 150, 200 ? Up To 24 Atm (2431 Kpa) Rated Burst Pressure Nybax Balloon Material, 3 Wings On 3-5 Mm, 5 Wings On 6 Mm And Plus, Mediglide Hydrophilic Coating , Ultra-High-Pressure Balloon -With Pressures Up To 40 Atm - Usfda ? Diameters 4 -12 Mm, Length – 20, 30, 40, 60, 80, 100 - ? Up To 40 Atmrated Burst Pressure , Ultra-High-Pressure Balloon -With Pressures Up To 40 Atm -Ce/Dcgi ? Diameters 4 -12 Mm, Length – 20, 30, 40, 60, 80, 100 Up To 40 Atmrated Burst Pressure , 0.018” Balloon Dilatation Catheter - Usfda ? 0.020” Lesion Entry Profile On A 0.018” Wire ? 2-10 Mm Diameters, 10-220 Mm Lengths , 0.018” Balloon Dilatation Catheter -Ce/Dcgi ? 0.020” Lesion Entry Profile On A 0.018” Wire 2-10 Mm Diameters, 10-220 Mm Lengths , 0.035” Balloon Dilatation Catheter -Usfda ? 0.020” Lesion Entry Profile On A 0.018” Wire ? 12, 14, 16, 18 Mm Diameters, 20, 40, 60 Mm Lengths , 0.035” Balloon Dilatation Catheter -Ce/Dcgi ? 0.020” Lesion Entry Profile On A 0.018” Wire 12, 14, 16, 18 Mm Diameters, 20, 40, 60 Mm Lengths , 0.014” Balloon Dilatation Catheter -Usfda ? 0.017 Lesion Entry Profile, Nybax Balloon Material , 0.014” Balloon Dilatation Catheter -Ce/Dcgi 0.017 Lesion Entry Profile, Nybax Balloon Material , Cutting Balloon For Renal And Peripheral Arteries - Us Fda Approved ?Monorail (Rapid Exchange) And Over-The-Wire (Otw) Balloons Available In The Sizes And Lengths , Cutting Balloon For Renal And Peripheral Arteries - Ce Approved ?Monorail (Rapid Exchange) And Over-The-Wire (Otw) Balloons Available In The Sizes And Lengths , Cutting Balloon For Renal And Peripheral Arteries - Dcgi Approved ?Monorail (Rapid Exchange) And Over-The-Wire (Otw) Balloons Available In The Sizes And Lengths , Otw Balloon For Periferal Angioplasty All Size And Diameters- Ce/ Fda Approved , Otw Balloon For Periferal Angioplasty All Size And Diameters- Dcgi Approved , Btk Everolimus Eluting Resorbable Scaffold System – Usfda , Btk Everolimus Eluting Resorbable Scaffold System – Ce/Dcgi , Peripheral Self Expandable Interwoven Nitinol Stent Forsuperficial Femoral Artery (Sfa) And / Or Proximal Popliteal Artery- Usfda Approved , Peripheral Self Expandable Interwoven Nitinol Stent Forsuperficial Femoral Artery (Sfa) And / Or Proximal Popliteal Artery- Dcgi/Ce Approved , Self-Expanding Peripheral Stent – Usfda Approved ? Tri-Axial Technology Specifications, Flexible Nitinol Material , Self-Expanding Peripheral Stent – Ce/Dcgi Approved ? Tri-Axial Technology Specifications, Flexible Nitinol Material , Balloon-Expanding Peripheral Stent – Usfda Approved ? Cobalt Chromium Multi-Link Technology, Dual-Layer Balloon , Balloon-Expanding Peripheral Stent – Usfda Approved ? Cobalt Chromium Multi-Link Technology, Dual-Layer Balloon , Renal Stent System – Usfda Approved ? Cobalt Chromium Multi-Link Technology , Renal Stent System – Ce/Dcgi Approved Cobalt Chromium Multi-Link Technology , Carotid Stent – Usfda ? Closed-Cell Design For Crush Resistance,Rotational Deployment Handle With Freestyle,U- And S-Shaped Connectors , Carotid Stent – Ce/Dcgi ? Closed-Cell Design For Crush Resistance,Rotational Deployment Handle With Freestyle,U- And S-Shaped Connectors , Carotid Stent – Usfda Straight And Tapered Stent Options, Nitinol Material , Carotid Stent – Ce/Dcgi Closed-Cell Design For Crush Resistance,Rotational Deployment Handle With Freestyle,U- And S-Shaped Connectors , Embolic Protection System – Usfda Centered Wire Design, Circumferential Nitinol Frame, Platinum-Tungsten Frame Coils, Barewir Technology , Embolic Protection System – Ce/Dcgi Centered Wire Design, Circumferential Nitinol Frame, Platinum-Tungsten Frame Coils, Barewir Technology , Vascular Plug – Single Lobe , Vascular Plug- Multi-Layered Mesh Designed, Six Planes Of Cross Sectional Coverage , Suture-Mediated Closure And Repair System – Usfda Approved , Suture-Mediated Closure (Smc) For Both Arterial And Venous Access – Usfda , Suture-Mediated Closure (Smc) For Both Arterial And Venous Access – Ce/Dcgi , Renal And Biliary Premounted Stent System – Usfda Macr Elements And Additional Proximal Connectors , Renal And Biliary Premounted Stent System – Ce/Dcgi Macr Elements And Additional Proximal Connectors , Drug Coated Balloon For Pta – Usfda Transpax Coating,Paclitaxel-Coated Pta Balloon Catheter , Drug Coated Balloon For Pta – Usfdace/Dcgi Transpax Coating,Paclitaxel-Coated Pta Balloon Catheter , Carotid Stent – Usfda Approved Closed Cell Design, , Carotid Stent – Ce/Dcgi Approved Closed Cell Design, , Iliac And Biliary Premounted Stent System – Usfda Macro Elements Engineered , Iliac And Biliary Premounted Stent System – Ce/Dcgi Macro Elements Engineered , Renal And Biliary Premounted Stent System – Usfda Tandem Architectur Stent Design , Renal And Biliary Premounted Stent System – Ce/Dcgi Tandem Architectur Stent Design , Self Expanding Peripheral Stent – Usfda Approved , Peripharel Drug-Eluting Vascular Stent -Usfda , Peripharel Drug-Eluting Vascular Stent -Ce/Dcgi , Self-Expanding Stent System For Iliac – Usfda , Self-Expanding Stent System For Iliac – Ce/Dcgi , Distal Protection Device 0.014 Wire Umbrella Type Coronary Filter - Us Fda/Ce Approved , Distal Protection Device 0.014 Wire Umbrella Type Coronary Filter - Dcgi Approved , Distal Protection Device 0.014 Wire Umbrella Type Carotid Artery Filter - Us Fda/Ce Approved , Distal Protection Device 0.014 Wire Umbrella Type Carotid Artery Filter - Dcgi Approved , Embolic Protection Devices Based On Filter Technology/Mechanism - Us Fda Approved , Embolic Protection Devices Based On Filter Technology/Mechanism - Dcgi Approved , Embolic Protection Devices With Distal Balloon Occlusive Techonology - Us Fda Approved , Embolic Protection Devices With Distal Balloon Occlusive Techonology-Ce Approved , Embolic Protection Devices With Distal Balloon Occlusive Techonology - Dcgi Approved , Distal Embolic Protection Device - Us Fda Approved ? Should Be Made Of Polyurethane With Radio-Opaque Nitinol Loop ?Should Be Suspended On The .014” Wire With A Suspension Arm. ?Should Not Occlude Flow While In Placement, Should Be Rapid Exchange Type ? Should Be Compatible With A 6 F Guiding Catheter (0.066” Id) Should Allow Optimal Filtration In Vessels 3.5 - 5.5 Mm Size , Distal Embolic Protection Device – Ce/Dcgi Approved ? Should Be Made Of Polyurethane With Radio-Opaque Nitinol Loop ?Should Be Suspended On The .014” Wire With A Suspension Arm. ?Should Not Occlude Flow While In Placement, Should Be Rapid Exchange Type ? Should Be Compatible With A 6 F Guiding Catheter (0.066” Id) Should Allow Optimal Filtration In Vessels 3.5 - 5.5 Mm Size , Peripheral Cutting Balloon Catheter - Us Fda Approved ? Should Be Available In Balloon Od Of 3-6 Mm ? Should Have Up To 15 Mm Or Up To 20 Mm Working Length , Peripheral Cutting Balloon Catheter – Ce/Dcgi Approved ? Should Be Available In Balloon Od Of 3-6 Mm ? Should Have Up To 15 Mm Or Up To 20 Mm Working Length Catheter Shaft Length Should Be Up To 140 Cm , Balloon In Balloon Catheter (Bib)- Dcgi With Us Fda /Ce Approved , Plaque Modification Device For Highly Calcified Lesions - Dcgi With Us Fda / Ce Approved ? Available In The Sizes And Length ? Should Be Along With Support Accessories ? Super High Pressure Balloon Dialation Catheter Non Compliant Rbp -35 Bar Must Be Twin Layer In Balloon With Low Lesion Entry Profile”0.16” , Ivc Filter – Us Fda Approved ?For Optimal Filtration Of Ivc Diameter Of Up To 40 Mm ?Made Of Either Nitinol Or Stainless Steel ?Catheter Carrier System Inner Diameter Should Be Of Maximum 12 F ?It Should Be Possible To Insert From Either Jugular Or Femoral Access Should Be For Permanent Use , Ivc Filter – Ce Approved ?For Optimal Filtration Of Ivc Diameter Of Up To 40 Mm ?Made Of Either Nitinol Or Stainless Steel ?Catheter Carrier System Inner Diameter Should Be Of Maximum 12 F ?It Should Be Possible To Insert From Either Jugular Or Femoral Access Should Be For Permanent Use , Ivc Filter – Dcgiapproved ?For Optimal Filtration Of Ivc Diameter Of Up To 40 Mm ?Made Of Either Nitinol Or Stainless Steel ?Catheter Carrier System Inner Diameter Should Be Of Maximum 12 F ?It Should Be Possible To Insert From Either Jugular Or Femoral Access Should Be For Permanent Use , Endovascular Stent Graft Device For Treatment Of Thoracic Aortic Aneurysms And Dissections - Us Fda Approved ?Device Should Be With Proximal Barbs, With Or Without Distal Bare Spring Configuration, And Should Be Tapered Or Non – Tapered. ?The Aortic Device Should Be Available In Any One Or More Of The Following Sizes: Od 26-44Mm; Length 4-24 Cm. The Device Should Be Able To Be Advanced On Up To 24 Fr Shaft Size. The Manufacturer Should Agree To Supply The Size Customized To The Patient’S Anatomy Based On Ct Angiography , Endovascular Stent Graft Device For Treatment Of Thoracic Aortic Aneurysms And Dissections – Ce/Dcgi Approved ?Device Should Be With Proximal Barbs, With Or Without Distal Bare Spring Configuration, And Should Be Tapered Or Non – Tapered. ?The Aortic Device Should Be Available In Any One Or More Of The Following Sizes: Od 26-44Mm; Length 4-24 Cm. The Device Should Be Able To Be Advanced On Up To 24 Fr Shaft Size. The Manufacturer Should Agree To Supply The Size Customized To The Patient’S Anatomy Based On Ct Angiography , Endovascular Stent Graft Device For Treatment Of Abdominal Aortic Aneurysms – Usfda Approved ?Device Should Be With Proximal Barbs, With Or Without Distal Bare Spring Configuration, And Should Be Either Tapered Or Non – Tapered ?Devices With Trans-Renal Or Suprarenal Fixation Should Be Quoted. ?The Aortic Device Should Be Available In Any 1 Or More Of The Following Sizes: Od 12-44Mm; Length 4-24 Cm. The Device Should Be Able To Be Advanced On Up To 24 Fr Shaft Size. ?The Limb Extensions Of The Main Device For Abdominal Aortic Applications Should Be Available In 12-22 Mm Diameter, With Or Without Flared Ends And Up To 12 Cm In Length The Manufacturer Should Agree To Supply The Size Customized To The Patient’S Anatomy Based On Ct Angiography , Endovascular Stent Graft Device For Treatment Of Abdominal Aortic Aneurysms – Ce/Dcgi Approved ?Device Should Be With Proximal Barbs, With Or Without Distal Bare Spring Configuration, And Should Be Either Tapered Or Non – Tapered ?Devices With Trans-Renal Or Suprarenal Fixation Should Be Quoted. ?The Aortic Device Should Be Available In Any 1 Or More Of The Following Sizes: Od 12-44Mm; Length 4-24 Cm. The Device Should Be Able To Be Advanced On Up To 24 Fr Shaft Size. ?The Limb Extensions Of The Main Device For Abdominal Aortic Applications Should Be Available In 12-22 Mm Diameter, With Or Without Flared Ends And Up To 12 Cm In Length The Manufacturer Should Agree To Supply The Size Customized To The Patient’S Anatomy Based On Ct Angiography , Renal Denervation Device For Rf Ablation Of Renal – Ce / Us Fda Approved , Renal Denervation Device For Rf Ablation Of Renal –Dcgiapproved , C.P. Stent Covered – Ce Approved Should Be Balloon Mounted. , C.P. Stent Covered – Us Fda Approved , C.P. Stent Covered – Dcgiapproved , Amplatzer Plug – Ce Approved , Amplatzer Plug – Us Fda Approved , Amplatzer Plug – Dcgiapproved , Snare For Periferal Use – Us Fda/Ceapproved , Snare For Periferal Use – Dcgiapproved , Long Artrial Sheeth 6F/7F/8F Length >=90 Cm – Braided –Us Fda/ Ce Approved , Long Artrial Sheeth 6F/7F/8F Length >=90 Cm – Braided – Dcgiapproved , Long Artrial Sheeth 6F/7F/8F Length >=90 Cm – Un Braided– Us Fda/ Ce Approved , Long Artrial Sheeth 6F/7F/8F Length >=90 Cm – Un Braided– Dcgiapproved , Long Artrial Sheeth Upto 90 Cm - Braided – Us Fda/ Ce Approved , Long Artrial Sheeth Upto 90 Cm - Braided – Dcgiapproved , Long Artrial Sheeth Upto 90 Cm - Unbraided – Us Fda/ Ce Approved , Long Artrial Sheeth Upto 90 Cm - Unbraided – Dcgiapproved , Cross – Over Sheeth - Braided – Us Fda/ Ce Approved , Cross – Over Sheeth - Braided – Dcgiapproved , Cross – Over Sheeth - Unbraided – Us Fda/ Ce Approved , Cross – Over Sheeth - Unbraided – Dcgiapproved , Visceral Type Catheter – Us Fda/ Ce Approved , Visceral Type Catheter – Dcgiapproved , Head Hunter Type Catheter – Us Fda/ Ce Approved , Head Hunter Type Catheter – Dcgiapproved , Vtk Type Catheter – Us Fda/ Ce Approved , Vtk Type Catheter – Dcgi Approved , Simmons Type Catheter – Us Fda/ Ce Approved , Simmons Type Catheter – Dcgiapproved , Cobra Type Catheter – Us Fda/ Ce Approved , Abdominal Stent Graft For Treating Aortic Aneurysm– Us Fda Approved , Abdominal Stent Graft For Treating Aortic Aneurysm– Ce Approved , Abdominal Stent Graft For Treating Aortic Aneurysm– Dcgi Approved , Thorosic Stent Graft For Treating Thorasic Aneurysm And Thorosic Dissection – Us Fda Approved , Thorosic Stent Graft For Treating Thorosic Aneurysm And Thorosic Dissection– Ce Approved , Thorosic Stent Graft For Treating Thorosic Aneurysm And Thorosic Dissection– Dcgi Approved , Covered Aortic Stent Balloon Mounted - Us Fda Approved , Covered Aortic Stent Balloon Mounted – Ce Approved , Covered Aortic Stent Balloon Mounted (Andra Stent Type) – Dcgi Approved , Non-Covered Aortic Stent Balloon Mounted - Us Fda Approved , Non-Covered Aortic Stent Balloon Mounted – Ce Approved , Non-Covered Aortic Stent Balloon Mounted(Endra Stent Type)– Dcgi Approved , Asd Occluders, -Percutaneous Transcatheter Closure For Non-Surgical Closure Of Atrial Septal Defect. Device Should Be Self-Expandable Double Disc Made Up Of Soft Nitinol Wire Mesh That Is Shaped Into Two Flat Discs And A Waist Between. Polyester Fabric Sewn Into Each Disc And The Waist To Promote Occlusion And Tissue In Growth. The Matellic Material Should Be Intaglio Treated To Improve Biocompatibilty And Reduce Nickel (Ni) Leaching. Device Should Be Mr Conditional Upto 3Tesla Or Less. Device Should Be Backed By Strong Clinical Study With Proven Success Rate For Pediatrics And Adults. – Usfda Approved Sizes - 4Mm, 5Mm, 6Mm, 7Mm, 8Mm, 9Mm, 10Mm, 11Mm, 12Mm, 13Mm, 14Mm, 15Mm, 16Mm, 17Mm, 18Mm, 19Mm, 20Mm, 22Mm, 24Mm, 26Mm, 28Mm, 30Mm, 32Mm, 34Mm, 36Mm, 38Mm, And,40Mm , Asd - Multi Fenestrated (Cribriform) Occluders, Percutaneous Transcatheter Closure For Non-Surgical Closure Of Atrial Septal Defect. Device Should Be Self-Expandable Double Disc Made Up Of Soft Nitinol Wire Mesh That Is Shaped Into Two Flat Discs And A Very Thin Waist Of 3Mm. Device Should Have Matched Disc Diameters To Maximise The Coverage Of Multiple Fenestrations. Polyester Fabric Sewn Into Each Disc Promote Occlusion And Tissue In Growth. The Matellic Material Should Be Intaglio Treated To Improve Biocompatibilty And Reduce Nickel (Ni) Leaching. Device Should Be Mr Conditional Upto 3Tesla Or Less. Device Should Be Backed By Strong Clinical Study With Proven Success Rate For Pediatrics And Adults. Usfda Approved Sizes - 18Mm, 25Mm, 30Mm, 35Mm, And 40Mm , Pda Occluders, Percutaneous Transcatheter Closure For Non-Surgical Closure Of Patent Ductus Arteriosus. Device Should Be Self- Expandable Made Up Of Soft Nitinol Wire Mesh, Which Has Been Heated And Set To Expand Into T-Shape. Retention Skirt Design Should Provide Secure Positioning With The Ductus And Reduce Embolization. Polyester Fabric Sewn Into The Device To Promote Occlusion And Tissue In Growth. The Matellic Material Should Be Intaglio Treated To Improve