Supply Of Furniture For Library Computer Lab At Maharshi Dyanand University, Rohtak , Computer Lab Workstation :900W X 600D X 1200H With Metal Keyboard Tray Providing And Placing Partition Based Modular Workstation With System Ht 1200 Mm With Partition Thickness 52.4 Mm Thk As Main Spine Including Powder Coated Aluminium Trims And 22.8Mm Thick Fin Panels At The Ends Formed Out Of Blocks Which Are 18 Mm Thk Plb Boards Wrapped With Laminate At Intermediate Level. Top Block Should Be In Fabric Finish, Intermediate Blocks In Prelam And Bottom Block Is Plain Metal Powder Coated Finish As Per The Layout. The Product Shall Be Greenguard Ul, Green Pro Cii, Indoor Advantage Gold, Griha & Bifma Level 2 Certified. The Certificate Mentioned In The Specification Must Be Issued By An Authorized Certificate Issuer And Must Mention Product Name Along With Manufacturer Name.Partition Construction - A Block Of 52.4Mm Thick Panel Comprises Of 38Mm Thick Paper Honeycomb + 3Mm Mdf On Each Sides + .6Mm Decorative Laminate Or Fabric On Both Sides. The Panels Are Elevated From Ground By 120Mm With Legs. Each Panel Consists Of Vertical Extrusions And Horizontal Extrusions Trims Made Of 1.2Mm Thick Aluminium With Duly Powder Coated At Every Division Of Tile/Block. Particle Board Framing Is Used On Outer Boundary Of The Blocks As Well As Intermedicately At Locations Forming Conduit For Passing Cables. Fabricated Bottom Frame Comprises Of L-Channels Made Of 2Mm Thick Crca Steel (Is:513), Formed Plates Of 3Mm Thock Hr Steel (Is:2062) & Erw Steel Tube Of Size 35X15x1.6Mm Thick In Oval Cross Section (Is:7138) Welded Together. This Frame Is Bolted To The Uprights With M6 Screws.Worksurface - Size 900Mm/1050Mm (W) X 600Mm (D) Shall Be Made Out Of 25 Mm Thk Prelam Particle Board Is-12823 Grade With Flat Pvc Lipping Edge Banding As Per Above Qty.Tiles - Top Tile Shall Have The Combination Of Fabric Tiles Made Of .6Mm Thick Mdf Panles Wrapped With Fabric. Bottom Tile Shall Be Plain Metal Powder Coated And Intermediate Blocks In Laminate Finish.Wire Management Through Main Spine Shall Be Taken Into The System Through Cable Ducts From The Junction Boxes And It Is Carried Upto The Panels Through Concealed Conduits Inside The Blocks. Only Provisioning Of Wires/Switches Etc Shall Be Given. All The Electrical Wires/Switches/Data/Accessories Etc. Shall Not Be Part Of Furniture Supply. Metal Keyboard Tray Should Be Provided. Complete In All Respect To Entire Satisfaction Of Engineer-In-Charge. , Computer Lab Workstation :1050W X 600D X 1200H With Metal Keyboard Tray Providing And Placing Partition Based Modular Workstation With System Ht 1200 Mm With Partition Thickness 52.4 Mm Thk As Main Spine Including Powder Coated Aluminium Trims And 22.8Mm Thick Fin Panels At The Ends Formed Out Of Blocks Which Are 18 Mm Thk Plb Boards Wrapped With Laminate At Intermediate Level. Top Block Should Be In Fabric Finish, Intermediate Blocks In Prelam And Bottom Block Is Plain Metal Powder Coated Finish As Per The Layout. The Product Shall Be Greenguard Ul, Green Pro Cii, Indoor Advantage Gold, Griha & Bifma Level 2 Certified. The Certificate Mentioned In The Specification Must Be Issued By An Authorized Certificate Issuer And Must Mention Product Name Along With Manufacturer Name.Partition Construction - A Block Of 52.4Mm Thick Panel Comprises Of 38Mm Thick Paper Honeycomb + 3Mm Mdf On Each Sides + .6Mm Decorative Laminate Or Fabric On Both Sides. The Panels Are Elevated From Ground By 120Mm With Legs. Each Panel Consists Of Vertical Extrusions And Horizontal Extrusions Trims Made Of 1.2Mm Thick Aluminium With Duly Powder Coated At Every Division Of Tile/Block. Particle Board Framing Is Used On Outer Boundary Of The Blocks As Well As Intermedicately At Locations Forming Conduit For Passing Cables. Fabricated Bottom Frame Comprises Of L-Channels Made Of 2Mm Thick Crca Steel (Is:513), Formed Plates Of 3Mm Thock Hr Steel (Is:2062) & Erw Steel Tube Of Size 35X15x1.6Mm Thick In Oval Cross Section (Is:7138) Welded Together. This Frame Is Bolted To The Uprights With M6 Screws.Worksurface - Size 900Mm/1050Mm (W) X 600Mm (D) Shall Be Made Out Of 25 Mm Thk Prelam Particle Board Is-12823 Grade With Flat Pvc Lipping Edge Banding As Per Above Qty.Tiles - Top Tile Shall Have The Combination Of Fabric Tiles Made Of .6Mm Thick Mdf Panles Wrapped With Fabric. Bottom Tile Shall Be Plain Metal Powder Coated And Intermediate Blocks In Laminate Finish.Wire Management Through Main Spine Shall Be Taken Into The System Through Cable Ducts From The Junction Boxes And It Is Carried Upto The Panels Through Concealed Conduits Inside The Blocks. Only Provisioning Of Wires/Switches Etc Shall Be Given. All The Electrical Wires/Switches/Data/Accessories Etc. Shall Not Be Part Of Furniture Supply. Metal Keyboard Tray Should Be Providedcomplete In All Respect To Entire Satisfaction Of Engineer-In-Charge. , Computer Lab Chair With Castors Without Arm Providing And Placing Computer Chair Where The Seat Sub-Assembly Shall Be Made Up Of 1.2+/-0.1Cm Thk Plywood Upholstered With Moulded Foam And Polyster Fabric And Shall Be Covered With An Injection Moulded Polypropylene Outer Cover. The Product Shall Be Greenguard Gold Ul, Green Pro Cii, Indoor Advantage Gold & Griha Certified. The Certificate Mentioned In The Specification Must Be Issued By An Authorized Certificate Issuer And Must Mention Product Name Along With Manufacturer Name. The Seat Should Tip-Up When Not In Use And This Feature Should Be Used While Stacking The Chairs Horizontally. The Back Sub-Assembly Shall Be Made Up Of Injeection -Moulded Polypropylene Inner Upholstered With Moulded Foam And Polyster Fabric And Shall Be Covered With An Injection Moulded Polypropylene Outer Cover. The Countoured Back With Width Extension At The Bottom Area Shall Be Designed To Give Comfort To Lower Back. The Back Flexing Feature Shall Allows The Back To Tilt By 9+/-2 Degree To Aid The User In Adopting A Comfortable Reclining Posture. The Dimensions Of Back Shall Be 45.2Cm(W) X 44.6Cm(H). And Of Seat Shall Be 47.0Cm (W) X 50.0Cm(D). The Powder Coated 4 Leg Structure Shall Be Made Of 2.2+/-0.03Cm Dia X 0.25+/-0.02Cm Thk M.S.E.R.W. Tube Front And Rear Leg Shall Be Welded Along With Connecting Tube Made Of 1.9+/-0.02Cm Dia X 0.2+/-0.016Cm Thk M.S.E.R.W Tube To Form The Tubular Frame Assembly. The Legs Shall Be Provided With Injection Moulded Adopter Bush In Black Nylon And Brake-Loaded Castors Enabling Easy Maneuvering While Not In Use And Stable Siting While In Use. The Chairs Should Be Stacked Horizontally When Not In Use. The Polyurethane Foam Shall Be Moulded With Density= 70.0+/-8.0Kg/M3 And Hardness=20+/-2 For Seat And 16+/-2 For Back At 25% Compression. The Twin Wheel Castors Shall Be Injection Moulded In Black. Overall Dimensions Of Chair Shall Be Seat Height - 47.5 Cm, Height - 89.0Cm, Width & Depth Of Chair As Measured From Pedestal - Width-64.4Cm And Depth-64.5 Cm.Complete In All Respect To Entire Satisfaction Of Engineer-In-Charge. , Staff Cubicle Workstation System Providing And Placing Partition Based Workstation Cubicle With Partition Ht 1200 Mm With Partition Thickness 52.4 Mm Thk As Main Spine Including Powder Coated Aluminium Trims. The Product