|
| 1 | POLISHING OF WOODEN FURNITURE:-M&L For preparation of old wooden polished surfaces with suitable sand paper / emery paper, well dusted and cleaning the surfaces,filling holes with putty and applying existing french/ melamine polish (in one or more coats) of superior quality to achieve uniform smooth texture and high glossy finish, complete all as specified and directed for the following wooden furniture items :- |
| 2 | Almirah medium wooden with shelves (Drg No. FD-19/19(m)/TP/ Usha/ Lexus) |
| 3 | Bed Plywood top(Drg No. FD-246/247/TP/ Usha Lexus) |
| 4 | Locker bed side/ Locker (Drg No.DB/ FD-54) |
| 5 | Table dressing Ladies with mirror (Drg No. FD-251/378/ Usha/ Lexus)) |
| 6 | Table 3\"X2\" (900X600/760mm) with/ without drawer (Drg No. FD-41/224/283) |
| 7 | Table Dining (120cmx90cm) (Drg No. FD/Map-II/03) |
| 8 | Chair dinning (Drg No. FD-262/279/228, FD/E6/Map-II/05/ Usha/ Lexus) |
| 9 | Chair writing (Drg No. FD-261/280) |
| 10 | Chair Easy (Drg No. FD-229/280/228) |
| 11 | Peg table(Drg No. FD-25/277/384) |
| 12 | Table bed Side (Drg No. FD-248/276/278) |
| 13 | Table writing (Drg No. FD-275/249/151/ Usha/ Lexus) |
| 14 | Teapoy (Drg No. FD-237/278/387) |
| 15 | Table center (Drg No. FD-235/274/375) |
| 16 | REPAIRS/RECANNING OF WOODEN CHAIRSRemoving old unserviceable plastic cane form wooden chair and providing new white colour plastic cane 2mm to 2.5mm wide,0.40mm thick for weavingin godrej pattern and 4mm wide plastic cane of 0.60mm thick for border work, complete all as specified and directed and as shown on drg, for the following type of chairs : |
| 17 | Chair Writing (Seat) (Drg No. FD-261/ 280) |
| 18 | Chair Easy (Seat & Back) (Drg No. FD-229) |
| 19 | Chair dining (Seat) (Drg No. FD-279/ 262) |
| 20 | M&L for removing old unserviceable plastic seat for chair dinning and S&F new plastic seat by means of adequate steel screw, complete all as specified and directed and as shown on drg . (Drg No. FD/Map-II/05) |
| 21 | M&L for removing unserviceable broken rear legs and supply and fixnew rear legs made out of 1st class hard wood teak suitable for existing chairs, complete all as specified and directed and shown on drg. for the following items :- |
| 22 | Chair Writing (Drg No. FD-261/ 280) |
| 23 | Chair Easy (Drg No. FD-229) |
| 24 | Chair dining (Drg No. FD-279/262) |
| 25 | Chair dining(Drg No. FD/Map-II/05) |
| 26 | M&L for removing unserviceable broken front legs and supply and fixnew front legs made out of 1st class hard wood teak suitable for existing chairs complete all as specified and directed and shown on drg. for the following items :- |
| 27 | Chair Writing (Drg No. FD-261/ 280) |
| 28 | Chair Easy (Drg No. FD-229) |
| 29 | Chair dining (Drg No. FD-279/262) |
| 30 | Chair Dining (Drg No. FD/Map-II/05) |
| 31 | Removing unserviceable broken side/front/back wooden member ofchairs and supply and fix new side/front/back wooden membermade out of 1st class hard wood with 3mm dia holes at a spacing of 10mm to 12.5mm center to centeralong the length of member for canning,suitable for existing chairs, complete all as specified and directed and shown on drg. for thefollowing type of chairs : |
| 32 | Chair Writing (Drg No. FD-261/ 280) |
| 33 | Chair Easy (Drg No. FD-229) |
| 34 | Chair dining (Drg No. FD-279/262) |
| 35 | Chair Dining (Drg No. FD/Map-II/05) |
| 36 | Removing unserviceable broken arms rest left or right ofchair and supply and fix new arms rest left or rightmade out of 1st class hard wood of existing shape and size, complete all as specified and directed and as shown on drg, for the following type of chairs : |
| 37 | Chair Writing (Drg No. FD-261/ 280) |
| 38 | Chair Easy (Drg No. FD-229) |
| 39 | Removing unserviceable broken bottom stiffener (center or side) and supply and fix newbottom stiffener (center or side) made out of 1st class hard wood, complete all as specified and directed and as shown on drg, for the following type of chairs : |
| 40 | Chair Writing (Drg No. FD-261/ 280) |
| 41 | Chair dining (Drg No. FD-279) |
| 42 | Chair Dining (Drg No. FD/Map-II/05/279) |
| 43 | Preparation of wooden surfaces new or old (of repaired chairs) by scraping with sand paper, redusting and applying putty where required and polishing the existing french/ melomine polish to get glossy finish (with one or more coats), complete all as specified and directed and as shown on drg, for the following type of chairs : |
| 44 | Chair Writing (Drg No. FD-261/ 280) |
| 45 | Chair Easy (Drg No. FD-229) |
| 46 | Chair dining (Drg No. FD-279/262) |
| 47 | Chair Dining (Drg No. FD/Map-II/05) |
| 48 | Repair of Chair Varandah (Drg No. FD-256/259/359)Removing broken/ unserviceable cane (both seat & back) and Recanning the same with best quality plastic cane 4mm wide and 0.40 mm thick of approved make after cleaning thoroughly all the surfaces of chair incl required welding work for broken frame where required and re-dustingand applying one coat of synthetic enamel paint over a coat of red oxide primer of approved shade, complete all as specified and directed. |
| 49 | Removing broken/ unserviceable cane (both seat & back) and Recanning the same with best quality plastic cane 4mm wide and 0.60 mm thick of approved make after cleaning thoroughly all the surfaces of chair incl required welding work for broken frame where required and re-dustingand applying one coat of synthetic enamel paint over a coat of red oxide primer of approved shade and providing suitable hard rubber shoes 4 Nos approved quality for eachc chair, complete all as specified and directed. |
| 50 | REPAIRS / PAINTING OF STEEL ALMIRAH & STEEL LOCKER (Drg No. FD-351/1031 & FD-243)M&L for preparation of old steel surfaces by scraping with emery paper, cleaning, re-dusting, making the surfaces smooth and apply putty where required and applying one coat of synthetic enamel paint (olive green) of insideand out sideof almirah large steelwith shelves, complete all as specified and directed. |
| 51 | All as per Srl Item No 10.00 above but Almirah medium steel with shelves ½ H x ½ S (Drg No. FD-351/1031 & FD-243/1032) |
| 52 | All as per Srl Item No 10.00 above butLocker Bed side Steel (Drg No. FD-1029) |
| 53 | Removing old unserviceable locks fromAlmirah large/Almirah medium steel/ Almirah large steel 1/2 HX1/2 S , Almirah medium 1/2 H x 1/2 S and S & F new6 lever lockwith duplicate key (2 Nos of key) of approved quality of existing size fixed with screw/ welding to shutter of almirah, complete all as specified and directed. (Drg No. FD-1031/FD-1032/FD-67/FD-114/FD-1033) |
| 54 | Removing old unserviceable lock Assembly with 6mm thick bars roundfrom Almirah large steel/Almirah medium steel /Almirah large steel 1/2HX1/2S/Almirah medium steel 1/2HX 1/2Sand supply and fix new lock assembly with 6mm round bars and lock plate with necessary fittings of approved quality, complete all as specified and directed.(Drg No. FD-1031/FD-1032/FD-67/FD-114/FD-1033) |
| 55 | Removing old unserviceable broken handles from Almirah large steel /Almirah medium steel /Almirah large steel 1/2HX1/2S/Almirah medium steel 1/2HX 1/2S and supply and fix new handle with necessary fittings of approved quality, complete all as specified and directed. (Drg No. FD-1031/FD-1032/FD-67/FD-114/FD-1033) |
| 56 | Removing the existing dentedshelvesfrom Almirah steel large/Almirah medium steel /Almirah large steel 1/2HX1/2S/Almirah medium steel 1/2HX 1/2Sbringing the item to the original shape and re-fixing the shelves with necessary cleats/nuts/bolts, complete all as specified and directed.(Drg No. FD-1031/FD-1032/FD-67/FD-114/FD-1033) |
| 57 | Removing the unserviceable shelves from Almirah large steel/Almirah medium steel /Almirah large steel 1/2HX1/2S/ Almirah medium steel 1/2HX 1/2Sand supply and fix new shelves made of 1mm thick CRCA sheet made to shape and size on drawing and fixing with cleats, nuts and bolts incl two coats of synthetic enamel paint (Olive Green) over one coat of red oxide zinc chrome primer , complete all as specified and directed. (Drg No. FD-1031/FD-1032/FD-67/ FD-114/FD-1033) |
| 58 | Removing the existing unserviceable legs from Almirah steel large /Almirah medium steel /Almirah large steel 1/2HX1/2S/Almirah medium steel 1/2HX 1/2S and supply and fixing the new legs made out of 1mm thickCRCA sheet and fixed with welding/riveting as per existing size and duly painted with two coats of synthetic enamel paint (Olive Green) over one coat of red oxide zinc chrome primer, complete all as specified and directed. (Drg No. FD-1031/FD-1032/FD-67/FD-114/FD-1033) |
| 59 | REPAIRS TO BED PLYWOOD TOP (Drg No. FD-247& FD-246) |
| 60 | M&L forremoving unserviceable / broken leg from bed plywood top and S & F new leg made out of 1st class teak woodand made to shape complete all as specified and directed |
