}

Tender For Supply Of Material For Electrical Installations, narela-Delhi

Municipal Corporation Of Delhi has published Tender For Supply Of Material For Electrical Installations. Submission Date for this Tender is 15-07-2025. Construction Material Tenders in narela Delhi. Bidders can get complete Tender details and download the document.




Tender Notice

50060539
Tender For Supply Of Material For Electrical Installations
Tender
Indian
Delhi
Narela
15-07-2025

Tender Documents

Tender Details

Supply Of Material For Electrical Installations Supply Of Material For Day To Day Maintenance Of Electrical Installations In Zonal Office Building Narela Under Narlela Zone , Supply Of 1.5 Sq. Mm Isi Marked, Frls Pvc Insulated,Single Core Copper Conductor Cable , Supply Of 2.5 Sq. Mm Isi Marked, Frls Pvc Insulated,Single Core Copper Conductor Cable , Supply Of 4.0 Sq. Mm Isi Marked, Frls Pvc Insulated, Single Core Copper Conductor Cable , Supply Of 10 Sq. Mm Isi Marked, Frls Pvc Insulated,Single Core Copper Conductor Cable , Supply Of S.P. 5/6 Amps, One Way Switch, Piano Type Isi Marked , Supply Of 3 Pin 5/6 Amps Socket Outlet, Piano Type Isi Marked , Supply Of S.P. 15/16 Amps, One Way Switch, Piano Type Isi Marked , Supply Of 6 Pin 15/16 & 5/6 Amps Socket Outlet, Piano Type Isi Marked , Supply Of 3 Mm Thick Phenolic Laminated Sheet , Supply Of Bell Push, Piano Type , Supply Of Call Bell/ Buzzer, Single Phase , Supply Of Stepped Type Modular Fan Regulator (2 Module) , Supply Of 32 Amps. Ratings , Sp Mcb, “C” Curve,10 Ka Breaking Capacity , Supply Of 32 Amps. Ratings , Dp Mcb, “C” Curve, 10 Ka Breaking Capacity , Supply Of 2 Pole 40 Amp Isolator , Supplying Of Led Surface Mounted Batten Light Of Following Body Material And Construction As Per Is : 10322 With Driver (Replaceable) As Per The Requirement With Driver Efficiency >85% ,Operating Voltage Ac 140-270 Volt, Freq 50/60 Hz, Operating Temp Range -15 Deg To 40 Deg Centigrade, Internal Surge Protection Of 2.5 Kv With Short & Open Circuit Protection ,Thd < 10% , P. F.=0.95, Ip20, Cri >80, Flicker Free, (Flicker Should Be Below 5 %), Life Time (Led,Driver & Electrical Circuitary), Of Minimum 50000 Burning Hours With , 70% Of Initial Lumen Maintained Till Life Ends, Cct 3000°K / 4000°K / 5700°K /6000°K/6500°K (As Per Ansi Bin), Sdcm(Standard Deviation Color Matching) <3, Maximum Power Consumption Should Not More Than The Specified Rating And Fixture Shall Be Of Relevant Bis Standard And Trade Mark Certificate ( T.C.). Manufactures Word Mark/ Name Engraved/ Embossing/ Screen Printing On Housing. Complete In All Respect I/C Connections With 1.5 Sq Mm Frls, Pvc Insulated Copper Conductor Single Core Cable And Earthing Etc. As Required With Minimum 5 Year Oem Warranty. System Lumen Efficacy =105 <120 Lm/Watt Output . Lm79 & Lm80 Test Report From Nabl Lab For All Testing Required For Led Fixtures As Per Bis Shall Be Submitted. Shape Size And Cctshall Be As Approved By Engineer-In-Charge As Per Requirement.(Thermal Management: Heat Sink Of Aluminium Housing Such That Led Junction Temperature Shall Not Rise Above 90°C). Powder Coated Die Cast /Extruded Aluminium Body (Thickness > 1.20 Mm) (A) 18-22 Watt , Supplying Of Flood Light, Powder Coated Pressure Die Cast Aluminium Body With Built In Or Separate Driver As Per The Requirement With Driver Efficiency >85%, Input Voltage: Input Voltage: 140-270 Volt Ac, Freq 50/60 Hz, Operating Temp Range -15 Deg To 50 Deg Centigrade, Internal Surge Protection Of 5 Kv L,N,E As Per Iec 61000-4-5, Driver Efficiency >85%,Thd< 10% As Per Iec 61000-3-2 , P. F.=0.95, Ip-66,Ik-10, Cri >80 , Under Voltage And Over Voltage Protection,Emi-Emc As Per Cispr-15, Lenses For Beam Angle 30 Deg-120Deg As Per The Application And The Project Requirementdeg., Suitable Tilt Able Fitting, Life Time (Led,Driver & Electrical Circuitary) Of Minimum 50000 Burning Hours With 70% Of Initial Lumen Maintained Till Life Ends As Per Lm80 Extrapolation Ies Tm-21-11 Report , Cct 3000°K / 4000°K / 5700°K /6000°K/6500°K (As Per Ansi Bin) , Sdcm(Standard Deviation Color Matching) <5, Maximum Power Consumption Should Not More Than The Specified Rating And Fixture Shall Be Of Relevant Bis Standard Complete In All Respect I/C Connections With 1.5 Sq Mm Frls, Pvc Insulated Copper Conductor Single Core Cable And Earthing Etc. As Required With Minimum 5 Year Oem Warranty. System Lumen Efficacy >135 Lm/Watt Output . Lm79 & Lm80 Test Report From Nabl Lab For All Testing Required For Led Fixtures As Per Bis Shall Be Submitted. Shape Size And Cct Shall Be As Approved By Engineer-In-Charge As Per Requirement. (Thermal Management: Heat Sink Of Aluminium Housing Such That Led Junction Temperature Shall Not Rise Above 90°C). (A) 150 Watt , Supply Of 8 Way, Spn, Double Door, Mcb Db , Supply Of 12 Way, Spn, Double Door, Mcb Db , Supply Of 4 Pole Mccb, 250A, 50Ka , Supply Of 4 Pole Mccb, 400A, 50Ka , Supply Of Brass Batten/ Angle Holder , Supply Of Xlpe Insulated Pvc Sheathed Al. Conductor Armoured Cable 1.1 Kv Grade Conforming To Is-7098 Of 2 Core 16 Sqmm , Supply Of Xlpe Insulated Pvc Sheathed Al. Conductor Un-Armoured Cable 1.1 Kv Grade Conforming To Is-7098 Of 4 Core 25 Sqmm , Supply Of Xlpe Insulated Pvc Sheathed Al. Conductor Armoured Cable 1.1Kv Grade Conforming To Is-7098 Of Following Size:-3.5C*50 Sqmm , Suuply Of Following Size Of Pvc Insulated & Pvc Sheathed Copper Conductor 3 Core Submersible Cable Confirming To Is.694/210 Etc As Required.3X2.5 Sqmm With Voltage Grade 1100 Volts , Supplying, Lowering, Testing And Commissioning Of Vertical Type, Multistage, Totally Enclosed Water Filled Deep Well Submersible Pumping Set Complete I/C Connection Etc. As Reqd.(B)Single Phase 3.0 Hp Having Discharge Of 100 Lpm Approx. At 52 M Head , Supply Of 250 Mm (10 Inch) Sweep 1250 Rpm Exhaust Fan Fresh Air Type Complete With Shutter Blades Etc. As Required. , Rewinding Of Ac Ceiling Fan Of All Sizes Andmake Including Oiling, Greasing As Required New Model (Light Weight) , Replacement Of Fan Condenser 2.5 Mfd As Required. , Supply,Installation, Testing & Commissioning Of Portable Type Co2 Fire Extinguisher Of 4.5 Kgs Capacity Completely Charged Complete With Release Valve, Discharge Horn/Pipe Locking Arrangement, Wall Mounted Bracket With Screw And Sleeve Confirming To Relevant Is. , P&F 4 Kg Capacity Dry Powder Abc Type (Stored Pressure) Completely Charged Fire Extinguisher Complete With Pressure Gauge, Release Valve, Discharge Horn/Pipe Locking Arrangement, Wall Mounted Bracket With Screw And Sleeve Confirming To Relevant Is.

Key Value

Document Fees
INR 590 /-
EMD
INR 9650.0 /-
Tender Value
INR 4.58 Lakhs /-

Attachment

FileName File Description File Size
Click here to download tender document Tender Documents 0 KB
Click here to download tender document Tender Documents 0 KB
Click here to download tender document Tender Documents 0 KB
Click here to download tender document Tender Documents 0 KB
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail