Bid Documents For Annual Rate Contract For Various Activity Related To Garden Repairing And Other Work For Porbandar Municipal Corporation Of South Zone, Porbandar, Dist.:Porbandar.-1.00 Demolition and disposal of unserviceable materials with all lead and lift.(i) Lime concrete. 2.00 Demolition and disposal of unserviceable materials with all lead and lift.(i) Cement concrete. 3.00 Demolition including stacking of serviceable materilas and disposal of unserviceable materials with all lead and lift. (i) R.C.C. work 4.00 Demolition of Brick work and stone masonry including stacking of serviceable materilas and disposal of unserviceable materials with all lead and lift. (i) In Lime Mortar. 5.00 Demolition of Brick work and stone masonry including stacking of serviceable materilas and disposal of unserviceable materials with all lead and lift.(ii) In Cement Mortar 6.00 Dismentaling tiled of stone floors laid in mortar including stacking of serviceable materilas and disposal of unserviceable materials with all lead and lift. 7.00 Dismantling Kerb Stone (Dismantling kerb stone by manual means and disposal of dismantled material with all lifts and up toa lead of 1000 metre) 8.00 Dismantling Kerb Stone channel (Dismantling kerb stone channel by manual means and disposal of dismantled material with all lifts and up to a lead of 1000 metre) 9.00 Dismentling steel work including distempering and stacking the materials with all lead and lift. 10.00 Dismentling doors, windows, ventilators etc. (wood or steel) shutters including chowkhats architraves, holdfasts and other attachment etc. complete and stacking them within all lead and lift.(i) Not exceeding 3 Sq.M. in area. 11.00 Dismentling doors, windows, ventilators etc. (wood or steel) shutters including chowkhats architraves, holdfasts and other attachment etc. complete and stacking them within all lead and lift.(ii) Exceeding 3 Sq.M. in area. 12.00 Dismentling barbed wire in fencing including making rolls and also including dismentling fencing posts including all earth work concrete in base and making good the disturbed ground stacking useful materials as directed and disposing as directed and disposing of the unserviceable materials with all lead and lift. 13.00 Dismentling C.I. pipes G.S.W.pipes abd A.C. rain water pipes with fittings and clamps including stacking the materials with all lead and lift ( for any dia, of pipe)ITEM NO DESCRIPTION 14.00 Excavation for foundation upto 1.5 m depth including sorting out and stacking of useful materials and disposing off the excavated stuff upto 50 Meter lead.(A) Loose or soft soil 15.00 B) Dense or Hard Soil 16.00 C) Hard Murrum 17.00 D) Soft rock not requiring blasting 18.00 E) Hard rock. 19.00 Excavation for foundation for depth from 1.5 m to 3.0 m including sorting out and stacking of useful materials and disposing off the excavated stuff upto 50 Meter lead.(A) Loose or soft soil 20.00 B) Dense or Hard Soil 21.00 C) Hard Murrum 22.00 D) Soft rock not requiring blasting 23.00 E) Hard rock. 24.00 Box cutting the road surface to proper slope and camber for making a base for road work including removing the excavated stuff and depositing on the road side slope as directed upto 50Mt.lead. 25.00 Filling available excavated earth (excluding rock) in trenches. plinth, sides of foundations etc. in layers not exceeding 20 cm. in depth consolidating each disposited layer by ramming and watering. 26.00 Filling in plinth with sand under floors including watering ramming, consolidating and dressing complete 27.00 Filling in foundation and plinth with murrum or selected soil in layers of 20cm. thickness including watering, ramming and consolidating etc. complete. 28.00 Filling in foundation and plinth with brick Bats Chhara in layers of 20cm. thickness including watering, remming and consolidating etc. complete. 29.00 Dispossing of Garden waste(any type of construction waste, horticulture waste, electrical waste, any type of waste) upto 5 km. 30.00 Supplying of crushed stone aggregates, chippings etc. of hard stone of following nominal size free of disintegrated pieces deletarious and oraganic mater (for Bitumen surface dressing etc.) and grading as per I.R.C. Code. 40 to 63 mm 31.00 Spreading the stone aggregate for rolling and W.B.M. including filling the interstices to required camber and gradient (excluding spreading of Blindage)(ii) 40mm to 63mm size aggreagates (H.B.) 32.00 Supplying of crushed stone aggregates, chippings etc. of hard stone of following nominal size free of disintegrated pieces deletarious and oraganic mater (for Bitumen surface dressing etc.) and grading as per I.R.C. Code.(vii) 6mm 33.00 Supplying of hard murrum 50mm to 150mm size. 34.00 Supplying of coarse clean sharp sand at site. 35.00 Providing & fixing of White River (Stone) Pebbles size of 2 to 2.50 dia in natural colour at site of work including loading, unloading, carriage and all taxes paid etc.and as per direction of officer in charge. 36.00 Rolling and consolidation of soling including filling in depression which occur during the process, with power roler 8 tonne to 12 tonne 37.00 Rolling and consolidating water bound macadam (except laterite and Kankar) including watering not exceeding 150mm thickness (Main layer including binding materials ) including filling in depressions which occur during the process.(A) With power roller exceeding 8 tonne and not exceeding 12 tonne. 38.00 Hire charges for Tractor Breaker 39.00 Providing and laying cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 Machine cut stone aggregate 40mm nominal size ) and curring complete including cost of formwork in (a) Foundation and plinth 40.00 Providing and laying cement concrete 1:2:4 (1- Cement : 2- Coarse sand : 4- graded stone aggregates 20 mm nominal size) and curing complete including cost of formwork in (A) Foundation and Plinth 41.00 Providing and laying controlled cement concrete M.250 and curing complete including the cost of formwork but excluding the cost of reinforcement for reinforced concrete work in (A) Foundations, footings, Base of columns and Mass concrete. 42.00 Providing and laying controlled cement concrete M.250 and curing complete including the cost of formwork but excluding the cost of reinforcement for reinforced concrete work in Lintels, Beams, Girders and Cantilever 43.00 Providing and laying controlled cement concrete M.250 and curing complete including the cost of formwork but excluding the cost of reinforcement for reinforced concrete work in column - square / rectangular ITEM NO DESCRIPTION 44.00 Providing and laying controlled cement concrete M.250 and curing complete including the cost of formwork but excluding the cost of reinforcement for reinforced concrete work in column - circular 45.00 Providing and laying controlled cement concrete M.250 and curing complete including the cost of formwork but excluding the cost of reinforcement for reinforced concrete work in Slabs,landing,shelves,Balconies, upto 200 mm in thickness. 46.00 Providing and laying controlled cement concrete M.250 and curing complete including the cost of formwork but excluding the cost of reinforcement for reinforced concrete work in Slabs,landing,shelves,Balconies, above 200 mm in thickness. 47.00 Providing and laying controlled cement concrete M.250 and curing complete including the cost of formwork but excluding cost of reinforcement for reinforced concrete work in (B) Walls, from top of foundation level upto floor two level 48.00 Providing and laying controlled cement concrete M.200 and curing complete including the cost of formwork but excluding the cost of reinforcement for reinforced concrete work in (E) Staircases excluding landing upto floor two level 49.00 Supplying cutting, bending, binding and placing in position steel as per plan and design and as per ISS 2502 including cost of steel and binding wire for reseNoirslstructures only including ift up to 6 meter height or depth below G.L. for all diameters - Do-CRS steel all diameter Fe 500grade confirming to relevant I.S. 50.00 White Stone Bela mesonry block in course in superstructure with stone of approved quality in Lime Mortar 1:5 (1- Cement :5- course sand) including packing the joints etc. complete. 51.00 White Stone Bela mesonry block in course in superstructure with stone of approved quality in Lime Mortar 1:6 (1- Cement : 6- course sand) including packing the joints etc. complete. 52.00 White Stone Bela mesonry work in partition walls upto 15 cm thickness in cement Mortar 1:4 ( 1- Cement : 4- course sand) 53.00 Extra for half brick masonry in superstructure above plinth level upto floor two level. (B) Conventional ITEM NO DESCRIPTION 54.00 Uncoursed Rubble Masonry with hard stone of approved quality in foundations and plinth in Cement Mortar 1:5 (1- cement : 5-coarse sand including levelling up etc. complete 55.00 Extra for super structure above plinth level upto floor two level 56.00 Coursed rubble masonry with stone of approved quality in foundations and plinth in Cement Mortar 1:4 (1-Cement : 4- coarse sand) etc. complete. 57.00 Extra for super structure above plinth level upto floor two level 58.00 Pointing on coursed stone masonry with cement mortar 1:3 (1- cement : 3-coarse sand) (A) Flush pointing 59.00 Pointing on coursed stone masonry with cement mortar 1:3 (1- cement : 3-coarse sand) (B) Ruled pointing 60.00 Pointing on Uncoursed stone masonry with cement mortar 1:3 (1- cement : 3-coarse sand) (A) Flush pointing 61.00 Pointing on Uncoursed stone masonry with cement mortar 1:3 (1- cement : 3-coarse sand)(B) Ruled pointing 62.00 Providing 10mm thick cement plaster in single coat on brick/concrete walls for interior plastering upto floor two level and finished even and smooth in (i)Cement mortar 1:3 (1- cement:3-sand) 63.00 Providing 15mm thick cement plaster in single coat on Rough (Similar)side of single or half brick walls for interior plastering upto floor two level and finished even and smooth in (i) Cement mortar 1:3 (1-cement:3-sand) 64.00 20mm thick sand faced cement plaster on walls upto height 10 metres above ground level consisting of 12mm thick backing coat of C.M. 1:3 (1-cement : 3-sand) and 8mm thick finishing coat of C.M. 1:1 (1-cement : 1-sand) etc. complete. 65.00 Removing dry or oil bound distemper by a washing and scraping and sand papering the wall surface smooth including necessary repairs to scratches complete 66.00 Distempering with dry distemper of approved brand and manufacture (two coats) and of required shade on wall surfaces of given an even shade, over and including a priming coat of whiting after thoroughly brooming the surface free from mortar dropping and other foreign matter. 67.00 Wall primer: Applying priming coat on wall surface after the surface to give an required shape even shade after thoroughly brushing the surface to remove all dirt, and remains of loose powdered materials.etc complete 68.00 White washing with lime on wall surface (two coats) to give an even shade including thoroughly booming the surface to remove all dirt, dust; mortar drops and other foreign matter. 69.00 Colour washing with lime on wall surface (two coats ) over and including a primary coat of white washing to give an even shade after through brooming the surface to remove all dirt, dust, mortar drops and other foreigh matter. 70.00 Finishing wall with water proofing cement paint of on wall surfaces (Two coats) to give an approved brand and manufacture and required shape even shade after thoroughly brushing the surface remove all dirt and remains of loose powered materials. 71.00 Extra for every subsequent coat of water proofing cement paint approved brand and manufacture. 72.00 Finishing wall with weather proof exterior emulsion paint on wall surface (two coats) to give an required shape even shade after thoroughly brushing the surface to remove all dirt, and remains loose powdered materials.etc complete 73.00 Wall artistic 3D paint: The work includes surface preparation, priming, and the application of theme-based artistic wall painting roadside compound walls and other structures. Surface preparation involves removing loose particles, dust, grease, and old paint using wire brushes, sandpaper, and high-pressure water jetting. Any cracks or uneven surfaces shall be filled with an approved exteriorgrade putty and leveled for a smooth finish. A weather-resistant, anti-fungal primer shall be applied to enhance adhesion and durability. The painting shall be executed using high-quality, UVresistant acrylic or emulsion paints suitable for outdoor conditions, ensuring resistance to fading, peeling, and moisture damage. The theme-based 3D design shall be pre-approved and executed manually by skilled artists using a combination of brushes, rollers, and spray techniques to achieve detailed artistic effects. A final protective coat of clear weatherproof and anti-graffiti varnish shall be applied to enhance longevity and protect against vandalism and environmental elements. The work shall be carried out as per approved designs, ensuring aesthetic appeal and structural integrity. ITEM NO DESCRIPTION 74.00 Wall artistic 2D paint: The work includes surface preparation, priming, and the application of theme-based artistic wall painting on roadside compound walls and other structures. Surface preparation involves removing loose particles, dust, grease, and old paint using wire brushes, sandpaper, and high-pressure water jetting. Any cracks or uneven surfaces shall be filled with an approved exteriorgrade putty and leveled for a smooth finish. A weather-resistant, anti-fungal primer shall be applied to enhance adhesion and durability. The painting shall be executed using high-quality, UVresistant acrylic or emulsion paints suitable for outdoor conditions, ensuring resistance to fading, peeling, and moisture damage. The theme-based 2D design shall be pre-approved and executed manually by skilled artists using a combination of brushes, rollers, and spray techniques to achieve detailed artistic effects. A final protective coat of clear weatherproof and anti-graffiti varnish shall be applied to enhance longevity and protect against vandalism and environmental elements. The work shall be carried out as per approved designs, ensuring aesthetic appeal and structural integrity. 75.00 Providing and fixing M.S. grills of required pattern to wooden frames of windows etc. with M.S. flats at required spacings and frame alround, square or round bars with round headed bolts and nuts or by screws (A) Plain Grill. 76.00 (B) ORNAMENTAL GRILL 77.00 Applying priming coat over new steel and other metel surface after and including preparing the surface by throughly cleaning, oil,grease, dirt and other foreign matter and scoured with brushes fine steel wood, scrapers and sand paper with ready mixed priming paint brushing red lead. 78.00 Painting two coats (excluding priming coat) on new steel and other metal surface with enamel paint, brushing, interior to give an even shade including cleaning the surface an even shade including cleanicn the surface of all dirt, dust and other foreign matter. 79.00 Painting one coats (excluding priming coat) on previously painted steel and other metal surface with enamel paint, brushing to give an even shade including cleaning the surface of all dirt, dust and other foreign matter. 80.00 Extra for every subsequent coat of paint 81.00 Providing, fabricating, supplying, and fixing Galvanized Iron sections as per approved design, including vertical and horizontal members, diagonal bracing as required, decorative elements if any, and fully welded joints. The gate shall be provided with suitable hinges, tower bolts, locks, stoppers, handles, guide rollers (if sliding), and all necessary fixtures and fittings for smooth and secure operation, The surface shall be cleaned and prepared as per painting standards, followed by one coat of primer, one coat of PU-based primer, and two coats of approved quality paint of approved shade and make, applied uniformly with brush/spray. Painting shall be carried out as per manufacturer’s specifications to achieve a durable, corrosionresistant finish, The gate shall be installed in proper alignment and level, fixed rigidly to existing columns or steel supports using suitable anchor bolts/plates. All labour, tools, scaffolding, materials, and incidentals required to complete the work in all respects shall be included. 82.00 Dismentaling existing paver block and refixing including 35 mm Sand layer for levelling and filling the joint with sand in proper line and level as per guidlines of IRC : SP 63-2018 Complete. 83.00 Dismentaling existing paver block and refixing new concrete block same as existing including 35 mm Sand layer for levelling and filling the joint with sand in proper line and level as per guidlines of IRC : SP 63-2018 etc. Complete. 84.00 Providing and fixing pre-cast concrete kerb stone of gray cement based concrete block 30cm length,30cm height and 15cm thick of M250 grade concret as per approved design and including excavation for fixing in proper line and level,filling the joint with C:M 1:3 (1cement:3fine sand) etc complete. 85.00 Providing and fixing pre-cast concrete kerb stone of gray cement based concrete block 30cm length,30cm height and 15cm thick of M200 grade concret as per approved design and including excavation for fixing in proper line and level,filling the joint with C:M 1:3 (1cement:3fine sand) etc complete. 