Shall Be Greenguard Ul, Green Pro Cii, Indoor Advantage Gold, Griha & Bifma Level 2 Certified. The Certificate Mentioned In The Specification Must Be Issued By An Authorized Certificate Issuer And Must Mention Product Name Along With Manufacturer Name.Partition Construction - A Block Of 52.4Mm Thick Panel Comprises Of 38Mm Thick Paper Honeycomb + 3Mm Mdf On Each Sides + .6Mm Decorative Laminate Or Fabric On Both Sides. The Panels Are Elevated From Ground By 120Mm With Legs. Each Panel Consists Of Vertical Extrusions And Horizontal Extrusions Trims Made Of 1.2Mm Thick Aluminium With Duly Powder Coated At Every Division Of Tile/Block. Particle Board Framing Is Used On Outer Boundary Of The Blocks As Well As Intermedicately At Locations Forming Conduit For Passing Cables. Fabricated Bottom Frame Comprises Of L-Channels Made Of 2Mm Thick Crca Steel (Is:513), Formed Plates Of 3Mm Thock Hr Steel (Is:2062) & Erw Steel Tube Size 35X15x 1.6Mm Thick In Oval Cross Section (Is:7138) Welded Together. This Frame Is Bolted To Uprights With M6 Screws.Tiles - Top Tile Shall Have The Combination Of Fabric Tiles Made Of .6Mm Thick Mdf Panles Wrapped With Fabric. Bottom Tile Shall Be Plain Metal Powder Coated And Intermediate Blocks In Laminate Finish. Modesty Panel - 25Mm Thick Plb Modesty Has Been Given On The Front Of The Main Worktop Which Is Attached To The Partition On One End With Gable End Bkts And With Metal Powder Coated Frontier Leg On The Other End.Worksurface - Main Table Shall Be Made Out Of 25 Mm Thk Prelam Particle Board With Flat Pvc Lipping Edge Banding Of Size 1500 Mm (W) X 600 Mm (D) And Eru Table Recta Of Size 900 Mm W X 450 Mm D.Pedestal With Flat Metal Front, Full Ht Free Standing Central Locking Of Size 390 Mm W X 435 Mm D X 646 Mm Ht 3Dr = 2Box+1File Shall Be Provided.Wire Management Through Main Spine : Wires Shall Be Taken Into The System Through Cable Ducts From The Junction Boxes And It Is Carried Upto The Panels Through Concealed Conduits Inside The Blocks. Only Provisioning Of Wires/Switches Etc Shall Be Given. All The Electrical Wires/Switches/Data Etc. Shall Not Be Part Of Furniture Supplycomplete In All Respect To Entire Satisfaction Of Engineer-In-Charge. , Lab Incharge Table Providing And Placing In Position Main Desk With Eru Of The Following Specifications. Main Desk With Eru Size Shall Be 1650 Width X 700 Depth X 743 Height (Main Desk) 1000 Width X 450Depth X 743 Height (Eru).Top Shall Be Of 18 Mm Thickness Made Of Plt Board With 2 Mm Edge Banding. Wenge And Savannah Maple Plt Board Shall Be Used. The Understructure Shall Be In Pre-Laminated Panels Made With Plt Boards . 2- Drawerand 3 - Drawer Storage Units With Different Combinations To Support Tops Made With 18 Mm Plt Boards Of Different Colours.Modesty And Back Panels Made With 18 Mm Plt Boards. The Pedestals / Storages Shall Be Fitted With Necessary Locks. The Bidder/Oem Shall Be Iso 9001, Iso 14001, Iso 45001, Greenguard, Green Pro & Bifma Membership Min 10 Years Certification And Must Have Inhouse Manufacturing Of All The Products Of Said Requirement. Oem/Bidder Should Have Completion Of All Mentioned Products.Complete In All Respect To Entire Satisfaction Of Engineer-In-Charge. , Lab Incharge Chair - Revolving High Back Providing And Placing High Back Mesh Chair Where The Seat Assembly Shall Be Made Up Of 1.2 ±0.1Cm. Thick Hot-Pressed Plywood Measured As Per Qa Method Described In Ocp-Qlta-P14-18 And Shall Be Upholstered With Fabric Upholstery Covers And Moulded Polyurethane Foam. The Product Shall Be Cii Greenpro, Griha & Indoor Advantage Gold Certified. The Dimensions Of Seat Shall Be 47.0 Cm. (W) X 48.0 Cm. (D). The Back Asembly Shall Be Made Of Powder Coated (Dft 40-60 Microns) Tubular Frame Of Dia 2.54 ±0.03Cm. X 0.2±0.016Cm Thk. Ms Erw Tube Designed With Contoured Lumbar Support For Extra Comfort. The Back Shall Be Upholstered Using Net Fabric With High Tenacity Yarn. The Dimensions Of Back Shall Be 46.5 Cm (W) X 70.5 Cm (H). The Hr Polyurethane Foam Shall Be Moulded With Density =45+/-2 Kg/M3 And Hardness Load 16 ± 2 Kgf As Per Is:7888 For 25% Compression. The One-Piece Armrests Shall Be Injection Moulded From Black Co-Polymer Polypropylene. The Mechanism Shall Be Designed With 360° Revolving Type, 17±2° Maximum Tilt M Pivot At Centre, Upright Position Locking., Tilt Tension Adjustment. The Pneumatic Height Adjustment Shall Has An Adjustment Stroke Of 11.0 ±0.3Cm. The Bellow Shall Be 3 Piece Telescopic Type And Injection Moulded In Black Polypropylene. The Pedestal Shall Be Injection Moulded In Black 33% Glass-Filled Nylon66 And Fitted With 5 Nos. Twin Wheel Castors. The Pedestal Is 66.3 ±0.5Cm. Pitch-Center Dia. (76.3 ±1.0Cm With Castors). The Twin Wheel Castors Shall Be Injection Moulded In Black Nylon. Overall Dimensions Of Chair Shall Be Seat Height - Min 43.3 To Max 54.3Cm, Height - Min93.5 To Max 104.5Cm, Width & Depth Of Chair As Measured From Pedestal - Width-76.3 Cm And Depth-76.3 Cm. Dimensions Tolerance / Variations Shall Be Within +/- 1 Cm.Complete In All Respect To Entire Satisfaction Of Engineer-In-Charge. , Staff Chair - Revolving Medium Back Providing And Placing Medium Back Mesh Chair Where The Seat Assembly Shall Be Made Up Of 1.2 ±0.1Cm. Thick Hot-Pressed Plywood Measured As Per Qa Method Described In Ocp-Qlta-P14-18 And Shall Be Upholstered With Fabric Upholstery Covers And Moulded Polyurethane Foam. The Product Shall Be Cii Greenpro, Griha & Indoor Advantage Gold Certified. The Dimensions Of Seat Shall Be 47.0 Cm. (W) X 48.0 Cm. (D). The Back Asembly Shall Be Made Of Powder Coated (Dft 40-60 Microns) Tubular Frame Of Dia 2.54 ±0.03Cm. X 0.2±0.016Cm Thk. Ms Erw Tube Designed With Contoured Lumbar Support For Extra Comfort. The Back Shall Be Upholstered Using Net Fabric With High Tenacity Yarn. The Dimensions Of Back Shall Be 46.5 Cm (W) X 60.5 Cm (H). The Hr Polyurethane Foam Shall Be Moulded With Density =45+/-2 Kg/M3 And Hardness Load 16 ± 2 Kgf As Per Is:7888 For 25% Compression. The One-Piece Armrests Shall Be Injection Moulded From Black Co-Polymer Polypropylene. The Mechanism Shall Be Designed With 360° Revolving Type, 17±2° Maximum Tilt M Pivot At Centre, Upright Position Locking., Tilt Tension Adjustment. The Pneumatic Height Adjustment Shall Has An Adjustment Stroke Of 11.0 ±0.3Cm. The Bellow Shall Be 3 Piece Telescopic Type And Injection Moulded In Black Polypropylene. The Pedestal Shall Be Injection Moulded In Black 33% Glass-Filled Nylon66 And Fitted With 5 Nos. Twin Wheel Castors. The Pedestal Is 66.3 ±0.5Cm. Pitch-Center Dia. (76.3 ±1.0Cm With Castors). The Twin Wheel Castors Shall Be Injection Moulded In Black Nylon. Overall Dimensions Of Chair Shall Be Seat Height - Min 43.3 To Max 54.3Cm, Height - Min93.5 To Max 104.5Cm, Width & Depth Of Chair As Measured From Pedestal - Width-76.3 Cm And Depth-76.3 Cm. Dimensions Tolerance / Variations Shall Be Within +/- 1 Cm. Complete In All Respect To Entire Satisfaction Of Engineer-In-Charge. , Lab Incharge & Staff Visitor Chair Providing & Placing The Fixed Visitor Mesh Chair Where The Seat Assembly Should Be Made Up Of 1.2 ±0.1Cm. Thick Hot-Pressed Plywood, Upholstered With Fabric Upholstery Covers And Moulded Polyurethane Foam. The Product Shall Be Cii Greenpro, Griha & Indoor Advantage Gold Certified. Seat Size: 47.0 Cm. (W) X 48.0 Cm. (D). The Back Asembly Should Be Made Of Powder Coated (Oft 40-60 Microns) Tubular Frame Of 0 2.54 ±0.03Cm. X 0.2 ±0.016Cm.Thk. Ms Erw Tube Designed With Contoured Lumbar Support For Extra Comfort. The Back Should Be Upholstered Using Double Layer Spacer Mesh Fabric With High Tenacity Yarn. Back Size : 46.5 Cm. (W) X 60.5Cm (H). High Resilience (Hr) Polyurethane Foam: The Hr Polyurethane Foam Should Be Moulded With Density =45+/-2 Kg/M3 And Hardness Load 16 ± 2 Kgf For 25% Compression. Armrests: The One-Piece Armrests Should Be Injection Moulded From Black Co-Polymer Polypropylene. Tubular Frame: The Powder Coated (Dft 40-60.Microns) Tubular Frame Should Be Cantilever Type & Made Of Ø2.54 ±0.03Cm. X 0.2 ±0.016Cm Thick M.S.E.R.W. Tube. Overall Dimensions Of Chair Seat Height - 46.5Cm. Height - 93.5Cm. Width & Depth Of Chair As Measured From Pedestal - Width-61.0 Cm And Depth-64.5 Cm. Complete In All Respect To Entire Satisfaction Of Engineer-In-Charge. , Staff Area - Metal Modular Storage Unit Providing And Placing In Position Metal Modular Storage Unit Where Unit Size Shall Be 900Wx450dx 1950H Having 2 Doors Of 450Mm Each. The Product Shall Be Greenguard Ul, Indoor Advantage Gold Certified. The Certificate Mentioned In The Specification Must Be Issued By An Authorized Certificate Issuer And Must Mention Product Name Along With Manufacturer Name.Knock-Down Construction & Material :- Made From Combination Of 0.5Mm & 0.8Mm Thick Crca (D Grade, Is-513) And Top Bottom Stiffner Made Of 1.2Mm Thick Crca. Door Hinges Should Be Soft Closing. Shelves Are 12 Bend Panel Made Of .7Mm Thick Crca. Each Shelve Has Maximum Load Capacity Of 55Kg Udl In 900W. There Should Be 4 Nos Of Shelves In The Cabinet. Metal Door Should Be Made Of 0.6Mm Thick Crca Steel. Handle:-Asthetically Appealing Handle Made Of Aluminium. Lipping:- Lipping 2Mm Thk On All Edges. Locking Should Be Cam Lock With 3 Way Locking Provision And Click Action Mechanism. Key Shpuld Be Removable In Locked And Unlocked Positions. Zinc Alloy Die Cast Housing. Legs Fitted With Screw Type Levellor. Finish:- Epoxy Polyester Powder Coated To The Thickness Of 50 Microns (+/-10 Micron)Complete In All Respect To Entire Satisfaction Of Engineer-In-Charge. , Staff Area - Low Height Sliding Storage Unit Providing & Placing The Low Height Sliding Storage Unit With Overall Dimensions Shall Be 900Mm(W)X450mm (D) X710mm(H). The Top Shall Be Wooden Top Plb (25 Mm Add In Unit Height). The Product Shall Be Greenguard Ul, Indoor Advantage Gold Certified & Greenpro Certified. The Rigid Knock Down Construction. Back, Sides And Door Shall Be Made From 0.7 Mm(+/-0.07Mm) High Yield Strength Crca, Rest In 0.8 Mm(+/-0.08Mm) Crca. Crca - D Grade As Per Is-513. Sliding Door Arrangement Shall Have Sliding Door Wth Top Hanging Arrangement To Prevent Derailment. Each Door Shall Be Provided With 2 Plastic Roller Having Steel Ball Bearing For Smooth Movement Of Door & Less Noise. Locking Shall Be 5 Lever Cam Lock For Safe Locking. Handle Shall Be Plastic Flush & Recessed Handle. Shelving Shall Have Height Wise Adjustable Shelf Mounting. Uniformly Distributed Load Capacity Of The Shelf Is 40 Kg Maximum. It Shall Have 1 No. Of Adjustable Full Shelf. Leveler Shall Be Screw Type Leveler With Hex Plastic Base And Overall Finish Shall Be Epoxy Polyester Coated To The Thickness Of 50 Microns. A4 Size Box File Can Be Stored Vertically On One Shelf And Clear Space Above Second Shelf Is 220 Mm. Complete In All Respect To Entire Satisfaction Of Engineer-In-Charge.