| 61 | M&L for removing unserviceable plywood from both side of Head board of Bed plywood top andS & F new 4mm thick plywood one side teak face (Natural teak) to both side of Head board including 15mm wide 6mm thick teak wood round beading providing for both side of head board and 35mm wide 4mm thick teak wood beading for top of head board complete all as specified and directed. |
| 62 | M & L for removing unserviceable plywood from both side of Foot board of Bed plywood top and S & Fnew4mm thick plywood one side teak face (Natural teak)to both side of Foot board incl 15mm wide 6mm thick teak wood beading providing both side of Foot board and 35mm wide 4mm thick teak wood beading for top of the head board complete all as specified and directed. |
| 63 | Removing unserviceable long rail from Bed plywood top and S&Fnew long rail made out of 1st class hard wood made to shape complete all as specified and as directed. |
| 64 | Removing unserviceable center rail from Bed plywood top and S&F new cener rail made out of 1st class hard wood made to shape complete all as specified and as directed. |
| 65 | Removing old unserviceable/ worn out existing plywood topfromBed plywood top and S & Fnew12mm thick plywood BWR grade Type BB commercial 7 Ply of size 1940 X 915mm ofapproved make and fixing with minimum 18 Nos 30mm brass screw for each bed complete all as specified and as directed. Make: Kit ply/ Archid ply/ Green Ply/ Century Ply |
| 66 | Removal of old damaged long rail from bed and S&F new long rail with rounded edges of size 1980 x 75 x 50mm of hard wood shisham and fixing the same as shown on drawing including one coat of french polish after preparing the surface by sand paper, complete all as specified and directed. |
| 67 | All as per Srl Item No 18.08 above but for stiffner of size 760 x 40 x 50mm complete all as specified and directed. |
| 68 | Removing of old unserviceable head rest from bed ply top and S&F new head rest made out of 1st class hard wood shisham including provision of 6mm thick commercial plywood with 1mm thick sunmica top with both side MNF arrangement and fixing the same, including one coat of french polish, complete all as specified and directed. |
| 69 | All as per Srl Item No 18.10 above but for foot rest complete all as specified and directed. |
| 70 | REPAIR OF WOODEN TABLES:Removing unserviceable/ broken table top and S & F new table top made of 18mm thick pre-laminated particle board exterior Grade ( Natural teak finish) with 4mm thick teak wood beading all around the top, complete all as specified and directed, suitable for following type of tables : |
| 71 | Table 3\" x 2\" with drawer/ without drawer (Drg No. FD-224/283) |
| 72 | Table dining 6 persons (Drg No. FD-273/274) |
| 73 | Table office officer steal (Drg No. FD-1003) |
| 74 | Table 900 x 900 x 760mm (Drg No. FD-283) |
| 75 | Table dinning 120x90cm (4 Person) (Drg No. FD/MAP-II/03) |
| 76 | Table center (Drg No. FD-235/274/375) |
| 77 | Teapoy (Drg No. FD-237/387/278) |
| 78 | Table peg (Drg No. FD-277/384/236) |
| 79 | Table writing/ Table writing medium (Drg No. FD-275) |
| 80 | REPAIR OF SCHOOL CHAIR WITH HARD BOARD (Drg No. FD/E6/MAP/05), Make: Asisarchildam Kitlam/ Action Tesa/ Green Ply |
| 81 | Removing unserviceable seat and back from school chair and S&F PVC 4mm thick in single piece seat and back weight not less than 1.2 kgs each with adequate nos of steel screw, complete all as specified and directed and shown on drawing. |
| 82 | Removing unserviceable hand board from chair school and S&F pre-laminated particle board of exterior grade of approved shade with standard size of PVC edging all around of minimum thickness 1.6mm thick fixed with hot glue complete all as specified and and directed and shown on drawing. |
| 83 | SOFA SET CUSHION (Drg No. FD-281/ FD/Map-II/02): |
| 84 | Removing old unserviceable/ worn out cushion and tapestry cloth form sofa set 5 seater ( Set of 10 pieces) and supply of new cushion of size 21\" x 22\" x 4\"thick foam with 40 densityas approved by GE, covered with tapestry cloth of approved shade & quality over lining cloth duly covered and stiched with one side zip of size 530 to 560mm, complete all as specified and shownon drawing.Note : Cost of the tapestry cloth shall not be less than Rs. 350/- per meter. |
| 85 | Foam cushion cover only duly stiched one side zip of size 530 to 560mm as per sample approved by engineer in charge. Not : Cost of the tapestry cloth shall not be less than Rs. 300/- per meter. |
| 86 | Cleaning and preparing old polished surface of Sofa set 5 seater (3+1+1) and apply two coats of existing french/ memine polished to give a glossy finish complete all as specified and directed. |
| 87 | Repair of Chair CB Steel with Arms (Drg No. FD-75(m)): |
| 88 | M & L for removing unserviceable seat from chair CB steel with arms and S & F new seat made out of 2nd class hard wood and canned with 2mm wide and 0.3mm thick plastic cane white colour and 4mm wide 0.4mm thick plastic cane for all round the border including black polishing to the wooden frame and fixing to the same with 4 Nos GI Nut and bolts of size 3/16\"X3\" longwith two washers on either side of the seat, complete all as specified and directed . |
| 89 | M & L for removing unserviceable back from chair CB steel with arms and S & F new back made out of 2nd class hard wood and canned with 2mm wide and 0.3mm thick plastic cane white colour and 4mm wide 0.4mm thick plastic cane for all round the border including black polishing to the wooden frame and fixing to the same with 4 Nos GI Nut and bolts of size 3/16\"X3\" long with two washers on either side of the seat, complete all as specified and directed. |
| 90 | M & L for removing unserviceable/broken arms from chair CB steel with arms and S & F new arms made out of first class teak wood andhandle shall be black polished and fixed to the chairs CB steel with arms with suitable wooden screws, complete all as specified and directed. |
| 91 | M & L for preparation of steel surfaces by emery paper to Chair CB steel with arms and applying one coat of synthetic enamel paint olive green shade approved quality over a coat of red oxide primer, complete all as specified and directed. |
| 92 | REPAIRS / PAINTING OF Bed hard (Drg No. FD/E6/MAP/08): |
| 93 | Preparation of old steel surfaces by scraping with emery paper, cleaning, re-dusting, making the surfaces smooth and apply putty where required and applying one coat of synthetic enamel paint (black paint) of bed hard hard topincluding welding wherever necessary, complete all as specified and directed. |
| 94 | Removing old unserviceable/ worn out existing plywood topfrombed hard top and S & Fnew12mm thick plywood BWR grade Type BB commercial 7 Ply of size 1974x930mm ofapproved make and fixing with minimum 12Nos of 8x30mm screw for each bed, complete all as specified and directed. Make: Kitply/ Archid ply/ Green ply/ century ply |
| 95 | REPAIR OF CHARPOY GI PIPE 32MM WITH NYLON NEWAR : (Drg No. FD-220): |
| 96 | M&L for removing the threadless/broken long rails from charpoy GI Pipe 32 mm and supply and fix new long rails of 32 mm dia GI Pipe medium grade 1.88 mtr long threaded at both ends and fix to existing three wayelbow 32 mm dia complete all as specified and directed and shown on drg. |
| 97 | Taking out existing old broken short rail from Charpoy GI 32mm dia and providing in positionshort rails madeout of old broken long rail obtained from taking down above itemincluding threading on both ends complete all as specified and directed and shown on drg. |
| 98 | Taking out existing old broken short rail from Charpoy GI pipe and S&F new short rails made out of 32mm dia GIPipe medium grade 900mm duly threaded at both ends and fixed to existing three way elbow complete all as specified and directed and shown on drg. |
| 99 | Taking out existing old broken legs from Charpoy GI 32mm dia and providing innew legs in position madeout of old broken short rails obtained from taking down above itemand S&F 3mm thick 40mm dia MS plate weldedat bottom of leg including threading on top portionand fixed complete all as specified and directed |
| 100 | Taking out existing old broken legs from Charpoy GI pipe and S&F new legs made out of 32mm dia GI pipe med grade incl 3mm thick 40mm dia MS plate welded at bottom of leg and threading on top and fixed complete all as specified and directed. |
| 101 | M&L for removing unserviceable three wayelbow 32 mm diaand S & F new three way elbow 32 mm diamedium grade (ISI marked) complete all as specified and directed and shown on drg. |
| 102 | M&L for removing unserviceable check nuts of 32 mm dia andS & F new check nuts 32mm dia 6mm thick of best quality complete all as specified and directed and shown on drg. |
| 103 | M&L for removing the old unserviceable Nylon Newar from charpoy GI Pipe 32 mm dia andSupply reweaving with light shade new nylon newar 50 to 55mm wide closely double knittedand complete all as specified and directed by Engr -in- Charge.(Weight of nylon newar shall not be less than 1.75 Kgs per charpoy and colour shell be white/ light colour), complete all as specified and directed.Make: of nylon newar shall be Konark/ Mayur |
| 104 | S&F 1950x900x12mm thick BWR grade, type BB, commercial plywood, 7 ply conforming to IS 303 of 1975 with 4mm thick teak wood beading all around the ply wood edges and fixing ply wood with suitable size of counter sunk bolts,nuts with washer, complete all as specified and directed.Make: Kitply/ Archid ply/ Green ply/ century ply |
| 105 | REPAIRS / PAINTING OF Charpoy IP Hard top (Drg No. FD/Map-II/01) : |
| 106 | M&L for preparation of old steel surfaces by scraping with emery paper, cleaning, re-dusting, making the surfaces smooth and apply putty where required and applying one coat of synthetic enamel paint (black paint) of Charpoy IP hard topincluding welding wherever necessary complete all as specified and directed. |
| 107 | Removing old unserviceable/ worn out existing plywood topfromCharpoy IP hard top and S & Fnew12mm thick plywood BWR grade Type BB commercial 7 Ply of size 1930x850mm ofapproved make and fixing with minimum 12Nos of 8x30mm screw for each bed complete all as specified and directed. Make: Kitply/ Archid ply/ Green ply/ century ply |
| 108 | M&L for repair ofexisting old broken leg of Charpoy IP with 3mm thick MS sheet welded wherever required complete all as specified is to be done as directed by Engr-in Charge and shown on drawing. |
| 109 | Conversion of Charpoy GI Pipe with Nylon Newar to Charpoy GI pipe with Ply wood top (Drg No. FD-220): |
| 110 | M&L for removing the existing nylon newar from charpoy GI pipe and welding four mild steel square tubes 25mmx 25 mm x 16 gauge, 225 mm long on short rails at four corner of Charpoy GI pipe incl drilling holes for fixing plywood with suitable size of counter sunk bolts and nuts and painting steel surfaces of square tubes with two coats of black synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed. |
| 111 | M&L for 2 Nos mild steel square tube 25mm x 25 mm x 16 gauge, 850 mm long welded on long rails horizontally at equal distance incl drilling 04 Nos holes at equal distance forfixing plywood with counter sunk bolts and nuts and painting steel surfaces of square tubes with two coats of black synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed. |
| 112 | S&F 1950 mm x 900 mm x 12mm thick BWR grade, type BB,commercial plywood,7 ply conforming to IS 303 of 1975 with 4 mm thick teak wood beading all around the ply wood edges and fixing ply wood with suitable size of counter sunk bolts,nuts with washer complete all as specified and directed. Make: Kitply/ Archid ply/ Green ply/ century ply |
| 113 | Provision of new clamps for made out of 25 x 3mm mild steel flat iron welded with gi legs of charpoy GI pipe duly painted with black paint all shown on drawing, complete all as specified and directed. (FD-221) |
| 114 | TEAPOY (Drg No. FD-232/278) M & L for carrying out repair/replacement of following parts of Teapoyas per drawing after dismantling the old parts, complete all as specifiedand directed for following:- |
| 115 | S&F legs of Teak wood . |
| 116 | S&F long rails of Teak wood. |
| 117 | S&F short rails. |
| 118 | S&F top of 18/19mm thick prelaminatedparticle board ISI Marked standaredexterior gradeand 6mm thick Teak edging allaround. |
| 119 | S&F stiffners of Teak wood. |
| 120 | Applying two coats of french polish/ melomine polish to Teapoy after necessary preparation of surfaces. |
| 121 | PEG TABLE (Drg No. FD-277/384) M&L for carrying out repair/ replacement of following parts of Peg Table as per drawing after dismantling the old parts complete all as specified and directed for following:- |
| 122 | S&F the legs of Teak wood. |
| 123 | S&F long railsof Teak wood. |
| 124 | S&F shortrailsof Teak wood. |
| 125 | S&F top of 18/19 mm thick prelaminated particle board ISI Marked standared,exterior grade and 6mm thick Teak edging alround. |
| 126 | Applying two coats of french polish/ Melomine polish to complete peg table afternecessary preparation of surfaces. |
| 127 | HAT STAND WITH MIRROR (Drg No. FD-233) M&L for carrying out repair/replacement of following parts of Hat Stand with mirorras per drawing after dismantling the old parts, complete all as specified and directed for following:- |
| 128 | S&F mirror shall be 55mm thick standard quality ATUL/Sanit Gobain duly electro copper plated on back shall be provided on the Black board. |
| 129 | S&F brass cap stand hooks to be provided. |
| 130 | All exposed surfaces shall be french polished. |
| 131 | TABLE OFFICE CLERKWOODEN (Drg No. FD-84/1004)M&L for carrying out repair/replacement of following parts of Table office Clerk wooden as per drawing after dismantling the old parts, complete all as specified and directed. |
| 132 | S & F Top suitable for table made out of 18mm thick prelaminated particle board exterior grade, phenyl formoldehyde bonded, flat pressed three layer BWR type-II,fixed with mild steel screws as per size and shape including 4mm thick teak wood beading all around. Make : Action Tesa/ Arched/ Novapan |
| 133 | S&F drawer made of first class hard wood (teak) as per drg |
| 134 | Cleaning and preparingold polished surface of table office clk wooden and apply two coats of french/ melomine polishing to give a glossy finish, complete all as specified and as directed. |
| 135 | TABLE CENTRE/ TABLE CENTRE TWO TIER (Drg No. FD-274) M & L for carrying out repair/replacementfollowing parts to table centre,complete all as specified and shown on drgs after removing the old broken part. |
| 136 | Top 900x450mm made out of 18mm thick prelaminated particle board exterior grade, phenyl formoldehyde bonded, flat pressed three layer BWR type-II, Make : action tesa/arched/novapanISI marked fixed with mild steel screws as per size and shape including4mm thick teak wood beading all around. |
| 137 | S&F Legsmade out of first class hard wood (Teak) |
| 138 | S&F Long railsmade out of first class hard wood (Teak) |
| 139 | S&F Short railsmade out of first class hard wood (Teak) |
| 140 | S&F Stiffners of 2 tier tablemade out of first class hard wood (Teak) |
| 141 | Cleaning and preparingold polished surface of table centre and apply two coats of french/ melomine polishing to give a glossy finish complete all asspecified and as directed. |
| 142 | TABLE WRITING (Drg No. FD-275)M&L for carrying out repair/replacement of following parts of Table writing as per drawing after dismantling the old parts, complete all as specified and directed for following:- |
| 143 | Top of the table with 18/19mm thick prelaminated particle board ISI Markedstandaredmake (action tesa/arched/novapan)as in top of the table including 6mm thick Teak beading all around. |
| 144 | Legs of Teak wood, |
| 145 | Long rails of Teak wood. |
| 146 | Drawer complete as suitable for table |
| 147 | Shutters and drawers of 18/19mm prelaminatedparticle board exterior grade,fixed with 2 Nos Hinges medium weight 75 mm with locking arrangements and handles all as shown in Drg. |
| 148 | Applying two coats of existing french/ melomine polish after preparation of surfaces. |
| 149 | REPAIR OF DRESSING MIRROR GENTS/ LADIES(Drg No. - FD/MAP-II/16 FD/MAP-II/07): |
| 150 | Removing unserviceable/ broken Mirror from dressing mirror gents and S&F the glass 5 to 5.5mm thick well-polished, uniformly silver plated with red led paint in the back, free from silvering defects complete all as specified and directed. |
| 151 | Removing unserviceable glass shelves from dressing mirror gents and S&F glass shelved in dressing mirror Gents of approx size 580mm long x 90mm wide x 5mm thick of approved quality complete all as specified and directed. |
| 152 | Polishing of dressing mirror gents with french polish for obtaining glossy finish incl preparation of wooden surfaces by scrapping with sand aper and apply putty where ever reqired complete all as specified and directed. |
| 153 | REPAIR OF DOUBLE BED BUNK STEEL (TP) (WORK IS TO BE DONE AT USER LOCATION RMS CHAIL) |
| 154 | S&F 12mm thick plywood BWR grade type BB sizeof 1950mm x 900mm approved make and fixing it by min 16 Nos of 35mm nuts & bolts with washer complete for each bunker bed, complete all as specified and directed.Make: Kitply/ Archid ply/ Green ply/ century ply |
