Repairing And Others Ancillary Works At Auro Binda Shishu Uddyan Park In Ward No. 127.- 1 BUILDING WORKS. (T)MISCELLANEOUS WORKS: A. SPECIALWORKS. I. HORTICULTURE: 2.Supplying and stacking sludge (adequate for Horticulture work) at site in dry cake form from approved disposal work site including royalty, all lead and lift etc. (Sludge measured in stack will be reduced by 8%). 2 BUILDING WORKS (F) STRUCTURAL STEEL WORKS, GRILLS, GATES ETC. A. ORIGINAL WORKS 13. (a) M.S.or W.I. Ornamental grill of approved design joints continuously welded with M.S, W.I. Flats and bars of windows,railing etc. fitted and fixed with necessary screws and lugs in ground floor. (Add extra @ 1% for each addl. floor upto 4th floor and @ 1.25% for each addl. floor above 4th floor) ((ii) Grill weighing above 16 Kg./sq.mtr and above. (MODE OF MEASUREMENT):-The weight of grill per sq.m. will be determined by taking the physical weight of fabricated grill and dividing the same by covered area of the same. N.B. No shop priming will be allowed to facilitate inspection of workmanship. Weight of grill is to be taken after final grinding and finishing the weld. 3 BUILDING WORKS (K) PAINTING, VERNISHINGETC?(B)MISCELLANEOUS ITEMS.(3)Removing old paint from blistered painted surface of steel or other metal by chipping including scraping and cleaning and exposing the original surface.N.B.:(Payment against item (1, 2, 3, 4) of subhead B will be made only when done at specific direction of the Engineer- in-charge. Cost of taking out shutter etc.for this item and rehanging the same or changing glass panes cracked or broken in the operation will be deemed to be covered by the rate of this item and no seperate payment therefore shall be made.) 4 SECTION 1BUILDING WORKS (K) PAINTING,VERNISHING ETC A. ORIGINAL WORKS 1 (a) Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc (This item is applicable to new work or old work when the original surface has been exposed by removal of old paint.) 5 SECTION 1BUILDING WORKS (K) PAINTING,VERNISHING ETC A. ORIGINAL WORKS2 (A) Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary :(b) On steel or other metal surface :With super gloss (hi-gloss) -(ii) Two coats (white in shade) 6 BUILDING WORKS (K) PAINTING, VERNISHING ETC?(A)ORIGINAL WORKS.(2)(A) Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary :(b) On steel or other metal surface : With other than hi-gloss of approved quality-(iv) Two coats (with any shade except white) 7 BUILDING WORKS (B) DISMANTLING, CUTTING CHASE, HOLESETC 10. Stripping off worn out plaster and raking out joints of walls, celings etc. upto any height and in any floor including removing rubbish within a lead of 75m as directed. 8 SECTION 1BUILDING WORKS (I) PLASTERING,POINTING ETC. A. ORIGINAL WORKS 1.Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface](ii) With 1:4 cement mortar (a) 20 mm thick plaster 9 SECTION 1BUILDING WORKS (K) PAINTING,VERNISHING ETC A. ORIGINAL WORKS 1 (b) Priming one coat on timber or plastered surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc. (This item is applicable to new work or old work when the original surface has been exposed by removal of old paint.) 10 SECTION 1BUILDING WORKS (K) PAINTING,VERNISHING ETC A. ORIGINAL WORKS2 (A) Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary : With other thanhi-gloss of approved quality-(ii) Two coats (white in shade) 11 SECTION 1BUILDING WORKS (K) PAINTING, VERNISHING ETC A. ORIGINAL WORKS2 (A) Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary :(a) On timber or plastered surface :With super gloss (hi-gloss) -(iv) Two coats (with any shade except white) 12 BUILDING WORKS (D) Flooring A. ORIGINAL WORKS 46.Supplying and laying chequered tiles of any shade & of approved quality with (1:1?:3) cement concrete laid in panels orpatterns as directed in pavement, footpath etc. including necessary underlay 25 mm thick [avg] cement mortar (1:3) complete in all respect with all labour and materials. [Using cement slurry @ 4.4 kg/Sq.m at back side and @2.4 kg/Sq.m for joint filling] Red Variety(i) 25 mm. thick 13 BUILDING WORKS (F) STRUCTURAL STEEL WORKS, GRILLS, GATES ETC. A. ORIGINAL WORKS 13. (a) M.S.or W.I. Ornamental grill of approved design joints continuously welded with M.S, W.I. Flats and bars of windows,railing etc. fitted and fixed with necessary screws and lugs in ground floor. (Add extra @ 1% for each addl. floor upto 4th floor and @ 1.25% for each addl. floor above 4th floor) ((ii) Grill weighing above 16 Kg./sq.mtr and above. (MODE OF MEASUREMENT):-The weight of grill per sq.m. will be determined by taking the physical weight of fabricated grill and dividing the same by covered area of the same. N.B. No shop priming will be allowed to facilitate inspection of workmanship. Weight of grill is to be taken after final grinding and finishing the weld. 14 BUILDING WORKS (K) PAINTING, VERNISHING ETC?(B)MISCELLANEOUS ITEMS.(3)Removing old paint from blistered painted surface of steel or other metal by chipping including scraping and cleaning and exposing the original surface.N.B.:(Payment against item (1, 2, 3, 4) of subhead B will be made only when done at specific direction of the Engineer- in-charge. Cost of taking out shutter etc.for this item and rehanging the same or changing glass panes cracked or broken in the operation will be deemed to be covered by the rate of this item and no seperate payment therefore shall be made.) 15 SUPPLY, FITTING & FIXING OF SPRING RIDERS (HORSE, FROG, SEAT, DOLPHIN & DUCK): AREA REQUIRED APPROX 3 FT X 1.2 FT; SAFE PLAY AREA: 5 FT X 2.5 FT; CHARACTER: MOULDED FRP IN SPRAY PAINT FINISH: MECHANISM: BASE & TOP 6MM M.S.PLATE WITH CAST IRON HOUSING & M.S.HOUSING WITH GUN METAL BUSH & 1 DIA. M.S.SHAFT FULCRUM SUPPORTED BY 2 NOS. 10 X 5 O.D. 12 MM DIA. SPRING: PAINT ETCH & ROZCR PRIMER ON G.I. SURFACE AND RED OXIDE METAL PRIMER ON BASE & TOP PLATE, SPRING AND HOUSING WITH 2 COATS OF BERGER LUXOL PAINT 16 Sub Total 17 GST 18% 18 CESS 1%
