Tender For Furniture Supply In Svgms Govt. School Dual Desk Attached Chair , Class Room Table ( Dual Desk) With Attached Chair The Product Should Be In Complete Knock Down Structure As Much As Possible/Feasible Enabling Ease In Transportation And Assembli, jodhpur-Rajasthan

Tender For Furniture Supply In Svgms Govt. School Dual Desk Attached Chair , Class Room Table ( Dual Desk) With Attached Chair The Product Should Be In Complete Knock Down Structure As Much As Possible/Feasible Enabling Ease In Transportation And Assemblies Within Classrooms.The Panels Are Made From 18 Mm Thk Pre-Laminated Mdf (Wooden Colour Laminate) ( Is 14587) With 2 Mm Pvc Edge Banding (Coour Same Laminate Match) On All Sides.Top Dimension Shall Be 980 X 355Mm. Top Height Shall Be 670Mm. Seat Dimension Shall Be 980 X 300Mm. Seat Height Shall Be 360Mm. Back Dimensions Shall Be 980 X 150Mm. Size May Vary +/- 5Mm. The Under Structure Is Made Of Erw Tubes[Is 7138] 25.4 ±0.3Mm X 25.4 ±0.3Mm X1.2 ±0.096Mm Thk Powder Coated 50Microns(±10)At Base Which Are Welded To The Desk And Seat Supports That Are Made Of Ms C Sections 29+/-0.3Mm X 24.9+/-0.3Mm X 1.2+/-0.096Mm Thick Powder Coated 50Microns (±10). Stiffeners That Are Provided Between The 2 Vertical Frames At Base And Back Of Seat Are Made From Erw Tubes[Is 7138] 25.4 ±0.3Mm X 25.4 ±0.3Mm X1.2 ±0.096Mm Thk Powder Coated 50Microns (±10). The Tubes Are Closed With Plastic Caps. Additional Horizontal Supports Of Erw Tubes[Is 7138] 25.4 ±0.3Mm X 25.4 ±0.3Mm X1.2 ±0.096Mm Thk Powder Coated 50Microns (±10) Are Placed Between Front Legs And Between Back Legs To Add The Rigidity Of The Structure. The Storage Shelves Are Made From 0.6 ±0.09Mm Thk Powder Coated 50Microns(±10) Ms Sheet Which Is Affixed Below The Desk Top. Hooks Are Provided On Either Sides Of The Vertical Frame Of The Desk, For Hanging Bags/Bottles. They Are Made From 6.0 Mm Dia Ms Rods Powder Coated 50Microns (±10) The Under Structure Is Assembled Using M5 Trilobular Taptite Screws. Nylon Studs Are Provided On Bottom Side Of Rh/Lh Frame. All Fabricated Parts Which Require Welding Are Mig / Spot Welded. The Screw Joining Wooden Panels To Under Structure Are Chip Board Screws. All Steel Structural Components Shall Be Made From Virgin Material And Tested Conforming To Is: 513/ Is: 10748/ Is: 2062/ Is: 7138. Recycled Steel Will Not Be Accepted. Top Understructure – 900Mm (W) X 287Mm(D). Back Panel Support – 900Mm(W) X 255Mm(H). Seat Support – 900Mm(W) X 232Mm(D). 3D View Is As Under:-

INR 1000 /-

INR 90000.0 /-

INR 45 Lakhs /-

FileName	File Description	File Size
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB