Tender For Repair And Maintenance Work Of P.Way As Required In Metro Line Of Jmrc From Mansarovar To Badi Chaupar Metro Station Including Of Mansarovar Depot. - 1 Schdule Part-A: Non-Bsr-Items 2 Thorough Cleaning Of Track Beds From Mansarovar To Chand, jaipur-Rajasthan

Tender For Repair And Maintenance Work Of P.Way As Required In Metro Line Of Jmrc From Mansarovar To Badi Chaupar Metro Station Including Of Mansarovar Depot. - 1 SCHDULE PART-A: NON-BSR-ITEMS 2 Thorough Cleaning of Track Beds from Mansarovar to chandpoleincluding Mansarovar DepotD/End excluding station platform area. Disposal of rubbish,muck etc.out of site has to be done by contractor to the dumping ground approved by Corporation with contractors own labour materials,tools and plants complete etc.(The work has to be done once in 03 months as per approval of engineer incharge) 3 Cleaning of hand rails of viaduct except platform area From MSOR-CDPE along UP/DN Line.(The work has to be done once in 03 months as per approval of engineer incharge) 4 Along Up line 5 Along Dn line 6 Thorough cleaning of track beds, track side area, drain and firehydrant pipe in BOX/ boredTunnel excluding station platform locationwith brush, broom, etc. as required and disposal of rubbish, muck etc. out of Tunnel has to be done by contractor to the dumping ground approved by JDA/JNN with contractors own labour materials,tools and plant etc. The work has to be done at a frequency of once in 3 Month or asdirected byEngineer Incharge. 7 For SG corridor (As per Schedule) 8 Inside cleaning of Box Type Prestressed RCC Segmental Girder from Mansarovar Dead end to Sindhi Camp Ramp using the proficientlabour as per the directions of Engineer-In-Charge including all T&P and Consumables in Night Shift. 9 Anti Corrosive Painting of UIC-60 Rails in three coats using neromastic 4000 or equivalent in Priming Coat and first and second paint coats in station area and tunnels. The work Includes opening & retightening of rail fastening before and after the primimg coat and forst coat using the bolt tightening machine along with wire brushcleaning, dry cloth cleaning& kerosene washing before the priming coat. The bolt tightening machine shall be provided by the employer whereas all the consumables such as petrol, mobile oil etc operate these machine shall be provided by the contractor. (Dry Finished Thickness of Paint shall be > 300 microns and is to be painted by brush as per the direction of Enginee-In-Charge) 10 In Night Shift 11 Horizontal/Vertical core cut up to 50mm dia and 200mm to 600mm Length/Depth in PCC/RCC as per directions of Engineer-in-Charge. 12 Dressing of Shoulder Ballast (one side) of track as per LWR profile as per directions of Engineer-in-Charge. 13 Picking up of Slacks as per the directions of Engineer incharge (In Day Shift) 14 Plain Sleeper 15 Point and Crossing 16 Thorough attention of track fittings as per direction of Engineer In-charge. 17 Cutting of old dry grease on curves & Turnout as per directions of Engineer in charge 18 Gauge Correction of Track by using ecentric Bush as per the site requirement as per the direction of Engineer in charge. 19 Supply and installation of Fouling mark as per direction of Engineer in charge 20 Providing and fixing of curve indication board with laminated high intensity retro-reflective tape 3M with data as per the direction of Engineer in charge. 21 Supply and installation aluminum sheet (200mmx300mmx2mm) with laminated high intensity retro-reflective tape 3M having data for signage board. 22 Providing and inserting 12mm dia galvanised steel injection nipple in honey comb area and along crack line including drilling of holes of required diameter(20mm to 30mm) up to depth from 30mm to 80mm at required spacing and making the hole & crack dust free by blowing compressed air ,sealing the distance between injection nipple with adhesive chemical of approved make and allow it to cure complete as per direction of engineer-In-Charge. 23 Providing and injecting epoxy based grout material Conbextra EP10 of M/s Fosroc or equivalent in the RCC plinth of track as per direction of engineer incharge. 24 Execution of in-situ glued joint as and when required as per direction of Engineer in charge 25 Supply of Grouting Material Sikadur 53UF (11 Kg Packets) grout or equivalent as per drection of Engineer in Charge. 26 Supplying 65mm stone ballast as per RDSO specification and stacking of the same for measurement in JMRC depot as per direction of Engineer in-charge. 27 Providing workmen proficient in track works as per requirement of Engineer-In-Charge (Semi Skilled) 28 In Night Shift 29 In Day Shift

INR 1180 /-

INR 185217.0 /-

INR 92.60 Lakhs /-

FileName	File Description	File Size
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB