Construction Of Water Reservoir Tank Near The House Of Rajkumar Biswa Part No. Iii Under Mhgp. Activity Id 112016571. Fund- 15Th F.C.- 1 Earth work in excavation in foundation trenches in all sorts of soil (including mixed soil but excluding late rite and sand stone) including removing spreading or stacking the spoils within a lead of 75 m. as directed. The item includes necessary trimming the sides of trenches, leveling dressing and ramming the bottom, bailing out water as required complete. 2 Earthwork in filling in foundation trenches or plingth with good earth, in layers not exceeding 150mm including watering and ramming etc. layer by layer complete. (Payment to be made on the basis of measurement of finished quantity of work) 3 (II) Cement concrete with 30 mm down graded shingles excluding shuttering. N.B. VarietyIn ground floor(a) 1:3:6 proportion 4 125mm thick Brick work with 1st class Bricks in cement mortar (4:1) 5 Ordinary Cement Concrete (mix 1:1.5:3) with graded stone chips (20mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes. 6 Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking outafter completion of works (upto roof of ground loor) (When the height of a particular floor is more than 4 m the equivalent floor height shall be taken as 4 m and extra for works beyond the initial 4 m ht.shall be allowed under 12 (e) for every 4 m or part thereof (a) 25 mm to 30 mm thick wooden shuttering as per decision & direction of Engineer-In-Charge. 7 Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction. II. Other than SAIL/ TATA/RINL 8 Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/stagingwhere necessary (Ground floor).[Excluding cost of chipping over concrete surface](i) With 1:6 cement mortar20 mm thick plaster 9 Neat cement punning about 1.5mm thick in wall dedo, window, silts, floor, drain etc. 10 Supplying, fitting and fixing brass ferrule including connection with G.I pipes of TATA make of following Dia, and upto 450mm long with screw, jamnut, sockets etc. complete in all respect including cutting trenches in all sorts of soil and filling up the trenches as per direction of the Engineer-in-Charge.(i) 25mm dia 11 Supplying, fitting and fixing PVC pipes for underground work of approved make of Schedule 80 (medium duty) conforming to ASTMD -1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, specials viz. socket, bend, tee, union, cross,elbo, nipple,longscrew, reducing socket, reducing tee, short piece etc. fitted including cost of all materials, jointing materials, cutting pipes, making threads, cutting trenches upto 1.5 metre below surface in all sorts of soil and refilling the same as directed complete in all respect. (Payment will be made on the centre line measurement of the total pipe line including all specials No separate payment will be made for accessories specials.) 25mm dia Medium quality 12 Supplying, fitting and fixing CPVC (Chlorinated Polyvinyl Chloride) pipes of approved make conforming to IS-15778: 2007 . with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads, fitting, fixing etc. complete in all respect including cost of all necessary fittings as required, jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. Payment of painting will be made seperately) 25mm dia medium quality 13 15mm dia Medium quality 14 Supplying, fitting and fixing gunmetal sheel valve with approved brand and make tested to 21 Kg per Sq,Cm (for water lines only)25mm dia 15 Supplying, fitting and fixing bib cock or stop cock. (ii) Polythene Bib Cock / Stop Cock15 mm 16 Supply Display Board at site 17 GST @18% 18 LWC @1%
