Tender For provision Of Hard Standing Shed Bathroom Facility Toilet Block Along With Septic Tank At Various Locations Under Age Reasi Of Ge Nagrota= 1 SCHEDULE-A PART-I (B/R WORKS)Surface dressing n. exc. 15cm deep in any type of soil complete all as specified and directed. 2 Exc. In trenches n.exc. 1.5m wide and n.exc1.5m wide and n.exc 1.5m deep and getting out in any type of soil complete all as specified and directed. 3 M&L PCC 1:4:8 Type D2( using 40mm graded crushed stone agg) , as in fdn filling and mass concrete complete all as specified and directed. 4 M&L Brick work with sub class B bricks straight or curved on plan exceeding 6m mean radius with old size bricks (best quality) built in CM 1:6.complete all as specified and directed. 5 M&L RCC (1:2:4) type B-1(using 20mm graded crushed stone aggregate) as in plinth beam beams complete all as specified and directed. 6 M&L RCC (1:2:4) type B-1(using 20mm graded crushed stone aggregate) as in lintel beams and over 1.50 mtr height complete all as specified and directed. 7 S&F Form work to sides of concrete foundation, footing, bases of columns,raft and raft beams, sides and soffits (if any) of foundation and plinth beam and similar work complete all as specified and directed. 8 S&F Form work to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelvesincluding sup- ports, overhangs, etc. also splays between floors and beams, etc. complete all as specified and directed. 9 M&L mild steelTMT bars 10mm dia and over, cut to length bent to shape required including cranking binding spirally for hooping for column hooking and binding with MS wire annealed not less than 0.9mm dia or securing with clips complete all as specified and directed. 10 M&L Mild steel TMT bars 5mm dia and over, upto and including 10mm dia as in stirrups, spacers and binders complete all as specified and directed. 11 M & L for Rendering 15mm thick cement plaster on fair faces of brick work or concrete surfaces in cement mortar (1:4) finished even and smooth without using extra cement with integral water proofing compoundand two coats of cement base paint over one coat primer complete all as specified and directed 12 M & L for Rendering 10mm thick cement plaster on other than fair faces of brick work or concrete surfaces in cement mortar (1:6) finished even and smooth without using extra cement and applying three coats of white wash on newly plastered surface incl preparation of surface complete all as specified and directed 13 M&L for Cement concrete 1:4:8 type D-2 using 40mm graded agg and 75mm thick as in sub base of floors complete all as specified and directed. 14 M&L 25mm thick Cement concrete 1:2:4 type B-0 using 12.5mm graded aggt as in floors complete all as specified and directed. 15 M&L Non - skid jointless ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in CM 1:6 complete all as specified and directed. 16 M&L for coloured glazed ceramic tiles (designer Pattern, HL)in vertical surface 350 x 250 x 7 mm / 450 x 350 x 7 mm /450 x 300 x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match tiles including 10mm thick rendering in CM 1:4 on brick wall complete all as specified and as directed 17 S&F Solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube supplying and fixing in opening as per specification and drawing complete all as specified and directed. 18 S&F Factory made solid PVC door shutters 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails, MS frame shall be covered with heat moulded plain colour PVC C channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS framewelded/sealed to the stiles and rails with suitable PVC sheet beading and joined together with slovent cement, suppling and fixing in the frame at site as per specification and drawing complete all as specified and directed. 19 S&F Butt hinges medium weight cold rolled mild steel 100mm and fixed complete all as specified and directed. 20 S&F Aluminium anodised, barrel tower bolt of extruded section and fixed 150mm complete all as specified and directed complete all as specified and directed. 21 S&FAluminium alloy anodised slidingdoor bolt with hasp and staple (bolt type) and fixing clips of sheet, cast orextruded section and fixing bolts and sliding bolts of extruded section300mm size complete all as specified and directed. 22 S&FAluminium handles cast typeanodised 150mm complete all as specified and directed. 23 M&L, PCC (1:3:6)type C2, using 40mm graded stone aggregate as in plinth protection laid in panel alternate bays not exc 2.00 sqm with 6mm wide joints and joints filled with mastic fillings, finishedeven and fair complete 50mm thickcomplete all as specified and directed. 24 S & F Steel windows/ventilator with tubular frame factory made with double shutter (wire gauged shutter & glass/glazed shutter, (wire cloth and glass panes shall be measured and paid separately) of size 79mmx39mm,16 gauge rectangular tubular frame withside hung shutter with glazing bars 12x3mm flat iron incl box type hinges with steel handle and steel peg stay dovetailed or welded incl 2 Nos tower bolts 100mm long and 10mm square bar grills complete,two coats of synthetic enamel paint over one coat of red oxide primer all as specified & as shown on drg . 25 S & F Steel windows or ventilators, fixed type, with glazing bars all as specified & as shown on drg . 26 S&F Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.00mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed. 27 S&f Figured glass, pin head type and glazing with oil putty in square n.exc 0.5 Sqm in each pane 3.00mm thick complete all as specified and directed. 28 S&F GI tubing medium grade with all fittings and fixed complete to walls are laid in floors 15mm complete all as specified and directed. 29 S&F GI tubing medium grade with all fittings and fixed complete to walls are laid in floors 20mm complete all as specified and directed. 30 S&F Bib tap 15mm bore fancy type chromium plated ,cast copper alloy with capstan headscrewed down for iron pipes complete all as specified and directed. 31 S&F 15 mm bore dia fancy type Pillar taps, castcopper alloy, withcapstan heads,chromium plated, screwed down high pressure, with or without lettered Hot or Cold with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed. 32 S&F dia Cast iron floor trap with grating including jointing to waste pipe fixed in cement concrete type B-1, 75 mm dia of outlet complete all as specified and directed. 33 S&F PVC (SWR)bends any radius 75mm bore of pipe complete all as specified and directed. 34 S&F 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed. 35 S&F 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints laid, in trenches or in floors complete all as specified and directed. 36 S&F 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints laid, in trenches or in floors complete all as specified and directed. 37 S & F PVC (SWR) junction single (Single T) equal or unequal with acess door, 110 mm dia complete all as specified and directed. 38 S&F PVC (SWR) vent cowl 110 mm bore.complete all as specified and directed. 39 Supply & Fixed in repairs PVC (SWR) vent cowl 75 mm dia complete all as specified and directed. 40 S&F Vitreous China Ware Wash hand basinwhite, flat back, size 210 x 580 x 460 x mm size with long padestal,32 mm Waste fittings, brass,chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cementand other end fixed 32mm dia stainless steel waste coupling ofincluding cutting for and pinning ends of brackets or erecting stand complete all as specified and directed. 41 S&F 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed 42 S&F PVC body valve less syphonic action type flushing cistern white low level with inlet ball valve float and handle including brackets 10 Ltrs capacity fixed complete all as specified and directed 43 S&F PVC connections suitable for 15mm bore with nuts of length 600mm each (superior quality) complete all as specified and directed. 44 S&F Grating doom 100mm dia of PTMT ( Minimum weight 25 gms) complete all as specified and directed. 45 S&F 1000 ltr capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified and directed. 46 S&F 20mm bore Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed 47 Supply and Fixin repairs Health faucet (Hand shower) with 1metre flexible tube with wall hook, Chromium Platedall as specified and as directed by the Engineer-in-Charge. 48 S&FSoap dish,vitreous China white, approximate size 160x 160x90mm, fixed to plugs with chromium platedbrass screwscomplete all as specified and directed. 49 Supply only Integral water proofing compoundcomplete all as spd & directed. 50 Supply & Fixed 15 mm CP angle cock chrome finish cast copper alloy, with wall flangecomplete all as specified and directed. 51 S&F CP Toilet paper holder, complete all as specified and directed. 52 Supply & Fix Anodised aluminium snap grid frame work for false ceiling all as specified. (Size of grid 605 X 605 mm) complete all as specified and directed. 53 Supply & Fix 6mm thick Non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Aluminium framework with screws.) fixed in ciiling surface complete all as specified and directed 54 S&F towel rail 600mm long of CP fixed with and including chromium plated brass screws and plastic cleats complete all as specified & directed. 55 S&F 20mm Gun-metal, globe or gate valves,with iron wheelhead,screwed both ends for iron pipe and fixedcomplete all as specified and directed. 56 S&F 15mm bore (concealed) brass valveshigh pressure, with crutch or butterfly handale screwed both ends for iron pipe or unions fixedand flynut complete, screwed for iron pipe or brass ferrule and fixedcomplete all as specified and directed. 57 Supply & Fix CP Brass shower rose 125mm of size with or with out swivel joints any size including fixing to steel pipe or union as fixed in repaircomplete all as specified and directed. 58 S&F Vitreous China Urinal, white includingflushing cistern, flush pipe and waste pipe) Make Parryware NEW MAGNUM Code No C0575including Spreader Code No C8095 and other accessories and Bracket with fixing arrangementcomplete all as specified and directed. 59 Supply & Fixed in repairs vitreous china pedestalpattern type white wash down water closet pan with Antimicrobial Solid Seat Cover but excluding flushing cistern and flush pipecomplete all as specified and directed. 60 Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in any type of soil complete all as specified and directed. 61 M&L for Hardcore of gauge n exc. 63mm, deposited, spread andlevelled in layers n exc. 15cm thick, watered andrammed to a true surfacecomplete all as specified and directed. 62 M&L Cement concrete 1:4:8 type D-2 using 40mm graded agg and 75mm thick as in sub base of floors.complete all as specified and directed. 63 M&L coloured rubberised Machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 Grade with grey cement and pigment complete all as specified and directed. 64 M&L coloured rubberised Machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 Grade with grey cement and no pigment complete all as specified and directed. 65 Supply only Fine aggregate (sand) for laying floor finishes complete all as specified and directed. 66 M&L PCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in copings, Kerbs including necessary formwork etc complete all as specified. 67 Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, in any type of soilcomplete all as specified and directed. 68 M&L PCC 1:2:4 Type B2( using 40mm graded crushed stone agg) , as in fdn filling and mass concretecomplete all as specified and directed. 69 S&F framed work such as grills, gratings, etc with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, reailing, framework of watertanks and similar work conforming to Fe-290, gde E-165complete all as specified and directed. 70 S&F for Rolled sections as in post, main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates of Fe 410-W (Gde- E-250 quality-A)complete all as specified and directed. 71 M&L for Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc.complete all as specified and directed. 72 S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specifiedcomplete all as specified and directed. 73 S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screwscomplete all as specified and directed. 74 M&L paintingtwo coats over a coat of red oxide primer to new steel surface of descriptionincl preparation of surfaces over 10 CM width or girth, not other wise described. complete all as specified and directed. 75 Excavation in trenches n.exc 1.5m wide and n.exc 1.5m depth for fdn etcor for shaft well,cesspits,manholes, pierholes etc n. exc.10 sqm on plan and n. exc 1.5m in depth and getting out in any type of soil.complete all as specified and directed. 76 M&L Cement concrete1:4:8type D-2 ( using 40mm grade crushed stone aggregate) as in fdn filling and mass concrete.complete all as specified and directed. 77 Returning filling in incl spreading, leveling watering and well ramming in layers n. exc 25 cm thick.complete all as specified and directed. 78 Removing excavated material (soil) n.exc 50m and spreading where directed at a level n.exc 1.5m above the starting point complete all as specified and directed. 79 M&L concrete bed to drain pipeincl packing under and haunching against the sides of pipes after they are laid and tested in cement concrete 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) for 150mm bore pipe complete all as specified and directed. 80 M&L SGSW pipe 150mm dia bore type ‘A’ laid in trencheson concrete bed and jointedcomplete all as specified and directed. 81 M&L Brick work with sub class B bricks straight or curved on plan exc 6 mtr mean in radius built in CM 1:4complete all as specified and directed. 82 M&L for Rendering 15mm thick in two layers [base layer 10mm in CM 1:4 & finishing layer 5mm thick in cement mortar (1:4)] usingwater proofing compound in 2nd layer only on brick work or concrete surfaces of wall, surfaces finished even and smooth using extra cement complete all as specified & directed.Note : WPC shallbe measured and paid separatel 83 M&L for Extra for forming fair finished drain o rchannel 30 cm inner girth.complete all as specified and directed. 84 M&L for cutting into existing manhole and making good.(150mm)complete all as specified and directed. 85 M&L for PCC 1:2:4 type B2 as in surface channels and drains completeincl necessary farmwork all as specified and directed 86 M&L for Precast cement concrete slab for Manhole coverof type B-1, 1:2:4 (using 20 mm graded crushed agg.) set in CM 1:6complete all as specified and directed. 87 M & L for Septic tank, exc. In ordinary soil foundation in PCC 1:2:4,brick work in cement mortar 1:4,RCC slab covers incl RCC pre-cast manhole cover having 6mm plate all around, reinforced cover with angle iron frame, vent shaft and sludge chamber etc. complete for 100 user as per CE/TD-1202 Sh ½ and 2/2.complete all as specified and directed. 88 M & L for Soakage wells exc, in ordinary Soil, Foundation in PCC 1:3:6, wells of Honey combed and solid in M-25 Concrete, including intercepting chamber screen chamber Brick work in CM, RCC cover slab in M-25/ RR masonry / Filling with brick bats, complete of size 1.8 M dia X 4.50M deep.complete all as specified and directed. 89 M & L for Soakage wells exc, in ordinary Soil, Foundation in PCC 1:3:6, wells of Honey combed and solid in M-25 Concrete, including intercepting chamber screen chamber Brick work in CM, RCC cover slab in M-25/ RR masonry / Filling with brick bats, complete of size 1.2 M dia X 3.0M deep.complete all as specified and directed. 90 SCHEDULE-A PART-II (E/M WORKS)M&L for point wiring with 1100 volts grade PVC insulated FRLS multistranded copper conductor cable 1.5 sqmm (Phase - Red, Neutral - Black) and earth continuity conductor 1.5 sqmm (Green) drawn into and including concealed rigid non metallic PVC conduit medium grade not less than 20 mm diaISI marked ivory colour with all conduit fittings / fixing accessories and unwelded sunken galvanized pressed steel terminal boxes of thickness not less than 1.2 mm covered with 3 mm thick phenoliclaminated white sheet cover for mounting switches, sockets, fan regulators complete for the following :- 91 (a) One light/fan point controlled by one switch. 92 (b) One socket outlet 6 amp controlled by one switch on the same board with other switches. 93 (c) One socket outlet 6 amp controlled by one switch on the Independent board with other switches. 94 M&L for point wiring with 1100 volts grade PVC insulated FRLS multistranded copper conductor cable 2.5 sqmm (Phase - Red, Neutral - Black) and earth continuity conductor 2.5 sqmm (Green) drawn into and including concealed rigid non metallic PVC conduit medium grade not less than 20 mm diaISI marked ivory colour with all conduit fittings / fixing accessories and unwelded sunken galvanized pressed steel terminal box of thickness not less than 1.2 mm covered with 3 mm thick phenolic laminated white sheet cover for one 16 amp socket outlet controlled by one switch on independent board complete all as specified and directed. 95 Supply and fix 10 watt LED Bulbcomplete all as specified and directed. 96 Supply and fixlamp holder insulated body with back plate suitable for battern fittings complete all as specified and directed at site. 97 Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V ACdecorative type with driver holder and LED lamp including connecting up with three core flexiblecopper conductor cable of suitable size complete all as specified and directed. 98 S&F switch piano flush button single pole one way 6 amp complete all as specified and directed. 99 S&F socket outlet 2 in 1, 2 & 3 pin, 6 amp, flush type complete all as specified and directed. 100 S&F Switch socket combination 2 in 1, 3 pin, 6 and 16 Amp flush type universal complete all as specified and directed. 101 S&F socket outlet 2 in 1, 2 & 3 pin, 6 amp, flush type complete all as specified and directed. 102 S&F ceiling rose 6 amp, 3 plates polycarbonate body complete all as specified and directed. 103 M&L for Earthing complete with galvanised steel earth plate electrode 60×60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not lessthan 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing complete all as specified and directed. 104 Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers complete all as specified and directed. 105 Supply and fixing LED lights fitting 1x 20 W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.. 106 S & F LED light fitting 1x9W/1X10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. 107 S&F MCB distribution board SPN, 240 volts, 8 ways double door powder coated, CRCA steel sheet constructed as per IS : 8623, degree of protection IP 43 - IK 09 with metal door, recess mounted, having insulated 100 amp tinned copper bus bar, neutral busbar, earth bar, din bar, detachable gland plate, interconnection, earthing connection, blanking plates in unused spaces as required complete all as specified and directed. 108 S&F MCBs as per load requirementC series of breaking capacity 10 KA, ISI marked including required wiring connections with copper lugs of suitable size provided in MCB DBs of following ratings:- 109 (a) Single pole 6 to 40 amp. 110 (b)Single pole and nuetral 10 to 40 amp. 111 Excavation in trenches in any type of soil not exc. 1.5 m wide and not exc. 1.5 in depth for laying of cabel or pipes (where provided for protection of cable) etc. and getting out trimming the sides, forming bottom surfaces to require level complete all as specified and directed 112 Returning filling in including spreading levelling watering and well ramming in layers not exc. 25 cm thick each complete all as specified and directed 113 Removing excavated material to a distance not exc. 50 mtr and depositing where directed at a level not exc. 1.5 mtr above the starting point of any type of soil complete all as specified and directed 114 M & L for sand cushioning with a layer of sand 80 mm thick before laying of cable and 150 mm thick after laying of cable in trenches complete all as specified and directed. 115 M&L for un-reinforced precast concrete cable cover class LV, type 2, flat of size 300X180X40 mm for protection of cable laid transversally along the length of cable complete all as specified and directed. 116 Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10 sq mm 2 core complete all as specified and directed. 117 S & F in Tubes, light grade, galvanised, with all fitting laid in trenches for road/drain crossing of size 25 mm complete all as specified and directed. 118 M & L for Screwing existing steel tubing for alterations or additions (or lengthening screw on pipe to form connector) complete all as specified and directed. 119 S&F PP-R Gate valves 20 mm bore (brass insert) as per requirement of the sitecomplete all as specified and directed. 120 S&F PP-R Gate valves 25 mm bore (brass insert) as per requirement of the sitecomplete all as specified and directed. 121 S&F Tubes, medium grade,20 mm galvanised, with all fitting; laid in trenches complete all as specified and directed. 122 S&F Tubes, medium grade,25 mm galvanised, with all fitting; laid in trenches complete all as specified and directed.
