Rural Development Government Departments Closing in 0 days TDR #50025096

Construction And 06 Year Routine Maintenance Work (Output And Performance Based) For Rural Road/Bridge Under Mukhya Mantri Gram Sampark Yojana (Awsesh) Of Works Division

Issued by Government Departments · hilsa, Bihar
Tender Value
2.59 Crore
Estimated cost
Bid Submission
15 Jul 2025
0 days left
EMD
5.19 Lakhs
Bank guarantee accepted
Document Fee
10000
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
hilsa → Bihar
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Construction and 06 year Routine Maintenance work (output and performance based) for Rural Road/Bridge under Mukhya Mantri Gram Sampark Yojana (AWSESH) of Works division

BOQ

Name of Work:MMGSY(Awsesh-SC) -2025-26 - Hilsa-22
Sl. No. Item Description
1NAME OF ROAD - PARTHU NAIMA BARBIGHA ROAD TO SALHEPURWorking benchmark Pillars - Setting Out Pillars Providing&FixingofWorkingbenchmarkPillars2 nos. per km& 6 Nos. of reference pillars required for1 Km. as per drawings given and direction of E/I
2Referencepillars-SettingOutPillars Providing& Fixing of Working benchmark Pillars 2 nos. per km& 6Nos.ofreferencepillarsrequiredfor1Km.asperdrawings given and direction of E/I
3Clearing and Grubbing Road Land (By manual means) including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees ofgirth upto 300mm, removals of stumps of such trees cut earlier & disposal ofunserviceablematerials&stackingofserviceable materials to be used or auctioned upto a lead of 1000 mincludingremovalanddisposaloftoporganicsoil notexeeding150mminthicknessaspertechnical specification clause 201.1 and direction of E/I
4Excavationforroadworkinsoilwithhydraulic excavator of0.9 cum bucket capacity including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, gradesandcross-sections,andtransportingtothe embankmentlocationwithaliftupto1.5mandlead upto1000masperTechnicalSpecificationClause
5Constructionofembankmentwithapprovedmaterial obtained from borrow pits with a lift upto 1.5m, transportingtosite,spreading,gradingtorequired slopeandcompactingtomeetrequirementofTables300.1and300.2withaleadupto100masperTechnical Specification Clause 301.5
6Constructionofembankmentwithapprovedmaterial obtained from borrow pits with a lift upto 1.5m, transportingtosite,spreading,gradingtorequired slopeandcompactingtomeetrequirementofTables300.1and300.2withaleadupto1000masperTechnical Specification Clause 301.5
7Constructionofsubgradeandearthenshoulderswith approvedmaterialobtainedfromborrowpitswithall lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of Table 300.2 with lead upto 1000 m as per TechnicalSpecification.
8Constructionofgranularsub-basebyprovidingwell graded material, spreading in uniform layers with motorgraderonpreparedsurface,mixingbymixin place method with rotavatorat OMC, and compacting withsmoothwheelrollertoachievethedesired density, complete as per Technical SpecificationClause 401. GRADING - II
9WBM GRADING - II - Providing, laying, spreading and compacting stone aggregates of specific sizes to water boundmacadamspecificationincludingspreadingin uniformthickness,handpacking,rollingwiththree wheel 80-100 kN static roller in stages to proper grade andcamber,applyingandbrooming,crushable screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 2 as per Technical Specification Clause 405.
10WetMixMacadam-Providing,laying,spreadingand compacting graded stone aggregate to wet mix macadam specification including premixingthe material with water at OMC in mechanical mixer (Pug Mill), carriage of mixed material by tipper to site, laying inuniformlayersinsub-base/basecourseonawell prepared sub-base and compacting with smooth wheelrollerof80to100kNweighttoachievethedesired density including lighting, barricading and
11Providing and applying primer coat with Bitumen emulsion (SS-1)on prepared surface of granular base including cleaning of road surface and spraying primer attherateof0.70-1.0kg/sqmusingmechanical means as per Technical Specification Clause 502.
12MIX SEAL SURFACING - Providing, laying and rolling ofclose-gradedpremixsurfacingmaterialof20mm thicknesscomposedof13.2mmto0.9mm(Type-B) aggregatesusingpenetrationgradebitumento requiredline,gradeandleveltoserveaswearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 8-10 kN static roller and finishing to required level and grades as per Technical Specification Clause 509.
13Providingandapplyingtackcoatwithbitumen emulsionusingemulsionpressuredistributoratthe rateof0.25to0.30kgpersqmontheprepared granularsurfacetretaedwithPrimerandclenedwith hydrilocbroomaspertechnicalspecificationaclouse503.
14Construction of un-reinforced, dowel jointed, plain cement concrete pavement over a prepared sub base with approve grade cement @ 400 kg per cum, coarse andfineaggregateconformingtoIS383,maximum size of coarse aggregate not exceeding 25 mm, mixed inabatchingandmixingplantasperapprovedmix design, transported to site, laid with a fixed form or slip form paver, spread, compacted and finished in a continuous operation including provision of contraction, expansion,constructionandlongitudinaljoints,joint filler, separation membrane, sealant primer, joint sealant, debonding strip, dowel bar, tie rod, admixtures asapproved,curingcompound,finishingtolinesand grades as per drawing
15Hard Shouldering- Laying brick soling layer on preparedsub-gradewithbrickonendedging according to lines, graded and cross-section shown on the drawing filling joints with sand and earth, spreading 25 mm thick layer of earth over bricksoling, watering and rolliing the same with threewheel road roller 80- 100 kN as per Technical Specification Clause 412
16KMStone-ReinforcedcementconcreteM15grade kilometrelocalstoneofstandarddesignasperIRC:8 fixing in position including painting and printing , etc as per drawing and technical specification clause 1703.
17200 M Stone- Reinforced cement concrete M15 grade kilometrelocalstoneofstandarddesignasperIRC:8 fixing in position including painting and printing , etc as per drawing and technical specification clause 1703.
18Painting two coats including primer coat after filling the surfacewithsyntheticenamelpaintinallshadeson new, plastered / concrete surfaces as per drawing and Technical Specification Clause 1701 (For culverts)
19Cable Duct Across the Road - Providing and laying of areinforcedcementconcretepipeduct,300mmdia, acrosstheroad(newconstruction),extendingfrom drain to drain in cuts and toe of slope to toe of slope in fills,constructingheadwallsatbothends,providinga minimum fill ofgranular material over top and sides of RCC pipe as per IRC:981997,bedded on a 0.3 m thick layer of granular material free of rock pieces, outer to outer distance of pipe at least halfdia ofpipe subject to minimum 450 mm in case ofdouble and triple row ducts, joints to be made leak proof, invert level of duct to be above higher than ground level to prevent entry ofwateranddirt,allasperIRC:98-1997andapproved drawings.
20600 mm equilateral & triangle - Providing and fixing of retro-reflectorised cautionary, mandatoryand informatory sign as per IRC:67 made of encapsulated lens type reflective sheeting vide Clause1701.2.3 fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground levelasperdrawingsandTechnicalSpecificationClause 801
21600 mm circular - Providing and fixing of retro- reflectorised cautionary, mandatoryandinformatory signasperIRC:67madeofencapsulatedlenstype reflectivesheetingvideClause1701.2.3fixedover aluminium sheeting, 1.5 mm thick supported on a mild steelangleironpost75mmx75mmx6mmfirmly fixedtothegroundbymeansofproperlydesigned foundation with M15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per drawings and Technical Specification Clause 801
22600 mm x 450 mm rectangular - Providing and fixing of retro-reflectorised cautionary, mandatoryand informatory sign as per IRC:67 made of encapsulated lens type reflective sheeting vide Clause1701.2.3 fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground levelasperdrawingsandTechnicalSpecification
23Printingnew letter andfigures ofanyshadewith syntheticenamelpaintblackoranyotherapproved colourtogiveanevenshadeasperdrawingsandTechnical Specification Clause 1701
24Plantingoftreesbytheroadside(Avenuetrees)in0.60 m dia holes, 1 m deep dug in the ground, mixing the soil with decayed farm yard/sludge manure, plantingthesaplings,backfillingthetrench,watering, fixing the tree guard and maintaining the plants for oneyear
25Providing and laying of hot applied thermoplastic compound2.5mmthickincludingreflectorisingglass beads@ 250 gms per sqm area, thickness of 2.5 mm isexclusiveofsurfaceappliedglassbeadsasper IRC:35.Thefinishedsurfacetobelevel,uniformandfree from streaks and holes. (BT)
26Providing and laying of hot applied thermoplastic compound2.5mmthickincludingreflectorisingglass beads@ 250 gms per sqm area, thickness of 2.5 mm isexclusiveofsurfaceappliedglassbeadsasper IRC:35.Thefinishedsurfacetobelevel,uniformandfree from streaks and holes. (PCC)
27Providing and fixing of typical MMGSY informatory sign board with Logo and Maintenance Board as per MORD specifications and drawing. Three MS Plates of1.6mmthick,topandmiddleplatedulyweldedwith MS flat iron 25mm x 5m size on back on edges.The lower plate will be welded with MS angle iron frame of 25mmx25mmx5mm.Theangleironframeofthe lower most plate and flat iron frame of middle plate will be welded to 2 nos. 75mm x 75 mm of 12 SWG sheet tubespostsduly embeddedin cementconcrete M-15 gradeblocksof450mmx450mmx600mm,600mm belowgroundlevel. Thetopmostdiamondplatewill beweldedtomiddleplateby47mmx47mmof12 SWG steel plate tube.All M.S. will be stove enameled onbothsides. Letteringandprintingarrows,border etc. will be painted with ready mixed synthetic enamel paint of superior quality in required shade and colour. Allsectionsofframedpostsandsteeltubewillbe paintedwithprimerandtwocoatsofepoxypaintasper drawing Clause 1701 and Annexure 1700.1
28Brickmasonryworkincementmortar1:3inparapetexcludingpointingandplasteringasperdrawingand technical specifications Clauses 600, 900 and 1208.4
29Plasteringwithcementmortar(1:4)onbrickworkinsub-structure as per Technical Specifications
30Painting two coats including primer coat after filling the surfacewithsyntheticenamelpaintinallshadeson new, plastered / concrete surfaces as per drawing andTechnical Specification Clause 1701
31Earthworkinexcavationforfoundationofstructuresupto 3.0 m depth as per drawing and technical specification clause 1104
32SandFillinginFoundationTrenchesasperdrawing andtechnicalspecificationClause1108-rateasperitem No. 11.2 (I) of Chapter 11
33BrickFlatSolinginfoundation:--BrickFlatSolingin foundationTrenchesasperdrawingandtechnicalspecification Clause 1108
34ProvidingPCC Grade M15for plain/reinforced concreteinopenfoundationscompleteasper drawings and technical specifications Clause 802, 803,1202 & 1203
35Providing and laying 1000 mm DiaRCC pipe NP-3 for culvertsonfirstclassbeddingofPCCM10(1:3:6)in singlerowincludingfixingcollarwithcementmortar 1:2 but excluding excavation,protection works,backfilling concrete and masonary works inhead
36ProvidingPCC Grade M15for plain/reinforcedconcreteinSubStructurecompleteasperdrawings and technical specifications
37Plain/Reinforcedcementconcrete(M-20)in substructurecompleteasperdrawingsandtechnical specificationClauses802,804,805,806,807,1202ans 1204
38RCCM25 inDeckSlab:--Providingandlaying reinforcedcementconcrete insuperstructure(Deck slab M25) as per drawing and technical specificationsClauses 800, 1205.4, 1205.5
39Providing weepholes in brick masonry/stone masonry, plain/reinforcedconcreteabutment,wingwall,return wallwith100mmdiaACpipeextendingthroughthe fullwidthofthestructureswithslopeof1(V):20(H) towardsdrawingfacecompleteasperdrawingand technical specification Clauses 614, 709, 1204.3.7
40Supplying, fitting and placing HYSD bar reinforcementin super-structure complete as per drawing and technical specifications
41Providingandfillingjointsealingcompoundasperdrawings and technical specifications with coarse sand and 6 per centbitumen by weight
42Drainage spoutscompleteasperdrawing andtechnical specifications Clause 1209.
43ProvidingandlayingRCCpipeNP-3600mmdiafor culverts on first class bedding of PCC M10 material in singlerowincludingfixingcollarwithcementmortar 1:2 but excluding excavation,protection works,backfilling concrete and masonary works inhead walls and parapets as per clause 1106
44Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry,cementconcrete,woodwork,steelwork, includingT&Pandscaffoldingwherevernecessary, sorting the dismantled material, disposal of unserviceablematerialandstackingtheserviceable materialwithallliftsandleadof 1000masper Technical Specification Clause 202. Cement Concrete
45Dismantling of existing structures like culverts, bridges, retaining walls and other structures comprising of brick masonry,includingdisposalofunserviceablematerial andstackingtheserviceablematerialwithallliftand lead of 1000 m as per Technical Specification Clause202. Cement mortar
46Removing all types of Hume pipes and stacking including Earthwork and Dismantling of Masonry Works asperTechnicalSpecification Clause202.Above 600 mm to 900 mm dia Hume pipe
47ADD LABOUR CESS @ 1% (b)
48SEIGNIORAGE FEE (c)
49ADD GST @ 18% on (a+b+c)
50Providingandapplyingtackcoatwithbitumen emulsionusingemulsionpressuredistributoratthe rateof0.25to0.30kgpersqmontheprepared granularsurfacetretaedwithPrimerandclenedwith hydrilocbroomaspertechnicalspecificationaclouse503.
