|
| 1 | Shamshan Ghat |
| 2 | Site clearing cutting jungle uprooting roots grass vegetation etc. |
| 3 | Boring with hydraulic piling rigs with power unit ,providing and ininstalling cast in situ single under reamed piles of specified diameter and length below pile cap in M-25 cement concrete ,to carry of safe working load not less than specified .excluding the cost of steel reinforcement bul including the cost of boring with bentonite solution and the length of the pile to be embedded in pile cap etc. all complete (length of pile for payment shall be measured upto to the bottom of pile cap) |
| 4 | Extra over single under ream for providing additional bulbs in under reamed piles, under specified (only the Nos. of extra bulbs are to be paid) |
| 5 | Excavation in foundation inBlack Cotton soil (loam clay,or sand )including lift upto 1.5 meter (5 fts )and lead upto 30m (100fts ) & including filing,watering and ramming of excavated earth into the trenches or into the space between the building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by the engineer |
| 6 | Supply and filling of Moorum soil in plinth protection /appron |
| 7 | Cementconcrete in 1:4:8 cement sand 22.40-53 mm granite stone ballast crasher broken) in foundation includingsupply of all materials, labours and T&Petc. required for proper completion of the work |
| 8 | R.C.C work in 1:1½:3 cement approved coarse sand and 20 mm gauge granite stone gritt for Pile Cap excluding supply of reinforcement and its bending but including its fixing and binding the same with 24 B.W.G.G.I. binding wire and including necessary centering and shuttering etc. also including supply of all materials,labour and T&P etc. required for proper completion of the work .Binding wire cost being included in the item. |
| 9 | R.C.C work with approved coarse sand and 2cm(3/4\") gauge approved stone ballast in the proportion of 1:1.5:3 Grade Beamexcluding supply of reinforcement and its binding wire and including its fixingand binding the same with 24 B.W.G.G.I binding wire and including necessary centering and shuttering etc and also including supply of all material labour T&P etc.required for proper completion of the work Binding |
| 10 | first classB/w1: 6 cement and fine sand of 1.25Fmmortar infoundation uptoplinthincluding supply ofall material,labour and T&P etc requiredfor proper |
| 11 | R.C.C work with approved coarse sand and 2cm(3/4\") gauge approved stone ballast in the proportion of 1:1.5:3 in Column excluding supply of reinforcement and its binding wire and including its fixingand binding the same with 24 B.W.G.G.I binding wire and including necessary centering and shuttering etc and also including supply of all material labour T&P etc.required for proper completion of the work Binding Wire cost including in the |
| 12 | E/W Filling in plinth including supplyof necessary quantity of earth from a distance of 8 Km from the side of Work and including watering |
| 13 | 12 mm thick cement plaster in 1:4 cm including supply of all material & labour T&P etc. |
| 14 | 40mm. thick in flooring 1:2:4 cement: coarse sand:20 mm. stone aggregatewith floating coat of neat cement including costof all materials Labour and T & P etc. complete |
| 15 | Finishing Walls With Waterproofing cement paint of approved make &quality on new work with three coat to give an even shade including supply of all material 7 labour t&p etc. required for proper completion of Work |
| 16 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. |
| 17 | Providing and fixing precoated galvanised iron profile sheets size ,shape and pitch of corrugation as approved by Engineer -in-charge)0.50 mm(+0.05%) total coated thickness with zinc coating,120 grams per Sqm. as per IS:277 in 240 mpa steel grade 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns epoxy primer on both side of the sheet should have protective goard filmof 25 microns minimum to avoide scratches during tranportation and should be supplide in single length upto 12 meter or as including cutting sheets to size and shape wherever required. |
| 18 | Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete. |
| 19 | mild Steel of iron in plain work such as reinforced concrete /brick Work wrought t required shape and necessary including bending for proper completion of work and including supply of steel,its wastage and hooks,suthrised over lapping shall be measured. |
| 20 | Centering and shuttering including strutting, propping etc. and removal of form for :column,plinth bend,lintel,sunshade,platform & slab. |
| 21 | Excavation in foundation in black cotton soil (in Bundelkhand area) including lift upto 1.5 m. and lead upto 30 m. and including filling, watering and ramming of excavated earth into the trenches or into the space between the building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by Engineer-in-charge a distance of 30 m. from the foundation trenches. |
| 22 | Cement concrete in 1:4:8 with cement, sand and 40mm granite stone ballast (crusher broken) in foundation including supply of all materials, labours and T&P etc. required for proper completion of the work . (Edging) |
| 23 | M 150 brick work in 1:6 cement and fine sand of 1.25 F.M. mortar in foundation and plinth including supply of all materials, labours and T&P etc. required for proper completion of the work . |
| 24 | Supply and laying of 80mm thick precast inter Lock concrete block manufacturing by Rubber Mouleded making each in size and shape (35No. Per sqm.) of minimum compressive strength 300kg/sqm over 40mm thick average stone dust with joints 3 mm thick with stone dust including labour and tempring & sweeping etc. complete to work. (Road) |
| 25 | Cement, concrete with 1:2:4 cement, coarse sand and approved 20 mm. gauge granite stone grit including supply of all materials, labour and T&P etc. required for proper completion of work. |
| 26 | Supply and fixing of Granit Black Stone sign board including painting and lettering as directed by Engineer-in-charge. |
| 27 | Add for Photography etc. |