Biocompatibilty And Reduce Nickel (Ni) Leaching. Device Should Be Mr Conditional Upto 3Tesla Or Less. Device Should Be Backed By Strong Clinical Study With Proven Success Rate For Pediatrics And Adults.Usfda Approved Sizes - 0405Mm, 0406Mm, 0608Mm, 0810Mm, 1012Mm, 1214Mm, And 1416Mm , Pda Occluder With Double Disc, Percutaneous Transcatheter Closure For Non-Surgical Closure Of Moderate Patent Ductus Arteriosus. Device Should Be Self-Expandable Made Up Of Soft Nitinol Compliant-Multilayered Mesh And Dual Articulating Discs That Provide High Conformability To Treat Maximum Types Of Pda. Device Should Have Symmetric Design That Offers Procedural Flexibility To Choose Antegrade Or Retrograde Approach. Device Should Have Fabric-Free Technology That Allows For Delivery Through Low-Profile Catheter While Maintaining High Rate Of Occlusion. The Matellic Material Should Be Intaglio Treated To Improve Biocompatibilty And Reduce Nickel (Ni) Leaching. Device Should Be Mr Conditional Upto 3Tesla Or Less. Device Should Be Backed By Strong Clinical Study With Proven Success Rate For Pediatrics And Adults. Usfda Approved Sizes - 0304Mm, 0306Mm, 0404Mm, 0406Mm, 0504Mm, 0506Mm, 0604Mm, And 0606Mm , Pda Occluder With Double Disc (For Neonates), Percutaneous Transcatheter Closure For Non-Surgical Closure Of Small Patent Ductus Arteriosus In Neonates While Minimizing Protrusion. Device Should Be Self-Expandable Made Up Of Soft Nitinol Compliant-Multilayered Mesh. Device Should Have Low-Profile Dual Articulating Discs That Provide High Conformability To Treat Maximum Types Of Small Pdas. Device Should Have Symmetric Design That Offers Procedural Flexibility To Choose Antegrade Or Retrograde Approach. Device Must Containt Tightly Woven, Single Layer Mesh Development To Minimize Residual Shunt After Placement. Device Should Be Preloaded On Delivery Cable And Comes With A Special Low-Profile Delivery Catheter Of 4Fr. The Matellic Material Should Be Intaglio Treated To Improve Biocompatibilty And Reduce Nickel (Ni) Leaching. Device Should Be Mr Conditional Upto 3Tesla Or Less. Device Should Be Backed By Strong Clinical Study With Proven Success Rate For Pediatrics And Adults.Usfda Approved Sizes - 0302Mm, 0304Mm, 0306Mm, 0402Mm, 0404Mm, 0406Mm, 0502Mm, 0504Mm, And, 0506Mm , Muscular Vsd Occluder, Is A Percutaenous Transcatheter Closure For Non-Surgical Closure Of A Ventricular Septal Defect. The Occluder Is Designed To Close Complex Muscular Vsds In Patients To Be At High Risk Of Surgical Repair. The Device Should Be Self-Expandable Symmetric Double Disc Made From A Soft Nitinol Mesh. The Device Waist Should Be Self-Centered And Fill The Defect. The Device Should Be Filled With Polyester Material That Promotes Occlusion And Tissue In Growth. The Waist Length Should Be 7Mm To Accomodate The Thickness Of Muscular Ventricular Septal Wall. Symmetric Design Should Allow Both Antegrade And Retrograde Approach. The Matellic Material Should Be Intaglio Treated To Improve Biocompatibilty And Reduce Nickel (Ni) Leaching. Device Should Be Mr Conditional Upto 3Tesla Or Less. Device Should Be Backed By Strong Clinical Study With Proven Success Rate For Pediatrics And Adults.Usfda Approved Sizes - 4Mm, 6Mm, 8Mm, 10Mm, 12Mm, 14Mm, 16Mm, And 18Mm , P.I. Muscular Vsd Occluder, Is A Percutaenous Transcatheter Closure For Non-Surgical Closure Of A Ventricular Septal Defect. The Occluder Is Designed To Close Complex Muscular Vsds In Patients To Be At High Risk Post Infarction Caused Due To Mi. The Device Should Be Self-Expandable Symmetric Double Disc Made From A Soft Nitinol Mesh. The Device Waist Should Be Self-Centered And Fill The Defect. The Device Should Be Filled With Polyester Material That Promotes Occlusion And Tissue In Growth. The Waist Length Should Be 10Mm To Accomodate The Thickness Of Apical Ventricular Septal Wall. Symmetric Design Should Allow Both Antegrade And Retrograde Approach. The Matellic Material Should Be Intaglio Treated To Improve Biocompatibilty And Reduce Nickel (Ni) Leaching. Device Should Be Mr Conditional Upto 3Tesla Or Less. Device Should Be Backed By Strong Clinical Study With Proven Success Rate For Pediatrics And Adults. Usfda Approved Sizes - 16Mm, 18Mm, 20Mm, 22Mm, And 24Mm , Membranous Vsd Occluder, Is A Percutaneous Transcatheter Closure For Non-Surgical Closure Of Peri-Membranous Ventricular Septal Defect. It Should Be Non-Concentric Design Allows For Placement That Avoida Interference With Aortic Or Av Valves. The Device Should Be Made Up Of Soft Nitinol Meshwith Interwoven Polyester To Promote Occlusion And Tissue In-Growth. The Device Should Be Delievered Using A Pusher Catheter From Venous Approach. The Matellic Material Should Be Intaglio Treated To Improve Biocompatibilty And Reduce Nickel (Ni) Leaching. Device Should Be Mr Conditional Upto 3Tesla Or Less. Device Should Be Backed By Strong Clinical Study With Proven Success Rate For Pediatrics And Adults.Usfda Approved Sizes - 4Mm, 5Mm, 6Mm, 7Mm, 8Mm, 9Mm, 10Mm, 11Mm, 12Mm, 13Mm, 14Mm, 15Mm, 16Mm, 17Mm, And 18Mm , Pfo Occluder, Is A Percutaneous Transcatheter Closure For Non-Surgical Closure Of Patent Foramen Ovale. Device Should Be Self- Expandable Double Disc Made Up Of Soft Nitinol Wire Mesh That Is Shaped Into Two Flat Discs And A Very Thin Waist Of 3Mm. Device Should Have Matched Disc Diameters To Maximise The Coverage Of Foramen Ovale. Polyester Fabric Sewn Into Each Disc Promote Occlusion And Tissue In Growth. The Matellic Material Should Be Intaglio Treated To Improve Biocompatibilty And Reduce Nickel (Ni) Leaching. Device Should Be Mr Conditional Upto 3Tesla Or Less. Device Should Be Backed By Strong Clinical Study With Proven Success Rate For Pediatrics And Adults. Usfda Approved Sizes - 18Mm, 25Mm, 30Mm, And 35Mm , Atv, Special Delivery System Designed For Asd And Pfo Cases. This Delivery System Comes With An Ultra-Flexible Tip For Better Positioning Of The Device. Enhanced Delivery Cable Improves The Assessment Of Device Final Position Prior To Cable Release. It Is Designed For No Compromise On Torque Strength, Sheath Diameter And Pushability.Usfda Approved Sizes - 6Fr, 7Fr, 8Fr, 9Fr, 10Fr, 12Fr, And 13Fr , Itv, Special Delivery System With Delivery Cable Angeled At 45°. Used For Asd And Pfo Cases Usfda Approved Sizes - 6Fr, 7Fr, 8Fr, 9Fr, 10Fr, 12Fr, And 13Fr , Itv, Special Delivery System With Delivery Cable Angeled At 180°. Used For Vsd And Pda Cases Usfda Approved Sizes - 5Fr, 6Fr, 7Fr, 8Fr, And 9Fr , Tvlp, Special Delivery System For Pda Occluder With Double Disc Angeled At 90° (Ado Ii) Usfda Approved Sizes - 4Fr And 5Fr , Tvlpc, Special Delivery Catheter For Speical Sizes Of Pda Occluder With Double Disc Angeled At 90° (Piccolo Device) Usfda Approved Sizes - 4Fr , Itvp, Special Delivery System With Pusher Catheter Angeled At 180°Usfdaapproved Sizes - 7Fr, 8Fr And 9Fr , Laa Closure, Is A Percutaneous Transcatheter Closure For Non-Surgical Closure Of Left Atrial Appendage. Having An Innovative Design Of Cylindrical Plug Attached With The Retention Skirt. Cylindrical Plug Shaped Head Is Designed To Trap Trabeculations. Device Should Be Preloaded On The Delivery Cable With Delivery Profile Of 12Fr To 14Fr. Devide Should Be Made Up Of Soft Woven Nitinol Mesh. The Matellic Material Should Be Intaglio Treated To Improve Biocompatibilty And Reduce Nickel (Ni) Leaching. Device Should Be Mr Conditional Upto 3Tesla Or Less. Device Should Be Backed By Strong Clinical Study With Proven Success Rate For Pediatrics And Adults. Usfda Approvedsizes - 16Mm, 18Mm, 20Mm, 22Mm, 25Mm, 28Mm, 31Mm, And, 34Mm , Tv, Special Delivery System With Dual Angeled Sheath At 45° X 45° With The Usable Length Of 80Cm Specially Designed For Laa Occludersusfda Approvedsize - 12Fr. And 14Fr. , Sizing Balloon With A Triple Lumen Balloon Catheter With Three Radiopaque Marker Bands Located Inside The Balloon To Allow For Radiographic Measurement. The Centre Of The Balloon Should Contains A Pair Of Marker Bands 0.4Mm Apart For Corrent Balloon Alignment While Measuing The Defect And One Marker Band 15Mm Proximal Of The Pair.Usfda Approvedsize - 18Mm, 24Mm. And 34Mm , Pvl Occluder Is A Percutaneour Transcatheter Closure Of Para Valvular Leak Which Is A Serious Complication Of Valve Replacement Surgery. Devide Should Be Made Up Of Soft Woven Muti-Layered Nitinol Mesh Designed To Increase Density And Provide Rapid Occlusion. Low Profile 4Fr To 7Fr Sheath To Facilitate Defect Crossing. Oblonged Shape To Improve Wall Apposition And Enhance Stability In Pvl. Device Orientation Should Be Defined Through A Small Platinum Marker On The Distal Rim. The Matellic Material Should Be Intaglio Treated To Improve Biocompatibilty And Reduce Nickel (Ni) Leaching. Device Should Be Mr Conditional Upto 3Tesla Or Less. Device Should Be Backed By Strong Clinical Study With Proven Success Rate For Pediatrics And Adults.Usfda Approved Size - 0204Mm, 0306Mm, 0408Mm, 0310Mm, 0510Mm, 0312Mm, 0512Mm, 0314Mm, And 0514Mm. , Pda Closure Devices Without Delivery System — Ce/Dcgi Approved Available In All The Sizes • Hat-Shaped Designed Pda Occluder Device • Platinum Coating Of =25 ? Using Nano Fusion Technology • Polypropylene Fabric Sewn Inside The Occluder Device • Extended Retention Portion Provides Proper Positioning Of The Device In The Ductus Arteriosus • Available Sizes- 4/6, 6/8, 8/10, 10/12, 12/14, 14/16, 16/18, 18/20Mm , Delivery Sheath For Pda Closure Device — Ce /Dcgi Approved , Pda Closure Devices With Delivery System – Ce Approved/ Dgci Approved ·Available In All The Sizes• Hat-Shaped Designed Pda Occluder Device • Platinum Coating Of =25 ? Using Nano Fusion Technology • Polypropylene Fabric Sewn Inside The Occluder Device • Extended Retention Portion Provides Proper Positioning Of The Device In The Ductus Arteriosus • Available Sizes- 4/6, 6/8, 8/10, 10/12, 12/14, 14/16, 16/18, 18/20Mm , Vsd Closure Devices Without Delivery System — Ce/Dcgi Approved• Self-Expanding, Self-Centering Double-Disc Device • Platinum Coating Of =25 ? Using Nano Fusion Technology • Polypropylene Fabric Sewn Inside The Occluder Device • Available Sizes- 4-4, 4-10, 6-4, 6-10, 8-4, 8-10, 10-4, 10-10, 12-4, 12-10Mm • Certificates- Ce & Dcgi Approved • Shelf Life- 3 Years , Delivery Sheath For Vsd Closure Device — Ce Approved , Vsd Closure Devices With Delivery System — Ce/Dcgi Approved• Self-Expanding, Self-Centering Double-Disc Device • Platinum Coating Of =25 ? Using Nano Fusion Technology • Polypropylene Fabric Sewn Inside The Occluder Device • Available Sizes- 4-4, 4-10, 6-4, 6-10, 8-4, 8-10, 10-4, 10-10, 12-4, 12-10Mm • Delivery Cable Available Along With Cable Sheath In Individual Packaging • Soft And Flexible Distal End Of Delivery Cable To Navigate In Various Anatomies • Availability Of ‘S-Shaped’ Sheath • Certificates- Ce & Dcgi Approved • Shelf Life- 3 Years , Valve • Self-Expanding Frame, Supra-Annular Valve Design, Bovine Pericardial Valve • Proprietary Anti-Calcification Tissue Treatment • Extended Internal Sealing Skirt • Two Rows Of Radio-Opaque Markers On The Frame • Varying Radial Force Frame – Optimal Forces At All 3 Parts Of The Frame • Available In Three Sizes Of 22, 26, And 30 Mm, Which Cover The Treatable Annular Diameter Range From 17 To 27 Mm • Post Dilatation Limits Of Valve Frame Equal To Approved Annulus Diameter Limit • Cell Size Of = 15 French • Less Metal At The Inflow Section • Certificates- Ce & Dcgi Approved , Pfo Closure Devices With Delivery System — Ce/Dcgi Approved• Self-Expanding, Self-Centering Double-Disc Occluder • Platinum Coating Of =25 ? Using Nano Fusion Technology • Polypropylene Fabric Sewn Inside The Occluder Device • Available In 6 Sizes, 5 Sizes (18/18, 25/18, 25/25, 30/25, 30/30 Mm) Which Are 8F Compatible And 1 Size (35/25 Mm) Which Is 9F Compatible • 6F Delivery Cable Available In Individual Packaging • Certificates- Ce & Dcgi Approved • Shelf Life- 3 Years , Pfo Closure Devices Without Delivery System — Ce/Dcgi Approved• Self-Expanding, Self-Centering Double-Disc Occluder • Platinum Coating Of =25 ? Using Nano Fusion Technology • Polypropylene Fabric Sewn Inside The Occluder Device • Available In 6 Sizes, 5 Sizes (18/18, 25/18, 25/25, 30/25, 30/30 Mm) Which Are 8F Compatible And 1 Size (35/25 Mm) Which Is 9F Compatible • Certificates- Ce & Dcgi Approved • Shelf Life- 3 Years , Delivery Sheath For Pfo Closure Device — Ce/Dcgi Approved •Compatible With The Device Approved , Asd Closure Devices Without Delivery System– Ce Approved/Dcgi Approved ·Approved For Pediatric/Adult Use • Self-Expanding, Self-Centering Double-Disc Device • Platinum Coating Of =25 ? Using Nano Fusion Technology • Polypropylene Fabric Sewn Inside The Occluder Device • Available In Sizes- 8, 10, 12, 14, 16, 18, 20, 22, 24, 26, 28, 30, 32, 34, 36, 38 & 40Mm , Asd Closure Devices With Delivery System – Ce Approved/Dcgi Approved ·Approved For Pediatric/Adult Use ·Self-Centering, Detachable Device With Delivery Cable • Self-Expanding, Self-Centering Double-Disc Device • Platinum Coating Of =25 ? Using Nano Fusion Technology • Polypropylene Fabric Sewn Inside The Occluder Device • Available In Sizes- 8, 10, 12, 14, 16, 18, 20, 22, 24, 26, 28, 30, 32, 34, 36, 38 & 40Mm And Delivery Sheath , Delivery Sheath For Asd Closure Device - Ce/Dcgi Approved , Delivery Cable For Asd/Vsd/Pda/Pfo Devices - Ce/Dcgi Approved , Left Atrial Appendage Closure Device Us Fda Approved , Occlusion Balloon-Dcgi With Us Fda / Ce Approved ?Shouldbe Soft Compliant Balloon Material With Radio-Opaque Markers At Both Distal And Proximal End Of Balloon ?Should Be 14Fr / 16Fr Sheath And 0.035”/0.038” Wire Compatible. Should Be Available In Diameter 20 Mm/ 27 Mm / 33 Mm And 40 Mm. , Pda Coils Made Of Steel/ Nitinol/Platinum - Us Fda Approved ? 0.035, 0.038 Inches Sizes Ranging From 2 X 2 To 15 X 15 , Pda Coils Made Of Steel/ Nitinol/Platinum - Ce Approved ? 0.035, 0.038 Inches Sizes Ranging From 2 X 2 To 15 X 15 , Pda Coils Made Of Steel/ Nitinol/Platinum – Dcgi Approved ? 0.035, 0.038 Inches Sizes Ranging From 2 X 2 To 15 X 15 , 0.052 Inch Pda Coils Made Of Steel/ Nitinol/Platinum - Us Fda Approved Sizes Ranging From 2 X 2 To 15 X 15 , 0.052 Inch Pda Coils Made Of Steel/ Nitinol/Platinum - Ce Approved Sizes Ranging From 2 X 2 To 15 X 15 , 0.052 Inch Pda Coils Made Of Steel/ Nitinol/Platinum – Dcgi Approved Sizes Ranging From 2 X 2 To 15 X 15 , Embolisation Coils (0.018 Inch) - Us Fda Approved Sizes Ranging From 2 X 2 To 15 X 15 , Embolisation Coils (0.018 Inch) - Ce Approved Sizes Ranging From 2 X 2 To 15 X 15 , Embolisation Coils (0.018 Inch) – Dcgi Approved Sizes Ranging From 2 X 2 To 15 X 15 , Embolisation Coils (0.035 Inch) - Us Fda Approved Sizes Ranging From 2 X 2 To 15 X 15 , Embolisation Coils (0.035 Inch) - Ce Approved Sizes Ranging From 2 X 2 To 15 X 15 , Embolisation Coils (0.035 Inch) – Dcgi Approved Sizes Ranging From 2 X 2 To 15 X 15 , Embolisation Coils (0.052 Inch) - Us Fda Approved Sizes Ranging From 2 X 2 To 15 X 15 , Embolisation Coils (0.052 Inch) - Ce Approved Sizes Ranging From 2 X 2 To 15 X 15 , Embolisation Coils (0.052 Inch) –Dcgi Approved Sizes Ranging From 2 X 2 To 15 X 15 , Park Blade Septectomy Catheter - Us Fda Approved , Park Blade Septectomy Catheter - Ce Approved , Park Blade Septectomy Catheter – Dcgi Approved , Embolisation Coils - Us Fda Approved ?Should Be 0.014/0.018” Compatible ?Should Be Made Of Platinum With Synthetic Fibres ?Should Be Non Tapering/Straight ?Should Be Mr Compatible ?Should Be Available In Any Or The Following Diameters: 2-10 Mm Should Be Of Various Lengths; The Length Of The Coil At Each Diameter Should Be Stated , Embolisation Coils - Ce Approved ?Should Be 0.014/0.018” Compatible ?Should Be Made Of Platinum With Synthetic Fibres ?Should Be Non Tapering/Straight ?Should Be Mr Compatible ?Should Be Available In Any Or The Following Diameters: 2-10 Mm Should Be Of Various Lengths; The Length Of The Coil At Each Diameter Should Be Stated , Embolisation Coils – Dcgi Approved ?Should Be 0.014/0.018” Compatible ?Should Be Made Of Platinum With Synthetic Fibres ?Should Be Non Tapering/Straight ?Should Be Mr Compatible ?Should Be Available In Any Or The Following Diameters: 2-10 Mm Should Be Of Various Lengths; The Length Of The Coil At Each Diameter Should Be Stated , Embolisation Coils - Usfda Approved ?Should Be 0.035/0.038” Compatible ?Should Be Made Of Platinum With Synthetic Fibres ?Should Be Mr Compatible ?Should Be Tapering From A Larger To A Smaller End ?Should Be Available In Following Sizes: Diameters: 5-10 Mm And Length 2-15 Cm The Diameter To Tapered End For Tapering Type Coil Should Be Mentioned , Embolisation Coils - Ce Approved ?Should Be 0.035/0.038” Compatible ?Should Be Made Of Platinum With Synthetic Fibres ?Should Be Mr Compatible ?Should Be Tapering From A Larger To A Smaller End ?Should Be Available In Following Sizes: Diameters: 5-10 Mm And Length 2-15 Cm The Diameter To Tapered End For Tapering Type Coil Should Be Mentioned , Embolisation Coils – Dcgi Approved ?Should Be 0.035/0.038” Compatible ?Should Be Made Of Platinum With Synthetic Fibres ?Should Be Mr Compatible ?Should Be Tapering From A Larger To A Smaller End ?Should Be Available In Following Sizes: Diameters: 5-10 Mm And Length 2-15 Cm The Diameter To Tapered End For Tapering Type Coil Should Be Mentioned , Embolisation Coils - Us Fda Approved ? Should Be 0.035/0.038/0.052” Compatible ? Should Be Non Tapering/Straight ? Should Be Made Of Stainless Steel With Synthetic Fibres Should Be Available In The Following Sizes: Diameters: 3-15 Mm And Length 2-15 Cm , Embolisation Coils - Ce Approved ? Should Be 0.035/0.038/0.052” Compatible ? Should Be Non Tapering/Straight ? Should Be Made Of Stainless Steel With Synthetic Fibres Should Be Available In The Following Sizes: Diameters: 3-15 Mm And Length 2-15 Cm , Embolisation Coils – Dcgi Approved ? Should Be 0.035/0.038/0.052” Compatible ? Should Be Non Tapering/Straight ? Should Be Made Of Stainless Steel With Synthetic Fibres Should Be Available In The Following Sizes: Diameters: 3-15 Mm And Length 2-15 Cm , Coil Pusher Wire For 0.014/0.018” Coils, Compatible With The Quoted Micro Catheters - Us Fda Approved , Coil Pusher Wire For 0.014/0.018” Coils, Compatible With The Quoted Micro Catheters - Ce Approved , Coil Pusher Wire For 0.014/0.018” Coils, Compatible With The Quoted Microcatheters – Dcgi Approved , Gelfoam Sheet For Vascular Embollization - Us Fda Approved , Gelfoam Sheet For Vascular Embollization - Ce Approved , Gelfoam Sheet For Vascular Embollization – Dcgi Approved , Liquid Embolization System Available In Various Sizes (2Ml, 3Ml & 6Ml)– Us Fda/ Ce / Dcgi Approved , Pbmv Balloon (All Types And Sizes) With Accessories – Us Fda Approved , Pbmv Balloon (All Types And Sizes) With Accessories – Ce Approved , Pbmv Balloon (All Types And Sizes) With Accessories – Dcgi Approved , Pbmv Balloon (All Types And Sizes) Without Accessories – Us Fda Approved , Pbmv Balloon (All Types And Sizes) Without Accessories –Ce Approved , Pbmv Balloon (All Types And Sizes) Without Accessories –Dcgi Approved , Accessories Only For The Above Pbmv Balloons – Us Fda Approved , Accessories Only For The Above Pbmv Balloons – Ce Approved , Accessories Only For The Above Pbmv Balloons – Dcgi Approved , Pbmv Balloon With Side Safety / Microholes With Accessories– Us Fda Approved , Pbmv Balloon With Side Safety / Microholes With Accessories– Ce Approved , Pbmv Balloon With Side Safety / Microholes With Accessories– Dcgiapproved , Pbmv Balloon With Side Safety / Microholes Without Accessories – Us Fda Approved , Pbmv Balloon With Side Safety/ Microholes Without Accessories– Ce Approved , Pbmv Balloon With Side Safety/ Microholes Without Accessories– Dcgiapproved , Ptmc Balloon With Hole In Balloon – Us Fda Approved , Ptmc Balloon With Hole In Balloon – Ce Approved , Ptmc Balloon With Hole In Balloon – Dcgi Approved , Ptmc Balloon (With Hole In Balloon) With All Acessories- Us Fda Approved , Ptmc Balloon (With Hole In Balloon) With All Acessories- Ce Approved , Ptmc Balloon (With Hole In Balloon) With All Acessories- Dcgi Approved , Tavi (|Trans Catheter Aortic Valve Replacement System With All Required Accessories) - – Dcgi With Us Fda /Ce Approved , Tavi (|Trans Catheter Aortic Valve Replacement System With All Required Accessories)- Ce Approved , Tavi (|Trans Catheter Aortic Valve Replacement System With All Required Accessories) – Dcgi Approved , Self Expandable Trans Catheter Aortic Valve Replacement System With All Required Accessories –Us Fda /Ce Approved ?Should Be Inall Sizes Diameter Anti – Calcification And Chemical Dehydration Thin & Strong Low Profile With Delivery System. , Self Expandable Trans Catheter Aortic Valve Replacement System With All Required Accessories – Dcgi Approved ?Should Be Inall Sizes Diameter Anti – Calcification And Chemical Dehydration Thin & Strong Low Profile With Delivery System. , Self Expandable Trans Catheter Tricuspidvalve Replacement System With All Required Accessories – Dcgi With Us Fda /Ce Approved ?Should Be Inall Sizes Diameter Anti – Calcification And Chemical Dehydration Thin & Strong Low Profile With Delivery System. , Trans Catheter Tricuspid Valve Replacement System With All Required Accessories – Dcgi With Us Fda /Ce Approved ?Should Be Inall Sizes Diameter Anti – Calcification And Chemical Dehydration Thin & Strong Low Profile With Delivery System. , Mitra-Clip (Trans Catheter Mitral Valve Clip System) - Dcgi With Us Fda / Ce Approved , Mitra-Valve (Trans Catheter Mitral Valve) - Dcgi , Tavi (|Trans Catheter Aortic Valve Replacement System With All Required Accessories)- Usfda Approved , Tavi (|Trans Catheter Aortic Valve Replacement System With All Required Accessories)- Ce Approved , Tavi (|Trans Catheter Aortic Valve Replacement System With All Required Accessories)- Dcgi Approved , Tavi Guide-Wire -Dcgi With Us Fda / Ce Approved ?Should Be Available In Diameter 0.035, Length 250-275 Cm, Should Have Spring Coil Ptfe Coating And Extra Small, Small & Large Curves. , Wire 0.018” Regular Length, Regular Shaft Stiffness - Us Fda Approved Floppy Tip, Straight / J Shaped Tip, 140-300Cm Long , Wire 0.018” Regular Length, Regular Shaft Stiffness - Ce Approved Floppy Tip, Straight / J Shaped Tip, 140-300Cm Long , Wire 0.018” Regular Length, Regular Shaft Stiffness – Dcgi Approved Floppy Tip, Straight / J Shaped Tip, 140-300Cm Long , Wire 0.018” Regular Length, Extra – Stiff Shaft - Us Fda Approved Floppy Tip, Straight / J Shaped Tip, 140-300Cm Long , Wire 0.018” Regular Length, Extra – Stiff Shaft- Ce Approved Floppy Tip, Straight / J Shaped Tip, 140-300Cm Long , Wire 0.018” Regular Length, Extra – Stiff Shaft- Dcgi Approved Floppy Tip, Straight / J Shaped Tip, 140-300Cm Long , Valvoplasty Balloon Catheters - Us Fda Approved ?Varying Sizes And Diameters Approved For Pediatric/Adults Use , Valvoplasty Balloon Catheters - Ce Approved ?Varying Sizes And Diameters Approved For Pediatric/Adults Use , Valvoplasty Balloon Catheters – Dcgi Approved ?Varying Sizes And Diameters Approved For Pediatric/Adults Use , Special Balloon Catheter Compatible With 4 French Sheath - Us Fda Approved ?Compatible With 0.018 Inch Guide Wire Varying Length And Diamete , Special Balloon Catheter Compatible With 4 French Sheath - Ce Approved ?Compatible With 0.018 Inch Guide Wire Varying Length And Diameter , Special Balloon Catheter Compatible With 4 French Sheath – Dcgi Approved ?Compatible With 0.018 Inch Guide Wire Varying Length And Diameter , Special Pediatric Valvoplasty Balloon Catheters Compatible With 4 French Sheath - Us Fda Approved ?Compatible With 0.025 Inch Guide Wire Varying Length And Diameter , Special Pediatric Valvoplasty Balloon Catheters Compatible With 4 French Sheath - Ce Approved ?Compatible With 0.025 Inch Guide Wire Varying Length And Diameter , Special Pediatric Valvoplasty Balloon Catheters Compatible With 4 French Sheath – Dcgi Approved ?Compatible With 0.025 Inch Guide Wire Varying Length And Diameter , Valvoplasty Balloon Catheters (Sizes 10 – 22 Mm)- Us Fda Approved ?Approved For Pediatric/Adults Use ?Varying Length And Diameter Nominal Pressure < 4 Atm , Valvoplasty Balloon Catheters (Sizes 10 – 22 Mm)- Ce Approved ?Approved For Pediatric/Adults Use ?Varying Length And Diameter Nominal Pressure < 4 Atm , Valvoplasty Balloon Catheters (Sizes 10 – 22 Mm)- Dcgi Approved ?Approved For Pediatric/Adults Use ?Varying Length And Diameter Nominal Pressure < 4 Atm , Balloon Catheters (Sizes 10 – 22 Mm)- Us Fda Approved ?Approved For Pediatric/Adults Use ?Varying Length And Diameter Nominal Pressure < 8 Atm , Balloon Catheters (Sizes 10 – 22 Mm)- Ce Approved ?Approved For Pediatric/Adults Use ?Varying Length And Diameter Nominal Pressure < 8 Atm , Balloon Catheters (Sizes 10 – 22 Mm)- Dcgiapproved ?Approved For Pediatric/Adults Use ?Varying Length And Diameter Nominal Pressure < 8 Atm , Balloon In Balloon Catheters- Us Fda Approved Quote In All Sizes , Balloon In Balloon Catheters- Ce Approved Quote In All Sizes , Balloon In Balloon Catheters- Dcgiapproved Quote In All Sizes , Fogarty Embolectomy Catheter - Us Fda Approved ?4Fr./5Fr./6 Fr. Sizes Metal Rod At Tip Of The Catheter To Enable Angulations Up To 60 Degrees , Fogarty Embolectomy Catheter - Ce Approved ?4Fr./5Fr./6 Fr. Sizes Metal Rod At Tip Of The Catheter To Enable Angulations Up To 60 Degrees , Fogarty Embolectomy Catheter - Dcgi Approved ?4Fr./5Fr./6 Fr. Sizes Metal Rod At Tip Of The Catheter To Enable Angulations Up To 60 Degrees , Atrial Septostomy Catheter - Us Fda Approved 4Fr./5Fr./6 Fr. Sizes , Atrial Septostomy Catheter - Ce Approved 4Fr./5Fr./6 Fr. Sizes , Atrial Septostomy Catheter – Dcgi Approved 4Fr./5Fr./6 Fr. Sizes , Detachable Balloon - Us Fda Approved , Detachable Balloon - Ce Approved , Detachable Balloon – Dcgi Approved , Vascular Plugs – Us Fda Approved , Vascular Plugs – Ce Approved , Vascular Plugs Implantation– Dcgi With Us Fda / Ce Approved ?Should Be Titanium Nitride Coated. ?Should Have Ptfe Layers For Enhanced Occlusion. Should Be Available In Various Sizes (4.0- 24.0 Mm. , Valvoplasty Balloon Catheters Tyshek Type (All Sizes) - Us Fda Approved ?Approved For Pediatric/Adults Use ?Varying Length And Diameter Nominal Pressure < 4 Atm , Valvoplasty Balloon Catheters Tyshek Type (All Sizes)- Ce Approved ?Approved For Pediatric/Adults Use ?Varying Length And Diameter Nominal Pressure < 4 Atm , Aortic Stent Graft Abdominal -Dcgi With Us Fda / Ce Approved ?Endovascular Stent Graft Device For The Treatment Of Thoracic Aortic Aneurysm Or Dissection With Ptfe Dual Membrane Coating. With Metal Spine On The Greater Curvature To Avoid Stent Shortening And Provide Axial Support. , A U I Stent Graft Systemdcgi With Us Fda / Ce Approved ?Specifically Designed For Treatment Of Endovascular Abdominal Aortic Aneurysm A Self – Expandable Nitinol Stent With Ptfe Dual Membrane Coating & Offers Axial Support Preventing Foreshortening Of Stent. , Iliac Stent Graft -Dcgi With Us Fda / Ce Approved ?Endo-Vascular Stent Graft Device For The Treatment Iliac Aneurysm Or Dissection. With Proximal Bare Spring Configuration. It Should Be An Extension To Aaa Graft System , Multifunctional Occluder-Dcgi With Us Fda / Ce Approved ?For Occlusion Of Muscular Vsd Peri-Membranous Vsd, Rsov, Apex Window & Av Fistula Should Be Low Profile (4F-6F) And Should Come With A Elongatable Waist. , Peripheral Snare With Tungsten Loop Coated With Titanium Nitride - Dcgi With Ce/ Us Fda Approved Loop Size 5Mm To 35Mm. Shaft Size Up To 6F , Peripheral Snare With Tungsten Loop Coated With Titanium Nitride (5Mm To 35Mm) -Dcgi With Us Fda / Ce Approved , Ivc Filter For Optimal Filtration Of Ivc Up To 23Mm -Dcgi With Us Fda / Ce Approved ?Made Of National And Filter Length Up To 40 ?For Temporary Placement It Should Be Administrable From Jugular/ Femoral Route , Coronary Snare With Tungsten Loop Coated With Titanium Nitride (4Mm&7Mm) -Dcgi With Us Fda / Ce Approved , Steerable Sheath With Deflectable Tip (190-160Degree) -Dcgi With Us Fda / Ce Approved , Pva Particles With Consistent Sized Particles - Dcgi With Us Fda/ Ce Approved , Endomyocardial Biopsy (Emb) Forceps Set - Us Fda Approved Set Should Include ?Should Include An Endomyo-Cardial Biopsy Foreeps And Compatible Pre-Shaped Introducer Sheath With Side Arm And Its Dilator , Endomyocardial Biopsy (Emb) Forceps Set – Ce/Dcgi Approved Set Should Include ?Should Include An Endomyo-Cardial Biopsy Foreeps And Compatible Pre-Shaped Introducer Sheath With Side Arm And Its Dilator ?Variable Lengths And Sizes Should Be Available For Both For Jugular And Femoral Access , Intravascular Retriever – Snare (‘Amplatz Gooseneck’ Type) - Us Fda Approved Snare Kit Should Include ?A Snare And Its Compatible Sheath ?Should Have Nitinol Shaft ?Should Have 90 Degree Preformed Snare Loop Variable Sizes Of Loop (5-35 Mm) , Intravascular Retriever – Snare (‘Amplatz Gooseneck’ Type) - Ce Approved Snare Kit Should Include ?A Snare And Its Compatible Sheath ?Should Have Nitinol Shaft ?Should Have 90 Degree Preformed Snare Loop Variable Sizes Of Loop (5-35 Mm) , Intravascular Retriever – Snare (‘Amplatz Gooseneck’ Type) –Dcgiapproved Snare Kit Should Include ?A Snare And Its Compatible Sheath ?Should Have Nitinol Shaft ?Should Have 90 Degree Preformed Snare Loop Variable Sizes Of Loop (5-35 Mm) , Sheaths For Intravascular Snares - Us Fda Approved Should Be Compatible With Item No. 3 &4 , Sheaths For Intravascular Snares - Ce Approved Should Be Compatible With Item No. 3 & 4 , Sheaths For Intravascular Snares – Dcgi Approved Should Be Compatible With Item No. 3 & 4 , Intravascular Retriever – Microsnare (‘ Amplatz Gooseneck’ Type) - Us Fda Approved Microsnare Kit Should Include ?A Microsnare, Compatible Micro – Catheter, Micro – Catheter Introducer And A Torque Device ?Should Have Nitinol Shaft ?Should Have 90 Degree Preformed Snare Loop Variable Sizes (2-7 Mm) , Intravascular Retriever – Microsnare (‘ Amplatz Gooseneck’ Type) - Ce Approved Microsnare Kit Should Include ?A Microsnare, Compatible Micro – Catheter, Micro – Catheter Introducer And A Torque Device ?Should Have Nitinol Shaft ?Should Have 90 Degree Preformed Snare Loop Variable Sizes (2-7 Mm) , Intravascular Retriever – Microsnare (‘ Amplatz Gooseneck’ Type) – Dcgiapproved Microsnare Kit Should Include ?A Microsnare, Compatible Micro – Catheter, Micro – Catheter Introducer And A Torque Device ?Should Have Nitinol Shaft ?Should Have 90 Degree Preformed Snare Loop Variable Sizes (2-7 Mm) , Accessories For Intravascular Microsnare - Us Fda Approved Should Be Compatible With Item No. 7 & 8 , Accessories For Intravascular Microsnare - Ce Approved Should Be Compatible With Item No. 7 & 8 , Accessories For Intravascular Microsnare – Dcgiapproved Should Be Compatible With Item No. 7 & 8 , Intravascular Retriever – Basket - Us Fda Approved Set Should Include ?Basket Retriever And Its Catheter Should Be Available In All Sizes , Intravascular Retriever – Basket - Ce Approved Set Should Include ?Basket Retriever And Its Catheter Should Be Available In All Sizes , Intravascular Retriever – Basket – Dcgi Approved Set Should Include ?Basket Retriever And Its Catheter Should Be Available In All Sizes , Intravascular Retriever Snare Kit Goose Neck Type – Dcgi & Us Fda / Ce Approved , Sizing Balloon For Device Closure — Circular Shape - Ce Approved , Sizing Balloon For Device Closure - Round Shape - Dcgi /Ce Approved , Cobalt Cliromium Renal Stents, Premounted On Balloon Dcgi Approved · Monorail (Rapid Exchange) And Over-The-Wire (Otw) · Available In The Sizes And Lengthsthree Mid-Strut To Mid-Strut Connectors Between Two Rings. • Two Different Crown Design For Diameters Between 5- 7 Mm. • Crossing Profile = 1.50 Mm • Zero Foreshortening • Available In 5,6 And 7Mm Diameters With Length Of 12,15 And 18 Mm. , Permanent Venacava Filter– Ce Approved , Permanent Venacava Filter– Us Fda Approved , Permanent Venacava Filter– Dcgi Approved , Temporary Venacava Filter– Ce Approved , Temporary Venacava Filter– Us Fda Approved , Temporary Venacava Filter– Dcgi Approved , 1 Port Cath-Lock™ Introducer Sheath With Hemostasis Valve And Sideport, Dilator,And 50 Cm Double Distal Guidewire With “J” And Straight Ends , 2 Port Hemostasis Adapter With Sideports And Cath-Lock™ Sealing Mechanism, Venous Sheath,Dilator And 50 Cm Double Distal Guidewire With “J” And Straight Ends , 3 Port Hemostasis Adapter With Sideports And Cath-Lock™ Sealing Mechanism, Venous Sheath,Dilator And 50 Cm Double Distal Guidewire With “J” And Straight Ends , Introducer Sheath With Hemostasis Valve And Sideport, And Dilator , Mullins Style Curve 6/7/8 F Size, 61Cm Usable Length , 67Cm Dilator Usable Length , Swartz Lntroducer Braided Sheath With Hemostatic Valve Sl0/Sl1/Sl2/Sl3 (8F, 63 Cm Usable Length And 67Cm Dilator Usable Length) Accomodates Maximum 0.32 Guidewire , Swartz Lntroducer Non Braided Sheath With Hemostatic Valve Sr0/Sr1/Sr2/Sr3 (8F, 63 Cm),(8F, 63 Cm Usable Length) Accomodates Maximum 0.38 Guidewire , 8.5 F : 71 Cm Bi-Directional (Assymetrical ) Deflectable Sheath , Curl Dimension 16.8Mm And 22.4 Mm With Integrated Hemostasis Valve And Radiopaque Tip Marker And Various Curve Options , Compatible With 98 Cm Transseptal Needle Along With 180 Cm Super Stiff Guidewire , 8.5 F : 40 Cm Bi-Directional (Assymetrical ) Deflectablesheath Used For Epicardialwith Integrated Hemostasis Valve And Radiopaque Tip Marker And Various Curve Options , Brk/Brk-1Needle-Adult, 18 Gauge, Usable Length 71 Cm. , Brk/Brk-1 Needle-Adult, 18 Gauge, Usable Length 98 Cm. , Fixed Curve Quadripolar Electrophysiology Catheter (6F/5F/4F, 1Mm Band Electrode) Crd/Jsn/Dao, 2-5-2 Mm Electrode Spacing , Fixed Curve Quadripolar Electrophysiology Catheter (6F) Crd-2, 5Mmelectrode Spacing , Fixed Cuve (Csl) Decapolar Catheter (6F) -65 Cm Usable Length With 5-5-5 Spacing With Tip Electrode 2Mm , Fixed Cuve (Csl) Decapolar Catheter (6F) -120 Cm Usable Length With 5-5-5 Spacing With Tip Electrode 2Mm , Deflectable Decapolar Electrophysiology Catheter With Connector (6F)-110Cm Usable Length With 2-5-2 Spacing , Deflectable Decapolar Electrophysiology Catheter With Connector (5F)-110Cm Usable Length With 2-5-2 Spacing , Deflectable Decapolar Electrophysiology Catheter With Connector (4F)-110Cm Usable Length With 2-5-2 Spacing , Duodecapolar Electrophysiology Catheter-20 Poles (7F) Usable Length 95Cm With 5-5-5 Spacing, 1Mm Band Electrode , 8F Sensor Enabled Uni-Directional Circular Mapping Catheter With 3-3-3Mm & 5-5-5Mm Electrode Specification, 2Mm Tip & 1 Mm Band Electrode With Fixed Loop , 8F Sensor Enabled Bi-Directionalcircular Mapping Catheter Df Curve 3-3-3Mm- & 5-5-5Mm Specification, 2Mm Tip & 1 Mm Band Electrode With Fixed Loop , 8F Sensor Enabled Uni-Directional Circular Mapping Catheter With 6.5Mm Electrode Spacing Variable Loop With 15-25 Mm Range , 8F Sensor Enabled Bi-Directional Circular Mapping Catheter With 1-4-1 Mm Electrode Spacing Variable Loop With 15-25 Mm Range , 8F-Irrigated Bidirectional 16 Electrode ,2F Splines, 3 Mm Spacing , 1Mm Electrode Size,High Density Sensor Enable Mapping Cathter Comaptible With Ensite Mapping System , Bi-D-Deflectable Radio Frequency Ablation Catheter (7 F, 4Mm Tip ) 2-5-2 Electrode Spacing - With Universal Temperature Sensor (Thermocouple And Thermistor Temperature Monitoring Capability),Should Be Compatable To Use With Ibi T11 & Ampere Rf , Uni-D-Deflectable Radio Frequency Ablation Catheter (7 F, 4Mm Tip ) 2-5-2 Electrode Spacing, Usable Length 110Cm ,Should Be Compatable To Use With Ibi T11 & Ampere Rf , Uni-D-Deflectable Radio Frequency Ablation Catheter (5 F, 4Mm Tip ) 2-5-2 Electrode Spacing ,Should Be Compatable To Use With Ibi T11 & Ampere Rf , Irrigated Bi- Directional Ablation Catheter With Flexible Tip1-4-1, Symmetric And Asymmetric Option , Should Be Compatable To Use With Ibi T11 & Ampere Rf Generator , Irrigated Uni- Directional Ablation Catheter With Flexible Tip1-4-1, D And F Curve , Should Be Compatable To Use With Ibi T11 & Ampere Rf Generator , Contact Force Sensor Enable Catheter With Fiber Optic Technology For Force Detection 3.5 Mm Tip Electrode 8F , Six Saline Irrigation Hole, 2-2-2 Ring Spacing,Should Be Compatable To Use With Ibi T11 & Ampere Rf , Intracardiac Echo Catheter-9F Size ,Transducer Type 64 Element Phased Array , Viewing Sector 80 Degrees, Tip Deflection Anterior/Posterior, Left/Right +/- 120 Degree Flexion Compatible With Philips Cx50 Echo System , Magnetic & Impedance (Hybrid) Based Patches For Electroanotomical Mapping For Use With Ensite 3D Mapping System. , Magnetic Based Patches For Electroanotomical Mapping For Use With Ensite 3D Mapping System. , Cool Point Tubing Set For Irrigated Rf Catheter With Dedicated Pressure Sensor And Compatible With Abbott Coolpoint Pump , Cables For Fixed Quadripolar Electrophysiology Catheters , Cables For Fixed Decapolar Electrophysiology Catheters , Cables For Deflectable Decapolar Electrophysiology Catheters , Cables For Highdensity Mappingelectrophysiology Catheters Compatible With Ensite Mapping System , Cables For Ablation Range Ofelectrophysiology Catheters Compatible Compatable To Use With Ibi T11 & Ampere Rf , Cable For Fixed Loop Circular Mapping Catheters , Cable For Variable Loop Circular Mapping Catheters , Us Fda/Ce Approved Permanent Pacemakers With All Leads And Accessories ·Vvir ·All Single Chamber Modes And Basic Pacing Programmable Parameters ·Must Have Ventricular Capture Management ·The Size Of Lead Must Be 7F Or Less ·The Lead Must Be Steroid Eluting And Should Be Both Bipolar And Unipolar Configuration ·Must Have Both Active And Passive Fixation Endocardial Leads Available ··Direct Presence Of Parent Companyin India (Not Only Through The Distributors ) And Company Must Provide Its Trained Technical Person For Each Implantation When Ever Required And Forfollow Up Programming When It Is Required ·Company Must Provide At Least One Programmer Exclusively To The Cardiology Dept. ·Company Must Quote Only The Latest Model Of Devices Commercially Available , Dcgiapproved Permanent Pacemakers With All Leads And Accessories ·Vvir ·All Single Chamber Modes And Basic Pacing Programmable Parameters ·Must Have Ventricular Capture Management ·The Size Of Lead Must Be 7F Or Less ·The Lead Must Be Steroid Eluting And Should Be Both Bipolar And Unipolar Configuration ·Must Have Both Active And Passive Fixation Endocardial Leads Available ·Life Time Replacement Warranty. ·Direct Presence Of Parent Companyin India (Not Only Through The Distributors ) And Company Must Provide Its Trained Technical Person For Each Implantation When Ever Required And Forfollow Up Programming When It Is Required ·Company Must Provide At Least One Programmer Exclusively To The Cardiology Dept. ·Company Must Quote Only The Latest Model Of Devices Commercially Available , D.D.D Pacemaker With All Accessories- Dcgi & Fda Approved /Ce Approved , Dddr Mri Pacemaker With All Accessories -Dcgi & Us Fda/Ce Approved , Dddr Mri Pacemaker With All Accessories And Life Time Warranty -Dcgi & Us Fda/Ce Approved ·Latest And New 3T Full Body Mri, Beat To Beat Capture Mgt, ·Algorithm To Manage Neuro-Cardiogenic Syncope, ·Af Suppression, Optimization Of Av Delay, Congestion Monitoring. , Dicd-40J Deliver Fable Energy - -Dcgi & Us Fda Approved /Ce Approved , Crtp-Quadripolar-Egm Based Dynamic Av Delay Optimization-Dcgi & Us Fda Approved /Ce Approved ·Congestion Monitoring Algorithm ·Capture Management For All Chambers ·Option Of Triggered Biv Pacing During Af ·Capable Of Wireless Telemetry , Crtp-Multipoint Egm Based Dynamic Av Delay Optimization -Dcgi & Us Fda Approved /Ce Approved ·Lv Lead Able To Pace At Two Points In Lv In One Cycle ·Qudripolar Leadwith Mri Compitable Device ·Congestion Monitoring Algorithm ·Capture Management For All Chambers ·Option Of Triggered Biv Pacing During Af ·Capable Of Wireless Telemetry , Crt-D Quadriopolar Df-4 Fda/Ce Approved Latest And New 40J Deliver Fable Energy – -Dcgi & Us Fda Approved /Ce Approved ·Full Body Mri, Congestion Monitoringng Rv Lead 7F Or Less ·Af Suppression ·Egm Based Av Delay Optimization ·Mechanism For Narrow Qrs By Synchronizing Intrinsic And Paced Pulses , Crt-D Multipoint Df-4 Fda/Ce Approved Latest And New 40J Deliver Fable Energy- -Dcgi & Us Fda /Ce Approved ·Full Body Mri, Congestion Monitoringng Rv Lead 7F Or Less ·Af Suppression ·Egm Based Av Delay Optimization ·Mechanism For Narrow Qrs By Synchronizing Intrinsic And Paced Pulses , Us Fda/Ce Approved Permanent Pacemakers With All Leads And Accessories ·Ddd ·Allmodes And Basic Pacing Programmable Parameters Including Hystersis ·The Size Of Lead Must Be 6F Or Less ·The Lead Must Be Steroid Eluting And Should Be Both Bipolar And Unipolar Configuration ·Must Have Both Active And Passive Fixation Endocardial Leads Available ··Direct Presence Of Parent Companyin India (Not Only Through The Distributors ) And Company Must Provide Its Trained Technical Person For Each Implantation When Ever Required And Forfollow Up Programming When It Is Required ·Company Must Provide At Least One Programmer Exclusively To The Cardiology Dept. ·Company Must Quote Only The Latest Model Of Devices Commercially Available , Us Fda/Ce Approved Permanent Pacemakers With All Leads And Accessories ·Ddd ·Allmodes And Basic Pacing Programmable Parameters Including Hystersis ·The Size Of Lead Must Be 6F Or Less And With His Bundal Pacing Lead ·The Lead Must Be Steroid Eluting And Should Be Both Bipolar And Unipolar Configuration ·Must Have Both Active And Passive Fixation Endocardial Leads Available ·Direct Presence Of Parent Companyin India (Not Only Through The Distributors ) And Company Must Provide Its Trained Technical Person For Each Implantation When Ever Required And Forfollow Up Programming When It Is Required ·Company Must Provide At Least One Programmer Exclusively To The Cardiology Dept. ·Company Must Quote Only The Latest Model Of Devices Commercially Available , Dcgiapproved Permanent Pacemakers With All Leads And Accessories ·Ddd ·Allmodes And Basic Pacing Programmable Parameters Including Hystersis ·The Size Of Lead Must Be 6F Or Less And With His Bundal Pacing Lead ·The Lead Must Be Steroid Eluting And Should Be Both Bipolar And Unipolar Configuration ·Must Have Both Active And Passive Fixation Endocardial Leads Available · ·Direct Presence Of Parent Companyin India (Not Only Through The Distributors ) And Company Must Provide Its Trained Technical Person For Each Implantation When Ever Required And Forfollow Up Programming When It Is Required ·Company Must Provide At Least One Programmer Exclusively To The Cardiology Dept. ·Company Must Quote Only The Latest Model Of Devices Commercially Available , Dcgi Approved Permanent Pacemakers With All Leads And Accessories ·Ddd ·Allmodes And Basic Pacing Programmable Parameters Including Hystersis ·The Size Of Lead Must Be 6F Or Less - His/Lbba Pacing ·The Lead Must Be Steroid Eluting And Should Be Both Bipolar And Unipolar Configuration ·Must Have Both Active And Passive Fixation Endocardial Leads Available ·Life Time Replacement Warranty. ·Direct Presence Of Parent Companyin India (Not Only Through The Distributors ) And Company Must Provide Its Trained Technical Person For Each Implantation When Ever Required And Forfollow Up Programming When It Is Required ·Company Must Provide At Least One Programmer Exclusively To The Cardiology Dept. ·Company Must Quote Only The Latest Model Of Devices Commercially Available , Us Fda/Ce Approved Permanent Pacemakers With All Leads And Accessories ·Dddr ·Allsingle Modes And Basic Pacing Programmable Parameters And With Special Features ·Must Have Approved Algorithm For Atrial Fibrillation Suppression With Programmable Automatic Mode Switch Basel Rate. ·Must Have Ventricular Capture Management - Must Have Mri Compitable ·Must Have P & R Wave Measurement ·The Size Of Lead Must Be 6F Or Less ·The Lead Must Be Steroid Eluting And Should Be Both Bipolar And Unipolar Configuration ·Must Have Both Active And Passive Fixation Endocardial Leads Available ··Direct Presence Of Parent Companyin India (Not Only Through The Distributors ) And Company Must Provide Its Trained Technical Person For Each Implantation When Ever Required And Forfollow Up Programming When It Is Required ·Company Must Provide At Least One Programmer Exclusively To The Cardiology Dept. ·Company Must Quote Only The Latest Model Of Devices Commercially Available , Us Fda/Ce Approved Permanent Pacemakers With All Leads And Accessories ·Dddr ·Allmodes And Basic Pacing Programmable Parameters And Special Features ·Must Have Approved Af Suppression Algorithm & Fluid Monitoring. ·Must Have Ventricular Capture Management ·Must Have P & R Wave Measurement ·The Size Of Lead Must Be 6F Or Less ·The Lead Must Be Steroid Eluting And Should Be Both Bipolar And Unipolar Configuration ·Must Have Both Active And Passive Fixation Endocardial Leads Available ·Life Time Replacement Warranty. ·Direct Presence Of Parent Companyin India (Not Only Through The Distributors ) And Company Must Provide Its Trained Technical Person For Each Implantation When Ever Required And Forfollow Up Programming When It Is Required ·Company Must Provide At Least One Programmer Exclusively To The Cardiology Dept. ·Company Must Quote Only The Latest Model Of Devices Commercially Available , Us Fda/Ce Approved Permanent Pacemakers With All Leads And Accessories ·Dddr ·Allmodes And Basic Pacing Programmable Parameters And Special Features ··Must Have Ventricular Capture Management ·Must Have P & R Wave Measurement - Lbba Pacing System - Style Driven Lead ·The Size Of Lead Must Be 6F Or Less - Must Have Congestion Monitoring ·The Lead Must Be Steroid Eluting And Should Be Both Bipolar And Unipolar Configuration ·Have Feature For Optimization Of Av Delay ·Must Have Both Active And Passive Fixation Endocardial Leads Available ·Life Term Replacement Warranty. ·Direct Presence Of Parent Companyin India (Not Only Through The Distributors ) And Company Must Provide Its Trained Technical Person For Each Implantation When Ever Required And Forfollow Up Programming When It Is Required ·Company Must Provide At Least One Programmer Exclusively To The Cardiology Dept. ·Company Must Quote Only The Latest Model Of Devices Commercially Available , Aicd Single Chamber Pacemaker With All Leads - Us Fda/Ce Approved ,Icd With All Leads ·Single Chamber ·Rv Lead Must Be 7F Or Less - Must Have Mri Compitble ·All Basic Programmable Parameters ·Lead Should Be Steroid Eluting ·Should Have Both Active And Passive Fixation Leads ·Should Be Minimum 8+2 Year Warranty ·Direct Presence Of Parent Companyin India (Not Only Through The Distributors ) And Company Must Provide Its Trained Technical Person For Each Implantation When Ever Required And Forfollow Up Programming When It Is Required ·Company Must Provide At Least One Programmer Exclusively To The Cardiology Dept. ·Company Must Quote Only The Latest Model Of Devices Commercially Available , Aicd Single Chamber Pacemaker With All Leads – Dcgiapproved ,Icd With All Leads ·Single Chamber ·Rv Lead Must Be 7F Or Less - Must Have Mri Compitble ·All Basic Programmable Parameters ·Lead Should Be Steroid Eluting ·Should Have Both Active And Passive Fixation Leads ·Should Be Minimum 8+2 Year Warranty ·Direct Presence Of Parent Companyin India (Not Only Through The Distributors ) And Company Must Provide Its Trained Technical Person For Each Implantation When Ever Required And Forfollow Up Programming When It Is Required ·Company Must Provide At Least One Programmer Exclusively To The Cardiology Dept. ·Company Must Quote Only The Latest Model Of Devices Commercially Available. , Aicd Dual Chamber Pacemaker With All Leads -Us Fda/Ce Approved ,Icd With All Leads And All Accessories ·Dual Chamber ·Rv Lead Must Be 7F Or Less ·All Basic Programmable Parameters ·Lead Should Be Steroid Eluting ·Should Have Both Active And Passive Fixation Leads ·Should Be Minimum 5+3 Year Warranty ·Direct Presence Of Parent Companyin India (Not Only Through The Distributors ) And Company Must Provide Its Trained Technical Person For Each Implantation When Ever Required And Forfollow Up Programming When It Is Required ·Company Must Provide At Least One Programmer Exclusively To The Cardiology Dept. ·Company Must Quote Only The Latest Model Of Devices Commercially Available , Aicd Dual Chamber Pacemaker With All Leads- Dcgiapproved ,Icd With All Leads And All Accessories ·Dual Chamber ·Rv Lead Must Be 9F Or Less ·All Basic Programmable Parameters ·Lead Should Be Steroid Eluting ·Should Have Both Active And Passive Fixation Leads ·Should Be Minimum 5+3 Year Warranty ·Direct Presence Of Parent Companyin India (Not Only Through The Distributors ) And Company Must Provide Its Trained Technical Person For Each Implantation When Ever Required And Forfollow Up Programming When It Is Required ·Company Must Provide At Least One Programmer Exclusively To The Cardiology Dept. ·Company Must Quote Only The Latest Model Of Devices Commercially Available , Aicd Single Chamber Device With All Leads -Icd With All Leads And All Accessories - Dcgiand Us Fda/ Ce Approved ·Should Have Latest Bluetooth Technology Low Energy Communication Enabling Smart Phone Connectivity Through Secured Data Encryption. ·Should Have Multi Point Pacing Delivers Multiple Lv Pacing Pulse/Cardiac Cycle In Both Lv And Biv Pacing Modes. ·Should Have Improvised Sync-Av Pulse Crt Technology Offer Dynamic Av Timing. ·40 J Delivered Energy For Enhanced Safety Margin ·Should Have Full Body 3-Tesla Mri Compatibility. ·Direct Presence Of Parent Companyin India (Not Only Through The Distributors) And Company Must Provide Its Trained Technical Person For Each Implantation Whenever Required And Forfollow Up Programming When It Is Required. ·Company Must Provide At Least One Programmer Exclusively To The Cardiology Dept., ·Company Must Quote Only The Latest Model Of Devices Commercially Available. , Aicd Dual Chamber Device With All Leads -Icd With All Leads And All Accessories - Dcgiand Us Fda/ Ce Approved ·Should Have Latest Bluetooth Technology Low Energy Communication Enabling Smart Phone Connectivity Through Secured Data Encryption. ·Should Have Multi Point Pacing Delivers Multiple Lv Pacing Pulse/Cardiac Cycle In Both Lv And Biv Pacing Modes. ·Should Have Improvised Sync-Av Pulse Crt Technology Offer Dynamic Av Timing. ·40 J Delivered Energy For Enhanced Safety Margin ·Should Have Full Body 3-Tesla Mri Compatibility. ·Direct Presence Of Parent Companyin India (Not Only Through The Distributors) And Company Must Provide Its Trained Technical Person For Each Implantation Whenever Required And Forfollow Up Programming When It Is Required. ·Company Must Provide At Least One Programmer Exclusively To The Cardiology Dept., ·Company Must Quote Only The Latest Model Of Devices Commercially Available , Us Fda/Ce Approved, Biventricular Pacemaker With Atrial,Rv, Lv Leads And All Accessories Required During Implantation ·Must Have Separate Programmable Rv, Lv Lead Amplitude, Pulse Width And Vv Delay And Should Have Following Special Features ·Must Have Facility For Egm Based Optimization Of Av, Pv And Vv Delays ·The Size Of Atrial And Rv Leads Should Be 7F Or Less ·The Leads Should Be Steroid Eluting And Should Be Bipolar And Unkipolar Configuration ·Should Have Both Active And Passive Fixation Ra & Rv Endocardial Leads ·Should Have Epicardial Lead For Epicardial Lv Lead Implantation ·Replacement Warranty Not Less Than 5 Years ·Direct Presence Of Parent Companyin India (Not Only Through The Distributors ) And Company Must Provide Its Trained Technical Person For Each Implantation When Ever Required And Forfollow Up Programming When It Is Required ·Company Must Provide At Least One Programmer Exclusively To The Cardiology Dept. ·Company Must Quote Only The Latest Model Of Devices Commercially Available , Dcgiapproved, Biventricular Pacemaker With Atrial,Rv, Lv Leads And All Accessories Required During Implantation ·Must Have Separate Programmable Rv, Lv Lead Amplitude, Pulse Width And Vv Delay And Should Have Following Special Features ·Must Have Facility For Egm Based Optimization Of Av, Pv And Vv Delays ·The Size Of Atrial And Rv Leads Should Be 7F Or Less ·The Leads Should Be Steroid Eluting And Should Be Bipolar And Unkipolar Configuration ·Should Have Both Active And Passive Fixation Ra & Rv Endocardial Leads ·Should Have Epicardial Lead For Epicardial Lv Lead Implantation ·Replacement Warranty Not Less Than 5 Years ·Direct Presence Of Parent Companyin India (Not Only Through The Distributors ) And Company Must Provide Its Trained Technical Person For Each Implantation When Ever Required And Forfollow Up Programming When It Is Required ·Company Must Provide At Least One Programmer Exclusively To The Cardiology Dept. , Us Fda/Ce Approved Biventricular Pacemaker + Icd (Combo Device) With Atrial, Rv, Lv Leads And All Accessories Rquired During Impantation ·Must Have All Basic Programmable Parameters ·Must Have Separate Programmable Rv, Lv Lead Amplitude, Pulse Width And Vv Delay ·The Leads Should Be Steroid Eluting ·Should Have Both Active And Passive Fixation Ra & Rv Endocardial Leadsr - Rv Lead 7F Or Less ·Should Have Epicardial Lead For Epicardial Lv Lead Implantation ·Replacement Warranty Not Less Than 3 + 2 Years ·Direct Presence Of Parent Companyin India (Not Only Through The Distributors ) And Company Must Provide Its Trained Technical Person For Each Implantation When Ever Required And Forfollow Up Programming When It Is Required ·Company Must Provide At Least One Programmer Exclusively To The Cardiology Dept. ·Company Must Quote Only The Latest Model Of Devices Commercially Available , Dcgiapproved Biventricular Pacemaker + Icd (Combo Device) With Atrial, Rv, Lv Leads And All Accessories Rquired During Impantation ·Must Have All Basic Programmable Parameters ·Must Have Separate Programmable Rv, Lv Lead Amplitude, Pulse Width And Vv Delay ·The Leads Should Be Steroid Eluting ·Should Have Both Active And Passive Fixation Ra & Rv Endocardial Leads ·Should Have Epicardial Lead For Epicardial Lv Lead Implantation ·Replacement Warranty Not Less Than 3 + 2 Years ·Direct Presence Of Parent Companyin India (Not Only Through The Distributors ) And Company Must Provide Its Trained Technical Person For Each Implantation When Ever Required And Forfollow Up Programming When It Is Required ·Company Must Provide At Least One Programmer Exclusively To The Cardiology Dept. ·Company Must Quote Only The Latest Model Of Devices Commercially Available , Us Fda/Ce Approved Biventricular Pacemaker + Icd (Combo Device) With Atrial, Rv, Lv Leads And All Accessories Rquired During Impantation ·Must Have Quadripolar Lead For Lv Pacing ·Must Have All Basic Programmable Parameters With Following Special Features ·Facility Of Atp During Charging For Defibrillation ·Must Have Separate Programmable Rv, Lv Lead Amplitude, Pulse Width And Vv Delay ·Must Have Fluidmonitoring System - Rv Lead 7F Or Less ·The Leads Should Be Steroid Eluting ·Should Have Both Active And Passive Fixation Ra & Rv Endocardial Leads ·Should Have Epicardial Lead For Epicardial Lv Lead Implantation ·Replacement Warranty Not Less Than 3 + 2 Years ·Direct Presence Of Parent Companyin India (Not Only Through The Distributors ) And Company Must Provide Its Trained Technical Person For Each Implantation When Ever Required And Forfollow Up Programming When It Is Required ·Company Must Provide At Least One Programmer Exclusively To The Cardiology Dept. , Dcgiapproved Biventricular Pacemaker + Icd (Combo Device) With Atrial, Rv, Lv Leads And All Accessories Rquired During Impantation ·Must Have Quadripolar Lead For Lv Pacing ·Must Have All Basic Programmable Parameters With Following Special Features ·Facility Of Atp During Charging For Defibrillation ·Must Have Separate Programmable Rv, Lv Lead Amplitude, Pulse Width And Vv Delay ·Must Have Fluidmonitoring System ·The Leads Should Be Steroid Eluting ·Should Have Both Active And Passive Fixation Ra & Rv Endocardial Leads ·Should Have Epicardial Lead For Epicardial Lv Lead Implantation ·Replacement Warranty Not Less Than 3 + 2 Years ·Direct Presence Of Parent Companyin India (Not Only Through The Distributors ) And Company Must Provide Its Trained Technical Person For Each Implantation When Ever Required And Forfollow Up Programming When It Is Required ·Company Must Provide At Least One Programmer Exclusively To The Cardiology Dept. ·Company Must Quote Only The Latest Model Of Devices Commercially Available , Us Fda/Ce Approved Biventricular Pacemaker + Icd (Combo Device) With Atrial, Rv, Lv Leads And All Accessories Rquired During Impantation ·Must Have Separate Programmable Rv, Lv Lead Amplitude, Pulse Width And Vv Delay And Shouldhave Following Special Feature ·The Lv Lead Must Be Quadripolar. - Rv Lead Must Be 7F Or Less ·The Leads Should Be Steroid Elutingand Should Be Both Bipolar And Unipolar ·Should Have Both Active And Passive Fixation Ra & Rv Endocardial Leads ·Should Have Epicardial Lead For Epicardial Lv Lead Implantation ·Replacement Warranty Not Less Than 3 + 2 Years ·Direct Presence Of Parent Companyin India (Not Only Through The Distributors ) And Company Must Provide Its Trained Technical Person For Each Implantation When Ever Required And Forfollow Up Programming When It Is Required ·Company Must Provide At Least One Programmer Exclusively To The Cardiology Dept. ·Company Must Quote Only The Latest Model Of Devices Commercially Available , Dcgiapproved Biventricular Pacemaker + Icd (Combo Device) With Atrial, Rv, Lv Leads And All Accessories Rquired During Impantation ·Must Have Separate Programmable Rv, Lv Lead Amplitude, Pulse Width And Vv Delay And Shouldhave Following Special Feature ·The Lv Lead Must Be Quadripolar. ·The Leads Should Be Steroid Elutingand Should Be Both Bipolar And Unipolar ·Should Have Both Active And Passive Fixation Ra & Rv Endocardial Leads ·Should Have Epicardial Lead For Epicardial Lv Lead Implantation ·Replacement Warranty Not Less Than 3 + 2 Years ·Direct Presence Of Parent Companyin India (Not Only Through The Distributors ) And Company Must Provide Its Trained Technical Person For Each Implantation When Ever Required And Forfollow Up Programming When It Is Required ·Company Must Provide At Least One Programmer Exclusively To The Cardiology Dept. ·Company Must Quote Only The Latest Model Of Devices Commercially Available , Lead Less Pacemaker With All Accessories.–Dcgiand Us Fda/ Ce Approved Vvi, Mri Compitable Must Have Retrievable Option , Lead Less Pacemaker With All Accessories.–Dcgiand Us Fda/ Ce Approved Ddd Mri Compitable Must Have Retrievable Option , Crt- D Combo Device With All Leads -Icd With All Leads And All Accessories - Dcgiand Us Fda/ Ce Approved ·Should Have Latest Bluetooth Technology Low Energy Communication Enabling Smart Phone Connectivity Through Secured Data Encryption. ·Should Have Multi Point Pacing Delivers Multiple Lv Pacing Pulse/Cardiac Cycle In Both Lv And Biv Pacing Modes. ·Should Have Improvised Sync-Av Pulse Crt Technology Offer Dynamic Av Timing. ·40 J Delivered Energy For Enhanced Safety Margin ·Should Have Full Body 3-Tesla Mri Compatibility. , Dcgiapproved Permanent Pacemakers With All Leads And Accessories Vvi ? All Single Chamber Modes And Basic Pacing Programmable Parameters ? The Size Of Lead Must Be 7F Or Less ? The Lead Must Be Steroid Eluting And Should Be Both Bipolar And Unipolar Configuration ? Must Have Both Active And Passive Fixation Endocardial Leads Available ? Life Time Replacement Warranty. ? Direct Presence Of Parent Companyin India (Not Only Through The Distributors ) And Company Must Provide Its Trained Technical Person For Each Implantation When Ever Required And Forfollow Up Programming When It Is Required ? Company Must Provide At Least One Programmer Exclusively To The Cardiology Dept. ? Company Must Quote Only The Latest Model Of Devices Commercially Available , Us Fda/Ce Approved Permanent Pacemakers With All Leads And Accessories ? Vvir ? All Single Chamber Modes And Basic Pacing Programmable Parameters ? Must Have Mri Compatible ? Must Have Programmable Sensor Control Rest Rate ? Must Have Ventricular Capture Management ? The Size Of Lead Must Be 8F Or Less ? The Lead Must Be Steroid Eluting And Should Be Both Bipolar And Uni-Polar Configuration ? Must Have Both Active And Passive Fixation Endo-Cardial Leads Available ? Life Time Replacement Warranty. ? Direct Presence Of Parent Companyin India (Not Only Through The Distributors ) And Company Must Provide Its Trained Technical Person For Each Implantation When Ever Required And Forfollow Up Programming When It Is Required , Dcgiapproved Permanent Pacemakers With All Leads And Accessories Vvir ? All Single Chamber Modes And Basic Pacing Programmable Parameters ? Must Have Mri Compatible ? Must Have Programmable Sensor Control Rest Rate ? Must Have Ventricular Capture Management ? The Size Of Lead Must Be 8F Or Less ? The Lead Must Be Steroid Eluting And Should Be Both Bipolar And Uni-Polar Configuration ? Must Have Both Active And Passive Fixation Endo- Cardial Leads Available ? Life Time Replacement Warranty. ? Direct Presence Of Parent Companyin India (Not Only Through The Distributors ) And Company Must Provide Its Trained Technical Person For Each Implantation When Ever Required And Forfollow Up Programming When It Is Required ? Company Must Provide At Least One Programmer Exclusively To The Cardiology Dept. ?Company Must Quote Only The Latest Model Of Devices Commercially Available , Us Fda/Ce Approved Permanent Pacemakers With All Leads And Accessories • Vvir • All Single Chamber Modes And Basic Pacing Programmable Parameters • Must Have Mri Compatible • Must Have Programmable Sensor Control Rest Rate • Must Have Ventricular Capture Management • The Size Of Lead Must Be 8F Or Less • The Lead Must Be Steroid Eluting And Should Be Both Bipolar And Uni-Polar Configuration • Must Have Both Active And Passive Fixation Endo-Cardial Leads Available • Life Time Replacement Warranty. • Direct Presence Of Parent Company In India (Not Only Through The Distributors ) And Company Must Provide Its Trained Technical Person For Each Implantation When Ever Required And For Follow Up Programming When It Is Required • Company Must Provide At Least One Programmer Exclusively To The Cardiology Dept. Company Must Quote Only The Latest Model Of Devices Commercially Available. , V.V.I Pacemaker With All Accessories And Life Time Warranty -Dcgi & Us Fda/Ce Approved • Latest And New Full Body Mri, Beat To Beat Capture Mgt, , D.D.D Pacemaker With All Accessories And Life Time Warranty- Dcgi & Fda Approved /Ce Approved , Dddr Mri Pacemaker With All Accessories And Life Time Warranty -Dcgi & Us Fda/Ce Approved , Sicd (Aicd) Df1 Connector--Dcgi & Us Fda Approved /Ce , Dicd-40J Deliver Fable Energy - -Dcgi & Us Fda Approved /Ce Approved , Crtp-Quadripolar-Egm Based Dynamic Av Delay Optimization-Dcgi & Us Fda Approved /Ce Approved ? Congestion Monitoring Algorithm ? Capture Management For All Chambers ? Option Of Triggered Biv Pacing During Af, ? Capable Of Wireless Telemetry , Crt-D Quadriopolar Df-4 Fda/Ce Approved Latest And New 40J Deliver Fable Energy – -Dcgi & Us Fda Approved /Ce Approved ·Full Body Mri, Congestion Monitoringng ·Af Suppression ·Egm Based Av Delay Optimization ·Mechanism For Narrow Qrs By Synchronizing Intrinsic And Paced Pulses , Crt-D Multipoint Df-4 Fda/Ce Approved Latest And New 40J Deliver Fable Energy- -Dcgi & Us Fda /Ce Approved ·Full Body Mri, Congestion Monitoringng ·Af Suppression ·Egm Based Av Delay Optimization ·Mechanism For Narrow Qrs By Synchronizing Intrinsic And Paced Pulses , Sub-Cutenous Icd Implant (Sc- I.C.D.)With All Accessories- Dcgi & Us Fda Approved /Ce Approved , Permanent Pacemakers With All Leads And Accessories - Us Fda/Ce Approved ? Vdd ? All Vdd & Single Chamber Modes And Basic Pacing Programmable Parameters And With Following Special Features ? Must Have Ventricular Capture Management ? The Size Of Lead Must Be 9F Or Less ? The Lead Must Be Steroid Eluting And Should Be Both Bipolar Configuration ? Having Passive Fixation Endocardial Leads Available ? Life Time Replacement Warranty. ? Direct Presence Of Parent Companyin India (Not Only Through The Distributors ) And Company Must Provide Its Trained ? Technical Person For Each Implantation When Ever Required And Forfollow Up Programming When It Is Required ? Company Must Provide At Least One Programmer Exclusively To The Cardiology Dept. Company Must Quote Only The Latest Model Of Devices Commercially Available. , Permanent Pacemakers With All Leads And Accessories - Dcgiapproved ? Vdd ? All Vdd & Single Chamber Modes And Basic Pacing Programmable Parameters And With Following Special Features ? Must Have Ventricular Capture Management ? The Size Of Lead Must Be 9F Or Less ? The Lead Must Be Steroid Eluting And Should Be Both Bipolar Configuration ? Having Passive Fixation Endocardial Leads Available ? Life Time Replacement Warranty. ? Direct Presence Of Parent Companyin India (Not Only Through The Distributors ) And Company Must Provide Its Trained ? Technical Person For Each Implantation When Ever Required And Forfollow Up Programming When It Is Required ? Company Must Provide At Least One Programmer Exclusively To The Cardiology Dept. ?Company Must Quote Only The Latest Model Of Devices Commercially Available , Us Fda/Ce Approved Permanent Pacemakers With All Leads And Accessories ? Ddd ? Allmodes And Basic Pacing Programmable Parameters Including Hystersis ? The Size Of Lead Must Be 7F Or Less ? The Lead Must Be Steroid Eluting And Should Be Both Bipolar And Unipolar Configuration ? Must Have Both Active And Passive Fixation Endocardial Leads Available ? Life Time Replacement Warranty. ? Direct Presence Of Parent Companyin India (Not Only Through The Distributors ) And Company Must Provide Its Trained Technical Person For Each Implantation When Ever Required And Forfollow Up Programming When It Is Required ? Company Must Provide At Least One Programmer Exclusively To The Cardiology Dept. ? Company Must Quote Only The Latest Model Of Devices Commercially Available , Dcgiapproved Permanent Pacemakers With All Leads And Accessories ? Ddd ? Allmodes And Basic Pacing Programmable Parameters Including Hystersis ? The Size Of Lead Must Be 7F Or Less ? The Lead Must Be Steroid Eluting And Should Be Both Bipolar And Unipolar Configuration ? Must Have Both Active And Passive Fixation Endocardial Leads Available ? Life Time Replacement Warranty. ? Direct Presence Of Parent Companyin India (Not Only Through The Distributors ) And Company Must Provide Its Trained Technical Person For Each Implantation When Ever Required And Forfollow Up Programming When It Is Required ? Company Must Provide At Least One Programmer Exclusively To The Cardiology Dept. ? Company Must Quote Only The Latest Model Of Devices Commercially Available , Us Fda/Ce Approved Permanent Pacemakers With All Leads And Accessories ? Dddr ? Allsingle Modes And Basic Pacing Programmable Parameters And With Special Features ? Must Have Approved Algorithm For Atrial Fibrillation Suppression With Programmable Automatic Mode Switch Basel Rate. ? Must Have Ventricular Capture Management ? Must Have P & R Wave Measurement ? The Size Of Lead Must Be 7F Or Less ? The Lead Must Be Steroid Eluting And Should Be Both Bipolar And Unipolar Configuration ? Must Have Both Active And Passive Fixation Endocardial Leads Available ? Life Time Replacement Warranty. ? Direct Presence Of Parent Companyin India (Not Only Through The Distributors ) And Company Must Provide Its Trained Technical Person For Each Implantation When Ever Required And Forfollow Up Programming When It Is Required ? Company Must Provide At Least One Programmer Exclusively To The Cardiology Dept. ? Company Must Quote Only The Latest Model Of Devices Commercially Available , Us Fda/Ce Approved Permanent Pacemakers With All Leads And Accessories ? Dddr ? Allmodes And Basic Pacing Programmable Parameters And Special Features ? Must Have Approved Atrial Tachycardia Management Algorithm & Fluid Monitoring. ? Must Have Ventricular Capture Management ? Must Have P & R Wave Measurement ? The Size Of Lead Must Be 7F Or Less ? The Lead Must Be Steroid Eluting And Should Be Both Bipolar And Unipolar Configuration ? Must Have Both Active And Passive Fixation Endocardial Leads Available ? Life Time Replacement Warranty. ? Direct Presence Of Parent Companyin India (Not Only Through The Distributors ) And Company Must Provide Its Trained Technical Person For Each Implantation When Ever Required And Forfollow Up Programming When It Is Required ? Company Must Provide At Least One Programmer Exclusively To The Cardiology Dept. ? Company Must Quote Only The Latest Model Of Devices Commercially Available , Aicd Single Chamber Pacemaker With All Leads - Us Fda/Ce Approved ,Icd With All Leads Single Chamber ? Rv Lead Must Be 9F Or Less ? All Basic Programmable Parameters ? Lead Should Be Steroid Eluting ? Should Have Both Active And Passive Fixation Leads ? Should Be Minimum 5+3 Year Warranty ? Direct Presence Of Parent Companyin India (Not Only Through The Distributors ) And Company Must Provide Its Trained Technical Person For Each Implantation When Ever Required And Forfollow Up Programming When It Is Required ? Company Must Provide At Least One Programmer Exclusively To The Cardiology Dept. ? Company Must Quote Only The Latest Model Of Devices Commercially Available , Aicd Single Chamber Pacemaker With All Leads – Dcgiapproved ,Icd With All Leads ? Single Chamber ? Rv Lead Must Be 9F Or Less ? All Basic Programmable Parameters ? Lead Should Be Steroid Eluting ? Should Have Both Active And Passive Fixation Leads ? Should Be Minimum 5+3 Year Warranty ? Direct Presence Of Parent Companyin India (Not Only Through The Distributors ) And Company Must Provide Its Trained Technical Person For Each Implantation When Ever Required And Forfollow Up Programming When It Is Required ? Company Must Provide At Least One Programmer Exclusively To The Cardiology Dept. ? Company Must Quote Only The Latest Model Of Devices Commercially Available. , Aicd Dual Chamber Pacemaker With All Leads -Us Fda/Ce Approved ,Icd With All Leads And All Accessories ? Dual Chamber ? Rv Lead Must Be 9F Or Less ? All Basic Programmable Parameters ? Lead Should Be Steroid Eluting ? Should Have Both Active And Passive Fixation Leads ? Should Be Minimum 5+3 Year Warranty ? Direct Presence Of Parent Companyin India (Not Only Through The Distributors ) And Company Must Provide Its Trained Technical Person For Each Implantation When Ever Required And Forfollow Up Programming When It Is Required ? Company Must Provide At Least One Programmer Exclusively To The Cardiology Dept. ? Company Must Quote Only The Latest Model Of Devices Commercially Available , Aicd Dual Chamber Pacemaker With All Leads- Dcgiapproved ,Icd With All Leads And All Accessories ? Dual Chamber ? Rv Lead Must Be 9F Or Less ? All Basic Programmable Parameters ? Lead Should Be Steroid Eluting ? Should Have Both Active And Passive Fixation Leads ? Should Be Minimum 5+3 Year Warranty ? Direct Presence Of Parent Companyin India (Not Only Through The Distributors ) And Company Must Provide Its Trained Technical Person For Each Implantation When Ever Required And Forfollow Up Programming When It Is Required ? Company Must Provide At Least One Programmer Exclusively To The Cardiology Dept. ? Company Must Quote Only The Latest Model Of Devices Commercially Available , Aicd Dual Chamber Pacemaker With All Leads- Us Fda/Ce Approved ,Icd With All Leads And All Accessories ? Dual Chamber ? All Basic Programmable Parameters ? Must Have Shockreduction Technology With Fluid Monitoring ? Lead Should Be Steroid Eluting ? Lead Should Be Df-1& Df-4 Compatible ? Replacement Warranty As Per Norms ? Direct Presence Of Parent Companyin India (Not Only Through The Distributors ) And Company Must Provide Its Trained Technical Person For Each Implantation When Ever Required And Forfollow Up Programming When It Is Required ? Company Must Provide At Least One Programmer Exclusively To The Cardiology Dept. , Aicd Dual Chamber Pacemaker With All Leads - Dcgi Approved, Icd With All Leads And All Accessories ? Dual Chamber ? All Basic Programmable Parameters ? Must Have Shockreduction Technology With Fluid Monitoring ? Lead Should Be Steroid Eluting ? Lead Should Be Df-1& Df-4 Compatible ? Replacement Warranty As Per Norms ? Direct Presence Of Parent Companyin India (Not Only Through The Distributors ) And Company Must Provide Its Trained Technical Person For Each Implantation When Ever Required And Forfollow Up Programming When It Is Required ? Company Must Provide At Least One Programmer Exclusively To The Cardiology Dept. ? Company Must Quote Only The Latest Model Of Devices Commercially Available , D/C Icd Single Chamber Device Mri With All Leads And All Accessories - Dcgiand Us Fda/ Ce Approved ? Should Have Advanced Feature Of Automatic Av Search, And Adjustable Av Delay Etc. ? Direct Presence Of Parent Company In India (Not Only Through The Distributors) And Company Must Provide Its Trained Technical Person For Each Implantation Whenever Required And For Follow Up Programming When It Is Required. ? Company Must Provide At Least One Programmer Exclusively To The Cardiology Dept., ? Company Must Quote Only The Latest Model Of Devices Commercially Available. , S/C Icd Single Chamber Device Mri With All Leads And All Accessories - Dcgiand Us Fda/ Ce Approved ? Should Have Labelled Projected Longevity Of > 12Years With Warranty Not Less Than 8 + 2 Years. ? Direct Presence Of Parent Company In India (Not Only Through The Distributors) And Company Must Provide Its Trained Technical Person For Each Implantation Whenever Required And For Follow Up Programming When It Is Required. ? Company Must Provide At Least One Programmer Exclusively To The Cardiology Dept., ? Company Must Quote Only The Latest Model Of Devices Commercially Available. , Us Fda/Ce Approved Implantable Loop Recorder ? Must Be Able To Detect Asystole, Brady Arrhythmia And Vt/Fvt ? Must Have The Storage Capacity Of >45 Minutes. ? Must Have Dynamic Sensing Threshold For R Wave Sensing Along With Noise Reversion ? Must Have A Patient Tool For Symptomatic Recording ? Must Have At Least 35 Months Of Longevity ? Must Be Compatible With Remote Monitoring Devices, ? Direct Presence Of Parent Companyin India (Not Only Through The Distributors ) And Company Must Provide Its Trained Technical Person For Each Implantation Whenever Required And Forfollow Up Programming When It Is Required ? Company Must Provide At Least One Programmer Exclusively To The Cardiology Dept. ? Company Must Quote Only The Latest Model Of Devices Commercially Available , Dcgi Approved Implantable Loop Recorder ? Must Be Able To Detect Asystole, Bradyarrhythmia And Vt/Fvt ? Must Have The Storage Capacity Of >45 Minutes. ? Must Have Dynamic Sensing Threshold For R Wave Sensing Along With Noise Reversion ? Must Have A Patient Tool For Symptomatic Recording ? Must Have At Least 35 Months Of Longevity ? Must Be Compatible With Remote Monitoring Devices ? Direct Presence Of Parent Companyin India (Not Only Through The Distributors ) And Company Must Provide Its Trained Technical Person For Each Implantation Whenever Required And Forfollow Up Programming When It Is Required ? Company Must Provide At Least One Programmer Exclusively To The Cardiology Dept. ? Company Must Quote Only The Latest Model Of Devices Commercially Available , Us Fda/Ce Approved Implantable Loop Recorder For Af Detection ? Must Be Able To Detect Asystole, Bradyarrhythmia, Vt/Fvt And At/Af ? Must Have The Storage Capacity Of >45 Minutes. ? Must Have Dynamic Sensing Threshold For R Wave Sensing Along With Noise Reversion ? Must Have A Patient Tool For Symptomatic Recording Along With Alerts. ? Must Be Able To Give Af Burden Reports To Monitor The Progress Of Chronic Af Patients. ? Must Have At Least 35 Months Of Longevity ? Must Be Compatible With Remote Monitoring Devices ? Direct Presence Of Parent