51Providingandlayingsemidensebituminousconcrete with 100-120 TPH batch type HMP producing an averageoutputof75tonnesperhourusingcrushed aggregatesofspecifiedgrading,premixedwith bituminous binder @ 4.5 to 5 per cent of mix and filler, transportingthehotmixtoworksite,layingwitha hydrostaticpaverfinisherwithsensorcontroltothe required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRTHspecification clause No. 508 complete in all respects.
52Providing and laying of hot applied thermoplastic compound2.5mmthickincludingreflectorisingglass beads @ 250 gms per sqm area, thickness of 2.5 mm isexclusiveofsurfaceappliedglassbeadsasper IRC:35.Thefinishedsurfacetobe level,uniform andfree from streaks and holes.
53ADD LABOUR CESS @ 1% (b)
54SEIGNIORAGE FEE (c)
55ADD GST @ 18% on (a+b+c)
561st Year Operation & Management Cost
572nd Year Operation & Management Cost
583rd Year Operation & Management Cost
594th Year Operation & Management Cost
605th Year Operation & Management Cost
616th Year Operation & Management Cost
62ADD LABOUR CESS @ 1% (b)
63SEIGNIORAGE FEE (c)
64ADD GST @ 18% on (a+b+c)
65NAME OF ROAD - AUNGARI TO BENIPUR RCD ROAD TO CHANDIPURWorking benchmark Pillars - Setting Out Pillars Providing&FixingofWorkingbenchmarkPillars2 nos. per km& 6 Nos. of reference pillars required for1 Km. as per drawings given and direction of E/I
66Referencepillars-SettingOutPillars Providing& Fixing of Working benchmark Pillars 2 nos. per km& 6Nos.ofreferencepillarsrequiredfor1Km.asperdrawings given and direction of E/I
67Clearing and Grubbing Road Land (By manual means) including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees ofgirth upto 300mm, removals of stumps of such trees cut earlier & disposal ofunserviceablematerials&stackingofserviceable materials to be used or auctioned upto a lead of 1000 mincludingremovalanddisposaloftoporganicsoil notexeeding150mminthicknessaspertechnical specification clause 201.1 and direction of E/I
68Constructionofembankmentwithapprovedmaterial obtained from borrow pits with a lift upto 1.5m, transportingtosite,spreading,gradingtorequired slopeandcompactingtomeetrequirementofTables300.1and300.2withaleadupto100masperTechnical Specification Clause 301.5
69Constructionofembankmentwithapprovedmaterial obtained from borrow pits with a lift upto 1.5m, transportingtosite,spreading,gradingtorequired slopeandcompactingtomeetrequirementofTables300.1and300.2withaleadupto1000masperTechnical Specification Clause 301.5
70Constructionofsubgradeandearthenshoulderswith approvedmaterialobtainedfromborrowpitswithall lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of Table 300.2 with lead upto 1000 m as per TechnicalSpecification.
71Constructionofgranularsub-basebyprovidingwell graded material, spreading in uniform layers with motorgraderonpreparedsurface,mixingbymixin place method with rotavatorat OMC, and compacting withsmoothwheelrollertoachievethedesired density, complete as per Technical SpecificationClause 401. GRADING - II
72WBM GRADING - II - Providing, laying, spreading and compacting stone aggregates of specific sizes to water boundmacadamspecificationincludingspreadingin uniformthickness,handpacking,rollingwiththree wheel 80-100 kN static roller in stages to proper grade andcamber,applyingandbrooming,crushable screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 2 as per Technical Specification Clause 405.
73WetMixMacadam-Providing,laying,spreadingand compacting graded stone aggregate to wet mix macadam specification including premixingthe material with water at OMC in mechanical mixer (Pug Mill), carriage of mixed material by tipper to site, laying inuniformlayersinsub-base/basecourseonawell prepared sub-base and compacting with smooth wheelrollerof80to100kNweighttoachievethedesired density including lighting, barricading and
74Providing and applying primer coat with Bitumen emulsion (SS-1)on prepared surface of granular base including cleaning of road surface and spraying primer attherateof0.70-1.0kg/sqmusingmechanical means as per Technical Specification Clause 502.
75MIX SEAL SURFACING - Providing, laying and rolling ofclose-gradedpremixsurfacingmaterialof20mm thicknesscomposedof13.2mmto0.9mm(Type-B) aggregatesusingpenetrationgradebitumento requiredline,gradeandleveltoserveaswearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 8-10 kN static roller and finishing to required level and grades as per Technical Specification Clause 509.
76Providingandapplyingtackcoatwithbitumen emulsionusingemulsionpressuredistributoratthe rateof0.25to0.30kgpersqmontheprepared granularsurfacetretaedwithPrimerandclenedwith hydrilocbroomaspertechnicalspecificationaclouse503.
77Construction of un-reinforced, dowel jointed, plain cement concrete pavement over a prepared sub base with approve grade cement @ 400 kg per cum, coarse andfineaggregateconformingtoIS383,maximum size of coarse aggregate not exceeding 25 mm, mixed inabatchingandmixingplantasperapprovedmix design, transported to site, laid with a fixed form or slip form paver, spread, compacted and finished in a continuous operation including provision of contraction, expansion,constructionandlongitudinaljoints,joint filler, separation membrane, sealant primer, joint sealant, debonding strip, dowel bar, tie rod, admixtures asapproved,curingcompound,finishingtolinesand grades as per drawing
78Hard Shouldering- Laying brick soling layer on preparedsub-gradewithbrickonendedging according to lines, graded and cross-section shown on the drawing filling joints with sand and earth, spreading 25 mm thick layer of earth over bricksoling, watering and rolliing the same with threewheel road roller 80- 100 kN as per Technical Specification Clause 412
79KMStone-ReinforcedcementconcreteM15grade kilometrelocalstoneofstandarddesignasperIRC:8 fixing in position including painting and printing , etc as per drawing and technical specification clause 1703.
80200 M Stone- Reinforced cement concrete M15 grade kilometrelocalstoneofstandarddesignasperIRC:8 fixing in position including painting and printing , etc as per drawing and technical specification clause 1703.
81Painting two coats including primer coat after filling the surfacewithsyntheticenamelpaintinallshadeson new, plastered / concrete surfaces as per drawing and Technical Specification Clause 1701 (For culverts)
82Cable Duct Across the Road - Providing and laying of areinforcedcementconcretepipeduct,300mmdia, acrosstheroad(newconstruction),extendingfrom drain to drain in cuts and toe of slope to toe of slope in fills,constructingheadwallsatbothends,providinga minimum fill ofgranular material over top and sides of RCC pipe as per IRC:981997,bedded on a 0.3 m thick layer of granular material free of rock pieces, outer to outer distance of pipe at least halfdia ofpipe subject to minimum 450 mm in case ofdouble and triple row ducts, joints to be made leak proof, invert level of duct to be above higher than ground level to prevent entry ofwateranddirt,allasperIRC:98-1997andapproved drawings.
83600 mm equilateral & triangle - Providing and fixing of retro-reflectorised cautionary, mandatoryand informatory sign as per IRC:67 made of encapsulated lens type reflective sheeting vide Clause1701.2.3 fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground levelasperdrawingsandTechnicalSpecificationClause 801
84600 mm circular - Providing and fixing of retro- reflectorised cautionary, mandatoryandinformatory signasperIRC:67madeofencapsulatedlenstype reflectivesheetingvideClause1701.2.3fixedover aluminium sheeting, 1.5 mm thick supported on a mild steelangleironpost75mmx75mmx6mmfirmly fixedtothegroundbymeansofproperlydesigned foundation with M15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per drawings and Technical Specification Clause 801
85600 mm x 450 mm rectangular - Providing and fixing of retro-reflectorised cautionary, mandatoryand informatory sign as per IRC:67 made of encapsulated lens type reflective sheeting vide Clause1701.2.3 fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground levelasperdrawingsandTechnicalSpecification
86Printingnew letter andfigures ofanyshadewith syntheticenamelpaintblackoranyotherapproved colourtogiveanevenshadeasperdrawingsandTechnical Specification Clause 1701
87Plantingoftreesbytheroadside(Avenuetrees)in0.60 m dia holes, 1 m deep dug in the ground, mixing the soil with decayed farm yard/sludge manure, plantingthesaplings,backfillingthetrench,watering, fixing the tree guard and maintaining the plants for oneyear
88Providing and laying of hot applied thermoplastic compound2.5mmthickincludingreflectorisingglass beads@ 250 gms per sqm area, thickness of 2.5 mm isexclusiveofsurfaceappliedglassbeadsasper IRC:35.Thefinishedsurfacetobelevel,uniformandfree from streaks and holes. (BT)
89Providing and laying of hot applied thermoplastic compound2.5mmthickincludingreflectorisingglass beads@ 250 gms per sqm area, thickness of 2.5 mm isexclusiveofsurfaceappliedglassbeadsasper IRC:35.Thefinishedsurfacetobelevel,uniformandfree from streaks and holes. (PCC)
90Providing and fixing of typical MMGSY informatory sign board with Logo and Maintenance Board as per MORD specifications and drawing. Three MS Plates of1.6mmthick,topandmiddleplatedulyweldedwith MS flat iron 25mm x 5m size on back on edges.The lower plate will be welded with MS angle iron frame of 25mmx25mmx5mm.Theangleironframeofthe lower most plate and flat iron frame of middle plate will be welded to 2 nos. 75mm x 75 mm of 12 SWG sheet tubespostsduly embeddedin cementconcrete M-15 gradeblocksof450mmx450mmx600mm,600mm belowgroundlevel. Thetopmostdiamondplatewill beweldedtomiddleplateby47mmx47mmof12 SWG steel plate tube.All M.S. will be stove enameled onbothsides. Letteringandprintingarrows,border etc. will be painted with ready mixed synthetic enamel paint of superior quality in required shade and colour. Allsectionsofframedpostsandsteeltubewillbe paintedwithprimerandtwocoatsofepoxypaintasper drawing Clause 1701 and Annexure 1700.1
91Earthworkinexcavationforfoundationofstructuresupto 3.0 m depth as per drawing and technical specification clause 1104
92SandFillinginFoundationTrenchesasperdrawing andtechnicalspecificationClause1108-rateasperitem No. 11.2 (I) of Chapter 11
93BrickFlatSolinginfoundation:--BrickFlatSolingin foundationTrenchesasperdrawingandtechnicalspecification Clause 1108
94ProvidingPCC Grade M15for plain/reinforced concreteinopenfoundationscompleteasper drawings and technical specifications Clause 802, 803,1202 & 1203
95Providing and laying 1000 mm DiaRCC pipe NP-3 for culvertsonfirstclassbeddingofPCCM10(1:3:6)in singlerowincludingfixingcollarwithcementmortar 1:2 but excluding excavation,protection works,backfilling concrete and masonary works inhead
96Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry,cementconcrete,woodwork,steelwork, includingT&Pandscaffoldingwherevernecessary, sorting the dismantled material, disposal of unserviceablematerialandstackingtheserviceable materialwithallliftsandleadof 1000masper Technical Specification Clause 202. Cement Concrete
97Dismantling of existing structures like culverts, bridges, retaining walls and other structures comprising of brick masonry,includingdisposalofunserviceablematerial andstackingtheserviceablematerialwithallliftand lead of 1000 m as per Technical Specification Clause202. Cement mortar
98Removing all types of Hume pipes and stacking including Earthwork and Dismantling of Masonry Works asperTechnicalSpecification Clause202.Above 600 mm to 900 mm dia Hume pipe
99ADD LABOUR CESS @ 1% (b)
100SEIGNIORAGE FEE (c)
101ADD GST @ 18% on (a+b+c)
102Providingandapplyingtackcoatwithbitumen emulsionusingemulsionpressuredistributoratthe rateof0.25to0.30kgpersqmontheprepared granularsurfacetretaedwithPrimerandclenedwith hydrilocbroomaspertechnicalspecificationaclouse 503.
103Providingandlayingsemidensebituminousconcrete with 100-120 TPH batch type HMP producing an averageoutputof75tonnesperhourusingcrushed aggregatesofspecifiedgrading,premixedwith bituminous binder @ 4.5 to 5 per cent of mix and filler, transportingthehotmixtoworksite,layingwitha hydrostaticpaverfinisherwithsensorcontroltothe required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRTHspecification clause No. 508 complete in all respects.
104Providing and laying of hot applied thermoplastic compound2.5mmthickincludingreflectorisingglass beads @ 250 gms per sqm area, thickness of 2.5 mm isexclusiveofsurfaceappliedglassbeadsasper IRC:35.Thefinishedsurfacetobe level,uniform andfree from streaks and holes.
105ADD LABOUR CESS @ 1% (b)
106SEIGNIORAGE FEE (c)
107ADD GST @ 18% on (a+b+c)
1081st Year Operation & Management Cost
1092nd Year Operation & Management Cost
1103rd Year Operation & Management Cost
1114th Year Operation & Management Cost
1125th Year Operation & Management Cost
1136th Year Operation & Management Cost
114ADD LABOUR CESS @ 1% (b)
115SEIGNIORAGE FEE (c)
116ADD GST @ 18% on (a+b+c)
117NAME OF ROAD - EKANGAR ISLAMPUR ROAD TO GOMHAR TO GOVINDPUR HIRAIBIGHAWorking benchmark Pillars - Setting Out Pillars Providing&FixingofWorkingbenchmarkPillars2 nos. per km& 6 Nos. of reference pillars required for1 Km. as per drawings given and direction of E/I
118Referencepillars-SettingOutPillars Providing& Fixing of Working benchmark Pillars 2 nos. per km& 6Nos.ofreferencepillarsrequiredfor1Km.asperdrawings given and direction of E/I
119Clearing and Grubbing Road Land (By manual means) includinguprootingwildvegetation,grass,bushes, shrubs, saplings and trees ofgirth upto 300mm, removals of stumps of such trees cut earlier & disposal of unserviceable materials & stacking of serviceablematerialsto be usedorauctionedupto a lead of 1000 m including removal and disposal of top organicsoil not exeeding150mmin thicknessas per technicalspecificationclause201.1anddirectionof
120Constructionofembankmentwithapprovedmaterial obtained from borrowpits witha liftupto 1.5m, transportingtosite,spreading,gradingtorequired slopeand compactingto meet requirement of Tables300.1and300.2withaleadupto100masperTechnical Specification Clause 301.5
121Constructionofembankmentwithapprovedmaterial obtained from borrowpits witha liftupto 1.5m, transportingtosite,spreading,gradingtorequired slopeand compactingto meet requirement of Tables300.1and300.2withaleadupto1000masperTechnical Specification Clause 301.5
122Constructionofsubgradeandearthenshoulderswith approvedmaterialobtainedfromborrowpitswithall lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of Table 300.2 with lead upto 1000 m as per TechnicalSpecification.
123Constructionofgranularsub-basebyprovidingwell graded material, spreading in uniform layers with motorgraderonpreparedsurface,mixingbymixin place method with rotavatorat OMC, and compacting withsmooth wheel rollertoachievethe desired density, complete as per Technical SpecificationClause 401. GRADING - II
124WBM GRADING - II - Providing, laying, spreading and compacting stone aggregates of specific sizes to water boundmacadamspecificationincludingspreadingin uniformthickness,handpacking,rollingwiththree wheel 80-100 kN static roller in stages to proper grade andcamber,applyingandbrooming, crushable screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 2 as per Technical Specification Clause 405.
125WetMixMacadam-Providing,laying,spreadingand compacting graded stone aggregate to wet mix macadamspecificationincludingpremixingthe material with water at OMC in mechanical mixer (Pug Mill), carriage of mixed material by tipper to site, laying inuniformlayersinsub-base/basecourseonawell prepared sub-base and compacting with smooth wheelrollerof80to100kNweighttoachievethedesired density including lighting, barricading and
126Providing and applying primer coat with Bitumen emulsion (SS-1)on prepared surface of granular base including cleaning of road surface and spraying primer attherateof0.70-1.0kg/sqmusingmechanical means as per Technical Specification Clause 502.
127MIX SEAL SURFACING - Providing, laying and rolling ofclose-gradedpremixsurfacingmaterialof20mm thicknesscomposedof13.2 mmto 0.9 mm (Type-B) aggregatesusingpenetrationgradebitumento requiredline,gradeandleveltoserveaswearing course on a previously prepared base, including mixinginasuitableplant,layingandrollingwitha three wheel 8-10 kN static roller and finishingto requiredlevelandgradesasperTechnical
128Providingand applyingtack coat with bitumen emulsionusingemulsionpressuredistributoratthe rateof0.25to0.30kgpersqmontheprepared granularsurfacetretaedwithPrimerandclenedwith hydrilocbroomaspertechnicalspecificationaclouse503.
129Construction of un-reinforced, dowel jointed, plain cement concrete pavement over a prepared sub base with approve grade cement @ 400 kg per cum, coarse andfineaggregateconformingtoIS383,maximum size of coarse aggregate not exceeding 25 mm, mixed inabatchingandmixingplantasperapprovedmix design, transported to site, laid with a fixed form or slip form paver,spread,compacted and finished in a continuousoperationincludingprovisionof contraction,expansion,constructionandlongitudinal joints, joint filler, separationmembrane, sealant primer,jointsealant,debondingstrip,dowelbar,tie rod, admixtures as approved, curing compound, finishing to lines and grades as per drawing
130Hard Shouldering- Laying brick soling layer on preparedsub-gradewithbrickonendedging according to lines, graded and cross-section shown on the drawing filling joints with sand and earth, spreading 25 mm thick layer of earth over brick soling, watering and rolliing the same with threewheel road roller 80- 100 kN as per Technical Specification Clause 412
131KMStone-ReinforcedcementconcreteM15grade kilometrelocalstoneofstandarddesignasperIRC:8 fixing in position including painting and printing , etc as per drawing and technical specification clause 1703.
132200 M Stone- Reinforced cement concrete M15 grade kilometrelocalstoneofstandarddesignasperIRC:8 fixing in position including painting and printing , etc as per drawing and technical specification clause 1703.
133Painting two coats including primer coat after filling the surfacewithsyntheticenamelpaintinallshadeson new, plastered / concrete surfaces as per drawing and Technical Specification Clause 1701 (For culverts)
134Cable Duct Across the Road - Providing and laying of areinforcedcementconcretepipeduct,300mmdia, acrosstheroad(newconstruction),extendingfrom drain to drain in cuts and toe of slope to toe of slope in fills,constructinghead wallsat both ends,providinga minimum fill ofgranular material over top and sides of RCC pipe as per IRC:981997,bedded on a 0.3 m thick layer of granular material free of rock pieces, outer to outer distance of pipe at least half dia of pipe subject to minimum 450 mm in case of double and triple row ducts, joints to be made leak proof, invert level of duct to be above higher than ground level to prevent entry ofwateranddirt,allasperIRC:98-1997andapproved drawings.
135600 mm equilateral & triangle - Providing and fixing of retro-reflectorisedcautionary,mandatoryand informatory sign as per IRC:67 made of encapsulated lenstypereflectivesheetingvideClause1701.2.3 fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground levelasper drawingsandTechnicalSpecificationClause 801
136600 mm circular - Providing and fixing of retro- reflectorisedcautionary,mandatoryandinformatory signasperIRC:67madeofencapsulatedlenstype reflectivesheetingvideClause1701.2.3fixedover aluminium sheeting, 1.5 mm thick supported on a mild steelangleironpost75mmx 75 mmx 6mmfirmly fixedtothegroundbymeansofproperlydesigned foundation with M15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per drawings and Technical Specification Clause 801
137600 mm x 450 mm rectangular- Providingand fixing ofretro-reflectorisedcautionary,mandatoryand informatory sign as per IRC:67 made of encapsulated lenstypereflectivesheetingvideClause1701.2.3 fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground levelasper drawingsandTechnicalSpecification
138Printingnewletterandfiguresofanyshadewith syntheticenamelpaintblackoranyotherapproved colourtogiveanevenshadeasperdrawingsandTechnical Specification Clause 1701
139Plantingoftreesbytheroadside(Avenuetrees)in0.60 m dia holes, 1 m deep dug in the ground, mixing the soil with decayed farm yard/sludge manure, plantingthesaplings,backfillingthetrench,watering, fixing the tree guard and maintaining the plants for one year
140Providing and laying of hot applied thermoplastic compound2.5 mmthickincludingreflectorisingglass beads@ 250 gms per sqm area, thickness of 2.5 mm isexclusiveofsurfaceappliedglassbeadsasper IRC:35.Thefinishedsurfacetobelevel,uniformandfree from streaks and holes. (BT)
141Providing and laying of hot applied thermoplastic compound2.5 mmthickincludingreflectorisingglass beads@ 250 gms per sqm area, thickness of 2.5 mm isexclusiveofsurfaceappliedglassbeadsasper IRC:35.Thefinishedsurfacetobelevel,uniformandfree from streaks and holes. (PCC)
142ProvidingandfixingoftypicalMMGSYinformatory signboardwithLogo andMaintenanceBoardasper MORD specifications and drawing. Three MS Plates of1.6mmthick,topandmiddleplatedulyweldedwith MS flat iron 25mm x 5m size on back on edges.The lower plate will be welded with MS angle iron frame of 25mmx25mmx5mm.Theangleironframeofthe lower most plate and flat iron frame of middle plate will be welded to 2 nos. 75mm x 75 mm of 12 SWG sheet tubes posts duly embedded in cement concrete M-15 gradeblocksof450mmx 450mmx600mm,600mm below groundlevel.Thetopmost diamondplate will beweldedtomiddleplateby47mmx47mmof12 SWG steel plate tube.All M.S. will be stove enameled onbothsides. Letteringandprintingarrows,border etc. will be painted with ready mixed synthetic enamel paint of superior quality in required shade and colour. Allsectionsofframedpostsandsteeltubewillbe paintedwithprimerandtwocoatsofepoxypaintasper drawing Clause 1701 and Annexure 1700.1
143Earthworkinexcavationforfoundationofstructuresupto 3.0 m depth as per drawing and technical specification clause 1104
144SandFillinginFoundationTrenchesasperdrawing and technicalspecificationClause 1108 - rate as peritem No. 11.2 (I) of Chapter 11
145ProvidingPCC Grade M15 for plain/reinforced concrete in openfoundationscompleteas per drawings and technical specifications Clause 802,803, 1202 & 1203
146ProvidingPCC Grade M15 for plain/reinforced concreteinSubStructurecompleteasperdrawingsand technical specifications
147Plain/Reinforced cement concrete(M-20) in substructurecompleteasperdrawingsandtechnical specificationClauses802,804,805,806,807,1202ans 1204
148RCCM25 inDeckSlab:-- Providingandlaying reinforcedcementconcrete insuperstructure(Deck slab M25) as per drawing and technical specificationsClauses 800, 1205.4, 1205.5
149Providing weepholes in brick masonry/stone masonry, plain/reinforcedconcreteabutment,wingwall,return wallwith100mmdiaACpipeextendingthroughthe fullwidthofthestructureswithslopeof1(V):20(H) towardsdrawingfacecompleteasperdrawingand technical specification Clauses 614, 709, 1204.3.7
150Supplying, fitting and placing HYSD bar reinforcementin super-structure complete as per drawing and technical specifications
151Providingandfillingjointsealingcompoundasper drawings and technical specifications with coarse sandand 6 per centbitumen by weight
152Drainage spouts complete as per drawing andtechnical specifications Clause 1209.
153Dismantlingofexistingstructureslikeculverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, includingT&Pandscaffoldingwherevernecessary, sorting the dismantled material, disposal of unserviceablematerialandstackingtheserviceable materialwithallliftsandleadof1000masper Technical Specification Clause 202. Cement Concrete
154Dismantlingofexistingstructureslikeculverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, includingT&Pandscaffoldingwherevernecessary, sorting the dismantled material, disposal of unserviceablematerialandstackingtheserviceable materialwithallliftsandleadof1000masper TechnicalSpecificationClause202.Reinforced
155Dismantlingofexistingstructureslikeculverts, bridges, retaining walls and other structures comprisingofbrickmasonry,includingdisposalof unserviceablematerialandstackingtheserviceable material with all lift and lead of 1000 m as perTechnical Specification Clause 202. Cement mortar
156ADD LABOUR CESS @ 1% (b)
157SEIGNIORAGE FEE (c)
158ADD GST @ 18% on (a+b+c)
159Providingand applyingtack coat with bitumen emulsionusingemulsionpressuredistributoratthe rateof0.25to0.30kgpersqmontheprepared granularsurfacetretaedwithPrimerandclenedwith hydrilocbroomaspertechnicalspecificationaclouse503.
160Providing and laying semi dense bituminous concrete with 100-120 TPH batch type HMP producing an averageoutputof75tonnesperhourusingcrushed aggregatesofspecifiedgrading,premixedwith bituminous binder @ 4.5 to 5 per cent of mix and filler, transportingthehotmixtoworksite,layingwitha hydrostaticpaverfinisherwithsensorcontroltothe required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRTHspecification clause No. 508 complete in all respects.
161Providing and laying of hot applied thermoplastic compound2.5 mmthickincludingreflectorisingglass beads @ 250 gms per sqm area, thickness of 2.5 mm isexclusiveofsurfaceappliedglassbeadsasper IRC:35 .The finished surface to be level, uniform andfree from streaks and holes.
162ADD LABOUR CESS @ 1% (b)
163SEIGNIORAGE FEE (c)
164ADD GST @ 18% on (a+b+c)
1651st Year Operation & Management Cost
1662nd Year Operation & Management Cost
1673rd Year Operation & Management Cost
1684th Year Operation & Management Cost
1695th Year Operation & Management Cost
1706th Year Operation & Management Cost
171ADD LABOUR CESS @ 1% (b)
172SEIGNIORAGE FEE (c)
173ADD GST @ 18% on (a+b+c)
174NAME OF ROAD - KHOJPURA RWD ROAD TO HAJIPURWorking benchmark Pillars - Setting Out Pillars Providing&FixingofWorkingbenchmarkPillars2 nos. per km& 6 Nos. of reference pillars required for1 Km. as per drawings given and direction of E/I
175Referencepillars-SettingOutPillars Providing& Fixing of Working benchmark Pillars 2 nos. per km& 6Nos.ofreferencepillarsrequiredfor1Km.asperdrawings given and direction of E/I
176Clearing and Grubbing Road Land (By manual means) includinguprootingwildvegetation,grass,bushes, shrubs, saplings and trees ofgirth upto 300mm, removals of stumps of such trees cut earlier & disposal of unserviceable materials & stacking of serviceablematerialsto be usedorauctionedupto a lead of 1000 m including removal and disposal of top organicsoil not exeeding150mmin thicknessas per technicalspecificationclause201.1anddirectionof
177Constructionofembankmentwithapprovedmaterial obtained from borrowpits witha liftupto 1.5m, transportingtosite,spreading,gradingtorequired slopeand compactingto meet requirement of Tables300.1and300.2withaleadupto1000masperTechnical Specification Clause 301.5
178Constructionofsubgradeandearthenshoulderswith approvedmaterialobtainedfromborrowpitswithall lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of Table 300.2 with lead upto 1000 m as per TechnicalSpecification.
179Constructionofgranularsub-basebyprovidingwell graded material, spreading in uniform layers with motorgraderonpreparedsurface,mixingbymixin place method with rotavatorat OMC, and compacting withsmooth wheel rollertoachievethe desired density, complete as per Technical SpecificationClause 401. GRADING - II
