Tender For Construction Of Community Kitchen At Stone House In Udhagamandalam Municipality
Tender Value
20 Lakhs
Estimated cost
Bid Submission
11 Jul 2025
0 days left
EMD
20000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
udhagamandalam → Tamil Nadu
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Community Kitchen At Stone House In Udhagamandalam Municipality
BOQ
| Sl. No. | Item Description |
| 1 | Construction of Community Kitchen at Stone House in Udhagamandalam Municipality |
| 2 | Dismantling the existing damaged brick masonary or stone masonary in cement mortar wall inluding removing the debries from the site and stacking usefull material at work site for reuse and all labour charges etc., complete as per standare specifications. |
| 3 | Dismantling the existing damaged plain cement concrete flooring including removel of deprices from site etc., complete as diercted by the dept officers |
| 4 | Fly Ash Brick work In CM 1:5 mix using bestFly Ash Bricks of size (230 x 110 x 70mm)using the screenedsandand all the materials should be approved by the competent technical authorities etc complete complying with standard specification--10m3 |
| 5 | Supply and fixing of Cuddapah Slab etc., complete |
| 6 | Centering for soffits of RCC slabs of plane surface like lintels, beams ,etc., including strutting 3m high using mild steel sheets of size 90cm X 60cm X and B.G 10 stiffened with M.S angles of size 25mm X 25mm X 3mm laid over silver Oak (C.W) joists of size 10cm X 6.5cm (spaced at about 90cm c/c )and supported dy casurina props of 10cm to 13cm dia (spaced of 75cm C/C complying with standard specification and directed |
| 7 | Supplying, fabricating and placing in position of Steel Reinforcement using Mild steel or Ribbed tor steel rods, for all RCC worksas per the design given by the departmental officers including cost of steel and binding wire and all labour charges for cutting, bending, tying and placing in position etc, complete as per SS. |
| 8 | Reinforced cement concrete in 1:11/2:3[one cement and one and half sand and fourtheaggregate ] using 20 mm size IRC grade machine crushed chips and excludingcost of reinforcement and centering works and including the cost of mixing,laying , curing ,and etc.,complete complying with standard specification |
| 9 | Supplying, fabricating, erecting structural steel work for roofing, and Gratings Work welded or bolted type using MS channels, angles, plates and round bars etc. conforming to IS specification as per Design given by the departmental officers etc, complete as per standard specification |
| 10 | Painting With Red Oxide Primer for new iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with two coats of best approved red oxide paint over Iron Surface including cost of priming coat etc., complete complying with standard specification. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.) |
| 11 | Paintinting two coats for New iron work surface using best quality synthetic enamel paint etc complete complying with standard specification- 10m2 |
| 12 | Supplying and fixing in position of best approved colour corrugated sheets of best quality of 0.50 mm thick with necessary bolts, bitumen washers and cutting thesheets to the required size with all labour charges including conveyance etc. complete. Data for -10 m2 |
| 13 | Filling in foundation and basement with excavated earth in layers of not more than 15 cm thick well rammed watered and compacted -1m3 etc., complete complying with standard specification. |
| 14 | Plain Cement concrete 1 : 4 : 8 (one cement, four sand and eight aggregates) using 40mm ISS HBG metal including cost and conveyance of all materials and labour charges for mixing, laying, compactingand curing etc, complete as per SS |
| 15 | Plain Cement concrete 1:2:4 (one cement, two sand and four aggregates) using 20mm ISS HBG metal including cost and conveyance of all materials and labour charges for mixing, laying, compacting and curing etc., completeas per SS |
| 16 | Flooring with shahabad Stone Slabs of 20mm thick with Machine Cut Edges of size 2\"0\" x 2\"0\" and above over a base mortar in CM 1:3 20 mm thick and pointed with cement mortar 1:3 ( one cement and three sand) using oxide powder complying with standard specification |
| 17 | Plastering with cement mortar 1: 5(One cement and five sand) 12mm thick with well fine screened sand etc., complete including finishing the surface and curing charges etc., complete complying with standard specification and as directedby the departmental officers. |
| 18 | Dadooing the sides of walls for 1.50m height from the flooring with glazed square tiles 15cm x 15cm x 6mmof best quality and colourand set in cement mortar 1:2mix and pointing with white cement nearly as directed over the plastered surface of 3m betweenfinished surface of dadooing and the plastered surfaceof walls-10m2SI NO 261-A |
