Tender For Ec Com Haldia It Park Civil Maintenance 2025 26 48- 1 Supplying Weather Silicone sealant of approved make and brand for fixing of grove line between the Glasses as per direction of Engineer-in-charge for Structural Glazing/Curtain wall including complete removal of old cracked sealant and fixing foam. Proper masking tape to be used to achieve clear line.Weather Silicone sealant for filling the Grove line between Glasses or any other material for facial work including labour, scaffolding/ hanging arragement and all other incidental charges complete in all respect as per specification and direction of Engineer-in-charge 2 M.S.gate of Jail type as per approved design made of strong M.S. frame work, intermediate stiffeners and round / square bars or angles. M.S. sheet (not less than 14 gauge) gussets, cleats etc. including necessary riveting, bolting, welding,locking and hanging arrangements, fitting and fixing complete, at all floor 3 Supplying fitting and fixing door frame with M.S. angle as per drawing & direction of required section.Theholes for counter sunk machine screw & nuts will be such as to fit 8 to 10mm Iron screw.The counter sunk nut to be welded. The nuts are to be welded after careful checking with screw.All welding spots should be properly filed or rounded smooth including cost of welding hinges for hing ecleats , lugs for haspbolt, socketbolt etc. and necessary M.S. clampsof 25mmx6mm flat 225mm long as per direction welded to the frame fittedand fixed in position including cost of concrete.at all floor 4 Labour charge for fabrication and installation of composite door, window, partitions made from annodized extruded alloy aluminiumsections for the following units:-(A) Glazed aluminium sliding windows made of extruded and annodized alloy aluminium sectios, fabrications, including cutting to proper shape and size, drilling and aligning of window shutter frame fitted with in built locking arrangements, sliding rollers and other necessary fittings, fixture, adhesives and joineries along with extruded neoprine or EPDM gasketing in between window frame and masonry work (walls, column, beam.lintels etc.) as well as between glass and shutter frame for fixing glass and Polysulphide sealant and in between shutter and window frame where necessary including cutting to requisite size and fixing glass as per drawing, specification and direction of EIC.The rate includes the hire charge of all tools and plants, including allincidental charges, adhesive, joineries such as screw, cleat angle etc. but excluding the cost of extruded aluminium sections, glass, neoprene / EPDM gasket, locking arrangement and rollers. 1st floorOpenable / Casement window. 5 Painting with ready mixed red lead paint of approved make and brand ( two coats ), all floors 6 Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary : On steel or other metal surface : With other than hi-gloss of approved quality-Two coats (with any shade except white), all floors 7 Labour charge for fabrication and installation of composite door,window, partitions made from annodized extruded alloy aluminiumsections for the following units:-(A) Glazed aluminium sliding windows made of extruded and annodized alloy aluminium sectios, fabrications, including cutting to proper shape and size, drilling and aligning of window shutter frame fitted with in built locking arrangements, sliding rollers and other necessary fittings, fixture, adhesives and joineries along with extruded neoprine or EPDM gasketing in between window frame and masonry work (walls, column, beam.lintels etc.) as well as between glass and shutter frame for fixing glass and Polysulphide sealant and in between shutter and window frame where necessary including cutting to requisite size and fixing glass as per drawing, specification and direction of EIC.The rate includes the hire charge of all tools and plants, including allincidental charges, adhesive, joineries such as screw, cleat angle etc. but excluding the cost of extruded aluminium sections, glass, neoprene / EPDM gasket, locking arrangement and rollers.iii ) Openable / Casement window. 8 Supplying profiles of required section made of Aluminium Alloy Extrusions conforming to IS: 732-1983 and IS: 1285- 1975; Annodized (with required film thickness and specified colour / natural) matt finished conforming to IS: 1868-1983 for fabrication of composit door, sliding & casement windows, partitions, formed of basic sections of any ISI embossed / certified make and brand as per direction of Engineer - In- Charge. (Payment will be made on finished length of the work).Casement window ( 34 mm Depth series), In 10-12 Micron thickness Annodizing film 9 Outer frame. 10 Mullion 11 Shutter 12 Glazing clip 13 Cleat angle. (Non-annodized) 14 Supplying bubble free float glass of approved make and brand conforming to IS: 2835-1987.4mm thick clear glass 15 Supplying stainless steel functional hinge for casement window as per approved brand as directed by Engineer- in -charge. (Natural White), 250 mm long 16 Providing and fixing exterior quality Aluminium Composite Panel (ACP) wall cladding on existing Al. /MS frame work with GI brackets, ACP fixed on the existing frame work by folding the edges of ACP panel (Engraving the rear surface of ACP sheet) with CP angles, cleats and strainless Steel screws forming groves at the periphery of ACP panel. Such grooves filled with foam and silicon sealant etc. complete with all materials (but including the cost of silicon sealant), labour, scaffolding and all other incidental charges complete in all respect as per specification and direction of Engineer-in-charge. (Mode of payment is on finished surface area of ACP)4mm thick (0.50mm Al.+3.0mm LDPE +0.50mm Al. PVDF coating) 17 Scraping of moss, blisters etc.thoroughly from exterior surface of walls necessitating the use of scraper, wire brush etc.(Payment against this item will be made only when this has been done on the specific direction of the Engineer-in-charge) 18 Applying Exterior grade Acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface to receive decorative textured (matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface throughly, complete as per manufacturers specification and as per direction of the EIC. 19 Ground Floor: Two Coats 20 1st Floor: Two Coats 21 2nd Floor: Two Coats 22 3rd Floor: Two Coats 23 4th Floor: Two Coats 24 Protective and Decorative Acrylic exterior emulsion paint of approved quality, as per manufacturers specification and as per direction of Engineer-in-Charge to be applied over acrylic primer as required. The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer.Normal Acrylic Emulsion 25 Ground Floor: Two Coats 26 1st Floor: Two Coats 27 2nd Floor: Two Coats 28 3rd Floor: Two Coats 29 4th Floor: Two Coats 30 Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary.[Excluding cost of chipping over concrete surface], With 1:4 cement mortar, a) 20 mm thick plaster 31 Ground Floor: Two Coats 32 1st Floor: Two Coats 33 2nd Floor: Two Coats 34 3rd Floor: Two Coats 35 4th Floor: Two Coats 36 Stripping off worn out plaster and raking out joints of walls, celings etc. upto any height and in any floor including removing rubbish within a lead of 75m as directed. 37 Labour charge for fabrication and installation of structural Glazing/Curtain Wall made from annodized extruded allooy aluminium sections for the following units:-Structural Glazing made of extruded and annodized alloy aluminiumsections, fabrications including cutting to proper shape and size, drilling including cost of brackets, fastener bolt, mullion bolt, nuts & washers, maskin tape, double side adhesieve crosslink foam (used for guard of glazed silicon on sub-frame), tissue paper foam (used as filler between sub-frame and under backing of weather silicon), screws and other necessary hardwares, fixing of glass as per drawing, specification and direction of Engineer-in-Charge. (The rate includes hire charges of all tools and plants, including all incidental charges, adhesieve, joiners such as screw,cleate angle,etc. but excluded the cost of extruded aluminium sections, glass, glazed silicon, weather silicon etc.) 38 Supplying EPDM gusket of approved make and brand as per direction of Engineer in charge. EPDM / weather gasket for outer frame and mullion.