180WetMixMacadam-Providing,laying,spreadingand compacting graded stone aggregate to wet mix macadamspecificationincludingpremixingthe material with water at OMC in mechanical mixer (Pug Mill), carriage of mixed material by tipper to site, laying inuniformlayersinsub-base/basecourseonawell prepared sub-base and compacting with smooth wheelrollerof80to100kNweighttoachievethedesired density including lighting, barricading and
181Construction of un-reinforced, dowel jointed, plain cement concrete pavement over a prepared sub base with approve grade cement @ 400 kg per cum, coarse andfineaggregateconformingtoIS383,maximum size of coarse aggregate not exceeding 25 mm, mixed inabatchingandmixingplantasperapprovedmix design, transported to site, laid with a fixed form or slip form paver,spread,compacted and finished in a continuousoperationincludingprovisionof contraction,expansion,constructionandlongitudinal joints, joint filler, separationmembrane, sealant primer,jointsealant,debondingstrip,dowelbar,tie rod, admixtures as approved, curing compound,
182Hard Shouldering- Laying brick soling layer on preparedsub-gradewithbrickonendedging according to lines, graded and cross-section shown on the drawing filling joints with sand and earth, spreading 25 mm thick layer of earth over brick soling, watering and rolliing the same with threewheel road roller 80- 100 kN as per Technical Specification Clause 412
183KMStone-ReinforcedcementconcreteM15grade kilometrelocalstoneofstandarddesignasperIRC:8 fixing in position including painting and printing , etc as per drawing and technical specification clause 1703.
184200 M Stone- Reinforced cement concrete M15 grade kilometrelocalstoneofstandarddesignasperIRC:8 fixing in position including painting and printing , etc as per drawing and technical specification clause 1703.
185Painting two coats including primer coat after filling the surfacewithsyntheticenamelpaintinallshadeson new, plastered / concrete surfaces as per drawing and Technical Specification Clause 1701 (For culverts)
186600 mm equilateral & triangle - Providing and fixing of retro-reflectorisedcautionary,mandatoryand informatory sign as per IRC:67 made of encapsulated lenstypereflectivesheetingvideClause1701.2.3 fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground levelasper drawingsandTechnicalSpecificationClause 801
187600 mm circular - Providing and fixing of retro- reflectorisedcautionary,mandatoryandinformatory signasperIRC:67madeofencapsulatedlenstype reflectivesheetingvideClause1701.2.3fixedover aluminium sheeting, 1.5 mm thick supported on a mild steelangleironpost75mmx 75 mmx 6mmfirmly fixedtothegroundbymeansofproperlydesigned foundation with M15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per drawings and Technical Specification Clause 801
188600 mm x 450 mm rectangular- Providingand fixing ofretro-reflectorisedcautionary,mandatoryand informatory sign as per IRC:67 made of encapsulated lenstypereflectivesheetingvideClause1701.2.3 fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground levelasper drawingsandTechnicalSpecification
189Printingnewletterandfiguresofanyshadewith syntheticenamelpaintblackoranyotherapproved colourtogiveanevenshadeasperdrawingsandTechnical Specification Clause 1701
190Providing and laying of hot applied thermoplastic compound2.5 mmthickincludingreflectorisingglass beads@ 250 gms per sqm area, thickness of 2.5 mm isexclusiveofsurfaceappliedglassbeadsasper IRC:35.Thefinishedsurfacetobelevel,uniformandfree from streaks and holes. (PCC)
191ProvidingandfixingoftypicalMMGSYinformatory signboardwithLogo andMaintenanceBoardasper MORD specifications and drawing. Three MS Plates of1.6mmthick,topandmiddleplatedulyweldedwith MS flat iron 25mm x 5m size on back on edges.The lower plate will be welded with MS angle iron frame of 25mmx25mmx5mm.Theangleironframeofthe lower most plate and flat iron frame of middle plate will be welded to 2 nos. 75mm x 75 mm of 12 SWG sheet tubes posts duly embedded in cement concrete M-15 gradeblocksof450mmx 450mmx600mm,600mm below groundlevel.Thetopmost diamondplate will beweldedtomiddleplateby47mmx47mmof12 SWG steel plate tube.All M.S. will be stove enameled onbothsides. Letteringandprintingarrows,border etc. will be painted with ready mixed synthetic enamel paint of superior quality in required shade and colour. Allsectionsofframedpostsandsteeltubewillbe paintedwithprimerandtwocoatsofepoxypaintasper drawing Clause 1701 and Annexure 1700.1
192Earthworkinexcavationforfoundationofstructuresupto 3.0 m depth as per drawing and technical specification clause 1104
193SandFillinginFoundationTrenchesasperdrawing and technicalspecificationClause 1108 - rate as peritem No. 11.2 (I) of Chapter 11
194BrickFlatSolinginfoundation:--BrickFlatSolingin foundationTrenchesasperdrawingandtechnicalspecification Clause 1108
195ProvidingPCC Grade M15 for plain/reinforced concrete in openfoundationscompleteas per drawings and technical specifications Clause 802,803, 1202 & 1203
196Providing and laying 1000 mm DiaRCC pipe NP-3 for culvertson first classbeddingofPCCM10(1:3:6)in singlerowincludingfixingcollarwithcementmortar 1:2 but excluding excavation,protection works,backfilling concrete and masonary works inhead
197Dismantlingofexistingstructureslikeculverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, includingT&Pandscaffoldingwherevernecessary, sorting the dismantled material, disposal of unserviceablematerialandstackingtheserviceable materialwithallliftsandleadof1000masper Technical Specification Clause 202. Cement Concrete
198Dismantlingofexistingstructureslikeculverts, bridges, retaining walls and other structures comprisingofbrickmasonry,includingdisposalof unserviceablematerialandstackingtheserviceable material with all lift and lead of 1000 m as perTechnical Specification Clause 202. Cement mortar
199Removing all types of Hume pipes and stacking including Earthwork and Dismantling of Masonry WorksasperTechnicalSpecificationClause202.Above 600 mm to 900 mm dia Hume pipe
200ADD LABOUR CESS @ 1% (b)
201SEIGNIORAGE FEE (c)
202ADD GST @ 18% on (a+b+c)
203Providing and laying of hot applied thermoplastic compound2.5 mmthickincludingreflectorisingglass beads @ 250 gms per sqm area, thickness of 2.5 mm isexclusiveofsurfaceappliedglassbeadsasper IRC:35 .The finished surface to be level, uniform and free from streaks and holes.
204ADD LABOUR CESS @ 1% (b)
205ADD GST @ 18% on (a+b+c)
2061st Year Operation & Management Cost
2072nd Year Operation & Management Cost
2083rd Year Operation & Management Cost
2094th Year Operation & Management Cost
2105th Year Operation & Management Cost
2116th Year Operation & Management Cost
212ADD LABOUR CESS @ 1% (b)
213SEIGNIORAGE FEE (c)
214ADD GST @ 18% on (a+b+c)

AI Tender Summary

OUR REF NO 50025096
AUTHORITY Government Departments
TENDER VALUE 2.59 Crore
LAST DATE 15-07-2025
Authority
Authority Name Rural Works Department
Work Description Construction and 06 year Routine Maintenance work (output and performance based) for Rural Road/Bridge under Mukhya Mantri Gram Sampark Yojana (AWSESH) of Works division
Basic Detail
Tender No MMGSY(AWSESH-GEN)-Hilsa-22
Bidding Type Tender
Location
City hilsa
State Bihar
Key Dates
Publish Date 05 Jul 2025
Submission Date 15 Jul 2025
Open Date 15 Jul 2025
Finance
Tender Value 2.59 Crore
Tender Fee 10000
EMD 5.19 Lakhs
Exemption Not Available
Document List
50a751d5-ea63-4ee4-a375-91255c3b994e.html
BOQ_221683.xls
SUDHI_GEN_AWSESH.pdf
Tendernotice_1.pdf
CMBD_MMGSY_AWSESH.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Jul 05, 2025
11:30 IST

Tender Published

Tender notice published.

Completed
Jul 15, 2025
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Completed
Jul 15, 2025

Bid Opening Date

Technical bids will be opened and evaluated.

Completed

Tender Documents

Download All (ZIP) ↓
html

50a751d5-ea63-4ee4-a375-91255c3b994e.html

xls

BOQ_221683.xls

pdf

SUDHI_GEN_AWSESH.pdf

pdf

Tendernotice_1.pdf

pdf

CMBD_MMGSY_AWSESH.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender

TenderDetail
Loading tenders