Companyin India (Not Only Through The Distributors ) And Company Must Provide Its Trained Technical Person For Each Implantation Whenever Required And Forfollow Up Programming When It Is Required ? Company Must Provide At Least One Programmer Exclusively To The Cardiology Dept. ? Company Must Quote Only The Latest Model Of Devices Commercially Available , ? Dcgi Approved Implantable Loop Recorder For Af Detection ?Must Be Able To Detect Asystole, Brady-Arrhythmia, Vt/Fvt And At/Af ? Must Have The Storage Capacity Of >45 Minutes. ? Must Have Dynamic Sensing Threshold For R Wave Sensing Along With Noise Reversion ? Must Have A Patient Tool For Symptomatic Recording Along With Alerts. ? Must Be Able To Give Af Burden Reports To Monitor The Progress Of Chronic Af Patients. ? Must Have At Least 35 Months Of Longevity ? Must Be Compatible With Remote Monitoring Devices, ? Direct Presence Of Parent Companyin India (Not Only Through The Distributors ) And Company Must Provide Its Trained Technical Person For Each Implantation Whenever Required And Forfollow Up Programming When It Is Required ? Company Must Provide At Least One Programmer Exclusively To The Cardiology Dept. ? Company Must Quote Only The Latest Model Of Devices Commercially Available , Us Fda/Ce Approved, Biventricular Pacemaker With Atrial,Rv, Lv Leads And All Accessories Required During Implantation ? Must Have Separate Programmable Rv, Lv Lead Amplitude, Pulse Width And Vv Delay And Should Have Following Special Features ? Must Have Facility For Egm Based Optimization Of Av, Pv And Vv Delays ? The Size Of Atrial And Rv Leads Should Be 7F Or Less ? The Leads Should Be Steroid Eluting And Should Be Bipolar And Unkipolar Configuration ? Should Have Both Active And Passive Fixation Ra & Rv Endocardial Leads ? Should Have Epicardial Lead For Epicardial Lv Lead Implantation ? Replacement Warranty Not Less Than 5 Years ? Direct Presence Of Parent Companyin India (Not Only Through The Distributors ) And Company Must Provide Its Trained Technical Person For Each Implantation When Ever Required And Forfollow Up Programming When It Is Required ? Company Must Provide At Least One Programmer Exclusively To The Cardiology Dept. ? Company Must Quote Only The Latest Model Of Devices Commercially Available , Dcgiapproved, Biventricular Pacemaker With Atrial,Rv, Lv Leads And All Accessories Required During Implantation ? Must Have Separate Programmable Rv, Lv Lead Amplitude, Pulse Width And Vv Delay And Should Have Following Special Features ? Must Have Facility For Egm Based Optimization Of Av, Pv And Vv Delays ? The Size Of Atrial And Rv Leads Should Be 7F Or Less ? The Leads Should Be Steroid Eluting And Should Be Bipolar And Unkipolar Configuration ? Should Have Both Active And Passive Fixation Ra & Rv Endocardial Leads ? Should Have Epicardial Lead For Epicardial Lv Lead Implantation ? Replacement Warranty Not Less Than 5 Years ? Direct Presence Of Parent Companyin India (Not Only Through The Distributors ) And Company Must Provide Its Trained Technical Person For Each Implantation When Ever Required And Forfollow Up Programming When It Is Required ? Company Must Provide At Least One Programmer Exclusively To The Cardiology Dept. ? Company Must Quote Only The Latest Model Of Devices Commercially Available , Us Fda/Ce Approved Biventricular Pacemaker + Icd (Combo Device) With Atrial, Rv, Lv Leads And All ? Accessories Rquired During Impantation ? Must Have All Basic Programmable Parameters ? Must Have Separate Programmable Rv, Lv Lead Amplitude, Pulse Width And Vv Delay ? The Leads Should Be Steroid Eluting ? Should Have Both Active And Passive Fixation Ra & Rv Endocardial Leads ? Should Have Epicardial Lead For Epicardial Lv Lead Implantation ? Replacement Warranty Not Less Than 3 + 2 Years ? Direct Presence Of Parent Companyin India (Not Only Through The Distributors ) And Company Must Provide Its Trained Technical Person For Each Implantation When Ever Required And Forfollow Up Programming When It Is Required ? Company Must Provide At Least One Programmer Exclusively To The Cardiology Dept. ? Company Must Quote Only The Latest Model Of Devices Commercially Available , Dcgiapproved Biventricular Pacemaker + Icd (Combo Device) With Atrial, Rv, Lv Leads And All Accessories ? Rquired During Impantation ? Must Have All Basic Programmable Parameters ? Must Have Separate Programmable Rv, Lv Lead Amplitude, Pulse Width And Vv Delay ? The Leads Should Be Steroid Eluting ? Should Have Both Active And Passive Fixation Ra & Rv Endocardial Leads ? Should Have Epicardial Lead For Epicardial Lv Lead Implantation ? Replacement Warranty Not Less Than 3 + 2 Years ? Direct Presence Of Parent Companyin India (Not Only Through The Distributors ) And Company Must Provide Its Trained Technical Person For Each Implantation When Ever Required And Forfollow Up Programming When It Is Required ? Company Must Provide At Least One Programmer Exclusively To The Cardiology Dept. ? Company Must Quote Only The Latest Model Of Devices Commercially Available , Us Fda/Ce Approved, Biventricular Pacemaker + Icd (Combo Device) Without Lead • Must Have All Basic Programmable Parameters • Should Have All Parameters Shown In Related Group Of Pacemaker • Replacement Warranty Not Less Than 5 Years • Direct Presence Of Parent Companyin India (Not Only Through The Distributors ) And Company Must Provide Its Trained Technical Person For Each Implantation When Ever Required And Forfollow Up Programming When It Is Required • Company Must Provide At Least One Programmer Exclusively To The Cardiology Dept. • Company Must Quote Only The Latest Model Of Devices Commercially Available , Dcgi Approved, Biventricular Pacemaker + Icd (Combo Device) Without Lead ? Must Have All Basic Programmable Parameters •Should Have All Parameters Shown In Related Group Of Pacemaker •Replacement Warranty Not Less Than 5 Years •Direct Presence Of Parent Companyin India (Not Only Through The Distributors ) And Company Must Provide Its Trained Technical Person For Each Implantation When Ever Required And Forfollow Up Programming When It Is Required •Company Must Provide At Least One Programmer Exclusively To The Cardiology Dept. ? • Company Must Quote Only The Latest Model Of Devices Commercially Available , Us Fda/Ce Approved, Biventricular Pacemaker (Crt) Without Lead ? Must Have All Basic Programmable Parameters ? Should Have All Parameters Shown In Related Group Of Pacemaker ? Replacement Warranty Not Less Than 5 Years ? Direct Presence Of Parent Companyin India (Not Only Through The Distributors ) And Company Must Provide Its Trained Technical Person For Each Implantation When Ever Required And Forfollow Up Programming When It Is Required ? Company Must Provide At Least One Programmer Exclusively To The Cardiology Dept. ? Company Must Quote Only The Latest Model Of Devices Commercially Available , Dcgi Approved, Biventricular Pacemaker (Crt) Without Lead ? Must Have All Basic Programmable Parameters ? Should Have All Parameters Shown In Related Group Of Pacemaker ? Replacement Warranty Not Less Than 5 Years ? Direct Presence Of Parent Companyin India (Not Only Through The Distributors ) And Company Must Provide Its Trained Technical Person For Each Implantation When Ever Required And Forfollow Up Programming When It Is Required ? Company Must Provide At Least One Programmer Exclusively To The Cardiology Dept. ? Company Must Quote Only The Latest Model Of Devices Commercially Available , Us Fda/Ce Approved, Aicd Dual Chamber Pacemaker Without Lead ? Must Have All Basic Programmable Parameters ? Should Have All Parameters Shown In Related Group Of Pacemaker ? Replacement Warranty Not Less Than 5 Years ? Direct Presence Of Parent Companyin India (Not Only Through The Distributors ) And Company Must Provide Its Trained Technical Person For Each Implantation When Ever Required And Forfollow Up Programming When It Is Required ? Company Must Provide At Least One Programmer Exclusively To The Cardiology Dept. ? Company Must Quote Only The Latest Model Of Devices Commercially Available , Dcgiapproved, Aicd Dual Chamber Pacemaker Without Lead ? Must Have All Basic Programmable Parameters ? Should Have All Parameters Shown In Related Group Of Pacemaker ? Replacement Warranty Not Less Than 5 Years ? Direct Presence Of Parent Companyin India (Not Only Through The Distributors ) And Company Must Provide Its Trained Technical Person For Each Implantation When Ever Required And Forfollow Up Programming When It Is Required ? Company Must Provide At Least One Programmer Exclusively To The Cardiology Dept. ? Company Must Quote Only The Latest Model Of Devices Commercially Available , Us Fda/Ce Approved, Aicd Singlechamber Pacemaker Without Lead ?Must Have All Basic Programmable Parameters ? Should Have All Parameters Shown In Related Group Of Pacemaker ? Replacement Warranty Not Less Than 5 Years ? Direct Presence Of Parent Companyin India (Not Only Through The Distributors ) And Company Must Provide Its Trained Technical Person For Each Implantation When Ever Required And Forfollow Up Programming When It Is Required ? Company Must Provide At Least One Programmer Exclusively To The Cardiology Dept. ? Company Must Quote Only The Latest Model Of Devices Commercially Available , Dcgiapproved, Aicd Singlechamber Pacemaker Without Lead ? Must Have All Basic Programmable Parameters ? Should Have All Parameters Shown In Related Group Of Pacemaker ? Replacement Warranty Not Less Than 5 Years ? Direct Presence Of Parent Companyin India (Not Only Through The Distributors ) And Company Must Provide Its Trained Technical Person For Each Implantation When Ever Required And Forfollow Up Programming When It Is Required ? Company Must Provide At Least One Programmer Exclusively To The Cardiology Dept. ? Company Must Quote Only The Latest Model Of Devices Commercially Available , ? Us Fda/Ce Approved, Vdd/Vddr Permanent Pacemaker Without Lea ? Vdd/Vddr ? All Vdd & Single Chamber Modes And Basic Pacingprogrammable Parameters And With Following Special Features ? Should Have All Parameters Shown In Related Group Of Pacemaker ? Life Term Replacement Warranty ? Direct Presence Of Parent Companyin India (Not Only Through The Distributors ) And Company Must Provide Its Trained Technical Person For Each Implantation When Ever Required And Forfollow Up Programming When It Is Required ? Company Must Provide At Least One Programmer Exclusively To The Cardiology Dept. ? Company Must Quote Only The Latest Model Of Devices Commercially Available , Dcgiapproved, Vdd/Vddr Permanent Pacemaker Without Lead ? Vdd/Vddr ? All Vdd & Single Chamber Modes And Basic Pacingprogrammable Parameters And With Following Special Features ? Should Have All Parameters Shown In Related Group Of Pacemaker ? Life Term Replacement Warranty ? Direct Presence Of Parent Companyin India (Not Only Through The Distributors ) And Company Must Provide Its Trained Technical Person For Each Implantation When Ever Required And Forfollow Up Programming When It Is Required ? Company Must Provide At Least One Programmer Exclusively To The Cardiology Dept. ? Company Must Quote Only The Latest Model Of Devices Commercially Available , Us Fda/Ce Approved, Ddd Permanent Pacemaker Without Lead ? Ddd ? All Modes And Basic Pacingprogrammable Parameters Including Hysteresis ? Should Have All Parameters Shown In Related Group Of Pacemaker ? Life Term Replacement Warranty ? Direct Presence Of Parent Companyin India (Not Only Through The Distributors ) And Company Must Provide Its Trained Technical Person For Each Implantation When Ever Required And Forfollow Up Programming When It Is Required ? Company Must Provide At Least One Programmer Exclusively To The Cardiology Dept. ? Company Must Quote Only The Latest Model Of Devices Commercially Available , Dcgiapproved, Ddd Permanent Pacemaker Without Lead ? Ddd ? All Modes And Basic Pacingprogrammable Parameters Including Hysteresis ? Should Have All Parameters Shown In Related Group Of Pacemaker ? Life Term Replacement Warranty ? Direct Presence Of Parent Companyin India (Not Only Through The Distributors ) And Company Must Provide Its Trained Technical Person For Each Implantation When Ever Required And Forfollow Up Programming When It Is Required ? Company Must Provide At Least One Programmer Exclusively To The Cardiology Dept. ?Company Must Quote Only The Latest Model Of Devices Commercially Available , Us Fda/Ce Approved, Vvi Permanent Pacemaker Without Lead ? Vvi ? All Single Chamber Modes And Basic Pacingprogrammable Parameters ? Should Have All Parameters Shown In Related Group Of Pacemaker ? Life Term Replacement Warranty ? Direct Presence Of Parent Companyin India (Not Only Through The Distributors ) And Company Must Provide Its Trained Technical Person For Each Implantation When Ever Required And Forfollow Up Programming When It Is Required ? Company Must Provide At Least One Programmer Exclusively To The Cardiology Dept. ? Company Must Quote Only The Latest Model Of Devices Commercially Available , Dcgiapproved, Vvi Permanent Pacemaker Without Lead ? Vvi ? All Single Chamber Modes And Basic Pacingprogrammable Parameters ? Should Have All Parameters Shown In Related Group Of Pacemaker ? Life Term Replacement Warranty ? Direct Presence Of Parent Companyin India (Not Only Through The Distributors ) And Company Must Provide Its Trained Technical Person For Each Implantation When Ever Required And Forfollow Up Programming When It Is Required ? Company Must Provide At Least One Programmer Exclusively To The Cardiology Dept. ? Company Must Quote Only The Latest Model Of Devices Commercially Available , Us Fda/Ce Approved, Vvirpermanent Pacemaker Without Lead ? Vvir ? All Single Chamber Modes And Basic Pacingprogrammable Parameters ? Should Have All Parameters Shown In Related Group Of Pacemaker ? Life Term Replacement Warranty ? Direct Presence Of Parent Companyin India (Not Only Through The Distributors ) And Company Must Provide Its Trained Technical Person For Each Implantation When Ever Required And Forfollow Up Programming When It Is Required ? Company Must Provide At Least One Programmer Exclusively To The Cardiology Dept. ? Company Must Quote Only The Latest Model Of Devices Commercially Available , Dcgiapproved, Vvirpermanent Pacemaker Without Lead Vvir ? All Single Chamber Modes And Basic Pacingprogrammable Parameters ? Should Have All Parameters Shown In Related Group Of Pacemaker ? Life Term Replacement Warranty ? Direct Presence Of Parent Companyin India (Not Only Through The Distributors ) And Company Must Provide Its Trained Technical Person For Each Implantation When Ever Required And Forfollow Up Programming When It Is Required ? Company Must Provide At Least One Programmer Exclusively To The Cardiology Dept. ? Company Must Quote Only The Latest Model Of Devices Commercially Available , Us Fda/Ce Approved, Vvirpermanent Pacemaker Without Lead ? Dddr ? Mri Compatible ? Life Term Replacement Warranty ? Direct Presence Of Parent Companyin India (Not Only Through The Distributors ) And Company Must Provide Its Trained Technical Person For Each Implantation When Ever Required And Forfollow Up Programming When It Is Required ? Company Must Provide At Least One Programmer Exclusively To The Cardiology Dept. ? Company Must Quote Only The Latest Model Of Devices Commercially Available , Dcgiapproved, Vvirpermanent Pacemaker Without Lead ?Dddr ? Mri Compatible ? Life Term Replacement Warranty ? Direct Presence Of Parent Companyin India (Not Only Through The Distributors ) And Company Must Provide Its Trained Technical Person For Each Implantation When Ever Required And Forfollow Up Programming When It Is Required ? Company Must Provide At Least One Programmer Exclusively To The Cardiology Dept. ? Company Must Quote Only The Latest Model Of Devices Commercially Available , Us Fda/Ce Approved, Atrial, Rv. Lv Leads And All Accessories For Biventricular Pacemaker (Crt) A Atrial Lead B Rv Lead C Lv Lead Should Have All Parameters Shown In Related Group Of Pacemaker Direct Presence Of Parent Companyin India (Not Only Through The Distributors ) And Company Must Provide Its Trained Technical Person For Each Implantation When Ever Required And Forfollow Up Programming When It Is Required Company Must Provide At Least One Programmer Exclusively To The Cardiology Dept. Company Must Quote Only The Latest Model Of Devices Commercially Available , Dcgi Approved, Atrial, Rv. Lv Leads And All Accessories For Biventricular Pacemaker (Crt) ? A Atrial Lead ? B Rv Lead ? C Lv Lead ? Should Have All Parameters Shown In Related Group Of Pacemaker ? Direct Presence Of Parent Companyin India (Not Only Through The Distributors ) And Company Must Provide Its Trained Technical Person For Each Implantation When Ever Required And Forfollow Up Programming When It Is Required ? Company Must Provide At Least One Programmer Exclusively To The Cardiology Dept. ? Company Must Quote Only The Latest Model Of Devices Commercially Available , Us Fda/Ce Approved, Rv Lead For Aicd Single Chamber ? Must Have All Specifications Shown In Related Group Of Pacemaker ? Rv Lead For Aicd Single Chamber ? Direct Presence Of Parent Companyin India (Not Only Through The Distributors ) And Company Must Provide Its Trained Technical Person For Each Implantation When Ever Required And Forfollow Up Programming When It Is Required ? Company Must Provide At Least One Programmer Exclusively To The Cardiology Dept. , Dcgiapproved, Rv Lead For Aicd Single Chamber ? Must Have All Specifications Shown In Related Group Of Pacemaker ? Rv Lead For Aicd Single Chamber ? Direct Presence Of Parent Companyin India (Not Only Through The Distributors ) And Company Must Provide Its Trained Technical Person For Each Implantation When Ever Required And Forfollow Up Programming When It Is Required ? Company Must Provide At Least One Programmer Exclusively To The Cardiology Dept. ? Company Must Quote Only The Latest Model Of Devices Commercially Available , Us Fda/Ce Approved, Pacing Leads For Aicd Dualchamber ? Must Have All Specifications Shown In Related Group Of Pacemaker ? Direct Presence Of Parent Companyin India (Not Only Through The Distributors ) And Company Must Provide Its Trained Technical Person For Each Implantation When Ever Required And Forfollow Up Programming When It Is Required ? Company Must Provide At Least One Programmer Exclusively To The Cardiology Dept. Company Must Quote Only The Latest Model Of Devices Commercially Available , Dcgiapproved, Pacing Leads For Aicd Dualchamber ? Must Have All Specifications Shown In Related Group Of Pacemaker ? Direct Presence Of Parent Companyin India (Not Only Through The Distributors ) And Company Must Provide Its Trained Technical Person For Each Implantation When Ever Required And Forfollow Up Programming When It Is Required ? Company Must Provide At Least One Programmer Exclusively To The Cardiology Dept. ? Company Must Quote Only The Latest Model Of Devices Commercially Available , Us Fda/Ce Approved, Pacing Lead (Atrial And Ventricular) For Dddr Permanent Pacemaker Aatrial Lead Bventricular Lead ? Must Have All Specifications Shown In Related Group Of Pacemaker ? Direct Presence Of Parent Companyin India (Not Only Through The Distributors ) And Company Must Provide Its Trained Technical Person For Each Implantation When Ever Required And Forfollow Up Programming When It Is Required ? Company Must Provide At Least One Programmer Exclusively To The Cardiology Dept. Company Must Quote Only The Latest Model Of Devices Commercially Available. Company Must Quote Only The Latest Model Of Devices Commercially Available , Dcgiapproved, Pacing Lead (Atrial And Ventricular) For Dddr Permanent Pacemaker Aatrial Lead Bventricular Lead ? Must Have All Specifications Shown In Related Group Of Pacemaker ? Direct Presence Of Parent Companyin India (Not Only Through The Distributors ) And Company Must Provide Its Trained Technical Person For Each Implantation When Ever Required And Forfollow Up Programming When It Is Required ? Company Must Provide At Least One Programmer Exclusively To The Cardiology Dept. ? Company Must Quote Only The Latest Model Of Devices Commercially Available , Us Fda/Ce Approved, Pacing Lead (Atrial And Ventricular) For Ddd Permanent Pacemakera Aatrial Lead Bventricular Lead ? Must Have All Specifications Shown In Related Group Of Pacemaker ? Direct Presence Of Parent Companyin India (Not Only Through The Distributors ) And Company Must Provide Its Trained Technical Person For Each Implantation When Ever Required And Forfollow Up Programming When It Is Required ? Company Must Provide At Least One Programmer Exclusively To The Cardiology Dept. ? Company Must Quote Only The Latest Model Of Devices Commercially Available , Dcgiapproved, Pacing Lead (Atrial And Ventricular) For Ddd Permanent Pacemaker Aatrial Lead Bventricular Lead ? Must Have All Specifications Shown In Related Group Of Pacemaker ? Direct Presence Of Parent Companyin India (Not Only Through The Distributors ) And Company Must Provide Its Trained Technical Person For Each Implantation When Ever Required And Forfollow Up Programming When It Is Required ? Company Must Provide At Least One Programmer Exclusively To The Cardiology Dept. ? Company Must Quote Only The Latest Model Of Devices Commercially Available , Us Fda/Ce Approved, Pacing Leads For Vdd/Vddr Pacemakers Must Have All Specifications Shown In Related Group Of Pacemaker ? Direct Presence Of Parent Companyin India (Not Only Through The Distributors ) And Company Must Provide Its Trained Technical Person For Each Implantation When Ever Required And Forfollow Up Programming When It Is Required ? Company Must Provide At Least One Programmer Exclusively To The Cardiology Dept. Company Must Quote Only The Latest Model Of Devices Commercially Available , Dcgiapproved, Pacing Leads For Vdd/Vddr Pacemakers ? Must Have All Specifications Shown In Related Group Of Pacemaker ? Direct Presence Of Parent Companyin India (Not Only Through The Distributors ) And Company Must Provide Its Trained Technical Person For Each Implantation When Ever Required And Forfollow Up Programming When It Is Required ? Company Must Provide At Least One Programmer Exclusively To The Cardiology Dept. ? Company Must Quote Only The Latest Model Of Devices Commercially Available , Usfda/Ceapproved, Pacing Leads For Vvi/Vvir Pacemakers ? Must Have All Specifications Shown In Related Group Of Pacemaker ? Direct Presence Of Parent Companyin India (Not Only Through The Distributors ) And Company Must Provide Its Trained Technical Person For Each Implantation When Ever Required And Forfollow Up Programming When It Is Required ? Company Must Provide At Least One Programmer Exclusively To The Cardiology Dept. Company Must Quote Only The Latest Model Of Devices Commercially Available. , Dcgiapproved, Pacing Leads For Vvi/Vvir Pacemakers ? Must Have All Specifications Shown In Related Group Of Pacemaker ? Direct Presence Of Parent Companyin India (Not Only Through The Distributors ) And Company Must Provide Its Trained Technical Person For Each Implantation When Ever Required And Forfollow Up Programming When It Is Required ? Company Must Provide At Least One Programmer Exclusively To The Cardiology Dept. ? Company Must Quote Only The Latest Model Of Devices Commercially Available. , Lead For Dddr Pacemaker – Ra Lead -Dcgi&Us Fda/ Ce Approved , Lead For Dddr Pacemaker – Ra Lead -Dcgi&Us Fda/ Ce Approved , Lead For Dddr Pacemaker – Rv Lead -Dcgi&Us Fda/ Ce Approved , Lead For Ddd Pacemaker – Ra Lead - Dcgi&Us Fda/ Ce Approved , Lead For Dddr Pacemaker – Rv Lead - Dcgi&Us Fda/ Ce Approved , Lead For Vdd Pacemaker – Dcgi Approved & Us Fda/ Ce Approved , Lead For Icdpacemaker – Dcgi & Us Fda/ Ce Approved , Lead For Icddual Chamberpacemaker - Dcgi&Us Fda/ Ce Approved , Lead For Crtpacemaker –Ra Lead Dcgi&Us Fda/ Ce Approved , Lead For Crtpacemaker –Rv Lead Dcgi&Us Fda/ Ce Approved , Lead For Crtpacemaker –Lvlead Dcgi&Us Fda/ Ce Approved , Lead For Crtdpacemaker –Rvlead Dcgi&Us Fda/ Ce Approved , Lead For Crtdpacemaker –Ralead Dcgi&Us Fda/ Ce Approved , Lead For Crtdpacemaker –Lvlead -Dcgi&Us Fda/ Ce Approved , Epicardial Pacing Lead – Rv Lead , Epicardial Pacing Lead – Ra Lead , Latex Surgical Gloves (Powdered) – Thickness -0.135 Mm • Natural Rubber Latex , Beaded Cuff, Protein Content Level: <200?G/Dm2 (As Per Astm D 5712) • Size – 6. 6.5, 7, 7.5, 8 , Latex Surgical Gloves (Powder Free) – Thickness -0.135 Mm • Natural Rubber Latex , Beaded Cuff, Protein Content Level: <50?G/Dm2 (As Per Astm D 5712) • Size – 6. 6.5, 7, 7.5, 8 , Silicon Coated Directly Jointed Sus & Sitinol Shaft Wire 0.7 Gm, Duo Core Technology – Ce Approved , Silicon Coated Directly Jointed Sus & Sitinol Shaft Wire – 0.7 Gm - Duo Core Technology Dcgi Approved , Silicon Coated Directly Jointed Sus & Sitinol Shaft Intermediate Wire 1 Gm,Duo Core Technology – Ce Approved , Silicon Coated Directly Jointed Sus & Sitinol Shaft Intermediate Wire – 1 Gm -Duo Core Technology Dcgi Approved , Stainless Steel Grinded, Core Wire,One Core Construction,Platinum Tip (3 Cm)- 195 Cm,Standard / 1.2 Gf, Intermediate / 1.0 Gf, Floppy / 0.8 Gf, Extra Floppy / 0.6 Gf – Ce Approved , Stainless Steel Grinded, Core Wire,One Core Construction,Platinum Tip (3 Cm)- 195 Cm,Standard / 1.2 Gf, Intermediate / 1.0 Gf Floppy / 0.8 Gf, Extra Floppy / 0.6 Gf – Dcgi Approved , Nitinol Distal Core Wire -Unicore- Both Nitinol - Le And Multiple Stainless-Steel Conjugation - Ultra-Low (<0.7 G) – 3-6 Gm Cto Wire - Ce Approved , Nitinol Distal Core Wire – Unicore -Both Nitinol - Le And Multiple Stainless-Steel Conjugation - Ultra-Low (<0.7 G) – 3-6 Gm Cto Wire - Dcgi Approved , Controlled Vascular Lumen Expansion Regulator System – Ce Approved , Controlled Vascular Lumen Expansion Regulator System – Dcgi Approved , Post Vascular Intervention Coronary Cvi-Balloon Catheters - Semi Crystalline Polymer Pressure Limit – 14-20 , Pre Vascular Intervention Coronary Cvi-Balloon Catheters - Semi Crystalline Co-Polymer Eft Shaft Pressure Limit – 7-14 , Vascular Intervention Coronary Cvi Drug-Coated Balloon -Lux Coating Technologyblends Paclitaxel With Bthc , Group – B (Interventional Neurology) , Disposable Luer Lock Syringe • Should Be Compitable With Cuanoacrylate. • Should Be Available In 1 C.C/2C.C/3C.C/5C.C/10 C.C/20 C.C/ 50C.C , Picard Catheter • In Various Standard Lengths And Curves • 035-038 Compatible 100 Cm Long , Amplatz Catheter : • In Various Standard Lengths And Curves • 035-038 Compatible 100 Cm Long , Carotid Angiopalsty Balloon Catheter(Over The Wire/Rapid Exchange) • Should Have Hydrophilic Coating • Should Be Available In Various Outer Diameters And Balloon Lengths And Various Shaft Lengths , Carotid Self Expendable Stents • Should Be 0.018” Compatible • Should Be Over The Wire And Rapid Exchange (Otw/Rx) • Should Be Available In Various Diameters And Length • Should Be On A Shaft Length Of 80-140 Or Above Length , Poly Vinyl Alcohol (Pva) Particles For Pre-Operative Tumour Embolization , Ethyl Vinyl Alcohol Embolic Agent (With Dmso) For Avms/Avfs/Davfs/Tumor-Embolization , Super Selective High Flow Infusion Catheters - For Cerebral/ Spinal Avms (Compitable With Dmso) Outer Diameter 2.7/1.5F, Distal Id- 0.013”, Usable Length At Least 165 Cm, , Super Selective High Flow Infusion Catheters - For Cerebral/ Spinal Avms (Compitable With Particulate Embolic Agents Such As Pva Particles) , Distal Acess Catheter For Co-Axial Systems • In Various Standerd Length • Size5fr 6Fr 7Fr • 0.035 To 0.070, 0.074 Inner Lumen , Baloon Topped Guiding Catheter • Size 6Fr 7Fr 8Fr 9Fr 10Rf , Special Micro Guidwire With Torque Device For Use With Micro Catheters • Size 0.007” – 0.014” , Special Micro Guidwire (Exchange Length 260-300Cm)With Torque Device For Use With Micro Catheterssize 0.010” – 0.014” , Electrolyte Detachable 3-D Type / Halical / 360 Coils For Intracranial Aneurysm Treatment – Bare Platinum Coils , Electrolyte Detachable 3-D Type / Halical / 360 Coils For Intracranial Aneurysm Treatment – Coated / Bio Active Platinum Coils , Selective Infusion Microcatheter For Intrecranial Aneurysm Treatment With 2 Tip Markers • Outer Diameter 2.1/1.7F And Id. 0.017” , Selective Infusion Microcatheter For Deploynig Intracranial Device Should Be Compitable For Stents Flow Diverters Or Stent Retrivers Of Various Sizes , Power Supply Acessiries And Connecting Cables For Detachable Coils , Open Cell Design Intracranial Stents For Stent Assisted Coilling Of Aneurysn • Should Have Open Cell Design • Should Be Available In Various Size And Diameter , Flow Diverter For Intracranial Aneurism Treatment , Single Lumen Baloon Angioplasty Catheter For Intrecranial Use , Hybrid Cell Design Intracranial Stents For Sten Assisted Coilleng Of Aneurusm • Should Have Open Cell Design • Should Be Available In Various Size And Diameter , Revasculization Device For Mechenical Thrombectomy , Thrombus Suction Catheters For Clot Retrivals From Carotid And Vertibtals , Infusion Catheter For Moterised Fragmentation And Suction For Clot Retrival With Seperater , Stent Retrival For Thrombectomy , Web Device Intraspecular – Available Assorted Size , Pressure Saline Bag 1000Ml , Pressure Infusion Reusable Bag 1000Ml
Basic Detail
Tender No 331
Bidding Type Tender
Location
City kota
State Rajasthan
Key Dates
Publish Date 07 Aug 2025
Submission Date 14 Aug 2025
Open Date 16 Aug 2025
Finance
Tender Value 39 Crore
Tender Fee 1000
EMD 78 Lakhs
Exemption Available
Document List
b4636475-b16a-4fb6-91c4-8815fa3eeb39.html
BOQ_868315.xls
cathlab.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Aug 07, 2025
11:30 IST

Tender Published

Tender notice published.

Completed
Aug 11, 2025
18:00 IST

Corrigendum-1 Issued

Clarifications on tender conditions and amendments issued.

Completed
Aug 11, 2025
18:00 IST

Corrigendum-2 Issued

Clarifications on tender conditions and amendments issued.

Completed
Aug 14, 2025
18:00 IST

Corrigendum-3 Issued

Clarifications on tender conditions and amendments issued.

Completed
Aug 14, 2025
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Completed
Aug 16, 2025

Bid Opening Date

Technical bids will be opened and evaluated.

Completed

Tender Documents

Download All (ZIP) ↓
html

b4636475-b16a-4fb6-91c4-8815fa3eeb39.html

xls

BOQ_868315.xls

pdf

cathlab.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender

TenderDetail
Loading tenders