Bids Are Invited For Repair and Overhauling Service - Substation Work; NA; Yes; Buyer Premises - - Electrical works inside the new substation at NIFTEM-K, Sonipat, Haryana. Scope of Work 1. Scope of Work General I. Dismantling, Shifting & reinstallation work for Compact Substation, DG set at the NIFTEM campus, Sonipat, Haryana as per below specification: - Sr. Items Units Qty. DISMANTLING, SHIFTING & REINSTALLATION WORK FOR COMPACT SUBSTATION 1 Dismantling, shifting existing of 630kVA, 33/0.415kV compact substation to another location removal of associated cables and terminations dismantling of foundation structures dismantling of earthing system, transportation of dismantled equipment to new site complete as required as per direction of Engineer in charge. All safety measures to be followed during execution. Job 01 2 Re‑assembly, testing & commissioning of 630 kVA compact substation—comprising transformer with on‑load tap‑changer, LV cubicle—complete with cable termination, earthing on RCC foundation with anchor bolts, busbar connections, CT/PT integration, and cost, Receiving, unloading & shifting to another location, storing, handling, installing in correct aligned position, on existing foundation. Job 01 3 SUPPLY & INSTALLATION LT CABLES (Supplying, receiving, unloading, storing laying, effecting proper connections, testing and commissioning of following sizes of 1.1 KV XLPE insulated, Aluminium conductor armoured cables laid including providing the MS supports and clamps for fixing to supports in an approved manner along with cable tags complete as required or in existing Trench/ Hume pipe and as per specifications.) Note: The cable quantities given are approximate. The contractor shall measure the cables required at site and procurement order shall be place accordingly. 3.1 3.5 C x 300 Sq. mm RM 200 3.2 3.5 C x 185 Sq. mm RM 170 3.3 3.5 C x 120 Sq. mm RM 30 4 SUPPLY & INSTALLATION LT CABLES termination (Supply and making terminal joints for the following sizes of 1.1 KV XLPE insulated Aluminium conductor cable including providing complete as required double compression glands, terminal lugs, crimping insulation tape effecting terminal connections.) 4.1 3.5 C x 300 Sq. mm Nos 06 4.2 3.5 C x 185 Sq. mm Nos 02 4.3 3.5 C x 120 Sq. mm Nos 01 DISMANTLING, SHIFTING & REINSTALLATION WORK 500kVA DG SET 5 Dismantling of existing DG set of 500kVA, (engine, alternator, control panel, exhaust), including engine, alternator, exhaust, control panel & AMF panel on new RCC plinth, complete with cable/fuel/battery reconnections, alignment, testing, and operator handover.” Dismantle foundation platform/concrete plinth if any, to be disposed of as per instructions of Engineer-in-Charge. All safety measures to be Job 01 सत्यमेवजयते राष्ट्रीय खाद्य प्रौद्योगिकी उद्यमशीलता एवं प्रबंधन संस्थान (खाद्य प्रसंस्करण उद्योग मंत्रालय ,भारत सरकार के अधीन राष्ट्रीय महत्त्व का संस्थान) National Institute of Food Technology Entrepreneurship and Management (An Institute of National Importance under Ministry of Food Processing Industries, Government of India) Electrical works inside the new substation at NIFTEM-K Page 2 of 8 followed during execution. 6 Re‑assembly, furnish labour, equipment and materials to dismantle, transport, reinstall and commission one 500 kVA diesel generator set—including engine, alternator, control panel, AMF panel, exhaust stack, foundation anchor bolts, fuel/battery/ electrical connections—complete with alignment, mechanical and electrical testing, 6‑hour load run plus 10 % overload test, earthing, documentation, and operator training, complete with all accessories as required as per direction of Engineer in charge. Job 01 7 Providing RCC foundation of M20 grade (1 Cement:1.5 Stone aggregate: 3Coarse sand) i/c excavation, steel reinforcement (Fe 500) @ 50 kg/cum of concrete contents, concrete cover 50mm, over a bed of 75mm thick PCC 1:5:10, of required dimensions as per OEM recommendations to provide levelled surface for placement of the DG set complete in all respects and as per directions of Engineer-in-charge (Size of foundation assumed = 5.0x1.Bx1.0m) Unit: per cum. 7.1 500 KVA DG Set Per foundation 8 Supplying and fixing of 11KV grade size 1000 mm x 900 mm wide chequered rubber matting confirming to IS 5424-1969 complete as required. Nos 30 9 Supplying and fixing of 33KV grade size 1000 mm x 900 mm wide chequered rubber matting confirming to IS 5424-1969 complete as required. Nos 10 10 SITC of 1200mm sweep ceiling fan providing minimum air delivery of 220Cu Mtr/Minute with power consumption not more than 50W complete in all respect powder coated aluminium die cast body & blades.