| 19 | White washing two coats using best shellime and preparing the surface fit for white washing as confirming to the IS 6278-1971 --100m2 |
| 20 | Painting two coats with ready mixed Plastic Emulsion Paint approved quality and colour over a priming coat, including 05.00 thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required etc, complete as per standard specification. - 10 sq.m. |
| 21 | Paintinting two coats for old wood work surface using best quality synthetic enamel paint etc complete complying with standard specification- 10m2 |
| 22 | Wiring with 2 x 1.5 sqmm (22 0.3) PVC insulated single core unsheathed copper conductor cable of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories inflush with wall with 3mm thick hylum sheet cover with TW switch box and 5A F.T. switch with continuous earth wire connection of 14 SWG TC wire for making good of the concealed portion with suitable colour for PVC concealed light point / Fan point (For Electronic regulator). SD 23 |
| 23 | Wiring with 2 x 1.5 Sqmm ( 22/0.30) SCunsheathed sc Cu. Conductor of 1100v grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessiories with 150 x 100 x 113mm T W switch box and 5 A 3 pin non interlocking CS plug with painting of suitable colour with continious earth wire connectionof 14 SWGwire and making good of the concealed portion with suitable colour for concealed PVC Plug pointSD38 |
| 24 | Wiring with 2 x 4 Sqmm ( 56/0.30) SCunsheathed sc Cu. Conductor of 1100v grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessiories with 150 x 100 x 113 mm T W switch box and 15 A 3 pin non interlocking CS plug with painting of suitable colour with continious earth wire connectionof 14 SWGwire and making good of the concealed portion with suitable colour for concealedPowerPlug pointSD40 |
| 25 | Supply and fixing of 18W 4 Feet LED Fitting with LED |
| 26 | Providing UPVC (Un-Plasticized Polyvinyl Chloride) Door: Providing and fixing casement doors fabricated from unplasticized polyvinyl chloride (uPVC) sections. Profiles: The profiles should be three chamber system which provides high insulation properties with outer frame 60mm x 55mm with an outer wall thickness of 2.4mm. The window unit should be designed with all corner joints mitred and fusion welded. Windows should besteel reinforced with 25 x 24 × 25 mm steel reinforcement with a thickness of 1mm to have dimensional stability. The sash should be of 60 x102 mm. The mullion should be of 60 x 74 mm.The profiles should have co-extruded seals. Hardware: All the hardware like friction stays, handles should be screwed with self tapping screws. The handles, locks should be designed so that they cannot be released from outside.Glazing: The window system should be glazed with 5mm plain float glass / 6mm bison lam Installation: The profiles should be cut to length and welded 45 degrees. The window should be designed such that the water drainage does not pass through the reinforcement chamber. The window system should befixed directly to the plastered brick wall using selfexpanding nylon plug and driving ms electroplate screw into plug |
| 27 | Providing UPVC (Un-Plasticized Polyvinyl Chloride) Ventilator : Providing and fixing casement doors fabricated from unplasticized polyvinyl chloride (uPVC) sections. Profiles: The profiles should be three chamber system which provides high insulation properties with outer frame 60mm x 55mm with an outer wall thickness of 2.4mm. The window unit should be designed with all corner joints mitred and fusion welded. Windows should besteel reinforced with 25 x 24 × 25 mm steel reinforcement with a thickness of 1mm to have dimensional stability. The sash should be of 60 x102 mm. The mullion should be of 60 x 74 mm.The profiles should have co-extruded seals. Hardware: All the hardware like friction stays, handles should be screwed with self tapping screws. The handles, locks should be designed so that they cannot be released from outside.Glazing: The window system should be glazed with 5mm plain float glass / 6mm bison lam Installation: The profiles should be cut to length and welded 45 degrees. The window should be designed such that the water drainage does not pass through the reinforcement chamber. The window system should befixed directly to the plastered brick wall using selfexpanding nylon plug and driving ms electroplate screw into plug |
| 28 | Supplying and fixing in position best quality and approved make Indian made white / colour glazed earthenware wash hand basin of size 550 x 400mm (with pedestal) with a pair of cast iron brackets, including cost 15mm dia brass CP pillar tap, 32mm dia \"B\" class Gl waste pipe with rubber plug and chain, 15mm dia GM wheel valve, 15mm brass nipple, 15mm dia nylon connection, 32mm dia CP brass waste coupling including fixing of wash basin using CI brackets on to the wall in position with TW plugs and screws, rubber washers, white lead and giving necessary water supply connection and painting the brackets with two coat of painting over a priming coat of anti-corrosive paint including testing for leakages etc., complete complying with standard specification and as directed by the departmental officers. (The wash hand basin and specials should be got approved by the Executive Engineer before use on works) |
| 29 | Supplying and fixing 450mm heavy duty Exhaust fan including cost of all materials,labour, lead, lift, etc complete |
| 30 | Earth work excavation for foundationin all kinds of soils and sub soils to full depth as directed by the departmental officers except hard rockinclusive of shoring strutting and balling out water wherever necessary and refilling the sides of foundation with excavated earth in layers of 15cm thick well rammed and consolidated and depositing the surplus earth with in the compound in places shown by the departmental officers with initial lead of 10 meters and initial lift of 2 meters including cost of all labour charges etc., complete as per standard specification 23 & 24VI (S2) VII.9,10 |
| 31 | Conveyance of the excess earth by lorry for a lead of 9 Km etc., complete complying with std specifications and as directed by the departmental officers |
| 32 | Supplying and filling in foundation and basement with filling sand in layers of not more than 15 cm thick well watered rammed and con-solidated etc., complying with standard specifications |
| 33 | Plastering with the cement mortar 1:4 (one cement and Four Sand) using 20mm thick inlcuidng cost of all materials and labour charges etc |
| 34 | Supplying and fixing of Heavy Duty FRC manhole covers of 0.75 m sizes etc., complete complying with standard specifications and as directed by the departmental officers |
| 35 | Supplyt and delevery of DWC structured wall Polyethylenbe piping systems of 200 mm ID SN 8 pipe (pipe with online/ offline coupler and elastomeric sealing ring) with required specials non-smooth internal surface(Double wall) (SN 8 Class) for non-pressure underground sewerage, drainage application generally as per IS - 16098 (part 2) type B |
| 36 | Supplying and fixing in position Indian Water Closet (Oriya type) of size 580 x 440mm White/Color glazed earthen ware of approved quality and brand with \"P\" or \"S\" trap conforming to BIS with Sand cushion and forming flooring alround the closet using 40mm broken brick jelly in lime concrete 1:2:5 (One lime, Two Sand and Five brick jelly) 100mm thick and finishing the top to the required slope and including giving necessary connection to CI soil pipes (including the cost of 100mm diaCl pipe for a length of 600mm) by dismantling brick masonry wall / reinforced cement concrete roof/floor slab and making good the dismantled portion to the original condition with leakages etc., complete complying with standard specifications and as directed by the departmental officers. (The water closet should be got approved by the Executive Engineer before use on works) |
| 37 | Supplying and fixing in position white / colour glazed European Water Closet of best quality and approved make with 100 mm \"P\" or \"S\" trap connecting with Cl pipe of 100mm dia / PVC pipe of 110mm dia, double flapped rigid PVC black seat and seat cover with CP brass hinges including cost of white cement, cement for packing, spun yarn, teak wood plugs, brass screws, etc., including supplying and fixing 10 liters capacity PVC/12.5 liters capacity porcelin low level flushing tank with a pair of CI brackets, etc., complete with all fittings such as 15mm brass ball valve with polythene float with brass handle, union, coupling connected by means of 40mm white PVC flush hand using Indian adopter joint including all internal fittings. |
| 38 | Supply and delivery and fixing of HDPE tank as per IS 12701/1996 including loading, unloading, transportation and labour charges for fixing of the GI pipes and specials for pipe connection works including cutting, threading and fixing charges etc… |
| 39 | Providing Wall Panelling using one side teak wood sheet with melamine polishing with following specification.The frame using aluminium tubular section of size 50mm x 25mm x 2mm thick fixing horizontally and vertically in position with wall at interval of 0.60m in both diretions, fixing water proof plywood of 12mm thick over the aluminium frame work with necessary screws.One side teak wood sheet of 3.5mm thick will be fixed over the plywood using fevical and finishing with melamine polishing and the rate inclusive of conveyance to site and labour charges and as directed by the Departmental Officers.The design pattern, water proof plywood, OST sheet and other materials to be used shall be got approved by the Executive Engineer concerned before use on work etc., complete. |
AI Tender Summary
Tender Timeline
Jul 07, 2025
11:30 IST
Tender Published
Tender notice published.
CompletedJul 11, 2025
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJul 11, 2025
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender