Tender For Construction Of Cc Road From Amarendranath Baidya House To Gopal Baidya House At Rasapunja Under T Maheshtala Ps
Tender Value
3.72 Lakhs
Estimated cost
Bid Submission
18 Jul 2025
0 days left
EMD
7446
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
maheshtala → West Bengal
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Construction Of Cc Road From Amarendranath Baidya House To Gopal Baidya House At Rasapunja Under T Maheshtala Ps
BOQ
| Sl. No. | Item Description |
| 1 | Concrete Road |
| 2 | Close Bamboo Walling made of 65 mm to 75 mm dia Bamboos (in Single line) driven about half-length inti the ground site by site , with stout stays at an interval of 1 m , 3 nos of half split bamboo runner of same dia of fitted & fixed with nails etc.complete as per direction. iii)With bamboosof length above 2.50 m & upto 3.00 m |
| 3 | Construction of embankment with approved material obtained from borrow pits with a lift upto 1.5 m, transporting to site, spreading, grading to required slope and compacting to meet requirement of Tables 300.1 and 300.2 with a lead upto 1000 m as per Technical Specification Clause 301.5 for Rural Roads of MORD. (a) carriage up to total lead of 1.0 Km |
| 4 | Dressing and chilchalling Road flanks including cutting and filling with earth up to 150 mm average thickness finished with outward cross-grade of 1 in 30. |
| 5 | Single brick flat soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with powdered earth or local sand. |
| 6 | (A) Filling in foundation or plinth by silver sand in layers not exceeding 150 mm as directed and consolidating the same by thorough saturationwith water, ramming complete including the cost of supply of sand. (payment to be made on measurement of finished quantity) |
| 7 | Hire and labour charges for Shuttering with or without staging upto 4.0 m height using approved stout props with wooden planks/ply wood/steel sheet plate with required bracing for any kind of plain or reinforced concrete works in all sorts of minor structure including culvert, box culvert, cross-drain etc. The rate is inclusive of fitting, fixing and striking out after completion of work as per specification and direction. (b) Where staging is not required. |
| 8 | Providing and laying Design Mix concrete for plain / reinforced concrete work in any part of bridge (excluding bottom plugging) with coarse aggregates of appropriate nominal size and grading, fine aggregate (sand) conforming to proper grading zone, both of approved quality and cement, as necessary, including labour, cost and carriage of all materials and including preparation of design mix, approval of the same by the Engineer-in-Charge and cost for quality control, sampling, testing etc. all complete but excluding cost of labour and materials for formwork & reinforcement works. (a) M-15 Grade Using concrete mixer. |
| 9 | First class Brick work in cement sand mortar in steining of well, pier, abutment, wing wall, parapets cross drain. H.P. culverts, guard wall etc. including curing, scaffolding, raking out joints etc. complete including cost and carriage of all materials. |
| 10 | Plain / Reinforced Cement Concrete in Openfoundation with or without reinforcements, in any part of foundation of bridges / culverts with graded stone chips of appropriate nominal sizes, including screening and cleaning of coarse aggregates, fine aggregate (sand) conforming to proper grading zone, both of approved quality and cement, as necessary, cost of curing with water, including cost and carriage of all materials and including preparation of design mix, approval of the same bythe Engineer-in-Charge, cost for quality control, sampling, testing etc. including cost of formwork but excluding reinforcement complete as per drawing and technical specifications(.B) RCC Grade M20 I) Using concrete mixer |
| 11 | Supplyingfitting and fixing with labour for 10 cm dia Eucalyptus bullah of 5.00mtr length driving two third of total ballah at work site including dressing, making one end pointed (dia of bullah measured at 1.5m from the thicker end.)driving u c ballah piles by monkey in sorts of soil including hoisting and placing piles in position, protecting the pile head with iron ring and cutting and placing heads incl 2.00no runner of 100mm dia ballah and 100.00mm dia ballah for tie bar @2.25m c/c including coal tarring |
| 12 | ADD 18% GST |
| 13 | Add 1.00% Labour welfare cess |
AI Tender Summary
Tender Timeline
Jul 07, 2025
11:30 IST
Tender Published
Tender notice published.
CompletedJul 18, 2025
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJul 21, 2025
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender