|
| 1 | Demolition of un reinforced Cement Concrete structure of any description. |
| 2 | Earth work excavation in hard/ dense soil for foundation width and depth not exceeding 1.50m and getting out. |
| 3 | Earth work excavation in hard/ dense soil for foundation width and depth exceeding 1.50m and getting out. |
| 4 | Excavating in post holes in Hard/dense soils (or similar holes) each n exc 0.5 cu.m, getting out, returning,filling in and ramming earth or broken rubble mixed with eart around,in layers not exceeding25cm, |
| 5 | Material and labour for hard core broken stone or bouldersof gauge not exceeding 63 mm deposited, spread and levelled in layers not exceeding 15 cms thick watered and rammed to through surface. |
| 6 | M & L for P.C.C 1:4:8, D2 type using 40mm graded aggregated in foundation. |
| 7 | M & L for R.C.C M25 (design Mix) ,in foundations, including rafts, footings, plinth beams etc., and mass concrete. |
| 8 | Material and Labour for spreading Metallic floor Hardner / Mixing with concrete |
| 9 | Material and labour for cement concrete 1:2:4 Type B1 20mm graded aggregate in foundation filling and mass concrete. |
| 10 | M & L for R.C.C, M25 (design Mix) in Walls, retaining walls,basement walls, ballast walls and the like; any thickness; above top of footings; including attached pilasters and buttresseswalls. |
| 11 | Supply and Fixing offramed workusing Fe 410 -W Gde E - 250 qualityA mild rolled steel tube,angles,plates etc. inculding cutting,welding etc complete. |
| 12 | M & L for Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to stepsincluding embeding in concrete and screwing etc. wind ties for roof including securing bolt |
| 13 | M & L for Formwork on Flat sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter including Fair Finished surface |
| 14 | Material and Labour for Formwork to flat faces of walls,retaining walls, abutments,parapets and staircase railings and similar work including attached pillasters, buttresses,etc.; vertical or to batter. |
| 15 | Material and labour for water stop sealer pad PVC 300 mm height fixed in concrete wall. |
| 16 | M & L for plastering in CM 1:4, 15mm thick on fair faces of brick work, concrete surfaces and Door & Window Jamb plastering. |
| 17 | Supply and fixing of mild steel reinforcement deformed or twisted bars 10mm dia and over including bending, cranking, hooking and tieing with mild steel wire not less than 0.90mm dia. |
| 18 | Removal of Rocks / debris exceeding 250m but not exceeding 500m and depositing where directed. |
| 19 | Removal of excavated earth material exceeding 250m but not exceeding 500m and depositing where directed. |
| 20 | Returing, refilling of hard / dense soil in the excavated trenchincluding spreading levelling, watering and well ramming in layers not exc 25 cm. |
| 21 | Strengthening of existing steel structureFe 410 -W Gde E - 250 qualityA in Compound girders and stanchions, lattice girders, aerial masts, staging for water tanks and the like including caps, bases, splices etc. built up from two or more beam or channel sections or angles with plates, including all lattice bars, stiffeners, gusset plates, etc. by welding/revetting etc complete inculding concreting,foundationetc complete. |
| 22 | Supply and Fixing of Framed work as in doors or gates of angle or other section Fe 410 -W Gde E - 250 qualityA with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete |
| 23 | Supply and Fixing of polycarbonatesheeting 4mm thick fixed with coach screw and washer in roof, wall etc. |
| 24 | S & F ofPowder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge. |
| 25 | Supply and Fixing of 12 mm thick Prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to Aluminium frame work |
| 26 | S& F ofNon - skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm,, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match., including Screed bedding 1:4, 25mm thick for laying floor finishes with for joint free non skid tiles. |
| 27 | S& F of Glazed ceramic coloured tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match include for joint free non skid tiles |
| 28 | S & F ofFactory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applyingPVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardantand fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). |
| 29 | S & F ofProviding and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 35 mm thick comprising of virigin polymer of K value 58-60 (Suspension Grade), Calcium Carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Calss A category and property of being termite / borer proof, water / moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S. Screws,all as per direction of Engineer-In-Charges (Note : stainless steel butt hinges and necessary S.S. screws shall be paid seperately) as per approved by E-I.C. |
| 30 | Supply of articulate hydaulic boom lift truck mounted or slow moving type as required at site for thesafety net tieing process only wherever pointed / directed by the safety section |
| 31 | S & F of 200mm Aluminumbarrel towerbolts, with cast or sheet barrel and rolled or cast bolts and fixed . |
| 32 | S & F of 125mm butt hinges, Butt hinges, extruded brass, with mild steel hinge pin, bright polished and fixed, type B-11 |
| 33 | S & F of 150mm Aluminium handles,Extruded aluminium alloyhandles, fabricated type,anodised |
| 34 | Supply and Fixing of granite(of any colour) work (table rubbedand polished) 20mm thick to fixing on wash basin platform, in steps, jambs, pillars, window-cills, cooking platformsincluding machine cutting suitably to fix the wash basin incluing nosing of inner nd outer edges in CM 1:4 including pointing in white cement(1:2) using marble dust with admixture with shade of granite complete as directed. |
| 35 | Material and labour for Providing edge moulding to18-20mm thick stone of counters vanities etc. including machine polishing to edge to give high gloss finish etc. completemaking nosing /Rounding to edges of Granite stone slabs one edge, such as in steps, platform, skirts, and othersimilar situations complete as direction by EIC. |
| 36 | Supply and Fixing of Stainless steel sink with draining board, made out of 1.00mm thick sheet for kitchen or laboratory with plug, washers waste pipe, cast iron cantilever brackets, connecting union overall size 915mmx460mm with bowl size 410mm x 330mm x 160mm complete all as directed by EIC. |
| 37 | S & F of20mm dia chromium plated Bib taps, long body type castcopper alloy withcrutch orbutterflyhandle, screweddown, screwed foriron pipe or forbrass ferrule andfixed |
| 38 | S & F of20 mm dia Stop valves, castcopper alloy,screweddown,highpressure,withcrutch orbutterfly handle,screwed bothends forironpipe orforunions and fixedfancytype, chromiumplated with longshankandcup(concealed type) |
| 39 | S & F of20 mm Bib tap standard ofPTMT any colour highpressure screwed foriron pipe and fixed. (Minimum weight20mm 125gms). |
| 40 | Supply and Fixing of Precast SRFC manhole covers with frame complete all as directed by EIC. |
| 41 | M&L for PVC Multi floor trap diameter of out let in 75mm with grating including with solvent cement. |
| 42 | M & L for PVC Gully trap 125/110mm of dia, setting and jointing with solvent cement. |
| 43 | S & F of Looking Mirror of any size as required at site selected quality glass, mount on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass |
| 44 | S & F of IWC Squat pan (Orissa pattern) Size 580 x 440mm white / colour with integral foot rests providinglime concrete bed and finishing the top etc.,10 litres flushing cistern low level white with inlet ball valve float and handle including bracket Plastic water closet seat, black, closed pattern with flat bottom,and cover and mild steel chromium plated or aluminised hinging device and etc. |
| 45 | Supply of EWC with \"P\" or \"S\" trap including bedding valveless syphonic action type 10 litres flushing cistern low level white with inlet ball valve float and handle including bracket Plastic water closet seat, black, closed pattern with flat bottom,and cover and mild steel chromium plated or aluminised hinging device and etc., complete and dismantling the existing IWC |
| 46 | S & Fof Vitreous China urinals, half stall type refixing in old type (back or corner wall type), work complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe.including Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms) |
| 47 | Supply and Fixing of Granite Partition made out of 20 mm thick granite fixed as urinal partitionfor 4feet height and average width 0.50 M and the front visible edges shall be full rounded to have a smooth surface including cutting the tiles neatly and inserting the granite urnla partioin in the tiles and securing and finishing with epoxy grout. |
