Tender For Repair And Maintenance Of Baba Neer Pipeline Near Baba Mandir And Operation And Maintenance Of Etp At Q Complex For One Year, Including All Pipeline And Equipment Replacement Or Repairs As Per Requirement, deoghar-Jharkhand

Repair And Maintenance Of Baba Neer Pipeline Near Baba Mandir And Operation And Maintenance Of Etp At Q Complex For One Year, Including All Pipeline And Equipment Replacement Or Repairs As Per Requirement-1 Dismantling plain cement or lime concrete work including stacking serviceable materials in countable stacks within 15M. Lead and disposal of unserviceable materials with all leads all complete as per direction of E/I. 2 Taking out existing CC interlocking paver blocks from footpath/ central verge, including removal of rubbish etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per direction of Engineer-in-Charge. 3 Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.For thickness of tiles above 25 mm and up to 40 mm 4 Earthwork in excavation in foundation trenches in ordinary soil (vide classification of soil item-A) and disposal of excavated earth as obtained to a distance upto 50 M. including all lifts, levelling, ramming the fouda removing roots of trees, shrubs all complete as per approved design, building specification and direction of E/l. 5 Earth filling in foundaion trenches and plinth in layers not exceding 150 mm thick well watered, rammed, fully compacted and fine dressed with earth obtained from excavation of foundation trenches within a lead of 50 M and lift of 1.5 M all complete as per building specification and direction of E/I. (mode of measurement compacted volume) 80% in Backfilling 6 Providing coarse clean sand in filling in foundation trenches or in plinth including ramming and watering in layers not exceeding 150mm thick with all leads and lifts including cost of all materials, labour, royalty and taxes all complete as per building specification and direction of E/l (Mode of measurement complacted volume). 7 PCC 1:1.5:3 (1 Cement: 1.5 coarse sand (zone-1l1):3 graded stone aggregate 20 mm nominal size) 8 Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge. 80 mm thick C.C. paver block of M-30 grade with approved color design and pattern. 50% of Item no. 02 9 40 mm thick rubbed stone flooring over 20 mm (average) thick base of cement mortar 1:5 (1 cement : 5 coarse sand) with joints 3 mm thick, side buttered with cement mortar 1:2 (1 cement : 2 stone dust) admixed with pigment to match the shade of stone and pointing with same mortar.Red sand stone 10 Providing and fixing of ETP of Design Capacity-100 KLD , influent Fow Rate - 5 cum.m/hour.INLET (Assumed):- pH- 6.5-8.0Outlet (we will maintain the treated water characterstics):- pH-7.0-7.5, BOD 5days @20deg.C - <30mg/lt. COD -<100 mg/lt. <30mg/lt, Oil &Greace - <10mg/lt.Total Cost of ETP = 1650000.0010% of ETP Cost for ETP Maintanance and including hypochlorite chemicals 11 Pump Driver/Pump Operator, Class-I 12 Providing and fixing G.I fittings of approved make all complete as per specification and direction of E/I. Elbow 32 mm dia 13 TEE (PLAIN) 32 mm dia 14 NIPPLE 32 mm dia 15 PLUGS 32 mm dia 16 SOCKET 32 mm dia 17 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. 18 Supplying Submersible pump sets confirming to IS 8034 and motor conforming to IS 9283. Pump shall be suitable for various delivery head and discharge with stainless steel pump shaft and polypropylene/ noryl impeller. Motor sutable for working on 415V+10%, 3PH, 50 HZ, A.C. supply withg cable gaurd, thrust carbon/ fiber bearing to withstand entire hydraulic thrust, water proof winding shall be providing. the pump set shall be sutable for direct coupling, Pump shall have suitable outlet as per manufactures design. Anti thrust stream lined non return vave shall be provided with pump. 3 meter submersible copper conductor cable in single/ double run shall be provided with each pump. (1.5 HP) 19 Copper Cable 3 core PVC insulated, PVC sheathed copper conductor flat submersible cable3 core 2.5 sq mm etc

INR 5000 /-

INR 29905.0 /-

INR 14.95 Lakhs /-

FileName	File Description	File Size
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB