Tender For Work Of Full Deposit Scheme Mp Mla Fund And Other Various Deposit Schemes Done Through Running Contract Under Electricity Distribution Division Pratapgarh On Semi Turnkey Basis Including Loading And Unloading Of Material. - Safe Loading, Carria, pratapgarh-Uttar Pradesh

Tender For Work Of Full Deposit Scheme Mp Mla Fund And Other Various Deposit Schemes Done Through Running Contract Under Electricity Distribution Division Pratapgarh On Semi Turnkey Basis Including Loading And Unloading Of Material. - Safe loading, Carriage including unloading and proper stacking of following materials from store central Pratapgarh. 2 PCC Pole /STP Pole 3 11kv Pin Insulator 4 11kv Disc Insulator 5 33kv Pin Insulator 6 33kv Disc Insulator 7 X-ARM 8 Top Channel 9 MS Earthing Rod 10 Transformer 25/63/100/ KVA 11 Base Angle 12 Cable box indoor/outdoor 13 Transformer 250/400 KVA 14 ABC Cable All Size 15 11 KV XLPE Cable 16 33 KV XLPE Cable all size 17 ACSR Weasal/Rabbit/Dog Conductor 18 11 /33 KV CT/PT Unit 19 11/33 KV Metering Cubical/pilfer 20 GI Wire 21 Stay Set Complete 22 Other Line Material 23 VCB Panel 11 KV 24 Dragging of pole from JE Dump Store to site 25 Concreting & nuzzling of stay complete including fixing of necessary clamps with the help of nuts & bolts other accessorise required for completing the work as well as its grouting by civil material viz. Sand, stone ballast and cement. The contractor will provide all civil material as well as stay insulator 26 Stringing and sagging of 11 KV line with ACSR ACSR Weasal/Rabbit/Dog Conductor including nuzzling binding and jumpering (weasal conductor will be provided by the department) 27 Pipe Earthing Boring type 28 Installation of Mounting of Following capacityof Transformer including its connection between 11 KV and LT Line. 29 Mounting of 25/63/100 KVA Tranformer 30 Mounting of 250/400 KVA Tranformer 31 Installation of fixing 11 KV CT/PT. 32 Installation of fixing 11 KV Pilfer. 33 Digging of pits up to the depth of 1650/2200 mm. as per site requirement.Fabrication & erection of double pole support on P.C.C./ST pole including digging of pit & fixing of all accessories and clamps as per RESSPO norms. 34 Digging of pits up to the depth of 1650/2200 mm. as per site requirement. Fabrication & erection of single pole support on PCC/ST pole support including digging of pit & fixing of all accessories and clamps as per RESSPO norms 35 Fixing & jointing of cable box indoor/outdoor 36 Stringing and Sagging of LT ABC Cable (LT ABC Cable will be provided by the department) 37 Earthing of pole with MS Earthing. 38 Providing & Fixing of various type materials. All materials shall be supplied by the contractor. 39 Nut & Bolt 40 Different size of lug 41 Clamp for Top/ Dropper / X-arm and T-off Channel etc. 42 GI Pipe 3&4 DIA 43 GI Pipe 6 DIA 44 STP F-bracket with clamp 45 L T Clamp with nut &bolt 46 L T Insulator 47 PCC Pole F-Clamp 11 KV / 33 KV 48 Looping and Choopping of tree branches in laying on the route of line. 49 Grouting of STP/PCC pole in ratio 1:4:8 with cement stone ballast, coarse sand and plinthing 300 mm above ground level as well as muffing of plinth. 50 Laying of 11kv XLPE Cable 3x70, 120,185 Sq. By MM Manually/Drill Method 51 Laying of 33kv XLPE Cable 3x120, 3x300 Sq. MM By Manually/Drill Method 52 Testing of XLPE Cable all size. 53 Hosting of Cable all size. 54 Looping of cable and mounting of pole all size. 55 Construction of retaining wall, fabrication & erection of Wiremesh fancing of size 5+3 & 2.0 M height around Transformer and with retaining wall & 1 no. gate with locking arrangement made of MS Angle iron of size 35×35×5 mm jointed with nuts and bolts. The panel must be supported with MS Glat of size 50×6 mm. Wirremesh of size 10 SWG rectangle type, its painting as per norms of RESSPO. (All the material will be arranged by the contractor at his own cost). 56 Construction of masonry type transformer plinth of size 1.5×1.5×1.5 M with brick, cement, Coarse sand, sand & brick ballast, filling of sand in the hollow space, plastering outer surface in ratio 1:4:6 top of the plinth 4” thickness grouting of 2 nos. MS Channel of size 100×50×200 mm on the top of the plinth for placement of transformer. (All the material will be arranged by the contractor) 57 Dismentaling of 11/ 33 KV Line & poll 58 Dismentaling of 25/63/100/250 KVA T/F & Carriage site to store 59 Dismentaling & Shifting of 100/250 /400 KVA T/F 60 Installation of 11 KV VCB Panel 61 Other line work

INR 3540 /-

INR 20000.0 /-

INR 20 Lakhs /-

FileName	File Description	File Size
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB