Bid Documents For Annual Rate Contract For Various Building Activity Related To And Other Work South Zone Of Porbandar Municipal Corporation Of South Zone, Porbandar, Dist.: Porbandar.-1.00 Basic Rate of Materials 2.00 Basic Rate Input of Labour 3.00 Basic Rate Input of Carriage 4.00 Basic Rate Input of Hire Charges 5.00 Basic Rate Input of Extra - item 6.00 Chapter No. 2 - Mortars 7.00 Chapter No. 4x - Earth work (Executed with Mechanised Efforts/Machinaries) 8.00 Chapter No. 4 - Earthwork (Executed with Manual Labour) 9.00 Chapter No. 5 - Concrete Work 10.00 Chapter No. 6 - Brick work 11.00 Chapter No. 7 - Stone Masonary 12.00 Chapter No. 9 - Form Work 13.00 Chapter No. 10 - Wood Work & Joinery 14.00 Chapter No. 11 - Steel, Aluminum & Iron Work 15.00 Chapter No. 12 - Building Hardware16.00 Chapter No. 13 - Glazing 17.00 Chapter No. 14 - Paving & Floor Finishes 18.00 Chapter No. 15 - Roof Coverings 19.00 Chapter No. 16 - Ceiling & Lining 20.00 Chapter No. 17 - Plastering & Pointing 21.00 Chapter No. 18 - White Washing, Color Washing, Distempering & Other Finishing 22.00 Chapter No. 19 - Painting & Polishing 23.00 Chapter No. 20 - Demolition & Dismantling 24.00 Chapter No. 21 - Repairs to Buildings 25.00 Chapter No. 22 - Miscellaneous Building Items 26.00 Chapter No. 23 - Water Supply, Plumbing & Sanitary Fittings 27.00 Chapter No. 24 - Drainage & Sewerage Item 28.00 Fixing of wooden door window in masonry as per instruction 29.00 Repairs to flush door, cupboard shutters, furniture by removing the damaged ply wood sheet portion & replacing in with new 4 mm thick ply wood including necessary s.s. fixtures and fastings and other necessary accessories and refixing it is at its original position making it functional, good looking including necessary oil paintings, french polishing etc. 30.00 Repairs to 6mm thick plywood partition by repairing or replacing necessary plywood and non teak cross battern etc. including oil painting and making it good & functional (rate including all the labour materials tools etc) 31.00 providing and fixing precast c.c. door frame in masonry labour including labour and materials 32.00 Repairs to steel frame by necessary straining of frame & welding or required to make it functional & good looking 33.00 Repairs to steel shutters by necessary straining of frame & welding or required to make it functional & good looking 34.00 servicing of rolling shutters including cleaning, oiling, greasing and make functioned such away that it com. Easily closed or opened 35.00 providing and fixing rolling shutters of approved make maid of 80mm dia M.S. latch as per the instruction with standard pattern including pipe shaft, back of plate side, channel locking arrangement inside & outside flood cover, spring with two coat of oil painting and a coat of primer (rate includes all labours, materials, tools, plants, equipments, etc.) 36.00 Providing and fixing in position callapsible steel shutters with vertical channels 20*10*2 mm braced with flat iron diagonals 20*5 mm size with top and bottom rails of T_rin 40*40*6 mm with 38mm dia, steel pulleys complete with bolts, nuts, locking arrangements, stoppers handles including applying a priming coat of read lead paint. ( upto 10 ton) 37.00 Providing & laying both side POLISHED KOTA STONE SHELVES to C.B. with making the grooves in the walls and fixing the kota stone finishing the same with cement mortar 1:2 etc, complete 38.00 Water proofing of leakage terrace by using necessary approved water proofing chemicals including cleaning of terrace ( with all labour and material) 39.00 Repairs to manglore tiles shed including replacing broken tiles, damaged batten pati, and necessary cement vata/lodhia as directed. excluding cost of cement & principal post rafter ) 40.00 Repair to existing damaged door by providing and fixing 22 guage alluminium foil sheet with help noils screews and making it good and functional. 41.00 Cleaning of septic tank by and disposing of out side nagarpalika limit disposing of sludge as directed, etc. 42.00 Providing and fixing precast R.C.C Manhole cover of size 60*45 cm, cm thick with necessary handles 43.00 Cleaning of over head tank, like RCC tank, masnory tank, steel tank and sintex tank asbestos cement tank. 44.00 Cleaning of open compound jungle cutting vegetation, grass shrubs plants, etc including disposing of the waste and stacking the useful material 45.00 Collecting the waste spread on the open ground/compound by sweeping and disposing of the same by contractor own vehicles. Providing and fixing PVC 6 cover and frame of following size 46.00 (A) size 600* 450 mm 47.00 (B) size 600*600mm 48.00 (C) size 300*300mm 49.00 Providing and fixing corrugated semitransparent FRP sheeet 1.50mm roofing fixed with GI J or L hooks belt and nets 8mm dia with bitumen washing filled with white lead complete excluding cost of purlins, rafters and trusses. 50.00 Providing and fixing PVC carpet 1.30mm thick synthetic of proved brand and manufacture requried shade as specified including using suitable rubber adhesiv solution of approved quailty including cost of material and labours 51.00 Providing and fixing standard quilty hydrulic door closer ( rate including all labour and material cost) 52.00 Providing standard quality magnetic door catcher as approved by the engineer in charge. ( rate including all labour & material) 53.00 Providing and fixing standard quailty mortice lock as approved by the Engineer in charge. ( rate including all labour & material) 54.00 Providing and fixing 35mm thick,Fully panelled shutters for door, window in indian teak wood on exiting frame with S.S. butt, hinges fixing with screws including all necessary fixtures of S.S. as per instruction with two coat of enamel paint a coat of primer making it good.(SS Fitting) 55.00 Providing and fixing 35mm thick partly panelled partly glazed shutters for door,window in indian teak wood on exisitng frame with S.S. butt,hinges fixing with screws including all necessary fixtures of S.S as per instruction with two coat of enamel paint a coat of primer making it good (S.S. fittings) 56.00 Providing and Fixing 35mm thick, fully glazed shutters for door, window in indian teak wood on existing frame with I.S.S Butt,Hinges fixing with screws including all neccssary fixtures of S.S as per instruction with coat of enamel paint a coat of primer making it good. (S.S. fittings) 57.00 Labour work for providing wooden frame from exiting dismentalled wooden material like rafters, purlins, king past any type of wood including a wing , finishing and making good of requried size for door and window frame including applying one coat of priming coat. 58.00 Providing wooden shutter for door & window frame exiting wooden material like rafters, purlins, king past any type of wood including a wing , finishing and making good of requried size for door and window frame including applying one coat of primimg coat. 59.00 Providing and fixing M.S iron ornamented gate of requried pattern with M.S. angle section with M.S squre bars, fluts including providing and fixing hold fasts, hinges roovas including one coat of primer and two coats of oil painting etc. comp 60.00 Provoding & fixing PVC mosqitoes proof net of approved brand including Providing necessary well crose by seuring ma. 61.00 Repairs to collepsible gates by removing from walls repairs and refixing after requirs including cutting of damged channels, roller etc. & replacing new channels and rollers and also including two coats of oil paint making it good. 62.00 Repairs to doors and windows shutters incl.required of broken components of teak wood and providing missing components of teak wood including providing necesssary missing S.S fixtures and painting to match with existing colour etc. comp 63.00 Providing and Fixing Three Track Anodized Aluminium Section 1.5 mm thick three track framework 92*31.75*1.50@1.06 kg/rmt size and 40*18 thick shutter frame with 5mm mirror effect glass 64.00 Providing and Fixing gate using G.I rectangular pipe and G.I sheet as per direction and drawing with necessary iron haldraf, iron hinges, with packing arrangement including one coat of red road iren & two coat of oil painting etc. complete 65.00 Providing and fixing flush door shutter soild core construction with frame of first class hardwood with cross board and face veneer or plywood face panel sand laminated both side 1 mm sunmica site as per direction including SS butt, hinges with necessary screw and all fittings of SS etc. completed 66.00 Providing and fixing PVC roof shade @1.5mm thick for generator including necessary vertical G.I Squre / rectangular pipe framing with necessary vertical GI squre pipe as per as directed including one coat of oil painting etc. completed 67.00 Providing and Laying Granite stone slab 18 to 20mm (AVG) thick for jam seal as per design including full molded round front edge in trade of steps laid on 20mm thick cement mortar 1:6 (1-cement:6-coarse sand) jointed with grey cement slurry including rubbing and polishing etc. complete 68.00 Providing and fixing all size of parking 8mm vetrified tiles base of cement mortar 1:6 ( 1: cement-6: coarse sand) on any surface as fixing on exisitng flooring by adhesive material and jointed with colour cement slurry and finished with flush painting,clearing the surface etc. complete 69.00 Repair to exisitng damaged alluminium window by providing and fixing damaged part like lock, pully, shetter, glass, screw, frame etc work completed 70.00 Providing and fixing 35mm thick shutters for door, window and clear story windows including anodised alluminium butt hinges with necessary screws (A) indian Non teak wood (i) fully panelled. 