86.00 (i) Cast in Situ Cement Concrete M 20 Kerb with Channel (Construction of cement concrete kerb with channel with top and bottom width 115 and 165 mm respectively, 250 mm high in M 20 grade PCC on M10 grade foundation 150 mm thick, kerb channel 300 mm wide, 50 mm thick in PCC M20 grade, sloped towards the kerb, kerb stone with channel laid with kerb laying machine, foundation concrete laid manually, all complete as per clause 408) PCC M15 for Kerb base 87.00 (ii) PCC M20 for Kerb (Cast in Situ) 88.00 Providing and fixing pre-cast Rubber Dye / steel Dye inter locking concrete block 60mm thick with grade of concrete M300 pnumatic compressed / vibrated mechanically and as per approved design Confirming to IS 15658 : 2006 including 35 mm Sand layer for levelling and filling the joint with sand in proper line and level as per guidlines of IRC : SP 63-2018 etc. Complete. 89.00 Providing and laying 500x500x40 mm thick Turf paver (Turfpave XD) on 150 mm thick sub grade of compacted bed of 20 mm thick nominal size stone aggregate and base course and filling with 150 mm thick jamuna sand, including spreading, well ramming, consolidating and finishing smooth etc. all complete as per direction of Engineer-in-charge. 90.00 Providing and laying polished Kota stone slab flooring over 20mm (Average) thick base of cement mortar 1:6 (1-cement : 6-coarse sand) or L.M. 1.1.5 (1-Lime putty :1.5 - coarse sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing etc. complete. (A) 25mm thick 91.00 Providing and laying marble stone slab flooring over 20mm (average)base of cement mortar 1:6 (1-cement : 6 coarse sand) or L.M. 1:1.5(1- lime putty : 1.5 - coarse sand) laid and jointed with gray cement slurry including rubbing and polishing complete. (A) Marble slab 25mm thick 92.00 Providing and laying Granite stone slab flooring over 20mm (average)base of cement mortar 1:6 (1-cement : 6 coarse sand) or L.M. 1:1.5(1- lime putty : 1.5 - coarse sand) laid and jointed with gray cement slurry including rubbing and polishing complete. (A) granite slab 18 mm thick 93.00 Providing and laying 40mm thick marble chips flooring rubbed and polished (I.E. terrazo) to granolithic finish with under layer 30mm thick cement concrete 1:2:4 (1Cement:2-coarse sand :4-graded stone aggregate 10 mm and down gauge) and top layer 10mm thick with white, black or white and blak marble cihps of required sizes from 1mm to 4mm nominal size laid in cement marble powder mix 3:1 (3-Cement : 1-Marble powder by weight) in proportion of 4:7 (4- Cement :7-marble chips by volume) (B) Light shade pigment with white cement (In top layer only) 94.00 Providing and laying marble chips skirting (Terrazo) or dedo rubbed, and polished to Granolithic finish top layer 6mm white,black or white and black marble chips of size from smallest to 4mm nominalsize laid in cement marble powder mix 3:1 (3- Cement : 1 marble powder by weight ) in proportion of 4:7 (4-cement marble powder mix : 7 marble chips by volume) 20mm thick with under 14mm thick layer cement plaster 1:3 (1-cement : 3-coarse sand) (B) Light shade pigment with white cement (In top layer only) 95.00 Providing cement vata (10cm. x 10 cm. size) quarter round in cement mortar 1:1 including neat cement finishing, watering etc. complete. 96.00 Providing throating or plaster drip and moulding to R.C.C. Chhajja. 97.00 Providing and laying cement concrete flooring 1:2:4 (1- cement : 2- coarse sand : 4-graded stone aggregate 20mm nominal size) laid in one layer and finished with a floating coat of neat cement. (A) 40mm thick. 98.00 Providing and laying precast cement concrete tiles 20mm thick with aggregate of sizes upto 6mm laid on floors, treads of steps and landing on 20mm thick bed of cement mortar 1:6 (1-cement : 6- coarse sand) or L.M. 1:1.5 (1 - Lime putty : 1.5 - coarse sand) jointed with neat cement slurry with pigment to match the shade of tiles complete with precast tiles of (C) Dark shades using ordinary cement 99.00 Steel work, welded in built up setions framed work including cutting, hoisting, fixing in position and applying a priming coat of red lead paint. (A)In beams and joists, channels angles Tees, flats, with connecting plates or angle cleats as in main and cross beams. Hip and jack rafters, purlins conneted to common rafters and the like 100.00 (D) In trussses and trussed purlins, upto 25 M. span and 15 M. ovarall height. 101.00 Providing and fixing at site of work M. S. iron ladder with Rly. freight, loading. unloading, carting & all taxes etc. comp as directed including paints 2 coats etc comp 102.00 Labour charges for lowering laying, erecting, fixing, various size of M. S. section such as joints channel, angles plates With fabrications etc. complete. 103.00 Providing laying and jointing in true line and level 50mm U.P.V.C. Pipe ( SCH- 40) for cold water including fittings as approved by Engineer In Charge. Pipe shall be fixed on the wall with the help of clamp at every two metre C/C or shall be concealed as directed including necessary fittings etc. including testing of pipe and joints and fixing the same with adhesive solvent, including cost of materials. 104.00 Providing and supplying in standard length ISI mark rigid unplasticised PVC pipes suitable for potable water with ring fit joint including cost of rings, as per IS specification no. 4985/1988 including all local and central taxes, transportation, freight charges, octroi, inspection charges, loading, unloading, conveyance to departmental stores and including cost of jointing meterial etc. complete. Test Pressure 10 Kg/cm2. -- 63mm dia. 105.00 75 mm dia. 106.00 90 mm dia. 107.00 110 mm dia. 108.00 125 mm dia. 109.00 140 mm dia. 110.00 160 mm dia. 111.00 180 mm dia. 112.00 200 mm dia. 113.00 225 mm dia. 114.00 250 mm dia. 115.00 280 mm dia. 116.00 315 mm dia. 117.00 Lowering, laying, fixing and jointing PVC/uPVC/cPVC pipes and specials of following class and diameter including cost of conveyance from stores to site of works including cost of labour, material, cement solvent. giving satisfactory hydraulic testing as per ISi code. 63 MM DIA 118.00 75 mm dia. 119.00 90 mm dia. 120.00 110 mm dia. 121.00 125 mm dia. 122.00 140 mm dia. 123.00 160 mm dia. 124.00 180 mm dia. 125.00 200 mm dia. 126.00 225 mm dia. 127.00 250 mm dia. 128.00 280 mm dia.129.00 315 mm dia. 130.00 Providing and fixing to wall, ceiling and floor galvanised Mild steel tubes (Medium grade) of the following nominal bore, tube fitting and clamps including making good the wall ceiling and floor.(A) 15mm 131.00 (B) 20mm 132.00 (C) 25mm 133.00 (D) 32mm 134.00 (E) 40mm 135.00 (F) 50mm 136.00 Providing laying (to level or slopes) and jointing reinforced concrete Light duty non-pressure pipes I.S. class NP2 of the following internal diameter with collars and butt ends prepared for collar joints including testing of joints complete.(B) 150mm 137.00 (C) 250mm 138.00 (D) 300mm 139.00 (E ) 450mm 140.00 (f) 500mm 141.00 (G) 600mm 142.00 (H)) 900mm 143.00 (K) 1000mm 144.00 (M) 1200mm 145.00 Providing and fixing Gun metal check or non-return fullway wheel valve.(A) 15mm dia. 146.00 (B) 20mm 147.00 (C) 25mm 148.00 (D) 32mm 149.00 (E) 40mm 150.00 Providing and fixing brass screw down stop tap.(A) 15mm dia. 151.00 (B) 20mm 152.00 (C) 25mm 153.00 Providing and fixing screw down bib taps of following size.(A) Brass screw down bib tap polished bright. (i) 15mm dia. 154.00 (A) Brass screw down bib tap polished bright. (ii) 20mm dia. 155.00 Providing and fixing screw down bib taps of following size.(B) Brass chromium plated screws down Bib Tap. (i) 15mm dia. 156.00 (B) Brass chromium plated screws down Bib Tap. (ii) 20mm dia. 157.00 Providing and fixing screw down bib taps of following size.(C) Gun metal screw down bib tap. (i) 15mm dia. 158.00 (C) Gun metal screw down bib tap. (ii) 20mm dia. 159.00 Providing erecting and fixing double coated ISI water tank required capacity each with all necessary fittings and connection etc. complete on terrace Providing and Fixing Outdoor Gym Equipement including cost of site cearing, excavation, PCC Foundation and Installation of equpement as per instruction given by engineer in charge. Using GI Hotdeep 200 temp Galvanising Process including finishing work. Including FOR 160.00 Air Walker 161.00 Chest Press / Sholder Press 162.00 leg press / twister 163.00 Aboard 164.00 Bicycle 165.00 Arm exerciser 166.00 Children play combo 167.00 Providing & supplying 120 L Dustbin 168.00 Precasting and placing in position 125 mm dia Bollards 600 mm high of required shape including providing M.S. Pipe Sleeve 50 mm 300 mm long in the Bollard and M.S. Pipes 40 mm dia and 450mm long with 150x150x6mm M.S. plate welded at bottom and embedded 150mm in cement concrete 1:3:6 (1 Cement : manufactured sand derived from Recycled Concrete Aggregate (RCA) : 6 graded stone aggregate 20 mm nominal size (Recycled Concrete Aggregate (RCA)), including necessary excavation of size 250x250x450mm deep for the same in itumen/ concrete pavement at specified spacing 169.00 Providing and supplying RCC turfted lathery Bench Garden Bench with armrests, suitable for outdoor use in Gujarat, manufactured using M-30 grade reinforced cement concrete (RCC) / Pre cast with smooth finish and weather-resistant properties. The bench shall have an overall length of approximately 1500 mm, a seat width 450 mm, and a total height of 900 mm, with a backrest height of 450 mm from the seat. It shall be designed to accommodate three persons and shall be supported on sturdy RCC legs with integrated armrests for enhanced comfort and durability. The concrete components shall be reinforced with TMT bars of a minimum 8 mm diameter as per structural design requirements including paints. The surface shall be finished with a protective anti-carbonation coating for extended life. The bench shall be installed at designated locations as per site requirements, with the rate including transportation, loading, unloading, and installation, complete as per the engineer-in-charges instructions. 170.00 Writing letter or figures on any surface with black japan paint (stops,comas, hyphens and the like not to be measured and paid for separately)(i) Block (Letters/Figures) (Per 10 Letter pet CM.HT) 171.00 Writing letter or figures on any surface with black japan paint (stops,comas, hyphens and the like not to be measured and paid for separately) (ii) Indian (Letters/Figures) 172.00 Painting lines, deashes, arrows, letters etc on roads, Air fields and like in two coats with road marking paint, brushing including cleaning the surface of all dirt, dust and other foreign matter. (i) Over 10cm in width 173.00 (ii) Upto 10 cm in width 174.00 Providing and fixing 1.20 Metre high fencing with 2.0 Metre long M.S. Angle posts 40mm x 40 mm x6 mm and oil painting 3 coats fixed at 2.5 Mt,C/c. with five Horizontan lines and two diagonals of galvanised steel barbed wire weighting 9.38 Kg. per 100 Metre, strained and fixed to posts with G.I,staples including fixing the postsin ground with 0.5 M x 0.5.M x 0.5 M. block in C.C1:5:10 etc complete. 175.00 Providing, supplying, installing fountain White or Yellow Marble Fountain with 2 dish Height 6ft with 8ft G.I. B Class Heavy Ring with Adjustable Nozzles , Top Ring on the Marble Fountain, RGB LED Lights SS 304 18 watt / 12volt , Submersible Pump Klassic ISI , Starter, UPVC Piping of fully ountain Electrical Wiring inside the fountain tank, Syntax Box ,RGB Controller & SMPS and complete as per instruction given by engineer in charge 176.00 Providing, supplying, installing fountain 6ft G.I. B Class Heavy Ring With Adjustable Nozzles, 4ft G.I. B Class Heavy Ring With Adjustable Nozzles ,Ring Supporting Stand, RGB LED Lights SS 304 18 watt / 12volt , 2HP Submersible Pump Klassic ISI, Starter, UPVC Piping of fully fountain , Electrical Wiring inside the fountain tank, Syntax Box, RGB Controller & SMPS and complete as per instruction given by engineer in charge 177.00 Construction work of The ferrocement gazebo with stable RCC foundation, the frame structure of gazebo is made from steel rods (rebar) or mesh, layers of cement mortar should be strong and durable. It is equipped with built-in seating arrangements, integrated dustbins, and lighting fixtures. The seating is economically designed for 8/10 seater with smooth finishes, while the dustbins are incorporated seamlessly into the structure. The lighting system includes weather-resistant LED fixtures with provision for electrical wiring. Installation involves reinforced concrete footings (1 meter deep) and high tensile strength anchor bolts, with all joints welded and treated with anti-corrosive paint. The gazebo is finished with two coats of weather-resistant enamel paint and a concrete sealer. The design complies with IS 456:2000 standards and local building codes. etc. and complete as per instruction of engineer in charge. roof area shall be calculated for measurements. 178.00 The ferrocrete garden gate constructed with ferrocement with stable RCC Foundation, the frame structure of gate is made from steel rods (rebar) or mesh, layers of cement mortar should be strong and durable. It includes M.S. gate with heavy-duty galvanized steel hinges with ball bearings, a high-security multipoint locking system, stainless steel ergonomic handles, and adjustable pivots for alignment. Installation involves reinforced concrete footing (1 meter deep) and high tensile strength anchor bolts, with all joints welded and treated with anti-corrosive paint. The gate is finished with two coats of weather-resistant enamel paint and a concrete sealer. The design complies with IS 456:2000 standards and local building codes. complete as per instruction of engineer in charge. 179.00 Any Other Item if required as per R & B CIVIL(PORBANDAR) latest SOR 180.00 Uprooting rank vegetation and weeds by digging the area to a depth of 60 cm, removing all weeds and other growth with roots by forking repeatedly, breaking clods, rough dressing, flooding with water, uprooting fresh growths after 10 to 15 days and then fine dressing for planting new grass, including disposal of all rubbish with all leads and lifts. 181.00 Digging holes in ordinary soil and refilling the same with excavated earth mixed with manure or sludge in the ratio of 2:1 volume (2 parts of stacked volume of earth after reduction by 20% 1 part of stacked volume of manure after reduction by 8%) flooding with water, dressing including removal of rubbish and surplus earth, if any, with all leads and lifts (cost of manure, sludge or extra good earth if needed to be paid for separately) Holes 90 cm dia, and cm deep 182.00 supplying and stacking of good earth + cattle manure minimum 100 mm thick each material at site including royalty and carriage upto km lead complete including Mixing earth and sludge or manure and Spreading of sludge, dump manure and/or good earth(earth measured in stacks will be reduced by 20% for payment) 183.00 Providing and stacking of Duranta Golden, having ht.15 to 20 bushty shape with fresh and healthy leaves in 15 cm size of Earthen Pot / Plastic Pot & as per direction of the officer-in charge.. inclding Plantation of Hedge Plant /Ground cover at site i/c watering and removal of unserveiceable material’s as per direction of officer charge 184.00 Providing and stacking of Dalbergia sissoo (Seasam) of height 120- 135 cm. in big poly bags of size 25 cm as per direction of the officerin- charge.. inclding Plantation of trees at site i/c watering and removal of unserveiceable material’s as per direction of officer charge 185.00 Providing and stacking of Delonix regia (Gulmohar) of height 150- 165 cm. in big poly bags of size 25 cm as per direction of the officerin- charge.. inclding Plantation of trees at site i/c watering and removal of unserveiceable material’s as per direction of officer charge 186.00 Providing and stacking of Ficus religiosa (Peepal) of height 150-165 cm. in big poly bags of size 30 cm as per direction of the officer-incharge.. inclding Plantation of trees at site i/c watering and removal of unserveiceable material’s as per direction of officer charge 187.00 Providing and stacking of Azadirachta indica ( Neem ) of height 120- 130cm in big polybag of size 25 cm as per direction of the officer-incharge... inclding Plantation of trees at site i/c watering and removal of unserveiceable material’s as per direction of officer charge 188.00 Providing and stacking of Phyllanthus emblica (Amla) of height 150- 165 cm. in Big HDPE Bag as per direction of the officer-in-charge.. inclding Plantation of trees at site i/c watering and removal unserveiceable material’s as per direction of officer in charge 189.00 Providing and stacking of Foxtail palm of ht. 240-270 cm bottom girth 35-40 cm well developed in big size HDPE bags as per direction of the officer-in-charge.. inclding Plantation of trees at site watering and removal of unserveiceable material’s as per direction of officer in charge 190.00 Providing and stacking of Washingtonia filifea palm stem ht. 120- 135 cm with 8-10 healthy leaves lush green leaves well developed big size HDPE Bags as per direction of the officer-in-charge.. inclding Plantation of trees at site i/c watering and removal unserveiceable material’s as per direction of officer in charge 191.00 Providing and Displaying Bismarckia Palm 115 to 180 cm ht., well developed 12 and above good color fresh and healthy leaves in cm Cement Pot as per direction of the officer-in-charge... inclding Plantation of trees at site i/c watering and removal unserveiceable material’s as per direction of officer in charge 192.00 Providing and Displaying Fishtail palm well developed with fresh healthy foliage leaves of ht 210 to 240cm Specimen in 35 cm Cement Pot as per direction of the officer-in-charge.... inclding Plantation of trees at site i/c watering and removal unserveiceable material’s as per direction of officer in charge 193.00 Providing and Displaying Foxtail palm well developed with fresh healthy foliage of ht. 210 to 240 cm in big 40 cm Cement Pot as per direction of the officer-in-charge.... inclding Plantation of trees site i/c watering and removal of unserveiceable material’s as per direction of officer in charge 194.00 Grassing with selection No. 1 Doob grass including watering and maintenance of the lawn for 30 days or more till the grass forms thick lawn, free from weeds and fit for mowing including supplying good earth, if needed (the grass and good earth shall be paid for separately). With grass Turf 195.00 Preparation of beds for hedging and shrubbery by excavating 60 cm deep and trenching the excavated base to a further depth of 30 cm, refilling the excavated earth after breaking clods and mixing with sludge or manure in the ratio of 8:1 (8 parts of stacked volume of earth after reduction by 20%: one part of stacked volume of sludge or manure after reduction by 8%), flooding with water, filling with earth if necessary, watering and finally fine dressing, leveling etc. including stacking and disposal of materials declared unserviceable and surplus earth by spreading and leveling as directed, within a lead of 50 m, lift up to 1.5 m complete (cost of sludge, manure or extra earth to be paid for separately) 196.00 Providing & laying Selection no. 1 doob grass turf with earth 50mm to 60mm thickness of existing ground prepared with proper level and ramming with required tools wooden and than rolling the surface with light roller make the surface smoothen and light watering the same maintenance for 30 days or more till the grass establish properly,as per direction of officer in charge 197.00 Providing and stacking of Euphorbia caracasana (bronze colour leaves) of height 60-75 cm. with 4-5 branches in bag of size 25 cm as per direction of the officer-in-charge... inclding Plantation of shrubs at site i/c watering and removal of unserveiceable material’s as per direction of officer in charge 198.00 Providing and stacking of Bauhinia tomentosa (yellow) of height 60- 75 cm. in earthen pots of size 20 cm as per direction of the officer-incharge.... inclding Plantation of shrubs at site i/c watering and removal of unserveiceable material’s as per direction of officer in charge 199.00 Providing and stacking of Calliandra hybrida of height 75-90 cm. with 4-5 branches in bag of size 25 cm as per direction of the officer-incharge... inclding Plantation of shrubs at site i/c watering and removal of unserveiceable material’s as per direction of officer in charge 200.00 Providing and stacking of Cestrum nocturnum (Raat ki Rani) of height 60-75 cm. with 4-5 branches in bag of size 25 cm as per direction of the officer-in-charge ... inclding Plantation of shrubs at site i/c watering and removal of unserveiceable material’s as per direction of officer in charge201.00 Providing and stacking of Ficus blackii (F.vivion) of height 45-60 cm. with 6-8 branches healthy foliage in earthen pots of size 25 cm as per direction of the officer-in-charge... inclding Plantation of shrubs at site i/c watering and removal of unserveiceable material’s as per direction of officer in charge 202.00 Providing and stacking of Ficus panda of height 45-60 cm. with 6-7 ranches and healthy foliage in p.bag of size 25 cm as per direction of the officer-in-charge... inclding Plantation of shrubs at site i/ watering and removal of unserveiceable material’s as per direction of officer in charge. 203.00 Providing and stacking of Hibiscus rosasinensis of height 45-60 cm. with 3-4 branches in earthen pots of size 20 cm as per direction of the officer-in-charge.... inclding Plantation of shrubs at site i/ watering and removal of unserveiceable material’s as per direction of officer in charge 204.00 Providing and stacking of Gardenia jasminoides of height 45-60 cm. with 3-4 branches in earthen pots of size 20 cm as per direction of the officer-in-charge... inclding Plantation of shrubs at site i/ watering and removal of unserveiceable material’s as per direction of officer in charge 205.00 Providing and stacking of Largerstroemia indica of height 45-60 cm. in polybag of size 20 cm as per direction of the officer-in-charge.... inclding Plantation of shrubs at site i/c watering and removal of unserveiceable material’s as per direction of officer in charge 206.00 Providing and stacking of Allamanda cathartica of height 30 cm to 45 cm. in 20 cm size of Earthen pots / Plastic pots & as per direction of the officer-in-charge. 207.00 Providing and stacking of Bougainvillea (Variety Butiana, Lady Mary Baring, Mahara,Mohan,Scarlet Queen, Variegated, Glabra Formosa, Peruviana Odissi, Paratha, Subhra,Thimma, Spectabilis L.N Birla, Refulgens) of height 30 cm. to 45 cm. with 2-3 branches in 20 cm size of Earthen pots / Plastic pots & as per direction of the officer-incharge. 208.00 Providing and stacking of Clerodendrum splendens of height 30 cm to 45 cm. in 20 cm size of Earthen pots / Plastic pots & as per direction of the officer-in-charge. 209.00 Providing and stacking of Jasmine grandiflorum (chameli) of height 30 cm to 45 cm. in 20 cm size of Earthen pots / Plastic pots & as per direction of the officer-in-charge. . ITEM NO DESCRIPTION 210.00 Pruning, trimming, shaping of trees /shrubs (ht 15 feet and above) i/c removal of cut materials upto 50mt. Lead, as per direction of officer in charge. T&P shall be arranged by the contractor. 211.00 Paint on tree : Applying and Finishing with water based latex paint on tree surfaces (Two coats) to give an approved brand and manufacture and of required shape even shade after thoroughly brushing the surface to remove all dirt and remains of loose powered materials. 212.00 Work of Geru-lime paint around the trees planted on all road before removal of tree suckers in different area (00 to 1 Feet Dia.of tree) 212.10 Work of Geru-lime paint around the trees planted on all road before removal of tree suckers in different area (1 to 2 Feet Dia.of tree) 212.20 Work of Geru-lime paint around the trees planted on all road before removal of tree suckers in different area (2 to 3 Feet Dia.of tree) 212.30 Work of Geru-lime paint around the trees planted on all road before removal of tree suckers in different area (3 to 4 Feet Dia.of tree) 212.40 Work of Geru-lime paint around the trees planted on all road before removal of tree suckers in different area (more then 4 Feet Dia.of tree) 213.00 Painting on tree trunks for road side beautification work(00 to 1 Feet Dia.of tree) 213.10 Painting on tree trunks for road side beautification work(1 to 2 Feet Dia.of tree) 213.20 Painting on tree trunks for road side beautification work(2 to 3 Feet Dia.of tree) 213.30 Painting on tree trunks for road side beautification work(3 to 4 Feet Dia.of tree) 213.40 Painting on tree trunks for road side beautification work(more then 4 Feet Dia.of tree) 214.00 Artistic Paint on a tree : Providing and applying artistic painting existing tree trunks using weather-resistant, non-toxic acrylic emulsion paints in vibrant multicolor patterns (red, orange, yellow, green, blue, indigo, etc.). The work includes surface cleaning of the tree bark (dry brush method), application of a protective base coat (if required), and hand-painting with approved design by skilled artists. The paint shall be eco-friendly and safe for live trees. The design must be approved by the Engineer-in-Charge prior execution. Scope includes: all materials, labor, tools, and scaffolding if required, and as directed by the authority. 215.00 Providing and stacking of Achyranthes aspera (for mercury budha), Ficus racemosa (for venu or shukra), Butea monosperma (for Moon or chandra), Calotropis Procera (Sun or surya), Acacia Catechu (for Mars or mangal), Imperata cylindrica (for ketu), Prosopis cineraria (for satrun or shani), Cynodon dactylon (for Rahu) height 150-165 cm. in big poly bags of size 30 cm as per direction the officer-in-charge. 216.00 Replacig of the existing benches at located place or instruction given by engineer in charge 217.00 Providing and supplying with fixing of FRC type tree ring 450 mm open hole, with out to out 600 x 600 mm size including transportation, loading and unloading charges 218.00 Felling trees of the girth (measured at a height of 1 m above ground level), including cutting of trunks and branches, removing the roots and stacking of serviceable material and disposal of unserviceable materia Beyond 60 cm girth upto and including 120 cm girth 219.00 Felling trees of the girth (measured at a height of 1 m above ground level), including cutting of trunks and branches, removing the roots and stacking of serviceable material and disposal of unserviceable material Beyond 120 cm girth upto and including 240 cm girth 220.00 Providing and fixing M. S. tree guard 45 cm square in plan, height 1.20 metre above ground level and 0.40 metre below ground level. The vertical members shall consist of four nos. angle iron of size 25x25x3 mm, 1.6 m long, one at each corner and 8 nos flat iron of size 25x3 mm, 1.2 m long. The vertical mambers shall be welded to 4 nos. 25x6 mm M. S. flats placed horizontally around the vertical member of the cage. One name plate of 1 mm thick M.S. sheet of size 250x100 mm shall be welded to the tree guard near the middle height and lettered CPWD/ PWD/ any other approved name. The tree guard shall be fixed to the ground by making suitable holes and by embedding four corners leg in the ground, including refilling the earth, compaction etc. complete. The tree guard shall be painted with two or more coats of synthetic enamel paint of approved brand and manufacture over a coat of primer, complete in all respect. 221.00 Design, Supply, Installation and Commissioning of Landscape Irrigation components including Pressure pumping system 1(w+1s), Automation Controller, Cables, Valves, Sprinkler with Hydrant as required, Drip Irrigation of 1.2mm thickness brown color with necessary fittings, lateral stake and PVC pipes of PN6 and fittings and accessories PN10. 222.00 Half Bela circular tree guard in Bela, internal diameter 1.25 metre and height 1.2 metre above ground and 0.20 m below ground, bottom two courses laid dry and top three courses in cement mortar 1:6 (1 cement : 6 fine sand) and the intermediate courses being in dry honey comb masonry as per design complete: 223.00 Complete maintenance of trees, jobs like making of basin at regular interval,application of fertilizer etc, (excluding the cost of material which shall be supplied by the department and other T & P material/articles shall be provided by the contractor) as per direction of officer in charge for entire per month 224.00 Anti termite treatment by digging holes 300mm deep and 40 mm dia, 6 to 7 holes around the tree using chemical emulsion at the rate of 1.5 liter per hole in two time or more application to get the trees free from termite infection chemicals used Chlorpyriphos 20% EC in the ratio of 1% concentration and as per direction of officer-incharge. as per direction of officer-in-charge. 225.00 Any Other Item if required as per Horticulture / DSR latest SOR 226.00 Painting of street light pole with bracket complete with two coats of Aluminium paint for following size of pole.(C) up to 9 mtr 227.00 Providing, supplying, installing, testing and commissioning of Drop tree light ( 8 Stick Shower Watersrop tree Ligh) with all type of fixture including cost of providing proper connection with existing electrical arrangement 228.00 Providing, supplying, installing, testing and commissioning of LED ball light (Solar Bulb String Light) with all type of fixture including cost of providing proper connection with existing electrical arrangement 229.00 Providing, supplying, installing, testing and commissioning of Decorative LED rope light (Solar Rope Light) with all type of fixture including cost of providing proper connection with existing electrical arrangement 230.00 Providing, supplying, installing, testing and commissioning of Solar Garden Light with all type of fixture including cost of providing proper connection with existing electrical arrangement 231.00 Providing, supplying, installing, testing and commissioning of Decorative motif light with all type of fixture including cost of providing proper connection with existing electrical arrangement 232.00 Providing, supplying, installing, testing and commissioning of solar LED post top pole light, standalone, offgrid, solar power operated with all type of mechanical and electrical fitting, BIS approved. 233.00 (b) LED Bollard fittings of minimum height 600 mm & dia.100mm having polycarbonate clear/milky diffuser mounted on 3mm thick aluminium finished powder coated pipe with base plate 160x160mm with erection by M8x75mm fastner with required RCC foundation.IP65 for 9 to 20 watt ,surge-4kv- cat-III 234.00 Supplying ,installing, testing and commissioning of aluminium casting 15 Feet Vintage Pole Light , decorative architectural design light pole with 2 no. of LED lantern/luminaire, light bulb shall be 3- star, and < 120 watt efficacy, 0.5 meter ISI marked three core connecting wire, 65 IP protection of the entire housing as per IS 10322(part 1):1982 latest 2 year minimum warranty for free replacement of lighting system including lightsource, ITEM NO DESCRIPTION 235.00 Supply of approved make FRP Pole having following specifications: FRP Light Pole made by CNC filament winding machine using thermoset resin polyester/epoxy resin system) having minimum 62% glass content. The pole should be in one piece and tapered round shape, having smooth finish and should be totally free from corrosion as well as non conductive & shock proof Pole should be provided with FRP Anchor Base and it should be heavy duty, or MS Material duly painted with Epoxy paint. Pole should be flame retardant as per IS 6746. Resin used shall be UV resistance and pigmented. A highly weather resistant polyurethane coating shall be applied to the pole after applying suitable primer system that ensures proper adhesion of the paint. Minimum coating thickness shall be 80 to 100 micron. Deflection of the pole shall not exceed more than 10% of the length of pole for the given load“ Pole should be generally made as per the dimensional data, performance criteria and some interchangeability features of poles as per standard ANSI C 136.20 latest version or ASTM D 4923/01 including cable termination box with necessary accessories . The size of pole and type of installation with foundation as per manufacturer details and site requirement are as below . (1) Suitable for base plate mounting single arm Bracket. [J] Overall length of 7 Mtr.Average Thickness: 7.5mm. Top/ Bottom OD Dia A/F 89/183 mm ± 2mm approx. approx. Weight of Pole 40 kg approx. (Without Base) Anchor Base (Size 300X300 & 18mm th.) 236.00 ---as bove---(2) Suitable for base plate mounting Double arm Bracket. [E] Overall length of 7 Mtr. Average Thickness: 8mm.Top/ Bottom OD Dia A/F 114/183 mm ± 2mm approx. approx. Weight Pole 47 kg approx. (Without Base) Anchor Base (Size 300X300 18mm th.) 237.00 Providing FRP/GRP arm bracket of having 15˚ arm with 50 mm OD pipe *5 mm thk,1000mm long from pole centre (A) Single arm bracket 238.00 ----as above---(B) Double arm bracket 239.00 Supplying and erecting LED street light / Flood light fittings with High power White LEDs wattage of 3 Watt and above assembled on single MCPCB, efficiency more than 130 lm/w and corrosion free High pressure die cast aluminum housing with smooth finish powder coated and heat sink extruded aluminium with diffuser and Polycarbonate optics/ lenses, with toughened glass with company mark/name engraved or embossed 160 to 270 V,Power Factor more than 0.95, THD < 10 %, CCT 3000 K to 5700K,Uniformity ratio >0.45, Luminaire efficacy> 100 lumens/watt . LED driver efficiency > 85 %.( fittings required LM-79 & LM-80 certificates)(NOTE: Below description have shown ranges of Wattage capacity of LED fittings.The Engineer incharge may select any wattage capacity between the ranges shown.) (A) Street Light (IP-65), Surge protection -4KV integral and ,Light must have 440VAC line supply with over-voltage protection. (iv) above 90 to 120 watts Cat-lll 240.00 Providing & erecting approved make street light / wall mounting junction box compression moulded from DMC (thermoset plastic) vertical sliding cover having locking with square head stud loop in loop out in built terminal suitable for four core cable, waterproof I.P. 54 protected with clamp or bolt nut & earth bolt of following size. [A] 200mm x 127mm x 83 mm Size 241.00 providing and erecting Miniature circuit breaker single pole 6A 25A suitable to operate on 240 V A.C. system and having breaking capacity 10 KA to be erected in existing box. confirming to 8828/1996 with ISI Mark Cat.-III 242.00 Supplying & erecting XLPE (IS:7098)(i)-88 ISI unarmoured copper cable 1.1 KV grade to be erected as directed of following size (A) core 2.5 Sq.mm 243.00 Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand / Solid Copper conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe at road crossing or floor of following size of cables.. (b) 4 core 4 Sq. mm 244.00 Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand / Solid Copper conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe at road crossing or floor of following size of cables. (C) 4 core 6 Sq. mm 245.00 Supplying and erecting B class Galvanized iron pipe having smooth finished bore of the pipe on both ends erected nuts and bolts along the pole / wall shaping the pipe as per site requirement. Pipe dia following. 40 mm dia 246.00 Providing & laying approved make Double walled corrugated pipes (DWC) of polyethylene (conforming to IS 14930 II) with necessary connecting accessories of same material at required depth for laying of cable. below ground / road surface for enclosing cable and back filling the same to make ground as per original. (A)50 mm outer dia 247.00 Supplying & erecting IP 55 grade following size section pillar fabricated from joint less M.S. Sheet with angle iron legs made from jointless M.S. Angle with cable clamps to be buried in ground to have appropriate erection to work uniform until erected with cement concrete foundation and 45 cm high bricks work finishing with plaster etc. hinged double door internally supported on both side, with internal and outside looking arrangement with look and keys in duplicate 35 x 35 x 5 mm M.S. Angle of Two Nos. one is welded and other with nut and bolt for erecting Bakelite sheet. Painting the Section Pillar inside and out side with three tank powder coated paint. section pillar roof should be without joint with water leakage proof & tested as per IP 55 test & followed by IS 2147 of 1962 (C) 60 X 30 X 45 cm section pillar fabricated from 16 Gauge MS Sheet with angle iron legs 45 cm long made from 35 X 35 X 5 mm thick MS angle. 248.00 Supplying & erecting IP 55 grade following size section pillar fabricated from joint less M.S. Sheet with angle iron legs made from jointless M.S. Angle with cable clamps to be buried in ground to have appropriate erection to work uniform until erected with cement concrete foundation and 45 cm high bricks work finishing with plaster etc. hinged double door internally supported on both side, with internal and outside looking arrangement with look and keys in duplicate 35 x 35 x 5 mm M.S. Angle of Two Nos. one is welded and other with nut and bolt for erecting Bakelite sheet. Painting the Section Pillar inside and out side with three tank powder coated paint. section pillar roof should be without joint with water leakage proof & tested as per IP 55 test & followed by IS 2147 of 1962 (B) 75 X 60 X 45 cm section pillar fabricated from 16 Gauge MS Sheet with angle iron legs 45 cm long made from 35 X 35 X 5 mm thick MS angle. 249.00 Supplying & erecting approved make Digital time switch having lithium cell 6 years operative and operate battery backup 1 channel day clock with 14 memory programme, suitable to operate on 240V + 5%, 16A with, floating contacts Minimum switching setup time 1 minimum & LCD display. Also comprised permanent ON/OFF switching. Programming switches & housed in fire proof thermoplastic enclosure & transparent cover erected as required with necessary connection erected as directed. 250.00 Approved make Four pole moulded case circuit breaker having breaking capacity ICU of 25 KA. at 415 V,having normal current rating up to 25 A to 100A. with Fixed thermal & magnetic release suitable to work on A.C. supply 50 c/s. with all internal connections & complete erected in existing 16 G.M.S. housing. ICS=100% of ICU only - Cat III 251.00 Supplying and erecting approved make suitable panel indicator LED type lamp, lens cover, complete erected with necessary connections. 252.00 Pro. & erecting electronic overload relay with single phasing preventer [ (L&T, Alstom, BCH,T.C., Siemens, C&S make). [a] for 30 to 50 Amp. 253.00 Providing and erecting AC-3 duty 3 pole power contactor with 2 NO & 2 NC aux contacts complete with 415V/220V operating coil suitable for (L&T, BCH,T.C., Siemens, C&S make). (a) for 25 / 32 A rating 254.00 Providing 1:2:4 cement concrete foundation & 70 % PCC from bottom including excavation for the pole of size 60 x 60 x 120 cm. Deep in below ground level with plinth of 45 cm x 45 cm(or 45 cm dia x 45 cm) high upper ground level with necessary curing and finishing in approved manner. ( for 7.5 & 8/8.5 mtr pole) 255.00 Making trench in Soft rock/Hard Murrum / Tar Road of suitable width of 90 cms or required depth for laying any size of cable or locating the fault all over the run and back filling the same and making the surface as normal ground. 256.00 Supplying & erecting approved make Four Pole 415V change over switch interior for panel mounting with operating mechanism A.C.23 duty confirming to IS for (A)32-40A - Cat-lll 257.00 Supplying & erecting earth pit of minimum bore dia.150mm size approved make Earthing Electrode consisting Pipe-in-Pipe Technology as per IS 3043-1987 made of corrosion free hot dipped G.I.Pipes having Outer pipe dia of 50mm having 80-200 Micron galvanising, Inner pipe dia of 25 mm having 200-250 Micron galvanising, connection terminal dia of 12mm with constant ohmic value surrounded by highly conductive compound with high charge dissipation suitable for following type of applications with chamber and heavy duty cover. (A)(approved make OEM has to submit test certificate including value of earth resistance of installation duly stamped and signed by agency and officer Incharge has to ensure the value of earthing resistane mentioned in test Certificate) & having back filling compound of (B) Inner chemical (CCM Compound)- Resistivity:- 0.2 ohm / meter testing as per IEC 62561- 2017, Voltage drop:- < 1 volt at no load & dry form, Sulphar content:- <2%(C) Back fill Compound :- Earthing compound should be capable to retain moisture for long time Necessary test report must be submitted by Agency. (c) For Electrical Installation covering Transformer Neutrals, Lightning arrester Earthing, A.C.Plant & Sensitive Computer System(like Automation, SCADA) i.e independent Earthing in normal soil. Length of Pipe : 3.00 mtrs Back filling Compound :2 nos Bags of 25 Kg. 258.00 Dismantling the existing cables of all types & sizes 259.00 Dismantling the existing underground cable without damaging it with glands, cable end box including refilling the trench up to ground level and making coils complete to be placed at different store. 260.00 Dismantling the existing pole up to 6 m height with brackets, clamps, insulators, stay from the cement concrete foundation and making the site clear by refilling the pits with excavated materials and bringing it to the ground level. 261.00 Dismantling the existing pole above 6 m height with brackets, clamps, insulators, stay from the cement concrete foundation and making the site clear by refilling the pits with excavated materials and bringing it to the ground level. 262.00 Dismantling the existing any type of street light fittings on pole up to 6 mt height with bracket and making the site as original complete. 263.00 Dismantling the existing any type of fittings above 6 mt height pole from pole with bracket complete. Providing & erecting open well type horizontal mono block pump set with stainless steel body having following specification (A) 0.5 H.P. single phase open well motor pump set having discharge of 115 LPM @ 15 mtr. head suitable for 32 mm dia. delivery pipe with control panel 264 Cat. I 265 Cat. II (B) 0.75 H.P. single phase open well motor pump set having discharge of 170 LPM @ 20 mtr. head suitable for 25 mm dia delivery pipe with control panel 266 Cat. I 267 Cat. II (C) 1 H.P. single phase open well motor pump set suitable for 185 LPM discharge @ 25 mtr. head, suitable for 32 mm dia. Delivery pipe with control panel. 268 Cat. I 269 Cat. II (D) 1 HP Three phase open well motor pump set suitable for 190 LPM discharge @ 21 mtr. head, suitable for 32mm dia. delivery pipe. 270 Cat. I 271 Cat. II Providing & erecting open well horizontal mono block pump set with cast iron body, complete for three phase submersible motor having [A] For 1.5 HP 3 phase open well horizontal mono block pump set suitable for 190 LPM @ 20 mtr head suitable for 40 mm dia delivery pipe 272 Cat.I 273 Cat.II [B] For 2 HP 3 phase open well horizontal mono block pump set suitable for 200 LPM @ 25 mtr head suitable for 50 mm dia delivery pipe 274 Cat.I 275 Cat.II [C] For 3 HP 3 phase open well horizontal mono block pump set suitable for 85 LPM to 270 LPM @ 11 mtr to 33 mtr head suitable for 50/65 mm dia delivery pipe 276 Cat.I 277 Cat.II [D] For 5 HP 3 phase open well horizontal mono block pump set suitable for 1350 LPM to 310 LPM @ 10 to 42 Mtr head suitable for 50/65 mm dia delivery pipe 278 Cat.I 279 Cat.II [E] For 7.5 HP 3 phase open well horizontal mono block pump set suitable for 1550 LPM to 370 LPM @ 13.5 Mtr to 42 Mtr head suitable for 65/75 mm dia delivery pipe 280 Cat.I 281 Cat.II [F] For 10 HP 3 phase open well horizontal mono block pump set suitable for 1725 LPM to 940 LPM @ 15 to 36 MTR head suitable for 65/80 mm dia delivery pipe 282 Cat.I 283 Cat.II [G] For 12.5 HP 3 phase open well horizontal mono block pump set suitable for 1530 LPM to 950 LPM @ 24 to 40 MTR head suitable for 65/80 mm dia delivery pipe 284 Cat.I 285 Cat.II [H] For 15 HP 3 phase open well horizontal mono block pump set suitable for 1600 LPM to 1025 LPM @ 33 to 42 MTR head suitable for 65 /80 mm dia delivery pipe 286 Cat.I 287 Cat.II [I] For 20 HP 3 phase open well horizontal mono block pump set suitable for 1750 LPM to 1150 LPM @ 33 to 51 MTR head suitable for 65 /80 mm dia delivery pipe 288 Cat.I 289 Cat.II [J] For 25 HP 3 phase open well horizontal mono block pump set suitable for 1850 LPM to 1075 LPM @ 36 to 60 MTR head suitable for 65 /80 mm dia delivery pipe 290 Cat.I 291 Cat.II [K] For 30 HP 3 phase open well horizontal mono block pump set suitable for 2450 LPM to 1575 LPM @ 40 to 51 MTR head suitable for 80 / 100 mm dia delivery pipe 292 Cat.I 293 Cat.II 294 Multy Colour RGB LED Light 18W 12V DC (ss-316) With SS HANDLE 295 Multy Colour RGB LED Light 27 W 12V DC (ss-316) With SS HANDLE 296 Multy Colour RGB LED Light 36 W 12V DC (ss-316) With SS HANDLE 297 Providing, supplying, and fixing of C.I. Decorative street light pole as per given design and etc. including all cost. Complete 298 Water Drop Tree Light : Providing, supplying, and installation of Water Drop Tree Light, comprising a decorative lighting fixture designed in the form of cascading water droplets suspended from a tree-like structure, complete with energy-efficient LED bulbs. The fixture shall be fabricated using corrosion-resistant metal with a weatherproof finish suitable for outdoor use, including all necessary supports, mounting hardware, electrical connections, and accessories for proper installation and operation. The item shall be installed at the designated location as per the approved design and instructions of the Engineer-in-Charge, ensuring safety, durability, and aesthetic appeal. All work shall be completed in accordance with relevant specifications and standards. 299 Butterfly Solar Garden Light : Providing, supplying, and installation of Butterfly Solar Garden Light, featuring a decorative butterfly-shaped lighting fixture integrated with a high-efficiency solar panel and rechargeable battery system. The light shall be made of weatherresistant and durable materials suitable for outdoor garden use, with automatic dusk-to-dawn operation using energy-efficient LED bulbs. The fixture shall include all necessary components such as solar panel, stake or mounting base, internal wiring, and control circuitry, ensuring reliable performance and aesthetic enhancement of garden areas. Installation shall be carried out at specified locations as per the direction of the Engineer-in-Charge, in compliance with relevant standards and specifications. 300 LED Bold Light : Providing, supplying, and installation of LED Bold Light, comprising a high-intensity, energy-efficient LED lighting fixture designed for striking visual impact in outdoor or decorative lighting applications. The fixture shall be housed in a robust, weatherresistant body with a corrosion-proof finish, ensuring long-term durability and performance. The LED Bold Light shall include all necessary components such as mounting brackets, hardware, wiring, and connectors, suitable for safe and secure installation. The installation shall be carried out at specified locations as directed by the Engineer-in-Charge, in accordance with approved design, relevant standards, and safety regulations, ensuring optimal illumination and aesthetic appeal. 301 Neon Light Dance Party Decor Light Neon LED Lamp Flexible EL Wire Rope Tube Waterproof LED Strip – Only EL Wire -GREEN / Red / Blue / multicolor PVC Led Neon Light, IP66 Providing, supplying, and installation of 5M Neon Light Dance Party Decor Light, comprising Neon LED Lamp Flexible EL Wire Rope Tube of 5 meters length, suitable for vibrant decorative applications. The EL wire shall be supplied in GREEN / RED / BLUE / MULTICOLOR options, made of high-quality PVC material with IP66 waterproof rating, ensuring durability and suitability for both indoor and outdoor use. The neon rope light shall be flexible, energy-efficient, and capable of continuous illumination, ideal for outlining architectural elements or enhancing festive décor. The item includes only EL Wire with required accessories for installation, and shall be fixed securely at designated locations as per the direction of the Engineer-in-Charge, ensuring compliance with design intent, safety standards, and aesthetic appeal. 302.00 Supplying&erectingAmplifier having following specification: Power Output :250W (RMS) (300W Max.) inputs : 6 Misc. & 2 Aux. frequency Response :50-1500HZ I3db Tone Controls :Cut & Boost type LED Meter :5 LED Arrays The amplifier suitable to operate 240V A.C.& 24voltD.C. (Battery)with automatic change over from AC to Battery operation, dulyprotectedby wrong Battery Polarity connections. [[Approvedby Competent Authority i.e. not Below the rank of Executive Engineer ] Supplying & erecting Mixing Console having channels, Audiomixerwith.Echo facility for live performance, Auditorium & stadiums, having following features & facilities. [[Approved by Competent Authority i.e. not Below the rank of Executive Engineer ] (a)input Channels :-Each channel has separate 6.25mm size balanced phone jack for mike & line for balanced & unbalanced signals. (b)Individual gain control for sating optimum level for minimum noise. (c)BASS,MID&TREBLE‘controlsSeparatelyfor each input channel. (d)ECHO control for each channel (e)PANcontrol for echochannel for left or right output (f)AUXControl :Tocontrol , levelof thechannel in final mix to AUX sound output (g)Channel ON/OFF switch (h)ECHO Section :-ECHO, reverb & Chorus effect can be added to all input channel by different setting of Delay, Reverb & Level control. (i)Tape section (j)Aux. send & return For sending Pre-feeder output of channel for monitoring or adding a special effect unit. (k)Mono / Stereo output controls (L)Master faders to control over left & right output (m) Head phone output for monitoring purpose. Technical specification (a)Power Requirement-AC220-24OV 50 Hz DC 24 Volts(b)MIC Output Impedance/gain-2 K Ohms/ 62 dB (c)Line Output Balance/42 dB —-20 K ohms (d)Impedance/Gain:-10Kohmsunbalance / 42 dB (e)frequencyResponse-30Hz-20KHz L/R Line Output ( + 0, -1 dB ) (f)EqualizationBass/-+ /-12dBat 100Hz Mid / Treble /2 KHz / 10 KHz (g)Outputs,LineOutput LineOutputLow :10dB/-2dBM LineOutputHigh : 0dBM/ +17 dBM (775 mv / 5.5 V ) (h)S/Nratio LineOutputLevel :>70dB(0dB, 0.775V) The Console shall be mounted on standard Rack, The channel of following numbers. (A) 14 Channel Audio Mixer with ECHO 303.00 304.00 Supplying, Installing & testing approvedmake highly sensitivemicrophone capable topick up weak sound from longer distance&wider area suitable for stage shows, group singing with frequency response 50-16000 Hz. Having sensitivity of 1.6MV / Pa & impedance 250ohms(Lo- Z),Suppliedwithquickdetachable holder &10mtr. twin core cable&3pinXLR connector. [[Approved by Competent Authority i.e. not Below the rank of Executive Engineer ] 305.00 SITC of Horn loudspeaker, 10W, 7x8 High efficiency driver Excellent speech reproduction Provision for inside mounting of the optional line / loudspeaker supervision board Waterand dust protected to IP 65 EN 54‑24 certified [Approved by Competent Authority i.e. not Below the rank of Executive Engineer ] 306.00 Supplying & erecting XLPE(IS:7098) (I)-88 ISI unarmoured copper cable 1.1KV grade tobe erected as directed of following size. (E) 3 core 2.5 Sq. mm 307.00 Supplying and drawing of cable Fire Retardant PVC insulated copper conductor cable in the existing surface / recessed steel conduit of following pairs, cores and size including connections and interconnections etc. as required. 308.00 Any Other Item if required as per R & B ELECTRICAL latest SOR
