Removal Of Water Hyacinth And Silt From Canal Bed, Repair Of Cuts, Cutting And Removing Of Jungle From Canal Bank And Maintains Of All Reg Gate, Cleaning Of Chocked Outlet In Dy 07,08, 09,10 During Kharif Irrigation-2025 Under Lohai (I) Sec, Sbid, D- 1 Supplying, dressing and stacking at site bamboo pins above 5 cm.diameter and upto 7.5 cm. diameter.(Dia. to be measured at mid length). 2 Driving bamboo pins in standing or flowing water including scaffolding and driving appliances.Where boats are not necessary. 3 Supplying, fitting and fixing with iron nails half split bamboo wailing pieces (av. dia. of bamboo not less than 5.0 cm.). 4 Supplying to site empty cement polythene bags (capacity 50kg) in good condition including stacking, incedental charges etc. all complete (capacity 50 kg). 5 Labour charges for filling empty cement gunny bag / polythene bag(capacity 50 kg)with all kinds of earth (wet or dry), sand or agreegates(stone / brick) and sewing as done in case of cement bags ,(tying with a knot after filling will not be accepted ) , and stackingwithin a lead of 30 metreas per direction of Engr-in-charge (cost is excludingthe cost of any types of filling materials)NB:- Volume of earth/ sand filled bags should not be less than 0.028 Cum/bag. 6 Extra rate for item no above for each additional lead of 60 metre or part thereof beyond the initial lead of 30 metre. 7 Dumping in position earth / sand filled gunny / poly bags (capacity 50kg) within a lead of 30 metre inclusive of all lifts. 8 Earthwork in excavation in the canals / drainage channels / borrow pits /River bed / slope of bank as noted below as per designed section &throwing the spoils in layers of 25 cm. for making banks as per profile orto deposit the same in any other place within an initial lead of 30 metreand initial lift of 1.5 metre including breaking clods, rough dressing etc.complete as per direction of the Engineer-in-charge.Ordinary soil / local soil / soil mixed with moorum or kankar / silt, dryor moist / slushy silt / sticky soil. 9 Extra rate over Item Nos.1.01, 1.02 & 1.03 for all kinds of soil for every additional lift of 1.50 metre or part thereof beyond the initial lift of 1.50 metre. 10 Clearing and removal of water hyacinth including weeds, thick and thorny floating jungles and burning them to ashes when dry or removing themoutside Government land including all leads and lifts to stack in a nearby available space complete. 11 Cutting and clearing jungles including shrubs, water weeds,bushes, trees, plants, upto 30 cm. girth including removing as directed by Engineer-in-charge. 12 Oiling, cleaning & greasing the regulator gate & gate parts including guide channel, top runner, pedestal block, gear rods, wheel, fish plate etc. with sufficient lubricant as and when necessary as directed by the Engineer-in-charge including cost ofall materials to site complete. 13 Supplying, fitting, fixing Mild Steel draw shutter with Mild Steel plate of thickness as specified by the Engineer-in-charge and other necessary Mild Steel sections for sluice including fabricating the same (as per drawing and instruction given by the Engineerin-charge) excluding cost of Mild Steel guide channel, sill beam, gearing arrangement etc. but including painting with two coats of anticorrosive bituminous paint of approved make & brand over two coat of red lead primer and with necessary masonry work with all materials supply etc. complete at site. 14 Supplying, fitting and fixing top runner fabricated by ISMB / ISMC of required size, 2 nos. for each gate of required length and fitting, fixing with required nos. of anchors / lugs by Mild Steel flat bar of required size bifurcated at one end and welded with the other end with top runner and providing with required drilled holes of required dia. for base plate and all other components as required including carriage of all materials to site complete including painting with two coats of anticorrosive bituminous paint of approved make and brand over two coats of red lead primer etc. all complete as per direction of the Engineer-in-charge. 15 Supplying fitting & fixing Mild Steel base plate of required size with necessary drilled holes of required dia. and number for fixing with the top runner and one number hole at the center of required dia. for screw rod duly threaded with necessary grooving for easy roller grip arrangement by 13 mm dia. high carbon steel balls in both Gun Metal or other bushes & base plate etc & providing with required bolts and nuts (Mild Steel) 16 mm dia & 100 mm long and one suitable screw as key, complete including painting with two coat of red lead Primer. 16 Supplying, fitting & fixing Cast Iron wheel (after taking out existing one if necessary), rim made of 28 mm. to 36 mm. dia to fit any size of gear rod including carriage to site, painting with two coats of bituminous paint over two coats of red lead primer etc. complete as per direction of the Engineer-in-charge.(a) 45 cm dia. Cast Iron wheel. 17 Supplying / Replacing Gun Metal Bush for screw gearing arrangement required for hanging arrangement of draw shutter and fitting & fixing with the screw gearing arrangement for operating the draw shutter by taking out the old screw gearing arrangement and Gun Metal bush etc. complete as per direction of the Engineer-in-charge. (The old materials to be returned to Departmental Godown.)50 mm. dia. 18 Supplying / Replacing Gear rod by a new Mild Steel Gear rod, threaded length as required and fitting, fixing in position with screw gearing arrangement for operating the draw shutter including taking out old gear rod by cutting bolts etc. complete as per direction of the Engineer-in-charge. (The old materials to be returned to Departmental Godown.) 50 mm. dia. 19 Supply of Mazdoor Male / Female. 20 Loading, unloading and stacking by Manual Means.Loading in to trucks at the lifting point, unloading at destination, stacking properly in go downs or yard etc. as directed including carriage by head load up to a lead of 50.00 m at each of the two pointsSteel. 21 Carriage of Steel materials over puccaroad. 22 Supply of Fitter/ Fitter Helper of fitting Driving set, Hosting arrangement Gate shutter in positionFitter. 23 Fitter Helper.