71.00 Providing and fixing 35 mm thick shutters with frame 10 x 7 cm for door, window and clear story window including anodised alluminium butt hinges with necessary screws (A) Indian Non teak wood (i) fully Panelled 72.00 tractor on hire per trip charges with trailor diesel, driver necessary equipment within 5 Km are 73.00 Providing and fixing colour (G-4) Anodized Alluminium section partition with door shutter 63.50*38.10*1.2mm with Glass 5mm thick and acralic sheet 4mm thick door frame 75*25mm ( Door vertical +door top+door middle+door,closer, locking arrangment things handle etc complete as per EIC 74.00 Providing and fixing tuffon glass door of 12mm thick ( frosting) with locking , handle, auto matic door closer, floor spring etc complete as per EIC 75.00 Providing and fixing table top 12 to 15 mm thick with having top smooth surface & bottom rough surface (china white colour) complete with all side fully molding etc complete as per EIC. 76.00 Providing and laying 1.5 mm thick PVC carpet flooring with all taxes & duties packing forwarding loading, unloading , installation etc. complete as per EIC. 77.00 Providing and Fixing Zebra white curtain with fabric material and with roller mechanism including vertical movement by using thread mechanic colour as per selection and rate including the cost of material and fitting at site as per direction of EIC 78.00 Providing and fixing MDF wooden flooring with using 2mm foam and 0.5 mm PVC in floor with 8 mm thick approved make and shade wooden flooring, including T profile and reducer door profiles approved as per the instruction of engineer in charge etc. complete or as directed. 79.00 Providing, fixing, installation and commissioning at all height false ceiling of 12 mm thick BWP grade plywood IS 710 including providing and fixing of entire frame work made of special teakwood having size 75 mm x 38 mm and consisting of angle cleats of size 25mm x 20 mm at 600 mm / centre to centre on fixed to the ceiling with dash fastner 12.5mm dia x 40mm long with 6 mm dia. bolts to the angle hungers of 25 x 25x 5 mm of required length, an other end of angle hanger being fixed with nuts and bolts to 6.1 channels 45 mm x 15mm x 0.9mm running at the @ of 1200mm centre to which the every junction including hanging with roof, with 25mm long drive- all screws @ 230mm interval including joining and fixing to a flush finish. The wooden ceiling will be finished with the approved make 4 mm thickness teak veener finished with two coats of sealer and two coats of melamine spray polish as per directions and also including the cost of making openings for light fittings , grills , diffusers , cut outs made with for AC frame of suitably fixed finishing of all joints neatly to proper line and levels including providing of additional frame work for electricals fixtures including giving trap doors where ever required. Diffusers, cutouts for fire smoke dectactor etc. as per the specification approved by architects including necessary scaffolding supports, suspenders etc. The quoting price should be inclusive of all types of taxes & duties ,packing, forwarding, loading, unloading, installaion. As per choice of users department and Concern officers in charge as directed by the Engineer. 80.00 Providing & Fixing 95 MM thickness decorative door with min. 95 mm (+or-2mm) thk. The entire structure should be made with 63mm × 38mm × 1.45mm thick aluminum section framework 450 mm × 450mm C or C both vertically and horizontally along with 50 mm glass wool. Having both side 12mm thick ply. with 50 mm glass wool. Having both side 12mm thick ply with both side 4.0mm thk veneer of approved shade with wooden frame as per design and detail drawing. The edge to be lipped on all sides with 12mm thick teak wood beading. Both side exposed veneer and wood surfaces to be finished with minimum 3 coats of monocoat polish and other side PU finish. rate shall include necessary locking system, floor spring, teakwood handle, and other miscellaneous hardware. complete as per detail drawing and instruction of Architect/ engineer in charge. (veneer basic rate 1200 per sqm) 81.00 Providing & Fixing wall paneling based on aluminum grid framing (50 mmx25 mm of 16 gauge) of grid size 600 mm x600 mm by aluminum sections of said size. Grid frame is covered with 18 mm thick marine plywood and top surface covering by 4 mm thick veneer finished with PU polish. Wall paneling have suggested deep C groove and suggested deep nieces. All grooves are finished with 4 mm thick veneer and PU matt polish. Basic rate of veneer is 1183.60 per sq mt. All exposed surfaces covered with 4 mm thick veneer of approved shade complete with PU polish as instructed by Architect/consultant/Engineer In charge. Complete with all hardwares like s nails, ss screws, adhesives etc. shown in detail drawings. Contractor has to provide suggested openings in paneling, all necessary cut outs for Electrical works & no extra payment shall be made for it. Amount shall be paid only for the Partition between the False Ceiling & Flooring. 82.00 Providing and fixing Wooden blinds with aluminum section head rail having width of 31.5 mm and height of approx 0.087gsm/r.ft with control unit operating with endless chain and selected fabric is fixed on front side of selection with velcrow and fixing slightly lower than the previous one to minimum the shade is raised and stack depth is approx 280 mm. 83.00 Providing & Fixing wall paneling based on aluminum grid framing (50 mm×25 mm of 16 gauge) of grid size 600 mm ×600 mm by aluminum sections of said size. Grid frame is covered with 18 mm thick marine plywood and top surface covering by 4 mm thick veneer finished with PU polish. Wall paneling have suggested deep C groove and suggested deep nieces. All grooves are finished with 4 mm thick veneer and PU matt polish. Basic rate of veneer is 1183.60 per sq mt. All exposed surfaces covered with 4 mm thick veneer of approved shade complete with PU polish as instructed by Architect/consultant/Engineer In charge. Complete with all hardwares like s nails, ss screws, adhesives etc. shown in detail drawings. Contractor has to provide suggested openings in paneling, all necessary cut outs for Electrical works & no extra payment shall be made for it. Amount shall be paid only for the Partition between the False Ceiling & Flooring. 84.00 Providing and Fixing Anodised alluminium frame ( jindal door section NO 195 52 Weight not less than 1.1 Kg.rmt) including wooden insert for durable grip for door hinges size fixed by SS hinges with single shutter of factory made & stamped IS 12823 Grade one ,type one 35mm thick solid core, melamine faced, three layered resin, flushed door having decorative lamination on both side & U type 2mm thick 35mm*35mm specially shaped molded colored anodized aluminium beading fixed around the door with fixture and labour as aproved and directed by EIC etc complete 85.00 Providing and fixing Colour Anodized alluminium section lovered ventilator with frame size 127.00*38.10*1.35 mm of any approved brand in 5mm thick ground glass and colour anodised alliminium lovers fixtures holdface etc completed As directed and approved by EIC etc complete 86.00 Providing and fixing standard partition section of alluminium section of size 63.50*38.10*1.95 mm ( of jindal section no 4605 or equivalent , @ wt 1.094 kg/Rmt with colour anodized alluminium frame with 5mm thick transparent glass at top and 5mm bakelite sheet at bottom with fixture and labour as approved and directed by EIC etc complete 87.00 Providing and fixing flush door shutter of 25mm thick solid core construction with laminated both side, including anodised alluminium butt hinges, handle morties lock, SS aldrop, SS stopped and with necessary fixture as directed and approved by EIC etc complete. 88.00 Repairs to door and window shutters including requried of broken components of teak wood including providing necessary missing SS fixture and painting to match with existing colour etc complete 89.00 Providing and fixing G.I tube of size 15*15 mm with cutting , welding, hoisting with necessary support and fixing etc complete as per EIC 90.00 Providing and fixign Gate using M.S pipe as per direction and drawing with necessary iron haldraf iron hinges with packing arrangement including one coat of red road iren and two coat of oil painting etc complete 91.00 Water proofing of leakage terrace by using necessary approved water proofing chemical ( Approved brand and directed by EIC) in horizontal as well as vertical surface in two coats and repair exexting crack and incluiding cleaning the exesting surface free from dust, debris, weeds and other material. 92.00 Providing and fixing Alluminium section 1.5 mm thick Window shutter with 40*18 mm thick shutters with Mosquito Proof SS jali with complete accessories ribbin etc completed 93.00 Removing the existing plaster i.e. in Lime or cement of any thicknesss including raking out joints upto 20mm without causing dust nuisance and disposal of unserviceable materials with all lead and lift. 94.00 Removing & Refixing of Existing Door Shutters And Damaged Frame with necessary Hold Fasts including making good the damaged wood work or providing Indian teak wood of extermely damaged frame and shutters including two coats of oil paint to exposed surface of frame and shutter with Wood primer coat and Necessary New S.S. fixures and fastners etc. complete As per Detailed Specifications And As Directed by EIC. 95.00 Removing & Refixing of Existing Window Shutters And Damaged Frame With Necessary Hold Fasts including making good the damaged wood work or providing Indian teak wood of extermely damaged frame and shutters including Two coats of oil paint to exposed surface of frame and shutter with One Coat Of Wood primer And Necessary S.S. Fixures andFfastners etc. Complete As Per Detailed Specifications And As Directed By EIC. 1.00 96.00 Providing and fixing 19mm thick water proof plywood shutters with both side 1 mm thick formica for kitchen/cupboard cabinet including using approved formica on shutter and teakwood decorative batten patti in front portion with necessary fixtures and fastening including polishing work etc. complete and direction of engineer in chare. (A) for kitchen cabinet (b) for cup board cabinet 1.00 97.00 Providing and fixing flush Lead door shuter solid core construction with enamel painted frame of first class hard wood (125mm x 60 mm) with face veneer or plywood face panel including nickel plated bright finished M.S. Piano hinges with necessary screws and 230mm S.S.handle, S.S. door stopper, S.S.latches, S.S. Haldraf and S.S. Tadi.Lead sheet of 1.85 mm thick ( unit weight of 23 kg/sqmt) shall cover on entire lenght and breadth of the door and it shall be covered with 6mm ply wood. Both side of the door shall be covered with 2mm thick laminated sheet approved by engineer in charge. Size 1.2 mt x 2.1 mt=2.52 sqmt 1.00 98.00 Providing, fixing and construction of sandwich type 18 mm thick One Side polished Granite Stone of uniform size and colour for kitchen/pantry/countr/ laboratory, sink shelves etc. in floor, dedo or facia upto 100 mm wide including necessary cement mortar bedding in cement mortar 1:2 of required thickness. Granite Stone shall be fixed over 25 mm thick Polished Kota bottom, cement joints and pointing as specified with necessary making of edges, polishing curing daily mopping with water and kerosene as directed for atleast 15 days or upto the satisfaction of engineer-in-charge. 1.00 99.00 Providing and fixing 25 mm thick both side polish kota stone shelves below platform, in store or in curpboards including fixing in position front edge machine cut polishing etc. complete 1.00 100.00 Providing & fixing Homogneous Vinyl flooring 2.00 MM thick and polyurthane reinforced with wight loss than 2.80kg/Sqmt with good chmical rsistant and that which do not fauren fungi and bacterialgouth with thicknes loss of les than 0.15mm and volume loss than 4.00mm cube and i roll from jointed by heat seam welding and with 25mm pvc covering at junction and making colour coping at the end to seal the joint of tarkett optima spica or equivelent make etc comptlete as per the design and shade approved by the engineer in charge. 101.00 Finishing wall with Acrylic emulsion paint (Apex ultima or equivalent only) on exterior wall surface (two Coats) to give an even shade of an approved brand and manufacture and even shape after thoroughly brushing the surface to remove all dirt, and remains of loose powdered materials at any floor, any level and any height. ( First Grade ) 102.00 Wall painting (two coats) with plastic emulsion paint of approved brand and manufacture on undecorated wall surface to give an even shade including throughly brushing the surface free from mortar droppings and other foreign matter and sand papered smooth. 103.00 Providing and fixing in position UPVC Cowel went to pipe (1) 75mm 103.01 Providing and fixing in position UPVC Cowel went to pipe (1) 110 mm 104.00 Providing and fixing cast iron (Spun) Nahni trap of the following nominal diameter of self cleaning design with C.I. screaed down or higned grating including cost of cutting and making good the walls and floor 100mm inlet and 50mm outlet.(C) 100mm dia. 105.00 Providing and fixing Kitchen sink with C.I. or M.S. brackets, painted white including cutting holes in walls and making good the same but excluding fittings. (C) Vitreous China Sink.(i) 600mm x 450mm x 150mm size 106.00 Providing and fixing brass chromium plated surgical handle cock of approved size 15 mm dia etc complete. 107.00 Providing & fixing in position Colour Powder Coated alluminium Partition with alluminium hollow section frame of approved shade fabricated from alluminium standard section for outer frame size 101 mm x 44.5 mm (of app. wt. 1.30 kg/Rmt.) and styles and top rial of alluminium section size 47.5mm x 44.5 mm (of app. wt. 1.14 kg/Rmt.) bottom rail & lock rail for Door size 114mm x 44.5mm (of app. wt. 1.7kg/Rmt.) and providing rubber gasket all over including 19 mm thick particle board sheet both side 1.5mm laminated sheet of approved make fixed clits including all required materials labours and equipments as per detailed drawing as directed by Engineer- In-Charge. 108.00 Providing & fixing in positionPowder Coated alluminium Single Shutter door with alluminium hollow section frame of approved shade fabricated from alluminium standard section for outer frame size 101 mm x 44.5 mm (of app. wt. 1.30 kg/Rmt.) and door styles and top rial of alluminium section size 47.5mm x 44.5 mm (of app. wt. 1.14 kg/Rmt.) bottom rail & lock rail for door size 114mm x 44.5mm (of app. wt. 1.7kg/Rmt.) and providing rubber gasket and glazing clips around the glass all over including providing heavy handle, heavy lock, bracket,Door closer, stoppers. 5 mm thick sheet ground glass (frosted or obscured on one side in Top panel) fixed with transparent silicon gasket & 19 mm thick particle board sheet both side 1.5mm laminated sheet of approved make fixed clits including all required materials labours and equipments as per detailed drawing as directed. 109.00 Providing and fixing (600 x 450 x 200 mm) size viterous china laboratory sink with CI or MS brackets painted white including cutting holes in walls and making good the same including providing and fixing 40mm dia C.P. brass waste couplin rails providing fixing PVC waste pipe etc. complete. 110.00 Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete. 111.00 Providing and fixng 90 C.M. high MS railing with 40 mm medium grade G.I. pipe for balconies, terrace parpets, ramp, stairs etc. with 25 x 25mm square Pipes Balusters @ spacing 10 cm c/c as per approved pattern including cutting, bending, welding, fixing and applying three coats of approved brand of primer and two coat of paint etc. complete 112.00 Providing PVC Plain Semi Transparent 2mm Sheet Roofing Fixed with G.I. Plain & Bitumen washer complete excluding the cost of Purlins, rafter & trusses 113.00 Old & Unserviceble material ALL TYPE OF CEILLING FANS/EX. FAN WITH WIRING POINTS. with removing charges.The dismenteling material will be the property of contractor. 114.00 Old & Unserviceble material ALL TYPE OF TUBELIGHT FITTINGS WITH WIRING POINTS. with removing charges.The dismenteling material will be the property of contractor. 115.00 Old & Unserviceble material ALL TYPE OF WINDOW TYPE AIR CONDITIONER UNIT WITH WIRING POINTS. with removing charges.The dismenteling material will be the property of contractor. 116.00 Providing and fixing wash down water closet (European type WC pan) with jet with integral P or S trape with soil pipe in cement mortar 1:1 (1 cement : 1 fine sand) with CP brass hinges and ruber buffers including cutting holes in wall and making good the same etc complete.Providing and fixing plastic seat and cover for wash down water closet with C.P. brass hinges and rubbers buffers, Including concealed body for Flush Valve consisting of concealaead body and cartidge with operating system as per Ebgineer Incarge. Providing & fixing of Jet Spray/hand shower with all accessories to complete the item in its respected manners as per directed by engineer in charge. 117.00 Providing and fixing S.S. railing using S.S. 304 tubes having dia. 50 mm for handrail, 25 mm dia posts placed that 600 mm centre to centre fixed in wall as per the detailed drawing including erecting in position grouting / fixing etc. complete 118.00 Supplying and fixing stainless steel hand Railing of Grade 304 with glossy finish consisting of 38 NB or nearest size vertical posts 900 Heigh at maximum spacing 900c/c with suitable cups at bottom and top rail of 50 NB or nearest size & intermediate rails of 20 NB or nearest size etc complete at all levels including bending to required profile. Tungsten insert gas welding & all required accessories, grinding & labour etc complete as per design fixing with base slab/concrete or side wall/RCC by suitable fastenre and plates as per instruction of Engineer-in-Charge. 119.00 Providing & Laying PU Tactile with 3 m Self Adhesive (300 x 300 mm) with 4 mouleded Washers. 120.00 Providing and fixing 5mm thick Acrylic Name Plate for Dark zinc glare with braile lippi and Fixing With Doubles sided bonding tape and screwed as per directon of engineer in charge. 121.00 Providing&fixingStainlesssteel316GrabBar40mmdia.75Cmlongrail.asdi rected and approved by engineer incharge.