| 155 | M&L for repair of existing old broken leg of bunker bed with 3mm thick of MS sheet welded wherever required, complete all as specified and directed. |
| 156 | M&L for repair to existing wire mesh (jali) of bunker bed of size 1880mm x 914mm, 4mm thickness incl welding wherever required at joints upto 10 joints, complete all as specified and directed. |
| 157 | M&L for removing unsv/ worn out mild steel square tube and S&F new mild steel square tube 19mm x 19mm x 16 gauge, 915mm long of approved make welded on long rails horizentally at equal distance incl drilling 02 holes at equal distance for fixing plywood and painting steel surfaces of tubes with two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer wherever required, complete all as specified and directed.Make: Kitply/ Archid ply/ Green ply/ century ply |
| 158 | Repair To Chair Writing(MAP) [FD/E6/MAP/12] & Chair Visitor Cushioned with arms [FD/E6/MAP/12] & TP/ Godrej/ Ornate |
| 159 | Removing old unserviceable worn out cushions from seat and back of chair wrinting (MAP) and supply & fixing new PU cushions of50mm thick of 40 density of existing size and shape, complete all as shown on drawing, specified and directed. |
| 160 | Removing old unserviceable worn out leathrite cover/ tapestry cover from cost not less than 350/- per mtr seat and back of chair wrinting (MAP) and supply & fixing leathrite cover of approved colour of existing shape and quality including PVC lipping all around, complete all as shown on drawing, specified and directed. |
| 161 | Removing old unserviceable broken frame of the chair writing/Visitor and Supply & fixing new the frame of the chair shall be of MS tubular frame powder coated, cantilever type of size 25mmx10mm in section with 8 x 3mm MS Flat Iron of existing size and quality, complete all as shown on drawing, specified and directed. |
| 162 | Removing old unserviceable worn out old seat ply from chair wrinting/ Visitor (MAP) and supply & fixing new seat made of 12 mm thickhot press plywood in proper size and shape complete all as shown on drawing, specified and directed. |
| 163 | Removing old unserviceable worn out old arms rest from chair wrinting (Map) /Visitor and S&F new arm rest in one piece made of black integral skin polyurethane in proper size and shape complete all as shown on drawing, specified and as directed. |
| 164 | Removing old unserviceable worn out old rubber stoper (shoe) from chair wrinting (Map)/Visitor and supply & fixing new PVC stopper in white colour in superior quality in proper size and shape complete all as shown on drawing, specified and directed. |
| 165 | M&L for spot welding of broken joint 25mm to 75mm long and and applying a coat of synthetic enamel paint over a coat of red oxide primer after preparation of welded suface complete all as specified and shown on drawing and directed. |
| 166 | Steel portion of chair shall be painted with a coats of synthetic enamel paint of black colour over a coat of primer whereever required complete all as specified and directed. |
| 167 | Repair To Chair Computer,[TP/ Godrej]/ Chair revolving Off sizes, Cost Rs. 350/- Per Mtr |
| 168 | Removing old unserviceable worn outtapestry cloth from seat and back of chair computer pattern and supply & fixingleathrite cover of approved colour of existing shape and quality including whereever required PVC lipping all around, complete all as specified and directed. |
| 169 | Removing old unserviceable worn out cushions from seat and back of chair computer of and supply & fixing new PU cushions of 75 mm thick of 40 density of existing size and shape, complete all asspecified and directed. Make of Cushion: Sleepwell/ Kurlon/ Duro |
| 170 | Removing old unserviceable worn out ply from seat and back of each chair computer of trade pattern and S&F new ply 12mm thick hot press plywood of existing size and shape, complete all as specified and directed. |
| 171 | Removing old unserviceable broken caster wheels from chair computer and S&F new caster wheels of existing size and shape, complete all as specified and directed. |
| 172 | Removing old unserviceable broken tiltingbolts from chair computer and S&F new tilting bolts of existing size and shape in best quality, complete all as specified and directed. |
| 173 | Removing old unserviceable handle from chair computer and S&F new handle including required nut and bolts of existing size and shape in best quality, complete all as specified and directed. |
| 174 | Removing old unserviceable hydraulic fom chair computer and S&F new hydraulic of existing shape and size, complete all as specified and directed. Make: Godrej/ Geeken |
| 175 | Removing old unserviceable/ broken base of chair computer and S&F new base including complete assemblyand caster wheels of existing size and shape in best quality, complete all as specified and directed. |
| 176 | Chair Dining With Cushion FD/MAP-II/04Dismantling/ taking out carefully existing broken parts of table dining and supply & fixing new parts fixed in replacement all as shown in drg, preparing and french/ melamine polishing new parts to match the existing shade, complete all as specified and directedas follows :- |
| 177 | Teak wood Rear leg |
| 178 | Teak wood Front leg |
| 179 | Teak wood Rail (Front / Side/ Rear) |
| 180 | Teak wood Stiffener (Side/ Center) |
| 181 | PVC Rubber Shoes of best quality |
| 182 | Seat ply made of 12 mm ply wood commercial BWR type. |
| 183 | Seat Cushion made of 75 mm thick, 40 density complete all specified, directed and all as shown on drawing. |
| 184 | Seat tapestry cloth of worth not less than Rs. 350/- per meter of quality and shade of sample approved by GE incluing back side markeen clothcomplete all specified, directed and all as shown on drawing. |
| 185 | REPAIR TO TABLE COMPUTER (MAP) Drg No. FD/E6/MAP/03Dismantling/ taking out carefully existing broken parts of table computer and supply & fixing new parts fixed in replacement all as shown in drg, preparing and polishing new parts to match the existing shade complete all as specified and directedas follows :- |
| 186 | Top of table computer made out of 18mm thick prelaminated MDF board, bothside laminated exterior grade, grade I with 2mm thick PVC beading alround complete all as specified and directed. |
| 187 | Shelves, bottom shelves of table computer made out of 18mm thick prelaminated MDF board, both side laminated exterior grade, grade I with 2mm thick PVC beading alround complete all as specified and directed |
| 188 | Key board of table computer made out of 18mm thick prelaminated MDF board, both side laminated exterior grade grade I with 2mm thick PVC beading alround complete all as specified and directed |
| 189 | Drawer of table computer made out of 18mm thick prelaminated MDF board, bothside laminated exterior grade grade I with 2mm thick PVC beading alround complete all as specified and directed |
| 190 | Taking out old unserviceable channel from table computer and Supply and fixing new channel of existing size in approvedquality complete all as specified and directed. |
| 191 | Taking out old unserviceable Knob/ handle from table computer and Supply and fixing new brass Knob/ handle of existing size in best quality complete all as specified and directed. |
| 192 | Repair To Table Bed Side (MAP) [FD/E6/MAP/15]Dismantling/ taking out carefully existing broken parts of Table bed side Map and supply & fixing new parts fixed in replacement all as shown in drg, preparing and polishing new parts to match the existing shadecomplete all as specified and directedas follows :- |
| 193 | Top of Table Bed side (MAP) made out of 18mm thick prelaminated MDF board, both side teak face laminated exterior grade with 6mm thick teak wood beading alround. |
| 194 | Side made out of 18mm thick prelaminated MDF board, both side teak face laminated exterior grade with 6mm thick teak wood beading alround. |
| 195 | Upper drawer (front side) made out of 18 mm thick prelaminated MDF board, both side teak face laminated exterior grade with 6mm thick teak wood beading alround including D type SS handle. |
| 196 | Complete bottom drawer made out of 18mm thick prelaminated MDF board, both side teak face laminated exterior grade with 6mm thick teak wood beading alround including D type SS handle. |
| 197 | Bottom of drawer made out of 6mm thick commercial BWR plywood including duly primer. |
| 198 | Back made out of 6mm thick commercial ply BWR type, made to shape, duly primer. |
| 199 | Handle 75mm long \"D\" Type Stainless steel |
| 200 | Note: The scope of work included is to be carried out at furniture store yard or user locations (Chail, Kelvin Grove, 22 JAK Rif unit area, HQ Artrac and Kalka) respectively. |