| 48 | S & F of Angle stop valve of 15 MM PTMT any colour high pressure screwed for iron pipe and fixed,(Minimum weight 15mm-90gms) |
| 49 | S & F of PVC connections 15mm size with PTMT nuts of length 600mm |
| 50 | S & F ofhealth faucet(ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 meter long flexible tube and ABC wall hook including making connections and fixed in position complet in all respectfixing in pipe etc, |
| 51 | Supply and Fixing of Shower arm 15 mm size, 195mm long with bend of 45degree with flange of PTMT any colour.(Minimum weight 40gms). |
| 52 | S & F of PVC 110mm dia Pipes single socketed, in any length with rubber ring joints laid in trenches or in floors. |
| 53 | S & F of PVC 110mm dia Pipes single socketed, in any length with rubber ring joints fixed to walls. |
| 54 | S & F of PVC 75 mm dia Pipes single socketed, in any length with rubber ring joints laid in trenches or in floors. |
| 55 | S & F of PVC Bend with door 110mm dia any radius, |
| 56 | S & F of PVC Bend with door 75mm dia any radius, |
| 57 | S & F of PVC single \"Y\" with door 110 mm dia any radius, |
| 58 | S & F of PVC (SWR) 75mm,junction single, (Single T) equal or unequal and provided. |
| 59 | S & F of PVC (SWR) 110mm,junction single, (Single T) equal or unequal and provided. |
| 60 | PVC (SWR) reducers 110mm dia any radius. |
| 61 | S & F of PVC Vent Cowl 110mm dia. |
| 62 | S&F Cast iron heavy duty Drian/channel grating of weight exe. 5 kgsize300x600 m wieghing around 15 kg fixed on floorincluding setting & finshing the sides with Cement mortar comeple (10 nos @ 15 kg / no 150 Kg ) |
| 63 | Supplying and laying of CPVC pipes 20mm dia SDR 11 including all fittings such as elbow, tee, etc., Plain CPVC SDR 11 fittings on walls /ceiling or laying in floors complete all as specified |
| 64 | Supplying and laying of CPVC pipes 25mm dia SDR 11 including all fittings such as elbow, tee, etc., Plain CPVC SDR 11 fittings on walls /ceiling or laying in floors complete all as specified. |
| 65 | S & F of 50 mm dia UPVC Pipes (SCH-40)of pressure rating 6 kgf/cm2 fixed complete to walls, ceilings or in floors etc. |
| 66 | S & F25mmdiaUnplasticised PVC pipes of pressurerating 10 kgf/cm 2 fixed complete towalls, ceilings or in floors etc., any type of pipe |
| 67 | S & F of Gun Metal Valve 20mm dia with iron wheel head, screwed both ends for iron pipe. |
| 68 | S & F of Gun Metal Valve 25mm dia with iron wheel head, screwed both ends for iron pipe. |
| 69 | S & F of Gun Metal Valve 50mm dia with iron wheel head, screwed both ends for iron pipe. |
| 70 | S & F of 25/20 mm dia brass ball valves high pressure, with epoxy coated aluminium rod & High density plasticfloat and fly nut complete screwed for iron pipe. Minimum weight for 25mm dia shall be 455 gms. |
| 71 | S & F of 1000 litres capacity Rotational moulded polyethylene water storagetanks (cylindrical verticalwith closed top) hoistedand fixed in position all asspecified in SSR Part I |
| 72 | Supply and fixing factory made uPVC white colour fixed glazed window/ventilator made of (small series) frame 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area upto 0.75 sqm.) comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusionwelded including drilling of holes for fixing hardware\"s and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Glass shall be paid separately) |
| 73 | S & F of 5.5mm Sheet glass, ordinary quality and glazing rubber beading with in square exceeding 0.5 sq. m in each pane as required for the aluminium partition. |
| 74 | S & f of Aluminium Hollow Section frame( size 40mm x12mm)/ 1.8\" windows(size 25mm x12mm) for Mosquito Proofingshutter and size 16mmx9mm rectangular hollow sections with necessary corner brackets),intermediate sash bares etc all complete and as directed. |
| 75 | S & f of Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples |
| 76 | M & L for painting to wooden surfaces of any description over 10cm width or girth with Two coats of synthetic enamel paint. including pink primer preparing newwooden surfaces. |
| 77 | M & L for painting to steel surfaces ofany description, over 10cm in width or girth,with two coats of synthetic enamel paint over a coat of redoxide primer including preparing new surfaces. |
| 78 | Complete removal of exisitng treatment from walls including all as directed. |
| 79 | Material and labour for applying two coats of Exterior plastic emulsionon old new External wall surfacesincluding a coat of external primer coat and preparation of new untreated surfaces all complete {MAKE:- ASIAN paint (Apex Ultima)/ NEROLAC(Excel Total) / BERGER(Weather coat long life 7) } or Suitably Equivalent Make |
| 80 | Material and labour for applying two coat of oil bound distemper on internal wall surfacesincluding priming paint andpreparation of new painted surfaces (MAKE:- ASIAN / NEROLAC / BERGER) or SuitablyEquivalent Make. |
| 81 | M & L for Cutting chases, pinning in. making good to Brick work / concrete facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth |
| 82 | M & L for Brick work with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius, built In cement mortor 1:6 |
| 83 | S&F of Pre-painted galvalume aluminium zinc coating GI based corugatted steel sheet 0.50mm (TCT) thick of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall fixed with self drilling / self tapping anti corrisive screws with EPDM seal complete all as per manfacturers specifications and instructions and as approved and as directed by EIC |
| 84 | S&F of Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self drilling / self tapping anti corrisive screws with EPDM seal complete all as per manfacturers specifications and instructions and as approved and as directed by EIC |
| 85 | Laying and compacting 300 mm thick (compacted thickness)each layer not exceeding 150mm Granular Sub Base Course (GSB) grading as per Grade I as specified Table 400-1 of MoRTH specifications for Road and Bridge works, 2013, in a single layer over compacted subgrade with natural sand, crushed gravel, crushed stone, crushed slag, or combination thereof as per the grading required The materials are mechanically mixed, spread and leveling on the subgrade by using motor grader of adequate capacity, and rolling with vibratory roller of capacity 80-100 KN static weight for achieving required compaction density of atleast 98% of the Maximum Dry Density. Consolidating to required gradient and camber complete all as specified and directed with finished surface tolerances as per Table 900-1 of MoRTH specifications for Road and Bridge works, 2013. |
| 86 | Laying and compacting 225 mm thick (compacted thickness) Wet Mix Macadam (WMM)WMM laid in three IayerS of 75 mm each. grading as per table 400-13 of MoRTH :specifications for Road and Bridge works 2013 manufactured in WMM plant, material comprising of clean, crushed, graded aggregate and granular material premixed with water to a dense mass, spreading with sensor paver and rolling with vibratory roller of capacity 80-100KN static weight and consolidating to required gradient and camber complete all as specified and directed The finished surface tolerances to be as per Table 900-1 of MoRTH specifications for Road and Bridge works 2013 |
| 87 | Supplying and laying 400 micron thick HDPE sheet (Virgin Quality) water proof, wrinkle free without puncture having minimum weight 390 gm/Sqm over tack coat/sand cushion as specified in the design with overlap between adjacent strips and at transverse joints as minimum 300mm. |
| 88 | Material and Labour for Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering. |
| 89 | Material and Labour for stone sett flooring with stone setts of size 200 to 250mm long,150 to 200mm wide and 150mm deep and sides dressed; bedded in cement mortar 1:3, joints 20mm thick; grouted in cement mortar 1:2 with an admixture of metallic floor hardner 5% by weight of cement and struck. |
| 90 | Supply and fixing of Cement concrete Tiles 20cmx20cmx20mm thick with grey cement and pigment machine pressed with screed bed or bedding layer in CM 1:3 , 15mm thick and pointed in neat ceemnt slurry in floors and cut polished. |
| 91 | Material and labour for Point wiring withPVC insulated sheathed single core cable 1100V grade confirming to IS 694 multi strand copper conductor along with 2mm thick PVC conduuit accessories run on wall or roof including M.S. switch box concealed in the wall(made out of 3mm thick sheet) and laminated sun mica sheet 3mm thick cover for housing the switches, regulators and plug socket etc.mount on a wall/roof etc. including same size copper earth continuity wire .a)one light point or one fan point controlled by one switch with cables1.5 sqmm size. |
| 92 | Material and labour for Point wiring withPVC insulated sheathed single core cable 1100V grade confirming to IS 694 multi strand copper conductor along with 2mm thick PVC conduuit accessories run on wall or roof including M.S. switch box concealed in the wall(made out of 3mm thick sheet) and laminated sun mica sheet 3mm thick cover for housing the switches, regulators and plug socket etc.mount on a wall/roof etc. including same size copper earth continuity wire.b)One 3 pin socket outlet 5 amps on the same board with other switches, with cables 2.5 sqmm size. |
| 93 | Supply and laying or fixing or passing through pipe, 1100 volts grade heavy duty cable with PVCinsulated aluminium conductor served with an inner sheathing ofPVC tape armoured with galvanised steel wire or tape and overall PVC sheathed 10 sq. mm nominal cross section in service connections stranded conductor 4 core (Make: Gloster/Nicco/ Havells/ Finolex/ Orbit) or suitable equivalent make. |
| 94 | Supply and laying or fixing or passing through pipe, 1100 volts grade heavy duty cable with PVCinsulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed 16 sq. mm nominal cross section in service connections stranded conductor 4 core (Make: Gloster/Nicco/ Havells/ Finolex/ Orbit)or suitable equivalent make. |
| 95 | Material & Labour forSwitch piano, flush type single pole, one way 6 Amp (Make: Anchor/ Havells/ Legrand)or suitable equivalent make. |
| 96 | Supply & fixing ofsocket outlet 2 in 1,3 pin 6 A flush type (Make: Anchor/ Havells/ Legrand)or suitable equivalent make. |
| 97 | Material & LabourforPVC/ Polycorbonate, isolatedceiling rose 5A, 230V, AC , three terminals. (Make: ANCHOR/ HAVELLS ) or suitable equivalent make. |
| 98 | Supply & Fixing of wiring for circuit/sub main wiring along with earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface/recessed as required in PVC conduita) 2x2.5 sqmm + 1x2.5 sqmm earth wire |
| 99 | Supply & fixing Single pole andneutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 amps 240 VOLTS. (Make: Legrand / Havells /Anchor ) or suitable equivalent make |
| 100 | Supply and fixing of LEDlight fittings 1 x 22 watts 220 volt AC decorative box type with driver , holder including LED tubelight connecting up with three core flexible copper coductor cable of suitable size from ceiling rose complete. (Make:,LEGRAND MYRIUS / ANCHOR ROMA / GM )or suitable equivalent make. |
| 101 | Supply, fixing & connecting to the system of Sheet metal enclosures with single door DB\"s 240 V when MCB\"S to be used Single pole & neutral 2 way without busbar, (Make: Legrand/ Havells/Hager/ ABB)or suitable equivalent make. |
| 102 | Supply, fixing & connecting to the system of Sheet metal enclosures with double door DB\"s when MCB\"S to be used Triple pole & neutral 4 way,415 V with 200 Amps rated busbar, (Make: Legrand/Havells / ABB or suitable equivalent make) |
| 103 | Supply & fixing 415 Volt,10KA \"C\" curve MCB of TPN 40 To 100Amps in the MCB DB complete with connection testing and commissioning. (Make :Legrand/ Havells/ C&S or suitable equivalent make) |
| 104 | Supply and fixing amp rating 240V, 10KA \"C\" curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning. SPN 32 AMP (Make: ABB/Legrand/ Havells/Hager)or suitable equivalent make. |
| 105 | Supply & fixing 240 Volt,10KA \"C\" curve MCB of single pole 6 to 32Amps in the MCB DB complete with connection testing and commissioning. (Make Legrand/Havells/C&S) or suitable equivalent make |
| 106 | Material and labour for Brick wall cutting chases,pining in, making good to facing where required and pointing in cement mortor 1:3 to ends and cutting chases forconcealed conduit wiring, etc.,and making good,cutting exceeding 20cm girth. |
| 107 | Demolition of cement concreteof any description and in any position |
| 108 | Material and labour for cement concrete 1:2:4 Type B1 using 20mm graded aggregate in foundations, filling and mass concrete |
| 109 | Supply only of Industrial Pedestal Air circulators, sweep: 600mm(24\") with capacitor start & run motor, 200watts maximum power consumption. (Make: MDS/ Havells/ Standard/ Anchor/Almonard/Khaitan/Crompton ) or suitable equivalent make, with close wire mesh. |
| 110 | Supply & erection of Heavy duty air circulator fan of sweep 750 mm speed 1400 RPM as per scope of work whole job basis including DOL Statrer cable and a plug point for pedestal fan.Scope of Work attached at Annexure-I in NIT document |
| 111 | Removal, Rewinding, Servicing, Relocating of Heavy Duty Roof Exhaust Fans.Scope of Work attached at Annexure-II in NIT document. |
