Tender For Construction Of Yoga Shed, Road Track And Other Civil Repairing Work In Ganesh Udyan - 1 Dismantling kerb stone by manual means and disposal of dismantled Material with all lifts and upto a lead of 1000 mtrs. (MoRTH specification : Clause 202) 2 Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed with in a lead of 50 meter. All kinds of soils 3 By Mannual Means 4 Carriage of materials ie Earth, Sand, Lime, Morrum manure or sludge From site including stacking, loading and unloading etc complete with all lead and lift.( For 5 Km) 5 Construction of Jogging work on existing track using clay sand mix (design as approved by Rajasthan sports council) including grinding of clay and mixing by mechanical means preparation of bed. Laying clay mix mechanically (hydraulic system) and compacting using roller making surface leveled and even including cost of water hire charges all T&P complete in all respect as per direction of Engineer in charge. 6 Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level. M10 grade Nominal Mix 1: 3: 6 (1 cement : 3 coarse sand : 6 graded stoneaggregate 20mm nominal size). 7 Random Rubble stone masonry for with hard stone in foundation and plinth in Cement Sand mortar above 30 CM thick wall in: 8 Cement Mortar 1:6 ( 1-Cement : 6-Sand). 9 Random Rubble stone masonry for with hard stone in super structure aboveplinthlevel and up to three levelabove 30 CM thick wall in: Cement Mortar 1:6 ( 1-Cement : 6-Sand). 10 Pointingonstonemasonryincementsandmortar 1:3 (1 cement : 3 sand) : 11 Providing and laying damp-proof course with cement concrete grade M-150 (1 : 2 : 4) mortar prepared with 1% solution of water-proof compound complete as per specification . 12 Plaster on new surface on walls in cement sand mortar 1:6including rackingofjointsetc. complete fine finish : 13 20mm thick . 14 Supply & fixing of M-20 grade precas cement concrete Kerb or Dand upto 60 er length over 20 mm thick base of cemen mortar 1:6 including jointing earth work pointing & jointing withcement mortar 1:4 of size 15 20x25cm 16 Supply and fixing of ornamental garden bench in height 27 and length 5 main frame are made of Cl legs size 27x2x15 complete with MS rectangular pipe 5x21/2x1. 17 Supply & Stacking good soil of earth at site complete including loading unloading & Transportation etc. 18 God soil of earth 19 Spreading of manure. good earth in required thickness (cost of manure and good earth to be separately) 20 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade: 21 Dismantling of flexible pavements and sposal of dismantled materials upto a lead of 100 m. stacking serviceable and unserviceable materials separately as per MORTH Specification Clause 202 By Mechanical Means Bituminous Courses & Granular Courses 22 Maintenace of bituminous surface road Patch repair on already filled pot holes with 75 mm BM with 20 mm premis carpet and seal coat Type B as per drawings and MORTII specification Clause 3004.2 23 Maintenace of bituminous surface road Repair to pot holes and removal of loose material. trimming of sides, cleaning of surface by providing tack coat. 20 mm thick pre-mix carpet and seal coat type B as per MORTH specification Clause 3004.2 24 Water Bound Macadam Sub-base/base with Stone Screening WBM Grading 2 Providing. laying. spreading and compacting stone aggregates of specific sizes 10 water bound macadam specification including spreading in uniform thickness. hand packing. rolling with smooth wheel roller 80 100 kN in stages to proper grade and camber. applying and brooming, stone screening to fill-up the interstices of coarse aggregate. watering and compacting to the required density Grading 2 as per MORTH Specification Clause 404. using Crusher borken aggregate By Mechanical Means 25 Prime Coat Providing and applying primer coat with Bitumen emulsion (SS-1) prepared surface of granular on base (Stablised soil baes/Crusher Run Macadam) including cleaning of road surface and spraying primer at the rate of 0.90-1.2 kg/stum using mechanical means as per MoRTII Specification Clause 502. 26 Tack Coat using Bitumen (NG-10) Prosiding and applying tack coat with Bitumen VG-10 using bitumen pressure distributor at the rate of 0.30 to 0.40 kg per sqm on the prepared bituminous surface eleaned with Hydraulic broom LIN per MORTH Specification Clause 501 and IRC-16-2008 27 20mm thick Open-Graded Premix Carpet sing Bituminous (Viscosity grade/modified (bitumen) Binder Providing. laying and rolling of open-graded premis carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using Viscosity grade bitumen or emulsion to required line, grade and level to serve as wearing course on previously prepared base, ineluding mising in a suitable plant, laying and rolling with a three wheel 80-100 kN static roller capacity, finished to required level and grades to be followed by seal coat of either Type A or Type B or Type C as per MoR III Specification Clause 510. 28 Case-11 By Mechanical MeansBitumen (VG-30) 29 SealCoat Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type A. Type B and Type C as perMoR111 Specification Clause 511 30 By Mechanical MeansBitumen (VG-30)Case Type A 31 Marking Centre Line and stop lines ete. on road as per IRC pattern with thermoplastic paint of approved quality and make without glass beads laid on the road surface at temperature 160 C with a special applicator machine complete with a special applicator machine complete with labour material and traffic diversion arrangements. 32 Providing and Fixing corrugated colour G.l sheet having thickness 0.50mm rooting fixed with G.L.J or L Hooks bolts and nuts 8mm dia meetr with bitumen and G.I Limpet washers or with G.1 Limpet washers filled with white lead and including over lapping of sheet complete ( upto a pitch of 60 degree) & excluding the cost of purlins rafters and trusses ete complete in all respect. 33 Centering & shuttering with plywood or steel sheets includingstrutting, propping bracing both ways with steel props andremoval of formwork for upto floor five level for : 34 Suspended floors, roofs, landings, staircases, balconies,girders, cantilevers, bands, coping bed plates, anchor blocks,sills, chhajjas, lintel, beam, plinth beam etc. 35 Steel work in built up tubular trusses including cutting, hoisting (height upto 10 m)fixing in position and applying a priming cout of approved steel primer, welded and bolted including special shaped washers ete. complete. 36 Hot finished welded type tubes. 37 Providing and fising steel gate, grating and grills made of angles, tees, square bars. flats.or black pipe with holdlast and fittings complete as per design and drawing including cutting welding and fabrication with proming coat of red oxide 38 peoviding and fabricating reinforcement for C.C. work including straightening, cutting. bending. placing in position and binding (including cost of binding wire) all complete up to floor five level.hot and cold bars (Conforming of relevent IS code) 39 Providing and laying in position specified grade of cementconcrete for RCC structural elements upto floor five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and einforcement for Beams, suspended floors, roofs, griders having slopes up to 15º, landings, balconies, shelves, chajjas, lintels, bands, plain windows sills, staircases and spiral staircases etc. M20 grade Nominal Mix / Design Mix
